1722 / 1723 / 1724 DIGI-MET Indicators
|
|
|
- Alexander Simmons
- 9 years ago
- Views:
Transcription
1 1722 / 172 / 1724 DIGI-MET Indicators for static measurements IP Electronic functions Housing Ø 60 mm Replacement probe tip M 2.5 Protection class IP52 Clamping shank Ø 8 mm LCD display with 12 mm high numerals Measuring force N Accuracy according to factory standard ON/OFF switch QuickStart Electronic QuickLock Function Zero setting at any position Reversal of counting direction mm/inch conversion Individual buttons can be locked Variable data output RS 22 + Digimatic + USB PRESET Function (setting a numerical value) Measuring range Reading Error limit Ref. No. List price mm inch mm inch µm Accessories Ref. No. List price Battery, V-Lithium, CR Cable for USB incl. software Cable for RS Cable for Digimatic Cable release (12.5 mm) Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
2 1726 / 1728 DIGI-MET Indicators for static measurements IP Electronic functions Aluminium housing Hardened stainless steel spindle Outer ring (Bezel) Ø 60 mm Replacement probe tip M 2.5 Protection class IP42 Clamping shank Ø 8 mm Reading 0.01 mm Reading mm Display unit can be rotated through 280 LCD display with 11 mm high numerals Factory standard ON/OFF switch QuickStart Electronic QuickLock Function Zero setting at any position mm/inch conversion Absolute function (display can be set to zero without losing the Preset value) Tolerance function Reversal of counting direction Factor input Individual buttons can be locked Variable data output RS 22 + Digimatic + USB PRESET Function (setting a numerical value) Measuring range Reading Error limit Ref. No. List price mm inch mm total span μm partial span** μm * * * * * Reading switchable: / / / / mm ** Partial span= 25 steps by step value mm Accessories Ref. No. List price Battery, V-Lithium, CR Cable for USB incl. software Cable for RS Cable for Digimatic Cable release ( mm) = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 119
3 170 / 172 DIGI-MET Indicators for static measurements IP Electronic functions Aluminium housing Hardened stainless steel spindle Outer ring (Bezel) Ø 60 mm Replacement probe tip M 2.5 Protection class IP54 Clamping shank Ø 8 mm Display unit can be rotated through 280 LCD display with 11 mm high numerals Factory standard ON/OFF switch QuickStart Electronic QuickLock Function Zero setting at any position mm/inch conversion Absolute function (display can be set to zero without losing the Preset value) Tolerance function Reversal of counting direction Factor input Individual buttons can be locked Variable data output RS 22 + Digimatic + USB PRESET Function (setting a numerical value) Measuring range Reading Error limit Ref. No. List price mm inch mm total span μm partial span** μm * * * Reading switchable: / / / / mm ** Partial span= 25 steps by step value mm Accessories Ref. No. List price Battery, V-Lithium, CR Cable for USB incl. software Cable for RS Cable for Digimatic Cable release ( mm) Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
4 174 DIGI-MET indicators with combined analogue / digital display for static and dynamic measurements IP Electronic functions Aluminium housing Hardened stainless steel spindle Outer ring (Bezel) Ø 60 mm Replacement probe tip M 2.5 Protection class IP42 Clamping shank Ø 8 mm Display unit can be rotated through 280 LCD display with 8.5 mm high numerals Factory standard ON/OFF switch QuickStart Electronic QuickLock Function Zero setting at any position mm/inch conversion Absolute function (display can be set to zero without losing the Preset value) Tolerance function MAX/MIN function TIR (MAX-MIN) function Reversal of counting direction Factor input Individual buttons can be locked Variable data output RS 22 + Digimatic + USB PRESET Function (setting a numerical value) Measuring range Reading Error limit Ref. No. List price mm inch mm total span μm partial span** μm * * * Reading switchable: / / / / mm ** Partial span= 25 steps by step value mm Accessories Ref. No. List price Battery, V-Lithium, CR Cable for USB incl. software Cable for RS Cable for Digimatic Cable release ( mm) = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 121
5 TOL MIN/MAX ON/OFF SET TOL mm/inch PRESET START/STOP RESET SET PR ABS MarCator 1087 B 174 DIGI-MET Indicators with combined analogue / digital display for comparator gauge 1 TOL MIN/MAX ON/OFF SET TOL mm/inch 2 TOL MIN/MAX ON/OFF SET TOL mm/inch IP 42 PRESET START/STOP RESET SET PR ABS MarCator 1087 B PRESET START/STOP RESET SET PR ABS MarCator 1087 B Application Electronic functions The turning point can be determined automatically in measurements with a 2 point internal measuring device through commuting. The actual value is detected and stored by the MIN function and appears on the display. Aluminium housing Outer ring (Bezel) Ø 60 mm Replacement probe tip M 2.5 Protection class IP42 Clamping shank Ø 8 mm Display unit can be rotated through 280 LCD display with 8.5 mm high numerals Factory standard ON/OFF switch QuickStart Electronic QuickLock Function Zero setting at any position mm/inch conversion Absolute function (display can be set to zero without losing the Preset value) Tolerance function MAX/MIN function Reversal of counting direction Factor input Individual buttons can be locked Variable data output RS 22 + Digimatic + USB PRESET Function (setting a numerical value) Measuring range Reading Error limit Ref. No. List price mm inch mm total span μm partial span** * * Reading switchable: / / / / mm ** Partial span= 25 steps by step value mm Accessories Ref. No. List price Battery, V-Lithium, CR Cable for USB incl. software Cable for RS Cable for Digimatic Cable release ( mm) Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
6 0691 DIGI-MET Indicators Aluminium housing Outer ring (Bezel) Ø 60 mm Replacement probe tip M 2.5 Protection class IP51 Water and coolant resistant Clamping shank Ø 8 mm Display unit can be rotated through 270 LCD display with 11 mm high numerals Factory standard Electronic functions OPTO IP 51 ON/OFF switch Zero setting at any position mm/inch-conversion Data output RS 22 Proximity + RS 22 Power (USB-keyboard interface cable, see page 270) PRESET function (setting a numerical value) * Additional functions models Tolerances (visual indications via LEDs) MAX/MIN function TIR (MAX-MIN) function Factor input Measuring range Reading Error limit Ref. No. List price mm inch mm inch μm Reading 0.01 mm Reading mm , Reading mm, with additional functions* ** ** = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 12
