aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Catalog 095 ENGINEERING YOUR SUCCESS.
Warning, Offer of Sale! WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users h aving technical expertise. It is important that you analyze all aspects of your application including consequences of any failure, and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated on the separate page of this document entitled Offer of Sale. Copyright 008 Parker Hannifin Corporation. All Rights Reserved Parker Hannifin Corporation
Index Table of Contents Solenoid Valves - 3/-way 1/8... page -3-3/-way 1/4... page 4-5 - 3/-way 1/... page 6-7 - 5/-way 1/8, 1/4, 1/... page 8-11 Air Pilot Valves - 5/-way 1/8... page - 5/-way 1/4... page 13 Hand Lever Valves - 3/ & 5/-way 1/8... page -15-3/ & 5/-way 1/4... page 16-17 - 3/ & 5/-way 1/... page 18-19 - 5/3-way 1/8... page 0-1 - 5/3-way 1/4... page -3-5/3-way 1/... page 4 Interference Sensing Module - 5/-way... page 5 ISO Valves- Size 1... page 6-7 - Size... page 8-9 - Size 3... page 30-31 - Order Instructions... page 3-33 NAMUR Valves - 5/-way 1/8... page 34-35 - 5/-way 1/4... page 36-37 Two-Hand Safety Valves - 5/-way 1/8... page 38-5/-way 1/4... page 39 Oscillating Valves - 5/-way 1/4... page 40-41 Foot Pedal Valves - 3/-way 1/4... page 4-43 - 5/-way 1/4... page 44-45 Valve Mountings - Barstock Manifold 1/8... page 46 - Barstock Manifold 1/4... page 47 - ISO Subbase (1,, 3)... page 48-49 Spare Parts/Accessories... page 50 Safety Guide... page 54-55 Offer of Sale... page 56 Discontinued 1 Parker Hannifin Corporation
Characteristics Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M6 (M3) Tube connection Thread Port size NPT (G) 1/8 Weight (mass) lbs. (kg).54 (0.47) Single solenoid.84 (0.38) Double solenoid Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure Single solenoid range p min psi (bar) 9 () p max 5 (10) Double solenoid p min psi (bar) (1.5) p max 5 (10) Nominal flow Q N Cv (I/min).45 (450) Actuation Electrical Pilot operated Voltage AC DC Nominal voltage* Standard version U n V 0 4 Initial power consumption Standard version VA (W) 8.5.5 Continuous consumption Standard version VA (W) 6.0.5 Duty cycle ED % Continuous Duty Electrical protection IP65 to DIN 40050 (with plug) Insulating material VDE 0580 Connection Plug to DIN 43650 form B 1) We recommend the use of mineral oil type VG3 to ISO 3448 3/-Way Valve, 1/8 Inch Note: When using below freezing point it is necessary to consult factory. 3/-Way Valve 1/8 Actuation: Solenoid - Single Solenoid - Double Solenoid Parker Hannifin Corporation
Dimensions & Ordering Information 3/-Way Valve, 1/8 Inch Dimensions (mm) 8 5 3, 5,6 69,5 37 18 10,5 M5 ca. 110 4 33,5 (10) pst 3(1) 1(3) pst G1/8 G1/8 4,5 4,5 36 ca.190 16,6 15,5 10 () 5,5 56 5 15,5 40 63 Version 1/8 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 10 3/ Single Solenoid/Spring Return S9 381RF-1/8-NG-.. PA 1097-..33 S9 381RF-1/8U-NG-.. PD 4395-..33 10 3/ Single Solenoid/Spring Return S9 381RF-1/8-NO-.. PA 1098-..33 S9 381RF-1/8U-NO-.. PD 45459-..33 10 1 3 1 3 3/ Double Solenoid S9 381-1/8-.. PA 1099-..33 S9 381-1/8U-.. PD 45460-..33 1 3 Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ 3674 01 4 vdc 60 50/60Hz KZ 3673 0 110 50/60Hz 48 vdc KZ 3669 57 0 50/60Hz 110 vdc KZ 367 61 4 50/60Hz -- KZ 3675 51 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. 3 Parker Hannifin Corporation
Characteristics Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M6 (M4) Tube connection Thread Port size NPT (G) 1/4 Weight (mass) lbs. (kg) 1.1 (0.5) Single solenoid 1.3 (0.6) Double solenoid Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure Single solenoid range p min psi (bar) 9 () p max 5 (10) Double solenoid p min psi (bar) (1.5) p max 5 (10) Nominal flow Q N Cv (I/min) 1.3 (1300) Actuation Electrical Pilot operated Voltage AC DC Nominal voltage* Standard version U n V 0 4 Initial power consumption Standard version VA (W) 8.5.5 Continuous consumption Standard version VA (W) 6.0.5 Duty cycle ED % Continuous Duty Electrical protection IP65 to DIN 40050 (with plug) Insulating material VDE 0580 Connection Plug to DIN 43650 form B 1) We recommend the use of mineral oil type VG3 to ISO 3448 3/-Way Valve, 1/4 Inch Note: When using below freezing point it is necessary to consult factory. 3/-Way Valve 1/4 Actuation: Solenoid - Single Solenoid - Double Solenoid 4 Parker Hannifin Corporation
41 Catalog 095 Dimensions & Ordering Information 3/-Way Valve, 1/4 Inch Dimensions (mm) 3 *** ca. 09 ca.137 84 0 8,5 10 6 6 M5 47 G 1/4 3(1) 1(3) 6,5 6 (10) pst pst 10 () G 1/8 o 4, 4,5 o 7,5 5 44 30 11 5,5 5 15,5 5 63 Version 1/4 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 3/ Single Solenoid/Spring Return S9 381RF-1/4-NG-.. PA 716-..33 S9 381RF-1/4U-NG-.. PD 45461-..33 10 1 3 3/ Single Solenoid/Spring Return S9 381RF-1/4-NO-.. PA 717-..33 S9 381RF-1/4U-NO-.. PD 4546-..33 1 3 10 3/ Double Solenoid S9 381-1/4-.. PA 718-..33 S9 381-1/4U-.. PD 45463-..33 1 3 10 Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ 3674 01 4 vdc 60 50/60Hz KZ 3673 0 110 50/60Hz 48 vdc KZ 3669 57 0 50/60Hz 110 vdc KZ 367 61 4 50/60Hz -- KZ 3675 51 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. 5 Parker Hannifin Corporation
Characteristics Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M6 Tube connection Thread Port size NPT (G) 1/ Weight (mass) lbs. (kg) 1.69 (0.77) Single solenoid 1.3 (0.60) Double solenoid Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure Single solenoid range p min psi (bar) 9 () p max 5 (10) Double solenoid p min psi (bar) (1.5) p max 5 (10) Nominal flow Q N Cv (I/min) 3.5 (3500) Actuation Electrical Pilot operated Voltage AC DC Nominal voltage* Standard version U n V 0 4 Initial power consumption Standard version VA (W) 11 4.8 Continuous consumption Standard version VA (W) 8.5 4.8 Duty cycle ED % Continuous Duty Electrical protection IP65 to DIN 40050 (with plug) Insulating material VDE 0580 Connection Plug to DIN 43650 form B 1) We recommend the use of mineral oil type VG3 to ISO 3448 3/-Way Valve, 1/ Inch Note: When using below freezing point it is necessary to consult factory. 3/-Way Valve 1/ Actuation: Solenoid - Single Solenoid - Double Solenoid 6 Parker Hannifin Corporation
Dimensions & Ordering Information 3/-Way Valve, 1/ Inch Dimensions (mm) 1 70 68 40,5 G1/8 39 57 pst 9 73 3 46 167 158 117 68 3 1 G1/ 7 10 9 pst 70 6,5 Version 1/ Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 10 1 3 1 3 10 1 3 10 3/ Single Solenoid/Spring Return S9 381RF-1/-NG-.. PA 164-..33 S9 381RF-1/U-NG-.. PD 45464-..33 3/ Single Solenoid/Spring Return S9 381RF-1/-NO-.. PA 16413-..33 S9 381RF-1/U-NO-.. PD 45465-..33 3/ Double Solenoid S9 381-1/-.. PA 164-..33 S9 381-1/U-.. PD 45466-..33 Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ 3518 01 4 vdc 60 50/60Hz KZ 3519 0 110 50/60Hz 48 vdc KZ 351 57 0 50/60Hz 110 vdc KZ 35 61 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. 7 Parker Hannifin Corporation
Characteristics 5/-Way & 5/3-Way Valve, 1/8, 1/4, 1/ Inch Features Type Spool Valve Mounting Screws Port connection Threaded Port size G/NPT 1/8 1 /4 1 / In Any Position Ambient min F (-10 C) Note: temperature range max 0 F (+60 C) When using below freezing min F (-10 C) point it is necessary to temperature range max 158 F (+70 C) consult factory. Filtered Compressed Air Lubrication With or Without Oil Mist Lubrication 1) Body 5/ Position 5/3 Position Size Single Double Double 1/8 Minimum Pressure psi (bar) 9 () (1.5) 9 () Maximum Pressure psi (bar) 5 (10) 5 (10) 5 (10) Flow Cv (l/min) 0.5 (500) 0.5 (500) 0.6 (600) Weight lbs. (kg) 0.6 (0.8) 0.91 (0.415) 0.94 (0.45) 1/4 Minimum Pressure psi (bar) 9 () (1.5) 9 () Maximum Pressure psi (bar) 5 (10) 5 (10) 5 (10) Flow Cv (l/min) 1.3 (1300) 1.3 (1300) RFG,RFB:1.3(1300) RFE:1.0 (1000) Weight lbs. (kg) 1.3 (0.6) 1.54 (0.7) 1.54 (0.7) 1/ Minimum Pressure psi (bar) 3 (.) (1.5) 36 (.5) Maximum Pressure psi (bar) 5 (10) 5 (10) 5 (10) Flow Cv (l/min) 3.5 (3500) 3.5 (3500) RFE:3.3 (3300) RFG:3.5 (3500) RFB:3.6 (3600) Weight lbs. (kg). (1.0).43 (1.1).43 (1.1) Voltage AC DC Nominal Standard Version V 4, 110, 0, 4 Voltage Others Contact Factory Power Consumption Inrush Body Size: 1/8 1/4 Body Size: 1/ AC DC AC DC 50 HZ 60 HZ 50 HZ 60 HZ.8 W 10.4VA 10.4VA 4.5 W 4 8.5VA 8.5VA.5 W 10.4VA 10.4VA 4.5 W 110 8.5VA 8.5VA.7 W 10.4VA 10.4VA 5.5 W 0 8.5VA 8.5VA 3.5 W 10.4VA 10.4VA 4.9 W Holding Body Size: 1/8 1/4 Body Size: 1/ AC DC AC DC 50 HZ 60 HZ 50 HZ 60 HZ.8 W 8.5VA 8.5VA 4.5 W 4 6.0VA 6.0VA.5 W 8.5VA 8.5VA 4.5 W 110 6.0VA 4.9VA.7 W 8.VA 6.6VA 5.5 W 0 6.0VA 4.9VA 3.5 W 8.5VA 6.9VA 4.9 W Duty cycle ED % Continuous Duty Electrical protection IP65 to DIN 40050 (with plug) Installing material VDE 0580 Connection Plug to DIN 43650 Form B 5/-Way Valve 5/3-Way Valve 1/8 1/4 1/ Actuation: Solenoid - Single Solenoid - Double Solenoid 1) We recommend the use of mineral oil type VG3 to ISO 3448 8 Parker Hannifin Corporation
Dimensions & Ordering Information 5/-Way & 5/3-Way Valve, 1/8, 1/4, 1/ Inch VERSION 1/8 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/ Single Solenoid/Spring Return S9 581RF-1/8-.. PA 103-..33 S9 581RF-1/8 U-.. PD 40663-..33 5 13 5/ Double Solenoid S9 581-1/8-.. PA 10313-..33 S9 581-1/8 U-.. PD 40664-..33 5/3 Double Solenoid/Center Blocked S9 581RFG-1/8-.. PA 10333-..33 S9 581RFG-1/8 U-.. PD 40736-..33 5/3 Double Solenoid/Center Exhaust S9 581RFE-1/8-.. PA 10334-..33 S9 581RFE-1/8 U-.. PD 40737-..33 5/3 Double Solenoid/Dual Center S9 581RFB-1/8-.. PA 10335-..33 S9 581RFB-1/8 U-.. PD 40738-..33 VERSION 1/4 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/ Single Solenoid/Spring Return S9 581RF-1/4-.. PA 679-..33 S9 581RF-1/4 U-.. PD 40665-..33 5 13 5/ Double Solenoid S9 581-1/4-.. PA 680-..33 S9 581-1/4 U-.. PD 40666-..33 5/3 Double Solenoid/Center Blocked S9 581RFG-1/4-.. PA 705-..33 S9 581RFG-1/4 U-.. PD 40739-..33 5/3 Double Solenoid/Center Exhaust S9 581RFE-1/4-.. PA 706-..33 S9 581RFE-1/4 U-.. PD 40740-..33 5/3 Double Solenoid/Dual Center S9 581RFB-1/4-.. PA 707-..33 S9 581RFB-1/4 U-.. PD 40741-..33 Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ 3674 01 4 vdc 60 50/60Hz KZ 3673 0 110 50/60Hz 48 vdc KZ 3669 57 0 50/60Hz 110 vdc KZ 367 61 4 50/60Hz -- KZ 3675 51 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. VERSION 1/ Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/ Single Solenoid/Spring Return S9 581RF-1/-.. PA 16171-..33 S9 581RF-1/U-.. PD 37950-..33 5 13 5/ Double Solenoid S9 581-1/-.. PA 1617-..33 S9 581-1/U-.. PD 37951-..33 5/3 Double Solenoid/Center Blocked S9 581RFG-1/-.. PA 16176-..33 S9 581RFG-1/U-.. PD 37971-..33 5/3 Double Solenoid/Center Exhaust S9 581RFE-1/-.. PA 16177-..33 S9 581RFE-1/U-.. PD 3797-..33 5/3 Double Solenoid/Dual Center S9 581RFB-1/-.. PA 16178-..33 S9 581RFB-1/U-.. PD 37973-..33 Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ 3518 01 4 vdc 60 50/60Hz KZ 3519 0 110 50/60Hz 48 vdc KZ 351 57 0 50/60Hz 110 vdc KZ 35 61 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. 9 Parker Hannifin Corporation
G Catalog 095 Dimensions 5/-Way & 5/3-Way Valve, 1/8 & 1/4 Inch Sizes: 1/8 & 1/4 Y X AD AC N 5 4 AB 1 H L AA H 3 O K F T M Z pst H U ** A B C D E AE AG AH pst J W * *- Manual Override Push: Non-Locking Push & Turn: Locking S R P A B C D E F G H J K L M N O P 8.19 5.51 5.04 3.4.19 0.94 1.3 0.71.0 0.61.13 0.96 1.67 0..48 1/8 08 0 8 87.5 55.5 4 33.5 18 56 15.5 54.5 4.5 5.5 63 9.09 6.6 5.83 4.17.64 1.16 1.61 0.87.44 0.79.60 1.18.05 0.6.48 1/31 159 8 106 67 9.5 41 6 0 66 30 5 6.5 63 R S T U W X Y Z AA AB AC AD AE AF AG 1.57 0.61 1/8 npt 1/8 npt 0.0 - - 0.87 0.65 0.31 0.0 M5 0.41 - - 0.13 0. 1/8 40 15.5 G 1/8 G 1/8 5 - - 16.6 8 5 M5 10.5 - - 3. 5.6.05 0.61 1/8 npt 1/4 npt 0.4 0.87 1.6 0.98 0.43 0. M5 0.39 - - - - - - 1/4 5 15.5 G 1/8 G 1/4 6 3 5 11 5.5 M5 10 - - - -- - - Dimensions: BOLD= Inches; STANDARD= mm 10 Parker Hannifin Corporation
Dimensions 5/-Way & 5/3-Way Valve, 1/ Inch Size: 1/ R P Y S X F G M T pst K N A B C D E H H ** L W 5 O 1 4 U H 3 K pst J ** *- Manual Override Push: Non-Locking Push & Turn: Locking A B C D E F G H J K L M N O P 11. 7.93 7.48 5.87 3.94 1.5.4 1.6.76 1. - - 0.49.87 0.8.68 1/ 83 01.5 190 9 100 39 57 3 70 9 - -.5 73 7 68 R S T U W X Y Z AA AB AC AD AE AF AG.76 0.83 1/8 npt 1/ npt 0.6 0.87 1.57 - - - - - - - - - - - - - - - - 1/ 70 1 G 1/8 G 1/ 6.5 40 - - - - - - - - - - - - - - - - Dimensions: BOLD= Inches; STANDARD= mm 11 Parker Hannifin Corporation
