Pneumatic actuators The Original! Technics of the top class.

Size: px
Start display at page:

Download "Pneumatic actuators The Original! Technics of the top class."

Transcription

1 Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13

2 Table of contents Advantages and your benefits...page 3 Figure: actuator...page Technical data...page Type selection diagramm double-acting actuators...page Type selection diagramm actuators... Page Functions...Page Mounting variations torque table double-acting actuators... Page Torque table Page actuators... + imensional drawing...page Weights, air consumption, measures...page 13 Order references, spare parts...page 1 Product program...page 1

3 Advantages and your benefits Advantages Identical size of single- and double-acting actuators Your benefits istributors have a reduced capital lockup, because they have to store only double-acting actuators. Single acting actuators can be manufactured by simple installation of springs. Safe and easy handling through because of preloaded springs. Standard pivoting angle end adjustment from + to Option: limit adjustment for both pivoting directions (opened and closed position) Sealing wear of butterfly valve is minimized Positively influenced switching characteristics of butterfly valve At ball valves, turbulences are avoided Superior wear resistance through slide bearing of all moving parts Actuator is completely maintenance-free Long service life (up to 1 million switching cycles) All components are corrosion protected Universally usable with any operating condition bar safety springs provide excellent safety conditions Reduced cost of service and maintenance No risk of accident 1 sizes Cost saving through accurate assignment of required torque of the valve Various ISO flange shapes per size Cost saving through flexible automation of valves Anti-blow-out shafts No risk of accident 0, 0, and 20 actuators Covering a wide application range 3

4

5 Technical data Standard version Option System design Pneumatic twin piston actuator 3 position actuators with two extra pistons type GT = double-acting type GT = (spring return) Construction features Rack-and-pinion technique with self-centering piston guidance in casing; : with bar safety springs Installation position Random Standards Interface actuator/valve: Option: Four or eight female threads in the casing alternative fastening and fitting dimensions acc. to IN N ISO 2. Interface actuator/control valve: Acc. to NAMUR or VI/V 3 Interface actuator/signal units: Acc. to VI/V 3 (NAMUR) Option: shaft with inner double- Materials Casing: anodized aluminium alloy Casing: surface treated with epoxy resin Caps: aluminium alloy epoxy coated, Chemical version: double acting: type GC type GT/GT-0 : single acting: type GC plastics, epoxy lacquered Casing: hard coated, PTF-impregnated Shaft: stainless steel AISI 303; Piston/ aluminium alloy, on request AISI 31 toothed rack: type GT/GT-0 + 0: plastics Stainless steel version: see data sheet T/T Shaft: steel, hard nickel plated Shaft: stainless steel Gaskets: NBR (buna N) Gaskets: FKM (Viton) Bearings: easy sliding plastics Ambient- 20 to + C 0 to + C temperature Nominal ouble-acting: 0, 0,, 20 Alternative pivoting angles (e. g. 13 ) pivoting Single-acting: 0 Limit adjustment for both pivoting directions, type B angle Adjustable nominal pivoting angle from + to 3 position actuators: 0-0 -, GT/GT-0 not adjustable 3 position actuators with spring-centered central position Torques 3 to 000 Nm (see diagrams on page +, torque tables on page to ) Control pressure 2 to bar (GT/GT-0 2 to bar) 1 to 1 bar upon request Control medium/ Filtered air; minimum requirements of Can be operated with other non-aggressive, gaseous or fluid quality IN ISO 3-1/class apply for residual oil, media upon request dust and water content

6 Type selection diagram for double-acting actuators (GT) torque requirement [Nm] actuator type GT GT - 2 GT - 20 GT - 2 GT GT - 13 GT - 13 GT - GT - GT - 1 GT - 0 GT - 0 GT - 0 GT - 0 GT - 0 GT , 3,,,, 2 3 control pressure P St [bar]

7 Type selection diagram for actuators (GT) minimum torque torque requirement [Nm] Actuator type with number of springs can be taken from the point of intersection of torque requirement and control pressure. For accurate data see tables on page and ,,,, control pressure P St [bar] GT GT - 2 GT - 20 GT - 2 GT - 1 GT - 13 GT - 13 GT - GT - GT - 1 GT - 0 GT - 0 GT - 0 GT - 0 GT - 0 GT - 0

