AMIS High-Speed 3.3 V Digital Interface CAN Transceiver
|
|
- Dwight French
- 7 years ago
- Views:
Transcription
1 AMIS-43 High-Speed 3.3 V Digital Interface CAN Transceiver Description The AMIS 43 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus. It may be used in both V and 4 V systems. The digital interface level is powered from a 3.3 V supply providing true I/O voltage levels for 3.3 V CAN controllers. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. Due to the wide common mode voltage range of the receiver inputs, the AMIS 43 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals. The AMIS 43 is primarily intended for applications where long network lengths are mandatory. Examples are elevators, in building networks, process control and trains. To cope with the long bus delay the communication speed needs to be low. AMIS 43 allows low transmit data rates down to 0 kbit/s or lower. Features True 3.3 V or.0 V Logic Level Interface Fully Compatible with the ISO 898 Standard Wide Range of Bus Communication Speed (0 up to Mbit/s) Allows Low Transmit Data Rate in Networks Exceeding km Ideally Suited for V and 4 V Applications Low Electromagnetic Emission (EME); Common Mode Choke is No Longer Required Differential Receiver with Wide Common Mode Range ( 3 V) for High Electromagnetic Susceptibility (EMS) No Disturbance of the Bus Lines with an Unpowered Node Thermal Protection Bus Pins Protected Against Transients Short Circuit Proof to Supply Voltage and Ground ESD Protection for CAN Bus at 8 kv These are Pb Free Devices* RxD 3 4 PIN ASSIGNMENT AMIS 43 (Top View) 8 V REF PC ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 0 of this data sheet. *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. Semiconductor Components Industries, LLC, 009 January, 009 Rev. 3 Publication Order Number: AMIS 43/D
2 Table. TECHNICAL CHARACTERISTICS Symbol Parameter Condition Max Max Unit V DC Voltage at Pin 0 < <. V; No Time Limit 4 +4 V V DC Voltage at Pin 0 < <. V; No Time Limit 4 +4 V V o(dif)(bus_dom) Differential Bus Output Voltage in Dominant State 4. < R LT < 0. 3 V t pd(rec dom) Propagation Delay to RxD ns t pd(dom rec) Propagation Delay to RxD 00 4 ns C M range Input Common Mode Range for Comparator Guaranteed Differential Receiver Threshold and Leakage Current 3 +3 V V CM peak Common Mode Peak Figures and 8 (Note ) mv V CM step Common Mode Step Figures and 8 (Note ) 0 0 mv. The parameters V CM peak and V CM step guarantee low EME. AMIS 43 Thermal shutdown 3 8 S Driver control RxD 4 COMP R i(cm) V cc / + V REF R i(cm) PC Figure. Block Diagram Table. PIN DESCRIPTION Pin Name Description Transmit Data Input; Low Input Dominant Driver; Internal Pullup Current Ground 3 Supply Voltage 4 RxD Receive Data Output; Dominant Transmitter Low Output V REF Reference Voltage Output LOW Level CAN Bus Line (Low in Dominant Mode) HIGH Level CAN Bus Line (High in Dominant Mode) V Supply for Digital I/O
3 Table 3. ABSOLUTE MAXIMUM RATINGS Symbol Parameter Conditions Min Max Unit Supply Voltage V I/O Interface Voltage V V DC Voltage at Pin 0 < <. V; No Time Limit 4 +4 V V DC Voltage at Pin 0 < <. V; No Time Limit 4 +4 V V DC Voltage at Pin V V RxD DC Voltage at Pin RxD V V REF DC Voltage at Pin V REF V V tran() Transient Voltage at Pin Note 0 +0 V V tran() Transient Voltage at Pin Note 0 +0 V V tran(vref) Transient Voltage at Pin V REF Note 0 +0 V V esd(/ ) Electrostatic Discharge Voltage at and Pin Note 4 Note kv V V esd Electrostatic Discharge Voltage at All Other Pins Note 4 Note kv V Latch up Static Latch up at All Pins Note 00 ma T stg Storage Temperature + C T A Ambient Temperature 40 + C T J Maximum Junction Temperature C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.. Applied transient waveforms in accordance with ISO 3 part 3, test pulses,, 3a, and 3b (see Figure 4). 3. Standardized human body model system ESD pulses in accordance to IEC Standardized human body model ESD pulses in accordance to MIL883 method 30. Supply pin 8 is ±4kV.. Static latch up immunity: static latch up protection level when tested according to EIA/JESD8.. Standardized charged device model ESD pulses when tested according to EOS/ESD DS Table 4. THERMAL CHARACTERISTICS Symbol Parameter Conditions Value Unit R th(vj a) R th(vj s ) Thermal Resistance from Junction to Ambient in SO 8 Package Thermal Resistance from Junction to Substrate of Bare Die In Free Air 4 k/w In Free Air 4 k/w 3
4 APPLICATION INFORMATION VBAT IN V reg OUT nf IN 3.3V reg OUT CAN BUS PC CAN controller RxD 4 8 AMIS 43 3 VREF nf Figure. Application Diagram 4
5 FUNCTIONAL DESCRIPTION General The AMIS 43 is the interface between the CAN protocol controller and the physical bus. It is intended for use in industrial and automotive applications requiring baud rates up to Mbit/s. It provides differential transmit capability to the bus and differential receiver capability to the CAN protocol controller. It is fully compatible to the ISO 898 standard. Operating Modes AMIS 43 only operates in high speed mode as illustrated in Table. The transceiver is able to communicate via the bus lines. The signals are transmitted and received to the CAN controller via the pins and RxD. The slopes on the bus lines outputs are optimized to give extremely low EME. Table. FUNCTIONAL TABLE OF AMIS 43; x = don t care Pin Pin Pin Bus State Pin RxD 4. to. V 0 High Low Dominant 0 4. to. V (or floating) / / Recessive < PORL (Unpowered) x 0 V < < 0 V < < Recessive PORL < < 4. V > V 0 V < < 0 V < < Recessive Overtemperature Detection A thermal protection circuit protects the IC from damage by switching off the transmitter if the junction temperature exceeds a value of approximately 0 C. Because the transmitter dissipates most of the power, the power dissipation and temperature of the IC is reduced. All other IC functions continue to operate. The transmitter off state resets when Pin goes HIGH. The thermal protection circuit is particularly needed when a bus line short circuits. High Communication Speed Range The transceiver is primarily intended for industrial applications. It allows very low baud rates needed for long bus length applications. But also high speed communication is possible up to Mbit/s. Fail Safe Features A current limiting circuit protects the transmitter output stage from damage caused by accidental short circuit to either positive or negative supply voltage although power dissipation increases during this fault condition. The pins and are protected from automotive electrical transients (according to ISO 3 ; see Figure 3). Should become disconnected, this pin is pulled high internally. When the supply is removed, Pins and RxD will be floating. This prevents the AMIS 43 from being supplied by the CAN controller through the I/O Pins. 3.3 V Interface AMIS 43 may be used to interface with 3.3 V or V controllers by use of the pin. This pin may be supplied with 3.3 V or V to have the corresponding digital interface voltage levels. When the pin is supplied at. V, even interfacing with. V CAN controllers is possible. See also Digital Output =. V, Table. In this case a pull up resistor from to is necessary.
