PRODUCT INDEX FLOORING HANDRAILING STAIRTREADS MISCELLANEOUS
|
|
- Kathlyn Flynn
- 7 years ago
- Views:
Transcription
1 FOORING PRODUCT INDEX AUMINIUM TREAD PATE 7 DURBAR STEE FOOR PATE 7 EXPANDED META AKAY MESH 5 GASS FIBRE FOORING AND FOOR PATE 8, 9 GRATING 5 OPEN STEE FOORING 4 RHINO FOORING PANKS 6, 7 SAFE OAD TABES 19 STAINESS STEE TREAD PATE 7 HANDRAIING CRIMP CONNECTORS 13 HANDRAI BASE PATES 13 HANDRAI BRACKETS 19 HANDRAI KNUCKES (TUBUAR) 13 HANDRAI STANDARDS 12 HANDRAI STANDARD FOOTPATES 13 RETURN BENDS 13 TUBE 15 TUBECAMPS 16, 17, 18 EDABE EBOS 13 STAIRTREADS ANTI-SIP TAPE 9 BAR GRATING STAIRTREAD 10 DURBAR STAIRTREAD 10 EEFANT GRATING STEP 11 EXPANDED META STAIRTREAD 10 FIRM GRIP STAIRTREAD 11 GASS FIBRE STAIRTREAD COVER 9 CC CAST IRON STAIRTREADS 10 NON SIP NOSING 9 MISCEANEOUS CRASH BARRIER 14 HANDRAI BRACKETS 19 PAET FEET 19 RED OXIDE PAINT 19 SECURITY POSTS 14 STEE DISCS 19 ZINC SPRAY 19 3
2 OPEN STEE FOORING STANDARD PANES - 6 metres x 1 metre * THE BEARER BARS RUN THE ENGTH OF THE PANE. * FOORING CAN ASO BE CUT TO SIZE AND SHAPED TO SUIT YOUR INDIVIDUA REQUIREMENTS. BAR ARRANGEMENTS PRODUCT GROUP 24 MOST POPUAR STOCKED SIZES 25mm x 3mm /100 PAIN FINISH mm x 5mm /100 PAIN FINISH mm x 3mm /100 PAIN FINISH mm x 3mm /100 PAIN FINISH mm x 3mm /100 GAVANISED mm x 5mm /100 GAVANISED mm x 3mm /100 GAVANISED FAST DEIVERY, HATEVER YOU REQUIRE! E CAN SUPPY MATCHING STAIR TREADS - SEE PAGE 10 BAR DIMENSIONS - STANDARD SIZES 20mm x 3mm 25mm x 3mm 30mm x 3mm 35mm x 3mm 40mm x 3mm 20mm x 5mm 25mm x 5mm 30mm x 5mm 35mm x 5mm 40mm x 5mm 50mm x 5mm 55mm x 5mm 60mm x 5mm ASO AVAIABE ITH SERRATED EDGE BEARER BARS FOR EXTRA GRIP SEE PAGE 19 FOR SAFE OAD TABES HO TO ORDER STANDARD PANES 1. Type of flooring. 2. Bar dimension. 3. Finish - plain, galvanised or bituminous. IF A SPECIA we also need 1. Size of panel. 2. Direction of load bearing bars 3. Are binding bars required on edges? 4. Drawings with written order FIXING CIPS - Galvanised For type (41mm between bars) Code No For type N (30mm between bars) Code No
3 DIAMOND PATTERN OPEN STEE FOORING BAR DEPTHS: 20mm - 50mm Supplied in panels made to order with maximum sizes determined by specification. EXPANDED META AKAY MESH Other patterns available in steel, aluminium and stainless steel. Can also be supplied sheared to size. FIXING CIPS Code No (RD-17A) Not for use with 2496 Use hook-bolts For use with Ref Code No For use with Ref consisting of Hook, Bolt and Clamp. Plain - Code No Galvanised - Code No Ref Type Material Nom size Nom size Nom Approx Standard Sheared standard No of aperture of stands overall weight mm mm mm mm thickness uncoated note below note below x S width thick mm kg/m 2 x S x S 4896 Plain Steel 79.4 x x x Plain Steel 44.5 x x 1220 GRATINGS PRODUCT GROUP 42 MESH SIZE Panel Material: Galvanised or Plain Steel Mesh: 30x30mm or 15x30mm Industrial gratings combine great strength with a light structure giving good non-slip properties. Ideal for use on platforms, galleries, gangways, storage floors etc. Elefant Industrial gratings stock items only have an edge bar on two sides parallel to the first dimension shown in the table = can be delivered in self colour The grating can be manufactured to the customers applications FIXING CIPS TOP FIXING CIPS CODE: CAMP FITTING CODE:
4 RHINO ANTI-SIP FOORING 2mm THICK PRE-GAVANISED IN ENGTHS OF APPROX 4 METRES x 50mm DEEP PRODUCT GROUP 34 RHINOPIC Holes Ø 5mm burst embossed upwards Non slip surface Setting in inclined side % Open area: 2.0 idth Code No. 240mm mm RHINOMIXTE Holes Ø 5mm burst embossed upwards Holes Ø 16mm embossed downwards Non slip surface Draining surface % Open area: 21.0 idth Code No. 180mm mm mm mm RHINODIAM Diamond points embossed in a diagonal line Universal use for all requirements idth Code No. 180mm mm mm mm RHINODON Holes Ø 16mm embossed downwards Recommended for warehouse and shelving % Open area: 19.0 idth Code No. 240mm mm mm RHINOPUS Split and embossed surface with serrated finish Very strong and non slip Recommended for high risk slippery areas % Open area: 47.0 idth Code No. 180mm mm mm mm FOOR STRAPS FOR END FIXING : 6 180mm - Code mm - Code mm - Code mm - Code
5 STAINESS STEE FIRMGRIP PANKS - TYPE 95 IN 2mm THICK idth Depth ength Code No. 150mm x 32mm 3000mm SS 200mm x 45mm 3000mm SS 225mm x 45mm 3000mm SS 250mm x 45mm 3000mm SS 275mm x 45mm 3000mm SS AUMINIUM FIRMGRIP PANKS TYPE 1409 IN 3mm THICK idth Depth ength Code No. 100mm x 45mm 6000mm A 150mm x 45mm 6000mm A 200mm x 45mm 6000mm A PRODUCT GROUP 42 DURBAR PATTERN STEE FOOR PATES Thickness Kilos on plain x x x per sq mm metre PRODUCT GROUP 3501 AUMINIUM AOY TREADPATE FIVE BAR PATTERN Grade 5754 H114 Tread Height 1.5mm ength x idth Thickness Code No. 2500mm x 1250mm mm x 1250mm mm x 1250mm AUMINIUM AOY TREADPATE TO BAR PATTERN Grade 5754 H114 Tread Height 0.5mm ength x idth Thickness Code No. 2000mm x 1220mm PRODUCT GROUP 3505 AUMINIUM AOY TREADPATE ONE BAR PATTERN Grade 5754 H114 Tread Height 1.5mm ength x idth Thickness Code No. 3000mm x 1250mm mm x 1250mm PRODUCT GROUP 3505 STAINESS STEE TREADPATE ONE BAR PATTERN Grade 304 Tread Height 1.5mm ength x idth Thickness Code No. 3000mm x 1000mm mm x 1250mm PRODUCT GROUP 3504
6 GASS FIBRE GRATINGS PRODUCT GROUP 33 CODE MOUDED GRATING 38mm DEEP MESH SIZE - 38 x 38mm STANDARD PANE: 1220 x 3660mm COOUR - GREY (OTHER COOURS TO ORDER) INTEGRA QUARTZ GRIT TOP * TOP QUAITY * CORROSION RESISTANT * SIP RESISTANT * FIRE RETARDENT * HIGH EIGHT TO STRENGTH RATIO * EASY TO USE * ONG SERVICE IFE A PATTERNS CAN BE SUPPIED CUT TO SIZE CODE MOUDED GRATING 25mm DEEP MESH SIZE - 25 x 100mm STANDARD PANE: 1220 x 3660mm COOUR - GREY (OTHER COOURS TO ORDER) INTEGRA QUARTZ GRIT TOP COMPETITIVEY PRICED ITH NON-FERROUS ATERNATIVES CODE MOTRUDED GRATING - RIGIDEX 11-38mm DEEP MESH SIZE - 25 x 100mm STANDARD PANE: 1220 x 3660mm COOUR - YEO INTEGRA QUARTZ GRIT TOP HODING DON CIPS - stainless steel CODE: for 38 x 38mm mesh CODE: for rectangular mesh 25mm wide CODE: for rectangular mesh 38mm wide CODE MOTRUDED GRATING - RIGIDEX 1-38mm DEEP MESH SIZE - 38 x 100mm STANDARD PANE: 1220 x 3660mm COOUR - GREY INTEGRA QUARTZ GRIT TOP E CAN ASO SUPPY TO ORDER: PUTRUDED INDUSTRIA AND PEDESTRIAN GRATINGS STRUCTURA SHAPES - RODS, TUBES, BEAMS, ANGES, CHANNES & PATES SAFETY ADDERS AND HANDRAIING COMPONENTS CHEMPATE GRP FOOR PATE PRODUCT GROUP 33 AN ECONOMICA, SAFE SOUTION TO SIPPERY AKING SURFACES. EASIY CUT AND FITTED BY BOTING OR SCREING DON. EASY TO CEAN. EXCEENT DURABIITY. CAN BE FITTED OVER ANY SOID SURFACE HERE SIPS OR FAS ARE A POTENTIA HAZARD. STANDARD COOUR: GREY SHEET SIZE: 1219 x 2438mm THICKNESS EIGHT PER SHEET CODE: mm 18.1 KGS CODE: mm 21.8 KGS CODE: mm 35.8 KGS 8
WELAND TERMINOLOGY LOAD BEARING BAR CROSS BAR GRATING TYPE SAF MESH OPENING GRATING. LENGTH, SPAN WIDTH or LENGTH OF LOAD BAR GRATING
GRATING Page Terminology 6-7 Pedestrian Walkway Multipanels from Stock 8-13 Duckboard 13 Vehicular Multipanels with Load Tables 14-15 Kerb Angle Frames 16-17 Entrance Mats 18-20 Special Grating 22 Mesh
More informationSafety Grating GSSG-13R GRIP STRUT. safety grating
Safety Grating GSSG-13R safety grating Table of Contents & Advantages Advantages.................................................... 2 Proof Of Performance...................................... 3 General
More informationHANDRAIL STANDARDS HANDRAILS AXESS LADDER SYSTEM KICK FLAT SYSTEM OPEN FLOORING
ENGINEERING LTD. HANDRAIL STANDARDS HANDRAILS AXESS LADDER SYSTEM KICK FLAT SYSTEM OPEN FLOORING Member of PF Group Guardrail Engineering Limited Manders Industrial Estate Old Heath Road Wolverhampton
More informationSTOCK LIST & BUYER S GUIDE
STOCK LIST & BUYER S GUIDE common Decimal equivalents 1/64 =.0156 1/32 =.0312 1/16 =.0625 3/32 =.0937 1/8 =.125 3/16 =.1875 7/32 =.2187 1/4 =.250 9/32 =.2812 5/16 =.3125 3/8 =.375 7/16 =.4375 1/2 =.500
More informationBuyers Guide: Information required:
Buyers Guide: Information required: When ordering, please state: 1 Reference Number of Mesh (include any alphabetical suffix) Conventional/Flattened Mesh Dimensions: 1. For conventional (raised) meshes
More informationAnodes and Misc Equipment
Anodes and Misc Equipment Application: Platinised Titanium Anodes Platinised titanium anodes are recommended for use in the following electrolytic processes:- Precious metal electroplating - e.g. Au, Pt,
More informationMechanical arms, belts and sheets
Car parks Mechanical arms, belts and sheets DETAIL ARM CAR PARK (mm) 5000 Platen 100x5mm Iron sheets 4mm 5000 485 2100 Belts type C 120x50x2 mm 4915 5400 Hot dipped galvanized UNE-EN ISO 1461 or black
More informationFabcograte FRP Grating. Tolerances: ±1/16. Tolerances: ±1/16. THICKNESS BAR SPACING PANEL SIZE (FT.) WT (LBS) 1" 1.5" x 1.
Features: Will not rust. Corrosion resistant. Non-sparking. Fire retardant. Non-conductive. Maintenance free. Molded-in color. Light weight. Easy to install. Impact resistant. Quality appearance. Fabcograte
More informationFRP Grating, Handrail, Guidelines for Ladders & the Engineer Structural and Designer Shapes
Guidelines for the Engineer and Designer FRP Grating, Handrail, Ladders & Structural Shapes Corrosion Resistant Fire Retardant Low Maintenance Long Service Life High Performance Composite Solutions 1.0
More informationTimber Decks. Technical Note. March 2007
Timber Decks Technical Note. March 2007 This Technical Note contains general information for residential timber decks and floor frame structures for veranda s, patios etc which are exposed to the weather.
More informationCONTENTS. Page KERBS ETHEKWINI PRODUCTS ETHEKWINI PRODUCTS WATER CHANNELS WATER CHANNELS / GRILL BLOCKS / CHANNEL DRAIN COVERS
CONTENTS KERBS ETHEKWINI PRODUCTS ETHEKWINI PRODUCTS WATER CHANNELS WATER CHANNELS / GRILL BLOCKS / CHANNEL DRAIN COVERS STADIUM SEATING / ETHEKWINI & TELKOM SPEC PRODUCTS PRECAST PANELS DURBAN BEACHFRONT
More informationRoll Up Banners. Display Banners. Pop-Up Counter. Display Wall. Flags. Free Hanging Banners
Roll Up Banners Display Banners Pop-Up Counter Display Wall Flags Free Hanging Banners Roll Up Banner: Roll Up Regular A robust and professional looking free standing retractable display. The unit comes
More informationHeavy Duty Fibreglass Floor Grating
Heavy Duty Fibreglass Floor Grating Anti-slip Fibreglass Grating DURA TREAD Gritted Anti-Slip Surface Prevents Slips, Trips & Falls in the Workplace INDUSTRIAL High performance composites DURA TREAD Range
More informationThere is no upside to. down time
EXPANDED and PERFORATED Data and Specifications 30 Similar to Type 302 with excellent mechanical properties, resistance to many corrosive agents. Useful where sanitation and cleanliness are important.
