Speed Controller with One-touch Fitting Stainless Steel Series Elbow Type/Universal Type Series -FG RoHS Stainless specifications for use in corrosive environments. Stainless steel used for metal parts. Suitable for use on CRT lines where copper ions can cause damage, for washing food processing equipment where there is exposure to water and salt water, etc., and in clean rooms where dust from discoloration and rusting of copper materials is unacceptable. Light colors to match equipment White resin parts are used for bodies and release buttons. Threads with and without seal are available as standard. Applicable tubing: Inch sizes standardized Inch sizes are now available for all models. Elbow type 1FG-M5 1FG-1 1FG- 1FG- 1FG- 1FG- 1FG-U/ 1FG-N1 1FG-N 1FG-N 1FG-N 1FG-N 1FG-N 1/ Note 1) Meter-out and meter-in types can be visually differentiated by the flow direction symbol on the resin body. Note ) Elbow type only Specifications Universal type 1FG-M5 1FG-1 1FG- 1FG- 1FG- 1FG- Port size M5 x. R 1/ R 1/ R 1/ R / R 1/ 1FG-U/ - UNF 1FG-N1 1/ 1FG-N 1/ 1FG-N 1/ 1FG-N / Applicable tubing O.D. Metric size Inch size. 1/" 5/" /1" 1/" 5/1" /" 1/" Elbow type Fluid Air Proof pressure 1.5 MPa Max. operating pressure 1 MPa Min. operating pressure.1 MPa Ambient and fluid temperature 5 to C (No freezing) Applicable tubing material Nylon, Soft nylon, Polyurethane Note) Use caution regarding the max. operating pressure when soft nylon or polyurethane tubing is used. (Refer to pages 11 and for details.) Flow Rate and Sonic Conductance Universal type 5 Made to Order (Refer to page 5 for details.) Symbol Flow Direction Symbols on Body Meter-out type Meter-in type Indication symbol Symbol 1FG 1FG- 1 1FG- 1FG 1FG 1FG 1FG- 1 1FG- 1FG 1FG ø. ø. ø ø ø ø ø ø ø ø ø Metric size ø ø ø ø ø Tubing ø ø O.D. ø1/" ø1/" ø/1" ø5/" ø/1" ø1/" ø1/" ø5/1" ø/" ø/" ø1/" ø5/" ø5/" ø1/" ø5/1" Inch size ø/1" ø5/1" ø/" ø1/" Controlled flow Free flow Flow rate (L/min (ANR)) Sonic conductance dm /(s bar)..5.. 9 1.1 Critical Controlled flow..5. pressure ratio Free flow... Note) Flow rate values are measured at.5 MPa and C. 1. 1. 9..5. 9...5..
1 M5 standard 1/, 1/ standard / standard 1/ standard Nil N Body size Type Elbow Universal Thread type Metric thread (M5) Unified thread (- UNF) R 1FG 1FG Speed Controller with One-touch Fitting Stainless Steel Series Elbow Type/Universal Type 1 F G 1 Control type Meter-out 1 Meter-in With One-touch fitting Stainless steel specifications (SUS) M5 U/ 1 1FG- 1 1FG- 1 Port size M5 x. - UNF 1/ 1/ / 1/ Made to Order (Refer to the below for details.) Option Nil None S With seal M5 and U/ are not available with seal. Applicable tubing O.D. Note) Metric size Inch size ø. ø ø ø