8 Functions 0º Standard type -º 0º double-acting +º 2 C 2 C ouble-acting function: If the two outer chambers are pressurized via connection '', the pistons will move to each other into base position (0 ). The force of the two pistons is transferred to pinion 'C' via the toothed racks. If connection '2' is pressurized and '' depressurized, then the pistons move away from each other into the 0 position. In this position, the pivoting angle can be adjusted in depressurized condition by ± via the two limit position adjustment screws. Lock with locknut ''. C C Single-acting function In the version, the pistons are pushed back into base position by springs, when connection '2' is depressurized. The number of springs can be adapted to working conditions (2 to 1 pieces). 2 2 Type B with adjustment of position open and closed (not for actuator types GT-0 + 0) 0º -º +º -º 0º +º 2 C F 2 C F Type "B" features a double limit stop. Using screw "" for 0 position and screw "F" for 0 position, you can adjust these two positions by ± independent from each other. (Preferably used for spring-closing butterfly valves and springopening ball valves).

9 Mounting variations 2/2 way pinion mode mounting valve type of variant operation butterfly valve double- double-acting air closed + open closed A * 2/2 way pinion mode mounting valve type of variant operation double- double-acting air closed + open closed A A octagon open double-acting H ball valve and plug valve octagon open double-acting air open + closed F * closed F * closed F open H open H * * We recommend type B * We recommend type B Torques of double-acting actuators type GT [Nm] actuator type control pressure Pst [bar] 2 bar 2, bar 3 bar 3, bar bar, bar bar, bar bar, bar bar bar bar bar GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT GT

10 Torques of actuators type GT [Nm] minimum torque at (detailed torque data - maximum torques can be taken control pressure 3 bar 3, bar bar, bar bar min. torque [Nm] 2, 3,2 3,3,0,2 actuator with number of springs GT-0/0-03 GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 min. torque [Nm],0,0,0,0,0 actuator with number of springs GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 min. torque [Nm],,0,,,0 actuator with number of springs GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 min. torque [Nm] actuator with number of springs GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 min. torque [Nm] actuator with number of springs GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 min. torque [Nm] actuator with number of springs GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 min. torque [Nm] actuator with number of springs GT-1/0-0 GT-1/0-0 GT-1/0-0 GT-1/0-0 GT-1/0-0 min. torque [Nm] 3 actuator with number of springs GT-/0-0 GT-/0-0 GT-/0-0 GT-/0-0 GT-/0-0 min. torque [Nm] 0 actuator with number of springs GT-/0-0 GT-/0-0 GT-/0-0 GT-/0-0 GT-/0-0 min. torque [Nm] actuator with number of springs GT-13/0-0 GT-13/0-0 GT-13/0-0 GT-13/0-0 GT-13/0-0 min. torque [Nm] actuator with number of springs GT-13/0-0 GT-13/0-0 GT-13/0-0 GT-13/0-0 GT-13/0-0 min. torque [Nm] actuator with number of springs GT-1/0-0 GT-1/0-0 GT-1/0-0 GT-1/0-0 GT-1/0-0 min. torque [Nm] actuator with number of springs GT-2/0-0 GT-2/0-0 GT-2/0-0 GT-2/0-0 GT-2/0-0 min. torque [Nm] actuator with number of springs GT-20/0-0 GT-20/0-0 GT-20/0-0 GT-20/0-0 GT-20/0-0 min. torque [Nm] actuator with number of springs GT-2/0-0 GT-2/0-0 GT-2/0-0 GT-2/0-0 GT-2/0-0 min. torque [Nm] actuator with number of springs GT-300/0-0 GT-300/0-0 GT-300/0-0 GT-300/0- GT-300/0- control pressure P St min. and actuator type with number of springs from related data sheets or from actuator calculator programm "easy-bar" available upon request), bar bar, bar bar bar bar bar,,2,,3,,, GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0-0,,0,0,0,,, GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0- GT-0/0- GT-0/0- GT-0/0-, 13,0 1, 1,0 1,0 1, 1, GT-0/0-0 GT-0/0-0 GT-0/0-0 GT-0/0- GT-0/0- GT-0/0- GT-0/ GT-0/0-0 GT-0/0-0 GT-0/0- GT-0/0- GT-0/0- GT-0/0- GT-0/ GT-0/0-0 GT-0/0-0 GT-0/0- GT-0/0- GT-0/0- GT-0/0- GT-0/ GT-0/0- GT-0/0- GT-0/0- GT-0/0- GT-0/0- GT-0/0- GT-0/ GT-1/0-0 GT-1/0-0 GT-1/0-0 GT-1/0- GT-1/0- GT-1/0- GT-1/ GT-/0-0 GT-/0-0 GT-/0-0 GT-/0- GT-/0- GT-/0- GT-/ GT-/0-0 GT-/0-0 GT-/0- GT-/0- GT-/0- GT-/0- GT-/ GT-13/0-0 GT-13/0-0 GT-13/0-0 GT-13/0-0 GT-13/0- GT-13/0- GT-13/ GT-13/0-0 GT-13/0-0 GT-13/0- GT-13/0- GT-13/0- GT-13/0- GT-13/ GT-1/0-0 GT-1/0- GT-1/0- GT-1/0- GT-1/0- GT-1/0- GT-1/ GT-2/0-0 GT-2/0- GT-2/0- GT-2/0- GT-2/0- GT-2/0- GT-2/ GT-20/0-0 GT-20/0-0 GT-20/0- GT-20/0- GT-20/0- GT-20/0- GT-20/ GT-2/0-0 GT-2/0- GT-2/0- GT-2/0- GT-2/0- GT-2/0- GT-2/ GT-300/0- GT-300/0-13 GT-300/0-1 GT-300/0-1 GT-300/0-1 GT-300/0-1 GT-300/0-1

11 imensional drawing version with female square ISO 2 version with double- acc. to ISO 2 SW H x depth ISO L G x depth ISO M G 1/ M x stop position adjuster Ø R Ø H S M x F Z SW H C H flange only with size 0-0 not with GT/GT-0 32 N 0 pivoting angle 0 = A1 pivoting angle 0 = A2 pivoting angle = A3 U Ø T H B W V M x flange size with type of size GT/GT-300 M 1x2 K ISO L Ø 2

12 Weights, Air Consumption, imensions double-acting actuators type GT weight [kg] volume/double stroke [liters] , 0,1 0,1 0,2 0 0,0 1, 1,30 0,2 0,2 0, 0 1, 1,0 2,00 0,0 0, 0, 0 2, 2, 2,0 0,0 0, 1, 0 2,0 2, 3,0 0, 1,00 1,3 0 3,0,00,0 1,20 1,3 2,2 1,20,,20 1,0 2,1 3,2,,00,0 2,0 3,0,00,00,00,0 3,,,0 13 1,0,0 13 1,0 1,0 2,00,00,00 13,00 1 2,,0 2 31,0 3,0,20 1,00 1,00 21,0 20,0,0,00 2,00 31,0 1,00 2,20,00 32,00 3, ,00,00 actuators type GT weight [kg] volume/double stroke [liters] ,3 0, 0-1,00 0,13 0-1,2 0,21 0-2, 0,32 0-2, 0, 0-,00 0,2 1-,20 0, -,3 1,0 -,0 2, , 2, 13-20, 3,0 1-3,,0 2-3,0, ,0 1,00 2-,30 1, ,00 2,00 actuator dimensions type of actuator A1 A2A3 (not for GT) GT / GT -0 GT / GT -0 GT / GT -0 GT / GT -0 GT / GT -0 GT / GT -0 GT / GT -1 GT / GT - GT / GT - GT / GT -13 GT / GT -13 GT / GT -1 GT / GT -2 GT / GT -20 GT / GT -2 GT / GT B C H x depth x depth F G x depth Ø H K L M N Ø R S T H U V W x x1 x1 x1 1x2 1x30 1x30 1x30 22x3 22x3 2x 2x 3x x2 x2 M x M x M x M x M x M x M x 1 M x 1 M x 1 M x 1 M x M x M x M x M x M x M x M x M x M x M x 1 M x 1 M 1 x 2 M 1 x 2 M 20 x 2 M 20 x 2 M 1 x , 1, flange code 3 F03 3 F03 0 F0 0 F0 0 F0 0 F0 0 F0 0 F0 0 F0 2 F 2 F 10 F1 10 F1 1 F1 1 F1 2 F2 2 F0 0 F0 0 F0 0 F0 0 F0 0 F0 2 F 2 F 2 F F F SW H , 2 23, 2 2,3 2 2,3 2 32,3 2 3,3 2 0,3 2, 3,3 2, 3,3 3 3,3 3,3 3,3,3, Z,1 1,1 1,1 1,1 1,1 22,2 22,2 22,2 2,2 2,2 3,2 3,2,2 0,2 0,2 13