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationCONTENTS 1. INTRODUCTION...1 2. METHODOLOGY...2 3. RESULTS & FINDINGS...9 APPENDIX
Load Testing of Balustrade Systems Test Report No. S365 CONTENTS 1. INTRODUCTION...1 2. METHODOLOGY...2 2.1 BALUSTRADE LOAD ASSESSMENTS... 2 2.2 TEST SYSTEMS... 3 2.3 TEST PROCEDURE... 8 3. RESULTS & FINDINGS...9
More informationFixed Vertical Access Ladders
Fixed Vertical Access Ladders Index 1. Fixed Vertical Access Ladders 2. Aluminium Fixed Vertical Access Ladders: Standard Specification 3. Aluminium Fixed Vertical Access Ladders: Technical Drawing 4.
More informationStainless Steel and Mild Steel Enclosures. Stainless Steel and Mild Steel Enclosures
SX 8 The SX range comprises 14 sizes of enclosure manufactured in either stainless steel or mild steel. 11 sizes are available in depths of 140 or 200mm and 8 sizes are available in depths of 140, 200
More informationResidential Deck Safety, Construction, and Repair
Juneau Permit Center, 4 th Floor Marine View Center, (907)586-0770 This handout is designed to help you build your deck to comply with the 2006 International Residential Building code as modified by the
More informationPreface nivtec.com 3
nivtec.com Preface nivtec.com 3 nivtec 4 nivtec.com Planning with an Eye for Details nivtec.com 5 prolight+sound 2012 6 nivtec.com Meeting Point Fair Booth nivtec.com 7 Our Preparations 8 nivtec.com Enable
More informationShelf Support Systems
Shelf Support Systems Cabinet Hardare - Shelving and Bookcase Strip Cabinet Hardare Shelf Support Systems Four different styles of bookcase strip and five shelf support stud designs combine to create an
More informationFormwork Direct International Ltd Phone No +44 (0151) 532 0179 Fax no +44 (0151) 523 8330 E-Mail: sales@formworkdirect.co.
Tie Rod & Formwork s well as containing our comprehensive range of Formwork Tie Sytems; this section also covers our market leading Rapidobat Column Former. Exclusive also to Formwork Direct are innovations
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationJANUARY 1, 2015 AVAILABILITY LIST
JANUARY 1, 2015 AVAILABILITY LIST EXTREN Structural Shapes and Plate...2 Special Composite Shapes...4 DURADEK and DURAGRID Pultruded Grating...6 DURAGRATE Molded Grating...8 DURATREAD TM Molded Stair Tread
More informationQuarry & Recycling Products
Quarry & Recycling Products CONTENTS Woven mesh screens Perforated screen plates Rubber & Polyurethane screens Walkways & Steps Ordering Information Further Information PAGE 3 6 8 9 10 11 Graepel has a
More informationFIBREGLASS LADDERS THE LADDER WITH THE BLUE TRIM
SUPERLITE STEP-LADDER WITH ALUMINIUM TREADS 1 700 700-06 SOLID TRIANGULAR BOTTOM GUSSET PINCH RESISTANT SPREADER BARS Ref. Bar Code No. of steps Weight 700-06 6005413007015 6 8.3kg 700-08 6005413007022
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationCable Trays Technical Instructions & Specifications
Cable Trays Technical Instructions & Specifications Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased
More informationTECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE
TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE TECHNICAL SPECIFICATION PART 8000 - PRECAST CONCRETE TABLE OF CONTENTS Item Number Page 8100 PRECAST CONCRETE CONSTRUCTION - GENERAL 8-3 8101 General
More informationlindab duct suspension & support system Duct suspensions & Support systems
lindab duct suspension & support Duct suspensions & Support s lindab duct suspension & support Content Duct suspensions & Support s Duct suspension Duct suspension FB... DRSN... 0 DRSNR... 0 Channels and
More informationDetailing of Reinforcment in Concrete Structures
Chapter 8 Detailing of Reinforcment in Concrete Structures 8.1 Scope Provisions of Sec. 8.1 and 8.2 of Chapter 8 shall apply for detailing of reinforcement in reinforced concrete members, in general. For
More informationCATALOGUE. Telescopic slides. Linear ball rails. The linear motion solution
106 Telescopic slides CATAOGUE inear ball rails The linear motion solution Chambrelan: The linear motion solution Chambrelan is a market leader with over 50 years manufacturing experience in the global
More informationLightweight, Heavy Duty
Lightweight, Heavy Duty Trench Covers System Reliability The light weight combined with the tremendous strength of Comcore Trench Covers translates into speed, productivity and increased system reliability.
More informationMANUFACTURERS OF SITE ENCLOSURES STEEL HOARDINGS & FENCING
MANUFACTURERS OF SITE ENCLOSURES STEEL HOARDINGS & FENCING Formed in 1988 as a steel stockholding business and operating out of Wednesbury in the heart of the West Midlands; Hawthorn Trading has a long
More informationHORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
More informationALUMINIUM LADDERS. A load capacity of up to 100kg. A load capacity of up to 115kg. Page 12 Page 13 Page 14. Page 11
A load capacity of up to 100kg Page 11 Page 12 Page 13 Page 14 A load capacity of up to 115kg Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 8 A load capacity of up to 115kg Page 21 Page 22 Page 23 Page
More informationCAST IRON THE BASICS. Heatline - Cast Iron Radiators SMOOTH FLAT FILE TO REMOVE ANY SWARF. ONE TIME. ASSEMBLY. JOINTS SHOULD BE TIGHTENED.
CAST IRON THE BASICS 1. DO NOT LIFT ON YOUR OWN. 2. ONLY LIFT THE RADIATOR VERTICALLY. 3. DO NOT LIFT MORE THAN 8/10 SECTIONS AT ANY ONE TIME. 4. POSITION THE RADIATOR BEFORE FINAL ASSEMBLY. 5. THIS PRODUCT
More informationTECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR
TECHNICAL SPECIFICATION FOR HIGH TENSION LINE HARDWARE AND ACCESSORIES FOR ACSR PANTHER & WOLF CONDUCTOR 1.1.0 SCOPE : This specification covers design, manufacture, testing at manufacture s works before
More informationCABLE TRENCH INSTALLATION GUIDE
1.0 INDEX 1.0 INDEX 2.0 PURPOSE 3.0 GENERAL INFORMATION 4.0 PLANNING INFORMATION 5.0 CREW INFORMATION 6.0 CONTRACTOR INFORMATION 7.0 PRECASTED/ POURED-IN-PLACE TRENCH DRAWINGS 2.0 PURPOSE This standard
More informationITS specification Jointing chambers and pull pits (ITS-02-02)
ITS specification Jointing chambers and pull pits (ITS-02-02) NZ Transport Agency Effective from September 2011 Copyright information This publication is copyright NZ Transport Agency (NZTA). Material
More information!!!!!! !!! Decra Plus DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 DPSW016 DPSW020 DPSW021 DPSW024 DPSW030 DPSW031 DPSW035 DPSW030 DPSW031 DPSW035
Decra Plus Drawing no DPSW010 DPSTW011 DPSW012 DPSW013 DPSW014 DPSW015 Description Shown In Decra Brochure Most Commonly Used Detail t~êã=oççñ=b~îéë=aéí~áä=b~îéë=lîéêü~åö=táíü=fåëìä~íéç=c~ëåá~=~åç=pçññáí
More informationACTIV-8 PLUS Insulated Conductor Bar
ACTIV-8 PLUS Insulated Conductor Bar A product made in Australia www.conductix.com.au ACTIV-8 PLUS ACTIV-8 is the most widely used and stocked conductor rail in use in Australia. It was designed by Conductix
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12 14tel: 061307-3801. E-mail:pzoli@kiralytrading.hu agi@kiralytrading.hu. Hinges
355 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e. when
More informationmechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles
Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles
More informationReticulation sewers in basements Technical guidelines
Reticulation sewers in basements Technical guidelines Overview What These guidelines explain our technical requirements for laying sewers in building basements. The scope of the guide is restricted to
More informationEberl Iron Works, Inc.
