Buyers Guide: Information required:

Transcription

1 Buyers Guide: Information required: When ordering, please state: 1 Reference Number of Mesh (include any alphabetical suffix) Conventional/Flattened Mesh Dimensions: 1. For conventional (raised) meshes with angled strands inclined from the plane of the sheet. Dimensions from centre to centre of knuckles are shown. Width Thickness 2 Material e.g. Steel 3 Quantity of Sheets and/or Length of Coil 4 or Coil Width (LW dimension first). The diagrams below illustrate this point 5 Raised or Flattened Mesh Knuckle Nominal Short Way of Mesh SW Knuckle 6 Additional Processing or Special Finishes? (Galvanised, Anodised, Powder Coated, Plastic Coated) Sheet Measurements: Long Way of Mesh Pitch LW 2. For flattened meshes, which have been pressure rolled, resulting in strands which are in the same plane as the sheet. Dimensions of the aperture point to point are shown. Width Thickness Long Way e.g The sheet above is: 2440 LW x 1220 SW LWM: Long Way of Mesh Dimension Short Way e.g Aperture Dimension SW Short Way e.g The sheet above is: 1220 LW x 2440 SW SWM: Short Way of Mesh Dimension Long Way e.g LWM denotes longest part of diamond SWM denotes shortest part of diamond All standard sheet sizes are nominal (normally oversize). Mild Steel Edging Sections are on page 15. A S F AF SF AG Aluminium Stainless Steel Flattened Aluminium Flattened Stainless Steel Flattened Anodised Gold Aperture dimension LW Glossary of Mesh References: Glossary of Table Suffixes: Key to materials: LWA Long Way Aperture (Length of the Diamond for Flattened Mesh only) SWA Short Way Aperture (Height of the Diamond for Flattened Mesh only) LWD Long Way of the Diamond (measured from point to point horizontally) SWD Short Way of the Diamond (measured from point to point vertically) Swdt Strand Width (Width of Material Feed) Kgm 2 Kilograms per metre squared of Sheet which is open LWM Longest part of diamond SWM Shortest part of diamond Expanded Aluminium Mesh Expanded Stainless Steel Mesh Spec 304/S15 Expanded Stainless Steel Mesh Spec 316/S31 Pre-Galvanised Steel Head Sales Office: PO Box 14, Longhill Industrial Estate (North), Hartlepool TS25 1PR, England. Tel: +44 (0) Fax: +44 (1429) sales@expamet.co.uk Web: For further information on other Expamet Company Products: Illustrations in this brochure are indicative of and Pattern. FENCING/SECURITY PRODUCTS Tel: +44 (0) Fencing Security Cages TIMLOC EXPAMET BUILDING PRODUCTS Tel: +44 (0) Cavity Trays Ventilation Systems DPC Systems Loft Access Doors EXPAMET BUILDING PRODUCTS Tel: +44 (0) Metal Beads Laths Wall Starters Arch Formers Straps Joist Hangers Steel Lintels Metpost Steel Stud IRISH EXPAMET SALES OFFICE Westlink Industrial Estate, Kylemore Road, Ballyfermot, Dublin D.10. Tel: Fax: The company policy is one of continuous development, we therefore reserve the right to alter specifications, etc. without notice. Stock material may be collected from company depots for cash or by prior arrangement. Customers are advised to check availability of material. An Expamet International company Copyright The Expanded Metal Company Limited FM01344

2

3 Conventional Mesh Expanded Aluminium Mesh Expanded Stainless Steel Mesh Spec. 304/S15 Expanded Stainless Steel Mesh Spec. 316/S31 Centre - Centre Strand 941MM /Lm 212 x Coil 957MM /Lm 313 x Coil 926S x S x 10mtrs 901A x 10mtrs 707S x x A x A x S x S x 1250 Page 2

