ELECTRICAL EXAM KIT REV Octber 2012 FIELD SAFETY REPRESENTATIVE A B C Includes inf fr; Electricians, Certified Master Electricians, Prfessinal Engineers & Applied Science Technlgists
This dcument cntains the fllwing infrmatin: p 3... List f exam reference materials p 4... Instructins fr exam candidates p 5... C Field Safety Representative (FSR) prerequisites and scpe p 6... B Field Safety Representative (FSR) prerequisites and scpe p 7... A Field Safety Representative (FSR) prerequisites and scpe... (Includes inf fr Certified Master Electricians, Alberta) p 8... Dcumentatin Requirements fr High Vltage Experience. p 9... Dcumentatin Frm fr High Vltage Experience. p 10.. Errata fr 2009 Canadian Electrical Cde (Dec 2010) p 13.. Exam Plicies p 15.. EXAM APPLICATION FORM 2
BC SAFETY AUTHORITY ELECTRICAL SAFETY PROGRAM ELECTRICAL EXAMINATION REFERENCE MATERIAL ELECTRICAL FIELD SAFETY REPRESENTATIVE (FSR), CERTIFICATE OF QUALIFICATION (C f Q) ALL CLASSES Electrical examinatins will be based n the latest Act and pursuant regulatins. As part f the regulatry changes, inclusin f applicable safety standards is being emphasized. Examinees shuld have knwledge f the reference material and applicable standards required within the scpe f the certificate applied fr. Request fr infrmatin abut any class f examinatin shuld be directed t yur lcal BC Safety Authrity ffice. Examinatins are pen bk; examinee must prvide their wn reference materials fr writing the examinatin. The Canadian Electrical Cde Handbk r Pcket Reference are nt allwed. Pages with markings in reference material such as frmula and examples r calculatins are t be remved befre exam date. Crss referencing ntes and highlighting are acceptable. Material will be checked befre & after exam. N ther reference materials except as nted in the reference material list fr the specific examinatin may be used. ELECTRICAL REFERENCE MATERIAL LIST: Fr examinatins yu will be required t prvide the current editin f the fllwing: 1. Safety Standards Act [S.B.C., 2003, Ch. 39] 2. Safety Standards General Regulatin, B.C. Reg. 105/2004 3. Electrical Safety Regulatin, B.C. Reg. 100/2004 4. B.C. Electrical Cde Regulatin 4. a. The 2009 Canadian Electrical Cde, Part I, 21 st Editin C22.1-09, 4. b. Latest Errata t CSA Standard C22.1-0X-CEC [see attachment.]) 4. c. Deemed amendments fr the purpses f adpting Canadian Electrical Cde. (See Electrical Safety Regulatin, Sectin 20 and the Schedule.) 5. BC Safety Authrity, Fee Schedule 6. BC Safety Authrity, Electrical Infrmatin Bulletins 7. BC Safety Authrity, Electrical Directives In additin t the abve, fr examinatins in class A, LI, and Electrical Safety Officer yu will be required t prvide the fllwing: 8. CAN/CSA-C22.3 N. 1- XX, Overhead Systems Ntes: Legislative dcuments (Acts and Regulatins) are available n the BC Safety Authrity web site: www.safetyauthrity.ca. Electrical Fee Schedule, Bulletins, and Directives are available n the BC Safety Authrity web site at www.safetyauthrity.ca. They are nt available frm Crwn Publicatins. Legislative dcuments (Acts & Regulatins) and the Canadian Electrical Cde are available frm: Crwn Publicatins Inc., (250) 386-4636, 106 Ontari Street, Victria, BC V8V 1M9 E-mail: crwn@crwnpub.bc.ca, Website: www.crwnpub.bc.ca Cpies f the Canadian Electrical Cde are available frm Canadian Standards Assciatin, www.shpcsa.ca and varius electrical whlesalers. 3
INSTRUCTIONS FOR EXAM CANDIDATES Please review prir t writing exam. 1. Yu must prvide pht identificatin t the exam invigilatr. 2. The time limit fr this examinatin varies depending n exam written. Be sure yu are attempting the crrect examinatin paper. 3. Only authrized reference material are permitted in the exam rm: Safety Standards Act, General and Electrical Safety Regulatins; BC Electrical Cde Regulatin; (Canadian Electrical Cde, BC Amendments and CSA Errata), BCSA Bulletins, BCSA Directives, and BCSA Fee Schedule, and ther listed Standards. The Canadian Electrical Cde Handbk ( an explanatin f the rules ) and the Canadian Electrical Cde Pcket Reference are NOT allwed. Markings in reference materials such as frmula and examples r calculatins are t be remved. Crss reference ntes and highlighting are acceptable. N ther reference materials except as nted in the reference material list fr the specific examinatin may be used. 4. Only nn-prgrammable calculatrs are permitted in the exam rm. Calculatrs incrprating tapes r any frm f pre-prgrammable recrding devices are nt allwed. 