Characteristics & Dimensions Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M5 Tube connection Thread Port size NPT (G) 1/8 Weight (mass) lbs. (kg).35 (.160) Single Air Pilot.37 (.170) Double Air Pilot Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Air Pilot Direct Actuation Pressure p min psi (bar) 30 () Range p max 5 (10) Single Air Pilot p min psi (bar) (1.5) p max 5 (10) Double Air Pilot 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way Valve, 1/8 Inch Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 1/8 Actuation: Air Pilot - Single Air Pilot - Double Air Pilot Dimensions (mm) 16 6 17 3, 5,6 18 5 4 35 8 5 80 55,5 18 1 3 G1/8 4 18 54 8 16,6 5,5 5 only for type S9 561-1/8 40 Version 1/8 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 5/ Single Air Pilot/Spring Return S9 561RF-1/8 PA 10310 S9 561RF-1/8U PD 4740 5/ Double Air Pilot S9 561-1/8 PA 10311 S9 561-1/8U PD 4739 Parker Hannifin Corporation
Characteristics & Dimensions Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M5 Tube connection Thread Port size NPT (G) 1/8 Weight (mass) lbs. (kg) 1.08 (.49) Single Air Pilot 1. (.51) Double Air Pilot Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 1.3 (1300) Actuation Air Pilot Direct Actuation Pressure p min psi (bar) 30 () Range p max 5 (10) Single Air Pilot p min psi (bar) (1.5) p max 5 (10) Double Air Pilot 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way Valve, 1/4 Inch Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 1/4 Actuation: Air Pilot - Single Air Pilot - Double Air Pilot Dimensions (mm) 5 111 98,5 67 33,5,5 G1/4 5 1 4 o 4, G1/8 o 7,5,5 66 44,5 11 5,5 3 4,5,5 6,5 6 only for type S9 561-1/4 S9 56-1/4 3 5 Version 1/4 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 5/ Single Air Pilot/Spring Return S9 561RF-1/4 PA 676 S9 561RF-1/4U PD 474 5/ Double Air Pilot S9 561-1/4 PA 677 S9 561-1/4U PD 4741 13 Parker Hannifin Corporation
Characteristics & Dimensions 3/-Way Valve, 1/8 Inch Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M5 Tube connection Thread Port size NPT (G) 1/8 Weight (mass) lbs. (kg).356 (.16) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Note: When using below freezing point it is necessary to consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 131 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 4.5 (450) Actuation Manual control Direct Stroke in (mm).177 (4.5) Actuation force F b lbf (N) 1.57 (7) detent.5 (10) spring 3/-Way Valve 1/8 Actuation: Hand lever - Detent - Spring Return 1) We recommend the use of mineral oil type VG3 to ISO 3448 Dimensions (mm) 94 9 11,5 0 7 19 50 31,5 41 77 37 18 3 1 10 G1/8 5,5 5 40 Version 1/8 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 3/ Hand Lever/Detent S9 311-1/8 PA 1093 S9 311-1/8U PD 45467 3/ Hand Lever/Spring Return S9 311RF-1/8 PA 1094 S9 311RF-1/8U PD 45468 Parker Hannifin Corporation
Characteristics & Dimensions 5/-Way Valve, 1/8 Inch Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M5 Tube connection Thread Port size NPT (G) 1/8 Weight (mass) lbs. (kg).49 (.195) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Note: When using below freezing point it is necessary to consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Manual control Direct Stroke in (mm).177 (4.5) Actuation force F b lbf (N) 1.57 (7) detent.5 (10) spring 5/-Way Valve 1/8 Actuation: Hand lever - Detent - Spring Return 1) We recommend the use of mineral oil type VG3 to ISO 3448 Dimensions (mm) 94 8 0 7 19 31 41 50 11,5 5 G1/8 95 55,5 18 1 4 18 18 3 5,5 5 40 Version 1/8 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 5/ Hand Lever/Detent S9 511-1/8 PA 10308 S9 511-1/8U PD 45469 5/ Hand Lever/Spring Return S9 511RF-1/8 PA 10309 S9 511RF-1/8U PD 45470 15 Parker Hannifin Corporation
Characteristics & Dimensions 3/-Way Valve, 1/4 Inch Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M6 Tube connection Thread Port size NPT (G) 1/4 Weight (mass) lbs. (kg).81 (.37) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Note: When using below freezing point it is necessary to consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 1.3 (1300) Actuation Manual control Direct Stroke in (mm).56 (6.5) Actuation force F b lbf (N).5 (10) detent & safety detent 3.37 (15) spring 3/-Way Valve 1/4 Actuation: Hand lever - Detent - Spring Return - Safety Detent 1) We recommend the use of mineral oil type VG3 to ISO 3448 Dimensions (mm) 0 44 5 18 98 47 4,5 55 17 3 1 G1/4 66 10 6,5 3 6 5 Version 1/4 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 3/ Hand Lever/Detent S9 311-1/4 PA 708 S9 311-1/4U PD 45477 3/ Hand Lever/Spring Return S9 311RF-1/4 PA 709 S9 311RF-1/4U PD 45478 3/ Hand Lever/Detent (safety) S9 311S-1/4 PA 710 S9 311RF-1/4U PD 45479 16 Parker Hannifin Corporation 15
Characteristics & Dimensions 5/-Way Valve, 1/4 Inch Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M6 Tube connection Thread Port size NPT (G) 1/4 Weight (mass) lbs. (kg) 1. (.5) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Note: When using below freezing point it is necessary to consult factory. Filtered compressed air 5/-Way Valve 1/4 Actuation: Hand lever - Detent - Spring Return - Safety Detent Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 1.3 (1300) Actuation Manual control Direct Stroke in (mm).56 (6.5) Actuation force F b lbf (N).5 (10) detent 3.37 (15) spring 1) We recommend the use of mineral oil type VG3 to ISO 3448 Dimensions (mm) 44 0 5 18 43,5 55 17 66 5 0 4 67 G1/4 1 3 6,5 3 6 5 Version 1/4 Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 5/ Hand Lever/Detent S9 511-1/4 PA 671 S9 511-1/4U PD 45480 5/ Hand Lever/Spring Return S9 511RF-1/4 PA 67 S9 511RF-1/4U PD 45481 5/ Hand Lever/Detent (safety) S9 511S-1/4 PA 673 S9 511S-1/4U PD 4548 16 17 Parker Hannifin Corporation
Characteristics & Dimensions 3/-Way Valve, 1/ Inch Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M6 Tube connection Thread Port size NPT (G) 1/ Weight (mass) lbs. (kg) 1.98 (.9) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Note: When using below freezing point it is necessary to consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 3.5 (3500) Actuation Manual control Direct Stroke in (mm).370 (9.4) Actuation force F b lbf (N) 3.37 (15) detent 8.99 (40) spring 3/-Way Valve 1/ Actuation: Hand lever - Detent - Spring Return 1) We recommend the use of mineral oil type VG3 to ISO 3448 Dimensions (mm) 57 34 17 10 57 75 5 91 135 1 68 3 G1/ 3 10 7 40 6,5 151 70 Version 1/ Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 3/ Hand Lever/Detent S9 311-1/ PA 16404 S9 311-1/U PD 4549 3/ Hand Lever/Spring Return S9 311RF-1/ PA 16405 S9 311RF-1/U PD 45493 18 Parker Hannifin Corporation 17