Eberl Iron Works, Inc. Order Form Manual for Stair Pans, Stair Treads and Bent Plate NEW: VISIT US ONLINE AT WWW.STAIRPANS.COM Eberl Iron Works, Inc. 128 Sycamore St. Buffalo, NY 14204 Ph: 716-854-7633,
More informationMethod of Build KOMFORT. Polar 100
Poar 100 - a seamess (tape and fiied or skimmed) soid partition and frameess gazed dry or siicon jointed system Poar 100 Method of Buid Love the space you re in. March 2013 Poar-100 - partitioning system
More informationRADAR. 227 www.ncdirect.co.uk
RADAR solutions RADAR RADAR Key System 228 RADAR Lockset 229 RADAR Cover Plate 229 RADAR Padlock 230 RADAR Automatic Toilet Entry System 231 RADAR Ramp 231 RADAR Ramp Sign 231 227 www.ncdirect.co.uk RADAR
More informationCATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI
CATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI The Company Founded in 1973 by Mr Imes Tinti in association with his son Vanni Tinti. In 1999 the locksmith workshop became a modern industrial company
More informationEuropean Technical Assessment ETA-10/0153 of 10/06/2015
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet ww.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011 of
More informationTHE IDEAL SOLUTION SHELVING. Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk
THE IDEAL SOLUTION Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk EZ STORE Bright Chrome Wire System g Bright Chrome wire shelves Heights 3 tier = 1650mm standard
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More information1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE
1..1 1.1.8 PRODUCTBLADEN SHEETS GT page 1 to 6 Rockpanel Structure is a very durable panel with a lightly textured finish, specially developed for use in cladding, fascia, soffit applications. The basic
More informationBlindklinknagel catalogus Blind Rivet Catalogue
Bindkinknage cataogus Bind Rivet Cataogue In spite of the constant care and attention to ensure the accuracy of the information on this cataogue, Masterfix assumes no responsibiity therefore. A content
More informationPerfect functionality whatever the function.
match up For over 130 years, Sedus has been synonymous with innovative office furniture which not ony supports work at and around the desk, but aso makes it more productive. Take, for exampe, Sedus match
More informationUNIVERSAL RAILING, STEEL
RAILINGS Page Universal Railing, steel 108-109 Large Module Railing, steel 110-111 Allround Railing, aluminium 112-113 Module Railing, aluminium 114-115 Standard Type Railing, aluminium 116-117 107 UNIVERSAL
More informationFixed Access Ladders. Table of Contents. 1. Legislative Requirements
Fixed Access Ladders Engineering Data Sheet 2-04 Revised: January 1997 Table of Contents 1. Legislative Requirements 2. General 3. Rungs 4. Side Rails 5. Safety Cages 6. Attachment & Anchoring 7. Platforms
More informationSECTION 15140 - PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationCERTIFICATE OF APPROVAL No CF 291 SCHOTT UK LIMITED
CERTIFICATE OF APPROVAL No CF 291 This is to certify that, in accordance with TS General Requirements for Certification of Fire Protection Products The undermentioned products of Drummond Road, Stafford.
More informationLinkeo 19" freestanding cabinets
87045 LIMOGES Cedex France Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Linkeo 19" freestanding cabinets Page 1. General characteristics....1 2. Range....2 3. Technical characteristics...3
More informationColonnade Security Pipe
Description: Round & Square downpipe formed from extruded 6060 T4 aluminium in various sizes (Ø83mm, Ø108mm, 83x83 mm & 108x108mm*) & supplied with a complete range of accessories i.e. Offsets, bends,
More informationSöll GlideLoc Aluminium Ladders. Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073
Söll GlideLoc Aluminium Ladders Vertical fall protection system Certified according to EN 353-1:2002 and CNB/P/11.073 7 Söll GlideLoc Aluminium ladders Y-spar Profile 52 x 51 mm With connector Mounting
More informationBAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -
BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt
More informationMicro Precision Tools Your partner for precision applications
Micro Precision Tools Your partner for precision applications 2K Softgrip Micro Screwdrivers (page 72-73) Working in restricted areas is a particular problem especially in modern equipments, such as electronic
More informationPRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE. By H P Gupta & D K Gupta
PRESENTATION ON REPAIR AND REHABILITATION OF BUILDINGS DAMAGED IN EARTHQUAKE By H P Gupta & D K Gupta DIFFERENT TYPES OF DAMAGES 1.Minor cracks 0.5 to 5 mm wide in load or non-load bearing walls 2.Major
More informationProduct Catalogue. Dammann - Supplier of Barriers
Product Catalogue Dammann - Supplier of Barriers Your expert partner for barriers Successful for more than a decade Experience, quality and reliability are attributes of Dammann Absperrung that our customers
More informationRoofing Sheet & Wall Cladding. Specialists
Roofing Sheet & Wall Cladding Copyright Rhino Steel Cladding Specialists Copyright Rhino Steel Cladding About Us Rhino Steel Cladding is a family run business based in the West Midlands specialising in
More informationInForm Mobile Units. Selection. Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley
Selection Equipment trolley, filing trolley Printer/PC trolley Overhead/demo trolley Basic mobile unit Basic mobile with vertical profiles Installation options Functional shelf, low Functional shelf, inclinable
More informationDESIGN OF SLABS. 3) Based on support or boundary condition: Simply supported, Cantilever slab,
DESIGN OF SLABS Dr. G. P. Chandradhara Professor of Civil Engineering S. J. College of Engineering Mysore 1. GENERAL A slab is a flat two dimensional planar structural element having thickness small compared
More informationMore than shelving & racking. All for your storage demands.
More than shelving & racking. All for your storage demands. CONTENTS SELECTIVE PALLET RACKING A cost effective storage system providing direct access to all pallet. SLOTTED ANGLE SHELVING Simple, cost-effective
More informationTable of Contents. IV. Interior Doors. 1. Product Training 2. Bilco Quote/Order Checklist
Table of Contents IV. Interior Doors 1. Product Training 2. Bilco Quote/Order Checklist Interior Doors (non-drainage units) 1. Bilco T, TD, K, and KD Type doors A. T - single leaf aluminum construction
More informationSECTION 4: Cable Ladder Stainless Steel & Aluminium
SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General
More informationSliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
More informationWaste Oil Handling, Spill Containment & Lighting
58 Waste Oil Handling, Spill Containment & Lighting 372000 SAMOA Mobile Waste Oil Drainer & Extractor Drains and/or extracts waste oil from cars and light commercial vehicles Drain bowl capacity of 20
More informationVOLUME AND SURFACE AREAS OF SOLIDS
VOLUME AND SURFACE AREAS OF SOLIDS Q.1. Find the total surface area and volume of a rectangular solid (cuboid) measuring 1 m by 50 cm by 0.5 m. 50 1 Ans. Length of cuboid l = 1 m, Breadth of cuboid, b
More informationAluminium systems profile selection
Aluminium systems profile selection The purpose of this document is to summarise the way that aluminium profile selection should be made, based on the strength requirements for each application. Curtain
More informationVCE VET ENGINEERING STUDIES
Victorian Certificate of Education 2013 SUPERVISOR TO ATTACH PROCESSING LABEL HERE STUDENT NUMBER Letter Figures Words VCE VET ENGINEERING STUDIES Written examination Section Wednesday 20 November 2013
More informationNew in the PFERD Product Line 204
COMBICLICK Fibre Discs COMBICLICK fibre discs Silicon carbide SiC D The silicon carbide SiC type is suitable for working on aluminium, copper, bronze, titanium, high-alloy steels and fibre reinforced plastics.
More informationACO Water Management: Civils + Infrastructure
ACO Water Management: Civils + Infrastructure Uniclass L3 + L735 CI/SfB (5.5) EPIC J343 ACO MultiDrain MD ACO MultiDrain MD channel drainage system Technical Data ACO MultiDrain MD Introduction to the
More informationBOQ SPECIFICATIONS. The Blind system consist of a coated aluminium tube of 38 mm diameter with provision of fabric clamping.
BOQ SPECIFICATIONS VERTICAL BLINDS Vertical Blinds made of glass fibre fabrics in width 5 (or 4 ). Minimum overlapping of ¾ in fabric. Top aluminium anodized rail of 1.4 mm thickness. 2 inch wide channel
More informationProduct # Overall Length Claw Blade Width Head Width Weight 55-099 18 in (457 mm) 1-1/2 in (38 mm) 6-1/2 in (165 mm) 4.51 lbs (2.
Stanley Hand tools stanley Fubar Forcible entry tools Forcible entry tool designed by responders for vehicle extrication and extreme demolition. 8-in-1 tool for prying, splitting, board bending and striking
More informationINCREASE OF DURABILITY AND LIFETIME OF EXISTING BRIDGES. PIARC TC 4.4 EXPERIENCE.