7 0701 Small dial gauges with lightweight plastic housing 878 Lightweight housing made of polyamide Measuring spindle is made of stainless steel Replacement probe tip M 2.5 Clamping shank Ø 8 mm 878 Case Small dial gauge Shockproof small dial gauge Measuring range Reading Range per revolution Outer ring (Bezel) Ref. No. List price mm mm mm dia. mm Small dial gauges Metal housing Measuring spindle is made of stainless steel Replacement probe tip M 2.5 Clamping shank Ø 8 mm With a revolution counter 878 Case Small dial gauge Shockproof small dial gauge Measuring range Reading Range per revolution Outer ring (Bezel) Ref. No. List price mm mm mm dia. mm Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
8 0701 Dial gauges Measuring spindle is made of stainless steel Replacement probe tip M 2.5 Clamping shank Ø 8 mm 878 Case Measuring range Reading Range per revolution Outer ring (Bezel) Ref. No. List price mm mm mm dia. mm Dial gauge, plastic housing Dial gauge, metal housing Shockproof dial gauge, injection-moulded housing Shockproof dial gauge, metal housing Dial gauges with extended measuring range Metal housing Measuring spindle is made of stainless steel Replacement probe tip M 2.5 Clamping shank Ø 8 mm With a concentric pointer Factory standard Case Measuring range Reading Range per revolution Outer ring (Bezel) Ref. No. List price mm mm mm dia. mm = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 125
9 0704 Shockproof dial gauges Metal housing Measuring spindle is made of stainless steel Replacement probe tip M 2.5 Clamping shank Ø 8 mm Shockproof Case Measuring range Reading Range per revolution Outer ring (Bezel) Ref. No. List price mm mm mm dia. mm Revolution counter: With fine adjustment of the pointer: Concentric pointer: Factory standard Water and oil proof dial gauges IP Metal housing, water and oil proof Protection class IP67 Measuring spindle is made of stainless steel Replacement probe tip M 2.5 Clamping shank Ø 8 mm Rubber bellows Shockproof Outer ring (Bezel) can be rotated through Case Measuring range Reading Range per revolution Outer ring (Bezel) Ref. No. List price mm mm mm dia. mm Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
10 0700 Dial gauges, graduation 0.1 mm Metal housing Measuring spindle is made of stainless steel Replacement probe tip M 2.5 Clamping shank Ø 8 mm Factory standard Case Measuring range Reading Range per revolution Outer ring (Bezel) Ref. No. List price mm mm mm dia. mm Straight line revolution counte Dial gauge with concentric mm display 878 Metal housing Measuring spindle is made of stainless steel Replacement probe tip M 2.5 Clamping shank Ø 8 mm With a concentric pointer 878 Case Measuring range Reading Range per revolution Outer ring (Bezel) Ref. No. List price mm mm mm dia. mm = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 127
11 0705 Precision dial gauges Metal housing Measuring spindle is made of stainless steel Replacement probe tip M 2.5 Clamping shank Ø 8 mm With revolution counter Factory standard Case Measuring range Reading Range per revolution Outer ring (Bezel) Ref. No. List price mm mm mm dia. mm Precision shockproof dial gauge Error free, shockproof dial gauge 878 Metal housing Measuring spindle is made of stainless steel Replacement probe tip M 2.5 Clamping shank Ø 8 mm Free lift 1 mm 878 Case Measuring range Reading Free lift Outer ring (Bezel) Ref. No. List price mm mm mm dia. mm Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
12 0709 Dial gauges with reverse action plunger Metal housing Measuring spindle is made of stainless steel Replacement probe tip M 2.5 Clamping shank Ø 8 mm Factory standard Case Measuring range Reading Range per revolution Outer ring (Bezel) Ref. No. List price mm mm mm dia. mm Dial comparator gauge MICROTAST Measuring spindle is made of hardened stainless steel Longer measuring spindle Replacement probe tip M 2.5 Clamping shank Ø 8 mm Tolerance markers Shockproof Fine adjustment 879 Case Measuring range Reading Dial reading Overtravel Ref. No. List price mm mm mm = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 129
13 0710 Magnetic back For dial gauges with outer ring (Bezel) Ø 58 mm Allows dial gauges to be used without a holder or a stand Magnetic force 220 N Cannot be used in conjunction with dial gauges and or all digital gauges Ref. No. List price Lug back Ø 5 mm For retrofitting Cannot be used in conjunction with dial gauges and or any digital gauges Ref. No. List price For dial gauges with an outer ring (Bezel) dia. 40 mm For dial gauges with an outer ring (Bezel) dia. 58 mm Spindle lifting lever For dial gauges with a measuring range max. 10 mm Cannot be used in conjunction with dial gauges and or any digital gauges Ref. No. List price For dial gauges with an outer ring (Bezel) dia. 40 mm For dial gauges with an outer ring (Bezel) dia. 58 mm Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
14 0724 Angle lever attachment With Ø 8 mm mounting hole for dial gauges Clamping shank Ø 8 mm Smallest measurable hole: 6 mm Measuring span: 10 mm Measuring depth Ref. No. List price mm Extensions for dial gauges M2.5 5 Special steel Thread M 2.5 M2.5 4 L Length (L) Ref. No. List price mm For measuring spindle dia. 4 mm = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 11
15 Measuring inserts for dial gauges M2.5-6g M2.5-6g Ø4.8 Ø10 Material Ref. No. List price Special steel Carbide Material Ref. No. List price Special steel Carbide M2,5-6g Ø4.5 M2.5-6g Ø Material Ref. No. List price Special steel Carbide Material Ref. No. List price Special steel Carbide Ø4.5 M2.5-6g Ø4.5 M2.5-6g Ø1.5 Ø.5 Material Ref. No. List price Special steel Carbide Material Ref. No. List price Special steel Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
16 0710 Measuring inserts for dial gauges M2.5-6g M2.5-6g " Ø4.5 Ø4 Material Ref. No. List price Special steel ,00 Carbide ,90 Ruby ,70 Sapphire ,70 Ball Ref. No. List price dia. mm Special steel, Tolerance of the ball diameter ±1 μm M2.5-6g M2.5-6g 5 5 Ø " Ø4.5 Material Ref. No. List price Special steel Carbide Ruby Sapphire Special steel Ball Ref. No. List price dia. mm = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 1
17 0710 Measuring inserts for dial gauges Ø 5 Ø4.5 M2.5-6g M2.5-6g " 20 Ø 0.2 * with locknut Material Ref. No. List price Special steel * 6.0 Carbide * 44.0 Material Ref. No. List price Special steel M2.5-6g M2.5-6g Ø7.8 Ø " Material Ref. No. List price Special steel Material Ref. No. List price Special steel M2.5-6g M2,5-6g " Ø.5 Ø4,5 * with locknut Material Ref. No. List price Special steel * 6.90 Material Ref. No. List price Special steel Carbide Ruby Sapphire Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
18 0715 Dial test indicators Carbide tipped measuring inserts, Ø 20 mm Form A in accordance to 2270 Revolving dial -piece swallow tail guide Automatic reversal of the counting direction Measuring force 0.15 N Includes clamping shank Ø 8 mm and key for measuring inserts Case Measuring range Reading Outer ring (Bezel) Contact insert length Dial Ref. No. List price mm mm dia. mm mm ± ± ± ± ± ± Clamping shanks for dial test indicators ø12 Diameter Ref. No. List price mm 4h h ød 0715 Measuring inserts with carbide ball M2 l d Ball Length Ref. No. List price dia. mm mm Key for measuring inserts Ref. No. List price = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 15