13 Order Information G T Z A / G T 0 / 0 0 V 1 F B function = = double-acting type pivoting angle (0, 0, ) number of springs shaftversion Z = double- (with dimension) V = octagon mounting version double limit stop When ordering parts, please indicate the related part number to be found in the price list. By high regulating speed of the valve inadmissible strong brake forces can conduct on the actuator. Remedy: Throttling of the exhaust air or choosing of a bigger size of actuator type. Spare parts for standard and double limit stop version a = B Spare Part Kits Spare kit no. 1 Sealing set, comprising: 3 Spare kit no. 2 Guide part set, comprising: = Seeger circlip ring 2 = Washer 3 = O-ring = Piston guidance ring = Piston = Cap gasket = Cap = Cap screw = Guidance segment = Casing = Shaft = O-ring 13 = O-ring 1 = Upper sliding ring 1 = Lower sliding ring 1 = Spring 1 = O-ring 1 = Cap nut 1 = Set screw 20 = Piston stopper rod 21 = O-ring 22 = Guide bush 23 = Seeger circlip ring 1 Spare kit no. 3 Cap, complete, comprising: not with size 0: Spare kit no. Piston, complete, comprising: 3 not with size 0: Spare kit no. -B Piston, complete, B-Version (left) comprising: 3 Piston, complete, B-Version (right) comprising: 3 a not with size 0-: 23 Spare kit no. Shaft, complete, comprising:

14 in good hands with bar. Automatic-valves Pneumatic actuators 3-way actuator plastic actuator bar-actusign chemical actuator stainless steel actuator miniature actuator bar-acturn Accessories /2-way control valve positioner optoelectric position indicator signal unit optoelectric position indicator SWITCHmaster Interested to know more? o you want detailed information? Visit our homepage 1

15 bar GmbH Auf der Hohl 1 3 attenberg/germany Phone Fax mail: Subject to changes in line with technological advances and data variations. by bar GmbH - XPROSCH

Richter Twin Piston Quarter-turn Actuators

Richter Twin Piston Quarter-turn Actuators Richter Twin Piston Quarter-turn ctuators R ompact Powerful Maintenance-free R ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for Richter

More information

Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP

Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational

More information

AMG PNEUMATIC ACTUATORS. Type SAF/SADF QUALITY IS OUR DRIVE

AMG PNEUMATIC ACTUATORS. Type SAF/SADF QUALITY IS OUR DRIVE AMG PNEUMATIC ACTUATORS Type SAD/SADT Double-Acting Type SAF/SADF Single-Acting QUALITY IS OUR DRIVE Under the names PESCH, AMG and ABK, we are manufacturers and suppliers of complete solutions for valves,

More information

Norbro Series 40R Pneumatic Actuator Double Acting or Spring Return

Norbro Series 40R Pneumatic Actuator Double Acting or Spring Return Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators

More information

Datasheet Pneumatic Actuators PA 30 PA 90

Datasheet Pneumatic Actuators PA 30 PA 90 Datasheet Actuators PA 30 PA 90 Advantages - Integrated NAMUR interface - Fast cycle times - Wide torque range from 8 Nm up to 3840 Nm - Very good price-performance ratio for all types - Easy assembly

More information

Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a

Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial

More information

Tyco PremiAir Pneumatic Actuators

Tyco PremiAir Pneumatic Actuators A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either

More information

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical

More information

SP-AIR SERIES PNEUMATIC ACTUATORS

SP-AIR SERIES PNEUMATIC ACTUATORS SP-AIR SERIES PNEUMATIC ACTUATORS General Features for SP-Air Series Actuator *Rack and pinion design. *The standard actuator configuration has hard anodized aluminum body and epoxy coated end caps. External

More information

Electric Rotary Actuator - On/Off or programmable control actuator

Electric Rotary Actuator - On/Off or programmable control actuator Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type

More information

KTM Pneumatic Actuators AW, AWN series (for large sized valves)

KTM Pneumatic Actuators AW, AWN series (for large sized valves) Pneumatic actuator for large-sized valves, ideally suited for control valves and remotely controlling process lines Features Scotch yoke construction ideal for large sized valves Two pistons in double

More information

PNEUMATIC RACK AND PINION ACTUATORS

PNEUMATIC RACK AND PINION ACTUATORS PNEUMATIC RACK AND PINION ACTUATORS Advanced torque to size ratio Features: Pneumatic Rack and Pinion Actuators 90 Actuation for -way valves (Straight & Angle) 180 Actuation for -way (T-type) valves Actuators

More information

CONTROLS. Series 92/93 Pneumatic Actuators. Technical Manual. A Division of BRAY INTERNATIONAL, Inc.