Characteristics & Dimensions 5/-Way Valve, 1/ Inch Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M6 Tube connection Thread Port size NPT (G) 1/ Weight (mass) lbs. (kg).64 (1.0) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Note: When using below freezing point it is necessary to consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 3.5 (3500) Actuation Manual control Direct Stroke in (mm).370 (9.4) Actuation force F b lbf (N) 3.37 (15) detent 8.99 (40) spring 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way Valve 1/ Actuation: Hand lever - Detent - Spring Return Dimensions (mm) 57 34 17 0 57 75 5 91 167 100 3 3 G1/ 5 1 4 3 3 7 40 6,5 150 70 Version 1/ Metric Version NPT Version Actuation Type Number Order Number Type Number Order Number 5/ Hand Lever/Detent S9 511-1/ PA 16367 S9 511-1/U PD 45495 5/ Hand Lever/Spring Return S9 511RF-1/ PA 16366 S9 511RF-1/U PD 45494 19 Parker Hannifin Corporation
Characteristics 5/3-Way Valve, 1/8 Inch Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M5 Tube connection Thread Port size NPT (G) 1/8 Weight (mass) lbs. (kg).49 (.195) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Note: When using below freezing point it is necessary to consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Manual control Direct Stroke in (mm).177 (4.5) Actuating force F b lbf (N) G,E,B: 1.57 (7) RFG, RFE, RFB:.5 (10) 5/3-Way Valve 1/8 Actuation: Hand lever - Detent - Spring Center 1) We recommend the use of mineral oil type VG3 to ISO 3448 0 Parker Hannifin Corporation
Dimensions & Ordering Information 5/3-Way Valve, 1/8 Inch Dimensions (mm) 94 9 0 11,5 7 19 95 31 41 18 5 4 G1/8 48 55,5 18 1 18 3 5,5 5 40 Version 1/8 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/3-way Hand Lever/Detent; Blocked S9 511G-1/8 PA 1031 S9 511G-1/8U PD 45471 5/3-way Hand Lever/Detent; Exhausted S9 511E-1/8 PA 103 S9 511E-1/8U PD 4547 5/3-way Hand Lever/Detent; Dual S9 511B-1/8 PA 1033 S9 511B-1/8U PD 45473 5/3-way Hand Lever/Spring; Blocked S9 511RFG-1/8 PA 1034 S9 511RFG-1/8U PD 45474 5/3-way Hand Lever/Spring; Exhausted S9 511RFE-1/8 PA 1035 S9 511RFE-1/8U PD 45475 5/3-way Hand Lever/Spring; Dual S9 511RFB-1/8 PA 1036 S9 511RFB-1/8U PD 45476 1 Parker Hannifin Corporation
Characteristics 5/3-Way Valve, 1/4 Inch Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M6 Tube connection Thread Port size NPT (G) 1/4 Weight (mass) lbs. (kg) 1. (.5) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Note: When using below freezing point it is necessary to consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) RFG, RFB: 1.3 (1300) RFE: 1.0 (1000) Actuation Manual control Direct Stroke in (mm).56 (6.5) Actuating force F b lbf (N) G,E,B:.5 (10) RFG, RFE, RFB: 3.37 (15) 5/3-Way Valve 1/4 Actuation: Hand lever - Detent - Spring Center - Safety Detent 1) We recommend the use of mineral oil type VG3 to ISO 3448 Parker Hannifin Corporation
Dimensions & Ordering Information 5/3-Way Valve, 1/4 Inch Dimensions (mm) 1 44 * 44 5 18 17 5 43,5 55 66 5 0 4 67 G1/4 1 3 6,5 3 6 *Safety hand lever 5 Version 1/4 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/3-way Hand Lever/Detent; Blocked S9 511G-1/4 PA 687 S9 511G-1/4U PD 45483 5/3-way Hand Lever/Detent; Exhausted S9 511E-1/4 PA 688 S9 511E-1/4U PD 45484 5/3-way Hand Lever/Detent; Dual S9 511B-1/4 PA 689 S9 511B-1/4U PD 45485 5/3-way Hand Lever/Spring; Blocked S9 511RFG-1/4 PA 690 S9 511RFG-1/4U PD 45486 5/3-way Hand Lever/Spring; Exhausted S9 511RFE-1/4 PA 691 S9 511RFE-1/4U PD 45487 5/3-way Hand Lever/Spring; Dual S9 511RFB-1/4 PA 69 S9 511RFB-1/4U PD 45488 5/3-way Hand Lever/Detent; Blocked (safety) S9 511SG-1/4 PA 693 S9 511SG-1/4U PD 45489 5/3-way Hand Lever/Detent; Exhausted (safety) S9 511SE-1/4 PA 694 S9 511SE-1/4U PD 45490 5/3-way Hand Lever/Detent; Dual (safety) S9 511SB-1/4 PA 695 S9 511SB-1/4U PD 45491 3 Parker Hannifin Corporation
Characteristics & Dimensions Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M6 Tube connection Thread Port size NPT (G) 1/ Weight (mass) lbs. (kg).64 (1.0) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 3.5 (3500) Actuation Manual control Direct Stroke in (mm).370 (9.4) Actuating force F b lbf (N) 3.37 (15) 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/3-Way Valve, 1/ Inch Note: When using below freezing point it is necessary to consult factory. 5/3-Way Valve 1/ Actuation: Hand lever - Detent Dimensions (mm) 34 57 17 0 5 57 75 91 167 100 3 G1/ 5 1 4 3 3 3 7 40 6,5 151,5 70 Version 1/ Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/3-way Hand Lever/Detent; Blocked S9 511G-1/ PA 16369 S9 511G-1/U PD 45496 4 Parker Hannifin Corporation
Characteristics & Ordering Information 5/-Way Valve, 1/4 Inch Characteristics Unit Description Type Body ported valve Style Spool valve Port size G 1/4 Weight (mass) lbs. (kg) 1.43 (0.65) Ambient temperature minimum F ( C) (-10) maximum 0 (+60) temperature minimum F ( C) (-10) maximum 158 (+70) Air Nominal pressure psi (bar) 87 (6) Operating pressure minimum psi (bar) (1.5) maximum 116 (8) Nominal flow Cv (I/min) 1.3 (1300) Filtration 40 micron recommended Lubrication With or without lubrication 1) Electrical Characteristics Voltage AC V 110, 0 DC, 4 Duty cycle Continuous duty Electric protection IP65 to DIN 40050 Insulating Material VDE 0580 Connection Plug to DIN 43650 form B 5/-Way Valve 1/4 Interference Sensing Module The interference sensing module was designed to automatically reverse the direction of a pneumatic cylinder, when it detects an obstruction. Loss of back pressure, caused by an obstruction, triggers the built-in pressure switch to shift the valve and retract the cylinder. Applications: Doors Machine Guards Conveyor Transfer Pallet Handling Feed Systems Elevator Systems Variable Height Pick & Place 1) We recommend the use of mineral oil type VG3 to ISO 3448 Version 1/4 Order Number Description Ports Voltage IS050-0133 5/-way IS-module G1/4 vdc IS050-033 5/-way IS-module G1/4vDC IS050-5733 5/-way IS-module G1/4 110vAC IS050-6133 5/-way IS-module G1/0vAC 5 Parker Hannifin Corporation
