LEIF LEIF. BGT Series. Tanktop Mounted Return Line Filters Max I/min - 10 bar. Patented LEIF elements safeguard filtration quality
|
|
- Kelly Lester
- 7 years ago
- Views:
Transcription
1 GT Series Tanktop ounted Return ine Filters ax. 24 I/min - bar atented IF elements safeguard filtration quality When high flow performance is needed N INNOVTIV GRN FITR FTURING IF IF The GT Series features pre-filtration by means of a magnet column and a full flow bypass with low hysteresis. aximum pressure bar. aximum flow 24 l/min. IF elements available up to 5 l/min. Designed for a wide range of mobile and industrial applications ontact Information: uropean roduct Information entre Freephone: (from T,,, Z, D,, S, FI, FR, I, IT, T, S, S, U) filtrationinfo@parker.com roduct Features: GT features pre-filtration by means of a magnet column. Filter heads with multiple ports available. Flow from inside to out. Full flow bypass with low hysteresis. aximum pressure bar. aximum flow 24 l/min. atented IF elements safeguard filtration quality FD5U.
2 GT Series Tanktop ounted Return ine Filters X 24 I/min - bar Features & enefits Features bar rated filter ast aluminium head IF elements agnetic pre-filtration In-to-Out filtration igh level of customisation Quick response bypass with low hysteresis Standard or customised funnel dvantages an be utilised for severe return line applications ompact profile, lightweight and durable atented element safeguards the use of genuine parts Removes ferrous particles, even during bypass conditions ll captured contamination retains inside the element Dedicated system-matched solutions can be easily made available Reduction of bypass period due to low hysteresis Only a small part of the total flow is bypassing the element nsures that oil enters the tank under the oil level enefits Reduced downtime due to premature filter failures ess weight, smaller envelop and cleaner appearance Guaranteed quality of filtration ontributes to ISO 4 certification Improved fluid cleanliness levels xtended element life time No recontamination of system during change of elements Improved integration of filter in system combined with lower initial system costs Improved protection of system Significant reduction of oil foaming Typical pplications obile cranes xcavators Deck cranes Fire fighting equipment ydraulic presses Waste balers Industrial power units Fork lift trucks The arker Filtration GT Series Tank ounted Return ine Filters. GT tanktop mounted return line filters feature pre-filtration by means of a magnet column and a quick response bypass with low hysteresis. Thanks to the In-to-Out filter principle, contaminated oil cannot leak back into the system. GT Filters are available in versions capable of handling flow rates up to 24 l/min. They can operate with a maximum working pressure of bar. IF elements are available for environment-friendly filtration for versions up to 5 l/ min. 4 FD5U.
3 Specification Operating pressure: ax. bar. ssembly: Tank top mounted. onnections: Flanges S2, 3. Threaded ports and multiple ports available. Filter housing: luminium head and cover. Seal material:, fluoroelastomer, neoprene. Operating temperature range: Seal material : -4 to +. Seal material Fluoroelastomer: -2 to +2. ypass setting Opening pressure.8 /.5 or 2 bar. Other settings on request. Degree of filtration: Determined by multipass test according to ISO 889. Flow fatigue characteristics: Filter media is supported so that the optimum fatigue life is achieved. Filtration media: icroglass III and coglass III for IF elements. lso available μm ellulose and 4μm stainless steel mesh. lement collapse rating: bar (ISO 294). ressure indicator options: Setting.7 or.2 bar. Other settings on request. Visual pressure gauge. lectrical pressure switch. Options: Diffuser type (straight pipe, no perforated plate area) (with closed diffuser end cap and with perforated plate area, recommended when oil entry in reservoir is close to the reservoir bottom or to ensure oil entry under the reservoir oil level) agnetic pack: Standard. Filling port in cover (optional): GT 3 = lugged G /4. GT 4 = lugged G /2. Filter element: IF element with reusable metal element sleeve. onventional style element with steel end caps. The IF element is patented and safeguards the use of genuine parts. Note: IF element can be used with mineral and S type oils. For other fluids consult arker Filtration. IF contributes to ISO 4 quality standards. GT-3 ength and 2 (IF version) Ref. No. Description Nut 2 Washer 3 over 4 over-seal 5 Top-spring ousing 7 Insert-seal 8 lug x 9 onded seal Insert IF element 2 lement sleeve 3 Gasket 4 O-ring 5 ypass set Diffuser GT-4 ength 3 and larger (conventional element) Ref. No. Description Nut 2 Washer 3 over 4 over-seal 5 Top-spring ousing 7 Insert-seal 8 lug x 9 onded seal Insert lement seal 2 lement 3 O-ring 4 O-ring 5 ypass set Diffuser GT-3 (IF version) GT-4 (conventional element) FD5U.
