Matrix Technical Support Mailer 27 SIP to SIP & SIP to PSTN calling through SIP Registrar (ITSP)

Transcription

1 Matrix Technical Support Mailer 27 SIP to SIP & SIP to PSTN calling through SIP Registrar (ITSP) 21/06/2011 Dear Friends, This Mailer Provides the Information Related to SIP to SIP Calling Through SIP Registrar (ITSP Internet Telecom Service Provider) & SIP to PSTN Calling Through SIP Registrar & PSTN Switch. It Also Covers the Programming Part of Each Device To Enable This Application. BASIC REQUIREMENT ITSP provides following information to the user, to use ITSP services & get registered into the SIP Registrar or Proxy Server: (1) SIP ID: It can be letters or numbers. Example: or (2) SIP Registrar/Proxy Server Address: It is the Domain-Name/IP in the SIP URL. Example: If SIP address is then proxy01.sipphone.com is the SIP registrar address. (3) Port Address: Example: 5060 (4) Authentication ID: Example: (5) Password: Example: XXXXX (6) Outbound proxy: VoIP service provider can host a SIP outbound proxy server to handle all of the ATA s VoIP traffic. User has to enable this feature if VoIP service provider has a SIP outbound server to handle voice calls. This allows the ATA to work with any type of NAT router and eliminates the need of STUN. (7) Stun server: STUN is used if there is a NAT router between VoIP ATA and SIP Server (from ITSP).

2 SIP CALL TYPES THROUGH SIP REGISTRAR There are 2 kinds of SIP ID call route from SIP registrar of ITSP. (1) SIP ID to PSTN Number (USA, Canada etc) (2) SIP ID to SIP ID SIP to PSTN Call Diagram Figure A shows IP Phone s SIP ID is registered in Registrar/Proxy Server. Figure: A

3 SIP to PSTN call flow Call flow from SIP ID of IP Phone to PSTN Number is shown in the below Figure B. Figure: B

4 SIP To SIP Call Diagram Figure C shows that SIP ID s of all VOIP devices are registered in SIP Proxy/Registrar Server.. Figure: C

5 SIP To SIP Call Flow Call Flow of One SIP ID of IP PHONE to Other SIP ID of Setu ATA2S is shown in above Figure D. Figure: D Note: Kindly refer the Setu VFGX /Setu VFXTH procedure during the Registration of SIP Trunk in ATA Products as well as Setu VP Phones. Because they have same procedure for SIP Trunk registration.

6 Programming Steps for Eternity ME/GE & PE 1. Open the VoIP Port Parameters under VoIP Configuration Link and assign the IP Address, Subnet mask, Gateway & DNS. 2. Open the Status-VoIP Port and check the status of Ethernet Link and Stack State.

7 3. Now Open the SIP Trunk Parameters and Enter the User Credentials [SIP ID, Registrar Server Address, Authentication ID and Authentication Password] which are given by Service Provider in respective filed of Jeeves then submit the page. 4. After that Open the Status SIP trunk and check the SIP Trunk registration status.

8 Programming Steps for Eternity NE 1. Open the Network Parameters under Basic Settings Link and assign the IP Address, Subnet Mask, Gateway and DNS. 2. Now Click on the SIP Trunk and Enter the User Credentials [SIP ID, Registrar Server Address, Authentication ID and Authentication Password] which are given by Service Provider in respective filed of Jeeves then submit the page.

9 3. After that Open the SIP Trunk under Administration Link and check the registration status of SIP Trunk. Programming Steps for Setu VGFX /Setu VFXTH 1. Open the Network under Basic Settings Link and assign the IP Address, Subnet Mask, Gateway and DNS.

10 2. Now Click on the SIP Trunk and Enter the User Credentials [SIP ID, Registrar Server Address, Authentication ID and Authentication Password] which are given by Service Provider in respective filed of Jeeves then submit the page. 3. After that Open the SIP Trunk under Status Link and check the registration status of SIP Trunk.

11 Thanks & Regards Technical Support Team Matrix Telecom, Vadodara, India Disclaimer: The information contained in this and/or attachments to it may contain confidential or privileged information. Unauthorized use, disclosure or copying is strictly prohibited and may constitute unlawful act and can possibly attract legal action, civil and/or criminal. The contents of this message need not necessarily reflect or endorse the views of Matrix Telecom Pvt. Ltd on any subject matter. Any action taken or omitted to be taken based on this message is entirely at your risk. Neither the originator of this message nor Matrix Telecom Pvt. Ltd takes any responsibility or liability towards the same. If you are not the intended recipient, please notify us immediately and permanently delete the message.