INCREASE OF DURABILITY AND LIFETIME OF EXISTING BRIDGES. PIARC TC 4.4 EXPERIENCE. M.Sc. Gediminas Viršilas Head of Bridge Division, Lithuanian Road Administration Working group 2 of PIARC Technical Committee
More informationIsover HVAC Application Handbook Installing fire protection insulation to metal ductwork
Isover HVAC Application Handbook Installing fire protection insulation to metal ductwork HVAC - Fire protection of metal ductwork Fire protection Thermal insulation Isover ULTIMATE TM Protect - Fire protection
More informationPERGOLAS AND CARPORTS
TECHNICAL DATA SHEET ISSUED BY TIMBER QUEENSLAND PERGOLAS AND CARPORTS RECOMMENDED PRACTICE // MARCH 2014 19 This data sheet contains Timber Queensland s recommendations for attached and detached timber
More informationACO Water Management: Civils + Infrastructure
ACO Water Management: Civils + Infrastructure Uniclass L3 + L735 CI/SfB (5.5) EPIC J343 ACO MultiDrain MD ACO MultiDrain MD Medium duty channel drainage system ACO MultiDrain MD Introduction to the ACO
More informationMobile Home Pre-Inspection Checklist
Mobile Home Pre-Inspection Checklist TWO (2) STEP INSPECTION PROCESS STEP ONE: CALL FOR THE FIRST INSPECTION WHEN THESE ITEMS ARE COMPLETE. 1. Septic tank installed and plumbing complete. (SEE PLUMBING
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationCardok Sàrl CP37 CH-1295 Tannay Switzerland Phone: 0041 22 77 66 051 info@cardok.com
CARDOK CARLIFT Fast access to underground garages Fast, Silent, Discreet, Design, High-Tech Installation to replace an access ramp on private property Dimensions: (Built to measure, all dimensions can
More informationCable ladder installation at S.C.M. Chemicals Limited s titanium dioxide Plant in Western Australia
Exel Composites Cable Support Systems offer engineers a structural product for solving many design and plant engineering problems, enabling long term reliable support of expensive and often critical cables.
More informationFUTURE SLAB. PENETRATIONS and. DEMOLITION of POST-TENSIONED FLOORS
FUTURE SLAB PENETRATIONS and DEMOLITION of POST-TENSIONED FLOORS 1.0 INTRODUCTION Post-tensioned floor slabs in Australia and South East Asia are now universally regarded as the most cost effective form
More informationCHAPTER 29 VOLUMES AND SURFACE AREAS OF COMMON SOLIDS
CHAPTER 9 VOLUMES AND SURFACE AREAS OF COMMON EXERCISE 14 Page 9 SOLIDS 1. Change a volume of 1 00 000 cm to cubic metres. 1m = 10 cm or 1cm = 10 6m 6 Hence, 1 00 000 cm = 1 00 000 10 6m = 1. m. Change
More informationGUIDELINES FOR INSTALLATION OF AIR CONDITIONING UNITS 174-180 PHILLIP STREET, SYDNEY
GUIDELINES FOR INSTALLATION OF AIR CONDITIONING UNITS 174-180 PHILLIP STREET, SYDNEY July 2008 1.0 SCOPE These guidelines describe the way in which air conditioning units shall be installed or replaced
More informationBEDFORD DORMOBILE PARTS LIST JUNE 2016
BEDFORD DORMOBILE PARTS LIST JUNE 2016 FOR UK AND EU REGION REPRODUCTION PARTS FOR YOUR ORIGINAL DORMOBILE BEDFORD CA AND CF CONVERSIONS DORMOBILE LIFTING ROOF PARTS BEDFORD CA & CF Roof vent cover (colour
More informationWalking and Working Surface Checklist:
Walking and Working Surfaces Purpose: This information is presented to improve the level of safety in our operations, and to inform you that we will comply with the OSHA Standard 29 CFR 1910.23. Responsibility:
More informationGK Packing System Welding Instructions
GK Packing System Welding Instructions Roxtec GmbH Neuer Höltigbaum 1-3, 22143 Hamburg GERMANY Tel +49 (040) 657398-0, Fax +49 (040) 657398-50 EMAIL info@de.roxtec.com, www.roxtec.de Welding instructions
More information30 minutes in class, 2 hours to make the first time
Asking questions and defining problems Developing and using models Planning and carrying out investigations 30 minutes in class, 2 hours to make the first time 3 12 x 24 x ¾ inch plywood boards 1 x 12
More informationProduct Innovations 2014/2. A Company of the SWAROVSKI Group www.tyrolit.com
Product Innovations 2014/2 A Company of the SWAROVSKI Group www.tyrolit.com Contents 2 Contents PREMIUM Cerabond System 4 PREMIUM Longlife für Steel 6 premium Deep Cut Protection 7 From a good idea to
More informationBasic Principles & Common Practices
DETAILING STAIRS: Basic Principles & Common Practices Figure 1: Stair Terminology By Andrew J. Bellerby This article is designed to provide an introduction to detailing stairs. It explains the basic principles
More informationCOMMONLY USED RESIDENTIAL BUILDING CODES
COMMONLY USED RESIDENTIAL BUILDING CODES INTERNATIONAL RESIDENTIAL CODE (2009) form revised 5/10 FOUNDATION 1. DESIGN OF FORMWORK. Section 1906.1 IBC 2009, Section R404.1.2.3.6 IRC 2009, ACI 318 Section
More informationChapter 6 ROOF-CEILING SYSTEMS
Chapter 6 ROOF-CEILING SYSTEMS Woodframe roof-ceiling systems are the focus of this chapter. Cold-formed steel framing for a roof-ceiling system also is permitted by the IRC but will not be discussed;
More information