6 Definitions All voltages are referenced to (Pin ). Positive currents flow into the IC. Sinking current means that the current is flowing into the pin. Sourcing current means that the current is flowing out of the pin. Table. DC CHARACTERISTICS = 4. V to. V, =.9 V to 3. V; T J = 40 C to +0 C; R LT = 0 unless specified otherwise. Symbol Parameter Conditions Min Typ Max Unit SUPPLY (Pin and pin ) I CC Supply Current Dominant; V TXD = 0 V 4 Recessive; V TXD = 4 I 33 I/O Interface Current = 3.3 V; C L = 0 pf; recessive I 33 I/O Interface Current (Note ) = 3.3 V; C L = 0pF; Mbps 8 ma A 0 A TRANSMITTER DATA INPUT (Pin ) V IH HIGH Level Input Voltage Output recessive.0 V V IL LOW Level Input Voltage Output dominant V I IH HIGH Level Input Current V = 0 + A I IL LOW Level Input Current V = 0 V A C i Input Capacitance (Note ) 0 pf RECEIVER DATA OUTPUT (Pin RxD) V OH HIGH Level Output Voltage I RXD = 0 ma 0. x 0. x V V OL LOW Level Output Voltage I RXD = ma V I oh HIGH Level Output Current (Note ) V RxD = 0. x 0 0 ma I ol LOW Level Output Current (Note ) V RxD = 0.4 V 0 ma REFERENCE VOLTAGE OUTPUT (Pin V REF ) V REF Reference Output Voltage 0 A < I VREF < +0 A 0.4 x V REF_CM Reference Output Voltage for Full Common Mode Range 3 V < V < +3 V; 3 V < V < +3 V 0.40 x 0.0 x 0.0 x 0. x 0.0 x BUS LINES (Pins and ) V o(reces)() Recessive Bus Voltage at Pin V = ; no load V V o(reces)() Recessive Bus Voltage at Pin V = ; no load V I o(reces)() Recessive Output Current at Pin 3 V < V < +3 V; 0 V < <. V. +. ma I o(reces)() Recessive Output Current at Pin 3 V < V < +3 V; 0 V < <. V. +. ma V o(dom)() Dominant Output Voltage at Pin V = 0 V V V o(dom)() Dominant Output Voltage at Pin V = 0 V V V o(dif)(bus) Differential Bus Output Voltage (V V ) V = 0 V; Dominant; 4. < R LT < 0 V = ; Recessive; No Load V mv I o(sc) () Short Circuit Output Current at Pin V = 0 V; V = 0 V ma I o(sc) () Short Circuit Output Current at Pin V = 3 V; V = 0 V ma V i(dif)(th) Differential Receiver Threshold Voltage V < V < + V; V < V < + V; See Figure 4. Not tested at ATE V V V
7 Table. DC CHARACTERISTICS = 4. V to. V, =.9 V to 3. V; T J = 40 C to +0 C; R LT = 0 unless specified otherwise. Symbol Parameter BUS LINES (Pins and ) V ihcm(dif)(th) Differential Receiver Threshold Voltage for High Common Mode Conditions 3 V < V < +3 V; 3 V < V < +3 V; See Figure 4 V i(dif)(hys) Differential Receiver Input Voltage Hysteresis 3 V < V < +3 V; 3 V < V < +3 V; See Figure 4 R i(cm)() R i(cm) () R i(cm)(m) Common Mode Input Resistance at Pin Common Mode Input Resistance at Pin Matching Between Pin and Pin Common Mode Input Resistance Min Typ Max Unit V mv 3 k 3 k V = V % R i(dif) Differential Input Resistance 0 k BUS LINES (Pins and ) C i() Input Capacitance at Pin V = ; Not Tested. 0 pf C i() Input Capacitance at Pin V = ; Not Tested. 0 pf C i(dif) Differential Input Capacitance V = ; Not Tested 3. 0 pf I LI() Input Leakage Current at Pin = 0 V; V = V A I LI() Input Leakage Current at Pin = 0 V; V = V A V CM peak V CM step Common Mode Peak During Transition from Dom Rec or Rec Dom Difference in Common Mode Between Dominant and Recessive State POWER ON RESET PORL POR Level,, V ref in Tri State Below POR Level Figures and mv Figures and mv V THERMAL SHUTDOWN T J(sd) Shutdown Junction Temperature C TIMING CHARACTERISTICS (See Figures and ) t d( BUSon) Delay to Bus Active ns t d( BUSoff) Delay to Bus Inactive ns t d(buson RxD) Delay Bus Active to RxD 0 ns t d(busoff RxD) Delay Bus Inactive to RxD 00 3 ns t pd(rec dom) t d(dom rec). Not tested at ATE Propagation Delay to RxD from Recessive to Dominant Propagation Delay to RxD from Dominant to Recessive ns 00 4 ns Table. DIGITAL OUTPUT =. V = 4. to. V; =. V %; T J = 40 to +0 C; R LT = 0 unless specified otherwise. Symbol Parameter Conditions Min Typ Max Unit RECEIVER DATA OUTPUT (Pin RxD) I oh HIGH Level Output Current V OH > 0.9 x. ma I ol LOW Level Output Current V OL < 0. x 4 ma