19 0715 Universal clamp 0 Ø6 H7 Diameter Ref. No. List price mm Ød2 Ød1 60 Suitable in conjunction with holder Holder 9 Ø6 h6 b a Length Cross section Ref. No. List price mm mm x Dial depth gauges with a measuring base Measuring base is made of stainless steel, hardened Replacement probe tip M 2.5 Revolving dial Factory standard Concentric pointer Prismatic base Measuring range Reading Contact surface Range per revolution Dial gauge Ref. No. List price mm mm measuring base mm mm dia. mm x x x for dia Depth measuring base for indicators Special steel, chrome plated Mounting for indicator Ø 8 mm 16 Marked = excess length/excess weight Contact surface Ref. No. List price mm 80 x x x Marked = includes a F.O.C. calibration certificate, traceable to national standards
20 0718 Dial thickness gauges Frame is made of an aluminium alloy Factory standard When ordering please specify the gauge form Ø 5 Ø10 Ø10 Ø20 Ø0 Ø6,5 Metal sheets, etc. Hard leather, plywood, fibreboard Soft leather, cardboard, paper, foils Rubber fabrics, rubber sheets, felt, soft materials Hard materials Measuring range Reading Type of contact points Frame depth Ref. No. List price mm mm selectable mm / 2 / / With a lifting device and stand, range per revolution 10 mm With a lifting wheel and concentric pointers, range per revolution 1 mm / 2 / / / 2 / / With a lifting device, range per revolution 1 mm = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 17
21 0720 Dial thickness gauges With a lifting device Factory standard Frame is made of an aluminium alloy Revolution counter Ref. No Tube wall thickness dial gauge with 2 exchangeable probes - with bund radius = 1 mm, dia. 8 mm - cylindrical dia. 6 mm Ref. No Foil thickness gauge, measuring insert dia. 6.5 mm, flat, thermally insulated Measuring range Reading Range per revolution Frame depth Ref. No. List price mm mm mm mm Tube wall thickness dial gauge Foil thickness dial gauge Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
22 0721 Internal caliper gauges IP 65 Protection class IP A B C D Measuring range Reading Measuring depth For grooves Ref. No. List price mm mm mm max. depth min. width Contact point type "A", cutting (chisel) radius 0.1 mm Contact point type "B", carbide ball Ø 0.6 mm Contact point type "B", carbide ball Ø 1.0 mm Contact point type "C", carbide ball Ø 1.0 mm Contact point type "D", carbide ball Ø 1.0 mm = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 19
23 0721 External caliper gauges IP 65 Protection class IP H I K L P Measuring range Reading Measuring depth Contact point length Ref. No. List price mm mm moving fixed Contact point type "H", cutting chisel radius 0.4 mm Contact point type "I", fixed arm, carbide ball Ø 1.5 mm, moving arm, cutting (chisel) radius R = 0.4 mm Contact point type "K", carbide ball Ø 1.5 mm Contact point type "L", carbide ball Ø 1.5 mm, 1 straight probe arm Contact point type "P", carbide ball Ø 5.0 mm Contact point type "K", carbide ball Ø.0 mm Contact point type "L", carbide ball Ø.0 mm, 1 straight probe arm Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
24 0721 Digital internal caliper gauges IP 67 Protection class IP67 Electronic functions ON/OFF switch mm/inch conversion Absolute/relative measurement Tolerance function Red/green indication (LED) for tolerance measurements Data output B C D Measuring range Reading Measuring depth For grooves Ref. No. List price mm mm max. depth min. width Contact point type "B", carbide ball dia 0.6 mm Contact point type "C", carbide ball Ø 1.0 mm Contact point type "C", carbide ball Ø 1. mm Contact point type "D", carbide ball Ø 2.0 mm Contact point type "C", carbide ball Ø 1.5 mm = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 141
25 0721 Digital external caliper gauges IP Electronic functions K L ON/OFF switch mm/inch conversion Absolute/Relative measurement Tolerance function Red/green-indication (LED) for tolerance measurements Data output Protection class IP67 Measuring range Reading Measuring depth Contact point length Ref. No. List price mm mm mm moving fixed Contact point type "K", carbide ball Ø 1.5 mm Contact point type "K", carbide ball Ø.0 mm Contact point type "L", carbide ball Ø.0 mm, straight lower probe arm Contact point type "K", carbide ball Ø.0 mm Accessories for caliper gauges Data interface (adapter and cable) for USB* Data interface (adapter and cable) for Digimatic* Ref. No. List price * When placing an order, please specify the reference no. and the type of the caliper gauge. 142 Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
26 0727 Set of DIGI-MET 2 point internal micrometers IP 65 Proxi 878 Switchable increment value 0.01/0.001/ mm Protection class IP65 LCD-display 6 mm Hard chrome plated measuring head For fast and accurate measurements of small holes Compact design in ballpoint pen and can be used everywhere for mobile use Setting with setting ring Electronic functions ON/OFF switch mm/inch conversion Hold function Data output RS 22 Proximity PRESET Function (setting a numerical value) Wooden case Measuring range Measuring depth Repeatability No. of Setting ring Ref. No. List price mm mm µm probes dia. mm / 1.1 / 1.2 / 1. / , / 2 / , / 2.75 / /.25 /.5 /.75 / , / 4.5 / 5 / 5.5 / , Depth stops for 0727 Measuring range Ref. No. List price mm Accessories Ref. No. List price Battery, 1.5V type USB-keyboard interface cable RS 22 Proximity = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 14
27 0726 Internal precison bore gauges, set for smaller bores 2 point comparator measuring instrument with split probe + measuring pin Excludes a dial gauge Without a setting ring Mounting hole Ø 8 mm Ideal in conjunction with dial gauges or dial comparator gauges Wooden case Nominal meas. range Effective meas. range Measuring depth Number of probes Ref. No. List price mm mm mm Hardened chrome finished probe , Carbide tipped probe , , , Accessories for 0726 For measuring range Ref. No. List price mm Clamp with depth stop Angle probe Set of setting rings For measuring range Set Ref. No. List price mm pieces Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
28 0728 Internal precison bore gauges for large and deep bores 2 point comparator measuring instrument to determine the reversal point Centering plate Mounting hole Ø 8 mm Ideal in conjunction with dial gauges or dial comparator gauges Excludes dial gauge Wooden case Measuring Measuring Repeatability Number of Measuring discs Ref. No. List price range mm depth mm µm measuring pins Fixed measuring pins, hardened special steel, interchangeable contact pins carbide tipped , Fixed measuring pins and interchangeable contact pins, both pins are carbide tipped , Setting device for internal precison bore gauges Setting device for accurate adjustment of internal precision bore gauges to the required nominal dimension, with gauge blocks The setting jaws are made of carbide and are lapped to gauge block quality Setting device can be used in both, the vertical and horizontal measuring axis Supplied with: Stand (excludes gauge blocks) Wooden case For measuring range Accuracy Ref. No. List price mm µm , , , = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 145
29 075 Crankshaft gauges With dial gauge To be positioned between 2 crank arms Centre punch is not required Horizontal position of the dial gauge is assured with a plumb bob Wooden case Measuring range Reading Ref. No. List price mm mm Length measuring instruments for external incisions Ideal for serial measurements of incision diameters on turned parts Narrow measuring faces made of hardened steel High precision ball guide of the transmission bolt Round support table, height adjustable, clamped for setting the exact measuring position Heavy stand Base unit in the angular grid 0 /0 /60 /90 Titled and clamped Support for indicators with shaft Ø 8 mm Display devices: analogue or digital indicators Versions with other measuring inserts are available upon request Without digital indicator (indicators see pages 118 and following) Measuring range Support table-ø Max. distance "h" Ref. No. List price mm mm mm , Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
30 077 Length measuring instrument for internal incisions Ideal for serial measurements of internal incision diameters High precision probe guidance with a constant measuring force Adjust the height with a gauge block Set the diameter with a setting ring Measuring table plate size 110 x 7 mm Mounting hole Ø 8 mm Ideal for analogue and digital dial gauges as well as electronic probes Optional angled probes made of hardened steel Without probe Internal diameter Ref. No. List price mm Measuring probes (pair) made of hardened steel for 077 m d2 n d1 For bore dia. "d1" Max. incision dia. "d2" Min. groove width "m" Adjustable meas. height "n" Ref. No. List price mm mm Ø mm mm 4-28 d1 + 2 mm d1 + 4 mm d1 + 2 mm d1 + 4 mm = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 147
31 079 Universal comparator gauge Basic comparator gauge consists of: To determine internal and external diameters of recesses, grooves and undercuts in comparision measurement Measurement procedure: The part to be measured is determined at the point of reversal between a fixed and moveable measuring insert Select either an analogue or digitial indicator to show your measuring results Sturdy construction Simple to set up and easy to operate Large range of application Ideal for serial measurements Optional: Special supporting table is interchangeable Internal measurements: mm External measurements: mm Repeatability: 2 µm Mounting hole for a dial gauge: Ø 8 mm Supplied with: Pair of measuring inserts and , holder for measuring inserts and Aluminium case Dimensions Ref. No. List price mm 150 x 150 x , Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
32 079 Pairs of measuring inserts Item Ref. No. List price Probe pair Probe pair Probe pair Probe holder * Probe holder * Probe holder * Probe pair Small probe pair ** Holder pair for * For further information regarding probes Ref. No to see Ref. No starting on page 11 ** Required holder No Application examples: & * & * * & * = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 149
33 079 Holder for measuring inserts short / long Ref. No. List price Holder, short Holder, long Large supporting table Dimensions Internal measurement External measurement Ref. No. List price mm mm mm 269 x Stop pieces Item Ref. No. List price Stop cuboid Stop disc Stop stepped cuboid Application examples: Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
34 0741 Universal comparator gauge UHRTAST Comparator gauge for external and internal measurements for checking workpieces and setting of machines Versatile in use due to wide range of probes and inserts Measuring range up to 2000 mm by using optional extensions Without indicator The direction of the measuring force can be switched, the gauge can be used for external and internal measurements The adjustment can be conducted with a setting gauge, a combination of gauge blocks, a setting ring or a micrometer The measuring range of the moveable measuring arm is 18 mm Wooden case Product video = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 151
35 0741 Basic comparator gauge Comparator gauge for external and internal measurements for checking workpieces and setting of machines Versatile in use due to wide range of probes and inserts Measuring range up to 2000 mm by using optional extensions Without indicator The direction of the measuring force can be switched, the gauge can be used for external and internal measurements The adjustment can be conducted with a setting gauge, a combination of gauge blocks, a setting ring or a micrometer The measuring range of the moveable measuring arm is 18 mm Wooden case Internal measurement External measurement Ref. No. List price mm mm , Extensions Length Ref. No. List price mm Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
36 Pair of probe mounting block Ref. No. List price Pairs of ball measuring inserts Length Ref. No. List price mm Pair of cylindrical measuring inserts Length Ref. No. List price mm Pair of offset measuring inserts Ref. No. List price = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 15
37 Pair of measuring inserts with discs Ref. No. List price Pair of shoulder measuring inserts ø 5 4 For measuring external centre points Ref. No. List price Pair of shoulder measuring inserts For measuring internal centre points Ref. No. List price Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
38 Pairs of measuring arms Measuring arms are reversible for internal and external measurement Mounting bores:.5 and 5 mm Length Ref. No. List price mm Pair of depth stop attachment for measuring arms Ref. No. List price Pair of adapters 5 mm for measuring inserts M2.5 All measuring inserts for dial gauges with M2.5 can be used (measuring inserts please refer to pages 12-14) Ref. No. List price = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 155
39 Pair of adapters for thread measuring inserts (pair) ø 5 Adapter for thread measuring inserts with a long shank Measuring inserts that have a short shank, the adapter is not required ø.5 Ref. No. List price Pairs of thread measuring inserts for metric internal thread Thread measuring inserts for internal thread, metric pitch in pairs Pitch Ref. No. List price mm Pairs of thread measuring inserts for metric external thread Measuring table Thread measuring inserts for external thread, metric pitch in pairs Pitch Ref. No. List price mm Additional inserts for whitworth and ISO-trapezoidal threads, see Ref. No on page 101 Consists of a support table dia. =180 mm, holder for probe, supports Ref. No. List price Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