ø ø 1 5 9 11 ø1/" ø5/" ø/1" ø1/" ø5/1" ø/" ø1/" Note) For applicable tubing O.D. selection, refer to the on page 5. Use ø1/" tube. 1 Lubricant: Vaseline X Grease-free (Seal: Fluorine Coated) + Throttle Valve (Without Check Valve) Ex.) 1FG-M5--X Ex.) 1FG-M5--X1 Throttle Valve (Without Check Valve) X1 Ex.) 1FG-M5--X1 Note) Throttle valve is only compatible with the part no. of the meter-out type. Needle Valve/Flow Characteristics How to Order Made to Order Series -FG 1FG- 1FG- Lock nut option Nil Hexagon lock nut J Round lock nut X1 Note 1) Not particle-free Note ) Throttle valve is only compatible with the part no. of the meter-out type. Note) The flow characteristics are representative values. TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q 5,,,, 9, 1,,,, 9,, 11 5,, 1FG 1FG, 11,, 9, 1FG 1FG,, 11 5
Series -FG Construction: Elbow Type Meter-out type M5 type U/ type 1FG- Meter-in type M5 type U/ type 11FG- No. Description Material Note 1 5 9 11 1 Body A Handle Body B Needle Needle guide Seat ring Lock nut U seal Cassette Seal Gasket H, Stainless steel M5 type only Caution Be sure to read before handling. Refer to front matter 5 for Safety Instructions and pages to 1 for Flow Control Equipment Precautions. 5
Speed Controller with One-touch Fitting Stainless Steel Series Elbow Type/Universal Type Series -FG Construction: Universal Type Meter-out type M5 type U/ type 1FG- Meter-in type M5 type U/ type Component Parts No. Description Material Note 1 5 9 11 1 1 1 Body A Elbow body Handle Body B Needle Needle guide Seat ring Lock nut U seal Cassette Seal Spacer Gasket H, Stainless steel M5 type only 11FG- TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q 55
Series -FG Dimensions: Elbow Type (Hexagon width across flats) M5 type U/ type (Hexagon width across flats) Metric Size d T H D1 D L1 L L (1) A () L M1 Max. Min. Max. Min. (g) 1FG-M5-. M5 x.. 9...1.. 5. 5.. 1FG-M5-9...1.. 1FG-M5- M5 x. 11. 9.. 5. 5 1.1.9 11...5 1FG-1-. R 1/ 9. 1...5 1..1 1.1.1.1. 1 1FG-1-9...5. 1FG-1-11...5..5 1FG-1- R 1/ 1.. 5.. 5...1.1 1.5 19 1FG-1-1.5.1 9. 1.1 1 1 1FG--. 5.. 1 1FG--. 5... 1FG-- R 1/ 1.5... 9.9.9. 9. 1.5 1FG-- 1.5 5..5 1. 1 1FG--.. 9. 1FG--. 9.5 1 1.5 1FG-- R 1/ 19 1.5 1..... 1.. 1 1FG--.9.. 9 1FG--.. 9. 55 1FG--. 9.5 1 1.5 5 1FG-- R / 19 1.5 19. 5... 5. 1.. 1 59 1FG--.9.. 1 1FG-- 1.5..9 1 1FG-- R 1/..5 5. 9. 9..1.9 5. 9.5 1 Note 1) Reference dimensions Note ) Reference dimensions of M5 x., R threads after installation. Inch Size d T 1FG-U/-1 1/" 1FG-U/- 5/" 1FG-U/-5 /1" 1FG-U/- 1/" 1FG-N1-1 1/" 1FG-N1-5/" 1FG-N1-5 /1" 1FG-N1-1/" 1FG-N1-9 5/1" 1FG-N- 5/" 1FG-N-5 /1" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N-11 /" 1FG-N- 1/" - UNF 1/ 1/ 1/ / 1/ H D1 D L1 L L (1) A () L M1 Max. Min. Max. Min. (g)...1.. 