Firestone Modified Bitumen Roofing Systems DURABLE. RELIABLE. SUSTAINABLE

Firestone Modified Bitumen Roofing Systems DURABLE. RELIABLE. SUSTAINABLE

I n t r o d u c t i o n t o M o d i Acres of Roofing. Decades of Performance. Over the past 20 years, Firestone Building Products has manufactured and installed hundreds of versatile, economical, high-quality Modified Bitumen Roofing Systems. These time-tested roofs are durable, reliable and deliver exceptional performance in even the most extreme climates and applications. Our newest modified bitumen product, UltraWhite, features a highly-reflective white granule surface for maximum reflectivity. Firestone Modified Bitumen Roofing Systems Firestone is committed to advancing roofing technology, and has invested millions into innovating new roofing solutions. Our state-of-the-art technical center in Fishers, IN is the operations center for the chemists, engineers and technicians who develop and test the latest roofing advancements, including SBS (styrene-butadiene-styrene) Modified Bitumen and APP (atactic polypropylene) products. Firestone Bitumen Roofing Systems use new technology to significantly strengthen and extend traditional asphalt roofing, resulting in stronger, better performing roofs. Firestone Bitumen Roofing Systems feature a granule surface that provides higher resistance to wear for a longer lasting, water-resistant roof. Firestone Modified Bitumen Roofing Systems are available in a variety of installation methods to best suit your application, including heat welding, hot asphalt and cold-applied adhesive. Superior compound formulation Setting us apart from conventional asphalt technology, Firestone has developed a proprietary blend of SBS polymers combined with select grades of refined asphalt for a durable, flexible and exceptionally strong product. Its elongation properties and cold temperature flexibility allow Firestone Bitumen Roofing Systems to resist thermal and structural movement with flexibility even in temperatures below 0 F.

f i e d B i t u m e n R o o f i n g Innovative reinforcement technology At the core of Firestone Bitumen Roofing Systems is a high-quality single reinforcing fabric that embeds glass in a non-woven polyester mat. This fabric provides superior resistance to punctures, while the add dimensional stability and tear strength. Firestone s SBS and APP Cap Sheets are made with a glass reinforced polyester non woven mat, used in a variety of SBS & APP Membrane systems including: SBS flashing for traditional BUR systems SBS cap sheets and flashing for hybrid BUR systems SBS base sheets, cap sheets and flashings for 2-ply modified bitumen systems One fabric, one process An extensive line of modified bitumen products with proprietary blends of SBS rubber and asphalt allows designers to select the right combination of base and cap plies, achieving the optimal strength and flexibility for each roof. Non-woven polyester provides flexibility and puncture resistance. Firestone glass-reinforced polyester resists low displacement strain from thermal stress and internal tension. Continuous glass fibers provide strength and stability Firestone glass-reinforced polyester accomodates high displacement strain from structural movement and point loading. Our glass-reinforced polyester is not a laminated or dual-carrier mat it s a true single fabric produced in one integrated manufacturing process. And it can be applied with any method, whether heat fusion, hot asphalt or a cold-applied adhesive.

M o d i f i e d B i t u m e n UltraWhite Modified Bitumen Cap sheet This one-step solution is the ideal way to get the advantages of reflective cool roofing in a modified bitumen system without the need for liquid coatings after the roof has been installed. Firestone UltraWhite granules are applied to modified bitumen cap sheets during the manufacturing process to create a highly reflective surface for enhanced energy efficiency. Benefits include: Factory-applied, permanent granule surface Available in SBS and APP Reflectivity consistent with the Cool Roof Rating Council (CRRC) programs Helps reduce heat island effects Outstanding abrasion and puncture resistance Can be applied with heat welding, hot asphalt or cold adhesive Cleaner application without the use of coatings 20-year Red Shield Warranty available 25-year Red Shield Warranty or 30 year Platinum Warranty available TEAM, ONE PLANET ONE TEAM, ONE PLANET Red Shield Warranty Protection

R o o f i n g M e m b r a n e Firestone UltraWhite Modified Bitumen Product Options Styrene Butadiene Styrene (SBS) SBS Cap* SBS Glass SBS FR Cap* SBS Glass FR SBS Torch SBS Glass FR Torch SBS FR Torch *CCMC 13263-L SBS Premium* SBS Premium FR* SBS Premium Torch SBS Premium FR Torch Atactic Polypropylene (APP) APP 180 APP 180 FR APP Premium FR APP 180 FR COOL Why cool roofs matter. Firestone s modified bitumen membranes with UltraWhite granules provide greater light reflectivity and heat emissivity, which means the roof stays cooler, with lower building energy consumptions and reduced demand for electricity during peak periods. Reflective roofs using Firestone UltraWhite granules can also reduce the heat island effect that occurs when developed urban areas have significantly higher average temperatures than the rural areas surrounding them. Reflectiv- Emissivity SRI (Ini- SBS Products APP Products 0.73 0.84 89 0.73 0.84 89 SRI (Solar Reflectivity Index) ORNL (DOE) calculator, ASTM E 1980-01 Red Shield Warranty Protection