5. Items that will nt be permitted int the examinatin rm: Ntes, scrap papers, briefcases r similar items, backpacks, cellular telephnes, lap tps, nte pads, palm held persnal digital assistants r prgrammable recrding devices r similar. 6. D nt cmmunicate with ther examinees. All questins must be directed t the invigilatr. 7. All answers must be marked in pen with an X n the answer sheet prvided. 8. Incrrect answers will nt receive a penalty. A minimum mark f 70% is required t pass 9. Calculated answers t questins have been runded ff. 10. At the end f the examinatin, yu must wait t be signed ut. The cmplete examinatin, answer sheet and all wrking papers (whether used r nt) must be returned t the invigilatr befre leaving. Cunt the numbered sheets issued and ensure that all sheets are returned. The invigilatr will check reference material t ensure ntes frm the examinatin have nt been added. Material s marked will be phtcpied, attached t the returning exam package and may invalidate the examinatin. 11. Cntraventin f any instructin r rule may result in failure/disqualificatin. 12. Results f the examinatin will be mailed t yu in three t fur weeks. N results will be given by telephne and the examiner will nt review graded examinatins with the examinee. 13. Invigilatr and examinee t cmplete infrmatin requested n answer sheet and all wrking calculatin sheets. 4
Electrical Class Type: C FSR Field Safety Representative Class Type: Class Cde: Descriptin: Scpe: EL FSR C Field Safety Representative, Class C May make declaratins n behalf f their emplyer fr regulated electrical wrk nly with respect t electrical installatins in which the current and vltage f the installatin d nt exceed 200 amps and 150 vlts t grund, single phase pwer. Cntact Security Prgrams and Plice Technlgy Divisin, Plicing and Cmmunity Safety Branch regarding installatins f security systems and CCTV. A declaratin is a statement made in writing by an electrical Field Safety Representative that a regulated prduct has been installed r regulated electrical wrk has been perfrmed, in cmpliance with the Act and regulatins. Prerequisites: 1) ELECTRICIANS; Canadian Interprvincial Qualificatin (Red Seal) in the Trade f Electrician r a BC TQ in Electrical Wrk r Industrial Electrical, r BC Exemptin Permit in the Trade f Electrician (EWX) One f the abve and; A minimum f ne year acceptable relevant electrical wrk experience after receiving a Certificate f Qualificatin in the Trade f Electrician, staff verified true cpy f C f Q. Original letter f cmpletin frm instructr f a recgnized electrical curse in the applicatin f electrical cdes and standards cmpleted within 3 years f applicatin date. Pay the required fee and Pass the Class C certificate 3½ hur examinatin. 2) ELECTRICAL APPLIED SCIENCE TECHNOLOGIST, ASTT. ; Qualificatins in electrical engineering technlgy (pwer ptin) and prvide acceptable prf f relevant training and wrk experience. A valid registratin as an Applied Science Technlgist and a member in gd standing with the Applied Science Technlgists and Technicians f British Clumbia (AScTT BC), Pay the required fee and Pass the applicable Class certificate examinatin. See Electrical Safety Regulatin, # 9 fr details. Area f Study: Applicable items frm the Reference Material List and all f the B.C. Electrical Cde Regulatin except Sectin 36. 5
Electrical Class Type: B FSR Field Safety Representative Class Type: Class Cde: Descriptin: Scpe: EL FSR B Field Safety Representative, Class B May make declaratins n behalf f their emplyer fr regulated electrical wrk nly with respect t electrical installatins in which the vltage f the cmpleted installatin des nt exceed 750 vlts. The scpe als cvers the Undergrund Raceway scpe, allwing undergrund cnduit installatins at any vltage. Cntact Security Prgrams and Plice Technlgy Divisin, Plicing and Cmmunity Safety Branch regarding installatins f security systems and CCTV. A declaratin is a statement made in writing by an electrical Field Safety Representative that a regulated prduct has been installed r regulated electrical wrk has been perfrmed, in cmpliance with the Act and regulatins. Prerequisites: 1) ELECTRICIANS; Canadian Interprvincial Qualificatin (Red Seal) in the Trade f Electrician r a BC TQ in Electrical Wrk r Industrial Electrical, r BC Exemptin Permit in the Trade f Electrician (EWX) One f the abve and; A minimum f ne year acceptable relevant electrical wrk experience after receiving a Certificate f Qualificatin in the Trade f Electrician, staff verified true cpy f C f Q. Original letter f cmpletin frm instructr f a recgnized electrical curse in the applicatin f electrical cdes and standards cmpleted within 3 years f applicatin date. Pay the required fee and Pass the Class B certificate 3½ hur examinatin. 2) ELECTRICAL APPLIED SCIENCE TECHNOLOGIST, ASTT. ; Qualificatins in electrical engineering technlgy (pwer ptin) and prvide acceptable prf f relevant training and wrk experience. A valid registratin as an Applied Science Technlgist and a member in gd standing with the Applied Science Technlgists and Technicians f British Clumbia (AScTT BC), Pay the required fee and Pass the applicable Class certificate examinatin. See Electrical Safety Regulatin, # 9 fr details. Area f Study: Applicable items frm the Reference Material List and all f the B.C. Electrical Cde Regulatin except Sectin 36. 6
