MMSZ4xxxTG Series, SZMMSZ4xxxTG Series Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices provide a convenient alternative to the leadless 34 package style. Features 5 mw Rating on FR 4 or FR 5 Board Wide Zener Reverse Voltage Range.8 V to 43 V Package Designed for Optimal Automated Board Assembly Small Package Size for High Density Applications ESD Rating of Class 3 (> 6 kv) per Human Body Model SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC Q Qualified and PPAP Capable These Devices are Pb Free and are RoHS Compliant* Mechanical Characteristics: CASE: Void-free, transfer-molded, thermosetting plastic case FINISH: Corrosion resistant finish, easily solderable MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 6 C for Seconds POLARITY: Cathode indicated by polarity band FLAMMABILITY RATING: UL 94 V MAXIMUM RATINGS Rating Symbol Max Units Total Power Dissipation on FR 5 Board, (Note ) @ T L = 75 C Derated above 75 C Thermal Resistance, (Note ) Junction to Ambient Thermal Resistance, (Note ) Junction to Lead P D 5 6.7 R JA 34 R JL 5 Junction and Storage Temperature Range T J, T stg 55 to +5 mw mw/ C C/W C/W Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.. FR 5 = 3.5 X.5 inches, using the minimum recommended footprint.. Thermal Resistance measurement obtained via infrared Scan Method. *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. C Cathode SOD 3 CASE 45 STYLE Anode MARKING DIAGRAM ORDERING INFORMATION Device Package Shipping MMSZ4xxxTG MMSZ4xxxT3G xx = Device Code (Refer to page 3) M = Date Code = Pb Free Package (Note: Microdot may be in either location) SZMMSZ4xxxTG SZMMSZ4xxxT3G xx M SOD 3 SOD 3 SOD 3 SOD 3 3, / 3, /, /, / For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8/D. DEVICE MARKING INFORMATION See specific marking information in the device marking column of the Electrical Characteristics table on page 3 of this data sheet. Semiconductor Components Industries, LLC, 3 November, 3 Rev. Publication Order Number: MMSZ4678T/D
MMSZ4xxxTG Series, SZMMSZ4xxxTG Series ELECTRICAL CHARACTERISTICS (T A = 5 C unless otherwise noted, V F =.9 V Max. @ I F = ma) Symbol Parameter I F I V Z Reverse Zener Voltage @ I ZT I ZT Reverse Current I R V R Reverse Leakage Current @ V R Reverse Voltage V Z V R I R V F I ZT V I F Forward Current V F Forward Voltage @ I F Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Zener Voltage Regulator
MMSZ4xxxTG Series, SZMMSZ4xxxTG Series ELECTRICAL CHARACTERISTICS (T A = 5 C unless otherwise noted, V F =.9 V Max. @ I F = ma) Zener Voltage (Note 3) Leakage Current Device* Device Marking V Z (Volts) @ I ZT I R @ V R Min Nom Max A A Volts MMSZ4678TG CC.7.8.89 5 7.5 MMSZ4679TG CD.9.. 5 5 MMSZ468TG CE.9..3 5 4 MMSZ468TG CF.8.4.5 5 MMSZ468TG CH.565.7.835 5 MMSZ4683TG CJ.85 3. 3.5 5.8 MMSZ4684TG CK 3.3 3.3 3.47 5 7.5.5 MMSZ4685TG CM 3.4 3.6 3.78 5 7.5 MMSZ4686TG CN 3.7 3.9 4. 5 5 MMSZ4687TG CP 4.9 4.3 4.5 5 4 MMSZ4688TG CT 4.47 4.7 4.94 5 3 MMSZ4689TG CU 4.85 5. 5.36 5 3 MMSZ469TG/T3G CV 5.3 5.6 5.88 5 4 MMSZ469TG CA 5.89 6. 6.5 5 5 MMSZ469TG CX 6.46 6.8 7.4 5 5. MMSZ4693TG CY 7.3 7.5 7.88 5 5.7 MMSZ4694TG CZ 7.79 8. 