Circular Signal Connectors CIRCON M2 circular signal connectors are designed to DIN specification N698 and have a standard M2 threaded connection housing. They are offered in coupler, connector, and panel mount configurations that satisfy simple cable-to-cable and cable-to-machine requirements. They are ideal for control signal transmission and servo drive encoder feedback applications in the plastics, printing, analytical instrument, robotic, and machine tool industries, and any other industrial or commercial application where a compact, rugged connector is required. 800-77-59 www.lappusa.com www.lappcanada.com www.lappmexico.com
Technical Specifications quipment Description PIC CIRCON M2 Connectors are available in housing arrangements that can accommodate different insert keying positions. Inserts are offered in 7 contact configurations for mounting male or female, crimp or solder contacts. Common to all arrangements are a rugged nickel plated zinc body, plastic contact insulation body and sleeve, and gold plated electrical contacts. Cable mounted arrangements also include an integral MC shield ring and cable clamp and seal. The figure to the right shows the general construction of these connectors. The connectors are offered with insert configurations for 6, 7, 8+, 9, 2, 6, and 7 crimp or solder contacts in either a clockwise or counter-clockwise orientation. Used in combination, they connect one cable with another (cable coupler) or a cable to fixed wiring in a control enclosure or on a machine, instrument, or servo motor. Features & Benefits The new M2 connectors have many inherent features which offer application advantages and provide significant benefits for the customer. These features make it one of the most application friendly connectors available, and insure quick and easy assembly, high reliability, and long, uninterrupted service life in tough industrial environments. 5Key features include: Rugged Nickel-plated, die-cast Zinc Body Positive vibration protection for use with motor drives and moving assemblies Integral MC cable gland provides strain-relief, IP67/IP68 protection, and 60 degree shielding Identification marking field and unique color marking clips provide positive identification and visual differentiation in multiple connector installations. Color-coded keying rings insure correct mating selection in applications where several connectors are mounted in the same location. Marking Ring Cap Nut MC Shield Ring Insert with Panel Mount Base with Vibration Protection Ring & Panel Seal Insert with Technical Specifications Lamellar Cable Clamp & Seal Insulation Sleeve Connector Body & Coupling Nut Coding Blue= +20 degrees Red= -20 degrees Black= 0 degrees # of : 6, 7, 8+, 9, 2, 6, 7 Rated Voltage: 6,7,8+,9 poles - 50 volts 2 & 6 poles - volts 7 poles - 50 volts Rated Current: 6 & 7 pole: amps; 8+, 9, 2, 6, 7 pole: 7 amps Impulse Voltage: 0.8 kv Contact Resistance: <5m Ohms Mating Cycles: minimum Temperature Range: -25 C to +25 C Protection Class: IP67/68 (0h/m) Wire Gauge: Crimp mm : 0.-.0mm2 (2-8 AWG) 2mm :.0-2.5mm2 (8- AWG) Solder mm : up to mm2 (8 AWG) 2mm : up to 2.5mm2 ( AWG) Cable Diameter: 7.0 to.5 mm Materials: Housing: Nickel Plated Zinc Insert: PA, PBT, UL9 V-0 : gold plated copper alloy Gaskets & Seals: FPM Standards: DIN N 698 Approvals:
Insert Configurations & Insert Configurations Connector inserts will accept both male and female contacts. A complete connection requires one -Type insert and one P-Type insert -Type Insert 7.002766 7.002768 7.002770 7.00275 7.002756 7.002758 7.00272 7.0027 7.00276 7.00270 7.00272 7.0027 7.00278 7.002720 7.002722 7.002706 7.002708 7.00270 7.008500 7.028500 7.08500 (Clockwise numbered contacts viewed from the mating side) Use 2mm Use 2mm Use & 2mm 5 6 2 5 6 7 2 8 7 6 5 9 2 Use mm Use mm Use mm Use mm 9 2 8 7 6 5 # of 6 7 8+ 9 2 6 7 P-Type Insert (Counter- Clockwise numbered contacts viewed from the mating side) Use 2mm Use 2mm Use & 2mm 7.002760 7.002762 7.00276 7.00278 7.002750 7.002752 7.00276 7.00278 7.00270 Use mm Use mm Use mm Use mm 7.00272 7.002726 7.002728 7.00272 7.0027 7.00276 7.002700 7.002702 7.00270 7.008000 7.028000 7.08000 Part Number 72.00000 72.02000 72.02600 7.200600 7.0500 72.0600 72.0000 72.00 72.0000 Description M2 Gold Male Crimp mm Contact: 0. -.0 mm 2 (26-8 AWG) M2 Gold Male Solder Contact: up to.0 mm 2 (8 AWG) M2 Gold Female Solder Contact: up to.0 mm 2 (8 AWG) M2 Gold Female Crimp Contact: 0. -.0 mm 2 (26-8 AWG) M2/LS HYP Gold Female Crimp Contact D6: 0. -.0 mm 2 (26-8 AWG) M2 Gold Female Crimp 2 mm Contact:.0-2.5 mm 2 (8 - AWG) M2 Gold Female Solder Contact 2mm up to 2.5 mm 2 ( AWG) M2 Gold Male Crimp 2mm Contact:.0-2.5 mm 2 (8 - AWG) M2 Gold Male Solder 2 mm Contact: up to 2.5 mm 2 ( AWG) Pack Size
Housing Configurations Housing Configurations Panel mount base, cable connector, and cable coupler housings are provided with color-coded keying rings to insure correct mating selection in multiple connector applications. STRAIGHT PANL MOUNT BAS (STYL A) Keying "N" Keying "-20" Keying "+20" 72.00000 72.00 72.00200 CABL CONNCTOR (STYL D6) Keying "N" Keying "-20" Keying "+20".2007.2006.2008 Keying "N" Keying "-20" Keying "+20" CABL COUPLR (STYL F6).2000.2009.200 (All dimensions above are in mm)
Tools & Accessories Crimp Tool 0. - 6.0 mm 2.80 Locator.800 Removal Tool Panel Base Insert 75.00550 Metal Screw Cap Style A: 75.080 Style F6, F7: 75.0800 Plastic Protection Cap Style D6: 75.00770 Style A, F6, F7: 75.00780 Yellow Marking.20098 Red Marking.20 Blue Marking.20096 Green Marking.20099 Transparent Marking.20097
Cable Applications The CIRCON M2 connectors are ideal for use with industrial control and data cables, and servo feedback cables. Based on the specific application, a wide variety of cable/connector combinations is possible. The tables below provide a sampling of the possibilities. Application Industrial quipment Control and Signal Servo Feedback (Siemens) Stationary/Flexible Applications Use With Connector Contact Configuration 6 & 7 Pole 8+, 9, 2, 6, & 7 Pole OLFLX 90/90 CY OLFLX 90P/90 CP UNITRONIC 90/90 CY/90 CY TP OLFLX 590P/590 CP SPIRX 00P/50 P OLFLX TC 600 UNITRONIC 00/00CY OLFLX Tray II OLFLX Servo LK-SMS-FX5 002572 - x2x(22) + x(20) 0025725 - x2x(26) + x(26) + x2x(20) 0025726 - x2x(26) + x(26) + x2x(20) + x(2) Application Industrial quipment Control and Signal Servo Feedback (Siemens) Servo Feedback (Indramat) Continuous Flex Applications Use With Connector Contact Configuration 6 & 7 Pole 8+, 9, 2, 6, & 7 Pole OLFLX -FD 890/890 CY UNTRONIC -FD 890 OLFLX -FD 89/89 CY UNTRONIC -FD P Plus OLFLX -FD 890 P/890 CP UNTRONIC -FD CP Plus OLFLX -FD 89 P/89 CP UNTRONIC -FD CP (TP) Plus OLFLX Servo LK-SMS-FX8 00277 - x2x(22) + x(20) 00277 - x2x(26) + x(26) + x2x(20) 00277 - x2x(26) + x(26) + x2x(20) + x(2) OLFLX Servo LK-INX 707200 - x2x(2) + 2x(8) 70720 - x2x(2) + 2x(20) 707202-9x(20) The products and specifications set forth in this brochure are subject to change without notice and LAPP USA, Inc. disclaims any and all liability for such variations. LAPP USA, Inc. further disclaims any and all liability for typographical, printing, or production errors or changes affecting the products and/or the specifications. M2Flyer 8/06