CONTROLS. Series 92/93 Pneumatic Actuators. Technical Manual. A Division of BRAY INTERNATIONAL, Inc. CONTROLS A Division of BRAY INTERNATIONAL, Inc. Series 92/93 Technical Manual TM-1056 Pneumatic Actuator - 06/20/2014 Bray Series 92/93 Technical Manual - Table of Contents Topic...Page(s) Actuator Installation

More information

Diaphragm Actuators Favorable Variety Pneumatic Diaphragm Actuators Electric Actuators Hydraulic Actuators

Diaphragm Actuators Favorable Variety Pneumatic Diaphragm Actuators Electric Actuators Hydraulic Actuators Favorable Variety Whether rotary or linear with pneumatic, electric, and hydraulic valve actuators from ARCA Regler GmbH, you always have the right solution at hand. ARCA s comprehensive product portfolio

More information

RUBBER SLEEVE KNIFE GATE VALVE

RUBBER SLEEVE KNIFE GATE VALVE RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve

More information

AIR-AIR PRESSURE MULTIPLIER (BOOSTER)

AIR-AIR PRESSURE MULTIPLIER (BOOSTER) AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally

More information

Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value

Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be

More information

KEYSTONE. Keystone MRP and MRA Pneumatic Actuators

KEYSTONE. Keystone MRP and MRA Pneumatic Actuators KEYSTONE A comprehensive range of pneumatic actuators, providing compact, reliable and economical powered operation for all types of quarter-turn valves Features Direct mounting to all Keystone butterfly

More information

TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves

TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

INSTALLATION AND OPERATION MANUAL FOR SBWG SERIES WORM GEAR ACTUATORS

INSTALLATION AND OPERATION MANUAL FOR SBWG SERIES WORM GEAR ACTUATORS INSTALLATION AND OPERATION MANUAL FOR WORM GEAR ACTUATORS Thank you for purchasing our SBWG Worm Gear Actuator. Before installing or operating actuator, please carefully read this manual. The contents

More information

Valv-Powr Series VPVL Stainless Steel Model D Double-Acting and Spring-Return Rack-and-Pinion Compact Pneumatic Actuators

Valv-Powr Series VPVL Stainless Steel Model D Double-Acting and Spring-Return Rack-and-Pinion Compact Pneumatic Actuators Valv-Powr Series VPVL Stainless Steel Model D Double-Acting and Spring-Return Rack-and-Pinion Compact Pneumatic Actuators Valv-Powr VPVL double-opposed piston actuators combine the benefits of high cycle

More information

Short stroke cylinders W series Ø mm

Short stroke cylinders W series Ø mm Short stroke cylinders W series mm The wide product range and unique design make Univer Short stroke cylinders W series essential for all applications where compact overall dimensions and short strokes

More information

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,

More information

Quarter turn actuators DAPS

Quarter turn actuators DAPS Quarter turn actuators DAPS Quarter turn actuators DAPS Key features General Page 11, 26 DAPS -T- Size 0008 8000 -L- Torque 8 8,000 Nm -Y- Swivel angel 0 90 The quarter turn actuators DAPS are specially

More information

Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS

Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature

More information

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also

More information

Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP

Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Application Tight-closing butterfly valve for process engineering and industrial applications DN 50 to 300 NPS 2 to 12 Nominal pressure PN 10

More information

Device description. DDSB Drum brake. Utilisation on at least one vehicle axle.

Device description. DDSB Drum brake. Utilisation on at least one vehicle axle. Tristop Cylinder 925... DDSB Drum brake DDSB Disc brakes Drum brake Disc brakes Application Purpose Utilisation on at least one vehicle axle. Combined spring brake - diaphragm brake chambers (Tristop Cylinders)

More information

kymanual or Automatic - it s your Choice

kymanual or Automatic - it s your Choice . kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.

