The teach-in lathe New generation SE
New generation SE Description Friendly user lathes with high chip removal capacity The SE Series combines the working capacity of a conventional lathe with the advantages of a CNC one. The SE are easy to use lathes that make possible the production of short series of pieces, prototyping or training centers, thanks to the Siemens or Fagor controls that allow the programming in both conversational and ISO languages. The CNC lathes of the SE Series are accurate and robust machines, satisfying the most demanding working conditions, beside the SE is characterized by its chip removal capacity as consequence of the electronic variable speed drive and the high torque provided by the three-speed gear box.
Standard accessories >SIEMENS 88D Advanced >Trajectory graphics >Profile editor >Electronic hand wheel for the X axis and Z axis >Electronic variable speed drive with 3 ranges >Manual quick change tool post with tool holders >Manual tailstock >Coolant equipment >Automatic lubrication of the slide ways >Main spindle reducing bush and dead centres >Chip collecting tray >Work light >Tower lamp >Enclosure as per EC standards >Leveling plates >Instruction manual >CE compliant IN PINACHO WE BELIEVE THAT SUCCESS CAN BE ACHIEVED THROUGH DELIVERING HIGH QUALITY PRODUCTS. OUR GOAL IS TO OBTAIN THE EXCELLENCE OF OUR MACHINES IN ORDER TO SATISFY THE MOST DEMANDING CUSTOMERS
Diversity of controls SIEMENS 88D Advanced >7.5 color display >Simple and intuitive operator interface >Wide range of technology cycles >High performance and precision >USB plug and play port >RS232C port >Ethernet RJ45 >Optional software Manual Machine Plus
FAGOR 837 TC FAGOR 855i/FL-TC > 7.5 LCD color display > ISO & conversational language programming > Interactive editor in machining canned cycles > Teach-in editing > Tool Inspection > USB plug and play port > DNC for PC communication. RS232 > Flash memory 128MB
Pinacho uses the best raw materials > All castings are grey pearlitic cast iron GG2/25 all made in Pinacho s foundry > Beds are induction hardened and slide ways ground; the hardness is 4-45 HB/ 43 HRC > Gears made of F155 steel > Bearings SKF, FAG and TIMKEN > Hardened and ground steel spindles > The complete package of control, X & Z servo-motors and drivers is original from the control brand: Fagor or Siemens
Optional accessories > Controls Fagor 837 TC y 855i/FL-TC > Larger spindle bore options up to 155 mm > 4, 8 or 12 positions automatic turret > Self-centering and independent 3 or 4 jaws chuck > Hydraulic chuck and tailstock > Rear chuck > Steady rest and follow rest > Hydraulic steady > Automatic or semi-automatic bar feeder > 6 Bar coolant pump > Portable hand wheel > Casting pedestals > Chip conveyor > Part catcher > Renishaw tool setter Larger spindle bore up to 155 mm Hydraulic chuck Chip conveyor Automatic 8 station turret Note: The availability of some of the listed accessories depends on the installed control model
Torque & power characteristic curves, SE SE-2 > Ø42 POWER (kw) 4,5 4 4 3,5 3 2,5 2 1,5 1,5 4 345 115 RPM 5 1 15 2 25 TORQUE (Nm) 8 75 7 24 6 5 4 3 2 81 POWER (kw) 6 5,5 5 4 3 2 1 SE-25 > Ø58 4 31 84 RPM 5 1 15 2 TORQUE (Nm) 14 116 412 12 1 8 6 4 2 152 POWER (kw) 6 5,5 5 SE-25 > Ø15 4 3 2 1 85 2 465 RPM 2 4 6 8 1 12 TORQUE (Nm) 16 149 12 1 8 55 24 14 6 4 2 R1: Power/Potencia S1 (kw) R2: Power/Potencia S1 (kw) R3: Power/Potencia S1 (kw) Torque/Par S1 (Nm)
Torque & power characteristic curves, SE 6 5 4 3 2 1 RPM POWER (kw) 8 7,5 7 SE-325 > Ø8 TORQUE (Nm) 25 3 24 63 2 4 6 8 1 12 14 16 18 215 15 1 71 27 2 5 6 5 4 3 2 1 RPM POWER (kw) 8 7,5 7 85 2 465 SE-325 > Ø15 2 4 6 8 1 12 251 99 365 3 25 2 15 1 5 6 5 4 3 2 1 RPM POWER (kw) 8 7 7,5 SE-325 > Ø155 TORQUE (Nm) 2 5 12 29 1 2 3 4 5 6 7 8 9 2865 16 14 127 46 18 12 1 5 R1: Power/Potencia S1 (kw) R2: Power/Potencia S1 (kw) R3: Power/Potencia S1 (kw) Torque/Par S1 (Nm)
Tool interference diagram, SE > SE 2 QCTP & 4 station turret A A 75 1 7 1
Tool interference diagram, SE > SE 25 QCTP & 4 station turret A A 1 15 15 152
Tool interference diagram, SE > SE 325 QCTP & 4 station turret A A 1 15 14 152 2 21 3 32
MODEL SE 2 SE 25 SE 325 SPECIFICATIONS MM INCH MM INCH MM INCH Control Siemens 88D Advanced / Fagor 837 TC / Fagor 855i/FL-TCv Center distance 75/1 3 /4 1/15 4 /6 1/15/2/3 4 /6 /8 /12 Center height 2 8 25 1 325 13 Swing over bed 42 16 52 2 652 26 Swing over carriage 38 15 475 18¾ 595 23 Swing over cross slide 245 9¼ 31 12¼ 56 22 Cross slide travel 185 7¼ 235 9¼ 3 11¾ Bed width 25 1 3 11 35 14 Headstock Main spindle bore 42 1 ½ 58 15 2 ¼ 4 8 15 155 3 4 6 Main spindle nose (ASA/CAM-LOCK) A2-5/D1-5 A2-6/D1-6 A2-8/D1-8 A2-8/D1-8 A2-8/D1-8 A2-11/-- Main spindle morse taper (MT) 4 4 5 Speed range (rpm) Range I 4-345 4-31 85-2 3-24 8-2 5-12 Range II 345-115 31-84 2-465 24-63 2-465 12-29 Range III 115-28 84-23 465-125 63-17 465-125 29-8 Working feed Z, X (mm/min) -5-5 -5 Z - axis ball screw ø & pitch (mm) 4/1 4/1 4/1 Specifications subject to change without notice. Not responsible for typographical error. Machines are shown with optional equipment
MODEL SE 2 SE 25 SE 325 SPECIFICATIONS MM INCH MM INCH MM INCH X - axis ball screw ø & pitch (mm) 2/5 2/5 2/5 Maxium tool Dim. 2X2 ¾ X ¾ 25X25 1 x1 25X25 1 x1 Tail stock barrel ø 58 2 ¼ 68 2½ 95 3 ¾ Tail stock barrel travel 18 7 2 7¾ 22 8 ½ Tail stock morse taper (MT) 4 4 5 Position Accuracy (mm).1.1.1 Repeatability (mm).1.1.1 Fixed Steady capacity 1-125/11-2 ½-5/5½-8 1-14/14-3 ½-5½/5½-11 1-18/18-4 ½-7 ¼/7 ¼-15½ Follow rest capacity 1-8 ½-7¼ 1-1 ½-4T 1-14 ½-5½ Main Motor Power (kw) 4 Coolant pump power (kw).37 Coolant tank capacity (l) 42/55 5.5.37 67/92 7.5.37 81/111/151/21 Length (mm) 225/25 28/33 28/3325/392/483 Overall dimensions Width (mm) 1115 Height (mm) 167 1215 179 135/165 185/214 Weight (kg) 15/13 162/178 185/22/26/32 Verification standard DIN 865 DIN 865 DIN 865 Specifications subject to change without notice. Not responsible for typographical error. Machines are shown with optional equipment
SE 2 A B C D MAXIMUM WORKPIECE WEIGHT A (mm) B (mm) C (mm) D (mm) WEIGHT Kg MAXIMUM WEIGHT BW CHUCK AND TAILSTOCK MAXIMUM WEIGHT ON CHUCK SE 2 X 75 225 1385 1115 167 SE 2 X 1 25 1385 1115 167 15 13 SE 2 X 75 28 SE 2 X 1 3 135
SE 25 A B C D MAXIMUM WORKPIECE WEIGHT A (mm) B (mm) C (mm) D (mm) WEIGHT Kg MAXIMUM WEIGHT BW CHUCK AND TAILSTOCK MAXIMUM WEIGHT ON CHUCK SE 25 X 1 28 1498 1215 179 162 SE 25 X 15 33 1498 1215 179 178 SE 25 X 1 45 SE 25 X 15 75 225
SE 325 A B C D MAXIMUM WORKPIECE WEIGHT A (mm) B (mm) C (mm) D (mm) WEIGHT Kg SE 325 X 1 28 1435 135 185 185 SE 325 X 15 3325 1435 135 185 22 SE 325 X 2 392 1435 165 214 26 SE 325 X 3 483 1435 165 214 32 MAXIMUM WEIGHT BW CHUCK AND TAILSTOCK SE 325 X 1 1125 SE 325 X 15 169 SE 325 X 2 225 SE 325 X 3 2815 MAXIMUM WEIGHT ON CHUCK 36
METALÚRGICA TORRENT, S.A. - PINACHO Partida De La Sierra s/n, 2231 Castejón Del Puente (Huesca) SPAIN +34 974 4165 / +34 974 41693 Fax : +34 974 41654 / 34 974 417733 europe@pinacholathescnc.com / info@pinacholathescnc.com www.pinacholathescnc.com