8 MEASUREMENT SETUPS AND DEFINITIONS +3.3 V + V 00 nf 0 pf RxD 4 AMIS nf nf V REF nf Transient Generator PC Figure 3. Test Circuit for Automotive Transients V RxD High Low PC Hysteresis Figure 4. Hysteresis of the Receiver V i(dif)(hys) +3.3 V + V 00 nf 00 nf 0 pf RxD AMIS 43 R LT V REF C LT 00 pf 0 PC Figure. Test Circuit for Timing Characteristics 8
9 HIGH LOW V i(dif) = V V 0.9V 0.V dominant recessive RxD 0.3 x 0. x t d( BUSon) t d( BUSoff) td(buson RxD) td(busoff RxD) t pd(rec dom) t pd(dom rec) PC Figure. Timing Diagram for AC Characteristics +3.3 V + V 00 nf Generator 3 8 AMIS 43. k 0 nf. k Active Probe Spectrum Anayzer RxD V REF 0 pf 4 nf Figure. Basic Test Setup for Electromagnetic Measurement PC V CM = 0.*(V +V ) V CM step V CM peak recessive V CM peak PC Figure 8. Common Mode Voltage Peaks (See Measurement Setup Figure ) 9
10 DEVICE ORDERING INFORMATION Part Number Temperature Range Package Type Shipping AMIS43ICAGG 40 C C SOIC 8 (Pb Free) 9 Tube / Tray AMIS43ICAGRG 40 C C SOIC 8 (Pb Free) 3000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD80/D. 0
11 PACKAGE DIMENSIONS SOIC 8 CASE AZ 0 ISSUE O ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 3, Denver, Colorado 80 USA Phone: 303 or Toll Free USA/Canada Fax: 303 or Toll Free USA/Canada orderlit@onsemi.com N. American Technical Support: Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: Japan Customer Focus Center Phone: ON Semiconductor Website: Order Literature: For additional information, please contact your local Sales Representative AMIS 43/D
NCV7341. High Speed Low Power CAN Transceiver
High Speed Low Power CAN Transceiver The NCV731 CAN transceiver is the interface between a controller area network (CAN) protocol controller the physical bus may be used in both 12 V 2 V systems. The transceiver
More informationMC14008B. 4-Bit Full Adder
4-Bit Full Adder The MC4008B 4bit full adder is constructed with MOS PChannel and NChannel enhancement mode devices in a single monolithic structure. This device consists of four full adders with fast
More informationESD9X3.3ST5G Series, SZESD9X3.3ST5G Series. Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection
ESD9X3.3ST5G Series, SZESD9X3.3ST5G Series Transient Voltage Suppressors Micro Packaged Diodes for ESD Protection The ESD9X Series is designed to protect voltage sensitive components from ESD. Excellent
More informationMC10SX1190. Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit
Fibre Channel Coaxial Cable Driver and Loop Resiliency Circuit Description The MC10SX1190 is a differential receiver, differential transmitter specifically designed to drive coaxial cables. It incorporates
More informationMMBZ52xxBLT1G Series, SZMMBZ52xxBLT3G. Zener Voltage Regulators. 225 mw SOT 23 Surface Mount
MMBZ5xxBLTG Series, SZMMBZ5xxBLTG Series Zener Voltage Regulators 5 mw SOT Surface Mount This series of Zener diodes is offered in the convenient, surface mount plastic SOT package. These devices are designed
More informationNUD4011. Low Current LED Driver
NUD0 Low LED Driver This device is designed to replace discrete solutions for driving LEDs in AC/DC high voltage applications (up to 00 V). An external resistor allows the circuit designer to set the drive
More informationESD7484. 4-Line Ultra-Large Bandwidth ESD Protection
4-Line Ultra-Large Bandwidth ESD Protection Functional Description The ESD7484 chip is a monolithic, application specific discrete device dedicated to ESD protection of the HDMI connection. It also offers
More informationNTMS4920NR2G. Power MOSFET 30 V, 17 A, N Channel, SO 8 Features
NTMS9N Power MOSFET 3 V, 7 A, N Channel, SO Features Low R DS(on) to Minimize Conduction Losses Low Capacitance to Minimize Driver Losses Optimized Gate Charge to Minimize Switching Losses These Devices
More informationLC03-6R2G. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces. SO-8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 2 kw PEAK POWER 6 VOLTS
Low Capacitance Surface Mount TVS for High-Speed Data terfaces The LC3- transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD, EFT, and lighting.