More information

STANDARD STROKES Ø M 2 P 050 A 0200

STANDARD STROKES Ø M 2 P 050 A 0200 > Cylinders Series 6 CATALOGUE > Release 8.5 Cylinders Series 6 Aluminium profile New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperatures versions ø 32, 40,

More information

USE AND MAINTENANCE MANUAL

USE AND MAINTENANCE MANUAL Note: the numbers in parenthesis refer to the components in the exploded view of page 3 for mod. 52-230 and page 4 for mod. 270-330. VALBIA supplies a range of pneumatic rotary actuators, RACK and PINION

More information

ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP

ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem

More information

2/2 and 3/2 Way Size 6 Seat Valves

2/2 and 3/2 Way Size 6 Seat Valves 2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08

More information

PROFLEX Control Valves

PROFLEX Control Valves PROFLEX Control Valves Globe Control Valves 3-way Control Valves Pneumatic Diaphragm Actuators, Type T Pneumatic Diaphragm Actuators, Type S Pneumatic Screw-in Temperature Controllers Operating Instruction

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to

More information

RC200. Compact Scotch-Yoke Actuators for Quarter-Turn Valves. Established Leaders in Valve Actuation. Fluid Power Actuators and Control Systems

RC200. Compact Scotch-Yoke Actuators for Quarter-Turn Valves. Established Leaders in Valve Actuation. Fluid Power Actuators and Control Systems Fluid Power Actuators and Control Systems Established Leaders in Valve Actuation RC200 Compact Scotch-Yoke Actuators for Quarter-Turn Valves PUB014-001-00 Issue 08/10 Rotork Actuators Quality Controlled

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

Keeping the World Flowing. Fluid Power Actuators Explained

Keeping the World Flowing. Fluid Power Actuators Explained Keeping the World Flowing Fluid Power Actuators Explained Contents Section Page Section Page Definition of Torque 3 Scotch Yoke Actuators 3 Definition of Scotch Yoke 3 Components and Working Principle

More information

System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8

System 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8 System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures

More information

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)

Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431) Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,

More information

Instruction Manual. L20 Agitators Air Motor Pressure Tank Motor Mix Tank Agitator Mix tank Agitator

Instruction Manual. L20 Agitators Air Motor Pressure Tank Motor Mix Tank Agitator Mix tank Agitator L20 Agitators 105450 Air Motor 105451 Pressure Tank Motor 105447 Mix Tank Agitator 105452 Mix tank Agitator Index Section 1.1 General Description 1.2 Operating Principle 1.3 Specification 2.1 Parts Lists

More information

Installation and Maintenance Instructions for: PremiAir Pneumatic Actuators

Installation and Maintenance Instructions for: PremiAir Pneumatic Actuators for: PremiAir Pneumatic Actuators Introduction The Tyco PremiAir Pneumatic Actuator is a compact, rack & pinion design, conforming to European and International standard EN ISO 5211 (preferred dimensions).

More information

Baumann 81000 Mikroseal Control Valve

Baumann 81000 Mikroseal Control Valve Product Bulletin D103340X012 Baumann 81000 Mikroseal Control Valve The Baumann 81000 Mikroseal control valve (figures 1 and 2) is excellent for throttling of liquid or gaseous media, particularly where

More information

Assisted lift operated 2/2-way solenoid valves Type EV250B

Assisted lift operated 2/2-way solenoid valves Type EV250B MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way

More information

AUTOMATION & VALVES. Viking Automation and Valves grows by people who have. several years of experience in the Valve and Automation Industry.

AUTOMATION & VALVES. Viking Automation and Valves grows by people who have. several years of experience in the Valve and Automation Industry. AUTOMATION & VALVES Viking Automation and Valves grows by people who have several years of experience in the Valve and Automation Industry. The markets of the 'oil & gas, energy, nuclear, water treatment

More information

KUBOTA WATER-COOLED DIESEL ENGINE

KUBOTA WATER-COOLED DIESEL ENGINE SPARE PARTS CATALOGUE KUBOTA WATER-COOLED DIESEL ENGINE MODEL: E75N E75NB3 EA300-E2NB1 TABLE OF CONTENTS Fig. No. Description E75N E75NB3 EA300 Page 0001 Crankcase 2 0003 Cylinder Head 3 0004 Gear Case

More information

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24 Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical

More information

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES

PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium

More information

STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies

STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum

More information

EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators

EL-O-Matic F-Series Rack and Pinion Pneumatic Actuators Product Data Sheet May 2015 EF.00.00.EN Rev. 4 Rack and Pinion Pneumatic Actuators High quality and economical actuator Improve plant and operator safety Reliable and flexible in process control Increase

