How To Program A Drill And Drill

Transcription

1 CATALOGUE Tapping Machine Rapid Drill Set-Up Robotorn

2 PNEUMATIC-ELECTRONIC-HYDRAULIC TAPPING MACHINES Comercial De Maquinaria Alzira S.L. Via A. Volta, Costa Masnaga (LC) T F Cell sez. 1-01

3 PNEUMATIC TAPPING MACHINES SERIES RN/LCN DESCRIPTION: Pneumatic motor Adjustable arm Multiposition head (see List) Air set: regulator, manometer, filter and lubricant Quick change chuck for Bilz system collets Gearbox with two speed ranges (series LCN/LCNM-RNR/RNRM) Tapping lubrication system (see List) Fixed mount Speed (rpm) Torque in Nm Chuck size Capacity TYPE FIXED HEAD RN Ø19 M2-M12 RN Ø19 M2-M10 RN Ø19 M2-M10 RN Ø19 M2-M8 LCN-12* Ø19 M2-M12 LCN-8* Ø19 M2-M8 RNR /115 31/85 2Ø31 M3-M24 RNR /170 19/67 2Ø31 M3-M20 LCN-20* 250/90 30/80 2Ø31 M3-M20 TYPE MULTIPOSITION HEAD RNM Ø19 M2-M12 RNM Ø19 M2-M10 RNM Ø19 M2-M10 RNM Ø19 M2-M8 LCNM-12* Ø19 M2-M12 LCNM-8* Ø19 M2-M8 RNRM /115 31/85 2Ø31 M3-M24 RNRM /170 19/67 2Ø31 M3-M20 LCNM-20* 250/90 30/80 2Ø31 M3-M20 * LOW COST: Economic not equipped the Tapping lubrication system Series RNR/RNRM20 Available fast motor rpm WORKING AREA: 1,800 mm AIR FLOW: 7Kg/cm 2 WORKING PRESSURE: 650 l/min A-RN-01 A-RN-02 A-RN-03 A-RN-04 A-RN-05 A-RN-06 A-RN-07 A-RN-08 A-RN-09 A-RN-10 A-RN-11 A-RN-12 A-RN-13 OPTIONAL AND SPARE PARTS Multiposition head series RN-12 Multiposition head series RNR-20 Magnetic base B1 Fixed mount C clamp mount Mechanical depth stop Steel worktable 800x600 mm series RN/RNM-12 RNR/RNRM-20 Pneumatic motor without head Pneumatic motor complete with head series RN/RNM-12 Worktable with T.Form canals of 800x600 mm Pneumatic motor complete with head series RNR/RNRM-20 Set wheels with support Shock-absorber Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 1-02

4 PNEUMATIC TAPPING MACHINES SERIES RS/LCS DESCRIPTION: Pneumatic motor Adjustable arm Fixed head Air set: regulator, manometer, filter and lubricant Quick change chuck for Bilz system collets Fixed mount Not equipped the Tapping lubrication system Speed (rpm) Working Area Torque in Nm Chuck size Capacity TYPE FIXED HEAD RS Ø19 M2-M12 RS Ø19 M2-M12 RS Ø19 M2-M12 RS Ø19 M2-M10 RS Ø19 M2-M10 RS Ø19 M2-M10 RS Ø19 M2-M10 RS Ø19 M2-M10 RS Ø19 M2-M10 RS Ø19 M2-M8 RS Ø19 M2-M8 RS Ø19 M2-M8 LCS-12* Ø19 M2-M12 LCS-8* Ø19 M2-M8 * LOW COST: Economic AIR FLOW: 7Kg/cm2 WORKING PRESSURE: 650 l/min A-RS-01 A-RS-02 A-RS-03 Magnetic base mini RS Mechanical depth stop C clamp mount OPTIONAL AND SPARE PARTS SAME SERIES RN EXCEPT OPTIONAL ADJUSTABLE HEAD Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 1-03