Characteristics Characteristics to VDI 390 Characteristics Symbol Unit Description Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Base plate Port size G1/4 (base plate) Weight (mass) lbs. (kg) 1.01 (0.46) signal solenoid 1.30 (0.59) double solenoid Ambient ϑ min F ( C) (-10) Note: temperature range ϑ max 0 (+60) When using below freezing point it is necessary to ϑ min F ( C) (-10) consult factory. temperature range ϑ max 0 (+60) Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 9 () range -1 (Version S) p max psi (bar) 174 () Nominal flow 5/-way valve 5/3-way valve Q N Cv (l/min) 1.7 (1680) 1.7 (1680) Actuation Electrical Pilot operated Pilot operated with external pilot air Actuation pressure p at min psi (bar) 9 () range p at max psi (bar) 5 (10) Voltage type AC DC Nominal Voltage Standard version U n V 0 4 Low watt. version U n V 0 4 Further voltages available on request Initial Power Consumption Standard version VA (W) 11 4.8 Low watt. version VA (W) 7.8.7 Continuous Power Consumption Standard version VA (W) 8.5 4.8 Low watt. version VA (W) 4.9.7 Duty cycle ED % Continuous Duty Electrical protection IP65 to DIN 40050 (with plug) Insulating material VDE 0580 Connection Plug to DIN 43650 form B 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way & 5/3-Way Valve, ISO 5599, Size 1 5/-Way Valve 5/3-Way Valve ISO 5599 Size 1 Actuation: Solenoid - Single Solenoid - Double Solenoid - Spring Center Delivery Includes: valve mounting screws gasket solenoid coil(s) Discontinued 6 Parker Hannifin Corporation
Characteristics Characteristics to VDI 390 Characteristics Symbol Unit Description Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Base plate Port size G1/4 (base plate) Weight (mass) lbs. (kg).70 (0.3) Ambient ϑ min F ( C) (-10) Note: temperature range ϑ max 0 (+60) When using below freezing ϑ min F ( C) (-10) point it is necessary to temperature range ϑ max 0 (+60) consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) -13 (-0.9) range p max 174 () Nominal flow 5/-way valve 5/3-way valve Q N Cv (l/min) 1.7 (1680) 1.7 (1680) Actuation Pneumatic Direct Actuation pressure p st min psi (bar) 9 () range p st max psi (bar) 5 (10) 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way & 5/3-Way Valve, ISO 5599, Size 1 5/-Way Valve 5/3-Way Valve ISO 5599 Size 1 Actuation: Air Pilot - Single Air Pilot - Double Air Pilot - Spring Center Delivery Includes: valve mounting screws gasket Discontinued C 7 Parker Hannifin Corporation
Characteristics Characteristics to VDI 390 Characteristics Symbol Unit Description Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Base plate Port size G3/8 (base plate) Weight (mass) lbs. (kg) 1.54 (0.70) single solenoid 1.83 (0.83) double solenoid Ambient ϑ min F ( C) (-10) Note: temperature range ϑ max 0 (+60) When using below freezing point it is necessary to ϑ min F ( C) (-10) consult factory. temperature range ϑ max 0 (+60) Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 9 () range -1 (Version S) p max psi (bar) 174 () Nominal flow 5/-way valve 5/3-way valve Q N Cv (l/min) 4.3 (430) 4.3 (430) Actuation Electrical Pilot operated Pilot operated with external pilot air Actuation pressure p st min bar range p st max bar Voltage type AC DC Nominal Voltage Standard version U n V 0 4 Low watt. version U n V 0 4 Further voltages available on request Initial Power Consumption Standard version VA (W) 11 4.8 Low watt. version VA (W) 7.8.7 Continuous Power Consumption Standard version VA (W) 8.5 4.8 Low watt. version VA (W) 4.9.7 Duty cycle ED % Continuous Duty Electrical protection IP65 to DIN 40050 (with plug) Insulating material VDE 0580 Connection Plug to DIN 43650 form B 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way & 5/3-Way Valve, ISO 5599, Size 5/-Way Valve 5/3-Way Valve ISO 5599 Size Actuation: Solenoid - Single Solenoid - Double Solenoid - Spring Center Delivery Includes: valve mounting screws gasket solenoid coil(s) Discontinued 8 Parker Hannifin Corporation
Characteristics Characteristics to VDI 390 Characteristics Symbol Unit Description Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Base plate Port size G3/8 (base plate) Weight (mass) lbs. (kg) 1.3 (0.56) Ambient ϑ min F ( C) (-10) Note: temperature range ϑ max 0 (+60) When using below freezing ϑ min F ( C) (-10) point it is necessary to temperature range ϑ max 0 (+60) consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) -13 (-0.9) range p max 174 () Nominal flow 5/-way valve 5/3-way valve Q N Cv (l/min) 4.3 (430) 4.3 (430) Actuation Pneumatic Direct Actuation pressure p st min psi (bar) 9 () range p st max psi (bar) 174 () 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way & 5/3-Way Valve, ISO 5599, Size 5/-Way Valve 5/3-Way Valve ISO 5599 Size Actuation: Air Pilot - Single Air Pilot - Double Air Pilot - Spring Center Delivery Includes: valve mounting screws gasket Discontinued 9 Parker Hannifin Corporation
Characteristics Characteristics to VDI 390 Characteristics Symbol Unit Description Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Base plate Port size G1/ (base plate) Weight (mass) lbs. (kg).71 (1.3) single solenoid 3.01 (1.37) double solenoid Ambient ϑ min F ( C) (-10) Note: temperature range ϑ max 0 (+60) When using below freezing point it is necessary to ϑ min F ( C) (-10) consult factory. temperature range ϑ max 0 (+60) Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 9 () range -1 (Version S) p max psi (bar) 174 () Nominal flow 5/-way valve 5/3-way valve Q N Cv (l/min) 6.5 (6540) 6.5 (6540) Actuation Electrical Pilot operated Pilot operated with external pilot air Actuation pressure p st min psi (bar) 9 () range p st max psi (bar) 5 (10) Voltage type AC DC Nominal Voltage Standard version U n V 0 4 Low watt. version U n V 0 4 Further voltages available on request Initial Power Consumption Standard version VA (W) 11 4.8 Low watt. version VA (W) 7.8.7 Continuous Power Consumption Standard version VA (W) 8.5 4.8 Low watt. version VA (W) 4.9.7 Duty cycle ED % Continuous Duty Electrical protection IP65 to DIN 40050 (with plug) Insulating material VDE 0580 Connection Plug to DIN 43650 form B 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way & 5/3-Way Valve, ISO 5599, Size 3 5/-Way Valve 5/3-Way Valve ISO 5599 Size 3 Actuation: Solenoid - Single Solenoid - Double Solenoid - Spring Center Delivery Includes: valve mounting screws gasket solenoid coil(s) Discontinued 68 30 Parker Hannifin Corporation
Characteristics Characteristics to VDI 390 Characteristics Symbol Unit Description Type Ceramic spool valve Mounting On base plate, to ISO 5599 Tube connection Base plate Port size G1/ (base plate) Weight (mass) lbs. (kg).4 (1.1) Ambient ϑ min F ( C) (-10) Note: temperature range ϑ max 0 (+60) When using below freezing ϑ min F ( C) (-10) point it is necessary to temperature range ϑ max 0 (+60) consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) -13 (-0.9) range p max 174 () Nominal flow 5/-way valve 5/3-way valve Q N 1/min 6.5 (6540) 6.5 (6540) Actuation Pneumatic Direct Actuation pressure p st min psi (bar) 9 () range p st max psi (bar) 174 () 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way & 5/3-Way Valve, ISO 5599, Size 3 5/-Way Valve 5/3-Way Valve ISO 5599 Size 3 Actuation: Air Pilot - Single Air Pilot - Double Air Pilot - Spring Center Delivery Includes: valve mounting screws gasket Discontinued 31 Parker Hannifin Corporation
