Gages and Accessories,37 mm 30,8 mm.05".0" FAST EASY ACCURATE-gages and settg fixtures. Gage s and Ps All Sunnen Dial Bore Gages read out,00 mm (or.000")* and feature all-carbide gagg pots, wear-proof ball crank, and adjustable centralizers. Each gage comes packed its own sturdy box with all tools and wrenches required for setup and adjustment. *(,00 mm [.0005"] readg gages are also available. Contact Customer Service for price and availability.) Model CF- Settg Fixture, shown with GR- Gage. Model CF-50 Settg Fixture with CF-50 size settg adapter for use as shown with GR-0 Gage. Model CF-50 Settg Fixture, shown with GR- Gage. s and ps must be ordered separately. Diameter ranges, gagg depths and part numbers are listed below. and Matchg Ps For GRM/GR-0 (order separately) GRM/GR-0 Dial Bore Gage,37 mm 3, mm {.05".535"} Assembly consists of a,00 mm readg dicator, probe retractor and probe retaer bushg a reforced nylon sulatg shroud. Order GR-0 for.000" readg. : kg ( lbs.) GR-9 Gage GA-0 Gage mm mm mm,37 -,55,50 -,90 0 -,0,05 -,5,5-5,50-3,00 5-3,5 3,00-3,50 3,5-35 3,50 -,00 35 -,5,0 -,80 0-5,30 5,0-5,80 50 -,30,0 -,80 0-7,30 7,0-7,80 70-8,30 8,0-8,80 80-9,30 9,0-9,80 9,0-0,0 0,0 -,0,0 -,0,0-3,0.05 -.0.059 -.075.07 -.087.08 -.09.089 -.08.098 -.8.08 -.8.8 -.38.8 -.8.38 -.57.8 -.7.5 -.89.85 -.09.05 -.8. -.8. -.8. -.87.83 -.307.303 -.37.33 -.3.33 -.3.3 -.38.370 -.7.09 -.57.9 -.9. -.535 G-055 G-070 G-080 G-090 G-00 G-0 G-0 G-30 G-0 G- G-0 G-00 G-0 G-0 G-0 G-80 G- G-30 G-30 G-00 G-0 G-80 P G-037 G-059 G-089 G-.3.3.3.3 7 7 7 7..9.9.9 G-5A and P Storage Case
GR-0 Dial Bore Gage Accessories Extension* Available for probes 8, mm (.33") or larger. extensions are 3,5 mm ( / ") long, and up to three can be assembled together. : KZX-3500. Bld Hole s and Ps Order standard probe and transfer p number and add -KZ0X to number. Example: G-0-KZ0X. Note: G-055 probe and G-037 transfer p not available bld hole configuration. Available weeks after receipt of order. Carbide Inserted Gage s and Ps For applications where gage pots are exposed to extreme wear conditions such as heavy production, rough workpieces or abrasive materials. Not available sizes smaller than, mm (.5"). Order standard probe and transfer p number and add -KY5X to number. Example: G-0-KY5X. Available - weeks after receipt of order. Kits kits to cover the more popular diameters are available as listed below. Both kits are supplied a hged, nested box. G-305 Kit Consists of 5 probes and transfer ps. Covers a contuous diameter range from, mm- 3, mm (.5"-.535"). :, kg (.5 lb.) G-00 G-0 G-0 G-0 G-80 G- G-30 G-30 G-00 G-0 G-80 mm,0/,80 0/5,30 5,0/5,80 50/,30,0/,80 0/7,30 7,0/7,80 70/8,30 8,0/8,80 80/9,30 9,0/9,80 9,0/0,0 0,0/,0,0/,0,0/3,0 G-3050 Kit Consists of probes and matchg transfer ps which cover a, mm-3, mm (.5"-.535") diameter range on even /" crements. :, kg (.5 lb.) G-0 G-0.5/.89.85/.09.05/.8./.8./.8./.87.83/.307.303/.37.33/.3.33/.3.3/.38.370/.7.09/.57.9/.9./.535 mm,0/,80,0/,80 70/8,30 9,0/9,80 0,0/,0,0/3,0.5/.89./.8.303/.37.3/.38.09/.57./.535 P G- P G- Right Angle Attachment* Available for special conditions where it is difficult to read the gage or the total gage height causes a problem. : KZX-90. *Standard CF-50 Settg Fixture nest does not work with these accessories. Alternative methods of settg size must be used. Available weeks after receipt of order. CF-50 Size Settg Adapter Centers gage probes between parallel reference surfaces on CF-50 Settg Fixture. Serves as an extra pair of hands to help nullg the gage on both the horizontal and vertical axis. Assures fast, accurate setup of the gage. : kg ( lbs.) Settg Fixtures CF-50M (metric),37 mm-50,8 mm CF-50 (ch).05"-.00" For use with 0, 000, 000, and 9000 Series Dial Bore Gages. CF-50M comes with 0-5 mm micrometer head marked,00 mm crements with precision lapped carbide anvils. Includes a rg gage checkg standard and three terchangeable nests. (Use of CF-50M/CF-50 with 0 series gage requires the purchase of CF-50 Size Settg Adapter.) Settg Master has a rugged, stress-relieved cast-iron base and may be used without removg it from its protective case. CF-50 is equipped with a 0"-" micrometer head marked.000" crements. CF-50M/CF-50 :,5 kg (0 lbs.) Replacement Gage Nests For CF-50M Metric & CF50: CF-50M, mm-9, mm 8,8 mm-30, mm 30,0 mm-50,0 mm CF-50 CF-550A.95"-.750" CF-50A.70"-.9" CF-570A.8"-.00" CF-37 Micrometer Adjustg Wrench CF-38 Spdle Lock Knob CF-5A Magnifier CF-57A Calibration Rg Shown with CF-50 Settg Fixture. 5
GAM/GA-000 Series Gages, mm 9,0 mm {.95".750"} Non-retractable gage with,00 mm metric or (.000") readg dicator. Capable of measurg to with 5,0 mm (.00") of the bottom of a bld hole. Electronic SPC dial bore gages listed on page 9. Indicators readg,00 mm or.0005" are available on special order. Replacement s For GAM/GA-000 Series Gages: G-75MA Quick Settg Wrench (Metric readg) G-75A Quick Settg Wrench (Inch readg) G-85A Indicatg Ball Removal Tool G-89A Indicatg Fger Clamp PBR-505A Indicatg Ball (/" Diameter Carbide) G-A Centralizer Pots (Package of ) G-MA # Pot Assembly (metric), mm- mm diameter G-A # Pot Assembly (ch).95"-.580" diameter G-MA # Pot Assembly (metric) mm-,9 mm diameter G-A # Pot Assembly (ch).580"-.5" diameter G-3MA #3 Pot Assembly (metric),9 mm-9,0 mm diameter G-3A #3 Pot Assembly (ch).5"-.750" diameter GAM-05 GAM-0 GAM- GA-05 GA-0 GA- 5 75 / 5 7 87 5 30 7 5 / 9 3 / 3 / GRM/GR-000 Series Gages 8,8 mm 30, mm {.70".90"} Retractable gage with,00 mm metric or (.000") readg dicator. Capable of measurg to with,8 mm (.70") of the bottom of a bld hole. Electronic SPC dial bore gages listed on page 9. Indicators readg,00 mm or.0005 are available on special order. Replacement s For GRM/GR-000 Series Gages G-375MA Quick Settg Wrench (Metric readg) G-375A Quick Settg Wrench (Inch readg) G-385A Indicatg Ball Removal Tool G-389A Indicatg Fger Clamp PBR-50A Indicatg Ball (3/3" Diameter Carbide) G-37A Centralizer Pots (Package of ) G-3MA # Pot Assembly (metric) 8,8 mm-, mm diameter G-3A # Pot Assembly (ch.70"-.890" diameter G-3MA # Pot Assembly (metric), mm-, mm diameter G-3A # Pot Assembly (ch).890"-.0" diameter G-33MA #3 Pot Assembly (metric), mm-30, mm diameter G-33A #3 Pot Assembly (ch).0"-.9" diameter GRM-07 GRM- GRM- GR-07 GR- GR- 3 / 35 98 5 9 3 / / 7 / Special Dial Bore Gages are available on a special order basis. GA/GAM- 000 Indicator cannot be peaked at lengths longer than 75 mm (7") therefore gage accuracy To order special length dial bore gages, specify as follows: GA/GAM-_X. The _ is the desired gagg length multiplied by ( ches). Available weeks after receipt of order. CF-50 Settg Fixture Metric version CF-50M has a 0 to 5 mm Micrometer head marked,00 mm crements. Supplied a sturdy, nested box. CF-50 for.05" to.000" diameters is equipped with a large micrometer head with range of 0" to " marked.000" crements. Special Dial Bore Gages are available on a special order basis. GR/GRM-000 Indicator cannot be peaked at lengths longer than 305 mm (") therefore gage accuracy To order special length dial bore gages, specify as follows: GR/GRM- _X. The _ is the desired gagg length multiplied by ( ches). Available weeks after receipt of order. Shown with GR- Gage.
GRM/GR-9000 Series Gages GAM/GA-000 Series Gages (Non-Retractable) GRM/GR-000 Series Gages (Retractable) 30,0 mm 50,8 mm {.8".0"} 50 mm mm {.0".0"} Retractable gage with,00 mm metric or (.000") readg dicator. Capable of measurg to with Non-retractable gage with,00 mm metric or (.000") 8,5 mm (.335") of the bottom of a bld hole. readg dicator. Capable of measurg to with 3 mm Electronic SPC dial bore gages listed on page 8. (.500") of the bottom of a bld hole. Electronic SPC Indicators readg,00 mm or,0005" are dial bore gages listed on page 9. Indicators readg available on special order.,00 mm or.0005" available on special order. Replacement s For GRM/GR-9000 Series Gages: G-75MA Quick Settg Wrench (Metric readg) G-75A Quick Settg Wrench (Inch readg) G-85A Indicatg Ball Removal Tool G-89A Indicatg Fger Clamp PBR-503A Indicatg Ball (/8" Diameter Carbide) G-7A Centralizer Pots (Package of ) G-MA # Pot Assembly (metric) 30,0 mm-35, mm diameter G-A # Pot Assembly (ch).8"-.385" diameter G-MA # Pot Assembly (metric) 35, mm-0, mm diameter G-A # Pot Assembly (ch).385"-9" diameter G-3MA #3 Pot Assembly (metric) 0, mm-5, mm diameter G-3A #3 Pot Assembly (ch) 9"-.795" diameter G-MA # Pot Assembly (metric) 5, mm-50,8 mm diameter G-A # Pot Assembly (ch).795"-.0" diameter GRM-907 GRM-9 GRM-9 GR-907 GR-9 GR-9 3 / 37 5 9 / 3 / 7 3 / Special Dial Bore Gages are available on a special order basis. GR/GRM-9000 Indicator cannot be peaked at lengths longer than 35 mm (5") therefore gage accuracy To order special length dial bore gages, specify as follows: GR/GRM-9_X. The _ is the desired gagg length multiplied by ( ches). Available weeks after receipt of order. Note: Sunnen 000 Series Dial Bore Gages can be extended to 30,8 mm (") by addg oversize centralizer pots and additional gage pot extensions. For gagg diameters the range of 5, mm-30,8 mm ("-") order: G-8A Gage Extension Kit. Consists of: Two Oversize Centralizer Pots, G-3A #7 Gage Pot Extension, G-3A #8 Gage Pot Extension. 000 Series Gages assembled with G-8A Gage extension set cannot be used with CF- settg fixture when set for diameters above 03, mm (8"). Alternative methods of settg gage must be used. *Available - weeks after receipt of order. Extension sleeves are available for convertg GAM/GA-000 Series Gages to different lengths. The followg extension sleeves are available: GA-03 Accessory Extension Sleeves 75 mm (3") GA-0 Accessory Extension Sleeves mm (") GA- Accessory Extension Sleeves mm (") GA- Accessory Extension Sleeves 00 mm (") Retractable gage with,00 mm metric or (.000") readg dicator. Capable of measurg to with 3 mm (.500") of the bottom of a bld hole. Electronic SPC dial bore gages listed on page 9. Indicators readg,00 mm or.0005" available on special order. *Furnished with metal case for accessories only. GAM-03 GAM-0 GAM- GAM-* GA-03 GA-0 GA- GA-* 75 00 3 03 80 3 737 8 7 9 Replacement s For 000 Series Gages: PBR-503A Indicatg Ball (/8" Diameter Carbide) G-5A