9. 11. 9. 1..1. 5. 5. 1.5 11. 1..1.5 1 9...5... 11. 1..1. 5...1.1 1.5..9 1 19. 5.. 1.1 1.5 1. 5.. 1 11..9.. 1.5.5. 1.5 5..5 9.9.9. 9.... 1. 1.5.9 5..5 1. 1.. 9. 19. 9.5 1 1..... 1.5.9 1.. 1.. 9. 55 19. 9.5 1 19. 5... 5. 1.5 5.9 1.. 1 59.9..9 1...5 5. 9. 9..1 1. 5. 9.5 1 Note 1) Reference dimensions Note ) Reference dimensions of - UNF and threads after installation. 5
Speed Controller with One-touch Fitting Stainless Steel Series Elbow Type/Universal Type Series -FG Dimensions: Universal Type Metric Size M5 type U/ type d T L5 (1) A () H D1 D D L1 L L L M1 Max. Min. Max. Min. (g) 1FG-M5-.. 19. 1FG-M5- M5 x..5... 9. 9. 9... 5.. 1FG-M5-11. 1.. 1..5 1FG-1-... 9..1.5.9. 1FG-1-1FG-1-9. R 1/ 1. 11..9 1.9 5...1.1.9.9..5 1 1FG-1-1FG--...9 1..9...9 1.. 1.9 9. 1.5 1 1 1FG--. 1. 5..1 1FG-- R 1/ 1.5 9.9.9. 9...9 1. 5.. 5.1 1.5 1FG-- 1FG-- 1.5... 1.9.5 5..5.9. 1 1FG--. 9.. 9.5 1.5 1FG-- R 1/ 19 1.5...... 5.9 1 1. 1FG--.9.9. 55. 9 1FG--..5 5. 5 5.9. 1FG--. 9.. 1.5 59 1FG-- R / 19 1.5 5.... 5. 5 1 1. 1FG-- 1FG--.9 1.5.9. 5. 1. 5. 9.. 5.1 1 5 1FG-- R 1/. 5. 9. 9..1 1. 19.. 5.. 5 Note 1) Reference dimensions Note ) Reference dimensions of M5 x., R threads after installation. Inch Size (Hexagon width across flats) (Hexagon width across flats) d T 1FG-U/-1 1/" 1FG-U/- 5/" 1FG-U/-5 /1" 1FG-U/- 1/" 1FG-N1-1 1/" 1FG-N1-5/" 1FG-N1-5 /1" 1FG-N1-1/" 1FG-N1-9 5/1" 1FG-N- 5/" 1FG-N-5 /1" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N- 1/" 1FG-N-9 5/1" 1FG-N-11 /" 1FG-N-11 /" 1FG-N- 1/" - UNF 1/ 1/ 1/ / 1/ L5 (1) A () H D1 D D L1 L L L M1 Max. Min. Max. Min. (g). 19..5.. 9.. 9. 9... 5. 5. 11. 1...5 1.5 1.. 1.9... 9..1.5. 9..9.9 1. 11. 1.9 1..9 5...1.1 1.5. 9.9 5.. 1.5 19.9 1...9.. 1 1.. 1.9 9. 1.9 1. 11. 1.1.9.1.5. 19. 5. 5.1 9.9.9. 9. 1.5 1...9 5...9 9 1.9.. 1.5.. 5..9.9. 19. 9.. 9.5.... 1.5.9 1... 5.9 1 9.. 5. 5 5.9. 19. 9.. 5... 5. 1.5 59.9 1... 5. 1 5.9 1. 5. 9.. 5. 1. 9 5. 9. 9..1 1. 19.. 5. 5.1 Note 1) Reference dimensions Note ) Reference dimensions of - UNF and threads after installation. TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q 5
Speed Controller with One-touch Fitting Stainless Steel Series In-line Type Series -FG 1FG 1FG 51FG 1FG 1FG Applicable tubing O.D. Metric size Inch size. 1/" 5/" /1" 1/" 5/1" /" 1/" Specifications Fluid Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Applicable tubing material Air 1.5 MPa 1 MPa.1 MPa 5 to C (No freezing) Nylon, Soft nylon, Polyurethane Note) Use caution regarding the max. operating pressure when soft nylon or polyurethane tubing is used. (Refer to pages 11 and for details.) Flow Rate and Sonic Conductance 1FG 1FG 51FG 1FG 1FG Flow Direction Symbols on Body Indication symbol Symbol Tubing O.D. Controlled flow Free flow ø. Metric size ø ø ø1/" Inch size ø5/" ø/1" Flow rate (L/min (ANR)) Sonic conductance dm /(s bar).... 