Andersen Clad Inswing Entry Doors (2001 to Present)
|
|
|
- Jessie Gallagher
- 9 years ago
- Views:
Transcription
1 Andersen Clad Inswing Entry Doors (2001 to Present) What s in This Section Clad Inswing Entry Doors Page 3 Part Illustrations 3 Parts Illustration - Single Door 3 Parts Illustration - Double Door 4 Parts Illustration - Active Door 5 Parts Illustration - Passive Door 6 Parts Illustration - Stationary Door 7 Unit Sizes 8 Product Label 8 Standard Sizes 9 Panels 11 Panels - Shapes and Sizes 11 Panel Assembly - Active 12 Panel Assembly - Passive 13 Panel Assembly - Stationary 14 Panel Options 15 Replacement Door Panels 16 Reglazing Kits 16 Replacement Raised & Flat Panels 17 Interior Glazing Stops 18 Astragals 19 Decorative Raised Mouldings 23 Door Panel Parts 24 Grilles 26 Interior and Exterior Grilles 26 Grille Profiles - Wood 27 Grille Profiles - Aluminum 28 Grille Profiles - Fibrex 28 Standard Grille Patterns 29 Grille Parts 30 Hardware 31 Trim Set Illustration - GU / Active 31 Trim Set Illustration - GU / Semi Active 32 Trim Set Illustration - GU / Dummy 33 Trim Set 34 May Andersen Clad Inswing Entry Doors (2001 to Present) - 1
2 E N T R Y D O O R S Trim Set Illustrations - European / Active 35 Trim Set Illustration - European / Semi Active 36 Trim Set Illustration - European / Dummy 37 Trim Sets- European 38 Shared Trim Set Parts 39 Trim Set Parts - AW / 2 ¼" Door Panel 41 Lock Assembly - AW 42 Lock Parts - AW 44 Lock Assembly - GU 45 Lock Parts - GU 47 Lock Assembly - Old GU 48 Lock Parts - Old GU 50 Flush Bolts 51 Hinges 53 Screws - Hinge 56 Frames 57 Frame Assembly - Active & Passive / 4 9 / 16 " Wall 57 Frame Assembly - Active & Passive / 6 9 /16" Wall 58 Frame Assembly - Stationary 59 Sill 60 Sill Parts 62 Extension Jambs 64 Frame Parts 66 Joining Components 68 Mullion Covers - Interior 68 Mullion Covers - Exterior 69 Interior Casing 70 Casing Profiles 70 Casing Parts 72 Installation Components 74 Installation Components 74 Service Replacement Page 77 Service Replacement Parts 77 Service Parts Andersen Clad Inswing Entry Doors (2001 to Present) May
3 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Parts Illustration Parts Illustration - Single Door Single doors can be active or stationary. Head Jamb Top Rail Installation Flange Side Stile Side Jamb Trim Set Hardware Door Panel Bottom Rail Sill Clad Inswing Entry Doors Unit Parts - Single Door Unit viewed from exterior 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 3
4 E N T R Y D O O R S Parts Illustration Parts Illustration - Double Door Double doors can be active/passive, passive/active, active/stationary, stationary/active, or stationary/stationary. Head Jamb Top Rail Astragal Installation Flange Side Jamb Side Stile Trim Set Hardware Door Panel Bottom Rail Sill Clad Inswing Entry Doors Unit Parts - Double Doors Unit viewed from exterior 4 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
5 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Parts Illustration Parts Illustration - Active Door Door Panel Side Jamb Weatherseal Installation Flange Interior Glazing Stop Watershed Door Sweep Sill End Cap Interior Trim Cover Weep Hole Cover Sill Insert Sill (Contain and Drain) Clad Inswing Entry Doors - Active Door 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 5
6 E N T R Y D O O R S Parts Illustration Parts Illustration - Passive Door Interior Glazing Stop Door Panel Side Jamb Weatherseal Installation Flange Astragal Weatherseal Door Sweep Sill End Cap Interior Trim Cover Weep Hole Cover Watershed Sill Insert Sill (Contain and Drain) Clad Inswing Doors - Passive Door 6 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
7 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Parts Illustration Parts Illustration - Stationary Door Interior Panel Stop Sealant Side Jamb Interior Glazing Stop Installation Flange Door Panel Watershed Trim Stop Interior Trim Cover Sill End Cap Panel Support Block Weep Hole Cover Sill Insert Sealant Sill (Contain and Drain) Clad Inswing Entry Doors - Stationary Door 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 7
8 E N T R Y D O O R S Unit Sizes Product Label Clad inswing entry doors have an identification logo etched on the bottom right corner of the glass as viewed from the interior. If there is no glass the identification logo may be behind the hinge leaf of the top hinge on a single door or top right hinge of a double door or on the outside of the bottom hinge. This identification logo contains a P Number. The P Number is located directly below the Andersen or KML by Andersen logo. P Numbers include both the Production Number and Line Item Number separated by an exclamation mark. When ordering replacement parts, please provide the P Number and a brief description of the product and part required to ensure the replacement part(s) match the specifications of the original product. If unable to locate the P Number contact the appropriate Andersen distributor. IDENTIFICATION LOGO Quarter & Year of Manufacture Date of Manufacture P123456!12 P NUMBER Production Number Line Item 8 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
9 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Unit Sizes Standard Sizes Standard sizes similar to Andersen 400 and/or 200 Series product. Custom sizes and shapes available. Rectangle Doors Double Rectangle Doors Arch Top Doors Unit No. Dimensions (w h) 24S / 16 " 82" 30S / 16 " 82" 32S / 16 " 82" 36S / 16 " 82" 42S / 16 " 82" 24E / 16 " 95" 30E / 16 " 95" 32E / 16 " 95" 36E / 16 " 95" 42E / 16 " 95" Unit No. Dimensions (w h) 24S102DBL 50 ¾" 82" 30S102DBL 62 ¾" 82" 32S102DBL 66 ¾" 82" 36S102DBL 74 ¾" 82" 42S102DBL 86 ¾" 82" 24E102DBL 50 ¾" 95" 30E102DBL 62 ¾" 95" 32E102DBL 66 ¾" 95" 36E102DBL 74 ¾" 95" 42E102DBL 86 ¾" 95" Unit No. Dimensions (w x h) 24S / 16 " 82" 30S / 16 " 82" 32S / 16 " 82" 36S / 16 " 82" 42S / 16 " 82" 24E / 16 " 95" 30E / 16 " 95" 32E / 16 " 95" 36E / 16 " 95" 42E / 16 " 95" 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 9
10 E N T R Y D O O R S Unit Sizes Double Arch Doors Springline Doors Unit No. Dimensions (w h) 24S ¾" 82" 30S ¾" 82" 32S ¾" 82" 36S ¾" 82" 42S ¾" 82" 24E ¾" 95" 30E ¾" 95" 32E ¾" 95" 36E ¾" 95" 42E ¾" 95" Unit No. Dimensions (w h) 36S / 16 " 82" 42S / 16 " 82" 36E / 16 " 95" 42E / 16 " 95" Double Springline Doors Unit No. Dimensions (w h) 36E ¾" 95" 10 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
11 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Panels Panels - Shapes and Sizes These doors represent only a few of the many styles available Clad Inswing Entry Doors - Shapes and Styles 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 11
12 E N T R Y D O O R S Panels Panel Assembly - Active 6 6 Straight Top Rail Curved Top Rail Side Stile Side Stile Interior Glazing Stop 2. Curved Interior Glazing Stop 3. Sealant Glazing Compound 4. Watershed 5. Door Sweep 6. Panel Cap 4 Bottom Rail 5 Clad Inswing Entry Doors - Active Panels 12 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
13 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Panels Panel Assembly - Passive 6 6 Straight Top Rail Curved Top Rail Side Stile Side Stile Interior Glazing Stop 2. Curved Interior Glazing Stop 3. Sealant Glazing Compound 4. Watershed 5. Door Sweep 6. Panel Cap 7. Weatherseal 8. Astragal 4 Bottom Rail 5 Clad Inswing Entry Doors - Passive Panels 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 13
14 E N T R Y D O O R S Panels Panel Assembly - Stationary Straight Top Rail Curved Top Rail 1 2 Side Stile Side Stile Interior Glazing Stop 2. Curved Interior Glazing Stop 3. Sealant Glazing Compound 4. Watershed 5. Modified Astragal 6. Panel Support Block 4 Bottom Rail 6 Clad Inswing Entry Doors - Stationary Panels 14 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
15 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Panels Panel Options Panel Thicknesses 1 ¾" Thick Door Panel 2 ¼" Thick Door Panel Glass / Flat Panels / Raised Panels Glass Flat Panel Raised Panel 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 15
16 E N T R Y D O O R S Panels Replacement Door Panels Replacement door panels are made to order. To order, complete the Hinge Location Form and state: 1. Description of Part (replacement door panel) 2. Quantity 3. P number (from product label, see page 8) Reglazing Kits Kit Includes: Glass unit. Interior glazing stops and permanent grilles are optional and must be ordered separately. Glazing stops and grilles have tape applied. Reglazing kits are made to order. To order, state: 1. Description of Part (reglazing kit) 2. Quantity 3. P number (from product label, see page 8) 16 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
17 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Panels Replacement Raised & Flat Panels Replacement Raised Panels Core Interior Panel Exterior Panel Raised panels are made up of 3 parts; exterior panel, interior panel & core. Raised panels can be ordered as separate pieces or as a set. Interior raised panels are available in pine, oak, mahogany, maple, cherry, Douglas fir, alder and prefinished white. Exterior raised panels are available in 21 standard and any custom color. To order, state: 1. Description of Part (raised panel) 2. Quantity 3. P number (from product label, see page 8) Replacement Flat Panels Exterior Side Interior Side Flat panels are 1 piece. Interior of flat panels are available in pine, oak, mahogany, maple, cherry, Douglas fir, alder and prefinished white. Exterior of flat panels are available in 21 standard and any custom color. To order, state: 1. Description of Part (flat panel) 2. Quantity 3. P number (from product label, see page 8) 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 17
18 E N T R Y D O O R S Panels Interior Glazing Stops Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. Interior Glazing Stop - 1 /2" - Lineal Ref. No. 1 page 12, 13 & 14 Used on decorative insulating art glass in 1 ¾" door panels. PF1008 Interior Glazing Stop - 1 /2" - Curved Ref. No. 2 page 12, 13 & 14 Used on decorative insulating art glass in 1 ¾" door panels. PF1016 Interior Glazing Stop - 5 /8" - Lineal & Curved Ref. No. 1 & 2 page 12, 13 & 14 Used on dual pane 1 ¾" door panels. PF1755 Interior Glazing Stop - 15 /16" - Lineal & Curved Ref. No. 1 & 2 page 12, 13 & 14 Used on decorative insulating art glass in 2 ¼" door panels. PF1483 Interior Glazing Stop /16" - Lineal & Curved Ref. No. 1 & 2 page 12, 13 & 14 Used on single pane 1 ¾" door panels and dual pane 2 ¼" door panels. PF1011 Interior Glazing Stop /16" - Lineal & Curved Ref. No. 1 & 2 page 12, 13 & 14 Used on single pane 2 ¼" door panels. PF Andersen Clad Inswing Entry Doors (2001 to Present) 2013
19 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Panels Astragals Astragal (December 2010 to Present) Ref. No. 8 page 13 Replacement astragals are made to order. Weatherseal Astragal Cap To order, state: 1. Description of Part (astragal, including leftor right-hinged door panel) 2. Quantity 3. P number (from product label, see page 8) Astragal Tongue Astragal Cap - Aluminum Available in 21 standard and any custom color. PF2185 Astragal Tongue /4" Door Panel / Wood Used on 1 ¾" door panels. Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. PF2199 Astragal Tongue /4" Door Panel / Wood Used on 2 ¼" door panels. Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. PF Andersen Clad Inswing Entry Doors (2001 to Present) - 19
20 E N T R Y D O O R S Panels Astragal Cap - Stationary Door / Aluminum Ref. No. 5 page 14 Available in 21 standard and any custom color. PF2251 Astragal Tongue - Stationary Door / 1 ¾" Door Panel / Wood Ref. No. 5 page 14 Used on stationary 1 ¾" door panels. PF2253 Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. Astragal Tongue - Stationary Door / 2 ¼" Door Panel / Wood Ref. No. 5 page 14 Used on stationary 2 ¼" door panels. PF2318 Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white Andersen Clad Inswing Entry Doors (2001 to Present) 2013
21 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Panels Astragal (March 2007 to December 2010) Replacement astragals are made to order. Weatherseal Astragal Cap Astragal Tongue Astragal Cap - Aluminum (March 2007 to December 2010) Available in 21 standard and any custom color. PF1969 Astragal Tongue /4" Door Panel / Wood (March 2007 to December 2010) Used on 1 ¾" door panels. PF1963 Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. Astragal Tongue /4" Door Panel / Wood (March 2007 to December 2010) Used on 2 ¼" door panels. PF1983 Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white Andersen Clad Inswing Entry Doors (2001 to Present) - 21
22 E N T R Y D O O R S Panels Astragal (Prior to March 2007) Replacement astragals are made to order. Weatherseal Astragal Tongue Astragal Cap Astragal Cap - Aluminum (Prior to March 2007) Available in 21 standard and any custom color. PF1735 Astragal Tongue - 1 ¾" Door Panel / Wood (Prior to March 2007) Used on 1 ¾" door pane. Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. PF1730 Astragal Tongue - 2 ¼" Door Panel / Wood (Prior to March 2007) Used on 2 ¼" door panel. Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. PF1731 Astragal Bottom Seal (Prior to March 2007) Andersen Clad Inswing Entry Doors (2001 to Present) 2013
23 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Panels Decorative Raised Mouldings When using decorative raised mouldings the only lockset backset available is 2⅜". On 24" doors, raised mouldings will interfere with lockset. Exterior Decorative Raised Moulding Interior Decorative Raised Moulding Clad Inswing Entry Doors - Decorative Raised Mouldings Decorative Raised Moulding - Exterior / Lineal & Curved / Aluminum Available in 21 standard and any custom color. PF1555 Decorative Raised Moulding - Interior / Lineal & Curved / Wood Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. PF Andersen Clad Inswing Entry Doors (2001 to Present) - 23
24 E N T R Y D O O R S Panels Door Panel Parts Watershed - Aluminum Ref. No. 4 page 12, 13 & 14 Available in 21 standard and any custom color. PF2190 Door Sweep - 1 ¾" & 2 ¼" Door Panels Ref. No. 5 page 12 & 13 Used on active and passive doors. PF2188 Support Block - Stationary Doors / 1 ¾" & 2 ¼" Door Panels Ref. No. 6 page 14 Used on stationary doors. PF2247 Panel Cap Ref. No. 6 page 12 & 13 Used on active and passive doors. Available in 21 standard and any custom color. PF2122 Eyelet - AW / Passive Use with passive lock assembly Andersen Clad Inswing Entry Doors (2001 to Present) 2013
25 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Panels Door Sweep End Plug Door Sweep - 1 ¾" Door Panel (Prior to December 2010) Length 48" Door Sweep - 2 ¼" Door Panel (Prior to December 2010) Length 48" Andersen Clad Inswing Entry Doors (2001 to Present) - 25
26 E N T R Y D O O R S Grilles Interior and Exterior Grilles Full Divided Light Replacement interior and exterior grilles are made to order. All grille configurations are available with interiors and exteriors to match interiors and exteriors of windows. Permanent Exterior Permanent Interior With Spacer To order, state: 1. Description of Part (interior or exterior and type of grille) 2. Quantity 3. P number (from product label, see page 8) Simulated Divided Light Permanent Exterior Permanent Interior Permanent Exterior Removable Interior Easy Clean Options Removable Interior Finelight Between-the- Glass 26 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
27 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Grilles Grille Profiles - Wood Standard grille and divided light bars are for interior use only. Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. Standard Grille Bars Chamfer Style Roman Ogee Style Other 3 /4" PF1717 PF /8" PF1718 PF1829 GBD /8" PF1719 PF1830 Divided Light Bars Chamfer Style Roman Ogee Style 3 /4" PF /8" PF1721 PF /8" PF1722 PF /2" PF2050 PF /4" PF1723 Clad Inswing Entry Doors - Wood Grille Profiles 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 27
28 E N T R Y D O O R S Grilles Grille Profiles - Aluminum Aluminum divided light bars are for exterior use only. Available in 21 standard and any custom color. Divided Light Bars Chamfer Style Roman Ogee Style 3 /4" PF /8" PF1781 PF /8" PF1782 PF /2" PF /4" PF1783 Clad Inswing Entry Doors - Aluminum Grille Profiles Grille Profiles - Fibrex Fibrex divided light bars are for interior and exterior use. Available in 21 standard and any custom color. Divided Light Bars Chamfer Style 3 /4" PF /8" PF /8" PF /4" PF1626 Clad Inswing Entry Doors - Fibrex Grille Profiles 28 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
29 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Grilles Standard Grille Patterns Custom grille patterns are available. Colonial Renaissance Prairie Clad Inswing Entry Doors - Grille Patterns 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 29
30 E N T R Y D O O R S Grilles Grille Parts Grille Surround - 1 /2" - Lineal & Curved Used with PF1008 & PF1016 glass stop. Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. PF1108 Grille Surround - 5 /8" - Lineal & Curved Used with PF1755 glass stop. Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. PF1756 Grille Surround - 15 /16" - Lineal & Curved Used with PF1483 glass stop. Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. PF1871 Grille Surround /16" - Lineal & Curved Used with PF1011 glass stop. Available in pine, oak, mahogany, maple, cherry, Douglas fir, alder, and prefinished white. PF1230 Surround Clip 1364 End Clip - Grilles (September 2007 to Present) Color White Terratone Sandtone Forest Green Andersen Clad Inswing Entry Doors (2001 to Present) 2013
31 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Trim Set Illustration - GU / Active Use this active trim set with the GU active lock system. This trim set configuration has the deadbolt above the handle. Left-handed trim set shown below. Available from July 2007 to present with design change March Handle - Interior 2. Handle - Exterior 3. Escutcheon Plate - Interior 4. Escutcheon Plate - Exterior 5. Foam Gasket 6. Thumb Latch 7. Exterior Keyed Lock Cylinder Housing 8. Exterior Keyed Lock Cylinder 9. Exterior Keyed Lock Cylinder Plate 10. Spindle 11. Hex Wrench 12. Escutcheon Mounting Screws 13. Snap Ring 14. Plastic Washer 15. Keys 16. Exterior Keyed Lock Cylinder Plate Bolts 17. Handle Set Screw 18. Rubber O Ring Clad Inswing Entry Doors - Active Trim Set 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 31
32 E N T R Y D O O R S Hardware Trim Set Illustration - GU / Semi Active Use this semi-active trim set with the GU passive lock system. This trim set configuration has the deadbolt above the handle. Left-handed trim set shown below. Available from July 2007 to present with design change March Handle - Interior 2. Handle - Exterior 3. Escutcheon Plate - Interior 4. Escutcheon Plate - Exterior 5. Foam Gasket 6. Thumb Latch 7. Latch Tail Piece 8. Rubber O Ring 9. Handle Set Screw 10. Spindle 11. Hex Wrench 12. Escutcheon Mounting Screws 13. Snap Ring 14. Plastic Washer Clad Inswing Entry Doors - Semi-Active Trim Set 32 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
33 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Trim Set Illustration - GU / Dummy Use this dummy trim set with the GU lock system on stationary doors and passive doors with flush bolts. This trim set configuration has the deadbolt above the handle. Left-handed trim set shown below. Available from July 2007 to present with design change March Handle - Interior 2. Handle - Exterior 3. Escutcheon Plate - Interior 4. Escutcheon Plate - Exterior 5. Foam Gasket 6. Spindle Plate 7. Handle Set Screw 8. Spindle Plate Screw 9. Rubber O Ring 10. Spindle 11. Hex Wrench 12. Escutcheon Mounting Screws 13. Snap Ring 14. Plastic Washer Clad Inswing Entry Doors - Dummy Trim Set 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 33
34 E N T R Y D O O R S Hardware Trim Set Used with GU lock system. (July 2007 to Present - design change March 2012) Active Trim Sets (July 2007 to Present) Semi-Active Trim Sets (July 2007 to Present) Left Right Finish Satin Chrome Polished Brass Oil Rubbed Bronze Left Right Finish Satin Chrome Polished Brass Oil Rubbed Bronze Dummy Trim Sets (July 2007 to Present) Left Right Finish Satin Chrome Polished Brass Oil Rubbed Bronze Andersen Clad Inswing Entry Doors (2001 to Present) 2013
35 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Trim Set Illustrations - European / Active Use this active trim set with the Old GU active lock system (October 2001 to Present). The European configuration has the deadbolt below the handle. Left-handed trim set shown below. Was available from October 2001 to June Handle - Interior 2. Handle - Exterior 3. Escutcheon Plate - Interior 4. Escutcheon Plate - Exterior 5. Foam Gasket 6. Thumb Latch 7. Exterior Keyed Lock Cylinder Housing 8. Exterior Keyed Lock Cylinder 9. Exterior Keyed Lock Cylinder Plate 10. Spindle 11. Hex Wrench 12. Escutcheon Mounting Screws 13. Snap Ring 14. Plastic Washer 15. Keys 16. Exterior Keyed Lock Cylinder Plate Bolts 17. Handle Set Screw 18. Rubber O Ring Clad Inswing Entry Doors - European Active Trim Set 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 35
36 E N T R Y D O O R S Hardware Trim Set Illustration - European / Semi Active Use this semi-active trim set with the Old GU passive lock system (October 2001 to Present). The European configuration has the deadbolt below the handle. Left-handed trim set shown below. Was available from October 2001 to June Handle - Interior 2. Handle - Exterior 3. Escutcheon Plate - Interior 4. Escutcheon Plate - Exterior 5. Foam Gasket 6. Thumb Latch 7. Latch Tail Piece 8. Rubber O Ring 9. Handle Set Screw 10. Spindle 11. Hex Wrench 12. Escutcheon Mounting Screws 13. Snap Ring 14. Plastic Washer 12 Clad Inswing Entry Doors - European Semi-Active Trim Set 36 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
37 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Trim Set Illustration - European / Dummy Use this dummy trim set with the Old GU lock system (October 2001 to Present) on stationary doors and passive doors with flush bolts. The European configuration has the deadbolt below the handle. Left-handed trim set shown below. Was available from October 2001 to June Handle - Interior 2. Handle - Exterior 3. Escutcheon Plate - Interior 4. Escutcheon Plate - Exterior 5. Foam Gasket 6. Spindle Plate 7. Handle Set Screw 8. Spindle Plate Screw 9. Rubber O Ring 10. Spindle 11. Hex Wrench 12. Escutcheon Mounting Screws 13. Snap Ring 14. Plastic Washer 12 Clad Inswing Entry Doors - European Dummy Trim Set 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 37
38 E N T R Y D O O R S Hardware Trim Sets- European Used with old GU lock system. (from October 2001 to June 2007) Trim Set - European / Active (October 2001 to June 2007) Left Right Finish Satin Chrome Polished Chrome Polished Brass Antique Brass Oil Rubbed Bronze Dark Bronze Pewter White Trim Set - European / Semi-Active (October 2001 to June 2007) Left Right Finish Satin Chrome Polished Chrome Polished Brass Antique Brass Oil Rubbed Bronze Dark Bronze Pewter White Trim Set - European / Dummy (October 2001 to June 2007) Left Right Finish Satin Chrome Polished Chrome Polished Brass Antique Brass Oil Rubbed Bronze Dark Bronze Pewter White Andersen Clad Inswing Entry Doors (2001 to Present) 2013
39 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Shared Trim Set Parts Exterior Keyed Lock Cylinder - Active Ref. No. 8 page 31 & 35 Use on active trim sets only Specify finish when ordering. Brushed Nickel key cylinder for Satin Chrome, Polished Chrome, Pewter or White trim sets. Brushed Brass key cylinder for Polished Brass, Antique Brass or Oil Rubbed Bronze trim sets. Tail Piece Extension - Lock Cylinder / 2 ¼" Door Panel For 2 ¼" door panels with active trims sets Bolt - Escutcheon Mounting / 55mm / 1 ¾" Door Panels Ref. No. 12 page 31, 32, 33, 35, 36 & 37 Use for 1 ¾" door panels. Each trim set requires 2 screws. Finish Satin Chrome Polished Chrome Polished Brass Antique Brass Dark Bronze Oil Rubbed Bronze Pewter White Bolt - Escutcheon Mounting / 65mm / 2 ¼" Door Panels Ref. No. 12 page 31, 32, 33, 35, 36 & 37 Use for 2 ¼" door panels. Each trim set requires 2 screws. Finish Satin Chrome Polished Chrome Polished Brass Antique Brass Dark Bronze Oil Rubbed Bronze Pewter White Andersen Clad Inswing Entry Doors (2001 to Present) - 39
40 E N T R Y D O O R S Hardware Spindle - 8mm x 110mm / 1 ¾" Door Panels Ref. No. 10 page 31, 32, 33, 35, 36 & 37 Use for 1 ¾" door panels Spindle - 8mm x 120mm / 2 ¼" Door Panels Ref. No. 10 page 31, 32, 33, 35, 36 & 37 Use for 2 ¼" door panels Latch Tail Piece - Semi-Active Ref. No. 7 page 32 & 36 Use on semi-active trim sets only Spindle Plate Kit - Dummy Ref. No. 6 page 33 & 37 Use on dummy trim sets only Andersen Clad Inswing Entry Doors (2001 to Present) 2013
41 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Trim Set Parts - AW / 2 ¼" Door Panel These parts are used to adjust AW trim sets for application on a 2 ¼" thick door panel. Parts are compatible with Newbury, Covington, Yuma, Whitmore, Encino, Anvers, Albany, and Tribeca trim sets. AW trim sets available from your Andersen supplier. Bolt - Escutcheon Mounting / 65mm / 2 ¼" Door Panels #8-32 UNC x 65mm. For installing active, passive and dummy AW trim sets onto 2 ¼" door panels. Finish Antique Brass Bright Brass Brushed Chrome Distressed Bronze Distressed Nickel Oil Rubbed Bronze Polished Chrome Satin Nickel White Stone Gold Dust Black Spindle - 8mm x 4 ¼" / 2 ¼" Door Panels For installing active, passive and dummy AW trim sets onto 2 ¼" door panels Spindle - 8mm x 5 ¼" / 2 ¼" Door Panels For installing active, passive and dummy AW trim sets with 1 handle extender onto 2 ¼" door panels Spindle - 8mm x 6 ¼" / 2 ¼" Door Panels For installing active, passive and dummy AW trim sets with 2 handle extenders onto 2 ¼" door panels Lock Actuator - 2 ¼" Door Panel For installing active AW trim sets onto inswing 2 ¼" door panels Andersen Clad Inswing Entry Doors (2001 to Present) - 41
42 E N T R Y D O O R S Hardware Lock Assembly - AW Lock Assembly - AW / Active (July 2007 to Present) Single Point Active Lock Multi-Point Active Lock Height Range - Door Panel / AW / Active Lock Configuration Single Rectangular & All Double Doors Trim sets for this hardware can be purchased from your Andersen supplier. Single Arch Top (Leg Height) Single Springline (Leg Height) Single Lock 82" EFS Maximum 82" EFS Maximum 82" EFS Maximum 6' - 8" Multi-Point 76 1 /8" /32" 73 ¾" /32" 72 ⅛" /32" 8' Multi-Point 89 7 /8" - 98" 87 ½" - 95" 85 ⅞" - 95" Lock Mechanism - AW / Active / Single Point (July 2007 to Present) Lock Mechanism - AW / Active / Multi-Point (Mar 2012 to Present) AW multi-point active locks are not handed. Lock Mechanism - AW / Active / Multi-Point (July 2007 to Mar 2012) AW multi-point active locks are not handed. Clad Inswing Entry Doors - AW Active Lock Assembly Orientation Left Right Size 6' - 8" ' Size 6' - 8" ' Andersen Clad Inswing Entry Doors (2001 to Present) 2013
43 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Lock Assembly - AW / Passive (July 2007 to Present) AW passive locks are not handed. Trim sets for this hardware can be purchased from your Andersen supplier. Latch Block Latch Bolt Receiver Threaded Rod Extension Passive Lock Assembly Shoot Bolt End Shoot Bolt End Threaded Rod Extension Clad Inswing Doors - AW Passive Lock Assembly Lock Mechanism - AW / Passive (July 2007 to Present) Latch Bolt Receiver Assembly - AW / Passive Includes latch bolt receiver and latch block. (March 2012 to Present) Latch Bolt Receiver Assembly - Modified / AW / Passive (July 2007 to March 2012) Includes modified latch bolt receiver and latch block Shoot Bolt Ends - AW / Passive (November 2011 to Present) Threaded Rod Extension - ¼"- 20 UNC / Stainless Steel (November 2011 to Present) PF2566 Shoot Bolt Ends - AW / Passive (July 2007 to November 2011) 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 43
44 E N T R Y D O O R S Hardware Lock Parts - AW Strike Plate - AW / Active / Central (July 2007 to Present) Use with the active lock system on single doors Strike Plate - AW / Active / Multi-Point / Hook Bolt (July 2007 to Present) Use with multi-point locks Dust Cup - AW / Active / Hook Bolt (July 2007 to Present) Use behind hook bolt strike plates Eyelet - AW / Passive (July 2007 to Present) Use with passive lock assembly Shoot Bolt Cup - AW / Passive (July 2007 to December 2010) Use with the passive lock assembly Andersen Clad Inswing Entry Doors (2001 to Present) 2013
45 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Lock Assembly - GU Lock Assembly - GU / Active (July 2007 to Present) GU active locks are not handed. Locking Extension 250mm Short Extension 500mm Long Extension GU Active Multi-Point Lock Mechanism Height Range - Door Panel / GU / Active Clad Inswing Entry Doors - GU Active Lock Assembly Lock Configuration Single Rectangular & All Double Doors Single Arch Top (Leg Height) Single Springline (Leg Height) 6' - 8" Lock Mechanism 79" /32" 76 5 /8" /32" 75 1 /16" /32" 6' - 8" Lock with Locking Extension 89 9 /16" /32" 87 3 /16" /32" 85 5 /8" /32" 8' Lock Mechanism /16" /16" 89 7 /8" /32" 88 5 /16" / 32 " 6' - 8" Lock with Short & Locking Extension /32" /32" /16" /4" 95 3 /8" /32" 6' - 8" Lock with Long & Locking Extension /16" /32" /32" /16" /16" /32" 6' - 8" Lock with Short, Long & Locking Exten. 119" - 129" /32" - 126" 115" - 130" Lock Mechanism - GU / Active / Multi-Point (July 2007 to Present) Size 6' - 8" ' Extension - GU / Active / Locking (July 2007 to Present) Extension - GU / Active / Short (July 2007 to Present) Length = 250mm Extension - GU / Active / Long (July 2007 to Present) Length = 500mm Andersen Clad Inswing Entry Doors (2001 to Present) - 45
46 E N T R Y D O O R S Hardware Lock Assembly - GU / Passive (July 2007 to Present) GU passive locks are not handed. 500mm Long Extension 250mm Short Extension GU Passive Lock Mechanism Bottom Shoot Bolt Top Shoot Bolt Clad Inswing Entry Doors - GU Passive Lock Assembly Height Range - Door Panel / GU / Passive Lock Configuration E.F.S. Height Range Lock Mechanism with Shoot Bolts 79 1 /2" /32" Lock Mechanism with Shoot Bolts & Short Extension /16" /2" Lock Mechanism with Shoot Bolts & Long Extension /32" /32" Lock Mechanism with Shoot Bolts & Short & Long Extension /8" /32" Lock Mechanism with Shoot Bolts & (2) Long Extensions /16" /32" Lock Mechanism - GU / Passive (July 2007 to Present) Shoot Bolt - GU / Passive (July 2007 to Present) Orientation Top Bottom Extension - GU / Passive / Short (July 2007 to Present) Length = 250mm Extension - GU / Passive / Long (July 2007 to Present) Length = 500mm Andersen Clad Inswing Entry Doors (2001 to Present) 2013
47 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Lock Parts - GU Strike Plate - GU / Active / Central / Short Lip / Stainless Steel (July 2007 to Present) Used with active lock system on single doors with no interior jamb extension and double doors Strike Plate - GU / Active / Central / Medium Lip / Stainless Steel (December 2010 to Present) Used with active lock system on single doors with ⅝" interior jamb extension Strike Plate - GU / Active / Hook Bolt / Stainless Steel (July 2007 to Present) Used with active lock system Dust Cup - GU / Active / Hook Bolt (July 2007 to Present) Used behind hook bolt strike plates Shoot Bolt Cup - GU / Passive (July 2007 to December 2010) Used with passive lock assembly Andersen Clad Inswing Entry Doors (2001 to Present) - 47
48 E N T R Y D O O R S Hardware Lock Assembly - Old GU Lock Assembly - Old GU / Active (October 2001 to June 2007) Old GU active locks are not handed. 500mm Long Extension 250mm Short Extension 750mm Locking Extension Old GU Active Multi-Point Lock Mechanism Clad Inswing Entry Doors - Old GU Active Lock Assembly Lock Mechanism - Old GU / Active / Multi-Point (October 2001 to June 2007) Extension - Old GU / Active / Locking (October 2001 to June 2007) Length = 750mm Extension - Old GU / Active / Long (October 2001 to June 2007) Length = 500mm Extension - GU / Active / Short (October 2001 to June 2007) Length = 250mm 48 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
49 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Lock Assembly - Old GU / Passive (October 2001 to June 2007) Old GU passive locks are not handed. 500mm Long Extension 250mm Short Extension Bottom Shoot Bolt Top Shoot Bolt Old GU Passive Lock Mechanism Clad Inswing Entry Doors - Old GU Passive Lock Assembly Lock Mechanism - Old GU / Passive (October 2001 to June 2007) Shoot Bolt - Old GU / Passive (October 2001 to June 2007) Orientation Bottom Top Extension - Old GU / Passive / Short (October 2001 to June 2007) Length = 250mm Extension - Old GU / Passive / Long (October 2001 to June 2007) Length = 500mm 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 49
50 E N T R Y D O O R S Hardware Lock Parts - Old GU Strike Plate - Old GU / Central / Short Lip / Stainless Steel (October 2001 to June 2007) Use on double doors. This plate is not handed. Strike Plate - Old GU / Central / Medium Lip / Stainless Steel (October 2001 to June 2007) Use on units with sidelights. This plate is not handed. Strike Plate - Old GU / Central / Long Lip / Stainless Steel (October 2001 to June 2007) Use on single doors with up to a ⅜" interior jamb extension. This plate is not handed. Strike Plate - Old GU / Active / Hook Bolt / Stainless Steel (October 2001 to June 2007) This plate is not handed. Shoot Bolt Cup - Old GU / Passive (October 2001 to June 2007) Use this cup on passive lock assembly Andersen Clad Inswing Entry Doors (2001 to Present) 2013
51 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Flush Bolts Flush Bolt (November 2011 to Present) Trim Cover Flush Bolt Trim Cover - Flush Bolt (November 2011 to Present) Finish Brushed Chrome Flush Bolt Rod - ¼"- 20 UNC / Stainless Steel (November 2011 to Present) PF2566 Shoot Bolt End (November 2011 to Present) Andersen Clad Inswing Entry Doors (2001 to Present) - 51
52 E N T R Y D O O R S Hardware Flush Bolt (Prior to November 2011) This shoot bolt end was discontinued December Available upon request. Flush Bolt Shoot Bolt End Flush bolt supplied with shoot bolt end. Finish Satin Chrome 2132 White Dark Bronze Brass Eyelet (Prior to November 2011) 2228 Flush Bolt Rod - 5 /16" (Prior to November 2011) Shoot Bolt End (December 2010 to November 2011) Andersen Clad Inswing Entry Doors (2001 to Present) 2013
53 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Hinges Hinge - Adjustable (March 2012 to Present) Left hand hinge shown. Jamb Leaf Door Panel Leaf Clad Inswing Patio Doors - Adjustable Hinge Left Right Finish Black White Antique Brass Bright Brass Brushed Chrome Polished Chrome Distressed Bronze Distressed Nickel Oil Rubbed Bronze Satin Nickel Gold Dust Andersen Clad Inswing Entry Doors (2001 to Present) - 53
54 E N T R Y D O O R S Hardware Hinge - 4 ½" / Ball Bearing (September 2008 to March 2012) Hinges are non-handed. All hinges have non-removable pins (NRP). Non-Removable Pin (NRP) Set Screw Installed on product from September 2008 to December Available for replacement upon request. Finish White Polished Brass Oil Rubbed Bronze Brushed Chrome Stainless Steel Antique Brass Pewter Bright Chrome Black Hinge Shims - 4 ½" / Neoprene / 1 /32" & 1 /16" Thick (Prior to March 2012) 54 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
55 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Hardware Hinge - 4 ½" (July 2003 to August 2008) Left hand hinge shown. Non-Removable Pin (NRP) Set Screw Jamb Leaf Door Panel Leaf Hinge - 4 ½" Ball Bearing / Non-Removable Pin (July 2003 to August 2008) Left Right Finish Stainless Steel Dark Bronze White Hinge - 4 ½" Ball Bearing / Removable Pin (July 2003 to August 2008) Left Right Finish Polished Brass Hinge - 4 ½" Plain Bearing / Non-Removable Pin / Zinc Dichromate (July 2003 to March 2007) Left Right Andersen Clad Inswing Entry Doors (2001 to Present) - 55
56 E N T R Y D O O R S Hardware Screws - Hinge Mounting Screw - Door Panel Description Finish # ¾" FH Black White Polished Brass Stainless Steel Anchor Screw - Jamb Description Finish # " FH Stainless Steel Black White Polished Brass Machine Screw - Jamb Description Finish #10-24 UNC 3 /4" FH Black White Polished Brass Stainless Steel Tee Nut - Machine Screw / Jamb Description Finish #10-24 UNC 5 /16" - 3 /4" Dia. Stainless Steel Andersen Clad Inswing Entry Doors (2001 to Present) 2013
57 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Frames Frame Assembly - Active & Passive / 4 9 /16" Wall Jamb Member 2. Curved Head Jamb 3. Vinyl Insert 4. Aluminum Sill 5. Weatherseal 6. Installation Flange 7. Flexible Installation Flange 8. Interior Trim 8 Active and Passive Frame Assembly / 4 9 /16" Wall / 1 ¾" & 2 ¼" Thick Panels 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 57
58 E N T R Y D O O R S Frames Frame Assembly - Active & Passive / 6 9 /16" Wall Jamb Member 2. Curved Head Jamb 3. Vinyl Insert 4. Aluminum Sill 5. Weatherseal 6. Installation Flange 7. Flexible Installation Flange 8. Interior Trim 8 Active and Passive Frame Assembly / 6 9 /16" Wall / 1 ¾" & 2 ¼" Thick Panels 58 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
59 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Frames Frame Assembly - Stationary 1 ¾" panel with 4 9 /16" wall shown below Jamb Member 2. Curved Head Jamb 3. Vinyl Insert 4. Aluminum Sill 5. Panel Stop 6. Installation Flange 7. Flexible Installation Flange 8. Interior Trim 9. Sill Panel Stop 10. Curved Stationary Door Panel Stop 9 8 Stationary Frame Assembly / 4 9 /16" Wall / 1 ¾" & 2 ¼" Thick Panels 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 59
60 E N T R Y D O O R S Frames Sill Sill (December 2010 to Present) Sills come in gray and bronze. Sill Drain Cover Vinyl Insert Weep Hole Cover Interior Trim 4 9 /16" Sill Exterior Interior Weep Hole Cover Sill Drain Cover Vinyl Insert Interior Trim 6 9 /16" Sill Exterior Interior Thermal Break Flush Bolt Cup Low Profile Sill Exterior Interior Clad Inswing Entry Doors - Sill 60 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
61 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Frames Sill (Prior to December 2010) The adjustable threshold was obsolete as of February Use parts for the fixed inswing threshold for replacement. The solid wood threshold is available in oak and mahogany for 4 9 /16" and 6 9 /16" wall thicknesses. Fixed Cap Fixed Inswing Threshold Interior Trim Screw - Fixed Cap Installation Fixed Cap Solid Wood Fixed Threshold Interior Trim Screw - Fixed Cap Installation Adjustable Cap Adjustable Threshold (Obsolete) Interior Trim Fixed Cap - Wood (Prior to December 2010) Available in oak or mahogany. PF1890 Interior Trim - Wood (Prior to December 2010) Available in oak or mahogany. PF Andersen Clad Inswing Entry Doors (2001 to Present) - 61
62 E N T R Y D O O R S Frames Sill Parts Sill Insert - Vinyl Ref. No. 3 page 57, 58 & 59 Available in gray or black. PF2182 Cover - Weep Hole Color Gray Black Drain Cover - Sill / Modified Color Gray Black Strike Plate - Sill / Stainless Steel Used on double doors with standard sill Support Block - Strike Plate / Sill / Aluminum Used on double doors with standard sill Flush Bolt Cup - Flush Bolt / Low Profile Sill Used on double doors with low profile sill. Color Gray Black Andersen Clad Inswing Entry Doors (2001 to Present) 2013
63 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Frames End Cap - Sill / Vinyl Wall Thickness Color Orientation 4 9 /16" Gray Left Right Black Left Right /16" Gray Left Right Black Left Right Gasket - Sill / Internal / Non-Handed Color Wall Thickness Gray 4 9 /16" /16" Black 4 9 /16" /16" Gasket - Sill / External / Non-Handed Color Wall Thickness Gray 4 9 /16" /16" Black 4 9 /16" /16" Interior Trim - Sill / Vinyl & Wood Veneer Ref. No. 8 page 57, 58 & 59 Length = 86" Veneer Species Pine Oak Maple White - Painted Panel Stop - Sill Ref. No. 9 page 59 Used on stationary doors. Panel Thickness 1 ¾" PF ¼" PF Andersen Clad Inswing Entry Doors (2001 to Present) - 63
64 E N T R Y D O O R S Frames Extension Jambs Current inswing entry doors are only available for 4 9 /16" & 6 9 /16" wall thicknesses. 4 9 /16" Low Profile Sill must be extended to 6 9 /16". 2" Sill Extension 4 9 /16" Low Profile Sill Exterior Interior Clad Inswing Entry Doors - Low Profile Sill Sill Extension - Low Profile Sill / Inswing / Aluminum Used on 6 9 /16" inswing units with low profile sill. PF Andersen Clad Inswing Entry Doors (2001 to Present) 2013
65 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Frames Extension Jambs (Prior to December 2010) Side or Head Jamb 2" Jamb Extension 1 ⅛" Jamb Extension 5 ¼" Sill Extension Inswing Sill 1 ¼" Sill Extension 3 ¼" Sill Extension Jamb Extension - 1 ⅛" / Aluminum (Prior to December 2010) Available in 21 standard and any custom color. Use for wall thicknesses from 4 9 /16" to 5 11 /16". PF1510 Jamb Extension - 2" / Aluminum (Prior to December 2010) Available in 21 standard and any custom color. Use for wall thicknesses up to 6 1 /2". PF1448 Sill Extension - 1 ¼" / Aluminum (Prior to December 2010) Available in mill finish, bronze and anodized brass. Use for wall thicknesses from 4 9 /16" to 5 3 /16" PF1083 Sill Extension - 3 ¼" / Aluminum (Prior to December 2010) Available in mill finish, bronze and anodized brass. Use for wall thicknesses from 5 1 /4" to 7 3 /16" PF1084 Sill Extension - 5 ¼" / Aluminum (Prior to December 2010) Available in mill finish, bronze and anodized brass. Use for wall thicknesses from 7 1 /4" to 9 3 /16" PF Andersen Clad Inswing Entry Doors (2001 to Present) - 65
66 E N T R Y D O O R S Frames Frame Parts Door Panel Stop - Stationary / Lineal & Curved Ref. No. 5 & No. 10 page 59 Available in pine, oak, mahogany, Douglas fir, cherry, maple, alder, and prefinished white. PF1340 Weatherseal - Frame Ref. No. 5 page 57 & 58 Available in bronze and white. PF1371 Dust Plug - Frame / 1" 2" Corner Pad - Frame / 2" / Contoured Color White Beige Bronze Andersen Clad Inswing Entry Doors (2001 to Present) 2013
67 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Frames Brickmould - Lineal & Curved / Aluminum (December 2010 to Present) Available in 21 standard and any custom color. PF2088 Brickmould - Lineal & Curved / Aluminum (Prior to December 2010) Available in 21 standard and any custom color. KM34BM 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 67
68 E N T R Y D O O R S Joining Components Mullion Covers - Interior Mullion Covers - Interior / Horizontal & Vertical / Lineal & Curved / Wood Available in pine, oak, mahogany, Douglas fir, cherry, maple, alder, and prefinished white. Vertical mullion covers are ¼" thick and horizontal mullion covers are ⅜" thick. Lineal and curved have same order number. WMC38 shown below. Orientation Mullion Width Vertical (¼" Thick) Horizontal (⅜" Thick) Direct WMC14 ½" PF2037 ¾" PF2049 1" PF2033 2" PF ½" PF2306 Direct WMC38 ½" PF1663 ¾" PF2048 1" PF2011 2" PF ½" NA Mullion Cover - Interior / ⅜" Mullion / Vertical / Lineal & Curved / Wood (Prior to December 2010) Available in pine, oak, mahogany, Douglas fir, cherry, maple, alder, and prefinished white. PF2037 Mullion Cover - Interior / ⅜" Mullion / Horizontal / Lineal & Curved / Wood (Prior to December 2010) Available in pine, oak, mahogany, Douglas fir, cherry, maple, alder, and prefinished white. PF Andersen Clad Inswing Entry Doors (2001 to Present) 2013
69 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Joining Components Mullion Covers - Exterior All exterior mullion covers available in 21 standard and any custom color. Mullion Cover - Exterior / Direct Mullion / Aluminum PF2071 Mullion Cover - Exterior / ½" Mullion / Aluminum PF2074 Mullion Cover - Exterior / ¾" Mullion / Aluminum PF2075 Mullion Cover - Exterior / 1" Mullion / Aluminum PF2441 Mullion Cover - Exterior / 2" Mullion / Aluminum PF2076 Mullion Cover - Exterior / 3 ½" Mullion / Aluminum PF2077 Mullion Cover - Exterior / ⅜" Mullion / Aluminum (Prior to December 2010) PF Andersen Clad Inswing Entry Doors (2001 to Present) - 69
70 E N T R Y D O O R S Interior Casing Casing Profiles Interior casings are available in both lineal & curved and in pine, oak, mahogany, Douglas fir, cherry, maple, alder, and prefinished white. Interior Casing - Lineal and Curved / Wood / 2 ¼" WM-356 WM-376 WM ¼" Colonial WM ¼" Ranch Interior Casing - Lineal and Curved / Wood / 2 ½" WM-315 WM ½" Ranch 2 ½" Colonial Interior Casing - Lineal and Curved / Wood / 2 ¾" LN-366 PF Andersen Clad Inswing Entry Doors (2001 to Present) 2013
71 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Interior Casing Interior Casing - Lineal and Curved / Wood / 3 ¼" B1211 WM-445 Interior Casing - Lineal and Curved / Wood / 3 ½" WM-444 PF ½" Colonial AC3121 RB-3 LWM673 L-366 PF1030 PF1039 S4SFLAT 2013 Andersen Clad Inswing Entry Doors (2001 to Present) - 71
72 E N T R Y D O O R S Interior Casing Casing Parts Corner Block 3" 3" 3⅝" 3⅝" 4" 4" Species Pine Oak Mahogany Maple ⅝" 4⅝" Species Pine 1304 Oak 1305 Mahogany Maple Keystone 2⅞" 2⅞" 3¾" 3¾" 4½" 4½" Species Pine Oak Mahogany Maple Andersen Clad Inswing Entry Doors (2001 to Present) 2013
73 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Interior Casing Plinth Block - Arch 2 7 / 8" 4" 3 7 / 8" 5 1 / 4" Species Maple Oak Mahogany Douglas Fir Cherry Plinth Block 2 7 / 8" 2 7 / 8" 3 7 / 8" 3 7 / 8" Species Maple Oak Mahogany Douglas Fir Cherry Andersen Clad Inswing Entry Doors (2001 to Present) - 73
74 E N T R Y D O O R S Installation Components Installation Components Anchor Screw - Jamb Description Finish # " FH Stainless Steel Black White Polished Brass Installation Clips - 6" Installation Flange - Lineal Ref. No. 6 page 57, 58 & 59 PF2079 Installation Flange - Flexible Ref. No. 7 page 57, 58 & 59 PF2080 Flexible Drip Cap Color White Beige Andersen Clad Inswing Entry Doors (2001 to Present) 2013
75 Andersen Clad Inswing Entry Doors (2001 to Present) Single and Double Doors Installation Components Drip Cap - Aluminum PF2085 Clip - Sill / Stainless Steel Corner Gasket - Installation Flange Straight Gasket - Installation Flange Andersen Clad Inswing Entry Doors (2001 to Present) - 75
76 E N T R Y D O O R S Notes 76 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
77 Andersen Clad Inswing Entry Doors (2001 to Present) Service Replacement Service Replacement Parts Service Parts Weatherseal - Long Reach / 97" Color White Bronze Corner Pad - 3 /16" x 2" Color White Bronze Corner Pad - 3 /8" x 2" Color White Bronze Shoot Bolt Receiver - Adjustable / Passive Lock (Prior to December 2010) Use with passive lock system. Replaces shoot bolt cup when adjustment is required. Use 5 /16" hex wrench to install and adjust Transition Strike Plate - Flush Bolt (Prior to December 2010) Use with flush bolts Touch-Up Paint ½ fl. oz bottle. Color White Terratone Sandtone Forest Green Andersen Clad Inswing Entry Doors (2001 to Present) - 77
78 E N T R Y D O O R S Notes 78 - Andersen Clad Inswing Entry Doors (2001 to Present) 2013
Sidelights & Transoms for A-Series Hinged Doors
Sidelights & Transoms for A-Series Hinged Doors Parts Catalog Main Menu Section TOC Search What s in This Section Sidelights & Transoms............................................. Page 3 Parts Illustration...........................................................
SECTION REFERENCE. Tilt-Wash Double-Hung. Insert Windows. 400 Series
SECTION REFERENCE Size Ranges... 96 Existing Window Measurements... 96 Divided Light Patterns... 97 Window Details... 97 Joining Details... 97 Performance Data... 269 400 Series Windows TILT-WASH DOUBLE-HUNG
Combination & Screen Doors
Combination & Screen Doors www.bbwood.com WOOD SCREEN DOORS Removable Screens (RS) SPECIFICATIONS: Stiles and Top Rail 2-9/16 Cross Rails Bottom Rail Vertical Mull 7/8 #206 #201 58-RS 764-RS V52-RS 2 2
1-1. Casement and Awning Window
Casement and Awning Window Casement Low maintenance exterior Easy to operate Slim frame and sash profile maximize the field of view Excellent for creating window combinations, as well as bays and bows
Casement/Awning Window Parts Reference Catalog
Casement/Awning Window Parts Reference Catalog (Includes Miscellaneous Parts for Eyebrow Casement and Garden Bay Windows) #1028654 (Revised 03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100
PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY
PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Buffalo Forge Steel Doors / Round Top Single PRODUCT TYPE: In-swing Round Top Single Door RH-4 Title Uniform Load Deflection Test
Installation Guide for Andersen Architectural Wood Inswing Entry Doors
Installation Guide for Andersen Architectural Wood Inswing Entry Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance are
SECTION 08 14 00 WOOD DOORS (ANDERSEN 200 SERIES HINGED PATIO DOORS-INSWING)
SECTION 08 14 00 WOOD DOORS ( ) PART 1 - GENERAL SPECIFIER NOTE: DATA CONTAINED IN THIS GUIDE SPEC IS ACCURATE AS OF AUGUST 2007. DUE TO ONGOING PRODUCT CHANGES, THIS DATA MAY CHANGE OVER TIME. CONSULT
Sierra Pacific Windows
Sierra Pacific Windows Bi-Fold Windows & Doors Sierra Pacific Bi-fold Windows and Doors glide smoothly to create large openings that transform your living spaces. With panels folding and stacking either
Flexivent Windows (1952 to 1979)
Flexivent Windows (1952 to 1979) Parts Catalog Main Menu Section TOC Search What s in This Section Standard Windows................................................ Page 3 Parts Illustration...........................................................
Call for Availability
A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You
SECTION 08 52 00 WOOD WINDOWS (ANDERSEN ARCHITECTURAL CASEMENT AND AWNING WINDOWS)
SECTION 08 52 00 ( ) PART 1 - GENERAL SPECIFIER NOTE: DATA CONTAINED IN THIS GUIDE SPEC IS ACCURATE AS OF AUGUST 2007. DUE TO ONGOING PRODUCT CHANGES, THIS DATA MAY CHANGE OVER TIME. CONSULT MANUFACTURER
PERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY
Architectural Testing PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Mahogany Entry Door PRODUCT TYPE: 6' x 8' Double Outswing Hardwood TDL Door with Half Circle TDL Transom
Vinyl Patio Door Systems
Vinyl Patio Door Systems Swing Patio Door Multi-point locking system anchors the door in three separate points along the door length. Activating the deadbolt lock provides maximum security. Swing Patio
Garden Windows Builders Vinyl
TABLE OF CONTENTS Specifications... 8-2 QuickSpecGuide... 8-3 Elevations/Sizes: 1/4 Scale GardenUnits... 8-4 Grille Patterns... 8-5 SectionDetails: 6 Scale... 8-6 December 2008 JELD-WEN reserves the right
SECTION 6. Glass Storefront Doors:
SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail
400 SERIES 2 00 SERIES 1 0 0 S E R I E S REPLACEMENT SOLUTIONS FOR PROFESSIONALS
2 00 SERIES 1 0 0 S E R I E S REPLACEMENT SOLUTIONS FOR PROFESSIONALS Andersen repla cement caseme nt window s are availa ble wi thout a nailing fl a n g e for easy installation. PRODUCTS FOR REPLACEMENT.
Decorative Iron. Antique Flemish Reeded. 36" x 96" x 2¼" doors shown with Antique insulated glass
Ol d world european Step through a door from Pella s Old World European Collection. Go back in time to a place where opulence and luxury were esteemed, beauty and drama were expected, and protection and
Window Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
glass & Glazing Products
glass & Glazing Products WallMaker Create an unlimited variety of bright, beautiful and secure interior environments with the easy-to-install Stylmark WallMaker glass wall system. This versatile system
Clad Direct Glaze Window Installation Instructions
Clad Direct Glaze Window Installation Instructions Sill flashing and sealing: 2. An overview of the proper flashing sequence is shown in figure 1. Please read entire installation instructions carefully
Residential Garage Door Terminology
A Air Infiltration: The leakage or passage of air through a door system Anodize: A hard non-corrosive oxide film on the surface of aluminum Astragal: A compressible or deformable seal provided on the bottom
CLEAR-DIVISIONS CENTERFOLD
CLEAR-DIVISIONS CENTERFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS CENTERFOLD moveable The yellow highlighted areas in
An ASSA ABLOY Group brand. 4800LN Series. Interconnected Locks
An ASSA ABLOY Group brand 4800LN Series Interconnected Locks performance meets style introduction The Yale 4800LN series interconnected locksets combine our key-in-lever locksets with the added safety
Installation Guide for Andersen Architectural Clad Outswing Commercial Doors
Installation Guide for Andersen Architectural Clad Outswing Commercial Doors Congratulations! You have just purchased one of the many fine Andersen products. Proper assembly, installation and maintenance
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
Reachout Lock Replacement for Andersen 2-Panel and 4-Panel 400 Series Frenchwood Gliding, 200 Series Narroline, and Perma-Shield Gliding Patio Doors
for Andersen 2-Panel and 4-Panel 400 Series Frenchwood Gliding, 200 Series Narroline, and Perma-Shield Gliding Patio Doors Thank you for choosing Andersen. For questions call 1-888-888-7020. For more information
DE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
CLEAR-DIVISIONS VARIOFOLD
CLEAR-DIVISIONS VARIOFOLD Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS VARIOFOLD moveable The yellow highlighted areas in the
All-Season Sunroom Sliding Glass Door Installation Instructions
ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary
Guide to Ordering Hurd Replacement Glass, Sash, or Window & Door Parts
Guide to Ordering urd Replacement, Sash, or indow & Door Parts If you have this form in hand, you are in need of a replacement part for your urd window or door. And, your first question is likely, how
Heavy Glass Frameless Shower Door With Return Panel
202 Anderson Ave., elvue, KS 66407 Phone: 800-669-9867 Fax: 800-393-6699 www.onyxcollection.com Heavy Glass Frameless Shower Door With Return Panel Full Showers with Return ench Seat with Return FRLSDRPL-0116
Rose Door Handles. We take the worry out of protecting what s valuable to you. Lockwood: no worries. www.lockweb.com.au
Rose Door Handles We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents Robert Watson Series 20 Symphony Series 1420 Symphony Series 1360 Series Door
Therma-Tru Slim-Line Sliding Patio Door. Assembly and Installation
Therma-Tru Slim-Line Sliding Patio Door Assembly and Installation Read all instructions before starting. Builder or subcontractor, please forward these instructions to the homeowner. The applicable standards
Premier & Deluxe 3-Season Room Sliding Glass Door
DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL
HALE PET DOOR INSTALLATION INSTRUCTIONS HALE STANDARD PANEL MODEL Please read these instructions carefully and completely before attempting to install Hale Pet Doors; they will guide you through the steps
SECTION 08 14 00 WOOD DOORS (ANDERSEN 400 SERIES FRENCHWOOD HINGED INSWING AND OUTSWING WOOD PATIO DOORS, SIDELIGHTS AND TRANSOMS)
SECTION 08 14 00 ( OUTSWING WOOD PATIO DOORS, SIDELIGHTS AND TRANSOMS) PART 1 - GENERAL SPECIFIER NOTE: DATA CONTAINED IN THIS GUIDE SPEC IS ACCURATE AS OF SEPTEMBER 2007. DUE TO ONGOING PRODUCT CHANGES,
Installation Instructions and Ordering Information
The Flush Finish Trimless Door Frame Installation Instructions and Ordering Information CLEAN LINES! The Flush Finish Door Jamb System Manufactured by STUDCO Building Systems Step 1 Verify if you are using
2.02. Specifications. General. Products. Execution. Offset Pivots P-694 Top and Bottom Pivots
2.02 Standard Specifications General Entrances Description Furnish all necessary materials, labor and equipment for the complete installation of aluminum entrance doors, door frames and hardware as shown
CLEAR-DIVISIONS APERTO
CLEAR-DIVISIONS Introduction: The following three (3) part specification offers the Standard and Optional features for the CLEAR-DIVISIONS moveable glass wall system. The yellow highlighted areas in the
MGB Chrome Bumper Conversion
MGB Chrome Bumper Conversion Installation Instructions For 1974 1/2-1980 MGB This kit requires cutting, welding, and painting. Professional installation recommended. Note: Every MGB body is slightly different
Important Information for Installer & Homeowner
Important Information for Installer & Homeowner Homeowner: Please keep this information for your records, do not discard! Installation Instructions for Wood Frame Construction Replacement (See other side
Decorative Lever Designs
Decorative Lever Designs 3 & C 4 & K 12 14 & D 15 & A 16 & B 17 50 51 52 53 54 55 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 2 www.stanleysecuritysolutions.com
n Three 4 x 4 butt hinges per door - prevents wracking and assures smooth positive operation n Heavy duty 16 gauge steel frame
Weather Fin and bulb help keep bad weather outside and good air inside Windows: n Many light kits are available 1-LU 4 X 48 1-LE 16 X 16 1-LA 20 X 24 1-LI 20 X 24 1-B 22 X 36 1-LW 16 X 16 W/GRID 9-LB 22
Parts & Service Guide.
service. Parts & Service Guide. www.allsco.com Casement/Awning Hardware Brackets...Starting on Page 1 Roto Frank Awning Bracket Roto Frank Face Mount Bracket truth Brackets 1 truth Brackets 2 truth Brackets
Sun Windows General Information Sun New Construction Window Installation Instructions
Sun Windows General Information Section 1 G F H H H A. Apply Weather Resistive Barrier B. Apply Sill Flashing Tape C. Place Waterproof Sill Shims D. Caulk Back of Nail Fin Sides & Top, Set Window, Fasten
It s time to fall in love with your home all over again.
It s time to fall in love with your home all over again. US PLAN X IT ent Renewal by Andersen offers more products, more colors, more special features and more innovation in window and door replacement
Door Hardware Lock Specifications
Door Hardware Lock Specifications Directory Lock Type Page Exterior Mortise Lock Specifications... 2 2.5 Backset Mortise Locks Specification... 3 2.5 Backset Mortise Lock Functions (6301, 6310, 6315, 6318,
Information Technology Solutions
Information Technology Solutions Aluminum Sliding Door Assembly Instructions Shield Doors & Windows Bi-fold Door Assembly Instructions For Support Please Call 03 8339 2252 Aluminum Sliding Door Assembly
VISCO WEATHER SEAL PRODUCTS. VISCO Weather Seal Products 7 Victory Avenue Johnston, RI 02919 1-800-628-9680 www.viscoproduct.com
VISCO Weather Seal Products 7 Victory Avenue Johnston, RI 02919 1-800-628-9680 www.viscoproduct.com INTRODUCTION Visco Produces Industry-Leading Weather Seal Products Visco Weather Seal Products has 50
Hinge, Blocker, and Tab Adjustment Guide
Hinge, Blocker, and Guide for Andersen A-Series Hinged Outswing; 400 Series Frenchwood Hinged Outswing Patio Doors and 400 Series Frenchwood Hinged Outswing Patio Doors with Stormwatch Protection Hinge,
Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows
Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows americancraftsmanwindows.com Project Requirements: Read
ILLUSION FRAMELESS SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS
PREPARATION Approximate Installation Time: Tools Required for Installation: 60 minutes Hacksaw Electric Drill 3/16 Masonry Bit Pencil/Felt tip pen Safety Glasses Measuring Tape Masking Tape Standard Screw
PRODUCT GUIDE Vinyl Patio Doors (JPG008)
This guide contains procedures for common user serviceable repair tasks found on vinyl patio doors. If a condition arises that is not covered in this guide, please contact us for professional help. This
INSTALLATION INSTRUCTIONS for Bifold Doors (JII103)
Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for premium composite, hollow and solid core molded Bifold Doors. Bifolds are designed for fast
Sliding Door Locks & Hardware. 5 c
5 Sliding Door Locks & Hardware 5 c 3 4 6 8 9 Sliding Door Lever Lock Sliding Lever Lock Features Ordering String Sliding Lever Lock Series SLL Functions Trim Sets Specifications 2016 02 2 FSB North America
Eggers meticulously-crafted door frames are rivaled only by their beauty, quality and lasting performance. Turning nature s beauty into works of art
D O O R F R A M E S Eggers meticulously-crafted door frames are rivaled only by their beauty, quality and lasting performance. Turning nature s beauty into works of art D O O R F R A M E S Eggers Industries
We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden window unit.
Important Information for New Construction Installations Attention Installer! We urge you to read and follow the attached installation instructions. Failure to do so may void the warranty of this garden
Brick Veneer Construction
Brick Veneer Construction Check list of suggested tools & support items Claw hammer Tape measure 3/4" [19 or 20] Wood chisel Wood or plastic shims Pry bar Utility knife Caulking and caulking gun Power
vinyl replacement windows LOOKING FOR VINYL REPLACEMENT WINDOWS? Standard Features easy, trouble-free operation. window material formulated and
vinyl replacement windows LOOKING FOR VINYL REPLACEMENT WINDOWS? We are confident that we carry a style and size to suit your application. You can be sure that your investment will add value to your home,
INSTALLATION OF A BAY WINDOW
INSTALLATION OF A BAY WINDOW Installation of a Bay Window These instructions relate to the replacement of an existing bay window or replacement of a straight window with a new bay window, in an opening
Glossary. 1/3 1/3 1/3 - Configuration of a vent-fixed-vent (xox) window in which the vents and fixed panel are equal sizes
Glossary 1/3 1/3 1/3 - Configuration of a vent-fixed-vent (xox) window in which the vents and fixed panel are equal sizes 1/4 1/2 1/4 - Configuration of a vent-fixed-vent (xox) window in which the vents
home style pattern book Craftsman Bungalow An Arts & Crafts Selection from the Andersen Style Library
home style pattern book Craftsman Bungalow An Arts & Crafts Selection from the Andersen Style Library home style pattern book Craftsman Bungalow An Arts & Crafts Selection from the Andersen Style Library
Can you design a frameless shower enclosure that doesn't leak?
Can you design a frameless shower enclosure that doesn't leak? With proper design and installation frameless shower enclosures should not have any problems with water leakage, but they are not 100 percent
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
PHA 2000 PHB 3000 EXIT PAD
PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER
A Complete Solution CREATING WALLS THAT DEFINE SPACE
A Complete Solution CREATING WALLS THAT DEFINE SPACE COMPANY HISTORY CLIPPER WALL Clipper partitions are part of the Saint- Gobain Group, one of the worldwide leaders in the construction products industry.
Narrow stile lock 1314
3 2 4 6 6 1 3 2 4 4 5 3 2 4 3 5.... ( (. ). ) 11 12 5 3 5 4 8 1 6 20 8.5 6.5 19 Backset 15 3 5 2 1 5 2 5 5 0 8 9 2 8 1 1 21-1mm 12 8 24 1 6 8 1 ( 9 2 5 ) ) ). ) Narrow stile lock 1314 CE EN 12209 2 4 5
MIAMI-DADE COUNTY PERFORMANCE TEST REPORT. Report No.: B8049.01-401-18. Rendered to: AMERICAN PRODUCTS, INC Tampa, Florida
Architectural Testing MIAMI-DADE COUNTY PERFORMANCE TEST REPORT Report No.: B8049.01-401-18 Rendered to: AMERICAN PRODUCTS, INC Tampa, Florida PRODUCT TYPE: Aluminum Storefront with Double Doors SERIES/MODEL:
www.hammondmfg.com General Accessories Hardware
Heavy Duty Door Clamping Junction Box Padlock Kit Quick Release Clamp Replacement hardware for use on all 1418 and 1447 Series enclosures. Formed heavy gauge stainless steel clamp with stainless steel
InsulView Window Installation Instructions
InsulView Window Installation Instructions 1. The entire building is normally sheeted with the 2" 2 ½ OR 3 wall panel and the windows installed at a later time. A window retrofit of an existing building
How To Test For An Architectural Test
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Rendered to: CORAL ARCHITECTURAL PRODUCTS SERIES/MODEL: PW 256 with Door Openings PRODUCT TYPE: Aluminum Impact Resistant Curtain Wall System
Standard Design TKLP Cab
Standard Design TKLP Cab ThyssenKrupp Elevator s Laminated Plastic cabs are a beautiful blend of style and functionality. The standard cab, as included with our Pre-engineered and SPF elevator packages,
Storm Door Parts & Hardware
Storm Door Parts & Hardware Vendor # 60259501 SOM 300056 EMCO P/N 38787 OCTOBER 2014 PRODUCT SUPPORT Store Service Helpline....1-866-466-3578 Monday Friday....7 a.m. 6 p.m. CST Saturday...8 a.m. 3:30 p.m.
REDI-EXIT COMMERCIAL FIRE DOOR AND EXTERIOR DOOR KITS INSTALLATION GUIDELINES
REDI-EXIT COMMERCIAL FIRE DOOR AND EXTERIOR DOOR KITS INSTALLATION GUIDELINES Tools Required Tape Measure Hammer Slotted Screw Driver #2 & #3 Philips Screw Driver 3-4 Foot Level 12 Pry Bar Cold Chisel
western transforming space window systems series 670 a new option for hinged window line
western window systems a new option for transforming space series 670 hinged window line Western Window Systems a new way to live, a better way to build Since opening in 1959 in Phoenix, Western Window
INSTALLATION INSTRUCTIONS for Premium Pocket Windows (JII022) IMPoRtaNt INFoRMatIoN & glossary. safety & HaNdlINg
Thank you for selecting JeLd-weN products. Attached are JeLd-weN s recommended installation instructions for pocket (replacement) double-hung, casement, awning, picture or transom windows, designed to
Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows
Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows Viewed from the exterior. IMPORTANT: Please read before you begin installation. TABLE OF CONTENTS AND TOOL / MATERIAL
WHI 90-Minute Rated Veneered Door Frame Installation Instructions
No. 940-03-10 INSTALLATION INSTRUCTIONS 90 MINUTE RATED VENEERED DOOR FRAME DOOR REQUIREMENTS: Consult the door manufacturer to make sure that the doors are qualified for the hardware to be installed,
Key in Knob & Key in Lever
Key in Knob & Key in Lever We take the worry out of protecting what s valuable to you. Lockwood: no worries www.lockweb.com.au Contents 530 Series Key in Knob & Key in Lever Door Furniture Locksets 930/950
SPIRAL STAIR KIT INSTALLATION MANUAL
SPIRAL STAIR KIT INSTALLATION MANUAL Effective January 1, 2014 If you have any questions, please call the location that your Stair Kit was purchased from: Broomall, Pennsylvania 1-800-52-7427 Ontario,
Technical data sheet PVC Bi-fold doors
Standard Specifications White internally beaded, Deceuninck 3000 series profile 28mm Low-e toughened sealed units with argon gas Open in doors with white handles and hinges Tracks are fitted to the top
Astragal: a vertical member placed at the meeting edges of a double door to provide a weather seal and may be used to anchor the fixed door.
Window and Door Dictionary AAMA: American Architectural Manufacturers Association. A national trade association that establishes voluntary standards for the window, door, and skylight industry. Ambient
INSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
Fabrication Illustration Part No. Description Door Frame. P092 Mortised Butt Hinge P092D P092F (includes P2092 $ 48 $ 21 frame/door reinforcing)
Custom Blank Entrances - Applied Hardware & Preps - Tubelite Standard Hardware Butt Hinges Pivots C2 Page 1 P092 Mortised Butt Hinge P092D P092F (includes P2092 $ 48 $ 21 frame/door reinforcing) P795S
Sarasota Splash Back Prep and Shine Paint Restorer Inside Front Cover
Caution: Read entire label before using product. Do-It-Yourself PAINT RESTORER KIT Kit Contains: 1-16 oz. Water-based, Biodegradeable Liquid Prep 1-16 oz. Aerosol Shine Spray 1 - Spray Nozzle 2 - Scrub
CHECKLIST FOR DOOR HARDWARE
CHECKLIST FOR DOOR HARDWARE HINGES: Except for residential and light commercial use all hinges should be ball-bearing/oil impregnated type Hinges on exterior doors should be non-ferrous with non-removable
Mini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
PHONE 800.496.0204 PHONE 310.639.0390 FAX
Section ARTFORM COLLECTION Sculptured Coat Racks Hat & Coat Hooks Hat & Coat Hook Bars with Multiple Hooks Coat Trees, Racks & Hangers Parallel - Horizontal & Vertical Mirror, Coat Hooks & Shelf Model
2006-2007 Safeguard Storm Doors Beauty, the security of advanced design, and the guarantee of a lifetime.*
2006-2007 Safeguard Storm Doors Beauty, the security of advanced design, and the guarantee of a lifetime.* 6 Designs To choose! Like all classic designs, Elite embraces balance and proportion while using
PANELIZED HOME INSTALLATION GUIDELINE
PANELIZED HOME INSTALLATION GUIDELINE A typical home package will be constructed of Snap-N-Lock Insulated Panels clad with steel skins. 4" panels will be used for the walls, and 6" panels for the roof.
Series 3502 Thermal Series 3902 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window
Windows Curtain Walls Entrances Storefronts Series 3502 Thermal Series 3902 Fixed Thermal 3 1 4 Architectural Grade Horizontal Sliding Window Configurations XO OX XOX Fixed Series 3502 retains an AAMA
BASIC FIRE DOOR REQUIREMENTS TECHNICAL DATA SHEET NO. 401
BASIC FIRE DOOR REQUIREMENTS SHEET NO. 401 Fire door openings are classified by their locations in the building. The location determines the length of exposure protection required, based on the potential
What locks do I have Timber Doors
What locks do I have Timber Doors Introduction Locking mechanisms on doors are varied and it can be difficult to judge whether what you have is good, bad or indifferent. This information takes you through
CONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
INSTALLATION INSTRUCTIONS IMPERVIA (Vent and Fixed) AWNING, CASEMENT, and LARGE AWNING WINDOW WITH FINS
2009 Pella Corporation INSTALLATION INSTRUCTIONS IMPERVIA (Vent and Fixed) AWNING, CASEMENT, and LARGE AWNING WINDOW WITH FINS Part Number: 80WH0100 Installation Instructions for Typical Wood Frame Construction.
Basic Technical Fundamentals of Builders Hardware
Basic Technical Fundamentals of Builders Hardware Mortise Locks Bored Locks Auxiliary Locks Inside Cover (blank) Table of Contents SARGENT History...4 Basic Name of Products...5, 6 Doors (A Brief Review)...7
DESIGN AND CONSTRUCTION GUIDELINES AND STANDARDS DIVISION 8 DOORS AND WINDOWS 08 50 00 WINDOWS
SECTION INCLUDES Metal Windows Vinyl/Aluminum Clad Wood Windows Solid Fiberglass and Vinyl Windows Wood Windows (Historic Preservation only) RELATED SECTIONS 02 83 00 Lead Paint Remediation 06 10 00 Rough
Active and Passive Sash Replacement
for Andersen Gliding Windows Read all instructions carefully before attempting this procedure. If you have any questions about your ability to complete the procedure, call Andersen at 1-888-888-7020 for