Ordering Information 5/-Way Valves ORDER INSTRUCTIONS: 5/-Way Valves Actuation Symbol Type Number Order Number Size 5/ Single Air Pilot S0561RF-01 PA 891 VDMA 01 Spring Return S0581S-RF-1-.. PA 88-..33 Size 1 pst 4 5 13 4 Spring Return S0561RF-1 PA 869 Size 1 4 Spring Return S0581RF-1-.. PA 875-..33 Size 1 5 13 4 pst 5 13 pst S0561RF- PA 1645 Size S0561RF-3 PA 1646 Size 3 5/ Single Air Pilot S0561R-01 PA 89 VDMA 01 Air Spring Return S0561R-1 PA 870 Size 1 S0561R- PA 1648 Size S0561R-3 PA 1649 Size 3 5/ Double Air Pilot S0561-01 PA 893 VDMA 01 S0561-1 PA 868 Size 1 S0561- PA 164 Size S0561-3 PA 1643 Size 3 5/ Single Solenoid S0581RF-01-.. PA 886-..33 VDMA 01 S0581RF--.. PA 16441-..33 Size S0581RF-3-.. PA 1644-..33 Size 3 5/ Single Solenoid S0581S-RF-01-.. PA 896-..33 VDMA 01 with external pilot air S0581S-RF--.. PA 16456-..33 Size S0581S-RF-3-.. PA 1646-..33 Size 3 5/ Single Solenoid S0581R-01-.. PA 887-..33 VDMA 01 Air Spring Return S0581R-1-.. PA 876-..33 Size 1 S0581R--.. PA 16444-..33 Size Discontinued S0581R-3-.. PA 16445-..33 Size 3 5/ Double Solenoid S0581-01-.. PA 888-..33 VDMA 01 S0581-1-.. PA 874-..33 Size 1 S0581--.. PA 16438-..33 Size S0581-3-.. PA 16439-..33 Size 3 5/ Double Solenoid S0581S-01-.. PA 898-..33 VDMA 01 with external pilot air S0581S-1-.. PA 880-..33 Size 1 S0581S--.. PA 16454-..33 Size S0581S-3-.. PA 16460-..33 Size 3 Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ 3518 01 4 vdc 60 50/60Hz KZ 3519 0 110 50/60Hz 48 vdc KZ 351 57 0 50/60Hz 110 vdc KZ 35 61 Other voltages available. Contact factory. 3 Parker Hannifin Corporation
Ordering Information 5/3-Way Valves ORDER INSTRUCTIONS: 5/3-Way Valves Actuation Symbol Type Number Order Number Size 5/3 Double Air Pilot S0561RFG-01 PA 894 VDMA 01 Closed Center S0561RFG-1 PA 871 Size 1 Dual Center S0561RFB-1 PA 873 Size 1 4 4 4 Closed Center pst pst S0581S-RFG--.. PA 16457-..33 Size pst pst S0561RFG- PA 16431 Size S0561RFG-3 PA 1643 Size 3 S0561RFB- PA 16437 Size Open Center S0561RFE-01 PA 895 VDMA 01 S0561RFE-1 PA 87 Size 1 S0561RFE- PA 16434 Size S0561RFE-3 PA 16435 Size 3 5/3 Double Solenoid S0581RFG-01 PA 889-..33 VDMA 01 Closed Center S0581RFG-1-.. PA 877-..33 Size 1 S0581RFG--.. PA 16447-..33 Size S0581RFG-3-.. PA 16448-..33 Size 3 Dual Center S0581RFB-1-.. PA 879-..33 Size 1 S0581RFB--.. PA 16453-..33 Size Open Center S0581RFE-01 PA 890-..33 VDMA 01 S0581RFE-1-.. PA 878-..33 Size 1 S0581RFE--.. PA 16450-..33 Size S0581RFE-3-.. PA 16451-..33 Size 3 5/3 Double Solenoid S0581S-RFG-01-.. PA 900-..33 VDMA 01 with external air pilot S0581S-RFG-1-.. PA 883-..33 Size 1 Discontinued S0581S-RFG-3-.. PA 16463-..33 Size 3 Dual Center S0581S-RFB-1-.. PA 885-..33 Size 1 S0581S-RFB--.. PA 16459-..33 Size Open Center S0581S-RFE-01-.. PA 899-..33 VDMA 01 pst pst S0581S-RFE-1-.. PA 884-..33 Size 1 S0581S-RFE--.. PA 16458-..33 Size S0581S-RFE-3-.. PA 16464-..33 Size 3 Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ 3518 01 4 vdc 60 50/60Hz KZ 3519 0 110 50/60Hz 48 vdc KZ 351 57 0 50/60Hz 110 vdc KZ 35 61 Other voltages available. Contact factory. 33 Parker Hannifin Corporation
Characteristics Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M5 Tube connection Thread Port size NPT (G) 1/8 Weight (mass) lbs. (kg).616 (0.80) Single solenoid.913 (0.415) Double solenoid Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure Single solenoid range p min psi (bar) 9 () p max 5 (10) Double solenoid p min psi (bar) (1.5) p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Electrical Pilot operated Voltage AC DC Nominal voltage* Standard version U n V 0 4 Initial power consumption Standard version VA (W) 8.5.5 Continuous consumption Standard version VA (W) 6.0.5 Duty cycle ED % Continuous Duty Electrical protection IP65 to DIN 40050 (with plug) Insulating material VDE 0580 Connection Plug to DIN 43650 form B 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way Valve, 1/8 Inch, NAMUR Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 1/8 with NAMUR connection Actuation: Solenoid - Single Solenoid - Double Solenoid Delivery Includes: valve mounting screws coding pin o-rings 34 Parker Hannifin Corporation
Dimensions & Ordering Information 5/-Way Valve, 1/8 Inch, NAMUR Dimensions (mm) ca.08 M5 5, 4 10,5 19,5 4 5 1 8 16 33,5 18 87,5 8 ca.0 5,5 x 3 deep Mounting Dimensions to NAMUR standards 3 4 3 3 G1/8 18 15,5 56 40 15,5 63 Version 1/8 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/ Single Solenoid/Spring Return S9 581RF-1/8-SO PD 343-..33 S9 581RF-1/8U-SO PD 4550-..33 5/ Double Solenoid S9 581-1/8-SO PD 34984-..33 S9 581-1/8U-SO PD 45503-..33 51 3 Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ 3674 01 4 vdc 60 50/60Hz KZ 3673 0 110 50/60Hz 48 vdc KZ 3669 57 0 50/60Hz 110 vdc KZ 367 61 4 50/60Hz -- KZ 3675 51 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. Accessory: Order # NAMURPLATE-1/8 Description Converts the 5/-way valve to a 3/-way valve 35 Parker Hannifin Corporation
Characteristics 5/-Way Valve, 1/4 Inch, NAMUR Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M5 Tube connection Thread Port size NPT (G) 1/4 Weight (mass) lbs. (kg) 1.3 (0.6) Single solenoid 1.54 (0.7) Double solenoid Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Note: When using below freezing point it is necessary to consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure Single solenoid range p min psi (bar) 9 () p max 5 (10) Double solenoid p min psi (bar) (1.5) p max 5 (10) Nominal flow Q N Cv (I/min) 1.3 (1300) Actuation Electrical Pilot operated Voltage AC DC Nominal voltage* Standard version U n V 0 4 Initial power consumption Standard version VA (W) 8.5.5 Continuous consumption Standard version VA (W) 6.0.5 Duty cycle ED % Continuous Duty Electrical protection IP65 to DIN 40050 (with plug) Insulating material VDE 0580 Connection Plug to DIN 43650 form B 5/-Way Valve 1/4 with NAMUR connection Actuation: Solenoid - Single Solenoid - Double Solenoid Delivery Includes: valve mounting screws coding pin o-rings 1) We recommend the use of mineral oil type VG3 to ISO 3448 36 Parker Hannifin Corporation