1. Critical Controlled flow... pressure ratio Free flow.5.5.5 Note) Flow rate values are measured at.5 MPa and C. ø ø ø ø ø ø ø ø ø ø ø5/" ø/1" ø/1" ø1/" ø1/" ø5/1" ø/" ø/" ø1/" ø1/" ø5/1" 9 1. 1...5 9. 5.9..5 9.9 Made to Order (Refer to page 59 for details.) 5
1FG Speed Controller with One-touch Fitting Stainless Steel Series In-line Type 5 Body size M5 standard 1/ standard 1/ standard / standard 1/ standard Stainless steel specifications () Lubricant: Vaseline Ex.) 1FG--X With One-touch fittings Throttle Valve (Without Check Valve) Ex.) 1FG--X1 Needle Valve/Flow Characteristics 1FG How to Order 1 F G Made to Order X X1 Note) The flow characteristics are representative values. 51FG Series -FG Lock nut option Nil Hexagon lock nut J Round lock nut Made to Order (Refer to the below for details.) Applicable tubing O.D. Metric size Inch size ø. 1 ø1/" ø ø5/" ø 5 ø/1" ø ø1/" ø 9 ø5/1" ø 11 ø/" Use ø1/" tube. ø1/" Grease-free (Seal: Fluorine Coated) + Throttle Valve (Without Check Valve) Ex.) 1FG--X1 Note) Not particle-free X1 TMH D -FE KE -FG -FP -FM -D -T P N AQ V AK VCHC S R Q 1FG 1FG 59
Series -FG Construction Component Parts No. Description Material Note 1 5 9 11 Body A Handle Body B Needle Needle guide Lock nut U seal Spacer Cassette Seal H Dimensions Metric Size 1FG- 1FG- 1FG- 1FG- 1FG- 51FG- 51FG- 1FG- 1FG- 1FG- 1FG- 1FG- 1FG- d. D1 D L1 L. 9. 11. 9. 11..... 1.5.9 1.5.9 Note 1) Reference dimensions.5..5.. 9.... 5. 59. 59. 1...1.5 5.. 5....1.. 9. 11 11. L (1) Max. Min..5.. 1. 5...... 5...... 9.1.1. 5. 1.. 51.1. 5.1. M1..5..5 1 1 1 1 (g) 5 5 9 Inch Size 1FG-1 1FG- 1FG-5 1FG- 1FG- 1FG-5 1FG- 51FG-5 51FG- 51FG-9 1FG- 1FG-9 1FG-11 1FG-11 1FG- d 1/" 5/" /1" 1/" 5/" /1" 1/" /1" 1/" 5/1" 1/" 5/1" /" /" 1/" D1 D L1 L. 9. 11. 9. 11.. 11......9.9 1. Note 1) Reference dimensions.5..5.. 9.... 5 5. 5. 5. 59. 59...9.1 L (1) Max. Min..5.5. 5.. 1.. 5.. 5...1..1.1.. 9.5. 11....5. 5.5.. 9.1. 51 5... 9.5 9..5...1 5..5.9 M1. 1.5.. 1.5 1.5 1 1 1 1 (g) 9 1 1 5 5 9 55
Information Akihabara UDX F, -1-1, Sotokanda, Chiyoda-ku, Tokyo 1-1, JAPAN URL http://www.smcworld.com SMC Corporation All Rights Reserved -E5 Issued: June, D-DNP P- (DN) Stainless Steel Speed Controller (Elbow Type) Series G Material: Stainless steel 1 Sealant: Special FKM Seat ring: Applicable tubing materials FEP PFA Nylon Soft nylon Polyurethane Polyolefin Flow Rate and Effective Area G F-M5 G F-1 G F- G5 F- G F- Tubing O.D. (mm) ø, ø ø ø, ø ø ø, ø ø ø, ø ø Controlled Flow rate (l/min (ANR)) 9 9 9 (free) flow Effective area (mm ) 1.5..5 1 Note) Flow