Aerial General Description of UCMSV COMPLIED WITH VDI-BA UCMSV8- Y, 8, 110, 16, 200, 0, 0 and 400 mount widths are available. Y Available angles are from 0 to 7 in r increments of. Y Gas spring can be removed from the cam whilst in the die/press. Y UCMSV is complied with VDI-BA specification. UCMSV/8/110 Structure and Assembly / Disassembly r UCMSV8 w w Structure of Cam Slider and Positive Return Follower UCMSV n110 UCMSV 16n400 e e 0.01n0.03 0.01n0.03 UDisassembly method of UCMSV / 8 / 110 1) Remove hexagon socket head bolt () and stopper plate (w). 2) Remove cam slider (e) from cam holder (r) at rear of cam. 1487 U between cam holder and cam slider is. U between cam slider and cam driver is 0.01n0.03. UAssembly method of UCMSV / 8 / 110 1) Assemble components in the reverse order to which they were removed. YMake sure that there is no foreign matter on the slide surfaces before assembly. YThe clearance between the cam slider and the cam holder is carefully controlled. Check that the serial number stamped on both parts is the same. YPlease ensure that all bolts removed are re-installed and tightened. 1488
Aerial General Description of UCMSV COMPLIED WITH VDI-BA UCMSV16/200/0/0/400 Structure and Assembly / Disassembly t e w r UDisassembly method of UCMSV 16 / 200 / 0 / 0 / 400 1) Remove safety plate (). 2) Remove hexagon socket head bolt(w) and stopper plate(e). 3) Remove cam slider (r) from cam holder (t) at rear of cam. UAssembly method of UCMSV 16 / 200 / 0 / 0 / 400 1) Assemble components in the reverse order to which they were removed. YMake sure that there is no foreign matter on the slide surfaces before assembly. YThe clearance between the cam slider and the cam holder is carefully controlled. Check that the serial number stamped on both parts is the same. YPlease ensure that all bolts removed are re-installed and tightened. 1489 1490
Aerial UCMSV400 (00 n) Ha0.0 4-h22-h32 180a0.0 37a0. 400a0.1 200a0.0 0 t i@3 @6i @7i A 4 G a0.0 Ja0.02 @0!9!8!6!!4 i!7 @1 27a0.02 6a0.0 F E 30 1 ui $2 @2@!0oiy!2!1 400(W) @4i!3io!0!1!2 Travel A B C E F G H J 00 38.6 39.00 237.00 18 88.00 287.00 116 0 42.6 387.1 232.1 1 94.19 280.81 127 10 394.13 249.13 14 106.86 268.14 133 1 0.9 39.82 2.82 13 118.01 6.99 143 20.3 397.08 297.08 100 131.9 243.41 10 404.71 319.71 8 138.6 23 16 6.1 408.22 343.22 6 146.89 228.11 179 3 70.8 404.2 34.2 0 19.17 21.83 190 40 77.1 400.46 3.46 40 167. 207.70 20 4 84. 394.84 374.84 20 179.24 19.76 216 Working Force kn Catalog No. (W) 40 UCMSV 400 00 0 10 1 20 3 40 4 Spring Type PS GS G GD NGP Catalog No. (W) PS UCMSV 400 G 390 340 400 30 Mark Without gas spring but accessories for installation of each type are included. Ca0.1 a0.0 B 17 10a0.02 #9#8#7 4-h22-h32 $0#0 Spring Specification (Qty 3) Spring Type PS Spring Force N F A F E F AP Gas Spring Catalog No. GS 00n4 200 3640 32963 SFC.70.80 (SANYO) G 00n4 22200 3700 323 X70-080-TD (ALLER) NOTE FA :Initial Force FE :Final Force FAP :Force at working point 30a0.1 0a0.02 210 17 6a0.0 11a0.0 17a0.0 @8i GD 00n4 219 34080 3100 U.0800.080 (DADCO) Option Code LA NF without accelerator with key without nitrogen gas Specification UCMSV400 ー ー G ー NF YParts list is shown in p.13 Y Detail of key is shown in p.12 YCam diagram is shown in p.11 Y NF : Gas Springs are not filled with nitrogen gas if delivery is by air freight. 147 2a0.0 148