Dimensions & Ordering Information 5/-Way Valve, 1/4 Inch, NAMUR Dimensions (mm) 3 4 30,5 5,5 x 3 deep 5, 9 3 4 5 1 0,7 3,7 G1/4 106 8 ca.159 19,5 3 ca.31 6 10 41 M5 Mounting Dimensions to NAMUR standards 3 0 15,5 63 5 Version 1/4 Metric Version NPT Version Actuation Symbol Type Number Order Number Type Number Order Number 5/ Single Solenoid/Spring Return S9 581RF-1/4-SO PD 34985-..33 S9 581RF-1/4U-SO PD 45504-..33 5/ Double Solenoid S9 581-1/4-SO PD 34986-..33 S9 581-1/4U-SO PD 45505-..33 51 3 Voltage Range Nominal Secondary Coil Number Order Code vdc -- KZ 3674 01 4 vdc 60 50/60Hz KZ 3673 0 110 50/60Hz 48 vdc KZ 3669 57 0 50/60Hz 110 vdc KZ 367 61 4 50/60Hz -- KZ 3675 51 Other voltages available. Contact factory. Explosion proof coils available. Contact factory. UL/CSA rated coils available. Contact factory. Accessory: Order # NAMURPLATE-1/4 Description Converts the 5/-way valve to a 3/-way valve 37 Parker Hannifin Corporation
Characteristics & Dimensions 5/-Way Valve, 1/8 Inch, Safety Operation Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M5 (M3) Tube connection Thread Port size NPT (G) 1/8 Weight (mass) lbs. (kg).594 (.7) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Note: When using below freezing point it is necessary to consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min).5 (500) Actuation Pneumatic Direct Actuating pressure p st min psi (bar) 9 () range p st max 5 (10) 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way Valve 1/8 for two-hand safety operation Actuation: Pneumatic 1 t The valve switches from outlet 4 to outlet only if both signal inputs are actuated simultaneously or within 0.5 seconds. The valve will not switch again until both signal inputs are stopped. For the safety of operating personnel in manufacturing processes such as pressing, bending, stamping, deburring etc. Not suitable for control systems of eccentric or similar presses. &.1. Dimensions (mm) 45 8,5 18 5 7 18 4 1 7 55,5 18 1 G1/8 18 3 36,7 /1 / 18 G1/8 5 5,5 40 Version 1/8 Metric Version NPT Version Description Type Number Order Number Type Number Order Number Two-hand safety valve S9 563/65RF-1/8-SO PD 37673 S9 563/65RF-1/8U-SO PD 45506 38 Parker Hannifin Corporation
Characteristics & Dimensions 5/-Way Valve, 1/4 Inch, Safety Operation Characteristics to VDI 390 Characteristics Symbol Unit Description Type Spool valve Mounting screws M6 Tube connection Thread Port size NPT (G) 1/4 Weight (mass) lbs. (kg) 1.41 (.64) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Note: When using below freezing point it is necessary to consult factory. Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 1.3 (1300) Actuation Pneumatic Directly Control pressure p st min psi (bar) 44 (3) range p st max 5 (10) 5/-Way Valve 1/4 for two-hand safety operation Actuation: Pneumatic 1 t The valve switches from outlet 4 to outlet only if both signal inputs are actuated simultaneously or within 0.5 seconds. The valve will not switch again until both signal inputs are stopped. For the safety of operating personnel in manufacturing processes such as pressing, bending, stamping, deburring etc. Not suitable for control systems of eccentric or similar presses. &.1. 1) We recommend the use of mineral oil type VG3 to ISO 3448 Dimensions (mm) 6 166 1 67 64,5 76 55 G1/4 5 1 4 G1/8 ø4, ø7,5 87 11 5,5 5 3 4,5 47 36 5.1. 6,5 6 3 5 Version 1/4 Metric Version NPT Version Description Type Number Order Number Type Number Order Number Two-hand safety valve S9 563/65RF-1/4-SO PD 37173 S9 563/65RF-1/4U-SO PD 45507 39 Parker Hannifin Corporation
Characteristics & Dimensions 5/-Way Valve, 1/4 Inch, Pneumatic Oscillating Characteristics to VDI 390 Characteristics Symbol Unit Description System Spool valve Mounting screws M6 (M4) Tube connection Thread Port size NPT (G) 1/4 Weight (mass) lbs. (kg) 1.43 (0.65) Ambient ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) ϑ min F ( C) (-10) temperature range ϑ max 158 (+70) Filtered compressed air Lubrication With or without oil mist lubrication 1) Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 36 (3) range p max 118 (8) Nominal flow Q N Cv (I/min) 1.3 (1300) Actuation Pneumatic Direct Actuating pressure p st min psi (bar) 36 (3) range p st max 118 (8) 1) We recommend the use of mineral oil type VG3 to ISO 3448 Dimensions (mm) Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 1/4 oscillating valve Actuation: Pneumatic & 4 The oscillating valve automatically generates reciprocating movements, for applications such as shaking, feeding, hammering, plunging, scraping, wiping, winding, tensioning, raking, diverting, spraying, cleaning, and dipping. The oscillating valve is supplied with two built-in flow control valves. This makes it easy to adjust the stroke frequency of the actuator. Pneumatic Version: If compressed air is introduced into inlet port 1, the outlet ports 4 and are alternately supplied with air. & 6 3 4 196 111 67 34,5 5 46 5 30 G1/4 5 1 4 ø4, ø7,5 57 11 5,5 5 3 4,5 6,5 6 3 5 Version 1/4 Metric Version NPT Version Description Type Number Order Number Type Number Order Number Oscillating valve S9 568/68-1/4-SO PD 34796 S9 568/68-1/4U-SO PD 45508 40 Parker Hannifin Corporation
Characteristics & Ordering Information Characteristics to VDI 390 Characteristics Unit Description Type Body ported valve Style Spool valve Mounting screws M6 (M4) Tube connection Thread Port size NPT (G) 1/4 Weight (mass) lbs. (kg) 1.70 (.77) Ambient temperature minimum F ( C) (-10) maximum 0 (+60) temperature minimum F ( C) (-10) maximum 158 (+70) Air Nominal pressure psi (bar) 131 (6) Operating pressure minimum psi (bar) 36 (3) maximum 118 (8) Nominal flow Cv (I/min) 1.3 (1300) Filtration 40 micron recommended Lubrication With or without lubrication 1) Electrical Characteristics Voltage AC V 110, 0 DC, 4 Duty cycle Continuous Duty Electric protection IP65 to DIN 40050 Insulating Material VDE 0580 Connection Plug to DIN 43650 form B Actuation Electric (Internal) pilot operated manual override yes 1) We recommend the use of mineral oil type VG3 to ISO 3448 5/-Way Valve, 1/4 Inch, Electric Oscillating 5/-Way Valve 1/4 Oscillating Valve Actuation: Electric Electric Version: Compressed air is introduced into inlet port 1. The outlet ports 4 and are alternately supplied with air, for as long as an electrical signal is present at the solenoid coil. Version 1/4 Order Number Description Ports Voltage PD 47166-0133 5/-way oscillating valve 1/4" NPT vdc PD 47166-033 5/-way oscillating valve 1/4" NPT 4vDC PD 47166-5733 5/-way oscillating valve 1/4" NPT 110vAC 41 Parker Hannifin Corporation