More information

Solenoid Valve Type 3962

Solenoid Valve Type 3962 Solenoid Valve Type 362 x d, x em or without explosion protection, for controlling pneumatic actuators General The Type 362 Solenoid Valve ensures a high level of operational reliability for controlling

More information

4/2-Way Pneumatic Solenoid Valve

4/2-Way Pneumatic Solenoid Valve 4/2-Way Pneumatic Solenoid Valve Robust servo assisted piston valve Service friendly manual override Single or block assembly Explosion-proof versions Type 5413 cam be combined with Type 2508 Cable plug

More information

BEWARE; METAL SURFACES ARE EXCELLENT HEAT CONDUCTORS.

BEWARE; METAL SURFACES ARE EXCELLENT HEAT CONDUCTORS. 1. SPECIAL HAZARDOUS AREAS The Rack & Pinion pneumatic actuators manufactured by Radius are designed to be used in the following potential explosive zones: Zone 1 & 2 for gases and Zone 21 & 22 for dust.

More information

V&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3

V&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3 V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel

More information

Control valves with pneumatic actuators up to 350 C PN

Control valves with pneumatic actuators up to 350 C PN 300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for

More information

FILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS

FILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS 4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to

More information

Single sub-base valve

Single sub-base valve solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet

More information

Experience In Motion. Valtek Spring Cylinder Linear Actuators

Experience In Motion. Valtek Spring Cylinder Linear Actuators Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators

More information

M A N U A L 13-10-05

M A N U A L 13-10-05 Documentation The following information sheets illustrate the description below: 12-WW01-4G-E Sectional view of the lance with main dimensions 12-W101-6G-E Sectional view of the head of the lance with

More information

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...

More information

Proportional pressure regulators VPPE

Proportional pressure regulators VPPE Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/

More information

Max-Air Technology Inc. NAMUR SOLENOID VALVE 4 and NEMA 7. Technical Data. Material

Max-Air Technology Inc. NAMUR SOLENOID VALVE 4 and NEMA 7. Technical Data. Material Technical Data Port connections Inlet and exhaust Outlet DIN connector (NEMA 4 Pictured) NAMUR SOLENOID VALVE NEMAs 4 and NEMA 7 1/4 NPT NAMUR interface 1/2" NPT Pressure Range: 30 to 150 PSI Flow factor:

More information

Solenoid valves 2/2-way direct-operated Type EV210A

Solenoid valves 2/2-way direct-operated Type EV210A Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral

More information

Hydraulic Control Solutions

Hydraulic Control Solutions Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district

More information

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic CL SERIES Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders Pressure Rating: CLA-50 PSI Pneumatic CLH-250 PSI Pneumatic CLH-,500 PSI Hydraulic Construction CLA /4" AND /8" BORES & CLH /8" BORE ONLY CLA

More information

ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions

ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions 4057250/8 IM-P405-16 AB Issue 8 ABV20 Air Actuated Boiler Blowdown Valve Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation 4 Operation

More information

PN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves

PN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves Page 1 of 8 TI-P357-30 CH Issue 8 PN9000 Series Pneumatic s for SPIRA-TROL K and L Series Control Valves Description The PN9000 series actuators are a compact of linear actuators that are available in

More information

3/2-way Solenoid Valve, direct-acting, NC or NO

3/2-way Solenoid Valve, direct-acting, NC or NO 3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined

More information

5080 PUMP PARTS PRICE LIST

5080 PUMP PARTS PRICE LIST ITEM 1 2 2A 5080 Pump Body, 6" 150# Flg., Mech. Seal 1 40803 1 5080 Pump Body, 6" 150# Flg., Packing 1 40804 1 5080 Pump Cover 1 0H1 002 000 Pump Cover Vented - Complete Assembly 5080 Manual 1 300 022

More information

TECHNICAL DATA SHEET LS-1 Limit Switch

TECHNICAL DATA SHEET LS-1 Limit Switch TECHNICAL DATA SHEET LS-1 Limit Switch 2 Otter Court, Raymond, New Hampshire 03077 Tel. (603) 895-4761 FAX (603) 895-6785 www.geminivalve.com DESCRIPTION The LS-1 limit switch easily mounted to any Gemini