4 GT Series Tanktop ounted Return ine Filters X 24 I/min - bar Specification (cont.) GT-3 with diffuser over - house torque-load 3 Nm Filter - tank torque-load 45 Nm 2 lug x N (d) F S GT length D F G N(d) Q R S U GT R GT5 54 ultipleport connection (3) (55) (55) () (5) +.5 ( ) V W g over - house torque-load 3 Nm Filter - tank torque-load 45 Nm 2 N (d) ØG ØD ØR View - Flange S 2 Used for GT 3S with: - 2 S flanged single port connection ØU ±.5 ±.5 2 N (d) W ØV View - diffuser Used for GT 3S with: - ultiple port connection x2 S flange + 2x /4 S flanges View - Flange S Dimensions in mm GT-3 without diffuser lug x F ØG ØD View - Flange S 2 Used for GT 3S with: ØR - 2 S flanged single port connection S Ø ±.5 ±.5 2 N (d) View - without diffuser Dimensions in mm View - Used for GT 3S with: Flange S 2 - Dual port connection x2 S flange + 2x /4 S flanges GT length D F G N(d) Q R S g. +.5 GT R GT ultiple port connection (.5 )(3) (55) (55) () (5) 42 FD5U.
5 GT-4 with diffuser lug x ØF ØD over - house torque-load 3 Nm Filter - tank torque-load 45 Nm N (d) ØU W ØV View - with diffuser GT length ØD ØF N(d) ØR S ØU ØV W g. 3 GT GT GT R GT GT GT Note: dimensions of GT-24 identical to GT-2. Dimensions in mm GT-4 without diffuser lug x ØF ØD Ø Flange S 3 View - S ØR over - house torque-load 3 Nm Filter - tank torque-load 45 Nm N (d) S Flange S 3 View - ØR View - without diffuser GT length Ø ØD ØF N(d) ØR S g. 3 4 GT GT GT R GT5 GT2 GT Note: dimensions of GT-24 identical to GT-2. Dimensions in mm 43 FD5U.
6 GT Series Tanktop ounted Return ine Filters X 24 I/min - bar Specification (cont.) GT F /4 manifold type - with diffuser GT length GT 42 GT8 53 GT 3 GT5 95 GT28 8 GT248 Dimensions in mm GT F /4 manifold type - without diffuser GT length Dimensions in mm GT 385 GT8 495 GT 598 GT5 878 GT243 GT FD5U.
7 Indicator Options Indicator S pressure switch rotective cap with dual cable duct for, 7-2, 3mm diameter cable Indicator S NO/N pressure switch rotective cover Normally open contacts 75 mp.3x8 terminals 2 3 Switch 74 Normally closed contacts /F = O. 2 = N.. 3 = N.O /F 9 9 Ø3.5 x G /8 (S) Ø28 lec.rating Thread connection lec.connection rotection ode ressure Drop urves Specifications 42V/4 x.3x.8 terminals + protective cap I5 (with cap) terminals I FUS (Switch) Indicator onnection / Filter ead atrix ort(s) Filter head 2" S GT length and 2 3" S GT ength 3 and larger x2"s Flanged +2x /4" S Flanged for GT ength and 2 3x /4" S Flanges + x /2" S for GT ength 3 and larger The recommended level of the initial pressure drop for low pressure filters is max.5 bar. If the medium used has a viscosity different from 32cSt, pressure drop over the filter can be estimated as follows: Δp =(Δp32 x viscosity of medium used) / 32cSt. Filter housing and element pressure drop based on 32cSt fluid viscosity and.87 density. GT mpty ousing 2 S (ength code and 2) Indicator Thread G /8" Specifications lec.rating 42V/2 Thread connection G /8 lec.connection terminal.3x.8 rotection I5 (terminal I) Switch type NO or N ode FUS2G2 (NO switch) FUS3G2 (N switch) Visual indicator code G /8 code.2 bar FUG FUG2G2 GT39 (lement length code ) GT5 (lement length code 2) Q Q Q 2Q Q Q.4 Q.2 2Q FD5U.
