Matrix Technical Support Mailer 44 ETERNITY as PRI-VoIP Gateway Dear friend, Let us understand how to configure ETERNITY PE, GE and ME V10R11 and onwards as a PRI-VoIP Gateway. Description: Configuration: Programming Steps: 1. INCOMING TO SYSTEM A 2. INCOMING TO SYSTEM B 3. INCOMING TO SYSTEM C 4. OUTGOING FROM SYSTEM C 5. OUTGOING FROM SYSTEM B 6. OUTGOING FROM SYSTEM A * =In Case of 3rd party PBX tie-up with Matrix only Site A programming is important.
PROGRAMMING TO BE DONE AT SYSTEM A FOR INCOMING: Step1: In the T1E1 port parameters set carrier type as E1 or T1, set signal type as PRI, orientation as Terminal and Treat Incoming call as Trunk. Define IC & OG ref. ID for PRI landing from SP (Service Provider). Step2: In the DDI Routing-Incoming Reference Table define Different DDI routing reference ID for IC ref ID.
Step3: In the DDI Routing- Outgoing Reference ID Table, define different DDI routing reference ID for OG ref ID.
Step4: In the DDI Routing table, define DDI routing reference ID for landing. Table ID 01: Landing in system A [500 549 (50 numbers)] Table ID 02: Landing in system B [550 574 (25 numbers)] Table ID 03: Landing in system C [575 599 (25 numbers)] 05/06/2013 Step5: Enter the credentials like IP address, subnet mask and default gateway in the WAN port settings under VoIP port parameters for Peer to Peer calling.
Step6: In the SIP Trunk Parameters, program peer to peer trunk for calling to system-a Step7: Program peer to peer table for call to be routed from system A to System B & System C
Step8: Station Basic Feature Template (SBFT) is referred for OG call through SIP trunk (P2P Trunk). Assign template number 02 is SBFT. Step9: Select OTBG having SIP trunk as its one of the member for Peer to Peer calling.
Step10: Define SIP trunk as its one of the member to reach to the extensions of system B & C. Step11: Program the ANT table.
PROGRAMMING TO BE DONE AT SYSTEM B FOR INCOMING Step1: Program WAN Port IP details. Enter the IP Details for Peer to Peer calling. Step2: Program peer to peer trunk for SIP calling to system A and System C.
Step3: Program the extensions for DDI number landing (System B). PROGRAMMING TO BE DONE AT SYSTEM C FOR INCOMING: Step1: Program WAN Port IP details; enter the IP details for peer to peer calling.
Step2: Program peer to peer trunk for SIP calling to system A and System C. Step3: Program the extensions for DDI number landing (System C).
PROGRAMMING TO BE DONE AT SYSTEM C FOR OUTGOING: Step1: Allow logical partition: Allow or Restrict Logical Partition from here (Allow it for Gateway Application) Step2: Program Peer to Peer table in the System C.
PROGRAMMING TO BE DONE AT SYSTEM B FOR OUTGOING: Step1: Allow logical partition: Allow or Restrict Logical Partition from here (Allow it for Gateway Application) Step2: Program Peer to Peer table in the System B.
PROGRAMMING TO BE DONE FOR INCOMING TO SYSTEM A: Step1: Allow logical partition: Allow or Restrict Logical Partition from here (Allow it for Gateway Application). Step2: Program CUG table, program required digits for outside calling & define OTBG having T1E1 trunk.
Step3: Program OTBG, select OTBG having T1E1 trunk as its one of the member for outside calling. Step4: Define T1E1 trunk as its one of the member for outgoing call.
That is all to be done for the programing of ETERNITY PE, GE and ME to function as PRI-VoIP Gateway. Technical Training Team training@matrixcomsec.com Disclaimer: The information contained in this e-mail and/or attachment may contain confidential or privileged information. Unauthorized use, disclosure or copying is strictly prohibited and may constitute unlawful act and can possibly attract legal action, civil and/or criminal. The contents of this message need not necessarily reflect or endorse the views of Matrix Comsec Pvt. Ltd on any subject matter. Any action taken or omitted on this message is not entirely at your risk and the originator of this message nor does Matrix Comsec Pvt. Ltd take any responsibility or liability towards the same. If you are not the intended recipient, please notify us immediately and permanently delete the message.