Railing Components rass and Fittings, ubing and Extrusions Catalog No. 1102
RIING COMPONENS able of Contents IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 his catalog is part of a series of catalogs describing our full product line. he series consists of the following: Catalog I - Public Guidance Systems Catalog II - ospitality Fixtures Catalog III - Railing Components Featured in this Railing Components catalog, are solid brass and stainless steel components that can be utilized in most railing applications, as well as prefabricated systems that are "ready-to-install". Our large on-hand inventory, knowledgeable sales staff and highly skilled design/manufacturing department, provide you with a quick delivery of products that meet your exact needs. avi Industries was founded in 1979 for the purpose of producing architectural products that meet the highest quality standards for the commercial environment. e recognize the high demand placed on our products, and therefore they are crafted and finished to meet the expectations of the most discriminating client. e invite you to participate in our quest for excellence. he products in this catalog are continuously being developed and improved upon. Specifications, data and dimensions may change without notice. hen these specifications or colors are critical, consult factory for current information. andrails 4-7 Short Rails 8-9 Footrails and rmrails 10-11 Flanges, Finials and 12-13 Mounting Solutions all Fittings 14-15 Flush Fittings 16-17 all Fitting Posts: 18 Factory ssembled Flush Fitting Posts: 19 Factory ssembled Free Standing Rails 20-21 Glass Clips and 22-24 Cap Rails ooth ivider Posts 25-26 Universal and djustable 27 Railing Connectors ubing and Extrusions 28-30 Finishes and Specifications 31 2
East Coast Facilities avi Industries - New York wo Geneva Road rewster, New York 10509 877.213.lavi (213.5284) 845.278.1766 845.278.1765 fax est Coast Facilities avi Industries - California 27810 venue opkins Valencia, California 91355 877.ask.lavi (275.5284) 661.257.7800 661.257.4938 fax 3
RIING COMPONENS andrails Pages 4 thru 7 feature a variety of andrail solutions. he pages are organized for quick reference of all components necessary to complete your project. Our Glass andrail racket 304 in stainless steel, is designed to be mounted through a predrilled hole in the glass panel. (see page 7) 301 Standard andrail racket 606 Scroll Finial Fittings are supplied with self-drilling / self-tapping hardware Notes: ll fittings are supplied with necessary hardware for installation. Mount brackets to stud in wall. Maximum spacing between brackets 4 feet. Consult local codes for rail height and other requirements. 4
andrails RIING COMPONENS 310 Flat andrail racket item# cp d 310 2-1/4" 2-1/ ubing & ends 732 Flush Ell item# tubing w l 732/1-1/2 1-1/ 732/2 2-1/ 2-1/ 311 eluxe Flat andrail racket item# cp d 311 3" 3-1/4" 533 djustable Flange item# tubing h d 533/2 2-15/16" 4" ubing product # diameter thickness mill length 110 1-1/.050 12, 16 ft. 120.050 12, 16 ft. Stainless steel tubing available in 20 ft. lengths only. ends product # diameter thickness angle radius 110/903 1-1/.050 90 bend 3" radius 120/903.050 90 bend 3" radius 110/333 1-1/.050 147 bend 3" radius 120/333.050 147 bend 3" radius ubing splice available. Order part number 830 in 1-1/ or diameter. See Page 28. 301* Standard andrail racket item# tubing cp d 301/1-1/2 1-1/ 2-1/ 2-1/ 301/2 2-1/ 2-1/ *301 available with concealed mount. 606 Scroll Finial item# tubing w h 606/1-1/2 1-1/ 2-3/4" 2-7/8" 606/2 3" 3-1/8" 730* 301 608 533 7" Step eight 11" Step idth *730 is angled at 33 to fit most stairs. 302 eluxe andrail racket item# tubing cp d 302/2 2-3/4" 3-1/8" 304 Glass Mount andrail racket item# tubing cp d 304/1-1/2 1-1/ 2-1/4" 2-1/ 304/2 2-1/ 2-1/ Materials: NE IEM 730 Flush 147 ngle item# tubing w l 730/1-1/2 1-1/ 2-1/4" 3-1/4" 730/2 2-3/4" 3-3/4" 608 all Return item# tubing w h 608/1-1/2 1-1/ 3" 2-3/4" 608/2 3-1/4" 3" Solid rass Solid rass and Finishes: Polished, satin, chrome plated or ido-one powder coating. See page 31 for finishes. avi Industries uses lloy 304 solid stainless steel on all railing components. IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 5
RIING COMPONENS andrails IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 1600S item # a b 1600S 9" 11-1/4" 1600C item # a b 1600C 5-3/4" 5-3/4" 0404 Picket 1600PC* Picket Collar item # a b 1600PC 1-1/ *1600PC is used with picket extrusion 0404. See chart below for dimensions. ypical Rail Installation 1600 Cap Rail 1600E End Finial 1600PC Picket Collar 0202/0404 Picket 1600SR item # a b 1600SR 9" 11-1/4" 1600 item # a b 1600 4-1/ 5-1/4" 310* Flat andrail racket item# cp d 310 2-1/ 2-3/8" *vailable in polished and clear coat finishes. 1600E item # a b 1600E 3-1/ 311* eluxe Flat andrail racket item# cp d 311 3" 3-1/4" *vailable in polished and clear coat finishes. Cap Rail & Extrusions 1600SE item # a b 1600SE 2-1/ 5-1/4" 1600F item # a b 1600F 3-1/4" 3" Materials: Solid rass Finishes: Polished. Cap Rail part # a b mill length 1300 1-5/8" 1-1/16" 16 ft. 1600 1-5/16" 16 ft. 1800 2-1/4" 1-9/16" 16 ft. Extrusions part # a b mill length 0202 1/4" 1/4" 12 ft. 0404 1/ 1/ 12 ft. 6