40 0750 Universal indicator stands with magnetic base Chrome finished columns Base with V-groove Magnet with ON/OFF switch Mounting clamp: Ø 8 mm for indicators Integrated fine adjustment Height of column Reach Column / Arm Magnetic base Magnetic force Ref. No. List price mm mm dia. mm L x B x H mm N /12 60 x 50 x /16 60 x 50 x = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 157
41 0750 Universal indicator stands with magnetic base and combi clamp Chrome plated columns Base with V-groove Magnet with ON/OFF switch Combi clamp: Ø 8 mm for dial gauges, swallow tail clamp for dial test indicators Integrated fine adjustment Without indicator Crosshead clamp Height of column Reach Column / Arm Magnetic base Magnetic force Ref. No. List price mm mm Ø mm L x B x H mm N /16 70 x 46 x /16 75 x 60 x Accessories Ref. No. List price Wooden case for Pillar with transverse arm and fine adjustment For ref. Ref. No. List price Magnetic base Thread Dimensions Magnetic force Ref. No. List price L x W x H N M10 70 x 46 x M12 75 x 60 x Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
42 0752 Magnetic indicator stands with central lock Column/Arm: steel, chrome finished aluminium, -anodized Switch magnetic base with V-groove Central magnetic clamping system Combi clamp: Ø 8 mm for dial gauges, swallow tail clamp for dial test indicators Integrated fine adjustment Max height Radius Column / Arm Magnetic base Magnetic force Ref. No. List price mm mm dia. mm L x W x H mm N x 46 x x 46 x Universal magnetic holder Magnetic base with V-groove With mounting hole Ø 8 mm Three-sided magnet Max. height Support face Magnetic force Ref. No. List price mm mm N x = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 159
43 0751 Magnetic indicator stands with flexible arm With articulated (flexible) arm Eccentric clamp by lever Switch magnetic base, Fixed column With fine adjustment Flexible transverse arm Switch magnetic base, Height of column Base Magnetic force Ref. No. List price mm L x W x H mm N Heavy duty stand x 45 x Clamping via. the star knob screw x 45 x Universal magnetic holder Cast iron base with two magnets on the bottom of the holder With mounting hole Ø 8 mm Max. height Support face Magnetic force Ref. No. List price mm mm N x Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
44 0770 Compact measuring stands Cast base Chrome finished columns Hardened steel table With dust grooves (Ref. No non-stop plane) With mounting hole for dial gauges Ø 8 mm Measuring height Reach Column Transverse arm Table surface Ref. No. List price mm mm dia. mm dia. mm mm With fixed arm Ø x With adjustable transverse arm x x = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 161
45 0772 Measuring stand Cast base Hardened steel table With dust grooves With a threaded column and an adjustable transverse arm With mounting hole for dial gauges Ø 8 mm Measuring height Reach Column Transverse arm Table surface Ref. No. List price mm mm dia. mm dia. mm mm x Precision measuring stands Base made of hard stone Base plate accuracy according to With a threaded column and chrome plated transverse arm With adjustable transverse arm With mounting hole for dial gauges Ø 8 mm Vertical adjustment by threaded spindle with setting ring Meas. height Reach Column Transverse arm Table surface Ref. No. List price mm mm dia. mm dia. mm mm x x , Anti-twist (secured against rotation) transverse arm x , Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
46 076 Universal measuring support Column and transverse arm are chrome finished Heavy base plate with prismatic base and T-groove Column is moving and can be clamped in the T-groove Mounting clamp: Ø 8 mm for dial gauges, swallow tail clamp for dial test indicators Fine adjustment Height of column Base dimensions Transverse arm Ref. No. List price mm L x W x H mm dia. mm x 60 x 5 16/ Bench centres À Á Finely ground surface, flatness tolerance according to With two adjustable tailstocks Left tailstock with fixed centre Right tailstock with retractable spring mounted centre, free lift appr. 10 mm Tailstocks can be clamped via an eccentric clamp Tailstocks height 75 mm with integrated V-groove support Á Quick-clamping device by clamping lever À With T-groove and support column With mounting hole for dial gauges Ø 8 mm Height of centres Max. work load Width between centres Centre dia. Width of T grooves Base Ref. No. List price mm per tailstock (kg) mm mm mm mm x x x * x * x , x ,04.00 * With integrated V-groove support on the tailstocks = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 16
47 0780 Bench centres for heavy workpieces À Finely ground surface, flatness tolerance according to With two adjustable tailstocks Left tailstock with fixed centre Right heavy tailstock with moveable, spring mounted centre, free lift appr. 10 mm Tighten by hand crank À Tailstocks can be clamped via an eccentric clamp Base made of cast iron with T-groove Measuring stand with mounting hole for dial gauges Ø 8 mm Height of centres Max. work load Width between centres Centre dia. Width of T grooves Base Ref. No. List price mm per tailstock (kg) mm mm mm mm x , x , Pair of v-support inserts For height of centres V-support Ref. No. List price mm dia. mm 50/ These v-support inserts replace the pointed inserts in the tailstocks Replacement support column For height of centres Height of column For width of T grooves Ref. No. List price mm mm mm 50/ Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
48 Left tailstocks with a rotating collet chuck Height of For width of T-grooves Collet chuck Ref. No. List price centres mm mm mm F F Collet chucks F10 from 1-7 mm are available upon request F * Collet chucks F14 from 1-10 mm are available upon request* Pair of replacement tailstocks for 0780 As included with the basic bench centre mm with V-groove support For heavy workpieces, height of centres 100 mm and 150 mm up to a single load of 40 kg on request Pair of V-groove supports for 0780 Height of For width of T-grooves Ref. No. List price centres mm mm Application For workpieces without centering Functional test through applying on e.g. plain lateral surface Recognition of form errors Are used instead of the tailstocks on the base V-groove surfaces are hardened, replaceable Height* For width of T-grooves Surface Ref. No. List price mm mm dia. mm * based on the center of an axis of a shaft Ø 10 mm Pair of roller supports for 0780 Application For workpieces without centering Functional test through applying on e.g. plain lateral surface Recognition of form errors Are used in place of the tailstocks on the base Runout tolerance of the rollers: mm Height* Width of T grooves Surface Ref. No. List price mm mm dia. mm * based on the center of an axis of a shaft Ø 10 mm = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 165