Centralizer Pots (Package of ) G-0A Indicatg Ball Removal Tool G-0A # Pot Assembly 50,8 mm-0,3 mm (.0"-.375") G-A # Pot Assembly 0,3 mm-9,8 mm (.375"-.750") G-A #3 Pot Assembly 9,8 mm-79, mm (.750"-3.5") G-3A # Pot Assembly 79, mm-,9 mm (3.5"-3.500") G-A #5 Pot Assembly,9 mm-98, mm (3.500"-3.750") G-5A # Pot Assembly 95,3 mm-07,9 mm (3.750"-.50") G-5A Gage Pot Assembly Ball Removal Tool G-38A Gage Pot Assembly Wrench Special Dial Bore Gages are available on a special order basis. 000 Series Indicators cannot be peaked at lengths longer than mm (5") therefore gage accuracy To order special length dial bore gages, specify as follows: G_-_X. The second _ is the desired gagg length ( ches). Available weeks after receipt of order. 7 GRM-0 GR-0 GRM- GR- GRM-* GR-* 00 80 3 737 7 9
Settg Fixtures CF-M (metric) CF- (ch) 5 mm 03 mm {.0" 8.0"} For use with 000 Series Dial Bore Gages. Makes gage settg fast and easy. Micrometer adjustment allows dialg sizes. A precision tool, shipped with convenient storage case. : 9,5 kg ( lbs.) LUX Series Electronic Dial Bore Gages Features Models + Special s. All 0, 000, 000, 000 Series Available Metric/Inch Conversion,00 mm or.000 Divisions Display Swivels 330 for any Position SPC Capability Preset, zero set, +/- direction and Go/No Go functions. Communicates with Sunnen GageTalker, Data Myte, Mitutoyo, or Personal Computers. Elimates micrometers and rg gages. Elimates errors and feel settg gages. Sets 000 Series gages seconds. Includes,00 mm (.000") micrometer head with precision lapped carbide anvils. Comes with a rg gage checkg standard and precision settg standards 5, mm (") crements. Settg Master has a rugged, stress-relieved, cast iron base. May be used without removg from its protective case. Settg Fixtures are shipped complete with settg standards to cover 50 mm-5, mm ("-") range. A settg standard is not required to measure the 78 mm-03 mm (7"-8") range. When measurg the 5 mm-78 mm ("- 7") range order: CF-30A 5-78 mm (metric) CF-0A "-7" (ch) CF-M Replacement Settg Standards: CF-30A* 50-75 mm CF-330A* 75-00 mm CF-30A* 00-5 mm CF-350A* 5- mm CF-30A 5-78 mm *Included with CF-M CF- Replacement Settg Standards: CF-0A* "-3" CF-30A* 3"-" CF-0A* "-5" CF-50A* 5"-" CF-0A "-7" *Included with CF- CF-5A CF-5A Magnifier Calibratg Rg Reach mm mm,37 mm-3, mm.05"-.535", mm-9,0 mm 8,8 mm-30, mm 30,0 mm-50,8 mm 50,0 mm- mm.95"-.750".70"-.90".8"-.0".0"-.0" *Refer to page for Selection and Reach formation. For formation on Special Electronic Dial Bore Gages, contact Customer Service Department. Accessories LUX-B Replacement Battery GR-0-LUX GA-05-LUX GA-0-LUX GA--LUX GR-07-LUX GR-LUX GR-LUX GR907-LUX GR-9-LUX GR9-LUX GA-03-LUX GA-0-LUX GA--LUX GR-0-LUX GR--LUX GR--LUX * * 5 75 75 00 / 5 7 3 / 3 / 3 CF-0A Adapter Kit This adapter kit required for early model CF-000 Settg Fixture so it can be used with the Sunnen CK-380 as well as the current 000 Series gages. (Included with all current CF- Units.) 8