M o d i f i e d B i t u m e n Firestone Modified Bitumen Roofing Systems are extremely versatile and provide the architect, contractor and building owner with the ability to create new or re-roof systems that fit a variety of climates, environments and applications. The material s intrinsic flexibility easily adapts to building movement and large variations in temperature to accommodate all climates and applications. Simple, economic installation options heat welding, hot asphalt and cold-applied adhesive help save time and money. Firestone SBS Firestone Bitumen Roofing Systems combine exceptional elongation and fatigue resistance properties with the strength of a glass-reinforced polyester mat. Available in white, black and other granule surface colors, Firestone SBS membranes may be installed by heat welding, hot asphalt or cold-applied adhesive. Firestone APP Firestone Bitumen Roofing Systems are available in a variety of thicknesses in smooth and granule surfaces. Reinforced with a tough, nonwoven polyester mat, Firestone APP membranes deliver superior rooftop performance for both new and reroof applications. Firestone APP membranes may be installed by heat welding or with cold-applied adhesives. Firestone BuilT-Up Roofing (BUR) Systems Firestone offers Ply IV (4) and Ply VI (6) asphalt impregnated, glass fiber mat reinforced roofing felts that can be installed in multiple layers with a flood coat and aggregate or used in combination with modified bitumen. The Ply IV (4) and Ply VI (6) felts provide superior durability and ease of application to construct Firestone Built-Up Roofing (BUR) Systems. Self-Adhered Base Systems The 2-ply Firestone Self-Adhered Base System combines Firestone BASEGARD SA Base Sheet with either an APP or SBS cap sheet torch-applied directly over the base sheet. The system s specification flexibility allows specifiers to select the cap sheet best suited to job conditions and local installation practices. During torch application of the cap sheet, the fiberglass-reinforced base sheet serves as an effective work platform and thermal barrier. The base sheet also achieves complete fusion, assuring that the BASEGARD SA Base Sheet works as a redundant monolithic waterproofing layer beneath the cap sheet.

R o o f i n g M e m b r a n e Two-ply SBS or app in COLD ADHESIVE (with isogard hd cover board) Two-ply SBS or APP assembly incorporating high quality Firestone SBS or APP Base and Cap Sheets. Firestone SBS or APP UltraWhite Cap sheet Firestone Multi-Purpose MB Cold Adhesive Firestone MB (SBS or APP) Base Sheet Firestone Multi-Purpose MB Cold Adhesive Firestone ISOGARD HD Cover Board I.S.O. Twin Pack Insulation Adhesive Firestone ISO 95+ GL Insulation Firestone Fastener & Plate Firestone SBS Premium Torch FR Firestone BASEGARD SA Sheet FIRESTONE SBS GLASS FR Two-ply SBS assembly incorporating high-quality Firestone SBS Base and Cap Sheets. Firestone ISOGARD HD Cover Board Firestone ISO 95+ GL Insulation Firestone Fastener & Plate The Firestone Mod B.I.T.S. ( batten in the seam ) system is also available as a tough, easily installed, high-performance system for high wind areas.

M o d i f i e d B i t u m Simple Installation Firestone UltraFlash Liquid Flashing is installed with a 5-step procedure: 1. Lightly spray UltraFlash primer Firestone UltraFlash Liquid Flashing UltraFlash is a 2-part urethane liquid rubber flashing and coating that can be easily applied around vents, pipes, wires and other difficult rooftop details to create a durable, watertight seal. UltraFlash adheres well to many substrates including metal, concrete and wood, making it ideal for SBS and BUR applications. Additional attributes include: 2. Apply the initial layer of UltraFlash Liquid Flashing Fast cure time (1 hour or less depending on temperature and weather) Low VOC Forms a watertight chemical bond Can be painted with Firestone recommended coatings Abrasion and chemical resistant Suitable for ponding water conditions 3. Apply UltraFlash Fabric over initial application Can accept granules to match roof surface Firestone LiquiGard Adhesive New LiquiGard Adhesive is economical, low odor and contains zero VOC, improving conditions for installers. The 2-part urethane adhesive forms extremely strong bonds between roofing membranes, insulation and substrates, creating superior resistance to high winds. 4. Apply second layer of UltraFlash liquid flashing LiquiGard adhesive is ideal for schools, hospitals and other applications where using hot asphalt, heat welding with torches or smelly solvents is not acceptable. This proven adhesive provides a durable, odorless, watertight seal for modified bitumen systems. Additional attributes include: Low odor Durable, watertight bonds 5. Apply granules to match roof High wind uplift ratings Liquid adhesive easily applied with squeegee Available in 5-gallon pails Acceptable for up to 25-year Red Sheild Warranty coverage