8.6 5 6. MMSZ4695TG DC 8.7 8.7 9.4 5 6.6 MMSZ4696TG DD 8.65 9. 9.56 5 6.9 MMSZ4697TG DE 9.5.5 5 7.6 MMSZ4698TG DF.45.55 5.5 8.4 MMSZ4699TG DH.4.6 5.5 9. MMSZ47TG DJ.35 3 3.65 5.5 9.8 MMSZ47TG DK 3.3 4 4.7 5.5.6 MMSZ47TG DM 4.5 5 5.75 5.5.4 MMSZ473TG DN 5. 6 6.8 5.5. MMSZ474TG DP 6.5 7 7.85 5.5.9 MMSZ475TG DT 7. 8 8.9 5.5 3.6 MMSZ476TG DU 8.5 9 9.95 5.5 4.4 MMSZ477TG DV 9.. 5. 5. MMSZ478TG DA.9 3. 5. 6.7 MMSZ479TG DX.8 4 5. 5. 8. MMSZ47TG DY 3.75 5 6.5 5. 9. MMSZ47TG EA 5.65 7 8.35 5..4 MMSZ47TG EC 6.6 8 9.4 5.. MMSZ473TG ED 8.5 3 3.5 5..8 MMSZ474TG EE 3.35 33 34.65 5. 5. MMSZ475TG EF 34. 36 37.8 5. 7.3 MMSZ476TG EH 37.5 39 4.95 5. 9.6 MMSZ477TG EJ 4.85 43 45.5 5. 3.6 3. Nominal Zener voltage is measured with the device junction in thermal equilibrium at T L = 3 C ± C. *Include SZ-prefix devices where applicable. MMSZ473 and MMSZ47 Not Available in,/ 3
MMSZ4xxxTG Series, SZMMSZ4xxxTG Series TYPICAL CHARACTERISTICS VZ, TEMPERATURE COEFFICIENT (mv/ C) θ 8 7 6 5 4 3 - - - 3 TYPICAL T C VALUES V Z @ I ZT 3 4 5 6 7 8 9 VZ, TEMPERATURE COEFFICIENT (mv/ C) θ TYPICAL T C VALUES V Z @ I ZT Figure. Temperature Coefficients (Temperature Range 55 C to +5 C) Figure. Temperature Coefficients (Temperature Range 55 C to +5 C). P D, POWER DISSIPATION (WATTS)..8.6.4. P D versus T A 5 P D versus T L 5 75 T, TEMPERATURE (5C) 5 5 Ppk, PEAK SURGE POWER (WATTS). RECTANGULAR WAVEFORM, T A = 5 C PW, PULSE WIDTH (ms) Figure 3. Steady State Power Derating Figure 4. Maximum Nonrepetitive Surge Power ZZT, DYNAMIC IMPEDANCE ( Ω ) I Z = ma 5 ma ma T J = 5 C I Z(AC) =. I Z(DC) f = khz IF, FORWARD CURRENT (ma) 75 V (MMSZ567BT) 9 V (MMSZ57BT) 5 C 75 C 5 C C V Z, NOMINAL ZENER VOLTAGE.4.5.6.7.8.9 V F, FORWARD VOLTAGE (V)... Figure 5. Effect of Zener Voltage on Zener Impedance Figure 6. Typical Forward Voltage 4
MMSZ4xxxTG Series, SZMMSZ4xxxTG Series TYPICAL CHARACTERISTICS C, CAPACITANCE (pf) V BIAS V BIAS BIAS AT 5% OF V Z NOM T A = 5 C I R, LEAKAGE CURRENT ( μ A)... +5 C + 5 C. - 55 C. 3 4 5 6 7 8 9 Figure 7. Typical Capacitance Figure 8. Typical Leakage Current T A = 5 C T A = 5 C I Z, ZENER CURRENT (ma). I Z, ZENER CURRENT (ma).. 4 6 8 V Z, ZENER VOLTAGE (V). 3 5 7 9 V Z, ZENER VOLTAGE (V) Figure 9. Zener Voltage versus Zener Current (V Z Up to V) Figure. Zener Voltage versus Zener Current ( V to 9 V) 5
MMSZ4xxxTG Series, SZMMSZ4xxxTG Series PACKAGE DIMENSIONS SOD 3 CASE 45 4 ISSUE G H E D ÂÂÂÂ b E C A A L NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, 98.. CONTROLLING DIMENSION: INCH. MILLIMETERS DIM MIN NOM MAX A.94.7.35.37 A..5.. b.5.6.7. c --- ---.5 D.4.6.8.55 E.54.69.84. H E 3.56 3.68 3.86.4 L.5 --- ---. STYLE : PIN. CATHODE. ANODE INCHES MIN NOM MAX.46.53..4.4.8 --- ---.63.6.45.6.7..5 --- --- --- --- SOLDERING FOOTPRINT*.9.36..48.36.93 4.9.65 SCALE : mm inches *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 563, Denver, Colorado 87 USA Phone: 33 675 75 or 8 344 386 Toll Free USA/Canada Fax: 33 675 76 or 8 344 3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 8 8 9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 4 33 79 9 Japan Customer Focus Center Phone: 8 3 587 5 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMSZ4678T/D