4 Edging Expanded Metal Size Thick Gap Standard Length Kg/m MILD STEEL EDGING SECTIONS Suitable for framing flattened Expamet up to and including 1.58 UF OD split tube UF UF UF UF Suitable for framing flattened Expamet up to and including 3.18 UF UF UF Suitable for framing conventional type Expamet expanded steel with strand widths of 2.39 or under. UF Mild Steel L Edging Sections LF1 13 Ref. LF1 section for framing angled strand type expanded steel having strand widths of 4.75 or under. Standard length LF2 7 kg/m kg/m Ref. LF2 section for framing angled strand type expanded steel having strand widths of 2.40 or under and also flattened expanded steel. Standard length UF Suitable for framing conventional type Expamet expanded steel with strand widths of 4.75 or under. UF UF UF UF UF Suitable for framing conventional type Expamet expanded steel with strand widths of 6.09 or under. Can be used for framing expanded steel walkway grating ref For full details see leaflet IP5. Edging Sections You can use Expamet edging section to transform standard sheets of mesh into a variety of functional products, adding value and enhancing appearance and appeal. Expamet edging section seals the edges of the mesh sheet giving a barrier for fixing, protecting or handling the finished sheets. Frames are frequently used on stairtreads and window guards. If you require advice on which edging section to use for your specific application, please contact our sales team Benefits Edging section is an economical way to make a mesh sheet into a functional panel. Fabrication is easy to perform and not time consuming, giving cost savings via our economically developed method. Features We offer a choice of 19 types of Edging Section in Mild Steel, which have been specifically developed for framing Expanded Metal Meshes. Edging Section can be used on both flattened and conventional / raised mesh.we offer a standard stock lengths, as well as a made to order capability, so non standard lengths are not a problem. UF Suitable for framing 10g and 12g diameter welded mesh and expanded metal with strand widths up to 3.2 UF UF Page 15

5 Walkway Mesh Expanded Aluminium Mesh Internal Aperture LWA SWA Strand x A x 1250 Centre - Centre x 1220 Centre - Centre x 1220 Centre - Centre x 2440 Centre - Centre x 1830 Centre - Centre N x 1525 Page 14

6 Conventional Mesh Expanded Aluminium Mesh Expanded Stainless Steel Mesh Spec. 304/S15 AG indicates anodised gold Centre - Centre Strand x A x AG x x x S x S x x A x S x x A x x A x 1250 Page 3

7 Conventional Mesh Expanded Aluminium Mesh Expanded Stainless Steel Mesh Spec. 304/S15 Centre - Centre Strand x S x x S x x A x x x A x x A x x S x 1250 Page 4

8 Shaped Mesh Pre-Galvanised Steel Centre - Centre Strand MINARET MINAR x 1220 Not actual size PARALLEL STRAND x x 1250 Centre - Centre LWA SWA Strand SQUARE 1601F x 1250 Page 13

9 Shaped Mesh Expanded Aluminium Mesh Expanded Stainless Steel Mesh Spec. 316/S31 Pre-Galvanised Steel Expanded Stainless Steel Mesh Spec. 304/S15 Internal Aperture LWA SWA Strand EXPERF 1302F x 1250 N6912F x 2500 N7486F x 2500 N7482F x 2500 N7484F x 2500 N6664F x 2500 N6659F x 2500 N7700F x 2500 N7699F x 2500 Centre - Centre Strand HEXAGON HEX x 1250 HEX x 1250 Page 12

10 Conventional Mesh Expanded Aluminium Mesh Centre - Centre Strand x x x x x A x 1250 Page 5

11 Conventional Mesh Centre - Centre Strand x x x 1220 Page 6

12 Flattened Mesh Internal Aperture LWA SWA Strand 3393F x F x F x 1220 Page 11

13 Flattened Mesh Expanded Aluminium Mesh Internal Aperture LWA SWA Strand 2076F x F x AF x F x 1220 { x F x 2440 { x AF x 2500 N7622F x F x 2440 Page 10

14 Conventional Mesh Centre - Centre Strand x x x 1220 Page 7

15 Flattened Mesh Expanded Aluminium Mesh Expanded Stainless Steel Mesh Spec. 304/S15 Internal Aperture LWA SWA Strand 706F x F x SF x F x AF x F x AF x SF x SF x SF x 1250 Page 8

16 Flattened Mesh Expanded Aluminium Mesh Expanded Stainless Steel Mesh Spec. 304/S15 Pre-Galvanised Steel Internal Aperture LWA SWA Strand 1280F x AF x F x 1220 N0921F x F x F x F x F x AF x 1250 Page 9