Characteristics 3/-Way Valve, 1/4 Inch, Foot Pedal Characteristics to VDI 390 Characteristics Symbol Unit Description System Poppet valve Mounting After removing the rubber footing 4 screws M8 Tube connection Thread Port size G1/4 Weight (mass) lbs. (kg) 3.08 (1.5) Ambient ϑ min F ( C) (-10) temperature range ϑ max 131 (+55) ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Filtered compressed air Lubrication Oil mist lubrication compatible with Buna N Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 5 (10) Nominal flow Q N Cv (I/min) 1.4 (00) Actuation Manual control Direct Stroke mm Actuating force Fb lbf (N) 6.74 (30) Note: When using below freezing point it is necessary to consult factory. 3/-Way Valve 1/4 Actuation: Foot Pedal - Detent - Spring Return Delivery Includes: valve toe guard 4 Parker Hannifin Corporation
Dimensions & Ordering Information 3/-Way Valve, 1/4 Inch, Foot Pedal Dimensions (mm) 15 15 91 13 * Actuation stroke 133 0 G1/4 S B R A 38 P 0 8 ø8, 3 4 10 165 190 Connection: Version "normally closed": P, B, S Version "normally open": P, A, R * Only for version "both switch positions indexed" - return is only effected after actuating the locking pedal. 31 61 90 115 Mounting instruction: Only use screw connections with max. wrench size across flats of 15. METRIC ONLY Version G1/4 Actuation Return Symbol Type Number Order Number a a B b b F331RF-08NG* KZ 4410 P S Pedal Spring return a a A b b F331RF-08NO* KZ 4411 P R a,b a B b F331-08NG* KZ 4408 Pedal Detent a,b a P S A b F331-08NO* KZ 4409 P R *NG = normally closed, NO = normally open 43 Parker Hannifin Corporation
Characteristics 5/-Way Valve, 1/4 Inch, Foot Pedal Characteristics to VDI 390 Characteristics Symbol Unit Description System Poppet valve Mounting After removing the rubber footing 4 screws M8 Tube connection Thread Port size G1/4 Weight (mass) lbs. (kg) 3.08 (1.5) Ambient ϑ min F ( C) (-10) temperature range ϑ max 131 (+55) ϑ min F ( C) (-10) temperature range ϑ max 0 (+60) Filtered compressed air Lubrication Oil mist lubrication compatible with Buna N Nominal pressure p n psi (bar) 87 (6) Operating pressure p min psi (bar) 0 (0) range p max 10 5 (10) Nominal flow Q N Cv (I/min) 1.4 (00) Actuation Manual control Direct Stroke mm Actuating force Fb lbf (N) 6.74 (30) Note: When using below freezing point it is necessary to consult factory. 5/-Way Valve 1/4 Actuation: Foot Pedal - Detent - Spring Return Delivery Includes: valve toe guard 44 Parker Hannifin Corporation
Dimensions & Ordering Information 5/-Way Valve, 1/4 Inch, Foot Pedal Dimensions (mm) 15 15 91 13 * Actuation stroke 133 0 G1/4 S B R A 38 P 0 8 ø8, 3 4 10 165 190 31 61 90 115 * Only for version "both switch positions indexed" - return is only effected after actuating the locking pedal. Mounting instruction: Only use screw connections with max. wrench size across flats of 15. METRIC ONLY Version G1/4 Actuation Return Symbol Type Number Order Number A B a b Pedal Spring return F531RF-08 KZ 4413 Pedal Detent a,b RPS A B F531-08 KZ 44 RPS 45 Parker Hannifin Corporation
Dimensions & Ordering Information RPS-Supply Manifolds, 1/8 Inch, Metric Dimensions (mm) For dimensions A and B see table 11 49,5 3 3 5 9 65 RPS-Supply Manifolds for directional valves of the S9-1/8 Series 5 5,5 19x0, deep G1/4 Metric Only Body Ported Valves 0,5 43 99 1 3 9,5 B A Drawing shows: RPSL-S9-1/8-3 Dimension Table (mm) Type # # of A B valves RPSL-S9-1/8-74 63 RPSL-S9-1/8-3 3 96 86 RPSL-S9-1/8-4 4 118 109 RPSL-S9-1/8-5 5 0 13 RPSL-S9-1/8-6 6 16 155 RPSL-S9-1/8-7 7 184 178 RPSL-S9-1/8-8 8 06 01 RPSL-S9-1/8-9 9 8 4 RPSL-S9-1/8-10 10 50 47 Order Instructions Material Description RPS-supply mani. Screws O-ring Accessories Material AI, anodized Galvanized steel Oil-resist. rubber Description Order No. Complete cover strip PD 3956 Flow divider PD 4483 Versions: 5/-way valves 5/3-way valves Delivery Includes: RPS-supply manifold mounting screws o-rings Quantity Weight Type # Order # Manifold Screws O-rings (kg) RPSL-S9-1/8- PD 44813-000 1 4 6 0.47 RPSL-S9-1/8-3 PD 44813-0003 1 6 9 0.57 RPSL-S9-1/8-4 PD 44813-0004 1 8 0.67 RPSL-S9-1/8-5 PD 44813-0005 1 10 15 0.77 RPSL-S9-1/8-6 PD 44813-0006 1 18 0.87 RPSL-S9-1/8-7 PD 44813-0007 1 1 0.97 RPSL-S9-1/8-8 PD 44813-0008 1 16 4 1.07 RPSL-S9-1/8-9 PD 44813-0009 1 18 7 1.17 RPSL-S9-1/8-10 PD 44813-0010 1 0 30 1.7 46 Parker Hannifin Corporation
Dimensions & Ordering Information Dimensions (mm) For dimensions A and B see table,5 54,5 33 33 6,5 3x0,5 deep 5 G3/8 RPS-Supply Manifolds, 1/4 Inch, Metric RPS-Supply Manifolds for directional valves of the S9-1/4 Series Metric Only Body Ported Valves 4 31 18,5 83 5 3 1 3 9,5 B A Drawing shows: RPSL-S9-1/4-3 Dimension Table (mm) Type # # of A B valves RPSL-S9-1/4-96 83 RPSL-S9-1/4-3 3 9 116 RPSL-S9-1/4-4 4 16 9 RPSL-S9-1/4-5 5 195 18 RPSL-S9-1/4-6 6 8 15 RPSL-S9-1/4-7 7 61 48 RPSL-S9-1/4-8 8 981 RPSL-S9-1/4-9 9 37 3 RPSL-S9-1/4-10 10 360 347 Material Description Material RPS-supply mani. Anodized alum. Screws Galvanized steel O-ring Oil-resist. rubber Accessories Description Order No. Cover strip kit PD 3957 Flow divider PD 4516 Versions: 5/-way valves 5/3-way valves Delivery Includes: RPS-supply manifold mounting screws o-rings Order Instructions Quantity Weight Type # Order # Manifold Screws O-rings (kg) RPSL-S9-1/4- PD 448-000 1 4 6 0.845 RPSL-S9-1/4-3 PD 448-0003 1 6 9 1.045 RPSL-S9-1/4-4 PD 448-0004 1 8 1.45 RPSL-S9-1/4-5 PD 448-0005 1 10 15 1.445 RPSL-S9-1/4-6 PD 448-0006 1 18 1.645 RPSL-S9-1/4-7 PD 448-0007 1 1 1.845 RPSL-S9-1/4-8 PD 448-0008 1 16.045 RPSL-S9-1/4-9 PD 448-0009 1 18 7.45 RPSL-S9-1/4-10 PD 448-0010 1 0 30.445 47 Parker Hannifin Corporation
Dimensions & Ordering Information Base Plates, ISO 5599 Size 1, & 3 Dimensions (mm) Single Base Plate, Form A A Side Ported Base Plates ISO 5599 Size: 1,, 3 B G Single Base Plates F C D E - To VDMA 4345 Form A Side Ported - To VDMA 4345 Form B Bottom Ported L H J K O C M N P Q Dimension Table (mm) ISO Size A B C D E F G H 1 84 43 1/4 10.5 1.5 10 3 98 95 56 3/8 6 13 40 1 3 119 68 1/ 17 17 18 3 136 ISO Size J K L M N O P Q 1 48 5.5 110 10.5 3.5 4 1/8 58 57 6.6 4 30 30 1/8 74 3 71 6.6 9 17 3 1/8 90 Order Instructions Order Number ISO Size Ports Metric Version NPT Version 1 1/4 KX 9076 600C01 3/8 64K91 3/8 KX 9433 601C01 1/ 643K91 3 1/ KX 9434 60C01 3/4 644K91 48 Parker Hannifin Corporation