rate is measured at.5 MPa and C. Elbow type G F-M5 G F-1 G F- G5 F- G F- Port size M5 x. R1/ R1/ R/ R1/ Applicable tubing O.D. (mm) Applicable cylinder bore size (mm),, 1,, 5,, 5,,, 5,,, JIS Symbol Meter-out type Meter-in type Specifications Fluid Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Applicable tubing material Air 1.5 MPa 1 MPa.1 MPa 5 to C (No freezing) turns ( turns Note 1) ) FEP, PFA, Nylon, Soft nylon, Polyurethane Note ), Polyolefin Note 1) In case of G F-M5 Note ) Please be cautious of the max. operating pressure when soft nylon or polyurethane tubing is used. Note ) When polyurethane tubing is used, please use an inner sleeve. How to Order Conforms to Food Sanitation Laws (Material of the component parts meets the apparatus and container packaging standards.) Speed controller G F 1 S Body material G Stainless steel Body size M5 1/ 1/ 5 / 1/ Type Elbow Control type Meter-out 1 Meter-in With one-touch fitting With seal In the case of M5, seal is inapplicable to the product. Applicable tubing O.D. ø ø ø ø ø Port size M5 M5 x. 1 R1/ R1/ R/ R1/ 1
Series G Needle Valve: Flow Characteristics GF-M5 G1F-M5 GF-1 G1F-1 GF- G1F- Flow rate (l/min (ANR)) 5 1.5 1..5 Effective area (mm ) Flow rate (l/min (ANR)), 1 Effective area (mm ) Flow rate (l/min (ANR)), Effective area (mm ). 5 (turns) 5 (turns) 5 (turns) G5F- G51F- GF- G1F- Flow rate (l/min (ANR)) 5, 5 Effective area (mm ) Flow rate (l/min (ANR)) 5 5 5 Effective area (mm ) 5 (turns) 5 (turns)
Stainless Steel Speed Controller Series G Construction Elbow type Meter-out Meter-in y y u u q w e r t i q w e r t i o o!!!1!1!!!!!!!5!5 M5 port M5 port y y u u q w e r t! o q w e r t! o!!!1!1 i i!!!!!!!! Component Parts No. Description Material No. Description Material 1 5 9 Release button Guide Chuck Seal Body A Handle Lock nut Needle Body B Stainless steel 1 Stainless steel 1 Stainless steel 1 Special FKM Stainless steel 1 Stainless steel 1 Stainless steel 1 Stainless steel 1 Stainless steel 1 11 1 1 Ring U-seal Seat ring Gasket Needle guide Special FKM Special FKM Special FKM Stainless steel 1 FKM Stainless steel 1, Special FKM Stainless steel 1
Series G Dimensions G F-M5 H (Width across flats) L ød M L1 T L G F-1 G F- G5 F- G F- L L5 ød L A L5 L A L H (Width across flats) M L1 T L L G F-M5- G F-M5- G F-1-S G F-1-S G F-1-S G F--S G F--S G F--S G5 F--S G5 F--S G5 F--S G F--S Applicable tubing O.D. ød T M5 x. 1/ 1/ / 1/ H 19 D.. 1 1.. L1.. 5..5. 9. 1.9 1.1. 5.. L... 5.5.. 1. 1... 5.5 L L 11. 1 1. 1. 1.9.9 19 1. 1. 1. 5. L5. 1...5 L Max. Min... 9 5.5.5 5. 5. 5.9 5. A Note) Max. Min... 5.5.5 5.. 5.. M 1. 1. 1. 1..9 1..9.9.. (g) 5.. 9.. 5... 9. 1..9. 1. Note) Reference thread dimensions after installation.