5 ELECTRONIC TAPPING MACHINES SERIES RER DESCRIPTION: Electronic motor single-phase type Brushless to 220V Adjustable arm Multiposition head (see List) Quick change chuck for Bilz system collets Control panel Digital readout: Programming from touch screen: down-stop-inversion automatic Tapping lubrication system Gearbox with two speed ranges Fixed mount Worktable with T.Form canals of 800x600 mm Speed (rpm) Torque in Nm Chuck size Capacity TYPE FIXED HEAD RER-24C 500/ /38 2Ø31 M3-M24 TYPE MULTIPOSITION HEAD RERM-24C 500/ /38 2Ø31 M3-M24 A-RE-01 A-RE-02 A-RE-03 A-RE-04 A-RE-05* A-RE-06 A-RE-07 * Automatic depth control OPTIONAL AND SPARE PARTS Magnetic base C clamp mount Worktable with T.Form canals of 800x600 mm Fixed lateral worktable with T.Form canals 600x360 mm Control panel: down-stop-inversion automatic Set wheels with support Shock-absorber WORKING IN AUTOMATIC Programming the depth from touch screen, the machine controls the depth and performs the following work cycle in automatic : Down Stop Inversion to the depth limit on the depth limit to extract the tap Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 1-04

6 HYDRAULIC TAPPING MACHINES SERIES RH DESCRIPTION: Worktable with T.Form canals of 800x600 mm Hydraulic unit integrated into the worktable Electric motor power 4 kw Adjustable arm Multiposition head (see List) Quick change chuck for Bilz system collets Speed regulator independent (forward and reverse) Tapping lubrication system Gearbox with two speed ranges Digital readout Fixed mount EXTRA STANDARD ACCESSORIES RHR/RHRM-60 Worktable with T.Form canals of 1000x680 mm Coolant pump and tank Speed (rpm) Torque in Nm Chuck size Capacity TYPE FIXED HEAD RH-20D Ø31 M3-M24 RHR-30D 500/ Ø31 M4-M30 RHR-45D 475/ Ø48 M4-M45 RHR-60D 275/ Ø60 M6-M60 TYPE MULTIPOSITION HEAD RHM-20D Ø31 M3-M24 RHRM-30D 500/ Ø31 M4-M30 RHRM-45D 475/ Ø48 M4-M45 RHRM-60D 275/ Ø60 M6-M60 A-RH-01 A-RH-02 A-RH.03 A-RH-04 A-RH-05 A-RH-06 A-RH-07 A-RH-08 A-RH-09 A-RH-10 A-RH-11 A-RH-12 A-RH-13* A-RH-14 * Automatic depth control OPTIONAL AND SPARE PARTS Digital readout Magnetic base B1 series RH/RHM-20 RHR/RHRM-30 Magnetic base B2 series RHR/RHRM-45D RHR/RHRM-60D C clamp mount mod. RH/RHM-20 RHR/RHRM-30 Coolant pump and tank Mechanical depth stop Magnetic positioner Worktable with T.Form canals of 1000x680 mm Fixed lateral worktable with T.Form canals 600x360 mm Fixed lateral worktable with T.Form canals 680x360 mm Set wheels with support series RHR/RHRM-30 RHR/RHRM-45D Set wheels with support series RHR/RHRM-60D Control panel: down-stop-inversion automatic Shock-absorber WORKING IN AUTOMATIC Programming the depth from touch screen, the machine controls the depth and performs the following work cycle in automatic : Down Stop Inversion to the depth limit on the depth limit to extract the tap Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 1-05

7 HYDRAULIC TAPPING MACHINES SERIES GH DESCRIPTION: Hydraulic unit integrated into the worktable Electric motor power 4 kw Adjustable arm Multiposition head (see List) Quick change chuck for Bilz system collets Speed regulator independent (forward and reverse) Tapping lubrication system Gearbox with two speed ranges Digital readout Fixed mount Speed (rpm) Torque in Nm Chuck size Capacity TYPE FIXED HEAD GH-20D Ø31 M3-M24 GHR-30D 500/ Ø31 M4-M30 GHR-45D 475/ Ø48 M4-M45 GHR-60D 275/ Ø60 M6-M60 TYPE MULTIPOSITION HEAD GHM-20D Ø31 M3-M24 GHRM-30D 500/ Ø31 M4-M30 GHRM-45D 475/ Ø48 M4-M45 GHRM-60D 275/ Ø60 M6-M60 A-GH-01 A-GH-02 A-GH-03 A-GH-04 A-GH-05 A-GH-06 OPTIONAL AND SPARE PARTS Digital readout Magnetic base B1 series GH/GHM-20 GHR/GHRM-30 Magnetic base B2 series GHR/GHRM-45D GHR/GHRM-60D C clamp mount series GH/GHM-20 GHR-30 Mechanical depth stop Shock-absorber Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 1-06

8 PNEUMATIC TAPPING MACHINE SERIES RN/RNM 12 COLLETS WITH SAFETY CLUTCH STANDARD DIN SIZE STANDARD DIN SIZE M Ø19 M grand 1Ø19 M Ø19 M grand 1Ø19 M5/6/ Ø19 M grand 1Ø19 PNEUMATIC TAPPING MACHINE SERIES RNR/RNRM 20 COLLETS WITH SAFETY CLUTCH STANDARD DIN SIZE STANDARD DIN SIZE M Ø19 M Ø31 M Ø19 M Ø31 M5/6/ Ø19 M Ø31 M Ø31 M Ø31 M Ø31 M22/ Ø31 M Ø31 Reduction 2/1 Ø31-Ø19 ELECTRONIC TAPPING MACHINE SERIES RER/RERM24 COLLETS WITH SAFETY CLUTCH STANDARD DIN SIZE STANDARD DIN SIZE M Ø19 M Ø31 M Ø19 M Ø31 M5/6/ Ø19 M Ø31 M Ø31 M Ø31 M Ø31 M22/ Ø31 M Ø31 Reduction 2/1 Ø31-Ø19 HYDRAULIC TAPPING MACHINE SERIES RH/RHM 20 COLLETS WITH SAFETY CLUTCH STANDARD DIN SIZE STANDARD DIN SIZE M Ø19 M Ø31 M Ø19 M Ø31 M5/6/ Ø19 M Ø31 M Ø31 M Ø31 M Ø31 M22/ Ø31 M Ø31 Reduction 2/1 Ø31-Ø19 Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 1-07

9 HYDRAULIC TAPPING MACHINE SERIES RHR/RHRM 30 COLLETS WITH SAFETY CLUTCH STANDARD DIN SIZE STANDARD DIN SIZE M Ø19 M Ø31 M5/6/ Ø19 M Ø31 M Ø31 M22/ Ø31 M Ø31 M Ø31 M Ø31 M Ø31 M Ø31 Reduction 2/1 Ø31-Ø19 M Ø31 HYDRAULIC TAPPING MACHINE SERIES RHR/RHRM 45D COLLETS WITH SAFETY CLUTCH STANDARD DIN SIZE STANDARD DIN SIZE M Ø19 M22/ Ø31 M5/6/ Ø19 M Ø48 M Ø31 M Ø48 M Ø31 M Ø48 M Ø31 M Ø48 M Ø31 M39/ Ø48 M Ø31 M Ø48 M Ø31 Reduction 2/1 Ø31-Ø19 M Ø31 Reduction 3/2 Ø48-Ø31 HYDRAULIC TAPPING MACHINE SERIES RHR/RHRM 60D COLLETS WITH SAFETY CLUTCH STANDARD DIN SIZE STANDARD DIN SIZE M6/ Ø31 M Ø48 M Ø31 M Ø48 M Ø31 M Ø60 M Ø31 M39/ Ø60 M Ø31 M45/ Ø60 M Ø31 M Ø60 M Ø31 M56/ Ø60 M Ø31 Reduction 3/2 Ø48-Ø31 M22/ Ø31 Reduction 4/3 Ø60-Ø48 M Ø48 Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 1-08

10 OPTIONAL MECHANICAL DEPTH STOP Series Pneumatic Series Pneumatic RS Series Hydraulic WORKTABLE 800x600mm Series Pneumatic Series Pneumatic-Electronic with T Form canals Fixed lateral worktable 600x360mm OTHER SUPPORT Magnetic Base Mini Magnetic Base B1 Magnetic Base B2 C clamp mount SET WHEELS Series Pneumatic-Electronic-Hydraulic Series Hydraulic Series Hydraulic EXTRA ACCESSORIES HYDRAULIC Coolant pump and tank Worktable with T.Form canals of 1000x680mm Control panel: down-stop-inversion automatic Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 1-09