More informationMMSZxxxT1G Series, SZMMSZxxxT1G Series. Zener Voltage Regulators. 500 mw SOD 123 Surface Mount
MMSZxxxTG Series, SZMMSZxxxTG Series Zener Voltage Regulators 5 mw SOD 3 Surface Mount Three complete series of Zener diodes are offered in the convenient, surface mount plastic SOD 3 package. These devices
More information1SMB59xxBT3G Series, SZ1SMB59xxT3G Series. 3 Watt Plastic Surface Mount Zener Voltage Regulators
9xxBTG Series, SZ9xxTG Series Watt Plastic Surface Mount Zener Voltage Regulators This complete new line of W Zener diodes offers the following advantages. Features Zener Voltage Range. V to V ESD Rating
More informationLM350. 3.0 A, Adjustable Output, Positive Voltage Regulator THREE TERMINAL ADJUSTABLE POSITIVE VOLTAGE REGULATOR
3. A, able Output, Positive Voltage Regulator The is an adjustable threeterminal positive voltage regulator capable of supplying in excess of 3. A over an output voltage range of 1.2 V to 33 V. This voltage
More informationVdc. Vdc. Adc. W W/ C T J, T stg 65 to + 200 C
2N6284 (NPN); 2N6286, Preferred Device Darlington Complementary Silicon Power Transistors These packages are designed for general purpose amplifier and low frequency switching applications. Features High
More informationCS8481. 3.3 V/250 ma, 5.0 V/100 ma Micropower Low Dropout Regulator with ENABLE
3.3 /250 ma, 5.0 /100 ma Micropower Low Dropout Regulator with The CS8481 is a precision, dual Micropower linear voltage regulator. The switched 3.3 primary output ( OUT1 ) supplies up to 250 ma while
More informationNUD4001, NSVD4001. High Current LED Driver
NUD, NSVD High Current LED Driver This device is designed to replace discrete solutions for driving LEDs in low voltage AC DC applications. V, V or V. An external resistor allows the circuit designer to
More informationBC327, BC327-16, BC327-25, BC327-40. Amplifier Transistors. PNP Silicon. These are Pb Free Devices* http://onsemi.com. Features MAXIMUM RATINGS
BC327, BC327-16, BC327-25, BC327-4 Amplifier Transistors PNP Silicon Features These are PbFree Devices* MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter Voltage V CEO 45 Vdc CollectorEmitter Voltage
More information1N59xxBRNG Series. 3 W DO-41 Surmetic 30 Zener Voltage Regulators
W DO-4 Surmetic 0 Zener Voltage Regulators This is a N9xxBRNG series with limits and excellent operating characteristics that reflect the superior capabilities of silicon oxide passivated junctions. All
More informationNUP2105L, SZNUP2105L. Dual Line CAN Bus Protector SOT 23 DUAL BIDIRECTIONAL VOLTAGE SUPPRESSOR 350 W PEAK POWER
Dual Line CAN Bus Protector The SZ/NUP215L has been designed to protect the CAN transceiver in high speed and fault tolerant networks from ESD and other harmful transient voltage events. This device provides
More information2N4401. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS THERMAL CHARACTERISTICS
General Purpose Transistors NPN Silicon Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage V CEO 4 Vdc Collector Base Voltage V CBO 6 Vdc Emitter
More informationNCV7351. High Speed CAN Transceiver
High peed CAN Transceiver The NCV CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both V and V systems. The transceiver
More informationMMBF4391LT1G, SMMBF4391LT1G, MMBF4392LT1G, MMBF4393LT1G. JFET Switching Transistors. N Channel
LT1G, SLT1G, LT1G, LT1G JFET Switching Transistors NChannel Features S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ1 Qualified and PPAP Capable
More informationP2N2222ARL1G. Amplifier Transistors. NPN Silicon. These are Pb Free Devices* Features. http://onsemi.com
Amplifier Transistors NPN Silicon Features These are PbFree Devices* MAXIMUM RATINGS (T A = 25 C unless otherwise noted) Characteristic Symbol Value Unit CollectorEmitter Voltage V CEO 4 CollectorBase
More information3EZ6.2D5 Series. 3 Watt DO-41 Surmetic 30 Zener Voltage Regulators
EZ6.D Series Watt DO- Surmetic Zener Voltage Regulators This is a complete series of Watt Zener diodes with limits and excellent operating characteristics that reflect the superior capabilities of silicon-oxide
More information2N6056. NPN Darlington Silicon Power Transistor DARLINGTON 8 AMPERE SILICON POWER TRANSISTOR 80 VOLTS, 100 WATTS
NPN Darlington Silicon Power Transistor The NPN Darlington silicon power transistor is designed for general purpose amplifier and low frequency switching applications. High DC Current Gain h FE = 3000
More informationBC546B, BC547A, B, C, BC548B, C. Amplifier Transistors. NPN Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS
B, A, B, C, B, C Amplifier Transistors NPN Silicon Features PbFree Packages are Available* COLLECTOR MAXIMUM RATINGS Collector - Emitter oltage Collector - Base oltage Rating Symbol alue Unit CEO 65 45
More information2N4921G, 2N4922G, 2N4923G. Medium-Power Plastic NPN Silicon Transistors 1.0 AMPERE GENERAL PURPOSE POWER TRANSISTORS 40 80 VOLTS, 30 WATTS
,, Medium-Power Plastic NPN Silicon Transistors These highperformance plastic devices are designed for driver circuits, switching, and amplifier applications. Features Low Saturation Voltage Excellent
More informationMPS2222, MPS2222A. NPN Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS MARKING DIAGRAMS THERMAL CHARACTERISTICS
, is a Preferred Device General Purpose Transistors NPN Silicon Features PbFree Packages are Available* COLLECTOR 3 MAXIMUM RATINGS CollectorEmitter Voltage CollectorBase Voltage Rating Symbol Value Unit
More informationMCR08B, MCR08M. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 0.8 AMPERES RMS 200 thru 600 VOLTS
MCR8B, MCR8M Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors PNPN devices designed for line powered consumer applications such as relay and lamp drivers, small motor controls,
More informationCS3341, CS3351, CS387. Alternator Voltage Regulator Darlington Driver