49 078 Bench centre Dark granite work bench Flatness tolerance in accordance to Right tailstock with retractable spring mounted centre (quick adjustment lever) Left tailstock with fixed centre Tailstocks can be adjusted via an eccentric clamp Wooden box Supplied with: - Work bench - Support post - 1 pair of tailstocks with pointed alignment centre 60 MK 2 Height of centres Max. work load per tailstock Width between centres Width of T-grooves Base Ref. No. List price mm kg mm mm mm x 180 x , For centre height Width of T-grooves Ref. No. List price mm mm Pair of tailstocks ,08.00 Support post Pointed alignment centre, mount MK Pair of roller supports Height* For width of Surface Ref. No. List price mm T-grooves mm dia. mm * based on the centre of an axis of a shaft Ø 2 mm 166 Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
50 0784 Concentricity measuring gauge with disc supports H H12 M6 15 on both sides 57 Centerless concentricity measuring instrument High accuracy discs are being mounted on bearings; free of play Discs can be slid to either side on the base One sliding disc can be adjusted up to 0 mm for diametral compensation Includes the support post, excludes a dial gauge Concentricity accuracy 5 µm Load capacity max. 50 kg (25 kg per tailstock) Wooden box Max. distance between discs Max. workpiece Discs Ref. No. List price mm dia. mm dia. mm , Freimaßtoleranz ISO 2768 m Maßstab: 1:2.5 Werkstoff: Datum Name Benennung = QuickLock Bearb. = QuickStart R. Wöppel IP = Waterproof acc. IP = Data output = Gepr. 167
51 0788 Shaft measuring instrument application as a bench centre For rapid measurement of distances, shoulders, taper, roundness, etc. Vertical and horizontal alignment Vertical base with hardened adjustment support surfaces Measuring beam is made of hardened steel Load capacity max. 20 kg Not supplied with a height gauge Application Height of centres Width between centres Width of T-grooves Base Ref. No. List price mm mm mm mm H7 200 x , Accessories Ref. No. List price Measuring stand with guideways Marked = excess length/excess weight Marked = includes a F.O.C. calibration certificate, traceable to national standards
52 0788 Shaft measuring instrument lightweight application as a bench centre For rapid measurement of distances, shoulders, taper, roundness, etc. Vertical and horizontal alignment Vertical base with hardened adjustment support surfaces Measuring beam is made of hard anodised aluminium profile Aluminium tailstocks Load capacity max. 15 kg Not supplied with a height gauge Application Height of centres Width between centres Width of T-grooves Base Ref. No. List price mm mm mm mm x Accessories Ref. No. List price Measuring stand with holder Measuring stand with guideways = QuickLock = QuickStart IP = Waterproof acc. IP = Data output = 169
53 NOT SEARCHING, BUT FING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide unusual solutions for tasks. This is why the term ring gauges does not refer to the jewellery worn by our trainees, but rather it is an integral part of a seamless range including everything from marking brackets to callipers. If there is something you cannot find and we are able to help, we will make it for you, even as a single piece. This attention to detail is displayed with exceptional precision: With our laser scaling system, we achieve a precision of < mm on a length of 1000 mm. Whether you need a considerable leap forward in technology or a wide or deep range of products, you will have no trouble finding what you need from us, least of all when it is a matter of maximum accuracy.
NOT SEARCHING, BUT FINDING
NOT SEARCHING, BUT FINDING We carefully ensure that our wide and extensive range provides a good assortment so that you feel in good hands, even if you are looking for portable measurement devices to provide
Thickness Gauges. convex R 15 or R 40, flat 10 mm Ø, spherical
Thickness Gauges Technical Data for Metric Thickness Gauges Page Model Lifting Contact points Contact points mm mm mm device standard available on request 130 K 15 0.1 10 15 no 6.35 mm Ø flat Ø flat, 130
EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY...
EVEN FOR SMALL QUANTITIES WE GET STARTED RIGHT AWAY... Because we produce in-house, so we don t have far to go. Our decisions are not based on when and who can do what in Asia; instead, we look at what
DMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements
DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,
DIGI-MET ELECTRONIC INDICATORS
DIGI-MET ELECTRONIC INDICATORS Featuring Direct RS232C Output And Swiss SYLVAC Electronics. A sophisticated non-contact linear measuring system... can be connected to any computer or printer with no interface
YUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
MaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
OPTICAL MEASURING MACHINES
OPTICAL MEASURIN MACHINES SYLVAC SCAN Dedicated to the fast and contactless measuring of cylindrical parts, our new SCAN machines are based on the principle of the scanner. This technique allows to reproduce
Straightness, Angle and Inclination Measurement
www.tesagroup.com J-1 INCLINOMETERS AND PRECISION LEVELS Irrespective of whether they are spirit or electronic inclinometers, all precision levels are based on the same perfectly reliable reference but
Accessories for Dial Indicators and Dial Comparators
Chapter - page Test Indicators Testing of Test Indicators, Dial Indicators and Dial Comparators 3-2 Test Indicators Puppitast 3-3 Accessories for Test Indicators 3-5 Dial Indicators Mechanical Dial Indicators
RAPID DIAL TEST INDICATORS
RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot
Fixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
3 3.4 Measuring tapes Spirit levels Levelling and laser technology
0 Vernier callipers Depth gauges 1 Outside and inside micrometers 2 Dial gauges / callipers Vblocks, measuring tables Centring devices Page 526 540 Page 541 554 Page 555 577 Height gauges, scribers Engineers
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 [email protected]. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
MEASURING TOOLS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOOL MASTER ACCU CENTER. ALIGNMENT TOOL for ATC arm DYNA FORCE
MEASURING TOOS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOO MASTER ACCU CENTER AIGNMENT TOO for ATC arm DYNA FORCE TOO PRESETTER type TPS EVE MASTER 3 3 4 5 5 6 7 8 9 MEASURING
MEASURING MACHINES. Pratt & Whitney METROLOGY LABORATORY. Measurement Systems, Inc.