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62

Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,

More information

Drive shaft, servicing

Drive shaft, servicing Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 1 Materials 1 Body Ductile Iron GGG40 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE

More information

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves 1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

Hydraulic Accumulators with Back-Up. Nitrogen bottle

Hydraulic Accumulators with Back-Up. Nitrogen bottle Hydraulic Accumulators with Back-Up Nitrogen Bottles 1. GENERAL To complete the range, HYDAC provides a variety of useful accessory products. They guarantee correct installation and optimum functioning

More information

Material test chamber with mechanical convection

Material test chamber with mechanical convection FP series 400 Material test chambers Material test chamber with mechanical convection A BINDER material test chamber with mechanical convection of the FP series provides reliably short drying times and

More information

Control- and feedback head for integrated mounting on Robolux valves Type 2036

Control- and feedback head for integrated mounting on Robolux valves Type 2036 Control- and feedback head for integrated mounting on Robolux valves Type 203 Type 885 Type 88 can be combined with Compact stainless steel design Contactless valve position registration Coloured illuminated

More information

Hydraulic Accumulators with Back-Up. Nitrogen bottle

Hydraulic Accumulators with Back-Up. Nitrogen bottle Hydraulic Accumulators with Back-Up Nitrogen Bottles 1. GENERAL To complete the range, HYDAC provides a variety of useful accessory products. They guarantee correct installation and optimum functioning

More information

Type 3353 Angle Seat Valve

Type 3353 Angle Seat Valve Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat

More information

DOUBLE GATE KNIFE GATE VALVE

DOUBLE GATE KNIFE GATE VALVE DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or

More information

Guide cylinder, Series GPC-BV Ø mm double-acting Plain bearing cushioning: elastic with magnetic piston

Guide cylinder, Series GPC-BV Ø mm double-acting Plain bearing cushioning: elastic with magnetic piston Bosch Rexroth AG Pneumatics Ambient temperature min./max. -10 C / +70 C Medium temperature min./max. -10 C / +70 C Medium Compressed air Max. particle size 50 µm Oil content of compressed air 0 mg/m³ -

More information

Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653)

Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653) SPECIFICATIONS AND PARTS Chain Saws with Chain Brake HPS513CB (45826) and HCS8160CB (45653) Serial Codes GDV and GDL Read and understand all of the instructions and safety information in this manual before

More information

SITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents

SITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force

More information

DR70 Hensim Dirt Runner 70cc Dirt Bike (VIN PREFIX LUAH)

DR70 Hensim Dirt Runner 70cc Dirt Bike (VIN PREFIX LUAH) Page 1 of 20 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR70 Hensim Dirt Runner 70cc Dirt Bike (VIN PREFIX LUAH) DR70 Hensim Dirt Runner 70cc Dirt Bike (VIN PREFIX LUAH)

More information

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"

Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½ to 4 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Rotary actuators Rotary wing drives Series RAK. Brochure

Rotary actuators Rotary wing drives Series RAK. Brochure Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:

More information

Aprilia.no. RS 50 96-98 Eng.6M

Aprilia.no. RS 50 96-98 Eng.6M 01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50

More information

VARIABLE VANE PUMPS V3

VARIABLE VANE PUMPS V3 VARIABLE VANE PUMPS V3 (series 30 and 40) Nominal sizes 12; 25; 40; 63 up to p n 100 bar V g 8.5; 19; 32; 47 cm 3 /rev KE 1015 11/02 replaces 07/97 easy commissioning due to automatic bleed facility low

More information

BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE

BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE

More information

Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N

Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.

More information

T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com

T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition

More information

97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve

97300 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve 9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual

More information

MANUAL. Competence in Functional Safety. Solenoid valves for safety-instrumented systems functional principle and typical applications

MANUAL. Competence in Functional Safety. Solenoid valves for safety-instrumented systems functional principle and typical applications MANUAL Manual Competence in Functional Safety functional principle and typical applications Binary converters Diaphragms Applications SMART IN FLOW CONTROL. SAMSON AIR TORQUE CERA SYSTEM KT-ELEKTRONIK

More information

Compact pressure switch Flameproof enclosure Ex d Model PCA

Compact pressure switch Flameproof enclosure Ex d Model PCA Mechatronic pressure measurement Compact pressure switch Flameproof enclosure Ex d Model PCA WIKA data sheet PV 33.31 for further approvals see page 4 Process Compact Series Applications Pressure monitoring

More information

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496

More information