Electrical Class Type: A FSR Field Safety Representative Class Type: Class Cde: Descriptin: Scpe: Prerequisites: Area f Study: EL FSR A Field Safety Representative, Class A May make declaratins n behalf f their emplyer fr any type f regulated electrical wrk. Cntact Security Prgrams and Plice Technlgy Divisin, Plicing and Cmmunity Safety Branch regarding installatins f security systems and CCTV. A declaratin is a statement made in writing by an electrical Field Safety Representative that a regulated prduct has been installed r regulated electrical wrk has been perfrmed, in cmpliance with the Act and regulatins. 1) ELECTRICIANS; Canadian Interprvincial Qualificatin (Red Seal) in the Trade f Electrician r a BC TQ in Electrical Wrk r Industrial Electrical, r BC Exemptin Permit in the Trade f Electrician (EWX) One f the abve and; A minimum f tw years acceptable relevant electrical wrk experience after receiving a Certificate f Qualificatin in the Trade f Electrician, staff verified true cpy f C f Q. Original letter f cmpletin frm instructr f a recgnized electrical curse in the applicatin f electrical cdes and standards cmpleted within 3 years f applicatin date. Pay the required fee and Pass the Class A certificate 3½ hur examinatin. Dcument high vltage experience (minimum 3 installatins) since btaining trade certificate. Use BC Safety Authrity High Vltage frms signed by the FSR named n the cntractr s license; shwing FSR registratin number, class and riginal signature. Only frms shwing riginal signatures f FSR and applicant are acceptable. Where a FSR cannt verify experience, an riginal ntarized statement r statutry declaratin is required. Dcuments with riginal stamp and signature(s) are t be attached t the applicatin. 2) CERTIFIED ALBERTA MASTERS; A current Certificate f Qualificatin fr Certified Master Electrician (CME) Alberta, (as per the TILMA Agreement) Current is interpreted as being valid within the nted expiry date n the certificate Evaluatin f CME certificate and qualificatins t ensure there are n restrictins On the certificate The abve and; Cnfirmatin f Interprvincial qualificatin is nt required fr a valid CME hlder; hwever recrd the Interprvincial number if available Pay the required fee Pass the ARD 2 hur examinatin. Applicable items frm the Reference Material List (items 1, 2,3,4(c),5,6,7) 3) ELECTRICAL PROFESSIONAL ENGINEER, P.Eng. Qualificatins in electrical engineering (Degree in Electrical Engineering) and Prvide acceptable prf f relevant training and wrk experience. A valid registratin as a Prfessinal Engineer and a member in gd standing with the Assciatin f Prfessinal Engineers and Gescientists f British Clumbia (APEG BC), Pay the required fee and Pass the applicable Class certificate examinatin. See Electrical Safety Regulatin, # 10 fr details. 4) ELECTRICAL APPLIED SCIENCE TECHNOLOGIST, ASTT. ; Qualificatins in electrical engineering technlgy (pwer ptin) and prvide acceptable prf f relevant training and wrk experience. A valid registratin as an Applied Science Technlgist and a member in gd standing with the Applied Science Technlgists and Technicians f British Clumbia (AScTT BC), Pay the required fee and Pass the applicable Class certificate examinatin. See Electrical Safety Regulatin, # 9 fr details. Area f Study: Fr Class A exam, applicable items frm the Reference Material List & all f the B.C. Electrical Cde Regulatin. 7