andrails RIING COMPONENS avi Industries introduces an innovative system for railing support. You can create a variety of handrail and short rail brackets for mounting 1-1/ and rails. he use of these brackets will present a consistent appearance throughout your space. 348 348 Saddle Post ow Saddle Post all Item# ubing Item# ubing 348/1-1/2 1-1/ 4" 3" 348/1-1/2 1-1/ 6" 3" 348/2 4-1/8" 3" 348/2 6-1/8" 3" 308 308GM andrail racket Glass Mounted racket Item# ubing Item# ubing 308/1-1/2 1-1/ 3" 3" 308GM/1-1/2 1-1/ 3" 3" 308/2 3" 3" 308GM/2 3" 3" 300SM 300S 300PS 300P 300GP racket Stem andrail Saddle Post Saddle racket Mounting Glass Mounting Item# eight 300SM 2-1/4" 300SM/ 4-1/4" ardware sold separately Item# 300S/1-1/2 1-1/ 300S/2 ubing ia. ardware sold separately Item# 300PS/1-1/2 1-1/ 300PS/2 ubing ia. ardware sold separately avi Industries uses lloy 304 solid stainless steel on all railing components. Plate Item# iameter 300P 3" 300P/U (Undrilled)3" ardware sold separately Polished / Satin ack Plate Item# iameter 300GP 3" ardware sold separately IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 7
RIING COMPONENS Short Rails he various posts in this system are designed to project a short distance from the mounting surface. ypical applications include: andrails oor Pulls Café Curtain Rods Chair Guard Rails 600 Flush End Cap 341 Saddle Post Fittings are supplied with self-drilling / self-tapping hardware Notes: ll fittings are supplied with necessary hardware for installation. Mount brackets to stud in wall. Maximum spacing between brackets 4 feet. Consult local codes for rail height and other requirements. 8
Short Rails RIING COMPONENS ubing & Oak Full Round 330 all End Post item# tubing cp d 330/1 1" 2-3/4" 2-1/4" 330/1-1/2 1-1/ 2-3/4" 2-15/16" 330/2 3" 3-3/8" 600 Flush End Cap 600/1 1" 1" 1/8" 600/1-1/2 1-1/ 1-1/ 1/8" 600/2 1/8" Finishes: See page 31 for a full list of finishes. 332 all Center Post item# tubing cp d 332/1 1" 2-3/4" 2-1/4" 332/1-1/2 1-1/ 2-3/4" 2-15/16" 332/2 3" 3-3/8" 340 Flush End Post Item# tubing cp d 340/1 1" 2-1/8" 1-3/4" 340/1-1/2 1-1/ 2-7/16"2-5/16" 340/2 3-1/4" 2-1/ 600* Outer End Cap 600/2 2-1/8" 7/8" * Ideal for use with wood rail. Materials: product # diameter thickness mill length 100 1".050 12 ft. 110 1-1/.050 12, 16 ft. 120.050 12, 16 ft. 210 1-1/ solid oak 12 ft. 220 solid oak 12 ft. Stainless steel tubing available in 20 ft. lengths only. 334 all End Post 6" high item# tubing cp d 334/2 5" 3-1/4" 814 Curtain Ring item# tubing a b 814/1 1" 2-1/8" 5/16" 814/1-1/2 1-1/ 2-7/16" 3/8" 814/2 2-7/8" 7/16" ubing splice available. Order part number 830 in 1-1/ or diameter. See Page 28. Solid rass Solid rass and 341* Saddle Post item# tubing cp d 341/1-1/2 1-1/ 2-7/16" 2-5/16" 341/2 3-1/4" 2-1/ * 341 available with concealed mount. 342 Flush Center Post item# tubing cp d 342/1 1" 2-1/8" 1-3/4" 342/1-1/2 1-1/ 2-7/16" 2-5/16" 342/2 3-1/4" 2-1/ 730 Flush 135 ngle item# tubing w l 730/1-1/2 1-1/ 2-3/8" 3" 730/2 2-7/8" 3-3/8" 336 all Center Post 6" high item# tubing cp d 336/2 5" 3-1/4" 732 Flush Ell item# tubing w l 732/1-1/2 1-1/ 732/2 2-1/ 2-1/ avi Industries uses lloy 304 solid stainless steel on all railing components. IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 9
RIING COMPONENS Footrails and rmrails Footrails are traditional where bar-height seating is utilized. hen heavy use is anticipated, steel inserts provide added strength (110S or 120S). 4-foot spacing between brackets is recommended. he ar Mount Footrail bracket (part no. 402) is used when unobstructed clearance is required between floor and rail. 10 604 all Finial 730 Flush 135 ngle 400 Combination racket -00202 ido-ustre Metal Polish Cream should be used to repolish uncoated brass, aluminum and stainless steel. vailable in 6.33 oz. tubes and 16 oz. jars. Materials: Solid rass Solid rass and
Footrails and rmrails RIING COMPONENS 406 Contemporary racket item# tubing cp b 406/2 6-1/16" 2-7/8" 730* Flush 135 ngle item# tubing w l 730/1-1/2 1-1/ 2-15/16" 3" 730/2 2-7/8" 3-3/8" * Use with.050 tubing only, for.065 tubing consult factory. ubing & Steel Inserts ubing product # diameter thickness mill length 110 1-1/.050 12, 16 ft. 111 1-1/.065 16 ft. 120.050 12, 16 ft. 121.065 16 ft. 140 3".050 12 ft. 141 3".065 16 ft. Steel Insert product # diameter thickness mill length 110S 1-1/ - 12 ft. 120S - 12 ft. 400 Combination racket item# tubing cp h 400/1-1/2 1-1/ 6-1/8" 6-1/4" 400/2 6-1/8" 6-1/ 400/2-1/2 2-1/ 6-1/8" 7-1/4" 400/3 3" 9-3/4" 8-3/8" ubing splice available. Order part number 830 in 1-1/, & 3" diameter. See Page 28. 410 Victorian racket item# tubing cp b 410/2 8-1/8" 4-11/16" 731* Flush Radius Ell item# tubing w l 731/1-1/2 1-1/ 2-7/8" 2-7/8" 731/2 3" 3" * Use with.050 tubing only, for.065 tubing consult factory. 402* ar Mount racket* item# tubing cp b 402/1-1/2 1-1/ 6-1/16" 4" 402/2 6-7/8" 4-1/4" * ar Mount racket may be bolted from back side for additional strength. ar op 450 ar rmrail racket item# tubing cp 450/1-1/2 1-1/ 6" 450/2 5-5/8" 450/2-1/2 2-1/ 7" 450/3 3" 7" 732* Flush Ell item# tubing w l 732/1-1/2 1-1/ 732/2 2-1/ 2-1/ 732/3 3" 3-1/ 3-1/ * Use with.050 tubing only, for.065 tubing consult factory. Stainless steel tubing available in 20 ft. lengths only. 404 Floor racket item# tubing cp b 404/1-1/2 1-1/ 5-5/8" 6-11/16" 404/2 6-1/8" 6-11/16" 600* Flush End Cap 600/1-1/2 1-1/ 1-1/ 1/8" 600/2 1/8" 600/2-1/2 2-1/ 2-1/ 3/16" 600/3 3" 3" 3/16" * Use with.050 tubing only, for.065 tubing consult factory. 460 Elephant racket item# tubing cp 460/2-1/2 2-1/ 3-3/8" 604* all Finial 604/1-1/2 1-1/ 2-5/8" 3-1/4" 604/2 3-1/8" 4-1/ 604/3 3" 5" 7" * Use with.050 tubing only, for.065 tubing consult factory. IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 11
RIING COMPONENS Flanges, Finials and Mounting Solutions IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 12 500 all Flange 500/1 1" 7/8" 45 515/535 ngle Flange item# tubing d cp 515/1-1/2 1-1/ 3" 2-1/8" 535/2 4" 2-1/8" 536 Cubical Flange item# tubing w h 536/2 4-1/ 1-5/8" 552/560 Floor Flange 552/2-1/2 2-1/ 7" 1-1/ 560/3 3" 7" 1-1/ Materials: Solid rass Solid rass and Steel 502/510* all Flange 502/1 1" 3" 1-1/ 510/1-1/2 1-1/ 3" 1-1/4" 530*/550 all Flange 530/2 4" 1-1/4" 550/2-1/2 2-1/ 5-1/ 1-1/ 550/3 3" 5-1/ 1-1/ 2 1 2 1 540/541 Steel Flange and Canopy item# tubing d-1 h-1 540/1-1/2 1-1/ 4" 1-1/ 540/2 5" 1-1/ 540/3 3" 7" 1-1/ 540 * 6" 7/8" item# tubing d-2 h-2 541/1-1/2 1-1/ 3-1/ 1 541/2 4-1/ 1 * For use with eltrac Post. 580/581/582/585 Socket Flange 580/1 1" 1-1/8" 3/4" 581/1-1/4 1-1/4" 1-3/8" 1-3/16" 582/1-1/2 1-1/ 1-5/8" 7/8" 585 1-5/16" 1-5/8" 7/8" 511*/531 Cut Flange item# tubing d w 511/1-1/2 1-1/ 3" 531/2 4" 2-1/ 532*/534 Floor Flange 532/2 5" 1-3/8" 534/2 7" 1-1/ 3" 4" 1 542/SE & 543/SE Cubical Flange and Canopy item# tubing R-02-543/SE 1-1/ R-02-542/SE 590 Square Flange item# tubing w h 590/1 1" 3" 1-1/ 590/1-1/2 1-1/ 3-1/ 1-1/ 590/2 4" 1-1/ 512 Floor Flange 512/1-1/2 1-1/ 4" 1-1/4" 533 djustable Flange 533/2 4" 2-9/16" 544/545 Floor Socket w/cap 544/2 2-3/4" 4-1/ 545/2 5" 4-1/ 591 Cut Square Flange item# tubing w l 591/1-1/2 1-1/ 3-1/ 2-1/ 591/2 4" 3-1/4"
Flanges, Finials and Mounting Solutions RIING COMPONENS 600 Flush End Cap 600/1 1" 1" 1/8" 600/1-1/2 1-1/ 1-1/ 1/8" 600/2 1/8" 600/3 3" 3" 3/16" 640* Channel ube End Cap 640/2 1/8" 640/2-1/2 2-1/ 2-1/ 3/16" 640/3 3" 3" 3/16" * For channel tubing see Cap Rail Systems for Glass on page 23. Mounting Solutions ype Surface Mount.050 ubing 512/532 Floor Flange ood Screws (provided) 600 Outer End Cap* 600/2 2-1/8" 7/8" *Ideal for use with wood rail. 606 Scroll Finial item# tubing w h 606/1-1/2 1-1/ 2-3/4" 2-7/8" 606/2 3" 3-1/8" 650 Flat Square End Cap item# tubing w h 650/1 1" 1" 1/8" 650/1-1/2 1-1/ 1-1/ 1/8" 650/2 1/4" ype Surface Mount.050 ubing 540 Flange Canopy hreaded Steel Insert 541 Steel Flange 4 ag olts w/ Floor nchors 602 alf all End Cap 602/1 1" 1" 1/ 602/1-1/2 1-1/ 1-1/ 3/4" 602/2 1" 602/3 3" 3" 7/8" 608 all Return item# tubing w h 608/1-1/2 1-1/ 3" 2-3/4" 608/2 3-1/4" 3" 652 Conical Square End Cap item# tubing w h 652/1-1/2 1-1/ 1-1/ 3/4" 652/2 3/4" hese mounting solutions will solve most common installation problems. See page 12 for a complete line of flanges which can be utilized in these various mounting solutions. ype C Core rilled Steel Insert.050 ubing 540 Flange Canopy 604 all Finial 604/1 1" 1-1/ 604/1 1" 3" 604/1-1/2 1-1/ 2-5/8" 3-1/4" 604/2 3-1/8" 4-1/ 604/3 3" 5" 7" 610 Snap-On End Cap 610/1-1/2 1-1/ 1-1/ 1/3 610/2 1/3 700 all Single Outlet item# tubing d l 700/1-1/2 1-1/ 2-1/ 2-3/4" 700/2 3-1/4" 3-3/8" Materials: Solid rass Solid rass and Finishes: Polished, satin, chrome plated or ido-one powder coating. See page 31 for finishes. avi Industries uses lloy 304 solid stainless steel on all railing components. IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 13
RIING COMPONENS all Fittings Our ball fittings are used when constructing railing in a traditional setting. he vertical posts should be made with a continuous tube (for strength) while the horizontals are cut and fit between posts. 540/541 Steel Flange and Canopy 702 all Ell 703 all Side Outlet Ell -00202 ido-ustre Metal Polish Cream Fittings are supplied with self-drilling / self-tapping hardware 14
all Fittings RIING COMPONENS 700 all Single Outlet item# tubing d l 700/1-1/2 1-1/ 2-1/ 2-3/4" 700/2 3-1/4" 3-3/8" 703 all Side Outlet Ell item# tubing d l 703/1 1" 2-1/ 703/1-1/2 1-1/ 2-1/ 2-3/4" 703/2 3-1/4" 3-3/4" 703/3 3" 5" 5-1/ 706 all Cross item# tubing d l 706/1 1" 3" 706/1-1/2 1-1/ 2-1/ 3" 706/2 3-1/4" 3-1/ 706/3 3" 5" 6" Finishes: See page 31 for a full list of finishes. ubing & Oak Full Round 701 all Parallel Outlet item# tubing d l 701/1-1/2 1-1/ 2-1/ 3" 701/2 3-1/4" 3-1/ 707 Side Outlet Cross item# tubing d l 707/1 1" 2-1/ 707/1-1/2 1-1/ 2-1/ 2-3/4" 707/2 3-1/4" 3-3/4" product # diameter thickness mill length 110 1-1/.050 12, 16 ft. 120.050 12, 16 ft. 140 3".050 12 ft. 210 1-1/ solid oak 12 ft. 220 solid oak 12 ft. ubing splice available. Order part number 830 in 1-1/, & 3" diameter. See Page 28. 701 135 all Ell item# tubing d l 701/1-1/2 1-1/ 2-1/ 3-1/4" 701/2 3-1/4" 5" 704 all ee item# tubing d l 704/1 1" 2-1/ 704/1-1/2 1-1/ 2-1/ 2-3/4" 704/2 3-1/4" 3-3/4" 704/3 3" 5" 5-1/ 708 135 Side Outlet Ell item# tubing d l 708/1-1/2 1-1/ 2-1/ 3-1/4" 708/2 3-1/4" 5" 800 ngle Collar 800/1-1/2 1-1/ 1-3/4" 15/16" 800/2 2-3/16" 1" 800/2 ngle Collar is used to develop the proper angle on a stair railing. 702 all Ell item# tubing d l 702/1 1" 2-1/ 702/1-1/2 1-1/ 2-1/ 2-3/4" 702/2 3-1/4" 3-3/4" 702/3 3" 5" 5-1/ 705 all Side Outlet ee item# tubing d l 705/1 1" 2-1/ 705/1-1/2 1-1/ 2-1/ 2-3/4" 705/2 3-1/4" 3-3/4" 709 135 Side Outlet ee item# tubing d l 709/1-1/2 1-1/ 2-1/ 3-1/4" 709/2 3-1/4" 5" 801 Flush ngle Collar 801/2 7/8" Materials: Solid rass Solid rass and IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 15
RIING COMPONENS Flush Fittings streamlined look is achieved with the use of flush fittings. avi's component options ensure simple assembly and flexibility to accommodate any project. Our line of flush fittings feature a 1 long sleeve (the longest in the industry) for added strength and adhesive coverage. 16 532 Floor Flange 734 Flush ee 818 Coped Perpendicular Collar -00201 ido-eld Metal Contact Cement Our line of flush fittings is designed to work with ido-eld, as they feature a 1" long sleeve for greater adhesive coverage. Fittings are supplied with self-drilling / self-tapping hardware
Flush Fittings RIING COMPONENS 730 Flush 135 ngle item# tubing w l 730/1-1/2 1-1/ 2-15/16" 3" 730/2 2-7/8" 3-3/8" 731 Flush Radius Ell item# tubing w l 731/1 1" 1-7/8" 1-7/8" 731/1-1/2 1-1/ 2-7/8" 2-7/8" 731/2 3" 3" ubing 736 Flush Cross item# tubing w l 736/1-1/2 1-1/ 3" 3" 736/2 3" 3" avi Industries uses lloy 304 solid stainless steel on all railing components. NE IEM 730* Flush 147 ngle item# tubing w l 730/1-1/2 1-1/ 2-1/4" 3-1/4" 730/2 2-3/4" 3-3/4" *See page 5 for usage example illustration. 733 Flush Side Outlet Ell item# tubing w l 733/1-1/2 1-1/ 2-1/4" 733/2 2-1/ 2-1/4" 738 135 Side Outlet Ell item# tubing w cp 738/1-1/2 1-1/ 2-1/4" 1-3/4" 738/2 2-7/8" product # diameter thickness mill length 100 1".050 12 ft. 110 1-1/.050 12, 16 ft. 120.050 12, 16 ft. 140 3".050 12 ft. ubing splice available. Order part number 830 in appropriate diameter. See Page 28. Stainless steel tubing available in 20 ft. lengths only. 734 Flush ee item# tubing w l 734/1-1/2 1-1/ 3" 2-1/4" 734/2 3" 2-1/ 752 Flush all Return item # tubing d cp 752/1-1/2 1-1/ 3" 2-3/4" 752/2 4" 3" 818* Perpendicular Collar 817/1-1/2 1-1/ 1-1/ 818/1-1/2 1-1/ 1-1/ 1-15/16" 818/2 * No installation hardware supplied. 732 Flush Ell item# tubing w l 732/1-1/2 1-1/ 732/2 2-1/ 2-1/ 732/3 3" 3-1/ 3-1/ 735 Flush Outlet ee item# tubing w l 735/1-1/2 1-1/ 3" 2-1/4" 735/2 3" 2-1/ 754 all Mount ee item # tubing d cp 754/1-1/2 1-1/ 3" 2-3/4" 754/2 4" 3" 818* Coped Perpendicular Collar 818 15/16" * No installation hardware supplied. Materials: Solid rass Solid rass and IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 17
RIING COMPONENS all Fitting Posts: Factory ssembled IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 18 Single ine all Posts 36" 4 1-1/ S102/3 S202/3 S202/4 ouble ine all Posts ubing 1-1/ S103/3 S203/3 S203/4 1-1/ S104/3 S204/3 S204/4 1-1/ S105/3 S205/3 S205/4 1-1/ S108/3 S208/3 S208/4 End Post Corner Post Center Post ee Post 135 Corner Post imensions 36" Post: X = 19" 4 Post: X = 2 ow ine all Posts 6" 1 1-1/ 102/5 102/1 202/5 202/1 36" 4 X 1-1/ 102/3 102/4 202/3 202/4 1-1/ 103/3 103/4 203/3 203/4 1-1/ 104/3 104/4 204/3 204/4 1-1/ 105/3 105/4 205/3 205/4 End Post Corner Post Center Post ee Post 1-1/ 103/5 103/1 203/5 203/1 1-1/ 104/5 104/1 204/5 204/1 ow ine Posts are pre-assembled with wall flanges. Narrow (cut) flanges may be substituted on ow ine Posts at no additional charge. 1-1/ 105/5 105/1 205/5 205/1 1-1/ 108/5 208/5 End Post Corner Post Center Post ee Post 135 Corner Post Prefabricated posts are factory welded to provide for easier installation and greater strength. he recommended space between posts is 4 feet. product # diameter thickness mill length 110 1-1/.050 12, 16 ft. 120.050 12, 16 ft. ubing splice available. Order part number 830 in 1-1/ or diameter. See page 28. Stainless steel tubing available in 20 ft. lengths only. egend S = Single ine = ouble ine = ow ine /3 = 36" eight Post /4 = 4 eight Post /5 = 6" eight Post /1 = 1 eight Post example: S102/3 is a single line post, 1-1/ diameter, 36" in height. Materials: Solid brass or solid stainless steel. Finishes: Polished, satin, chrome plated or ido-one powder coating. See page 31 for finishes. avi Industries uses lloy 304 solid stainless steel on all railing components.
Flush Fitting Posts: Factory ssembled RIING COMPONENS Single ine Flush Post 36" 4 1-1/ S132/3 S232/3 S232/4 ouble ine Flush Post 6" 1 1-1/ S133/3 S233/3 S233/4 1-1/ S134/3 S234/3 S234/4 1-1/ S135/3 S235/3 S235/4 1-1/ S138/3 S238/3 S238/4 End Post Corner Post Center Post ee Post 135 Corner Post 1-1/ 132/5 132/1 1-1/ 232/5 232/1 Mounting Solutions ype Surface Mount imensions 36" Post: X = 19" 4 Post: X = 2 ow ine Flush Post.050 ubing 512/532 Floor Flange ood Screws (provided) 36" 4 X 1-1/ 132/3 132/4 232/3 232/4 1-1/ 133/3 133/4 233/3 233/4 1-1/ 134/3 134/4 234/3 S234/4 1-1/ 135/3 135/4 235/3 235/4 End Post Corner Post Center Post ee Post 1-1/ 133/5 133/1 1-1/ 233/5 233/1 1-1/ 134/5 134/1 1-1/ 234/5 S234/1 1-1/ 135/5 135/1 1-1/ 235/5 235/1 1-1/ 138/5 1-1/ 238/5 End Post Corner Post Center Post ee Post 135 Corner Post ype Surface Mount hese mounting solutions will solve most common installation problems. Please specify which mounting is preferred. he examples shown are priced individually and need to be added to Factory ssembled post prices..050 ubing 540 Flange Canopy hreaded Steel Insert 541 Steel Flange 4 ag olts w/ Floor nchors ype C Core rilled ow ine Posts are pre-assembled with wall flanges. Narrow (cut) flanges may be substituted on ow ine Posts at no additional charge. Steel Insert.050 ubing 540 Flange Canopy -00201 ido-eld Metal Contact Cement Our line of flush fittings is designed to work with ido-eld, as they feature a 1" long sleeve for greater adhesive coverage. Use ido-eld to attach horizontal tubing to factory assembled posts. IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 19
RIING COMPONENS Free Standing Rails Free Standing Rails (FSR) are used as dividers in an open space or as a transition handrail between split levels. Standard components may be used or avi Industries can fabricate an FSR to your dimensions. Please see opposing page. his removable horizontal Free Standing Rail provides a separation between the dining and dance areas. Installed with the 545 Floor Socket and Cap (page 12), the rails may be removed when a different room configuration is required. 20 540/541 Steel Flange and Canopy -00202 ido-ustre Metal Polish Cream should be used to repolish uncoated brass, aluminum and stainless steel. vailable in 6.33 oz. tubes and 16 oz. jars. Fittings are supplied with necessary hardware for installation.
Free Standing Rails RIING COMPONENS Materials: Solid rass Solid rass and Sizes: 1-1/ and diameter tubing. Finishes: Polished, satin, chrome plated or ido-one powder coating. See page 31 for finishes. avi Industries uses lloy 304 solid stainless steel on all railing components. djustable saddle (#820) and scroll finial (#606) provide style and safety for multi-level conditions. Carpet bracket (828SE) and spirated tubing (00-60S). Consult factory for specifications. FSR 100 606 Scroll Finial item# tubing w h 606/1-1/2 1-1/ 2-3/4" 2-7/8" 606/2 3" 3-1/8" 606 Scroll Finial S2821/3 Post S2821/3 Post etail 1 821 all djustable Saddle 820 djustable Saddle item# tubing d cp 820/1-1/2 1-1/ 1-1/ 2-7/8" 820/2 3-1/8" 35 822 djustable ee item# tubing d cp 822/2 3" FSR 200 FSR 300 FSR 400 1 1 821 all djustable Saddle item# tubing d cp 821/1-1/2 1-1/ 3-5/8" 821/2 2-7/8" Free Standing Rails: Factory ssembled Notes: ll fittings are supplied with necessary hardware for installation. For mounting solutions see page 13. Consult factory for measurement instruction guide sheets to assist in railing dimensions. IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 21
RIING COMPONENS Glass Clips and Cap Rails IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 Our solid brass glass clips are used to create booth dividers and guard rails and can accommodate 1/4" to 1/ glass. Materials: Solid rass Solid rass and Finishes: Polished brass, chrome plated or ido-one powder coating. See page 31 for finishes. 812 Glass Clip 1/4" Glass item# tubing w h 812/1-1/2 1-1/ 1-1/ 1-1/ 812/2 1-1/ 1-1/ 812/2S (with left glass stop) 812/2SR (with right glass stop) 813 Glass Clip 1/ Glass item# tubing w h 813 13/16" 1-1/ 813/S (with left glass stop) 813/SR (with right glass stop) 812F Glass Clip 1/4" Glass item# w h 812F 3/4" 1-3/4" 813F Glass Clip 1/ Glass item# w h 813F 13/16" 1-3/8" Glass Clip Exploded View 813/2S 813/2SR 812/2 and 813 glass clips are available with both left and right glass stops to provide ease of glass installation. 22
Glass Clips and Cap Rails RIING COMPONENS Cap Rail System for glass components create the look of a floating handrail that easily adapts to both traditional and contemporary architectural environments. Utilizing 1/ thick tempered glass as a structural element, it provides safety and an unobstructed view. C C Channel ubing Solid rass product # a (in.) b (in.) t (in.) lb./ft. mill length 00-121U 2.75.062 2.350 16 ft. 00-131U 2-1/2.75.065 2.750 16 ft. 00-142U 3.75.087 3.650 10 ft. product # a (in.) b (in.) t (in.) lb./ft. mill length 40-121U 2.75.062 1.950 10 ft. 40-132U 2-1/2.75.062 2.300 10, 19 ft. 40-142U 3.75.062 2.650 10 ft. 40-152U 3-1/2.75.062 3.000 10 ft. ubing splice available. Order part number 830 in appropriate diameter. luminum ase product # a (in.) b (in.) c (in.) lb./ft. mill length 50-122 3-1/2 2-1/4.075 7.00 16 ft. Cladding product # a (in.) c (in.) t (in.) mill length 00-SRS420/3 3-1/2.75.050 8 ft. 40-SRS420/3 3-1/2.75.050 8 ft. 308 Glass Mounted racket Item# ubing 308GM/1-1/2 1-1/ 3" 3" 308GM/2 3" 3" 640 Channel ube End Cap 640/2 1/8" 640/2-1/2 2-1/ 2-1/ 3/16" 640/3 3" 3" 3/16" Finishes: Polished, satin, chrome plated or ido-one powder coating. See page 31 for finishes. Products are also available in solid stainless steel. Please consult your Sales Representative for details. 304 Glass Mount andrail racket item# tubing cp d 304/1-1/2 1-1/ 2-1/4" 2-1/ 304/2 2-1/ 2-1/ Materials: Solid rass Solid rass and IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 23
RIING COMPONENS Glass Clips and Cap Rails IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 816/2 GlassGrip item# tubing a b 816/2 2-1/4" 15/16" NE IEM 813R/2 GlassGrip for 1/ glass item# tubing a b 813R/2 2-9/16"1-7/16" 816F GlassGrip Flat item# a b 816F 2-1/4" 15/16" NE IEM 813R/F GlassGrip Flat for 1/ glass item# a b 813R/F 2-5/16"1-7/16" NE IEM 813/2 Glass Clip for 1/ glass item# tubing a b 813/2 2-5/16"1-5/16" Rubber O-Rings Glass Support Pin Install through prefabricated hole in glass (optional) GlassGrip is perfect for all guard rail and booth divider applications. It has a 1/4" to 3/8" adjustable opening. Materials: Solid rass Solid rass and Finishes: Clear coat brass, chrome plated brass and satin / polished stainless steel. NE IEM 813/F Glass Clip Flat for 1/ glass item# a b 813/F 2-3/16"1-5/16" Clip ase 24 Clip op GlassGrip Exploded View
ooth ivider Posts: Factory ssembled RIING COMPONENS Our ivider Posts are designed to hold 1/4" thick panels of glass or other materials. ll posts are furnished with either channel or glass clips for convenient and attractive attachment of panels to posts. Sizes: 1-1/2 and 2 inch diameter tubing. Materials: Solid brass. Finishes: Clear coated polished brass, chrome plated or ido-one powder coating. Options: Posts may be ordered to accommodate 3/8" panels. Please specify. eight of post can be customized to accommodate your panels. Recommended post spacing: 36" to 48". avi Industries also provides glass panels. Please contact the factory for information. PR4 Series: Short Post 1 10" 1-1/ PR41/E 1-1/ PR41/ 1-1/ PR41/C 1-1/ PR41/ PR5 Series: ome Post End Post Corner Post Center Post ee Post 1-1/ PR51/E 1-1/ PR51/ 1-1/ PR51/C 1-1/ PR51/ 16" 14" PR52/E PR52/ PR52/C PR52/ End Post Corner Post Center Post ee Post 25
RIING COMPONENS ooth ivider Posts: Factory ssembled IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 PR6 Series: all Post 16" 16" 14" PR7 Series: Square Post 16" 14" 14" 1-1/ PR61/E PR62/E 1-1/ PR61/ PR62/ 1-1/ PR61/C PR62/C 1-1/ PR61/ PR62/ End Post Corner Post Center Post ee Post 1-1/ PR71/E PR72/E PR8 Series: 14" Glass Grip Post 18" 16" 1-1/ PR71/ PR72/ PR71/C PR72/C End Post Corner Post Center Post ee Post PR82/E PR9 Series: 18" Glass Grip Post Mounting Solutions PR82/ PR82/C 1-1/ PR71/ PR72/ PR82/ End Post Corner Post Center Post ee Post NE IEM PR92/E PR92/ PR92/C PR92/ End Post Corner Post Center Post ee Post 1-1/ Mounting Flanges 2-1/ Mounting Flanges 510 3" 3-1/ Sq. 3" 3-1/ NE IEM 590 511 591 530 590 531 591 Standard Optional Standard Optional 4" ooth dividers are pre-assembled with standard wall flanges. Narrow (cut) flanges may be substituted at no additional charge. 4" Sq. 2-1/ 4" 3-1/4" 4" 26
Universal and djustable Railing Connectors RIING COMPONENS 805 dapter to 1" item# d h 805/1 1-15/16" 1-7/8" 818* Perpendicular Collar 817/1-1/2 1-1/ 1-1/ 818/1-1/2 1-1/ 1-1/ 1-15/16" 818/2 * No installation hardware supplied. Mounting hole has clearance for 1/4" fastener. 820 djustable Saddle item# tubing d cp 820/1-1/2 1-1/ 1-1/ 2-7/8" 820/2 3-1/8" ypical Rail Installation 819 Outer Perpendicular Collar 540/541 Steel Flange and Canopy 806 Picket Connector 805 dapter Mounting Screw (not included) 1" iameter ubing 821 all djustable Saddle item# tubing d cp 821/1-1/2 1-1/ 3-5/8" 821/2 2-7/8" 818 Perpendicular Collar 600 Flush End Cap 35 822 djustable ee item# tubing d cp 822/2 3" 730 Flush 147 ngle 822 djustable ee 11" Step idth 1 732 Flush Ell 730 Flush 147 ngle 7" Step eight 2 806* Picket Connector item# d1 d2 h 806/1 1" 1-3/4" *806 Picket Connector is used similarly to 805 dapter. 818* 819* Coped Perpendicular Collar Outer Perpendicular Collar 818 15/16" * No installation hardware supplied. 819/2 2-13/16" 1-3/4" Mounting hole has clearance for * No installation hardware supplied. 1/4" fastener. Mounting hole has clearance for 1/4" fastener. avi Industries offers universal connectors either factory assembled into posts, or as individual components to accommodate any rail configuration. 2 1 2 1 540/541 Steel Flange and Canopy item# tubing d-1 h-1 540/1-1/2 1-1/ 4" 1-1/ 540/2 5" 1-1/ 540/3 3" 7" 1-1/ item# tubing d-2 h-2 541/1-1/2 1-1/ 3-1/ 1 541/2 4-1/ 1 3" 4" Finishes: Polished, satin, chrome plated or ido-one powder coating. See page 31 for finishes. 1 542/SE & 543/SE Cubical Flange and Canopy item# tubing R-02-543/SE 1-1/ R-02-542/SE Materials: Solid rass Solid rass and Steel IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 27
RIING COMPONENS ubing and Extrusions IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 Please use one of the following prefixes for finish designation: 00 rass, Polished 01 rass, Mill 02 rass, Clear Coat 04 rass, Satin Clear Coat 10 Chrome, Over Steel 12 Chrome, Over rass 26 ido-one,over Steel 06 ido-one,over rass 30 Solid Oak 40, Polished 41, Mill 44, Satin 50 luminum Example: 00-120 = 2 inch, polished brass,.050 round tubing. Note: Items highlighted are commonly used with our Fittings and Components. Solid rass Round ubing product # a(in.) t(in.) lb./ft. mill ft. 00-20 1/4.032.081 12 00-30 3/8.050.190 12 00-49 1/2.032.174 12 00-50 1/2.050.257 12 00-51 1/2.065.328 12 00-60 5/8.040.328 12 00-70 3/4.050.398 12 00-100 1.050.541 12 00-101 1.065.706 12,16 00-103 1.125 1.270 12 00-105 1-1/4.050.694 12 00-108 1-1/2.032.550 12 00-110 1-1/2.050.830 12,16 00-110I 1-1/2 I 16 00-111 1-1/2.065 1.080 16 00-115 1-3/4.050.960 12 00-118 2.040.907 12 00-120 2.050 1.080 12,16 00-120I 2 I 16 00-121 2.065 1.460 16 00-123 2.125 2.710 12 00-130 2-1/2.050 1.410 12 00-131 2-1/2.065 1.830 16 00-140 3.050 1.710 12 00-141 3.065 2.210 16 00-161 4.065 2.960 12 00-163 4.125 5.600 12 ubing Splice Round ubing product # a(in.) t(in.) length 01-830/1 1.050 6" 01-830/1-1/2 1-1/2.050 6" 01-830/2 2.050 6" 01-830/2-1/2 2-1/2.050 6" 01-830/3 3.050 6" Polished Chrome Round ubing product # a(in.) t(in.) lb./ft. mill ft. 12-50 1/2.050.240 12 10-100 1.050.500 12 12-105 1-1/4.050.630 12 10-106 1-5/16.080 1.02 12 10-110 1-1/2.050.760 12 12-115 1-3/4.050.890 12 10-120 2.050 1.030 12 10-130 2-1/2.050 1.300 12 10-140 3.050 1.570 12 ido-one Round ubing product # a(in.) t(in.) lb./ft. mill ft. 26-100 1.050.500 12 26-110 1-1/2.050.760 12 26-120 2.050 1.030 12 26-140 3.050 1.570 12 Steel Sleeve for Round ubing product # use with tubing lb./ft. mill ft. 20-100S 100.563 20 20-110S 110 1.328 12 20-120S 120 1.922 12 Round ubing product # a(in.) t(in.) lb./ft. mill ft. 40-60 5/8.040.328 12 40-100 1.050.510 20 40-110 1-1/2.050.770 20 40-111 1-1/2.065.990 20 40-120 2.050 1.020 20 40-121 2.065 1.300 20 40-130 2-1/2.050 1.280 20 40-131 2-1/2.065 1.690 20 40-140 3.050 1.540 20 40-141 3.065 2.040 20 Reeded Solid rass Round ubing product # diameter lb./ft. mill ft. 00-100R 1.270 12 00-110R 1-1/2.448 12 00-120R 2.599 12 00-121R 2.952 12 Spirated Solid rass Round ubing product # diameter lb./ft. mill ft. 00-60S 5/8.231 12 00-100S 1.246 12 00-110S 1-1/2.571 12 00-120S 2.765 12 Solid rass Square ubing product # a(in.) t(in.) lb./ft. mill ft. 00-C06061 3/4.050.520 12 00-C06062 3/4.065.660 12 00-C08081 1.050.710 12 00-C08082 1.065.920 12 00-C12121 1-1/2.050 1.070 12 00-C12122 1-1/2.065 1.380 12 00-C16161 2.050 1.440 12 00-C16162 2.065 1.860 12 Solid rass Rod product # a(in.) lb./ft. mill ft. 00-R02 1/4.180 12 00-R03 3/8.407 12 00-R04 1/2.723 12 00-R06 3/4 1.630 12 00-R08 1 2.900 12 Solid Oak Full Round product # a(in.) mill ft. 30-200 1 4, 12 30-210 1-1/2 12 30-220 2 8, 12 28
ubing and Extrusions RIING COMPONENS 1/ Solid rass ar product # a(in.) b(in.) lb./ft. mill ft. 00-044 1/8 1/2.230 12 00-054 1/8 5/8.288 12 00-064 1/8 3/4.346 12 00-084 1/8 1.461 12 00-124 1/8 1-1/2.691 12 00-164 1/8 2.920 12 00-0202 1/4 1/4.230 12 00-048 1/4 1/2.461 12 00-068 1/4 3/4.691 12 00-088 1/4 1.920 12 00-128 1/4 1-1/2 1.380 12 00-168 1/4 2 1.840 12 00-0812 3/8 1 1.380 12 00-1612 3/8 2 2.760 12 00-0404 1/2 1/2.920 12 00-0616 1/2 3/4 1.380 12 00-0816 1/2 1 1.840 12 00-1216 1/2 1-1/2 2.760 12 00-1616 1/2 2 3.680 12 Solid rass andrail Cap Extrusion product # a(in.) b(in.) lb./ft. mill ft. 00-1300 1-5/8 1-1/16 1.820 16 00-1600 2 1-5/16 2.280 16 00-1800 2-1/4 1-9/16 2.910 16 For a full line of fittings for the 1600 see page 6. Recessed Solid rass ubing product # a(in.) b(in.) lb./ft. mill ft. 00-120U1 2.31 1.26 12 00-120U2 2.31 1.50 12 00-120U3 2.31 1.50 12 00-120U4 2.31 1.69 12 ll recessed channel tubing is.050 thick wall. 00-120U1 00-120U2 00-120U3 00-120U4 Cap Rail System For Glass Cap Rail components create the look of a floating handrail that easily adapts to both traditional and contemporary architectural environments. Utilizing 1/ thick tempered glass as a structural element, it provides safety and an unobstructed view. (see page 23) C C Solid rass Channel ubing product # a(in.) b(in.) t(in.) lb./ft. mill ft. 00-121U 2.75.062 1.710 16 00-131U 2-1/2.75.065 2.260 16 00-142U 3.75.087 3.650 10 Channel ubing product # a(in.) b(in.) t(in.) lb./ft. mill ft. 40-121U 2.75.062 1.950 10 40-132U 2-1/2.75.062 2.300 10, 19 40-142U 3.75.062 2.650 10 40-152U 3-1/2.75.062 3.000 10 luminum ase product # a(in.) b(in.) c(in.) lb./ft. mill ft. 50-122 3-1/2 2-1/4.75 7.00 16 Solid rass / Cladding product # a(in.) c(in.) t(in.) mill ft. 00-SRS420/3 3-1/2.75.050 8 40-SRS420/3 3-1/2.75.050 8 IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 29
RIING COMPONENS ubing and Extrusions IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 30 00-064 Solid rass ar (order separately) Please use one of the following prefixes for finish designation: Solid rass Channel product # a(in.) b(in.) t(in.) lb./ft. mill ft. U03032 3/8 3/8.062.190 12 U04032 1/2 3/8.062.224 12 U04043 1/2 1/2.094.440 12 U04083 3/4 1/2.094.600 12 U05053 5/8 5/8.094.570 12 U06063 3/4 3/4.094.690 12 U08083 1 1.110 1.200 12 U04085 1/2 1.125.850 12 Solid rass ngle product # a(in.) b(in.) t(in.) lb./ft. mill ft. 00-04042 1/2 1/2.065.220 12 00-04043 1/2 1/2.090.312 12 00-04044 1/2 1/2.125.420 12 00-05052 5/8 5/8.065.280 12 00-06062 3/4 3/4.065.320 12 00-06064 3/4 3/4.125.630 12 00-08082 1 1.065.460 12 00-08084 1 1.125.890 12 00-12124 1-1/2 1-1/2.125 1.220 12 Solid rass Radius ack Channel product # a(in.) b(in.) t(in.) lb./ft. mill ft. U04043C 1/2 1/2.094.464 12 U05053C 5/8 5/8.094.700 12 Radius ack Channel product # a(in.) b(in.) t(in.) lb./ft. mill ft. UO4052C 5/8 1/2.065.350 12 UO3052C 5/8 3/8.065.320 12 Solid rass Radius ngle product # a(in.) b(in.) t(in.) lb./ft. mill ft. 08043C 3/4 1/2.090.510 12 00 rass, Polished 01 rass, Mill 02 rass, Clear Coat 04 rass, Satin Clear Coat 10 Chrome, Over Steel 12 Chrome, Over rass 26 ido-one,over Steel 06 ido-one,over rass 30 Solid Oak 40, Polished 41, Mill 44, Satin 50 luminum Example: 00-120 = 2 inch, polished brass,.050 round tubing. 45 Miter Radius Radius bends are formed from.050 tubing. Radius Radius bends are formed from.050 tubing. Solid rass Framing Channel product # a(in.) b(in.) t(in.) lb./ft. mill ft. U04063S 3/4 1/2.062.854 12 1/4" Panel 10-24 x 1-1/4 Flat ead Machine Screw 5/16" luminum Framing Channel product # a(in.) b(in.) t(in.) lb./ft. mill ft. U04063S 3/4 1/2.062.270 12 Solid rass Radius end product # dia. a(in.) radius(in.) angle 110/903 1-1/2 12 3 90 110/453 1-1/2 12 3 135 110/333 1-1/2 12 3 147 110/906 1-1/2 12 6 90 110/912 1-1/2 18 12 90 120/903 2 12 3 90 120/453 2 12 3 135 120/333 2 12 3 147 120/906 2 12 6 90 120/912 2 18 12 90 Radius end product # dia. a(in.) radius(in.) angle 110/903 1-1/2 12 3 90 110/453 1-1/2 12 3 135 110/333 1-1/2 12 3 147 110/906 1-1/2 12 6 90 110/912 1-1/2 18 12 90 120/903 2 12 3 90 120/453 2 12 3 135 120/333 2 12 3 147 120/906 2 12 6 90 120/912 2 18 12 90 Notes and General Information: ll solid brass flat bars, angles, rods, and channels are stocked in mill finish. Polished or chrome finishes are available. Please specify which surfaces are to be polished. ll tubing and extrusions are sold in mill lengths. Cutting service is available, consult factory. Cut-offs will be shipped upon request.
Finishes and Specifications RIING COMPONENS Materials: avi Industries is a manufacturer of premium materials for architectural interiors. Our products are designed to meet most building codes. Solid brass and stainless steel are our choice materials for quality and durability. e finish these metals in-house, to maintain rigid quality control. arranty Our products carry a limited warranty against defects and failure. Please refer to our current Price ist for warranty details. Ordering Information 1. ubing and Extrusions Standard full lengths of tubing and extrusions are 12' and 16'. t no extra charge, up to three cuts per full length may be ordered. For orders less than a full length, the uyer will be charged for the nearest standard full length (10' will be charged for 12'). Cut-offs will be shipped upon request. 2. Part Numbers and Finish esignation hen ordering, please use finish prefix as specified in the Materials and Finishes chart below. Example: 10-301/2 = Polished Chrome andrail racket, for ubing. 3. rawings Our engineering department will be happy to assist you with your specification requirements. rawings of our products are available as needed. e can generate C drawings for your specific job, please consult us for details. Materials and Finishes finish material prefix Mill rass 01 Polished rass 00 Solid rass Polished rass, Clear Coat 02 Satin rass, Clear Coat 04 Mill 41 Polished #7, lloy 304 40 Satin #4 44 Solid rass (Fittings) 10 Polished Chrome Solid rass (ubing) 12 Carbon Steel (ubing) 10 Solid rass 06 ido-one Carbon Steel 26 luminum, lloy 6061 56 right nodized luminum, lloy 6063 50 ido-one ido-one powder coating is highly durable, as well as decorative. his two coat finish combines the outstanding chemical and mechanical properties of epoxies with a wide variety of colors and surface textures. hen an exterior application is specified, a polyester-based coating will be utilized. See ido-one standard color chart below. Custom colors and finishes are available. Please consult with your Sales Executive. ido-one extured Finishes ido-one et-ook Finishes Metal Finishes maintenance Not pplicable. ido-ustre,or other brass polish. rinkle lack orch Red lue Polished rass amp rag, avoid ammonia base cleaners. Not pplicable. Maintenance free or ido-ustre. Maintenance free. amp rag, avoid ammonia base cleaners. rinkle Charcoal et lack unter Green Satin Stainless Steel Verdi Gris Statuary ronze Sandstone Polished Chrome Pacific Sand Utility Gray Silver Matte Satin rass heel hite Sea Green Polished Stainless Steel -00202 ido-ustre Metal Polish Cream should be used to repolish uncoated brass, aluminum and stainless steel. vailable in 6.33 oz. tubes and 16 oz. jars. IF YOU VE QUESIONS OR O PCE N ORER C US 877-SK-VI OR 661-257-7800 FX 661-257-4938 31
avi Industries Corporate eadquarters 27810 VENUE OPKINS VENCI, C 91355 800.624.6225 661.257.7800 661.257.4938 FX.VI.COM SES@VI.COM EMI avi Industries - New York 2 GENEV RO RESER, NY 10509 877.213.VI (877.213.5284) 845.278.1766 845.278.1765 FX SES N CUSOMER SERVICE, US : (877) 275-5284 INERNION SES : 001-661-257-7800 www.lavi.com SES@VI.COM EMI 2002 avi Industries. Products for the People and the Places hey Go, ido-one, ido-ustre and GlassGrip are registered trademarks of avi Industries. ll other trademarks and trade names are the property of their respective owners. ll product designs avi Industries. No part of this brochure may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system, without written permission from avi Industries. Note: avi Industries has a policy of continuous development and improvement to our product line. Specifications, data and dimensions may change without notice. hen these specifications or colors are critical, consult factory for current information. 11-02-15000