Alternator Voltage Regulator Darlington Driver The CS3341/3351/387 integral alternator regulator integrated circuit provides the voltage regulation for automotive, 3 phase alternators. It drives an external
More informationCAT4101TV. 1 A Constant-Current LED Driver with PWM Dimming
A Constant-Current LED Driver with PWM Dimming Description The CAT4 is a constant current sink driving a string of high brightness LEDs up to A with very low dropout of.5 V at full load. It requires no
More information2N5460, 2N5461, 2N5462. JFET Amplifier. P Channel Depletion. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS
2N546, 2N5461, JFET Amplifier PChannel Depletion Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit Drain Gate Voltage V DG 4 Vdc Reverse Gate Source Voltage V GSR 4 Vdc Forward
More informationCM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array
CM1213A-04SO, SZCM1213A-04SO 4-Channel Low Capacitance ESD Protection Array Product Description CM1213A 04SO has been designed to provide ESD protection for electronic components or subsystems requiring
More informationMC74AC138, MC74ACT138. 1-of-8 Decoder/Demultiplexer
-of-8 Decoder/Demultiplexer The MC74AC38/74ACT38 is a high speed of 8 decoder/demultiplexer. This device is ideally suited for high speed bipolar memory chip select address decoding. The multiple input
More informationTIP140, TIP141, TIP142, (NPN); TIP145, TIP146, TIP147, (PNP) Darlington Complementary Silicon Power Transistors
TIP140, TIP141, TIP142, (); TIP145, TIP146, TIP147, () Darlington Complementary Silicon Power Transistors Designed for generalpurpose amplifier and low frequency switching applications. Features High DC
More informationBC337, BC337-25, BC337-40. Amplifier Transistors. NPN Silicon. These are Pb Free Devices. http://onsemi.com. Features MAXIMUM RATINGS
BC337, BC337-25, BC337-4 Amplifier Transistors NPN Silicon Features These are PbFree Devices COLLECTOR MAXIMUM RATINGS Rating Symbol alue Unit 2 BASE Collector Emitter oltage CEO 45 dc Collector Base oltage
More information2N3903, 2N3904. General Purpose Transistors. NPN Silicon. Features Pb Free Package May be Available. The G Suffix Denotes a Pb Free Lead Finish
N393, N393 is a Preferred Device General Purpose Transistors NPN Silicon Features PbFree Package May be Available. The GSuffix Denotes a PbFree Lead Finish MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter
More information2N3906. General Purpose Transistors. PNP Silicon. Pb Free Packages are Available* http://onsemi.com. Features MAXIMUM RATINGS
2N396 General Purpose Transistors PNP Silicon Features PbFree Packages are Available* COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector Emitter Voltage V CEO 4 Vdc Collector Base Voltage V
More informationMPSA92, MPSA93. High Voltage Transistors. PNP Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS MARKING DIAGRAM
MPSA92, High Voltage Transistors PNP Silicon Features PbFree Packages are Available* MAXIMUM RATINGS CollectorEmitter Voltage CollectorBase Voltage Rating Symbol Value Unit MPSA92 MPSA92 V CEO V CBO 200
More informationNUP4106. Low Capacitance Surface Mount TVS for High-Speed Data Interfaces SO 8 LOW CAPACITANCE VOLTAGE SUPPRESSOR 500 WATTS PEAK POWER 3.
Low Capacitance Surface Mount TVS for High-Speed Data Interfaces The NUP0 transient voltage suppressor is designed to protect equipment attached to high speed communication lines from ESD and lightning.
More information2N3903, 2N3904. General Purpose Transistors. NPN Silicon. Pb Free Packages are Available* Features. http://onsemi.com MAXIMUM RATINGS
N393, General Purpose Transistors NPN Silicon Features PbFree Packages are Available* MAXIMUM RATINGS Rating Symbol Value Unit CollectorEmitter Voltage V CEO 4 Vdc CollectorBase Voltage V CBO 6 Vdc EmitterBase
More information2N6387, 2N6388. Plastic Medium-Power Silicon Transistors DARLINGTON NPN SILICON POWER TRANSISTORS 8 AND 10 AMPERES 65 WATTS, 60-80 VOLTS
2N6388 is a Preferred Device Plastic MediumPower Silicon Transistors These devices are designed for generalpurpose amplifier and lowspeed switching applications. Features High DC Current Gain h FE = 2500
More informationNS3L500. 3.3V, 8-Channel, 2:1 Gigabit Ethernet LAN Switch with LED Switch
3.3V, 8-Channel, : Gigabit Ethernet LAN Switch with LED Switch The NS3L500 is a 8 channel : LAN switch with 3 additional built in SPDT switches for LED routing. This switch is ideal for Gigabit LAN applications
More informationNSI45060JDT4G. Adjustable Constant Current Regulator & LED Driver. 45 V, 60 100 ma 15%, 2.7 W Package
NSI5JDTG Adjustable Constant Current Regulator & Driver 5 V, ma 5%, 2.7 W Package The adjustable constant current regulator (CCR) is a simple, economical and robust device designed to provide a cost effective
More informationBC546B, BC547A, B, C, BC548B, C. Amplifier Transistors. NPN Silicon. Pb Free Package is Available* Features. http://onsemi.com MAXIMUM RATINGS
B, A, B, C, B, C Amplifier Transistors NPN Silicon Features PbFree Package is Available* COLLECTOR 1 2 BASE MAXIMUM RATINGS Collector-Emitter oltage Collector-Base oltage Rating Symbol alue Unit CEO 65
More information1.5SMC6.8AT3G Series, SZ1.5SMC6.8AT3G Series. 1500 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
.6.8AT3G Series, SZ.6.8AT3G Series 00 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More informationMC74HC132A. Quad 2-Input NAND Gate with Schmitt-Trigger Inputs. High Performance Silicon Gate CMOS
MC74HC32A Quad 2-Input NAND Gate with Schmitt-Trigger Inputs High Performance Silicon Gate CMOS The MC74HC32A is identical in pinout to the LS32. The device inputs are compatible with standard CMOS outputs;
More information2N2222A. Small Signal Switching Transistor. NPN Silicon. MIL PRF 19500/255 Qualified Available as JAN, JANTX, and JANTXV. http://onsemi.com.