BC SAFETY AUTHORITY HOW TO VERIFY RELEVANT HIGH VOLTAGE (H.V.) ELECTRICAL WORK EXPERIENCE FOR: FIELD SAFETY REPRESENTATIVE (F.S.R.), CERTIFICATE OF QUALIFICATION (C. f Q.), CLASS A EXAMINATION OVERVIEW OF REQUIRED PROCEDURE Verificatin f High Vltage experience acceptable t the Electrical Safety Manager is required when making applicatin fr Class A Electrical Examinatin. Gather yur High Vltage experience dcumentatin as detailed belw, attach t yur Applicatin fr Electrical Field Safety Representative Certificate f Qualificatin Examinatin alng with the apprpriate additinal dcumentatin as applicable. 1.0 H.V. Experience is acceptable: when btained after yu received yur certificate f qualificatin in the trade f electrician. when undertaking electrical installatins in which the vltage exceeds 750 vlts. when perfrmed under applicable Canadian Electrical Cdes 2.0 Examples f H.V. installatins include electrical equipment/systems such as: Grunding, switchbard, breakers, discnnects raceway/cnductrs, cables, and terminatins/stress cnes, splicing kits, substatins, unit substatins, transfrmers, starters, mtrs and verhead lines. 3.0 Hw much H.V. experience is required: Experience must have been gained n a minimum f three (3) different prjects. Prjects f extended duratin with a lt f extensive H.V. experience may be cnsidered as fulfilling the requirements. Clarify by submitting apprpriate additinal written dcumentatin, sign and date. Cmpletin f a H.V. training curse may be cnsidered as part f the requirements. Attach verified true cpy f a letter f cmpletin f the H.V. training. (BCIT Curse: H.V. Level 1 TELC 0161 is equivalent t ne prject). 4.0 H.V. experience is nt acceptable: If the scpe f wrk was limited t cleaning f H.V. vaults, equipment r insulatrs. If the scpe f wrk was limited t service r maintenance f H.V. electrical equipment with n ther H.V. training r H.V. installatin experience. If the scpe f wrk was limited t installatin f grunding, raceway, testing r aircraft landing lighting. 5.0 Hw t dcument yur H.V. experience: Step 1: cmplete three (3) cpies f the frm Dcumentatin f H.V. Electrical Wrk Experience fr FSR C f Q, Class A Examinatin Applicatin, (ne fr each prject), see step 1 n next page: utline the electrical equipment, system and installatin, and describe the scpe f electrical wrk and the specific duties yu perfrmed. 5.1 Step 2: frward the frms with yur riginal signature t the electrical cntractr that was issued a permit fr the prject. Request that the Field Safety Representative (Class A ) respnsible fr the installatin wh has knwledge f yur experience: Cmpletes the lwer prtin f each applicable frm r. 5.2 Alternate t step 2: if yu are unable t cntact the previus emplyer(s) r cmpany(s): an riginal swrn affidavit/ntarized statutry declaratin utlining yur H.V. wrk experiences is required. cmplete the upper prtin f the H.V. Experience frms and attach these and ther additinal supprtive dcumentatin as Exhibits A, B, C, etc. f the affidavit. 5.3 nly frms shwing riginal signatures will be accepted. See next page fr dcumentatin frm. 8
BC SAFETY AUTHORITY ELECTRICAL DOCUMENTATION OF HIGH VOLTAGE (H.V.) ELECTRICAL WORK EXPERIENCE FOR FIELD SAFETY REPRESENTATIVE (F.S.R.) CERTIFICATE OF QUALIFICATION (C f Q) CLASS A EXAMINATION APPLICATION. NOT REQUIRED FOR P.Eng r Certified Master Electrician applicatins. Sheet f STEP 1 [Read previus page(s) fr instructins & prcedure] [Ensure legibility] Yu must verify relevant high vltage electrical wrk experience, which is acceptable t the Electrical Safety Manager. Attach cpies f these frms t riginal emplyer letters dcumenting yur experience. Prject / Installatin Name Lcatin Date (YYYY / MM / DD) Electrical Cntractr Lcatin Prvince Vltage f Prject Equipment Prject Duratin, N. f Mnths Estimate N. f Days n H.V. Wrk Descriptin f the electrical equipment, systems installed & the scpe f wrk perfrmed n the abve Prject / Installatin: (Cntinue n reverse if required.) I certify that the dcumentatin submitted with this applicatin and the infrmatin abve accurately reflects my experience and all statements made by me n this frm are true and crrect. Surname, Given Name and Middle Initial BCSA Electrical Safety FSR Registratin N. Signature riginal must appear n frm submitted Area Cde & Day Phne N. Dated (YYYY / MM / DD) STEP 2 [Read previus page(s) fr instructins, prcedure and alternate t belw] This frm must be dated & signed by the Class A Field Safety Representative f the electrical cntractr that was issued a permit fr the abve prject and attached t an riginal (letterhead) signed cmpany letter dcumenting the experience. Only a FSR Class A may attest t yur submissin. I, have knwledge f and agree with the abve descriptin f wrk experience gained by this applicant n the abve prject/installatin. Area Cde & Day Phne N. Cnfirm F.S.R. Class A' BCSA Electrical Safety FSR Registratin N. Signature riginal signature must appear n frm submitted Dated (YYYY / MM / DD) FOR OFFICE USE ONLY: CLASS: A, HV1, HV2, HV3, F.S.R. CLASS, STATUS E.C. Dcument Apprved By:, 9
10 FOR USE WITH 2009 CODE ONLY
ERRATA 2/3 11
12 ERRATA 3/3
13
14
15