11 SYSTEM CLAMPING QUICK LOCK Description MR-1 Clamping vertical, T Nuts, Protection plate work and Key MR1.001 Supplement 100 mm SET BOX Description CSG-2 n.2 Clamping vertical, n.2 Keys, n.2 T Nuts and n.2 Protection plate work CSG-4 n.2 Clamping vertical, n.2 Supplement 100mm, n2 Keys, n.4 T Nuts and n.2 Protection plate work SPARE PARTS Description MR MR MR T Nuts 16. T Nuts 18. T Nuts 20. MR Protection plate work MR Key Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 1-10

12 COLLETS FOR TAPPING Size WITHOUT SAFETY CLUTCH N-01 Ø 19 N-02 Ø 31 N-03 Ø 48 N-04 Ø 60 WITH SAFETY CLUTCH N-01F Ø 19 N-02F Ø 31 N-03F Ø 48 N-04F Ø 60 REDUCTION Size R-2/1 Ø 31-Ø 19 R-3/1 Ø 48-Ø 19 R-3/2 Ø 48-Ø 31 R-4/3 Ø 60-Ø 48 DRILL CHUCK ADAPTERS Size Cone AD/01 Ø 19 B-12 AD/02 Ø 31 B-16 THREADING DIE COLLETS Size PH/01 Ø 19 PH/02 Ø 31 Via A. Volta, Costa Masnaga (LC) T F Cell sez. 1-11

13 FORATRICE COORDINATA AUTOMATICA AUTOMATIC COORDINATE DRILLING MACHINE Comercial De Maquinaria Alzira S.L. Via A. Volta, Costa Masnaga (LC) T F Cell sez. 2-01

14 FORATRICE COORDINATA AUTOMATICA AUTOMATIC COORDINATE DRILLING MACHINE RAPID DRILL TRD SERIES Description Mono-block, welded steel frame with high rigidity Modular table in cast iron with four T18 slots 8,4" colour touch screen control The movement of the machine is given by linear guide-ways along all axes and driven by servo-motors (programmable) Spindle turning driven by servo-motor (programmable) Spindle BT40 with automatic clamping Electrical panel with cooling system; meets CE standards External coolant system: pump and tank Self-lubricated moving parts along all axes Automatic tool calibrator Control OMRON colour touch screen control Memory up to 999 programs Programming of coordinates through 3 different menus: a) Single hole (random pattern) b) Grid of holes (single or multiple lines) c) Flange 50 programmable zero-points 3 axes controlled (X,Y,Z) Depth (Z): Is possible to program different speed Programming sequences of work: a) Plates drilling cycle b) Profiles drilling cycle c) Thermal drilling cycle d) Tapping cycle e) Small milling cycle (linear and interpolated X/Y) f) Countersink cycle Programming sequences of work with auto run, up to 50 programmable lines Programming ISO standard External Software DrillWin 2011 or DrillCam 2013 (Opzional) Programs write and store on external PC: a) Coordinates programs X, Y b) Depth programs Z c) Programming sequences of work Read in and convert from AutoCad-Files (EPS- existence) RJ45 fast connection mounted on frame Ethernet (min. Windows XP connection cable not included) Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 2-02

15 FORATRICE COORDINATA AUTOMATICA AUTOMATIC COORDINATE DRILLING MACHINE DATASHEET TRD25CN / TRD32CN / TRD38CN / TRD42CN Capacity steel ST60 Ø 25 mm / Ø 32mm / Ø 38mm / Ø 42mm Capacity Cast iron Ø 25 mm / Ø 32mm / Ø 38mm / Ø 42mm Tapping steel ST60 M16 / M20 / M24 / M27 Tapping Cast iron M16 / M20 / M24 / M27 Spindle servomotor 8,9 kw Relation motor/axle spindle 6:5 / 2:1 / 2,5:1 / 3:1 Speeds rpm / rpm / rpm / rpm Feeds Adjustable mm/r Spindle taper BT40 Distance spindle / table (A) 260 / 660 Column travel (Z) 400 mm Lateral movement travel (X) 1500 mm 3000 mm 4500 mm 6000 mm 7500 mm 9000 mm Frontal movement travel (Y) 650 mm Table size standard (A+B) 1500x x x x x x520 Table height (D) 920 (720 mm Special beams) Max. Speed movement X 22 m/min Max. Speed movement Y 12 m/min Max. Speed movement Z 4,2 m/min Weight 3000 Kg 3750 Kg 4500 Kg 5250 Kg 6300 Kg 6750 Kg Dimension (E+F+G) 240x220x x220x x220x x220x x220x x220x220 DATASHEET TRD40CNR Capacity steel ST60 Ø 40 mm Capacity Cast iron Ø 40 mm Tapping steel ST60 M24 Tapping Cast iron M24 Spindle servomotor 4,4 kw Relation motor/axle spindle GEAR BOX WITH TWO SPEED RANGES 4 : 1 / 1 : 1 Speeds rpm / rpm Feeds Adjustable mm/r Spindle taper BT40 Distance spindle / table (A) 260 / 660 mm Column travel (Z) 400 mm Lateral movement travel (X) 1500 mm 3000 mm 4500 mm 6000 mm 7500 mm 9000 mm Frontal movement travel (Y) 650 mm Table size standard (A+B) 1500x x x x x x520 Table height (D) 920 mm (720 mm Speciale travi) Max. Speed movement X 22 m/min Max. Speed movement Y 12 m/min Max. Speed movement Z 4,2 m/min Weight 3050 Kg 3800 Kg 4550 Kg 5300 Kg 6380 Kg 6800 Kg Dimension (E+F+G) 240x220x x220x x220x x220x x220x x220x220 Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 2-03

16 FORATRICE COORDINATA AUTOMATICA AUTOMATIC COORDINATE DRILLING MACHINE External Software Drillwin 2011 External Software Drillcam 2013 OPTIONAL TRD SERIES Automatic tool changer of N.7 tools (BT40) Automatic tool changer of N.10 tools (BT40) Internal cooler system 1 bar Internal cooler system 4 bar Table 200mm lower (special beams of 700mm) Increased stroke Z axis +120 mm Control post with 12 touch screen Adjustable pneumatic vices for round tubes (Opening travel till 400 mm) Base to supplement pneumatic vice Adjustable pneumatic vice for plates (Opening travel 600 mm) Long rear jaws 750mm Automatic system to seach 0 points (Renishaw) OPTIONAL TRD SERIES Interpolated X/Y axis control module for milling Front cover with mobile sensor security Fixed sensor security Z-reader system Blocks for lifting table mm Automatic spray lubrication system Automatic paste ejector PSD250 Automatic tapping grease ejector HSC250 Adjustable mechanical vice for tubes, plates, beams (Opening travel 600 mm) 4th axis electronic dividing head DCN250 + Universal three jaw chuck 200mm + Tailstock with 175mm height F 2380 / A C D B E 1580 / / 1065 Automatic tool changer Adjustable pneumatic vice for plates /tube 4 th axis electronic dividing head Automatic tool calibrator Water Protection Screen Internal cooler system Automatic spray lubrication system Renishaw Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 2-04

17 FORATRICE COORDINATA AUTOMATICA AUTOMATIC COORDINATE DRILLING MACHINE RAPID DRILL GRD SERIES Description Mono-block, welded steel frame with high rigidity Modular table in cast iron with four T18 slots 8,4" colour touch screen control The movement of the machine is given by linear guide-ways along all axes and driven by servo-motors (programmable) Spindle turning driven by servo-motor (programmable) Spindle BT40 with automatic clamping Electrical panel with cooling system; meets CE standards External coolant system: pump and tank Chip conveyor Self-lubricating moving parts along all axes Water Protection Screen Automatic tool calibrator Control OMRON colour touch screen control Memory up to 999 programs Programming of coordinates through 3 different menus: d) Single hole (random pattern) e) Grid of holes (single or multiple lines) f) Flange 50 programmable zero-points 3 axes controlled (X,Y,Z) Depth (Z): Is possible to program different speed Programming sequences of work: g) Plates drilling cycle h) Profiles drilling cycle i) Thermal drilling cycle j) Tapping cycle k) Small milling cycle (linear and interpolated X/Y) l) Countersink cycle Programming sequences of work with auto run, up to 50 programmable lines Programming ISO standard External Software DrillWin 2011 or DrillCam 2013 (Optional) Programs write and store on external PC: d) Coordinates programs X, Y e) Depth programs Z f) Programming sequences of work Read in and convert from AutoCad-Files (EPS- existence) RJ45 fast connection mounted on frame Ethernet (min. Windows XP connection cable not included) Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 2-05

18 FORATRICE COORDINATA AUTOMATICA AUTOMATIC COORDINATE DRILLING MACHINE DATASHEET GRD32CN / GRD38CN / GRD42CN GRD42CN Capacity steel ST60 Ø 32 mm / Ø 38mm / Ø 42 Ø 42 Capacity Cast iron Ø 32 mm / Ø 38mm / Ø 42 Ø 42 Tapping steel ST60 M20 / M24 / M27 M27 Tapping Cast iron M20 / M24 / M27 M27 Spindle servomotor 8,9 Kw 8,9 Kw Relation motor/axle spindle 2:1 / 2,5:1 / 3:1 3:1 Speeds rpm / rpm / rpm rpm Feeds Adjustable mm/r Adjustable mm/r Spindle taper BT40 BT40 Distance spindle / table (A) 160 / / 660 Column travel (Z) 500 mm 500 mm Lateral movement travel (X) 3000 mm 4500 mm 6000 mm 3000 mm 4500 mm 6000 mm 3000 mm 3000 mm Frontal movement travel (Y) 1200 mm 1750 mm 2400 mm 3000 mm Table size standard (A+B) 3000x x x x x x x x3100 Table height (D) 950 mm 950 mm Max. Speed movement X 22 m/min 22 m/min Max. Speed movement Y 22 m/min 22 m/min Max. Speed movement Z 4,2 m/min 4,2 m/min Weight 3500 Kg 5000 Kg 6500 Kg 6900 Kg 8150 Kg 9000 Kg 8200 Kg 9000 Kg Dimension (E+F+G) 410x180x x180x x180x x240x x240x x240x x x490 DATASHEET GRD50CNZ GRD50CNZ Capacity steel ST60 Ø 50 mm Ø 50 mm Capacity Cast iron Ø 50 mm Ø 50 mm Tapping steel ST60 M30 M30 Tapping Cast iron M30 M30 Spindle servomotor 8,9 Kw 8,9 Kw Relation motor/axle spindle ZF GEAR BOX WITH TWO SPEED RANGES 6:1 / 3:2 Speeds rpm / rpm Feeds Adjustable mm/r Spindle taper BT40 Distance spindle / table (A) 160 / 660 Column travel (Z) 500 mm Lateral movement travel (X) 3000 mm 4500 mm 6000 mm 3000 mm 4500 mm 6000 mm 3000 mm 3000 mm Frontal movement travel (Y) 1200 mm 1750 mm 2400 mm 3000 mm Table size standard (A+B) 3000x x x x x x x x3100 Table height (D) 950 mm 950 mm Max. Speed movement X 22 m/min 22 m/min Max. Speed movement Y 22 m/min 22 m/min Max. Speed movement Z 4,2 m/min 4,2 m/min Weight 3500 Kg 5000 Kg 6500 Kg 6900 Kg 8150 Kg 9000 Kg 8200 Kg 9000 Kg Dimension (E+F+G) 410x180x x180x x180x x240x x240x x240x x x490 Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 2-06

19 FORATRICE COORDINATA AUTOMATICA AUTOMATIC COORDINATE DRILLING MACHINE External Software Drillwin 2011 External Software Drillcam 2013 OPTIONAL GRD SERIES Automatic tool changer of N. 12 tools (BT40) Automatic tool changer of N. 10 tools (BT50) Internal cooler system 4 bar Internal cooler system 7 bar Fixed sensor security Frontal and rear protection area Automatic system to seach 0 points (Renishaw) Adjustable pneumatic vice for plates (Opening travel 600 mm) Long rear jaws 750mm OPTIONAL GRD SERIES Interpolated X/Y axis control module for milling Automatic fixed tool changer for N. 7 tools (BT40) Automatic fixed tool changer for N. 7 tools (BT50) BT50 spindle Sensor mobile security Z-reader system Adjustable mechanical vice for tubes, plates, beams (Opening travel 600 mm) Control post with 12 touch screen Mobile control panel with touch screen 12 " Automatic tool changer Adjustable pneumatic vice for plates /tube Renishaw Automatic tool calibrator Water Protection Screen Internal cooler system Panel control touch screen 12 Chip conveyor Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 2-07

20 OPTIONAL FOR AUTOMATIC RAPID DRILL SERIES TRD/GRD REDUCING ADAPTORS for tool with Morse tapre shank and drawbar thread DIN-228-B ITCMA-215.C1.40BT ITCMA-215.C2.40BT ITCMA-215.C3.40BT ITCMA-215.C4.40BT REDUCING ADAPTORS for tool with Morse taper shank and drawbar thread DIN-238 ITCMA-B ITCMA-B ITCMA-B ITCMA-B ITCMA-B COLLET CHUCKS FOR DIN 6499 (ER) COLLETS WITH NORMAL NUT for tool with cilindrical shank ITCMA-ER32.70 ITCMA-ER ITCMA-ER ITCMA-ER COMBINATION SHELL MILL ADAPTORS for cutter with keyway or driving slot DIN-138 ITCMA ITCMA WELDON END MILL ADAPTORS for cutter with cylindrical shank and weldon flat DIN-1835-B ITCMA-W40.20 ITCMA-W40.25 ITCMA-W40.32 Via A. Volta, Costa Masnaga (LC) T F Cell sez. 2-08

21 OPTIONAL FOR AUTOMATIC RAPID DRILL SERIES TRD/GRD QUICK CHANGE TAPPING HEADS WITH COMPRESSION AND TENSION COMPENSATION for tap adapters without/with safety clutch SF/CF ITCMA M3-M12 ITCMA M3-M20 PULL STUD ITCMA-BT40.45 QUICK CHANGE TAP ADAPTORS WITH SAFETY CLUCTH TYPE CF for taps with shank according to DIN + ISO ITCMA-N01 ITCMA-N02 Size Ø19 M Ø31 M COLLETS DIN 6499 FORM B (ERE) for tools with cylindrical shank DIN-1835-A Size SERIES 18 PIECES ITCMA-ER32 Ø Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 2-09

22 SISTEMA SET UP - ROBOTORN Talleres Lemar S.L. Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 3-01

23 SET UP 100% DESCRIPTION: The pallet system Set Up 100% is easily adaptable to any vertical machining center, milling machine, grinding machine, 3D measuring machines or as a double station robotic welding. The installation is very simple because you can adjust its height and length, the lower part remains free for those machines where the extraction of the liquid refrigerant is done using front drawers. The pallet system Set Up 100% can be used not only for the production of medium and large quantities but also for small lots. It drastically reduces the time required to exchange parts with a consequent reduction of production costs. The pallet system Set Up 100% has a competitive price, ultrarapid repayment. Thanks to its robust, compact design, it is easy to move from one machine to another. S.770UP S.1000UP S.1500UP Size 770x400x118 mm 1000x600x118 mm 1500x500x118 mm S.01UP S.02UP Optional Plate with 3 canals Plate with grating Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 3-02

24 ROBOTORN DESCRIPTION: Robotorn is the one and only Robot adaptable to all models and brands of CNC Lathes and any automatic manipulation. Strong and Robust, moving on 5 axes with the possibility to load and unload two items in a single operation. Loads up to 30 kg / 66,1 lbs. Robotorn easy and intuitive, equipped with an ergonomic and light touch screen, and does not require programming. Integrates in a single set, the robotic arms, wrist, controllers, electronics, security elements and safety protection. Programming the working cycle is so easy and fast and doesn't need a knowledge of CNC. Can be used for small, medium and large lots. Its small size allow it to occupy a small area and is very easy to move inside the workshop. Robotorn is suitable not only to big companies but medium and small too. Datasheet Axis Working area Speed Power Base /sg 1000W Arm /sg 1000W Forearm /sg 510W Wrist /sg 510W Auxiliar /sg 510W Max. Load 30 Kg / 66,1 Ibs Optional R/001 Double collets Via A. Volta, Costa Masnaga (LC) T F Cell info@cma-italia.it sez. 3-03

25 Via A. Volta, Costa Masnaga (LC) T F Cell