Aerial UCMSV400 (n7 ) 400a0.1 200a0.0 180a0.0 0 a0.0 3a0.02 410a0.0 4-h22-h32 27a0.02 6a0.0 30 Travel A B C E F G S 0 3 391.3 2 196.04 178.96 199 104.6 392.76 40.76 o13 221.83 13.17 194 120.0 3 423.3 o 249.61 1.39 187 6 94.6 387.48 43.48 o48 266.49 108.1 190 40 70 73.1 378.6 443.6 o6 281.99 93.01 194 7 96.6 364.72 449.72 o8 296.88 78.12 198 Working Force kn Catalog No. (W) 40 UCMSV 400 0 6 70 7 Spring Type PS GS G GD NGP Mark Without gas spring but accessories for installation of each type are included. t @3i @6i A @7i iu @@2 $2 @4i Catalog No. (W) PS UCMSV 400 G 37a0. 4 G S @0!9!8 Ca0.1!6!!4 i!7 30a0.1 0a0.02 a0.0 #9#8#7 B 17 10a0.02 4-h22-h32 210 17a0.0 @1 F E 1 $0#0 @8i!0oiy!2!1 400(W)!0oi!3!2!1 Spring Specification (Qty 3) Spring Type PS GS G GD Option 0n Code NF Spring Force N F A F E F AP with key without nitrogen gas Specification UCMSV400 ー ー G ー NF Gas Spring Catalog No. 32963 SFC.70.80 (SANYO) 6 200 3640 3137 SFC.70.63 (SANYO) 70Y7 2947 SFC.70.0 (SANYO) 0n 3700 323 X70-080-TD (ALLER) 6 22200 81 X70-063-TD (ALLER) 3400 70Y7 28800 X70-00-TD (ALLER) 0n 3100 U.0800.080 (DADCO) 6 219 34080 296 U.0800.063 (DADCO) 70Y7 28020 U.0800.00 (DADCO) NOTE FA :Initial Force FE :Final Force FAP :Force at working point YParts list is shown in p.13 Y Detail of key is shown in p.12 YCam diagram is shown in p.11 Y NF : Gas Springs are not filled with nitrogen gas if delivery is by air freight. 6a0.0 11a0.0 2a0.0 149 10
Aerial UCMSV400 Cam Diagram 00 0 10 6 70 40 40 38.6 1 20 7.3 3 40 ey Specification 2 6.1 70.8 6.1 77.1 o0.01 o0.03 0 9 14 h9 h14 (with M8p1 bolt) 4 0 84. 6 46 46.1 120 42.6 0.9 47.6 71. 103.9 94.6 6 104.6 8.7 8.8 73.1 70 68.7 38.6 7.3 48.9 0.7 96.6 6.1 3.1 70.8 6.1 77.1 84. 6 46 46.1 120 42.6 0.9 47.6 71. 103.9 94.6 6 8.7 8.8 73.1 70 68.7 48.9 0.7 96.6 7 3.1 104.6 11 12
UCMSV400 Aerial Table of Components km00 n7 No. Description Qty Material and Remark Cam Driver 1 GGG t Cam Holder 1 GGG y Base Plate R 1 S4C u Slide Plate(VSM-1) 2 Bronze with Graphite i Hexagon Socket Head Bolt 28 SCM43 M8p20 o ey 2 SS400!0 ey 4 SS400!1 Hexagon Socket Head Bolt 4 SCM43 M6p20!2 Hexagon Socket Head Bolt 4 SCM43 M16p4!3 Base Plate L 1 S4C!4 Stopper Plate 1 S4C! Stopper 4 Urethane(PCU20)!6 Hexagon Socket Head Bolt 2 SCM43 M8p!7 Safty Plate 2 S4C!8 Lock Block 1 SS400!9 Hexagonal Bolt 1 SCM43 M16p10 @0 Hexagonal Nut 1 SCM43 M16 @1 Cam Slider 1 GGG @2 Spring Guide 1 S4C @3 Gas Spring Guide Plate 1 S4C @4 Slide Plate(VSM-14) 2 Bronze with Graphite @ Hexagon Socket Head Bolt 6 SCM43 M20p0 @6 Slide Plate(VSM-31) 2 Bronze with Graphite @7 Slide Plate(VSM-34) 2 Bronze with Graphite @8 Slide Plate(VSM-) 4 Bronze with Graphite #0 Positive Return Plate 2 S4C #7 Cam Slide Guide(Lower) 1 S4C #8 Hexagon Socket Head Bolt 4 SCM43 M12p4 #9 Dowel Pin with Female Thread 2 SUJ2 h16-0 $0 Hexagon Socket Head Bolt 2 SCM43 M10p3 $1 Hexagon Socket Head Bolt 2 SCM43 M8p40 $2 Gas Spring 3 $3 ey 8 SS400 $4 Hexagon Socket Head Bolt 8 SCM43 M8p 13 14