METROLOGY LABORATORY Pratt & Whitney Measurement s, Inc. METROLOGY LABORATORY The Standard of Accuracy Pratt & Whitney Metrology Laboratory Machines are the standard of accuracy to which all other gages
ENGLISH FORK GUIDE 2013
FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,
DIGITAL INDICATORS S_DIAL
DIGITL IDICTORS S_DIL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. sensor replaces the gears. The analogic display is transformed into
Precision Vise Combinations
Precision Vise Combinations PanaVise vises and work holding tools have hundreds of uses limited only by your imagination! Each vise allows the head to Tilt, Turn & Rotate and position your work anywhere
DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
TL-Series Sub-Spindle Operator s Addendum
3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
Industrial magnetic products and tools
Industrial magnetic products and tools M Products and tools for industrial applications akker Magnetics, established in 1971, is a leading producer of magnetic products and industrial systems based on
Mitutoyo General Catalog
Mitutoyo General Catalog Micrometer List of products Move to other products Digimatic Micrometer SERIES 293 Quickmike SERIES 293, 369, 422 Digimatic Micrometers SERIES 293 1 2 SPC Caliper 3 4 Depth gage
ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
Advantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
Pump Skid Fabrication for Magnetic Coupling. Rick Soltis Chief Mechanic City of Bedford
Pump Skid Fabrication for Magnetic Coupling Rick Soltis Chief Mechanic City of Bedford Contents Magnetic Couplings What They Are, How They Work, Where They re Used Fabrication and Manufacturing of Pump
MarStand. Indicator Stands Comparator Stands
MarStand. Indicator Stands Comparator Stands Indicator Stand 815 GN 6 2 Indicator Stand 2400 6 2 Indicator Stand 815 MA 6 3 Indicator Stand 815 MB 6 3 Indicator Stand 815 MG 6 4 Indicator Stand 815 P 6
Speed-Mat Rectangle Cutter
Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.
SCHMIDT ManualPress 300 Series Manual Presses with Process Monitoring
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO- compatible documentation of the results are becoming the major factors for small and
Tubular connection elements
KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Tubular connection elements 429 KIRÁY TRING KFT H-1151 udapest Mogyoród útja 12 14tel: 061307-3801 Technical information on the tubular
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
Mechanical and electronic length measuring instruments for internal and external measurements
echanical and electronic length measuring instruments for internal and external measurements Precision and continuity Features Contents ver since its foundation in 1883 Kroeplin have been involved in development
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD. FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.
ONE OF THE SMALLEST SNAP-ACTION SWITCHES IN THE WORLD SWITCHES FEATURES Superminiature type, light-weight snap action switch PC board terminal type (0.2g) Solder terminal type with mounting holes (0.3g)
Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center
Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale
Easy Machining Center Setup
White Paper Document No. MWA-072-EN_01_1404 April 2014 Easy Machining Center Setup Using FANUC s Direct Input of Workpiece Origin Setting Measured and Tool Length Measurement features to easily establish
Resharpening Companion
Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace
SHAFT ALIGNMENT. Quick, simple and effective! PC SOFTWARE INCLUDED PRINTER CONNECTION EXPANDABLE MEASUREMENT VALUE FILTER COMPENSATION THERMAL GROWTH
D505 D525 SHAFT ALIGNMENT Quick, simple and effective! PC SOFTWARE INCLUDED PRINTER CONNECTION EXPANDABLE COMPENSATION THERMAL GROWTH TOLERANCE CHECK MEASUREMENT VALUE FILTER 40 MINIMUM ROTATION FOR ALL
PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842
l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load
DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
The Bonelle Tool and Cutter Grinder
The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently
Drive shaft, servicing
Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,
Lathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
Pipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
OD 1401 9 PRECISION MEASURING INSTRUMENTS
SUBCOURSE EDITION OD 1401 9 PRECISION MEASURING INSTRUMENTS PRECISION MEASURING INSTRUMENTS SUBCOURSE OD1401 EDITION 9 Unites States Army Combined Arms Support Command Fort Lee, VA 23801-1809 5 CREDIT
indexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
The "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com Alan@HobbitEngineering.
The "DAVID" Steam Engine By Alan Marconett Hobbit Engineering HTTP://WWW.HobbitEngineering.com [email protected] (c) 2/20/03 The David steam engine is a simple oscillating steam engine, many plans
PowerLine Magnetic-Laser Pulley Alignment System Instructions
MONARCH INSTRUMENT 15 COLUMBIA DRIVE AMHERST, NEW HAMPSHIRE 03031 PHONE: 603-883-3390 FAX: 603-886-3300 E-mail: [email protected] Web site: www.monarchinstrument.com PowerLine Magnetic-Laser
Technical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54
Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This
DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
Sense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
Common Mechanical Engineering Terms
Common Mechanical Engineering Terms Ball and Detent (n) A simple mechanical arrangement used to hold a moving part in a temporarily fixed position relative to another part. The ball slides within a bored
Milling and Machining Center Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
Rebuild Instructions for 70001 and 70010 Transmission
Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before
The Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
EJOT Spiralform. The thread formers for metal. EJOT The Quality Connection
EJOT Spiralform The thread formers for metal EJOT The Quality Connection Imprint Editor: EJOT GmbH & Co. KG Industrial Fasteners Division D 57319 Bad Berleburg Layout and Realisation: EJOT GmbH & Co. KG
Front axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
ACCESSORIES FOR TURNING
ACCESSORIES FOR TURNING Accessories for turning D140 D180 D210 D240 D250 D280 D320 D330 D360 D420 D460 D560 Plane clamping disk Ø 170 mm 344 0295 Plane clamping disk Ø 200 mm 344 0352 Plane clamping disk
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
Think precision, Think HSS REAMING
Think precision, Think HSS REAMING SUMMARY REAMING TOOLS 2 Zoom on a reamer 3 Which HSS for maximum efficiency? 4 Coatings for the best performance 5 Vocabulary 6 Choose the right design 7 Types of bevel
Mahrlights. only j 199,-- As starter set with wireless receiver and software. MarCal. Digital Caliper 16 EWRi with integrated wireless interface
- + Mahrlights promotion s valid until 31 December 2014 MarCal. Digital Caliper 16 EWRi with integrated wireless interface As starter set with wireless receiver and software only j 199,-- - 2 MarCal. Digital
L I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
Series 6000 Torque measured metal bellow coupling
Properties Free of float metal bellow coupling with integrated torque measurement Non-contact measurement system, high robustness High torsional stiffness Limited torque of inertia Performance Measurement
Railtrac 1000. A unique, flexible, multi-purpose system for welding and cutting. G lobal solutions for local customers everywhere
1000 A unique, flexible, multi-purpose system for welding and cutting. G lobal solutions for local customers everywhere 1 SAB Flexible answer to stiff requirements is a system of components that can be
COMPACT. Drilling COMPACT
COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.