e n A c c e s s o r i e s Firestone AcryliTop PC-100 Roof Coating Firestone white AcryliTop PC-100 coating can be applied to all APP, granulated SBS, smooth BUR, and RubberGard EPDM roof membrane systems. Tan and gray colors are also available, typically used with EPDM. AcryliTopPC-100 coatings provide significant solar reflectivity, help extend roof life, save energy and decrease pollution. A roof properly coated with AcryliTop PC-100 reflects at least 68% of the sun s energy after three years 30% higher than the minimum initial and aged reflectance requirements of the Environmental Protection Agency s ENERGY STAR program. The Cool Roof Rating Council posted the following rates: Solar Reflectance Thermal Emittance AcryliTop PC-100 Initial 3-yr. Initial 3-yr. White 0.82 0.73 0.87 0.84 Tan 0.53 0.48 0.88 0.83 Gray 0.32 0.34 0.88 0.82 Coating RubberGard EPDM Firestone AcryliTop PC-100 Base Coat for EPDM is specially designed to apply before the AcryliTop PC-100 top coat goes on an EPDM roof membrane system. Firestone Acrylic Base Coat for must be used when applying AcryliTop PC-100 to asphalt roof membrane systems. AcryliTop PC-100 coating can be spray-applied. When dry, it forms a monolithic coating and resists degradation from ozone and ultraviolet radiation, and provides good resistance to weathering and temperature extremes. Granule Surfaced Modified Bitumen BEFORE Acrylic Roof Coating System AFTER Firestone Multi-Purpose MB Cold Adhesive and Flashing Cement Firestone Multi-Purpose MB Cold Adhesive and Flashing Cement are modified with SBS, increasing adhesion to insulation and between plies, offering greater wind uplift resistance. You can complete seams with adhesive in two-ply SBS or two-ply APP Cool systems, eliminating the need to heat fuse the seams with a hot air welder or torch. Other Available Accessories SEBS Mopping Aluminum Fibered Roof Coating MB 2 Barbed Metal Lap Plates SA Primer Ceramic and UltraWhite Roofing

Firestone Building Products Modified bitumen product information ASTM Top Bottom Thickness Roll Weight Roll Product Designation Compound Reinforcement Surfacing Surfacing mils Pounds Coverage SBS SBS Cap SBS Torch SBS FR SBS FR Torch SBS GLass SBS Glass FR SBS Glass FR Torch SBS Smooth SBS Premium SBS Premium FR SBS Premium FR Torch SBS Metal Flash AL SBS Base SBS Base P 6164 Type I 6164 Type I 6164 Type I 6164 Type I 6163 Type I 6163 Type I 6163 Type I 6164 Type I 6164 Type II 6164 Type II 6164 Type II 6298 6163 Type I Grade S 260 g,/m 2 polyester with 260 g,/m 2 polyester with 260 g,/m 2 polyester with 1.9 lb/100 ft 2 Fiberglass Embossed Aluminum 155 155 155 155 150 150 150 140 160 160 160 150 90 97 pounds 97 pounds 98 pounds 98 pounds 98 pounds 98 pounds 98 pounds 90 pounds 100 pounds 103 pounds 103 pounds 100 pounds 83 pounds 150 Square SBS Glass Torch Base SBS Poly Torch Base SBS Premium Base app APP Premium FR APP160 APP160 Cool APP160W APP160 P APP170 APP170 Cool APP180 APP180 Cool APP180 W APP180 P 6163 Type I Grade S 6164 Type I Grade S 6163 Type II Grade S 6223 Type II 6222 Type I Grade S 6222 Type I Grade S 6222 Type I Fiberglass/ Scirm Laminate Tri-laminate interwoven glass and polyester mat/scrim 190 g,/m 2 polyester with continuous glass continuous glass Talc Burn-off flim Burn-off Burn-off Burn-off flim Burn-off flim Burn-off Burn-off 120 120 90 170 150 165 160 85 pounds 85 pounds 85 pounds 114 pounds 87 pounds 97 pounds 105 pounds 150 Square 98 Square 98 Square 98 Square APP180 FR APP180 FR Cool 6222 Type I Burn-off flim 160 107 pounds 98 Square APP80 Glass Base APP80 Glass Base P BUR 6509 APP Premium Base 6509 MB Base M 4601 Type II Oxidized Ply VI (6) 2i78 Type VI Oxidized Ply IV (4) 2i78 Type IV Oxidized Venting Base 4897 Type II Oxidized 1.7 lb/100 ft 2 Fiberglass 1.7 lb/100 ft 2 Fiberglass Standard colors are UltraWhite, white and black. Other colors are available with minimum purchase required. Burn-off Burn-off 80 97 pounds 80 97 pounds 197 Square 197 Square 45 75 pounds 300 Ft 2 /LPA /LPA 40 45 pounds 500 Ft 2 /LPA /LPA 35 40 pounds 500 Ft 2 115 67 pounds 100 Ft 2

