TRAILER EQUIPMENT. Jockey Wheels & Clamps Fully Zinc Plated. MP431 MP432 MP433 MP435 MP9743 MP810 MP9745. Code No. with clamp. Code No.

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "TRAILER EQUIPMENT. Jockey Wheels & Clamps Fully Zinc Plated. MP431 MP432 MP433 MP435 MP9743 MP810 MP9745. Code No. with clamp. Code No."

Transcription

1 Jockey Wheels & Clamps Fully Zinc Plated. with clamp with clamp 1 480mm Deluxe sliding jockey wheel with 34mm Dia tube with red 1 plastic wheel and solid rubber tyre. Max. 75Kgs 1 5 min 790mm max Deluxe telescopic jockey wheel with 34mm Dia tube with red 1 plastic wheel and solid rubber tyre. Max. 75Kgs MP431 MP mm min 8 max Deluxe telescopic jockey wheel medium duty with 34mm Dia tube with 1 Dia steel wheel and solid rubber tyre. Max. 75Kgs 7 min 9 max Deluxe heavy duty wheel with 42mm Dia tube with Dia steel wheel and solid rubber tyre. Max. 150Kgs MP433 MP mm min 1000mm max Deluxe heavy duty wheel with 48mm Dia tube with steel wheel and solid rubber tyre. Max. nose weight guide 150Kgs MP min 8 max Deluxe heavy duty telescopic jockey wheel with 42mm dia tube and dia steel wheel. Max nose weight guide 500kgs Without clamp MP9743 Recommended clamp MP493 Spare wheel MP mm 190mm 690mm min 920mm max Deluxe heavy duty wheel with 48mm dia ribbed tube with 225mm steel wheel and rubber tyre. Max. nose weight guide 500Kgs Without clamp MP9745 Recommended clamp MP97455 Spare wheel MP min 770mm max Deluxe heavy duty telescopic jockey wheel with 48mm dia tube with steel wheel and rubber tyre. Max. 500Kgs Without clamp MP9741 Recommended clamp MP8125 Spare wheel MP

2 Jockey Wheels & Clamps Fully Zinc Plated. with clamp with clamp 170mm 570mm min 8 max ightweight wheel with 34mm Dia tube with 170mm plastic wheel and solid rubber tyre. Max. 75Kgs 570mm min 8 max Heavy duty wheel with 42mm tube with Dia steel wheel with solid rubber tyre. Max. nose weight guide 150Kgs MP225 MP mm min 8 max Heavy duty wheel with 48mm Dia tube with steel wheel with solid rubber tyre. Max. nose weight guide 150Kgs 2 620mm min 890mm max Heavy duty telescopic jockey wheel with 48mm Dia tube with 2 x 85mm wheel and pneumatic tyre. Max. nose weight guide 150Kgs MP436 MP min 8 max Heavy duty wheel 48mm Dia tube with 2 plastic wheel and solid rubber tyre. Max. 150Kgs Dia 4 300mm 1120mm max 900mm min Heavy duty telescopic folding jockey wheel Dia tube. Max. 400Kgs MP975 MP976 1 Dia 4 300mm 1120mm max 900mm min Heavy duty telescopic automatic folding jockey wheel Dia tube. Max. nose weight guide 400Kgs MP mm 184mm M12 18mm 1 48mm 72mm 75mm Heavy duty 48mm ribbed clamp. Suitable for MP9745, MP9714 & MP9716 MP mm Heavy Duty clamp suitable for MP9741 MP

3 Prop Stands. (supplied without clamps) 34mm 86mm 34mm Dia prop stand 4 long MP220 34mm Dia prop stand 600mm long MP221 34mm 80mm 34mm Dia prop stand 4 long + handle MP mm Dia prop stand 600mm long + handle MP mm 86mm 42mm Dia prop stand 4 long MP492 42mm Dia prop stand 600mm long MP491 42mm 80mm 42mm Dia prop stand 4 long + handle MP mm Dia prop stand 600mm long + handle MP mm 48mm 48mm Dia prop stand 4 long MP mm Dia prop stand 600mm long MP mm Dia prop stand 700mm long + handle MP mm 670mm min 880mm max Deluxe telescopic prop stand with 42mm Dia tube MP438 48mm H Deluxe heavy duty prop stand with 48mm dia ribbed tube 400mm high MP mm high MP Recommended clamp MP97455 M10 M10 M10 55mm 55mm 55mm 34mm split clamp MP222 42mm split clamp MP427 48mm split clamp MP424 M10 M12 M12 133mm 70mm 70mm 34mm deluxe clamp MP223 34mm deluxe heavy duty clamp MP423 42mm deluxe clamp MP224 42mm deluxe heavy duty clamp MP493 48mm deluxe clamp MP812 48mm deluxe heavy duty clamp MP

4 Spare Wheels for Jockey Wheels. 2 dia 22mm Bore 73mm Spare heavy duty wheel to fit MP975 jockey wheel MP mm dia 20mm 43mm 170mm black plastic wheel with solid rubber tyre suitable for MP225 MP226 2 dia 87mm 2 plastic wheel with pneumatic tyre suitable for MP437 dia 20mm 55mm steel wheel with solid rubber tyre suitable for MP227/436 MP228 20mm 82mm MP229 1 dia 1 red plastic wheel with solid rubber tyre suitable for MP431 / dia 80mm 2 steel wheel with pneumatic tyre and offset bearing suitable for sack trucks of max capacity 130kgs MP426 1 dia 12mm 35mm MP430 1 steel wheel with solid rubber tyre suitable for MP433 12mm MP429 65mm 225mm dia 20mm 225mm steel wheel with solid rubber tyre suitable for MP9745 MP97452 dia 20mm 65mm steel wheel with solid rubber tyre suitable for MP9741 / MP9743 MP

5 aunch Trolley Wheels. 385mm Bearing Width 66mm 15" (385mm) launch trolley wheel with pneumatic tyre and polypropylene centre. 1" (25.4mm) plain, tyre width 3 3/4" () 255mm Bearing Width 57.2mm 10" (255mm) sand hopper launch trolley wheel with solid rubber tyre and polypropylene centre. 1" (25.4mm) plain, tyre width 3 3/4" () Bore size 25.4mm (1") MP417 Bore size 25.4mm MP416 Heavy Duty Prop Stands. 180mm 545mm min 890mm max Heavy duty telescopic trailer jack MP mm min 890mm max Heavy duty telescopic trailer jack MP Winch Post & Stems. Zinc plated winch post suitable for most small boat trailers. Easily fitted and suitable for most small hand winches also incorporates a mounting bracket for fitting a bow snubber (MP170, page 48) 34mm Boat bracket stem post 34mm Dia MP477 34mm x 300mm MP473 34mm x 4 MP796 Jockey Wheel & Prop Stand Clamp Accessories Allows jockey wheel clamps to be fitted without drilling the drawbar Easy-fit Jockey Wheel Clamp Fixing Kit Display Packed and drawbars MP x drawbars MP192 69mm Fits MP8125 & MP97455 (also fits MP222, 423, 424 & 427 but with lower weight capacity) 1 180mm Ø 12.5mm Ø 10.5mm 71mm Heavy duty rotating clamp bracket. Allows trailer prop stands and jockey wheels to be secured parallel to the ground when not in use. Max load capacity 500kgs. MP8129 Spare pin & chain assembly MP

6 Boat Brackets and Moulded Rubber Rollers. Keel roller bracket () MP mm 44mm 91mm / 53mm 71mm Keel flat roller suitable for MP4705 Keel roller bracket () Keel roller bracket () MP4635 MP470 MP mm 44mm Spare spindle for MP470 Spare spindle for MP4701 MP47001 MP mm 51mm 57mm / Keel V roller suitable for MP470 () Keel V roller suitable for MP4701 () MP462 MP mm 70mm / Keel flat roller suitable for MP470 () Keel flat roller suitable for MP4701 () MP463 MP mm Keel roller bracket (220mm) MP mm 51mm Spare spindle for MP4703 MP47008 Keel V roller suitable for MP4703 MP mm 76mm 220mm 90mm Parallel side roller bracket zinc plated complete with spindle, washers, split pins, nut and bolt Suitable for use with 34mm stem posts MP477 / MP473 Spare spindle for MP472 MP472 MP mm 1 57mm Parallel side roller suitable for MP472 Single side roller bracket zinc plated complete with spindle, washers,split pins, nut and bolt Suitable for use with 34mm stem posts MP477 / MP473 MP458 MP474 28mm Spare spindle for MP474 MP mm Single side roller suitable for MP474 (2 required per bracket) MP mm 46

7 Boat Brackets and Moulded Rubber Rollers. 3 28mm Double side roller bracket zinc plated complete with spindle, washers, split pins nut and bolt Suitable for use with 34mm stem posts MP477 / MP473 Spare spindle for MP476 MP476 MP mm 29mm Dumbell side roller suitable for MP476 (2 required per bracket) MP mm 102mm 93mm 93mm 262mm 48mm 1 inc bush 93mm inc bush 48mm 93mm 252mm Double castor side roller bracket zinc plated complete with spindle, washers, split pins nut and bolt & bushes for MP4571 Suitable for use with 34mm stem posts MP477 / MP473 Spare spindle for MP4762 Castor side roller suitable for MP4762 (4 required per bracket) Single roller castor bracket zinc plated complete with spindle, washers, split pins nut and bolt & bushes for MP4571 Suitable for use with 34mm stem posts MP477 / MP473 Spare spindle for MP4763 Castor side roller suitable for MP4763 (2 required per bracket) Combination keel V bracket MP4762 MP47602 MP4571 MP4763 MP47603 MP4571 MP mm 71mm Spare spindle for MP4764 Suitable for MP4621 or MP4631 and 2 MP4571 MP mm hole Ribbed roller bracket complete with 2 bushes, washers and split pins MP456 27mm 235mm 34mm 120mm 90mm 3 8mm hole 32mm 27mm Straight ribbed roller bracket complete with 2 bushes, washers and split pins Stem 34mm dia for MP456 and MP4563 Ribbed roller suitable for MP456 and MP4563 (2 required per bracket) MP4563 MP4563 MP4561 MP4561 MP

8 Heavy Duty Boat Rollers. 20mm Keel roller 190mm x 85mm dia MP mm 51mm 85mm 20mm Keel roller 135mm x 75mm dia MP mm 75mm 20mm Side roller 85mm x dia MP174 85mm 113mm 75mm 20mm Bow snubber block 113mm x 75mm x suitable for MP796 trailer winch post MP170 Boat Trailer Blocks Moulded Rubber. 7mm Ø with 17mm Ø counter 145mm 145mm 145mm 20mm 3 500mm mm 6mm Ø 8mm Rubber buffer block with apron 500x360 MP mm 42mm Channel bracket zinc plated complete with fixing nut & bolt suitable for use with 34mm stem posts MP477 / MP473 Side buffer suitable for MP471with 2xM8 fixing studs MP471 MP452 88m 152m Keel block with 2x moulded in M10 plated studs MP450 48mm 203mm 120mm Buffer block with 2 holes for M10 bolts MP453 43m 25m 30m 2 304mm 304mm 38mm 42mm 300mm Buffer block with 3 holes for M10 bolts MP455 48

9 Boat Trailer Blocks Moulded Rubber. Each 70mm 304mm 100mm 70mm Snubber block with 4 holes for M8 bolts MP451 38mm 25mm 115mm 115mm 115mm 44mm Side buffer block with 4x moulded in M8 plated studs MP454 4 Trailer Hinges and Hinge Posts. 15mm 16.4mm 14mm 220mm x MP mm 15mm 16.4mm 14mm 320mm x MP mm 15mm 16.4mm 14mm 420mm x MP mm 15mm 16.4mm 14mm 520mm x MP mm 5mm Bolt on hinge post MP8158 Weld on hinge post MP mm 49

10 Tailgate atches. Each Ø5mm 100mm x 27mm latch MP81301B 100mm x 26mm latch 35mm 27mm 100mm Ø5mm 35mm 26mm MP81302B 100mm 8mm 127mm 47mm 9mm Ø5mm Flat latch plate for MP81301B / MP81302B MP81402B 8mm 127mm 47mm 9mm Ø5mm Indented latch plate for MP81301B / MP81302B MP81401B Ø5mm 35mm 27mm 100mm x 27mm Heavy duty latch MP81305B 100mm 12mm 145mm 47mm 4mm Ø5mm Flat latch plate for MP81305B MP81405B 50

11 Spring oaded Tail Gate atch. Each Ø11mm 36mm Spring latch MP81310B 1 atch plate for MP81310B MP81410B 36mm 55mm Ø11mm Cargo ashing Anchors Ø7mm 72mm 102mm x cargo lashing anchor with eye MP81407B 79mm 102mm Ø7mm 85mm 22mm 62mm 145mm 145mm x cargo lashing anchor with eye MP81408B 22mm 62mm 51

12 Trailer Dropcatch (zinc plated). Display Bulk Packed Packed Pairs Single 12.75mm (1/2" Dia) Display Bulk Packed Packed Pairs Single Dropcatch 12.75mm Dia bolt on complete with nut and washer 71mm 52mm (3/4" Dia) Dropcatch Dia bolt on complete with self-locking nut and washer MP836 MP836B MP838 MP838B 28mm 12.75mm (1/2" Dia) Dropcatch 12.75mm Dia weld on 71mm (3/4" Dia) Dropcatch Dia weld on MP837 MP837B MP839 MP839B 70mm 5mm Display Packed Single Plate suitable for MP836 / 837 MP841 Bulk Packed Single MP841B 91mm 22mm 6mm Display Packed Single Bulk Packed Single 22mm Plate suitable for MP838 / 839 MP840 MP840B U Bolts square corners complete with self-locking nuts and washers. MID STEE Bright Zinc Plated W(mm) MP No. HIGH TENSIE Bright Zinc Yellow Passivated W(mm) MP No. W 40 x x x x x x x x x x MB 911MB 912MB 913MB 914MB 915MB 916MB 922MB 923MB 924MB W 40 x x x x x x x x x x B 911B 912B 913B 914B 915B 916B 922B 923B 924B U Bolt Plates. W W (mm) W W (mm) 6mm MP917B MP918B 6mm MP919B MP920B MP921B 52

13 Trailer Fittings. X Display Packed (2 pcs) Bulk Packed Forged Steel D-Shackle 3.5mm 25mm Display packed MP994 X X 6mm 8mm MP8336 MP8336B MP8338 MP8338B MP833 MP833B 31mm Trailer cover tie down hook black plastic 4mm Bulk packed (single) MP994B 132mm 7mm 22mm 32mm Forged tie down double cleat hook Display packed (single) MP997 Bulk packed (single) MP997B 25mm 5mm 9.5mm Trailer cover tie down button cleat black plastic Display packed MP995 Bulk packed (single) MP995B 63mm 5mm 7mm 5mm Mild steel tie down hook zinc plated Display packed (per pair) MP996 Bulk packed (single) MP996B 152mm 67mm 1 Deluxe heavy duty lamp guard mild steel zinc plated MP mm 75mm Wire lamp guard mild steel powder coated black MP mm 75mm Wire lamp guard mild steel chrome plated MP998 With fixing clips inchpins 45mm 6/8/ Display packed (per pair) 6mm MP420 8mm MP4208 MP421 Bulk packed (per 50) 6mm MP420B 8mm MP4208B MP421B With fixing clips P Dia x W x P 2mm Dia "R" clip 42 x 14 x 14 3mm Dia "R" clip 54 x 18 x 18 4mm Dia "R" clip 74 x 22 x 26 5mm Dia "R" clip 106 x 36 x 30 6mm Dia "R" clip 118 x 42 x 32 7mm Dia "R" clip 172 x 54 x 32 (per 5) R Clips (packed in poly bag) MP83402 MP83403 MP83404 MP83405 MP83406 MP

Trailer Parts. Jockey Wheels. Tow Balls. Couplings. Jockey Wheel Parts. Coupling Locks

Trailer Parts. Jockey Wheels. Tow Balls. Couplings. Jockey Wheel Parts. Coupling Locks Trailer Parts Tow Balls 7115 1 7/8 Machined 7116 50mm Machined 7117 Long Shank 7116A Black Plastic Cover 7116B Chrome Plated Plastic Cover Jockey Wheels 7301 Telescopic 6 clamp 7302 Swivel 6 solid wheel

More information

Galvanized Metal Fenders. Tread Aluminum Fenders. Plastic Fenders. Fender Brackets

Galvanized Metal Fenders. Tread Aluminum Fenders. Plastic Fenders. Fender Brackets Galvanized Metal Fenders Heavy duty stamped fenders are made from 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets not included. Wheel Size Dimensions

More information

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers

More information

ESD-ACCESSORIES. Reasons for this charging are for example: persons and their clothing workplaces including floors packaging constructions and tools

ESD-ACCESSORIES. Reasons for this charging are for example: persons and their clothing workplaces including floors packaging constructions and tools 1. 3 D S s e i r o s s e c c a 3 WORKPLACE SYSTEMS 3.12 ESD ACCESSORIES 2 E ESD-ACCESSORIES ESD (Electro Static Discharge) is the electrostatic discharge of charged objects or persons caused by direct

More information

4,000 6,000 lb. Spring Axles

4,000 6,000 lb. Spring Axles Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle (Stacker) Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad

More information

6,100 7,000 lb. Spring Axles

6,100 7,000 lb. Spring Axles Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Dump Trailers Construction Agricultural Equipment

More information

Organisational Kitchen Fittings Kitchen Cabinet Fittings

Organisational Kitchen Fittings Kitchen Cabinet Fittings Pull-out wire storage basket Finish: Chrome plated Load capacity: 30 kg Installation depth: 400 mm Version: Runners and baskets separated, designed for wardrobe interiors without doors Type of pull out:

More information

2,500 3,700 lb. Spring Axles

2,500 3,700 lb. Spring Axles Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad and tri wheel

More information

O SL. BPW Original spare parts Air suspensions series O / SL / AL BPW BERGISCHE ACHSEN BPW ORIGINAL SPARE PARTS. BPW Original spare parts

O SL. BPW Original spare parts Air suspensions series O / SL / AL BPW BERGISCHE ACHSEN BPW ORIGINAL SPARE PARTS. BPW Original spare parts BPW riginal spare parts Air suspensions // BPW BERGISCHE ACHSEN BPW riginal spare parts Air suspensions series / / BPW RIGIN SPARE PARTS BPW riginal spare parts Air suspensions Contents Page Air suspension

More information

YTE Suspension. Installation & Maintenance

YTE Suspension. Installation & Maintenance YTE Suspension Installation & Maintenance For Your Trailer Axle Suspension Needs Call York : Head Office Singapore YTESuspguide.RevC.May2008 York Transport Equipment (Asia) Pte. Ltd. No. 5 Tuas Avenue

More information

Bunk Slicks. Bolts directly onto carpeted bunk boards. Fits 2 x 6 or 2 x 4 standard bunk boards. Slide on or off with less effort. Easy to Install.

Bunk Slicks. Bolts directly onto carpeted bunk boards. Fits 2 x 6 or 2 x 4 standard bunk boards. Slide on or off with less effort. Easy to Install. Bunk Board Guide On s 24 Part #86123 The 2x4 bunk boards are carpeted. Bunk placement if mounted above frame is 19. Outside of the frame there is 5-11 of side movement. U-bolts and nuts are zinc plated.

More information

spare spare parts parts spare parts spare parts parts for playground equipment Freecall:

spare spare parts parts spare parts spare parts parts for playground equipment Freecall: spare parts spare parts for playground equipment Freecall: 1800 039 449 Email: sales@adplay.net.au parts contents Swing Seats & Accessories Pg 6-9 Rubber Safety Swing Seat 6 Misc Parts & Components Pg

More information

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842 l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load

More information

Internal Strap Assemblies (Box Vehicles)

Internal Strap Assemblies (Box Vehicles) Commercial Body Fittings LOAD Internal Strap Assemblies (Box Vehicles) Part No. Working Buckle Webbing End Fitting Wgt. (kg) Length (mtr) CARG3309B 2.75 Overcentre 50mm Hook/Hook 0.59 CARG3312B 3.66 Overcentre

More information

FTS Industries Fasteners and Fixings

FTS Industries Fasteners and Fixings FTS Industries Fasteners and Fixings Fasteners and Fixings +27 11 878 2600 Rivets Aluminium Rivet Large Flange Aluminium Rivet CSK Rivet Peeled Rivet Aluminium Sealed Rivet Stainless Steel Rivet Multi-grip

More information

UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary

More information

Gate Hardware. Hinges. Gudgeons. Latches. Catches. Locks. Wheels. Tracks. Stops. Hardware Sets

Gate Hardware. Hinges. Gudgeons. Latches. Catches. Locks. Wheels. Tracks. Stops. Hardware Sets Gate Hardware Hinges Gudgeons Latches Catches Locks Wheels Tracks Stops Hardware Sets Phone 0800 428 379 Email enquiries@heritagegates.co.nz Fax 06 344 6793 Hinge Straps H101G 250x50x20mm Hinge Strap Galvanised

More information

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge! Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm

More information

DUMP TARP KITS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS

DUMP TARP KITS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS ELECTRIC TARP & MANUAL SYSTEMS DUMP TARP KITS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS ELECTRIC TARP SYSTEMS MECHANICAL CRANK ARM TARP SYSTEMS MANUAL TARP KITS TRAILER TARP KITS PARTS & ACCESSORIES

More information

Heavy Duty Vertical Brackets

Heavy Duty Vertical Brackets Heavy Duty Vertical s Great for aluminum trailers Heavy duty 1/4 steel brackets are hot dip galvanized for lasting corrosion protection 1/4 heavy duty steel, 5 wide Four different heights to work with

More information

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These

More information

Aluminum Trailer Kit Assembly Overview

Aluminum Trailer Kit Assembly Overview Aluminum Trailer Kit Assembly Overview VERY IMPORTANT: ALWAYS REFER TO YOUR OWNER S MANUAL FOR PROPER OPERATING AND SAFETY INFORMATION REGARDING YOUR TRAILER & PARTS LIST. Step 1: Remove All Parts Remove

More information

G-2. Space Management. Above the Desk Space Management. Tool Bars

G-2. Space Management. Above the Desk Space Management. Tool Bars Space Management Above the Desk Space Management Custom Accents Space Management is designed to create added workspace for the office environment. By placing often used desk items in easy to access storage

More information

Call for Availability

Call for Availability A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You

More information

HARDWARE KENT Queen Street, Horsham, West Sussex, RH13 5AD Tel: Fax:

HARDWARE KENT Queen Street, Horsham, West Sussex, RH13 5AD Tel: Fax: HARDWARE Plain Nut Bright Zinc Plated DIN 934 Product Type Quality Size (A) No./Box P/N o Nut Plain Din 934 Gr.8 bright zinc 5mm 250 84760 Nut Plain Din 934 Gr.8 bright zinc 6mm 250 84761 Nut Plain Din

More information

13 Series Threaded Stem

13 Series Threaded Stem Series Threaded Stem to 60 pounds each Design: heavy gauge cold Finish: bright zinc plating Construction: Axle: /6 diameter bolt Bright Nickel Plating: to to body of --0) VertiLoc Brake: to -- Stem SERIES

More information

TYRE SERVICE TOOLS CHROME VANADIUM 500mm

TYRE SERVICE TOOLS CHROME VANADIUM 500mm CHROME VANADIUM 500mm TYRE SERVICE TOOLS Sarveshwari Engineers 55 Deepali, Pitampura, Delhi- 11004 Tel.: 011-2702750, 011-27021499, Fax: 011-27021129 Website : / Email : info@sarveshwari.com 1 22007 2

More information

Description Photo Factory P/N SuperLift P/N

Description Photo Factory P/N SuperLift P/N Door Parts Specifications Description Photo Factory P/N SuperLift P/N Details UOM 14 Ga Hinge XS001 227-S00-00 14 gauge steel hinge lves. Full body, 2-3/4'' wide. For use with 7/16'' diameter stem rollers.

More information

HARDWARE. Drawer and Cabinet. The following pages offer a comprehensive selection of: Drawer and Cabinet Hardware R2-1 R-7125

HARDWARE. Drawer and Cabinet. The following pages offer a comprehensive selection of: Drawer and Cabinet Hardware R2-1 R-7125 R-7125 CCR-7125 The following pages offer a comprehensive selection of: Drawer and Cabinet HARDWARE R-7133 22- Track Length 1-3/16" R-7126 R-7125 CCR-7125 (30 per display box) Rolled Edge Drawer Track

More information

Bands. REGULAR BRACE BANDS 12 GA. x 3/4 Galvanized. REGULAR TENSION BANDS 14 GA. x 3/4 Galvanized Sack Weight Price Each

Bands. REGULAR BRACE BANDS 12 GA. x 3/4 Galvanized. REGULAR TENSION BANDS 14 GA. x 3/4 Galvanized Sack Weight Price Each Bands REGULAR TENSION BANDS 14 GA. x 3/4 Galvanized Sack Weight Item# Qty. Less Sack Sack 1 3/8" 1 250.12 lbs..36.30 1 5/8" 2 250.14 lbs..38.32 1 7/8" 3 250.16 lbs..40.33 2 3/8" 4 250.22 lbs..42.35 2 7/8"

More information

PORTABLE CARTS & RACKS. Coaching. Storage. What's this? Keep your equipment organised. Easy to move. Easy to assemble.

PORTABLE CARTS & RACKS. Coaching. Storage. What's this? Keep your equipment organised. Easy to move. Easy to assemble. PORTABLE CARTS & RACKS Made from tough PVC Coaching Keep your equipment organised. Easy to move. Easy to assemble. Lockable wheels Rack 3 Layer Multi-functional storage trolley. Three layers bottom two

More information

Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT)

Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Part No. AJS & MATCHLESS WHEELS & BRAKES - NEW PARTS Price (20% VAT) Price (excl VAT) Michelin Inner Tube, 3.00/3.25 x 17" 11.00 9.17 Michelin Inner Tube, 3.25/3.50/4.10 x 18" 13.00 10.83 Michelin Inner

More information

INSTALLATION INSTRUCTIONS JK4102-P / JKCTC2-P / JKCTC4-P JK REAR BUMPER & TIRE CARRIER

INSTALLATION INSTRUCTIONS JK4102-P / JKCTC2-P / JKCTC4-P JK REAR BUMPER & TIRE CARRIER INSTALLATION INSTRUCTIONS JK4102-P / JKCTC2-P / JKCTC4-P JK REAR BUMPER & TIRE CARRIER Remove the factory rear bumper from the vehicle. Retain all factory hardware for use in installation of Hanson bumper.

More information

TECHNICAL MANUAL PIPECLAMP JULY 2013 ROHRVERBINDER ONLINESHOP.DE

TECHNICAL MANUAL PIPECLAMP JULY 2013 ROHRVERBINDER ONLINESHOP.DE TECHNICAL MANUAL PIPECLAMP JULY 2013 ROHRVERBINDER ONLINESHOP.DE Selecting a Fitting fittings are a blackheart malleable casting and are manufactured to BS EN 1562 1997 for the strength requirements. fittings

More information

Hanson Offroad 6951 McDivitt Dr. Bakersfield CA 93313 U.S.A. 877-757-9779

Hanson Offroad 6951 McDivitt Dr. Bakersfield CA 93313 U.S.A. 877-757-9779 Remove stock bumper. Retain the stock bolts that attached the bumper to the sides of the frame. There are four holes in the back of the frame. You will need to enlarge the far right hole using a drill

More information

High Performance Weight Distribution and Dual Cam HP Cequent Towing Products

High Performance Weight Distribution and Dual Cam HP Cequent Towing Products Towing laws vary from state to state, province to province, please check To confirm safety requirements of the state/province where you Are located and towing. WARNING Cequent hitches are designed to safely

More information

High Quality Turn Tables for wheel alignment

High Quality Turn Tables for wheel alignment High Quality Turn Tables for wheel alignment Optimo turn tables are available for all types of alignment equipment, such as optical, electronic conventional or 3D alignment systems. Traditional turn tables

More information

JAMISON MARK IV HORIZONTAL SLIDING DOORS REPLACEMENT PARTS LIST BI-PARTING DOOR SHOWN SINGLE DOOR SIMILAR

JAMISON MARK IV HORIZONTAL SLIDING DOORS REPLACEMENT PARTS LIST BI-PARTING DOOR SHOWN SINGLE DOOR SIMILAR JAMISON MARK IV HORIZONTAL SLIDING DOORS REPLACEMENT PARTS LIST BI-PARTING DOOR SHOWN SINGLE DOOR SIMILAR JAMISON DOOR COMPANY P.O. BOX 70, HAGERSTOWN, MARYLAND, USA 21741-0070 CALL TOLL FREE 1-800-532-3667

More information

E 45 BODY HARDWARE & MIRRORS

E 45 BODY HARDWARE & MIRRORS BRITAX: ELECTRIC HEATED 420 ELECTRIC MIRROR BRITAX ELECTRIC HEATED 420 ELECTRIC MIRROR Two-piece split electric mirror, E compliant Top glass flat, adjusts using electric controller Bottom glass convex

More information

Rating when used as a weight carrying hitch without spring bars:

Rating when used as a weight carrying hitch without spring bars: BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.

More information

BEDFORD DORMOBILE PARTS LIST JUNE 2016

BEDFORD DORMOBILE PARTS LIST JUNE 2016 BEDFORD DORMOBILE PARTS LIST JUNE 2016 FOR UK AND EU REGION REPRODUCTION PARTS FOR YOUR ORIGINAL DORMOBILE BEDFORD CA AND CF CONVERSIONS DORMOBILE LIFTING ROOF PARTS BEDFORD CA & CF Roof vent cover (colour

More information

DRUM ROLLER. FAR-1, Article No. B69-6300-A DRUM CART FOR 200 LITER STEEL DRUMS. Model FK 1029-1 FK 1029-3 FK 1029-2 FK 1029-4

DRUM ROLLER. FAR-1, Article No. B69-6300-A DRUM CART FOR 200 LITER STEEL DRUMS. Model FK 1029-1 FK 1029-3 FK 1029-2 FK 1029-4 DRUM ROLLER Suitable for drums up to 200 liter capacity Made from fire-galvanized sheet steel ø 610 mm, with 4 polyamide swiveling castors ø 75 mm Model FAR-1: closed version with welded leak-proof base,

More information

Tech Line: /5415 Front Strut Frame Installation 2 x3 Box Frame Rails and 1-5/8 Round Tube

Tech Line: /5415 Front Strut Frame Installation 2 x3 Box Frame Rails and 1-5/8 Round Tube Tech Line: 1-561-863-2188 5410/5415 Front Strut Frame Installation 2 x3 Box Frame Rails and 1-5/8 Round Tube These instructions are just one way of properly installing a strut front suspension. Depending

More information

REAR BUMPER INSTALLATION INSTRUCTIONS TOYOTA TACOMA 05-10 (WITH STOCK HITCH)

REAR BUMPER INSTALLATION INSTRUCTIONS TOYOTA TACOMA 05-10 (WITH STOCK HITCH) Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 REAR BUMPER INSTALLATION INSTRUCTIONS TOYOTA TACOMA 05-10 (WITH STOCK HITCH) Please read before beginning Stainless steel hardware

More information

PRODUCT: TJ/LJ Rear Bumper & Tire Carrier READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL M-F 7:00 AM 5:00 PM PST