8 GT Series Tanktop ounted Return ine Filters X 24 I/min - bar ressure Drop urves (cont.) GT mpty ousing 3 S (ength 3 and larger) GT (lement length code 3) Q.8. 5Q.4 Q Q GT8 (lement length code 4) GT (lement length code 5) Q.8. 5Q.4 Q.2 2Q GT5 (lement length code ) Q.8. 5Q Q 2Q GT2 (lement length code 7) Q Q Q.4 Q..2 2Q Q Q.2 2Q GT24 (lement length code 8) Q Q.4 Q.2 2Q FD5U.
9 ressure Drop urves (cellulose and stainless steel media) GT39 (lement length code ) ellulose & Stainless steel media GT39 (lement length code ) ellulose & Stainless steel media W W GT (lement length code 3) ellulose & Stainless steel media GT8 (lement length code 4) ellulose & Stainless steel media W W GT (lement length code 5) ellulose & Stainless steel media GT5 (lement length code ) ellulose & Stainless steel media W W GT2 (lement length code 7) ellulose & Stainless steel media W ellulose and stainless steel media xample: GT2 Filter lement ength 7 - cellulose and stainless steel media 47 FD5U.
10 GT Series Tanktop ounted Return ine Filters X 24 I/min - bar Ordering Information Standard products table art number GT2QR323 GT22QR323 GT5QR483 GT52QR483 GT7QR483 GT72QR483 Supersedes GTS5-S2 TXW8- T 5 GTS5-S2 TXW8-2 T 5 GTS-S3 TXW2- T 5 GTS-S3 TXW2-2 T 5 GTS2-S3 TXW4- T 5 GTS2-S3 TXW4-2 T 5 Flow (l/min) odel number GT5 GT5 GT GT GT2 GT2 lement length ength 2 ength 2 ength 5 ength 5 ength 7 ength 7 edia rating (μ) Note: Filter assemblies ordered from the product configurator below are on extended lead times. Where possible, please make your selection from the table above Seals Indicator lugged lugged lugged lugged lugged lugged ypass settings.5 ar (22 si).5 ar (22 si).5 ar (22 si).5 ar (22 si).5 ar (22 si).5 ar (22 si) orts 2"S-3 SI 2"S-3 SI 3"S-3 SI 3"S-3 SI 3"S-3 SI 3"S-3 SI Included options Replacement elements Q 93788Q 93782Q 93785Q Q 93785Q Supersedes TXW8- TXW8-2 TXW2- TXW2-2 TXW4- TXW4-2 roduct configurator onfigurator examples filter including IF element ox GT ox 2 5 ox 3 5Q ox 4 ox 5 S ox ox 7 R48 ox 8 onfigurator examples filter including conventional element ox GT ox 2 8 ox 3 2Q ox 4 ox 5 S4 ox ox 7 3R2 ox 8 4 ox ode GT ox 2 Filter type ousing GT39 GT5 GT GT8 GT GT5 GT2 GT24 ode ox 3 lement media Disposable element IF element ellulose Nom. rating Degree of filtration Glass fibre icroglass III (for disposable elements) coglass III (for eif elements) 2Q 2Q 5Q 5Q Q Q 2Q 2Q Wire mesh bs. rating 4W ox 4 Seal material Fluorelastomer Neoprene Seal type ode V on request ox 5 Indicator ressure gauge, setting.2 bar, x ressure gauge, setting.2 bar, G /8 for dual port head ressure switch 42V,.2 bar setting, NO/N, x ressure switch 42V,.2 bar setting, NO with G /8 S ressure switch 42V,.2 bar setting, N with G /8 S ressure switch 25V, NO/N with G /8 ressure switch 22V, NO/N with No indicator, indicator ports not machined No indicator, indicator port plugged Other settings for indicators / gauges on request Note: For all dual head ports for GTS apply G /8 connection for indicators ode G G2 S S2 S3 S4 S5 On request on request ox ypass valve ypass valve.8 bar.5 bar 2. bar for GT-3 series (length and 2) locked bypass Other bypass settings ode X on request ox 7 Filter connection orts 2" S GT length and 2 3" S GT ength 3 and larger x2" S Flanged +2x /4" S Flanged for GT ength and 2 3x /4" S Flanges + x /2" S for GT ength 3 and larger ighlights ey (Denotes part number availability) Item is standard Item is standard green option Item is semi standard Item is non standard Note : art numbers featured with bold highlighted codes will ensure a standard product selection. Note 2: lternate displayed part number selection will require you to contact arker Filtration for availability. ode R32 R48 R32 3R2 Note: Standard items are in stock, semi standard items are available within four weeks ox 8 Options Options No diffuser required with perforated plate area Diffuser type without perforated plate area Diffuser with integrated hose connection No magnets Dipstick lugged filling port and no magnets Diffuser type and no magnets, no magnets, plugged filling port Diffuser type, no magnets, plugged filling port, magnets and filling port Diffuser type, magnets and filling port ir tight diffuser type T ir tight diffuser type Other combinations 48 ode 3 4 on request 5 8 D F G on request FD5U.