firestone polyiso insulation Firestone has a full line of cost effective insulation products that provide additional protection for the structure and promote improved energy savings. With such a comprehensive line of offerings, you re sure to find the first insulation for your building. ISO 95+ GL flat Versatile and durable, ISO 95+ GL Flat is especially suited for FM approved and UL classified direct-to-deck applications/assemblies without an additional thermal barrier in most installations. Boards have a glass-reinforced facer on both sides of the foam core and can be attached with hot asphalt or low rise foam adhesive to various substrates, or mechanically fastened with Firestone fasteners and plates. ISO 95+ GL tapered When a substrate slope will not permit efficient drainage, Firestone Tapered ISO 95+ GL polyiso insulation provides an effective and economical solution. Properly installed, it can extend the life of the roof assembly by eliminating problems associated with ponded water. Additionally, the Firestone Tapered Network a free service that uses the latest technology to provide CAD drawings and other information works closely with the customer to make the system as effective and easy-to-install as possible. ISOGARD tm HD Cover Board A high-density cover board, ISOGARD HD combines impact resistance, mold resistance, energy savings and ease of installation in a single, durable product. It provides the highest thermal performance of any 1 2" insulation cover board product on the market and, because it s lightweight, easy to cut and easy to install, ISOGARD HD can offer savings from reduced transportation costs, labor and material during application. ISOGARD HD provides excellent wind uplift performance, meaning fewer fasteners are required than other comparable products. Resista TM Polyiso Insulation Board RESISTA is an economical insulation choice that provides fire, wind and environmental protection that is compatible or better than other organic-faced materials. RESISTA is a smart choice to add an enhanced degree of resistance to any roofing system, standing out in the three critical areas of thermal resistance, fire resistance and mold resistance. Thermal Resistance RESISTA can also contribute to overall LEED certification due to its thermal efficiency, recycled content and zero ozone depletion. Fire Resistance RESISTA has a UL Class A rating for fire resistance when used over combustible decks and is compatible with single-ply and modified bitumen roofing systems. Some competitors may require up to 3.1" insulation to achieve comparable ratings. Mold Resistance Resista meets ASTM D3273 standards for mold resistance. It is double coated on both sides with a unique non-organic facer material, providing it with exceptional mold inhibiting properties. Additional benefits Environmentally friendly (contains no hydrochlorofluorocarbons) Helps sustain the environment Enhanced FM codes utilizing reduced fastening with Resista Polyiso and ISOGARD HD Board Easy manipulation and placement can reduce installation time and labor costs

Firestone Building Products 250 West 96th St., Indianapolis, IN 46260 Corporate Office: 1-800-428-4442 317-575-7000 Firestone Building Products Canada 2835 Argentia Rd., Unit #2 Mississauga, ON L5N 8G6 1-888-292-6265 905-363-3150 Fax: 877-666-3022 International Offices: Firestone Building Products Europe Ikaroslaan 75-1930 Zaventem, Brussels, Belgium +32 2 7114450 Fax: +32 2 7212718 www.firestonebpco.com Firestone Building Products Latin America 8200 NW 52nd Terrace, Suite #107 Miami, FL 33166 305-471-0117 Fax: 305-471-0377 Note: This brochure is meant only to highlight Firestone s products and specifications. Information is subject to change without notice. all products and specifications are listed in approximate weights and measurements. For complete product and detail information, please refer to the Technical Manual. Firestone takes responsibility for furnishing quality materials which meet Firestone s published product specifications. As neither Firestone itself nor its representatives practice architecture, Firestone offers no opinion on, and expressly disclaims any responsibility for, the soundness of any structure on which its products may be applied. If questions arise as to the soundness of a structure or its ability to support a planned installation properly, the owner should obtain opinions of competent structural engineers before proceeding. Firestone accepts no liability for any structural failure or for resultant damages, and no Firestone representative is authorized to vary this disclaimer. Printed on Recycled Paper