Small Signal Switching Transistor NPN Silicon Features MILPRF19/ Qualified Available as JAN, JANTX, and JANTXV COLLECTOR MAXIMUM RATINGS (T A = unless otherwise noted) Characteristic Symbol Value Unit
More information1SMA5.0AT3G Series, SZ1SMA5.0AT3G Series. 400 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
.AT3G Series, SZ.AT3G Series 4 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The series is designed to protect voltage sensitive components from high voltage, high energy transients.
More information1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007. Axial Lead Standard Recovery Rectifiers
1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 Axial ead Standard Recovery Rectifiers This data sheet provides information on subminiature size, axial lead mounted rectifiers for general purpose
More informationCM2009. VGA Port Companion Circuit
VGA Port Companion Circuit Product Description The CM2009 connects between a video graphics controller embedded in a PC, graphics adapter card or set top box and the VGA or DVI I port connector. The CM2009
More informationC106 Series. Sensitive Gate Silicon Controlled Rectifiers
C6 Series Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control;
More informationMC14175B/D. Quad Type D Flip-Flop
Quad Type D Flip-Flop The MC475B quad type D flipflop is cotructed with MOS Pchannel and Nchannel enhancement mode devices in a single monolithic structure. Each of the four flipflops is positiveedge triggered
More informationMC14001B Series. B Suffix Series CMOS Gates MC14001B, MC14011B, MC14023B, MC14025B, MC14071B, MC14073B, MC14081B, MC14082B
MC4B Series BSuffix Series CMOS Gates MC4B, MC4B, MC4B, MC4B, MC4B, MC4B, MC4B, MC4B The B Series logic gates are constructed with P and N channel enhancement mode devices in a single monolithic structure
More informationNLX1G74. Single D Flip-Flop
NG74 Single D Flip-Flop The NG74 is a high performance, full function edge triggered D Flip Flop in ultra small footprint. The NG74 input structures provide protection when voltages up to 7. are applied,
More informationLOW POWER SCHOTTKY. http://onsemi.com GUARANTEED OPERATING RANGES ORDERING INFORMATION
The TTL/MSI SN74LS151 is a high speed 8-input Digital Multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. The LS151 can be used as a universal function
More informationNE592 Video Amplifier
Video Amplifier The NE is a monolithic, two-stage, differential output, wideband video amplifier. It offers fixed gains of and without external components and adjustable gains from to with one external
More informationSpread Spectrum Clock Generator
Spread Spectrum Clock Generator Features Generates a 1x (PCS3P5811), x (PCS3P581) and 4x() low EMI spread spectrum clock of the input frequency Provides up to 15dB of EMI suppression Input Frequency: 4MHz
More informationAND8433/D. Using ON Semiconductor Constant Current Regulator (CCR) Devices in AC Applications APPLICATION NOTE
Using ON Semiconductor Constant Current Regulator (CCR) Devices in AC Applications Introduction This update includes additional information on 220 V ac lighting circuits with the addition of ON Semiconductors
More informationNCT65. Remote Trip Point Temperature Sensor with Overtemperature Shutdown
Remote Trip Point Temperature Sensor with Overtemperature Shutdown Description The is a low power temperature monitor housed in an MSOP8 package. It monitors the temperature of a remote thermal diode.
More informationMC34063A, MC33063A, NCV33063A. 1.5 A, Step Up/Down/ Inverting Switching Regulators
MC3403A, MC3303A, NCV3303A. A, StepUp/Down/ Inverting Switching Regulators The MC3403A Series is a monolithic control circuit containing the primary functions required for DCtoDC converters. These devices
More informationNLSX4378. 4-Bit 24 Mb/s Dual-Supply Level Translator
4-Bit 24 Mb/s Dual-Supply Level Translator The NLSX4378 is a 4 bit configurable dual supply bidirectional auto sensing translator that does not require a directional control pin. The I/O and I/O ports
More informationLOW POWER SCHOTTKY. http://onsemi.com GUARANTEED OPERATING RANGES ORDERING INFORMATION PLASTIC N SUFFIX CASE 648 SOIC D SUFFIX CASE 751B
The SN74LS47 are Low Power Schottky BCD to 7-Segment Decoder/ Drivers consisting of NAND gates, input buffers and seven AND-OR-INVERT gates. They offer active LOW, high sink current outputs for driving
More informationTIP41, TIP41A, TIP41B, TIP41C (NPN); TIP42, TIP42A, TIP42B, TIP42C (PNP) Complementary Silicon Plastic Power Transistors
TIP41, TIP41A, TIP41B, TIP41C (NPN); TIP42, TIP42A, TIP42B, TIP42C (PNP) Complementary Silicon Plastic Power Transistors Designed for use in general purpose amplifier and switching applications. Features
More informationCAT4109, CAV4109. 3-Channel Constant-Current RGB LED Driver with Individual PWM Dimming
3-Channel Constant-Current RGB LED Driver with Individual PWM Dimming Description The CAT419/CAV419 is a 3 channel constant current LED driver, requiring no inductor. LED channel currents up to 175 ma
More informationAND8326/D. PCB Design Guidelines for Dual Power Supply Voltage Translators
PCB Design Guidelines for Dual Power Supply Voltage Translators Jim Lepkowski ON Semiconductor Introduction The design of the PCB is an important factor in maximizing the performance of a dual power supply
More informationAND8365/D. 125 kbps with AMIS-4168x APPLICATION NOTE
125 kbps with AMIS-4168x Introduction Question Is it possible to drive 125kB with the AMIS 41682? Please consider all possible CAN bit timings (TSEG1, TSEG2, SJW), a capacitive load at each can pin about
More informationNCP1090GEVB, NCP1094GEVB. Power-over-Ethernet PD Interface Evaluation Board User's Manual EVAL BOARD USER S MANUAL. http://onsemi.
NCP1090GEVB, NCP1094GEVB Power-over-Ethernet PD Interface Evaluation Board User's Manual Introduction The NCP1090GEVB and NCP1094GEVB evaluation boards are designed to showcase the features of the NCP109x
More informationNCP392C NCP392C GND. Figure 1. Typical Application Circuit FUNCTIONAL BLOCK DIAGRAM VREF OVLO OVLO TSD ACOK. Figure 2. Functional Block Diagram
Adjustable Front End Overvoltage Protection Controller with Protected Vbus Output The NCP392C is an overvoltage front end protection controller and is able to disconnect the systems from its output pin
More informationLB1836M. Specifications. Monolithic Digital IC Low-Saturation Bidirectional Motor Driver for Low-Voltage Drive. Absolute Maximum Ratings at Ta = 25 C
Ordering number : EN397F LB136M Monolithic Digital IC Low-Saturation Bidirectional Motor Driver for Low-Voltage Drive http://onsemi.com Overview The LB136M is a low-saturation two-channel bidirectional
More information1N5820, 1N5821, 1N5822. Axial Lead Rectifiers SCHOTTKY BARRIER RECTIFIERS 3.0 AMPERES 20, 30, 40 VOLTS
1N58, 1N5821, 1N5822 1N58 and 1N5822 are Preferred Devices Rectifiers This series employs the Schottky Barrier principle in a large area metal-to-silicon power diode. State-of-the-art geometry features
More informationV OUT. I o+ & I o- (typical) 2.3A & 3.3A. Package Type
July 25 th, 2012 Automotive Grade AUIRS4427S DUAL LOW SIDE DRIVER Features Gate drive supply range from 6 V to 20 V CMOS Schmitt-triggered inputs 3.3V and 5V logic compatible Two independent gate drivers
More informationMJD112 (NPN), MJD117 (PNP) Complementary Darlington Power Transistors. DPAK For Surface Mount Applications
MJD (NPN), MJD7 (PNP) Complementary Darlington Power Transistors For Surface Mount Applications Designed for general purpose power and switching such as output or driver stages in applications such as
More informationAND8336. Design Examples of On Board Dual Supply Voltage Logic Translators. Prepared by: Jim Lepkowski ON Semiconductor. http://onsemi.
Design Examples of On Board Dual Supply Voltage Logic Translators Prepared by: Jim Lepkowski ON Semiconductor Introduction Logic translators can be used to connect ICs together that are located on the
More informationMBR2045CT SCHOTTKY BARRIER RECTIFIER 20 AMPERES 45 VOLTS
Preferred Device... using the Schottky Barrier principle with a platinum barrier metal. These state of the art devices have the following features: Guardring for Stress Protection Low Forward Voltage 150
More informationhttp://onsemi.com MARKING DIAGRAMS LOGIC DIAGRAM PDIP 16 P SUFFIX CASE 648 DIP PIN ASSIGNMENT ORDERING INFORMATION CDIP 16 L SUFFIX CASE 620
The MC10 is a dual master slave dc coupled J K flip flop. Asynchro nous set (S) and reset (R) are provided. The set and reset inputs override the clock. A common clock is provided with separate J K inputs.
More informationMC33064DM 5 UNDERVOLTAGE SENSING CIRCUIT
Order this document by MC3464/D The MC3464 is an undervoltage sensing circuit specifically designed for use as a reset controller in microprocessor-based systems. It offers the designer an economical solution
More informationNCP51200, NCV51200. 3 Amp V TT Termination Regulator DDR1, DDR2, DDR3, LPDDR3, DDR4
3 Amp V TT Termination Regulator DDR1, DDR2, DDR3, LPDDR3, DDR4 The NCP51200 is a source/sink Double Data Rate (DDR) termination regulator specifically designed for low input voltage and low noise systems
More informationSN74LS74AMEL. Dual D Type Positive Edge Triggered Flip Flop LOW POWER SCHOTTKY
SN74S74A ual Type Positive Edge Triggered Flip Flop The SN74S74A dual edge-triggered flip-flop utilizes Schottky TT circuitry to produce high speed -type flip-flops. Each flip-flop has individual clear
More informationAND8008/D. Solid State Control Solutions for Three Phase 1 HP Motor APPLICATION NOTE
Solid State Control Solutions for Three Phase 1 HP Motor APPLICATION NOTE INTRODUCTION In all kinds of manufacturing, it is very common to have equipment that has three phase motors for doing different
More informationLC898300XA. Functions Automatic adjustment to the individual resonance frequency Automatic brake function Initial drive frequency adjustment function
Ordering number : A2053 CMOS LSI Linear Vibrator Driver IC http://onsemi.com Overview is a Linear Vibrator Driver IC for a haptics and a vibrator installed in mobile equipments. The best feature is it
More informationNCP5359. Gate Driver for Notebook Power Systems
Gate Driver for Notebook Power Systems The NCP5359 is a high performance dual MOSFET gate driver optimized to drive the gates of both high side and low side power MOSFETs in a synchronous buck converter.
More informationLM317, NCV317. 1.5 A Adjustable Output, Positive Voltage Regulator
, NCV317 A able Output, Positive Voltage Regulator The is an adjustable 3terminal positive voltage regulator capable of supplying in excess of A over an output voltage range of 1.2 V to 37 V. This voltage
More informationMCR100 Series. Sensitive Gate Silicon Controlled Rectifiers. Reverse Blocking Thyristors. SCRs 0.8 A RMS 100 thru 600 V
Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls,
More informationDevice Application Topology Efficiency Input Power Power Factor THD NSIC2030JB, NSIC2050JB R4 Q2 Q1 R9
120 V AC, Low Cost, Dimmable, Linear, Parallel to Series with Switch In CCR LED Lighting Circuit DESIGN NOTE Table 1. DEVICE DETAILS Device Application Topology Efficiency Input Power Power Factor THD
More informationNCP432, NCP433. 1.5A Ultra-Small Controlled Load Switch with Auto-Discharge Path
1.5 Ultra-Small Controlled Load Switch with uto-discharge Path The NCP2 and NCP are a low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy.
More informationMC33039, NCV33039. Closed Loop Brushless Motor Adapter
MC3339, NCV3339 Closed Loop Brushless Motor Adapter The MC3339 is a high performance closedloop speed control adapter specifically designed for use in brushless DC motor control systems. Implementation
More informationBSP52T1 MEDIUM POWER NPN SILICON SURFACE MOUNT DARLINGTON TRANSISTOR
Preferred Device This NPN small signal darlington transistor is designed for use in switching applications, such as print hammer, relay, solenoid and lamp drivers. The device is housed in the SOT-223 package,
More informationSTF202-22. USB Filter with ESD Protection
STF202-22 USB Filter with ESD Protection This device is designed for applications requiring Line Termination, EMI Filtering and ESD Protection. It is intended for use in upstream USB ports, ellular phones,
More informationAND9015. A Solution for Peak EMI Reduction with Spread Spectrum Clock Generators APPLICATION NOTE. Prepared by: Apps Team, BIDC ON Semiconductor
A Solution for Peak EMI Reduction with Spread Spectrum Clock Generators Prepared by: Apps Team, BIDC ON Semiconductor APPLICATION NOTE Introduction This application note will outline Spread Spectrum Clock
More information120 V AC, Low Cost, Dimmable, Linear, Parallel to Series LED Driving Circuit http://onsemi.com
120 V AC, Low Cost, Dimmable, Linear, Parallel to Series LED Driving Circuit DESIGN NOTE Table 1. DEVICE DETAILS Device Application Topology Input Voltage Input Power Power Factor THD NSIC2030B LED Lighting
More informationAND8480/D. CrM Buck LED Driver Evaluation Board APPLICATION NOTE
CrM Buck LED Driver Evaluation Board Prepared by: Fabien Franc ON Semiconductor Introduction This document describes the CrM Buck LED driver evaluation board. This board provides a step down converter
More informationP D 215 1.25 Operating Junction Temperature T J 200 C Storage Temperature Range T stg 65 to +150 C
SEMICONDUCTOR TECHNICAL DATA Order this document by /D The RF Line The is designed for output stages in band IV and V TV transmitter amplifiers. It incorporates high value emitter ballast resistors, gold
More information8-bit binary counter with output register; 3-state
Rev. 3 24 February 2016 Product data sheet 1. General description The is an 8-bit binary counter with a storage register and 3-state outputs. The storage register has parallel (Q0 to Q7) outputs. The binary
More information3-to-8 line decoder, demultiplexer with address latches
Rev. 7 29 January 2016 Product data sheet 1. General description The is a high-speed Si-gate CMOS device and is pin compatible with low-power Schottky TTL (LSTTL). The is specified in compliance with JEDEC
More information1SMB5.0AT3G Series, SZ1SMB5.0AT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional
1SMBAT3G Series, SZ1SMBAT3G Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional The SMB series is designed to protect voltage sensitive components from high voltage, high energy
More informationNCN4555MNR2G. 1.8V / 3V SIM Card Power Supply and Level Shifter
N. / SIM Card Power Supply and Level Shifter The N is a level shifter analog circuit designed to translate the voltages between a SIM Card and an external microcontroller or MPU. A built in LDO type DC
More information74HC02; 74HCT02. 1. General description. 2. Features and benefits. Ordering information. Quad 2-input NOR gate
Rev. 5 26 November 2015 Product data sheet 1. General description 2. Features and benefits The is a quad 2-input NOR gate. Inputs include clamp diodes. This enables the use of current limiting resistors
More informationHEF4011B. 1. General description. 2. Features and benefits. 3. Ordering information. 4. Functional diagram. Quad 2-input NAND gate
Rev. 6 10 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad 2-input NAND gate. The outputs are fully buffered for the highest noise
More informationCAN Bus Transceivers Operate from 3.3V or 5V and Withstand ±60V Faults
CAN Bus Transceivers Operate from 3.3V or 5V and Withstand ±6 Faults Ciaran Brennan design features The LTC2875 is a robust CAN bus transceiver that features ±6 overvoltage and ±25kV ESD tolerance to reduce
More informationCAN bus ESD protection diode
Rev. 04 15 February 2008 Product data sheet 1. Product profile 1.1 General description in a small SOT23 (TO-236AB) Surface-Mounted Device (SMD) plastic package designed to protect two automotive Controller
More information