11 Ordering Information (cont.) ßx(c)=2 5.% N/ N/ N/ Degree of filtration verage filtration beta ratio ß (ISO 889) / particle size μm [c] ßx(c)= ßx(c)=75 ßx(c)= ßx(c)=2 ßx(c)= % efficiency, based on the above beta ratio (ßx) 9.% N/ N/ 9% N/ % N/ % N/ % edia code 2Q/2Q 5Q/5Q Q/Q 2Q/2Q GT39 GT5 GT GT8 GT GT5 Supersedes spare element table TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW- 9378Q TXW- 9378Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q GT39 GT5 GT GT8 GT GT5 GT2 GT24 Supersedes spare element table TXX TXX TXX TXX TXX TXX3-R TXX TXW Q TXW Q TXW Q TXW Q TXW Q TXW3-R Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW3-R Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW3-R Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW Q TXW3-R Q TXW Q TXW Q ST ST ST ST ST ST ST GT Series Seal its GT Filter connection ort(s) Filter head 2" S GT length and 2 3" S GT ength 3 and larger x2" S Flanged +2x /4" S Flanged for GT ength and 2 3x /4" S Flanges + x /2" S for GT ength 3 and larger Seal kit art Number FD5U.
Tanktop Mounted Return Line Filters. BGT Series. MAX 2400 I/min - 10 bar LEIF LEIF FILTER FEATURING AN INNOVATIVE GREEN. Low pressure filters
GT Series X 2 I/min - bar N INNOVTIV GRN FITR FTURING IF IF 2 ow pressure filters GT Series Features & enefits Features bar rated filter ast aluminium head IF elements agnetic pre-filtration In-to-Out
More informationIn-Tank Mounted Return Line Filters. IN-AGB Series. MAX 2400 I/min LEIF LEIF FILTER FEATURING AN INNOVATIVE GREEN. Low pressure filters
MAX I/min AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF Low pressure filters Features & Benefits Features Filter integrated in tank LEIF elements Magnetic pre-filtration In-to-Out filtration igh level
More informationHydraulic Filtration & Contamination Control Products. Catalogue: FDHB200UK January 2007
Hydraulic Filtration & Contamination Control Products Catalogue: FDHB2UK January 27 Consistent quality Technical innovation Premier customer service Hydraulic, Lubrication & Coolant Filtration High-performance
More informationBGAH Series. Medium Pressure Filters Max. 500 l/min. 25 bar. In-line solution for a straight pipeline. Applications: Contact Information:
BGAH Series Medium Pressure Filters Max. 500 l/min. 25 bar In-line solution for a straight pipeline Pre-filtration by magnet column and a full-flow bypass with low hysteresis. Contamination-proof in-out
More information15/40/80CN Series Medium Pressure Filters Max. 600 I/min - 70 bar
1/4/8CN Series Max. 6 I/min - 7 bar Premium performance for medium pressure applications FEATURING An economical multipurpose filter solution The CN Series utilizes a cast aluminium head and spin-on bowl
More informationReturn line filters. Return line filters
Return line filters Return line filters Index Technical data - 5 Filters series 6 Filters series --3 8 ccessories Spare parts Uni-ardan Italia S.p.. reserves the right to make technical changes to the
More informationEco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
More informationHigh Pressure Filters. 70/70 Eco Series. MAX 450 I/min -420 bar FEATURING. High pressure filters
7/7 Eco eries MAX 5 I/min - bar FEATURING 5 High pressure filters 7/7 Eco eries Features &enefits Features Fatigue tested to full pressure rating everal head options and connection sizes everal bowl lengths
More informationEco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
More informationOUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
More informationNew. absolute filter elements independently tested in the following Institutes: MPH-MPI 02050/7.99/USA 2 COVER INSERT
e s c r i p t i o n MPH and MPI series filters are designed for returnline applications and provide various installation applications. The filters are installed semiimmersed or totally immersed into a
More information15/40/80CN Series Medium Pressure Filters
1/4/8CN Series Medium Pressure Filters Max 32 l/min - 7 bar Global Filtration Technology 1/4/8CN Series TYPICAL APPLICATIONS Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard)
More informationSERIES FRI. Maximum working pressure 20 bar Flow rate to 1200 l/min. s.p.a
SRIS FRI Maximum working pressure bar Flow rate to 1 l/min s.p.a R FRI series filter has been disigned and developed to satisfy the demands pf applications, on return or low preessure line in Hydraulic
More informationMHT. Pressure Filters HIGH PRESSURE INLINE FILTER
MHT Pressure Filters HIGH PEUE INLINE FILTE Pressure Filters MHT MHT 4 MPa ( bar) Port sizes: / / Flow rates: 0 l/min TEHNIAL DATA Max. working pressure: 4 MPa ( bar) Max. testing pressure: 6 MPa (60 bar)
More informationOpen center control block in monoblock design MO-40
Open center control block in monoblock design MO-40 RE 64370 Edition: 02.2015 Replaces: 02.1985 Size 40 Series 1X Maximum working pressure on pump side 350 bar on consumer side 420 bar Maximum flow 680
More informationThe SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron.
D e s c r i p t i o n 500 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron. A major feature of these
More informationUM/22000 5/2 & 5/3 valves, solenoid and pilot actuated ISO 5599-1, ISO size 1, 2, 3 & 4 Sub-base mounted
U/ / & / valves, solenoid and pilot actuated ISO 99-, ISO size,, & Sub-base mounted Steel reinforced main seals 6 bar and bar NOO solenoid pilots with locking or non-locking manual override Low power coils
More informationNORMAN FILTER COMPANY PRODUCT OVERVIEW
NORMAN FILTER COMPANY PRODUCT OVERVIEW LEADING THE WAY IN QUALITY FILTRATION WWW.NORMANFILTERS.COM FILTER ELEMENT INTERCHANGE Tee-Type Filter 4500, 14500, 34500, and 54500 Series Mini Tee-Type Filter 4100
More informationHFS and HFD Series. High Flow Single and Duplex Filters Max. 11200 l/min. 10 bar. Heavy Duty Reliability. Applications: Contact Information:
High Flow Single and Duplex Filters Max. 11200 l/min. 10 bar Heavy Duty Reliability New High Flow Single and Duplex Filters ensure reliability in industrial, marine, and power generation applications up
More information15/40/80CN Series Coreless Medium Pressure Filters
//8CN Series Coreless Medium Pressure Filters //8CN Series Applications Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile Equipment Pilot
More informationSERIES FRI. Maximum working pressure 20 bar F l o w r a t e t o 1 2 0 0 l / m i n. s. p. a
New Headquarters : MP FILTRI S.p.. Italy Via 1 Maggio, n. Pessano con ornago (Milano) Italy Tel. +9./97.1 Fax +9./9741497-974188 email: sales@mpfiltri.com http://www.mpfiltri.com GRT RITIN MP FILTRI U.K.
More informationRMF TANDEM 900 OFF-LINE FILTER SYSTEMS
RMF TANDEM 900 OFF-LINE FILTER SYSTEMS RMF Tandem 900 Off-line filter Systems can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated
More informationFilter Elements E 7.200.9/05.06
HYDAC Filter Elements safeguard the performance and service life of essential and expensive hydraulic components due to their high standard of quality Filter Elements Technical details: Absolute filtration
More informationPOWER PULSE VALVES remote pilot threaded or Quick Mount connection 3/4 to 1 1/2
POWR PULS VLVS pilot threaded or Quick Mount 3/4 to 1 1/2 N 2/2 Series 353 TURS The piston cartridge pulse valves are especially designed for dust collector service applications, combining high flow, long
More informationHOW THE CONTAMINATION IS MEASURED CONTAMINATION CLASSES ACCORDING TO ISO 4406:1999
CONTAMINATION CONTROL in hydraulic systems in the hydraulic system is a very wide and complex matter; the following is just a short summary. Our Customer Service is at your disposal for any further information.
More informationUM/22000 5/2 or 5/3 Solenoid and air pilot actuated soft spool valves
U/ / or / > > Sub-base mounted, 99- s,, or > > Steel reinforced main seals > > Low power coils (,W) > > Wide range of sub-bases and accessories > > 6 bar and bar NOO solenoid pilots with locking or non-locking
More informationDIESEL FUEL CONDITIONING
COD FILTRATION DIESEL FUEL CONDITIONING REMOVE WATER & PARTICLES TO EXTEND FUEL INJECTOR LIFE & INCREASE COMBUSTION ENGINE FUEL EFFICIENCY Remove free water to saturation point with high single pass efficiency
More informationGREAT BRITAIN CANADA MP FILTRI U.K.
New eadquarters: MP FILTRI S.p.. Italy Via Maggio, n. 0060 Pessano con Bornago (Milano) Italy Tel. +9.0/9570. Fax +9.0/957449795788 email: sales@mpfiltri.com http://www.mpfiltri.com GRET BRITIN MP FILTRI
More informationFluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationIndicators Series FPC
Indicators Series FP Max 40 bar Global Filtration Technology FP TYPIAL APPLIATIONS Industrial Equipment Mobile Equipment Marine/Offshore Applications ompetitor Housing The FP range of filter condition
More informationSafety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
More informationFRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
More information12CS Series Coreless Spin-on Filter Max. 75 l/min - 35 bar
2CS Series Coreless Spin-on Filter Max. 7 l/min - 3 bar Environmentally friendly alternative for spin-on filtration Lightweight, non-metallic element that can be incinerated The 2CS Series features a Parker,
More informationCSD WATER REMOVAL FILTERS FOR DIESEL
CSD CSD WATER REMOVAL FILTERS FOR DIESEL Remove water to extend fuel injector life & increase combustion fuel efficiency Remove free water to saturation point with high single pass efficienc (achieve
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
More informationCheck Valves Valve locator
Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()
More informationPiston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
More informationNow Available in Black Zinc Nickel
847/848 Series Power Supply up to 63 Now vailable in lack Zinc Nickel The 847/848 bayonet Series has been especially designed for light and harsh environment. Its physical characteristics and performances
More informationNeedle Valves. Needle Valves Part Matrix. Flow Coefficient (C v ) belgas.net < 129 >
Needle Valves elgs Standard Needle Valves offer four choices in 316 stainless steel as well as one piece forged carbon plated steel; soft seat and hard seat, angle and globe styles. The Mini Valve offers
More informationPVS Series - Models 185, 600, 1200, 1800 and 2700
PVS Series - Models 185, 600, 1200, 1800 and 2700 Reduce the catastrophic results of water contamination Eliminate water from the hydraulic system The PVS Series Portable Purification Systems, available
More information6 Crankcase Ventilation
6 Crankcase Ventilation Introduction... 6-3 Crankcase Ventilation Manager (CVM)... 6-5 Introduction... 6-6 CVM280B..................................... 6-7 CVM280T... 6-10 CVM424B....................................
More informationSeries M Applicable Tubing: ø2 Connection Thread: M3, M5
iniature Fittings Series pplicable Tubing: ø2 onnection Thread:, RoHS ade to Order (Refer to page for details.) pplicable O.D. x I.D.: ø2 x ø.2 onnection thread: / One-touch fitting size: ø.2 / ø Tubing
More informationValve systems Base plates, according to standard ISO 5599-1. Brochure
ISO 5599-1 Brochure 2 ISO 5599-1 Single subbase Single subbase, thread connections on the side standard: ISO 5599-1 Frame size: ISO 1 - ISO 4 compressed air connection output: G 1/4 - G 1 Reversed pressure
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationBreathers and Filler Breathers.
Breathers and Filler Breathers. Your Professional Partner for Breathers and Filler Breathers. HYDAC Quality. HYDAC Filtration Technology is the result of tests carried out in our laboratories and of the
More informationDuplex Filters 40 FLDK 0008(C)-0120(C)
Industrial Filters Accumulators Duplex Filters 40 FLDK 0008(C)-0120(C) Filters for inline installation for continuous operating Ball valve change over Optimised flow characteristics by 3D computer aided
More informationMVX-Series Diesel Engine Shut Down Valves (Cable Operated Closure/Integral Reset Lever Types)
MVX-Series Diesel Engine Shut Down Valves (Cable Operated Closure/Integral Reset Lever Types) Selection, pplication and Maintenance Valve Numbers MVX-301 MVX-302 MVX-303 MVX-501 MVX-502 MVX-503 MVX-801
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationPressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations
VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................
More informationPVS 185, 600, 1200, 1800, 2700 Series Portable Purification Systems
185, 600, 1200, 1800, 2700 Series Portable Purification Systems FEATURING Global Filtration Technology PRINCIPLES OF OPERATION Contaminated oil is drawn into the Parker Portable Purification System by
More informationSCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationMVX-Series Diesel Engine Air Shut Down Valves
MVX-Series Diesel Engine Air Shut Down Valves (Cable operated closure/integral reset lever types) Selection, Application and Maintenance SPECIAL VALVE MVX-304 This is a special version of valve type MVX-303
More informationSeries TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
More informationFlowmeters & Monitors. FDHB347UK August 2007
Flowmeters & Monitors FDH4UK ugust 200 onsistent quality Technical innovation Premier customer service Hydraulic, Lubrication & oolant Filtration High-performance filtration systems for production machinery
More informationTurbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
More informationStandard Specifications Model. How to Order. Mist spray unit. Recommended Equipment. Mixing valve
Mist Spray Unit Series MU/ Intermittent spray to cutting and press gear chains, etc. Standard Specifications MU MU Inlet air Oil tank set range. MPa. to. MPa Oil tank capacity (cm ) Total capacity: Effective
More informationChapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationIn addition, a number of auxiliary options are available (para 2.7) as well as optional slices for special requirements (para 2.8).
DS3002 1. General Description This data sheet describes the Modular Power (MP) Electro Hydraulic Power Units, which have been designed to provide an advanced and flexible means of brake control. The MP
More informationAerospace and Defence
Aerospace and Defence Hydraulic, Fuel, Lubrication and Air Systems World Class Filtration Solutions Porvair Filtration Group Aerospace and Defence Hydraulic, Fuel, Lubrication and Air Systems Porvair Filtration
More informationWorking Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
More information3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationSpare Parts List M96A.24SM/B M96A.28SM/B
*16202390* 162.0239.0 REV5 14/04 2015 Spare Parts List M96A.24SM/B M96A.28SM/B Issue Table description Issue n. of pages Overall view 09/2008 1 C.h. return group and d.h.w. heat exchanger 09/2008 1 C.h.
More informationMPX-Series Diesel Engine Shut Down Valves (Manual Reset / Air Pressure and Manual Closure Options)
MPX-Series Diesel Engine Shut Down Valves (Manual Reset / ir Pressure and Manual Closure Options) Selection, pplication and Maintenance Valve Numbers MPX-300 MPX-301 MPX-302 MPX-303 MPX-310 MPX-500 MPX-501
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationD634-P Series Direct Drive Proportional Valve with Integrated 24 V Electronics ISO 4401 Size 05
D634-P Series Direct Drive Proportional Valve with Integrated 24 V Electronics ISO 4401 Size 05 GENERAL SECTION PAGE MOOG SERVO- AND PROPORTIONAL CONTROL VALVES General 2 enefits and Functionality 3 General
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationHow To Order A Direct Flow Air Cleaner
Reduced Volume - Improved Performance - Flexible Packaging The patented Direct Flow technology provides the flexibility to optimize the air system performance to size ratio, meeting the demands of today
More informationKDG3V-5/7/8, 10 Series
Vickers roportional Valves KDG3V-5/7/8, 1 Series Single-Stage with Hydraulic ilot Operation High Flow roportional Directional Control Valves asic Characteristics Max. pressure.......... up to 35 bar (5
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 2.8 Liter VR6 2V Engine Mechanical, Engine Code(s): AFP 17 Engine-Lubrication (Page GR-17)