CYMAQ Marking System AS200 + DS7050 N-14
CYMAQ Marking System AS200 + DS7050 N-14 Serial Number: 13716 CYMAQ www.cymaq.com INDEX 1. PRESENTATION AND GENERAL POINTS 1.1. General Points 1.2. Identification plate 2. MACHINE CHARACTERISTICS 2.1.
Toolmaster TM250. Tool Presetters. Quick tool changes result in measurable success. Simple, rapid, accurate
Toolmaster TM250 Tool Presetters Quick tool changes result in measurable success Simple, rapid, accurate The Toolmaster 250 optimizes tool presetting through its ideal combination of functional performance,
Penetration. www.koehlerinstrument.com. www.koehlerinstrument.com. Test Methods
Test Methods Penetration of Bituminous Materials ASTM D5; IP 49; DIN 52010 Cone Penetration of Lubricating Grease ASTM D217; IP 50; ISO 2137; DIN 51804; FTM 791-311, FTM 791-313 Cone Penetration of Petrolatum
TechCut 4 Precision Low Speed Saw
Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction
Rotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
PowerLine Magnetic-Laser Sheave Alignment System Instructions
PowerLine Magnetic-Laser Sheave Alignment System Instructions The PowerLine Magnetic-Laser Sheave Alignment System laser aligns belts, pulleys, sheaves, sprockets, gear trains, rollers, platforms, conveyors,
FACTORY INSTALLED OPTIONS:
Myford MG 12 M MG 12 ME Manually operated cylindrical grinding machine - capacity 5in x 12in - providing hand operated table traverse, hand operated wheelhead travel, table swivels 7 degrees either way,
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
B098N USERS: MACHINE MANUFACTURERS DRAUGHTSMEN OPERATORS MAINTENANCE WORKERS ANY OTHERS
INSTRUCTION MANUAL TRAVELLING BEAM DEVICE MANUAL CODE B098N USERS: MACHINE MANUFACTURERS DRAUGHTSMEN OPERATORS MAINTENANCE WORKERS ANY OTHERS REV. DESCRIZIONE REDATTO/GESTITO APPROVATO COD. IDENT. PAGINE
mechanics PP-Profiles Panel Profiles PT-Profiles T-Groove Plates RE-Profiles Rectangular Profiles PU-Profiles Universal Profiles
Overview PP-Profiles Panel Profiles PP 50 PP 100 PP 150 PP 200 PP 0 B 4 PT-Profiles T-Groove Plates B 5 PT PT 50 RE-Profiles Rectangular Profiles B 6 RE 15 RE 30 RE40 RE65 PU-Profiles Universal Profiles
SAMSUNG Machine Tools PL60 CNC TURNING CENTER
SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 45 degree slant
Driven Toolholders for SAUTER Turrets
Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets
Manual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
Laserlyte-Flex Alignment System
Laserlyte-Flex Alignment System LaserLyte-Flex The LaserLyte-Flex Alignment System is a unique, interchangeable, low cost plug and play laser system. Designed specifically for aligning and positioning
Electronic Length Measuring Equipment
Electronic Length Equipment www.tesagroup.com O-1 Electronic Length Equipment TESA inductive probes and electronic equipment +U Lf TESA probes: At the cutting edge of technology TESA develops, manufactures
E420 SHAFT ALIGNMENT. Entry level measurement and alignment system for rotating machines BUILT-IN WIRELESS UNITS LARGE COLOUR DISPLAY QUICK START
E420 BUILT-IN WIRELESS UNITS QUICK START 2 40 MIN. ROTATION LARGE COLOUR DISPLAY SHAT ALIGNMENT Entry level measurement and alignment system for rotating machines ENTRY LEVEL REDEINED! SETTING A NEW STANDARD
TRIMMING UNIT/DIAMOND MACHINE TST.13
TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.
Field Application Note
Field Application Note Reverse Dial Indicator Alignment RDIA Mis-alignment can be the most usual cause for unacceptable operation and high vibration levels. New facilities or new equipment installations
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
No. 57 Receiver Sight No. 57 SML Receiver Sight No. 66 Receiver Sight
No. 57 Receiver Sight No. 57 SML Receiver Sight No. 66 Receiver Sight MOUNTING AND ADJUSTING MOUNTING LYMAN NO 57 RECEIVER SIGHT The No. 57 Sight is designed primarily for rifles with round receivers.
Slide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
FAG tools for mechanical mounting and dismounting of rolling bearings. Technical Product Information
FAG tools for mechanical mounting and dismounting of rolling bearings Technical Product Information Contents Mechanical mounting and dismounting of rolling bearings 2 Tools for mounting 4 Mounting tool
LEEB HARDNESS TESTER TH130/132/134
LEEB HARDNESS TESTER TH130/132/134 Impact size, easy operation Wide measuring range in HLD, direct display of converted hardness values in, HRB, HRC,HRA,, HS High applicability, can be used for hardness
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty
Oceanscience Cable Chimp II Cableway ROV System User Guide and Warranty Page 1 Table of Contents Introduction Page 3 Overview Page 3 Setup and Operation Page 5 Remote Control Page 6 Power Management Page
New in the PFERD Product Line 204
COMBICLICK Fibre Discs COMBICLICK fibre discs Silicon carbide SiC D The silicon carbide SiC type is suitable for working on aluminium, copper, bronze, titanium, high-alloy steels and fibre reinforced plastics.
413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS: