Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A Çağlayan / Istanbul

Transcription

1 Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A Çağlayan / Istanbul Tel: Faks: Website: info@alaks.com.tr

2 1160F Aluminum Corner Joint Code L H Quantity 1160F 24mm 10.5mm 250 PCS 1161F Aluminum Corner Joint Code L H Quantity 1161F 18,9mm 10.6mm 250 PCS

3 Aluminum 1168 Corner Joint Code L H Quantity 1168F 33,8mm 10.6mm 250 PCS Aluminum 1129 Corner Joint Code L H Quantity 1129F 26,1mm 10.4mm 250 PCS

4 1199F Aluminum Corner Joint Code L H Quantity 1199F 40,8mm 14mm 250 PCS Aluminum 1120 Corner Joint Code L H Quantity 1120F 28,4mm 14.6mm 250 PCS

5 Aluminum 1137 Corner Joint Code L H Quantity ,4mm 34.5mm 150 PCS Aluminum 1138 Corner Joint Code L H Quantity 1138F 24mm 26mm 250 PCS

6 Tropicalized Corner Joint Code Finish L Quantity mm 200 PCS 1455 Basic kit for sliding windows Code Quantity SET 1456-B Basic kit for sliding window 1255 Hexagonal keys Code Quantity SET

7 1255 3MM MM MM Quantity 50 PCS in a box 1275 Telescopic bar Quantity 20 SET in a box 1275 inox Telescopic bar Quantity 20 SET in a box

8 Aluminum alignment Corner Joint Fuji 2000 The first alignment corner joint with the locking function. Fuji has a newest system attack of two adjustable eccentrics that permits to have a perfect angle and shuts the corner perfectly. Quantity: 250 PCS

9 Montibianco3_0365S Corner joint brackets for aluminum sections, with spring loaded buttons facing outside, tightening screw-bolts and nuts fastened on to the aluminum. Quantity: 250 PCS Bottom clamp Exterior clamp Threaded fastening

10 Montibianco 0404 Corner joint brackets for aluminum sections, with spring loaded buttons facing outside, tightening screw-bolts and nuts fastened on to the aluminum. Quantity: 250 Pcs

11 Montibianco3 _0484S Corner joint brackets for aluminum sections, with spring loaded buttons facing outside, tightening screw-bolts and nuts fastened on to the aluminum. Quantity: 250 Pcs Bottom clamp Exterior clamp Threaded fastening

12 Cremone bolts and handles Cremone bolt and handles 'Pulchra' series Art Cremone bolt for inwards opening WITH NYLON BASE The case and handle are die-cast aluminum. The inner guide is nylon. The base is made from nylon or zamak. The internal mechanism is made from low friction metal. Spring loaded ball detent. Fixing hole centers 104 mm / 130 mm Supplied with M4x12 pan head cross-recessed screw Finishes Painted in RAL colors Availability 40 pieces in boxes of 20

13 Cremone bolts and handles Cremone bolt and handles 'Pulchra' series Art. 190 c Cremone bolt with key for inwards opening. The case and handle are die-cast aluminum. The inner guide is nylon; the base is zamak. The internal mechanism is made from low friction metal. Spring-loaded ball detent. Fixing hole centers 104 mm / 130 mm Finishes Painted in RAL colors. Supplied with M4x12 pan head cross-recessed screw Availability Boxes of 20 pieces

14 Tilt and turn system European Groove Art Long arm [from 555 mm to 1700 mm] Stainless steel rod, aluminum alloy sliding rod, black galvanized mazak (zamak) mechanism, stainless steel screws and pivots Packed as: boxes of 10 pieces

15 Tilt and turn system European Groove Art Basic mechanism for martellina bolt Thrust redirection, mechanism with locking capability, upper striker plate, tilt and turn safety mechanism, mechanism Art. 0011, lower striker plate, end piece, tilted casement striker plate, casement sash stay Packed as: boxes of 20 pieces

16 Tilt and turn system European Groove Art Pair of hinges for casement without handle Pair of reversible hinges for paired casement window. Supplied with prefitted plates and fixing screws Finishes Painted in RAL colors, available in brass range finishes Packed as: boxes of 10 pairs

17 Tilt and turn system European Groove Art Short arm [from 395mm to 555mm] Stainless steel rod, aluminum alloy sliding rod, black galvanized mazak (zamak) mechanism, stainless steel screws and pivots Packed as: boxes of 10 pieces

18 Tilt and turn system European Groove Art Vertical lock for casement with Cremone bolt 1 receiving piece, 1 register, 1 fixing screw Packed as: boxes of 10 pieces

19 Tilt and turn system European Groove Art Basic mechanism Supplied with - Cremone bolt, stainless steel fixing plate, thrust redirection mechanism with locking capability, upper receiving, safety mechanism, cremone bolt guide, lower receiving piece, end piece, tilted casement, sash receiving piece, casement sash stay, upper and lower hinges Finishes - RAL colors, brass range finishes Packed as - 10 mechanisms in boxes of 5 pieces

20 Cremone bolts and handles Cremone bolt and handles 'Pulchra' series Art. 201 Double handle made from die-cast aluminum Suitable for right-hand and left-hand opening. Spring return, rotatable cover for ease of installation Supplied with Square section shaft 8x8, 3.9x13 countersunk cross-recessed screws Finishes Painted in RAL colors Packed as 20 pieces in boxes of 10

21 Cremone bolts and handles Cremone bolt and handles 'Pulchra' series Art. 224 Escutcheon Painted in RAL colors Packed as boxes of 20 pieces

22 Hinge Art REVERSIBILE HINGES FOR RAPID ASSEMBLY WITH PREMOUNTED PLAQUE can be fitted on the assembly profile without any further operation. Available in versions: 1 Zamak plaque, pivot and screws in galvanized steel 2 Zamak plaque, pivot in galvanized steel, screws in stainless steel 3 - Stainless steel plaque, pivot in galvanized steel, screws in stainless steel 4 - Plaque, pivot and screws in stainless steel Finishes RAL colours, anodised bronze, anodised silver, shiny brass, anodised brass, satin chrome Packed as - Boxes of 50 pieces

23 Accessories for sliding windows Rollers for sliding Art One wheel adjustable carriage Availability Bags of 4 carriages, boxes of 25 bags

24 Tilt and turn system European Groove Art Additional vertical lock 1 thrust redirection mechanism, 2 locks, 2 striker plates Packed as: boxes of 10 pieces

25 Galiplus 2 Galiplus 2 mechanism (130 kg capacity load) Tilt-and-Turn for the European section profiles. The Ral certificate has been obtained for wings of up to 130 Kg and then do not need the auxiliary kit for the extra load. The principal prerogative, apart from excellent resistance, is the simplicity and quickness in assembling the whole mechanism. The corner-transmission is ambidextrous, the hinge fastening counter-plate are already pre-mounted and are in stainless steel. The lower hinge screws are positioned frontally for a quick and safe assembly; while those for the upper hinges are inclined so as to make the fixing extremely easy. The lower hinge can be adjusted vertically (-0.5/+4mm) and horizontally (-1/+1mm) with the window completely closed. The adjustable arm and locking points are made of stainless steel.

26 Venice hinges Venice Baby hinge with fast clamping They can be assembled on window profiles with no need of further processing. They can be horizontally adjusted (of +/- 1 mm) when the door is closed only. Due to their fast assembly and to the same strength characterizing the traditional door hinges, they proved to be particularly suitable for small not too heavy main doors, balcony doors and shutters in general.

27 Horus handles Horus handle 2051 A handle on pressure die-cast aluminium for door with a snap-back action and screw-cover base. The handle and base are in pressure die-cast aluminium and the rotating bush in nylon. The spring and washes are in stainless steel. It comes with an 8mm square pivot and fixing screws in galvanised steel.

28 Blitz hinges Blitz 2 leaves hinge The hinge body is in anodised extruded aluminium or painted. The rotating pivot in stainless steel. The rotating bush in self-lubricating nylon. The fixing screws and plates are in stainless steel and pre-mounted. It's also possible to use eccentric-bushes, to adjust the distance between the sash and the frame.

29 Nefer cremone bolts 0760BI Nefer Cremone Bolt 0761BI Nefer Cremone bolt with key Nefer cremone bolt for internal opening Single or double-fork cremone bolt entirely in pressure die-cast aluminium and painted. This is available in two different models for the position of the anchoring screws. It comes in a standard version or with lock.

30 Part no 1508 bidirectional latch Part no 1508 bidirectional latch Latch in stainless steel with bidirectional lever movement. One of its major advantages is the non-contemporary lock of the two rods: the lower rod locks on the frame prior to the upper one, thus allowing the correct sash alignment as well as the correct fit in of the rod terminals with their keepers. It is commonly used on double groove profiles (Tee or reversion profiles) and if combined with the appropriate rod terminals it can fit either only-turn or tilt and turn openings. It can be used on European groove profiles (14x18-15x20-13,6x16,8 grooves), All.co 5 Sormonto and Nuovo NC 40 Sormonto.