17 Engine-Lubrication (Page GR-17) Lubrication system components, removing and installing Oil filter housing, disassembling and assembling Oil pan, removing and installing Oil pressure and oil pressure
More informationGear Type Flow Meter VC
Gear Type Flow eter VC 2 RACHT COR. 86 S Wilkinson Way Unit A errysburg, OH 43551 USA +1 419 874 F +1 419 874 6 flowmeters@krachtcorp.com www.krachtcorp.com Construction and Function 3 4 5 6 2 1 7 Construction
More informationPressure reducing valve, direct operated, Type ZDR 6 D
RE 26 57/2.3 Replaces:.2 Pressure reducing valve, direct operated, ype ZDR 6 D Nominal size 6 Series 4X aximum operating pressure 2 bar aximum flow 5 L/min K 4279/ ype ZDR 6 DP2 4X/ Y Overview of contents
More informationRated Burst Pressure 200 Series: 2.5 : 1 H200 Series: 4 : 1
200 Series 0 to 3000 psig heck Valves H200 Series 0 to 6000 psig heck Valves Features & enefits Quick opening/positive closing Provides a wide range of adaptability Large flow capacity The patented sealing
More informationSolenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
More informationSafety for Hydraulics Leak free check valve, pilot operated, series ERV Cartridge type, two stage
Safety for Hydraulics Leak free check valve, pilot operated, series Cartridge type, two stage prevents a load from falling if a burst occurs in feed pipe hardened seat and poppet prevents creep of hydraulically
More informationBIÇAKLI VANALAR/ KNIFE VALVES
IÇKLI VNLR/ KNIF VLVS FG00 - Knife Gate Valve ORITL VLV SOLUTIONS Operations Handwheel, rising stem: Handwheel: hainwheel: Gear bo: lectric actuator: neumatic double acting: Hand lever: neumatic single
More informationToroidal Conductivity Sensor
Instruction Sheet PN 51A-/rev.C June 2012 Toroidal Conductivity Sensor For additional information, please visit our website at www.emersonprocess.com/rosemountanalytical.com SPECIFICATIONS Wetted Materials:
More information2 & 5-Wire Overfill Sensors
2 & 5-Wire Overfill Sensors Optic overfill sensors detect the presence of liquid at a preset level. The new Civacon Universal 2 & 5-Wire Sensor is fully compatible with all our current Sensors and Monitors,
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationMicro oil-mist lubricator, Series NL2-LBM G 1/4
Version Micro oil-mist lubricator, an be assembled into blocks Mounting orientation vertical Working pressure min./max. 0.5 bar / 6 bar Medium ompressed air Neutral gases Medium temperature min./max. -0
More informationCompact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
More informationball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves
2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating
More informationDuplex Filters 40/160 LD 0003-0045 40/160 LDN 0040-0400. Industrial Filters Accumulators. Filters for inline installation for continuous operation
Industrial Filters Accumulators Duplex Filters 40/160 LD 0003-0045 40/160 LDN 0040-0400 Filters for inline installation for continuous operation With integrated pressure equalisation valve Optimised flow
More informationFilter Housing SG Standard
Page of 7 Filter Housing SG Standard The steel standard filter housings with econometer and pneumatic drain are designed for the purification of compressed air and gases. Due to the modular design of the
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More information4" SUBMERSIBLE PUMPS
4" SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 50/60 HZ Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant
More informationAdams. Spray Lubrication
61 S pray lubrication is a means of lubricating moving machine parts using atomised oil or grease. stream of compressed air delivers a metered quantity of the required lubricant to the point of application.
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationE4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SERIES 51
83 300/100 ED E4E PILOT OPERATED DIRECTIONAL CONTROL VALVE WITH ELECTRIC PROPORTIONAL CONTROL SUBPLATE MOUNTING CETOP P05 p max 250 bar Q max (see specification table) MOUNTING INTERFACE OPERATING PRINCIPLE
More informationPressure regulating valve with modulating kit, type DRV
Operation Installation and Maintenance Instructions Pressure regulating valve with modulating kit, type DRV hp-technik GmbH Industriepumpen-Förderaggregate und Anlagenbau Gablonzer Straße 21 D-76185 Karlsruhe
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationTrouble shooting guide
guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
More informationSpare Parts List Activ A 25C Activ A 30C Activ A 35C Activ A 18S Activ A 25S Activ A 30S
*1756202470* 17562.0247.0 REV3 06/09 2012 Spare Parts List Activ A 25C Activ A 30C Activ A 35C Activ A 18S Activ A 25S Activ A 30S Issue Table description Issue n. of pages Overall view 06/2009 1 C.h.
More information