PRODUCT: TJ/LJ Rear Bumper & Tire Carrier READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL M-F 7:00 AM 5:00 PM PST PRODUCT: TJ/LJ Rear Bumper & Tire Carrier READ INSTRUCTIONS IN FULL BEFORE INSTALLATION. QUESTIONS? CALL 916-631-8071 M-F 7:00 AM 5:00 PM PST REV: C 06-29-2015 II-2841 The MetalCloak experience includes

More information

WHEEL BALANCING ACCESSORIES

WHEEL BALANCING ACCESSORIES WHEEL BALANCING ACCESSORIES Sarveshwari Engineers 355 Deepali, Pitampura, Delhi- 110034 Tel.: 011-27023750, 011-27021499, Fax: 011-270211629 Website : / Email : info@sarveshwari.com 1 1 110001 1 110011

More information

DTU Animal Cart Programme

DTU Animal Cart Programme DTU Animal Cart Programme TECHNICAL 21 RELEASE PIPE AND ROLLER DONKEY CART AXLES Development Technology Unit, Department of Engineering, University of Warwick, Coventry, CV4 7AL UK, tel: +44 (0)1203 523523

More information

2

2 10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot

More information

Couplings & Trailer Support

Couplings & Trailer Support Couplings & Trailer Support Couplings for braked & unbraked trailers Jockey wheels Propstands Jockey Wheels Page Couplings Pages - Contents Page Unbraked Couplings including Dedicated Coupling Locks, up

More information

Cabinet & Drawer Hardware

Cabinet & Drawer Hardware www.crh.com.au SOLUTIONS FOR TRDE Cabinet & Drawer Hardware www.crh.com.au SOLUTIONS FOR TRDE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19 Page 20 CRH Series

More information

Suspension Systems. Center Hanger. Rear Hanger. Front Hanger Tie Plate Equalizer. Underslung Shown

Suspension Systems. Center Hanger. Rear Hanger. Front Hanger Tie Plate Equalizer. Underslung Shown Suspension Systems The suspension systems incorporated into Dexter axles are designed to provide the trailer owner three basic functions: 1. Attach the axle to the trailer 2. Dampen the effects of road

More information

CURTAIN TRACK SELECTION GUIDE

CURTAIN TRACK SELECTION GUIDE TABLE OF CONTENTS Introduction... 1 Curtain Track Selection Guide... 2 Ordering Complete Tracks... 3 100 Series Standard Duty Straight Track... 4 200 Series Black Medium Duty Straight Track... 8 300 Series

More information

Modular Truck Equipment Price List March 1, 2012 800-627-9783 www.ladderracks.com

Modular Truck Equipment Price List March 1, 2012 800-627-9783 www.ladderracks.com System Modular Truck Equipment Price List March 1, 2012 800-627-9783 www.ladderracks.com Christensen Manufacturing Corp., Pennington, NJ 08534 System Modular Truck Equipment Tradesman Package SPECIAL SAVE

More information

TIE DOWNS CARGO CONTROL

TIE DOWNS CARGO CONTROL 138 620 Spicer St., Akron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 620 Spicer St., Akron, OH 44311 800.824.1864 3415 S.W. 6th St., Ocala, FL 34474 800.682.8900 139 140 620

More information

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS 18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre

More information

ILLUSTRATED PARTS LIST

ILLUSTRATED PARTS LIST TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION

More information

TRAILER ACCESSORIES.

TRAILER ACCESSORIES. TRAILER ACCESSORIES 2014 www.dunbier.com DUNBIER PRODUCT LINE UP - 2014 STAINLESS BRAKE PADS DROP DOWN SPARE MOUNT FOLDAWAY BOAT TRAILER HYDRAULIC MECHANICAL BOXED JERRY CAN HOLDER STAINLESS STEEL DISCS

More information

MAXICUT FLEX WING MOWERS

MAXICUT FLEX WING MOWERS MAXICUT 600 FLEX WING MOWERS PARTS MANUAL 5301-04 - 12 Twose of Tiverton Limited 6 Chinon Court, Lower Moor Way, Tiverton Business Park, Tiverton, Devon. EX16 6SS. Telephone: (01884) 253691 Fax: (01884)

More information

Office / Furniture. Cable Covers & Keyboard Tray 16.2. Table Legs 16.3. Desk Locks 16.4. Casters & File Accessories 16.7. CD/DVD Holders 16.

Office / Furniture. Cable Covers & Keyboard Tray 16.2. Table Legs 16.3. Desk Locks 16.4. Casters & File Accessories 16.7. CD/DVD Holders 16. Cable Covers & Keyboard Tray 16.2 Table egs 16. Desk ocks 16.4 Casters & File Accessories 16.7 CD/DVD Holders 16.8 Furniture Feet 16.9 NOVER PRODUCT CATAOGUE 16.1 OFFICE/FURNITURE CABE COVERS & KEYBOARD

More information

HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455

HC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455 HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1

More information

Special modifications available: - lengths - finish/colors/plating/anodizing

Special modifications available: - lengths - finish/colors/plating/anodizing Search Tube,,, Tubing Tube connection components function like industrial Tinker Toys, and can be combined with round or square tubing to build jigs, fixtures, and operating systems. We offer a vast array

More information

Installation Instruction and Owners Manual BLASTER SALT/SAND SPREADERS MOUNTING SYSTEMS for Models: 750 & 750S

Installation Instruction and Owners Manual BLASTER SALT/SAND SPREADERS MOUNTING SYSTEMS for Models: 750 & 750S Form - R October 0 Installation Instruction and Owners Manual BLASTER SALT/SAND SPREADERS MOUNTING SYSTEMS for Models: 0 & 0S Meyer Products LLC reserves the right, under its continuing product improvement

More information

TSLOTS Hardware 06:02

TSLOTS Hardware 06:02 06 TSLOTS HARDWARE This section includes everything you need to build panels and doors for guarding, bi-fold doors, sliding doors or enclosures. If you need something to complete a project and we don't

More information

Pneumatic Applications

Pneumatic Applications Pneumatic s 800-333-493 Pneumatic Control System with separate installation of cables and hoses with conduits 80x40. 15 Pneumatic Profiles 800-333-493 Profiles can be used as support structure and compressed-air

More information

Gooseneck hitches. Benefits of the CURT gooseneck hitch line. 198 GOOSENECK HITCHES curtmfg.com 1.877.curtmfg GOOSENECK HITCHES

Gooseneck hitches. Benefits of the CURT gooseneck hitch line. 198 GOOSENECK HITCHES curtmfg.com 1.877.curtmfg GOOSENECK HITCHES GOOSENECK HITCHES Gooseneck hitches Scan for live digital version Quality craftsmanship and intelligent design define the CURT gooseneck hitch line. Our Double Lock EZr was designed with the dealer and

More information

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no. 5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model

More information

Ariva Powerful Marketing Displays. Exhibit & Display Solutions

Ariva Powerful Marketing Displays. Exhibit & Display Solutions Ariva Powerful Marketing Displays Exhibit & Display Solutions Banner Displays BRONZE BRONZE XL (see page 3) (see page 3) Retractable banner stand Twist-out feet Black or silver finish Silver retractable

More information

UNIT SHELF TYPE "C" SHELVING SYSTEM UNIT SHELF Glass Shelf Installation

UNIT SHELF TYPE C SHELVING SYSTEM UNIT SHELF Glass Shelf Installation 499 TYPE "C" XL-US02C Glass Shelf Installation * Insert clamp fasteners before mounting leveling legs. Glass Thickness 8 or 10mm Overall Height Max. 2600mm (102-3/8") Glass Width Max. 1200mm (47-1/4")

More information

OVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT.

OVERALL CONVEYOR WIDTH STEEL ALUMINUM MODEL # PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. PER FT. 10 FT. 5 FT. Pick Smarter. Pick Better. Pick UNEX. Skatewheel (SW) Skatewheel Gravity Conveyor is ideally suited to convey lightweight packages and where operations require portable or temporary conveyor lines such

More information

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB

More information

ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM. UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN DESIGN

ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM. UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN DESIGN ECLIPSE CHROME WIRE SHELVING ECLIPSE THE ULTIMATE MULTI-PURPOSE SHELVING SYSTEM UP TO 360kg SHELF CAPACITY QUICK & EASY BOLT-FREE ASSEMBLY STRONG, ROBUST & MODERN DESIGN A S S E M B LY Fully Adjustable

More information

13CD609G HP Lawn Tractor (2002) Page 1 of Inch Deck

13CD609G HP Lawn Tractor (2002) Page 1 of Inch Deck 13CD609G063 17.5HP Lawn Tractor (2002) Page 1 of 20 42 Inch Deck 13CD609G063 17.5HP Lawn Tractor (2002) Page 2 of 20 42 Inch Deck 1 16606 1 S Bracket: Retainer Hook 2 618-0565 1 S Spindle Assembly: Pulley

More information

Rig Fittings. PW 8c Turn Buckle 2.5mm, 6ba or 4ba chromed brass wire type. (6ba suits 1m or M, 4ba for 10r and RA class), (3mm available Feb) 3.

Rig Fittings. PW 8c Turn Buckle 2.5mm, 6ba or 4ba chromed brass wire type. (6ba suits 1m or M, 4ba for 10r and RA class), (3mm available Feb) 3. 26 PW 8c Turn Buckle 2.5mm, 6ba or 4ba chromed brass wire type. (6ba suits 1m or M, 4ba for 10r and RA class), (3mm available Feb) 3.05 pw8c PW 8d Turn Buckle 4ba alloy black anod. wire type less than

More information

SHELVING SHELVING ACCESSORIES TROLLEYS HARDWARE BARWARE KITCHEN EQUIPMENT HOSPITALITY FURNITURE.

SHELVING SHELVING ACCESSORIES TROLLEYS HARDWARE BARWARE KITCHEN EQUIPMENT HOSPITALITY FURNITURE. SHELVING SHELVING ACCESSORIES TROLLEYS HARDWARE BARWARE KITCHEN EQUIPMENT HOSPITALITY FURNITURE Barware MOULDED GLASS BASKET Mantova s moulded Real Tuff ABS glass baskets offer years of rust free use.

More information

Class 8 Truck Accessories 2013/2014. Tool Boxes n Cab Racks n Droms n Fenders

Class 8 Truck Accessories 2013/2014. Tool Boxes n Cab Racks n Droms n Fenders Class 8 Truck Accessories 2013/2014 Tool Boxes n Cab Racks n Droms n Fenders 2 STANDARD BOX CONFIGURATIONS Steel and Aluminum Styles ALL STANDARD DIMENSIONS SHOWN IN THIS BROCHURE ARE LISTED IN THIS ORDER:

More information

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic

CL SERIES. Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders. Pressure Rating: CLA-150 PSI Pneumatic CLH-250 PSI Pneumatic CLH-1,500 PSI Hydraulic CL SERIES Heavy-Duty Clamp Pneumatic & Hydraulic Cylinders Pressure Rating: CLA-50 PSI Pneumatic CLH-250 PSI Pneumatic CLH-,500 PSI Hydraulic Construction CLA /4" AND /8" BORES & CLH /8" BORE ONLY CLA

More information

2007 Hummer H3. 2007 SUSPENSION Rear Suspension - H3. Fastener Tightening Specifications Specification Application

2007 Hummer H3. 2007 SUSPENSION Rear Suspension - H3. Fastener Tightening Specifications Specification Application 2007 SUSPENSION Rear Suspension - H3 SPECIFICATIONS FASTENER TIGHTENING SPECIFICATIONS Fastener Tightening Specifications Specification Application Metric English Leaf Spring to Front Bracket Nut 125 N.m

More information

CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS

CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS Sunrise Medical is ISO 9001 certified, which ensures quality at all stages of the development and production of this hoist. Contents MODEL SERIAL NO.

