Profile Projector PH-3500

Transcription

1 Optical Measuring Profile Projector PH-3500 Catalog No. E

2 Mitutoyo introduces the PH-3515F a series of profile projectors that will meet any optical measuring or inspection challenge your shop can offer! FEATURES Heavy-duty, bench-top model with horizontal optical system. Erect image on Day-bright screen. 356mm (14") dia. protractor screen with crosshairs and staggered lines for easy alignment. Digital angle measurement to 1' or Floating-type workstage incorporates linear scales for fast, accurate measurement. Built-in XY counter. Contour illumination with halogen bulb. Surface illumination with halogen bulb. Suitable for thread pitch measurements free from blurred or distorted images when the workpiece is angled. Wide range of accessories for varied applications. 2

3 PROJECTION LENSES 5X Max. workpiece width L 10X (Standard accessory) Working distance W 20X 50X D Max. workpiece diameter whose edge line can be focused on the screen center Magnification 5X 10X 20X 50X Order No View field diameter W 160 (64) 93 (41) 40 (40) 14.6 (14.6) L D ( ): When using surface illumination WORKSTAGE (STANDARD ACCESSORY) QM-Data200 (OPTIONAL) To denote your AC line receptacle/cable add the following suffixes (e.g A). A for UL/CSA type, C for JAPAN type, D for CEE type, E for BS type, K for EK (South Korea) type, DC for CCC (China) type. Mitutoyo launches a new 2D data processing unit for optical instruments. The QM-Data200 can add new features of 2D coordinate measurement, image processing, etc. into your ordinary optical instruments to improve the QC control system. XY range X-axis (horizontal travel): 254mm (10") Y-axis (vertical travel): 152mm (6") Measuring unit Linear scale for each axis Display unit (Optional) Stage size (WxD) 450x146mm (17.72"x5.75") Swivel range ±10 (30' reading) Max. workpiece load 45kg (99 lbs.) Dovetail groove Two (Pitch= 43mm) Focusing travel 50mm (2") Optoeye 12AAE

4 SYSTEM DIAGRAM QM-Data 200 Optoeye Attachment (B) 12AAE SPECIFICATIONS Model PH-3515F Type mm inch/mm Order No Resolution 0.001mm.001"/0.001mm Projection lens 10X ( ) Magnification accuracy ±0.1% under contour illumination, ±0.15% under surface illumination Protractor Effective DIA 353mm (13.9") screen Screen material Fine-grain ground glass Reference line Staggered crosses and crosshairs Display range ±370 Resolution 1'/0.01 switchable Functions ABS/INC mode switch, zero-setting Contour Light source Halogen bulb (24V, 150W) illumination Optical system Telecentric Functions 2-step brightness switching, cooling fan, heat-absorbing filter, green filter (optional) Surface Light source Halogen bulb (24V, 150W) illumination Functions Adjustable condenser lens ( for all magnifications), cooling fan, heat-absorbing filter Power supply 100/110/120/220/240V AC (switchable), 50/60Hz Mass 155kg (341 lbs.) Standard accessories 10X projection lens set, workstage ( ), power cord, halogen bulb 24V 150W (2pcs.), machine cover (383228), user's manual * To denote your AC line voltage add the following suffixes (e.g a). A for 120V, C for 110V, D for 220V, E for 240V, K for 220V(for Korea), DC for 220V (for China) 4

5 DIMENSIONS 460 (18.1") Unit: mm (inch) 110 (4.3) 935 (36.8") 1155 (45.5") 18 (0.7") 424 (16.7") 321 (12.6") 540 (21.3") 460 (18.1") 906 (35.7") 1138 (44.8") OPTIONAL ACCESSORIES Vertical Holder Rotary Vise Center Support Riser Center Support Sets up a thin workpiece easily. V-block with Clamp Workpiece dia.: 50mm max. Workpiece dia.: 60mm max. Green Filter Increases the screen sharpness of the contour image Widens the clamping capacity of the center support to a maximum diameter of 240mm. Standard Scales Used for checking magnifying accuracy Clamps a cylindrical workpiece such as a screw. Workpiece dia.: 120mm max (50mm) (2") Overlay Chart Set Makes inspection of projected images easy. Twelve different patterns are available in a set. Reading Scales (200mm) (300mm) Designed for checking the magnified image of a standard scale (8") (12") 5

6 (6) AeNE, Printed in Japan Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this pamphlet, as well as other technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs, dimensions and weights. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive.