VALVES ISO 99/1, SERIES IPV-ISV The assembly surface dimensions of ISO1, ISO2 and ISO 3 valves are to ISO99-1. They are available in the -way versions with 2 and 3 positions and with pneumatic or solenoid actuation. TECHNICAL DATA Fluid Operating pressure: pilot-assisted Minimum pilot pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar Installation Assembly Recommended lubricant Solenoid pilot: Manual: Maximum torque nut/coil Compatibility with oils: ISO 1 ISO 2 ISO 3 Filtered air without lubrication; lubrication, if used, must be continuous Vacuum 10 bar pneumatic 2. 10 bar solenoid/pneumatic Vacuum 10 bar pneumatic 1 10 bar solenoid/pneumatic Vacuum 10 bar 2. bar -10 +60 C 7. mm 12 mm 1 mm 20 Nl/min bar 67.1 Nl/min bar 971.3 Nl/min bar 0.36 bar/bar 0.2 bar/bar 0.3 bar/bar 700 Nl/min 100 Nl/min 3200 Nl/min 1100 Nl/min 2700 Nl/min 600 Nl/min In any position (vertical assembly is not recommended for bistable valves subjected to vibration) On single and manifold bases according to ISO 99/1 ISO and UNI FD 22 to CNOMO / in-line pilot / M12 to CNOMO bistable on solenoid pilot monostable on valve body see GENERAL CATALOGUE page 6.1/0 or webpage www.metalwork.it/eng/materiali_compatibilita.html COMPONENTS VALVE BODY: Aluminium END CAP: HOSTAFORM SPOOL: chemically nickel-plated aluminium DISTANCE PLATES: plastic GASKETS: NBR nitrile rubber PISTONS: HOSTAFORM PISTON GASKETS: NBR nitrile rubber FILTER: sintered bronze SPRINGS: special steel OPERATOR: Brass pipe Stainless steel core 1
FLOW CHARTS ISO 1 ISO 1 ISO 2 FLOW RATES (Nl/min) FLOW RATES (Nl/min) 000 7000 6000 000 000 3000 2000 1000 PRESSURE (bar) 0 0 1 2 3 6 7 9 10 11 PRESSURE (bar) ISO 3 FLOW RATES (Nl/min) 12000 11000 10000 9000 000 7000 6000 000 000 3000 2000 1000 0 0 1 2 3 6 7 9 10 PRESSURE (bar) KEY TO CODES I P V P N S O O FAMILY PORT FUNCTION OPERATORS 1 RESETTING 12 FURTHER DETAILS IPV ISV ISO pneumatic ISO solenoid/ pneumatic ISO 1 6 ISO 2 7 ISO 3 /2 6 /3 PN pneumatic SO solenoid/pneumatic SE electric pilot-assisted DO solenoid/pneumatic in line DE solenoid, assisted in line CO M12 solenoid/pneumatic CE M12 solenoid assisted S B D mechanical spring bistable differential OO /2 CC closed centres OC open centres PC pressure centres only fo ISO 1 and ISO 2 2
VALVES ISO 99/1, PNEUMATIC SERIES IPV TECHNICAL DATA Operating pressure Minimum operation pressure: Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar Response times at 6 Bar: Repositioning response times at 6 Bar: Manual ISO 1 ISO 2 Vacuum 10 bar ISO 3 2. bar 1 bar -10 to 60 C 7. mm 12 mm 1 mm 20 Nl/min bar 67.1 Nl/min bar 971.3 Nl/min bar 0.36 bar/bar 0.2 bar/bar 0.3 bar/bar 700 Nl/min 100 Nl/min 3200 Nl/min 1100 Nl/min 2700 Nl/min 600 Nl/min 12 ms 2 ms 3 ms 20 ms 30 ms ms 30 ms 3 ms ms 20 ms 30 ms ms monostable on valve body PNEUMATIC ACTUATION ISO 1 IPV PNS OO 701011100 IPV PNB OO 701011200 2 36 120 IPV PND OO IPV 6 PNS CC 701011300 701012100 0 IPV 6 PNS OC 701012200 IPV 6 PNS PC 701012300 PNEUMATIC ACTUATION ISO 2 IPV 6 PNS OO 702011100 70 IPV 6 PNB OO 702011200 70 ISO 99 Size 2 max 10 bar -10 +60 C 2 6 0 IPV 6 PND OO 702011300 70 10 10 M6 IPV 66 PNS CC 702012100 70 IPV 66 PNS OC 702012200 70 IPV 66 PNS PC 702012300 70 3
PNEUMATIC ACTUATION ISO 3 Abbrev IPV 7 PNS OO 706011100 117 1 10 ISO 99 Size 3 max 10 bar -10 +60 C 16 (for /2) M IPV 7 PNB OO IPV 7 PND OO 706011200 706011300 117 117 10 (for /3) 6 IPV 76 PNS CC 706012100 1290 IPV 76 PNS OC 706012200 1290 6 IPV 76 PNS PC 706012300 1290 NOTES
VALVES ISO 99/1, SOLENOID/PNEUMATIC, SERIES ISV TECHNICAL DATA Operating pressure: pilot-assisted Minimum pilot pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar TRA / TRR monostable at 6 Bar TRA / TRR bistable at 6 Bar Solenoid pilot: Manual: Coils: Maximum torque coil/nut ISO 1 ISO 2 ISO 3 2. 10 bar 1 10 bar Vacuum 10 bar 2. bar -10 to 60 C 7. mm 12 mm 1 mm 20 Nl/min bar 67.1 Nl/min bar 971.3 Nl/min bar 0.36 bar/bar 0.2 bar/bar 0.3 bar/bar 700 Nl/min 100 Nl/min 3200 Nl/min 1100 Nl/min 2700 Nl/min 600 Nl/min 2 ms / 0 ms 39 ms / 60 ms 0 ms / 120 ms 20 ms / 20 ms 2 ms / 2 ms 3 ms / 3 ms Standards CNOMO bistable on solenoid pilot monostable on valve body 30mm side DIN 360 Form A ISO 22 mm side MONOSTABLE /2 ISO 1 139 ISV SOS OO 701021100 3 ISV SES OO 70102100 3 6 1 36 120 0 MONOSTABLE /2 ISO 2 16 ISV 6 SOS OO 702021100 71 ISV 6 SES OO 70202100 71 2 ISO 99 Size 2 max 10 bar -10 +60 C M6 10 2 6 10 0
MONOSTABLE /2 ISO 3 17 ISV 7 SOS OO 706021100 1207 ISV 7 SES OO 70602100 1207 BISTABLE /2 ISO 1 MONOSTABLE /3 ISO 1 ISO 99 Size 3 max 10 bar -10 +60 C 10 60 16 6 6 7 M ISV SOB OO 701021200 3 ISV SOD OO 701021300 37 1 ISV 6 SOS CC 701022100 ISV 6 SOS OC 701022200 6 1 ISV 6 SOS PC 701022300 36 ISV SEB OO 70102100 3 120 ISV SED OO 701021600 37 0 ISV 6 SES CC 70102200 ISV 6 SES OC 70102200 ISV 6 SES PC 701022600 6
BISTABLE /2 ISO 2 MONOSTABLE /3 ISO 2 Abbrev ISV 6 SOB OO 702021200 70 ISV 6 SOD OO 702021300 710 17 ISV 66 SOS CC 702022100 ISV 66 SOS OC 702022200 2 6 10 0 ISO 99 Size 2 max 10 bar -10 +60 C M6 10 ISV 66 SOS PC ISV 6 SEB OO ISV 6 SED OO 702022300 70202100 702021600 70 710 2 ISV 66 SES CC 70202200 ISV 66 SES OC 70202200 ISV 66 SES PC 702022600 BISTABLE /2 ISO 3 MONOSTABLE /3 ISO 3 Abbrev ISV 7 SOB OO 706021200 1230 1 ISV 7 SOD OO 706021300 1230 ISV 76 SOS CC 706022100 7 60 ISV 76 SOS OC 706022200 ISO 99 Size 3 max 10 bar -10 +60 C 10 M ISV 76 SOS PC 706022300 16 (for /2) 10 (for /3) ISV 7 SEB OO 70602100 1230 6 ISV 7 SED OO 706021600 1230 6 ISV 76 SES CC 70602200 ISV 76 SES OC 70602200 ISV 76 SES PC 706022600 7
VALVES ISO 99/1, PNEUMATIC, SERIES ISV WITH IN-LINE SOLENOID PILOT TECHNICAL DATA Operating pressure: pilot-assisted Minimum pilot pressure Operating temperature range Nominal diameter Conductance C Critical ratio b Flow rate at 6 Bar ΔP 0. Bar Flow rate at 6 Bar ΔP 1 Bar TRA / TRR monostable at 6 Bar TRA / TRR bistable at 6 Bar Solenoid pilot: Manual: Coils: Maximum torque coil/nut ISO 1 2.-10 bar 1-10 bar Vacuum 10 bar 2. bar -10 to 60 C 7. mm 20 Nl/min bar 0.36 bar/bar 700 Nl/min 1100 Nl/min 2 ms / 0 ms 0 ms / 0 ms In line pilot bistable on solenoid pilot 30mm side DIN 360 Form A ISO 22 mm side MONOSTABLE /2 ISO 1 13. ISV DOS OO 703021100 396 ISV DES OO 70302100 396 2 36. 19. 120 0 BISTABLE /2 ISO 1 17. ISV DOB OO 703021200 0 ISV DEB OO 70302100 0 2 36. 19. 120 0
MONOSTABLE /3 ISO 1 20. ISV 6 DOS CC 703022100 17 ISV 6 DOS OC 703022200 16 2 36. 19. ISV 6 DOS PC 703022300 16 0 137 ISV 6 DES CC 70302200 17 ISV 6 DES OC 70302200 16 ISV 6 DES PC 703022600 1 NOTES 9
COILS AND CONNECTORS FOR ISO 99/1 SOLENOID VALVES SERIES ISV COILS SIDE 22 mm FOR ISO 99/1 SOLENOID VALVES ø.2 M3 11 17 2 2 29.2 ø1. 22.2 6 1.6. Voltage tolerance: -10% + 1% Insulation class: F1 Degree of protection: IP6 EN6029 with connector Avoid prolonged exposure to the atmospheric agents Coil temperature 100% ED: 70 C at 20 C Ambient temperature According to Atex 9/9 CE rule, group 2, category 3 GD Nominal voltage Absorption Inrush Holding 12Vcc 2Vcc 2V 0/60Hz 110V 0/60Hz 220V 0/60Hz 2W 2W.3VA.3VA.3VA 2W 2W 3.VA 3.VA 3.VA Coil 22 Ø BA 2W-12VDC Coil 22 Ø BA 2W-2VDC Coil 22 Ø BA 3.VA-2VAC Coil 22 Ø BA 3.VA-110VAC Coil 22 Ø BA 3.VA-220VAC W02100011 W021000101 W021000111 W021000121 W021000131 COILS SIDE 30 mm 2 ø16 ø16.3 ø.2 21. 36 27 30 30 19 9 M3 1 electric contact DIN360 shape A ISO 00 Voltage tolerance: -10% + 10% Insulation class: F1 Degree of protection: IP6 EN6029 with connector Avoid prolonged exposure to the atmospheric agents According to Atex 9/9 CE rule, group 2, category 3 GD Nominal voltage Absorption Inrush Holding 2Vcc 2V 0/60Hz 110V 0/60Hz 220V 0/60Hz W 10VA 10VA 10VA W VA VA VA Coil 30 Ø W-2VDC Coil 30 Ø VA-2VAC Coil 30 Ø VA-110VAC Coil 30 Ø VA-220VAC W0210010100 W0210011100 W0210012100 W0210010 CONNECTOR FOR COILS SIDE 22 mm ~31 M3 1. ~2 ~ 6. Pg9 21 11 2 Colour Black Ø Cable Type Standard LED 2V LED 110V LED 220V LED + VDR 2V LED + VDR 110V LED + VDR 220V W097010011 W097010012 W097010013 W09701001 W09701001 W097010016 W097010017 CONNECTOR FOR COILS SIDE 30 mm ~30. M3 1. ~27 ~9 2 9 Pg9 2 1 Colour Black Ø Cable Type Standard LED 2V LED 110V LED 220V LED + VDR 2V LED + VDR 110V LED + VDR 220V W097020033 W09702003 W09702003 W097020036 W097020037 W09702003 W097020039 KIT COIL EEXM 29. 30 ø.2 ø9.2 1. 66. 12 0227606913 022760691 022760013 02276001 022760023 02276002 022760033 02276003 Description KIT FOR COIL 30 2 VDC EEXMT CABLE 3M KIT FOR COIL 30 2 VDC EEXMT CABLE M KIT FOR COIL 30 2 VAC EEXMT CABLE 3M KIT FOR COIL 30 2 VAC EEXMT CABLE M KIT FOR COIL 30 110 VAC EEXMT CABLE 3M KIT FOR COIL 30 110 VAC EEXMT CABLE M KIT FOR COIL 30 230 VAC EEXMT CABLE 3M KIT FOR COIL 30 230 VAC EEXMT CABLE M according to Atex 9/9 CE rule, group 2, category 2 GD KIT COILS SIDE 22 IP6 Description 0222100100 KIT FOR COILS 22 - IP6 Improved IP6 protection, even after prolonged exposure to atmospheric agents. Applicable to valves with a technopolymer control. 10