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

Red: PAINTED ITEMS Blue: KITS

Red: PAINTED ITEMS Blue: KITS PART NO. QTY. DESCRIPTION 01-0011 2 ½ -13 UNC x 3 Bolt 01-1331 2 ½ -13 UNC x 2¾ Bolt 01-4042 5 BOLT BH,½ -13 x 1¾'' ZINC 01-4051 2 BOLT BH, 3/8-16 x 1'' ZINC 5 BOLT BH, ½ -13 x 3" ZINC 5 BOLT BH,½ -13

More information

Saferand easierinstallation

Saferand easierinstallation EN 85-07 Saferand easierinstallation IföSigninstallationsystem andifösignbuilt-incistern www.ifosanitar.com/sign Aneffectivesolution withmanyadvantages. Ifö Sign installation system makes life a little

More information

Burbank, CA Headquarters. Casters- Furniture, Institutional, Specialty. Leveling Glides- Light, Heavy Duty. Adjustment Knobs

Burbank, CA Headquarters. Casters- Furniture, Institutional, Specialty. Leveling Glides- Light, Heavy Duty. Adjustment Knobs For over 25 years, MDI has been a leading supplier of quality products to the furniture, healthcare, display, beauty supply & technology industries. Our goal at MDI is to be your "Direct Source" for quality

More information

Hinges CLAMP-ON HINGE

Hinges CLAMP-ON HINGE CLAMP-ON HINGE Post Gate Qty. Per PRICE EACH Kit# Item# Size Frame Size Sack Less Sack Sack A1 91000 1 1 25 6.97 5.81 A2 91001 1 1/2 1 25 6.97 5.81 A3 91002 2 1 25 7.33 6.11 A4 91003 2 1/2 1 25 7.33 6.11

More information

Carton - Straight Link Machine Chain (Order Unit is Feet )

Carton - Straight Link Machine Chain (Order Unit is Feet ) Straight Link Machine Individual chain links shown actual size in reference section page 44. Carton Uses: General utility; farm and animal Standard Material: Low carbon steel Standard Finish: Bright (BRT),

More information

.2 Section Waste Management and Disposal..4 Section Testing, Adjusting and Balancing (TAB) of Mechanical Systems.

.2 Section Waste Management and Disposal..4 Section Testing, Adjusting and Balancing (TAB) of Mechanical Systems. Issued 2006/08/01 Section 15072 Vibration Isolation Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal.3 Section 03300 Cast

More information

DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information

DANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,

More information

UDL. up to QUICK. boltless. Expo Shelving. Adaptable Boltless System.

UDL. up to QUICK. boltless. Expo Shelving. Adaptable Boltless System. UDL up to QUICK 500 assembly system kg boltless Expo Shelving Adaptable Boltless System www.ancostorage.co.uk Expo shelving has been sold to thousands of customers for the past 2 years Index 5 6-7 8-9

More information

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS 2012/04/19 TECHNICAL SPECIFICATIONS Elite LOADER BOOMS Main boom: rectangular structure 6" x 8" (152 mm x 203 mm) made of high tensile steel Stick boom: rectangular structure 6" x 6" (152 mm x 152 mm)

More information

Exclusive Glass Door Hardware by Izerwaren.Com

Exclusive Glass Door Hardware by Izerwaren.Com Exclusive Glass Door Hardware by Izerwaren.Com CHROME PLATED BRASS GLASS DOOR LATCHES for 3/8 to 1/2 inch thick glass 316 STAINLESS STEEL GLASS DOOR HINGES for 3/8 to 1/2 inch thick glass Glass Door /

More information

Section #7 Pictorial Table Of Contents. Self Tapping Screws. Pages 918-919 Page 918 Pages 920-921. Tool Hangers. Page 926 Page 927.

Section #7 Pictorial Table Of Contents. Self Tapping Screws. Pages 918-919 Page 918 Pages 920-921. Tool Hangers. Page 926 Page 927. Introduction To Section # Pictorial Table Of Contents How To Order End Caps Self Tapping Screws T-Slot Covers T-Slot Tread Strips Metric Laminated Table Tops & Kits Page 916 Page 91 Pages 918-919 Page

More information

CONTENTS CATALOGUE 6 TRAILER SUSPENSION PARTS. (Equalisers & Parts)

CONTENTS CATALOGUE 6 TRAILER SUSPENSION PARTS. (Equalisers & Parts) TRAILER SUSPENSION PARTS (Equalisers & Parts) CONTENTS EQUALISER AND RADIUS ROD SPINDLE KITS...1 DRAWBAR PIVOT KITS...1 HANGARS AND PARTS...3 LUSTY... 3 SCANIA TWIN STEER... 3 HANGAR TO EQUALISER BUSH

More information

FLEXTRAY - Hanging Support Methods

FLEXTRAY - Hanging Support Methods 18 Eaton s B-Line series FLEXTRAY Wire Basket Accommodates 1 /4" and 3 /8" rod sizes Installs quickly with a screwdriver or pliers thus reducing installation time Requires only one hex nut (not included)

More information

Seatbelts Belts and Buckles

Seatbelts Belts and Buckles Seatbelts Belts and Buckles PSV/12/495 Seat Belt Buckle, 220mm Overall Length PSV/12/496 Seat Belt Buckle, 320mm Overall Length PSV/12/497 Seat Belt Buckle with Adjustable Strap, Up to 480mm Overall Length

More information

GMP C2 LASHER PARTS IDENTIFICATION GUIDE for model series 71422

GMP C2 LASHER PARTS IDENTIFICATION GUIDE for model series 71422 GMP C2 LASHER PARTS IDENTIFICATION GUIDE for model series 71422 Effective March 15, 2015 Exclusive Distributer for GMP Lasher Parts NOTES 2 Strand Lock Release Snubbing Lashing Wire Tension Pulley Front

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

Wheel Chock And Workshop Products

Wheel Chock And Workshop Products V-4 30-Oct-13 Leaders in design and manufacture of polyurethane, Wheel Chock And Workshop Products To be the preferred supplier to the mining, manufacturing and automotive industries for Polyurethane,

More information

CZ-MX 125/250/ CHASSIS PARTS KATALOG II 7/2015

CZ-MX 125/250/ CHASSIS PARTS KATALOG II 7/2015 CZ-MX 125/250/360-380-400 CHASSIS PARTS KATALOG II 7/2015 PLEASE NOTE: All prices are quoted in New Zealand Dollars. For a quote in any other currency please contact me by email and provide the delivery

More information

FENCE & GATE FITTINGS

FENCE & GATE FITTINGS FENCE & GATE HIGH SECURITY & ACCESSORIES Bulldog Spike Razor Top - Galvanised CODE CODE DESCRIPTION WEIGHT PRICE P/COAT PBRT H50xW110mm SPIKE - 800mm LONG 1.1Kg Curved base suitable for round pipe or any

More information

EZ Dock. Standard Accessories Catalog

EZ Dock. Standard Accessories Catalog EZ Dock Standard Accessories Catalog Spring 2011 This page intentionally left blank EZ Dock Standard Accessories Catalog - Spring 2011 Table of Contents 12 Inch Cleat 1 8 Inch Cleat 1 Aluminum Railing

More information

POWERS Controls No. 4 Pneumatic Damper Actuator

POWERS Controls No. 4 Pneumatic Damper Actuator POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000

More information