Assembling an AR-15 Parts CheckList:

Save this PDF as:
Size: px
Start display at page:

Download "Assembling an AR-15 Parts CheckList:"

Transcription

1 Assembling an AR-5 Parts CheckList: Table of Contents Upper Receiver Common Parts... A, A2 & A3 sights BARREL COMPONENTS BOLT & BOLT CARRIER COMPONENTS... 6 LOWER RECEIVER COMMON PARTS Buttstock components repair & assembly tools accessories

2 Assembling an AR-5 Parts CheckList: Upper Receiver Common Parts CONTACT/PROJECT: DATE: PAGE of. Select () of the following UPPER RECEIVER options: Complete Upper Receiver with Barrel, or Complete Upper Receiver without Barrel (Order barrel separately), or Stripped Upper Receiver (Order barrel separately). 2. If ordering a STRIPPED UPPER RECEIVER, then order either 2A, 2B, or 2C: 2A) Order () of the following COMPLETE UPPER RECEIVER PARTS KITS, or Complete Upper Receiver Parts Kit 2B) Order ( each) of the following COMPLETE SUBASSEMBLIES, or Ejection Port Cover Kit Forward Assist Kit Charging Handle Kit 2C) Order ( each) of the following individual parts. Ejection Port Cover Ejection Port Cover Spring Ejection Port Cover Pin Ejection Hinge Pin Snap Ring Forward Assist Button Pawl Pin Forward Assist Pawl Detent Forward Assist Pawl Detent Spring Forward Assist Pawl Forward Assist Spring Forward Assist Retainer Pin Charging Handle Charging Handle Latch Charging Handle Spring Charging Handle Spring Pin

3 Assembling an AR-5 Parts Check List: A, A2 & A3 sights CONTACT/PROJECT: DATE: PAGE of. If Ordering an A REAR SIGHT, then order either A or B: A) Order () of the following A REAR SIGHT KITS, or Complete A Sight Kit B) Order ( each) of the following individual parts. Sight Windage Drum Base Spring Pin Sight Detent Sight Detent Spring Rear Flat Sight Spring Sight Aperture Sight Windage Screw C) If an A Front Sight is desired, Order () of the following COMPLETE A FRONT SIGHTS: A Front Sight Post w/5 detents and round post 2. If Ordering an A2 REAR SIGHT, then order either 2A or 2B and 2C: 2A) Order () of the following COMPLETE A2 SIGHT KITS, or Complete A2 Sight Kit 2B) Order ( each) of the following individual parts and 2C. Windage Knob Windage Pin Sight Base Windage Screw Rear Sight Spring Rear Sight Base Spring Pin Elevation Knob Elevation Wheel Elevation Spring 2 Index Screw

4 Assembling an AR-5 Parts CheckList: A, A2 & A3 sights CONTINUED A, A2, & A3 Sights Continued 2C) Order (3 each) of the following individual parts. Index Springs 3 Sight Balls 3 2D) If an A2 Front Sight is desired, order () of the following COMPLETE A2 FRONT SIGHTS: A2 Front Sight Post w/4 detents and square post 3. If ordering sights for a flattop receiver: 3A) Order from the following SIGHT options: Optics Spare Batteries Rings Flattop Riser Mount Carry Handle with Rear Sight Lens Covers Detachable Rear Sight 3B) If a Front Sight is desired, order () of the following FRONT SIGHTS: Part Product Name & Description Stock Number Qty Price Ordered Received Front Sight

5 Assembling an AR-5 Parts CheckList: BARREL COMPONENTS CONTACT/PROJECT: DATE: PAGE of. Select () of the following BARREL options: Barrel with Mil-Spec front sight housing installed Barrel without Mil-Spec front sight housing installed 2. If a free float handguard is desired: Choose ( each) of the following components: Free Float Handguard Gas Tube of proper length Gas Block if not supplied with barrel Gas Tube Roll Pin Front Sight optional Sling Swivel optional Flash Hider or Compensator if not supplied with barrel Lock Washer, Peel Washer, Locknut, or Crush Washer if required 3. If a 2-piece handguard is desired, order either 3A or 3B and 3C. 3A) Order ( each) of the COMPLETE DELTA RING ASSEMBLY, or Delta Ring Assembly, Complete 3B) Order ( each) of the following individual DELTA RING components and 3C. Barrel Nut Slip Ring Spring Assembly Handguard Slip Ring Handguard Retainer Ring 3C) Choose ( each or as otherwise indicated) of the following components: Handguard Cap if not supplied with barrel 2-Piece Handguard Gas Tube of proper length

6 Assembling an AR-5 Parts CheckList: BARREL COMPONENTS continued Gas Tube Pin Choose ( each or as otherwise indicated) of the following components: Gas Block or Front Sight Housing if not supplied with barrel Taper Pins if installing a Front Sight Housing (Order 2) 2 Forward Sling Swivel Forward Sling Swivel Pin Flash Hider or Compensator if not supplied with barrel and barrel is threaded Lock Washer, Peel Washer, Locknut, or Crush Washer if required

7 Assembling an AR-5 Parts CheckList: BOLT & BOLT CARRIER COMPONENTS CONTACT/PROJECT: DATE: PAGE of. If ordering a BOLT & CARRIER, order either A or B or C A) Order () of the following Preassembled Bolt/Carrier GroUP, or Preassembled Bolt/Carrier Group B) Order (each) of the following individual components, or C. Bolt Assembly Carrier Assembly C) Order ( each unless otherwise indicated) of the following individual components. Bolt, Stripped Ejector Ejector Spring Ejector Roll Pin Extractor Extractor Pin Extractor Spring Extractor Buffer, Black Gas Ring (Order 3) or -Piece Gas Ring 3 Bolt Carrier, Stripped Bolt Carrier Cam Pin Bolt Carrier Key Bolt Carrier Key Screws (Order 2) 2 Firing Pin Firing Pin Retainer Pin

8 Assembling an AR-5 Parts CheckList: LOWER RECEIVER COMMON PARTS CONTACT/PROJECT: DATE: PAGE of. Select one () of the following LOWER RECEIVER options: Complete Lower Receiver with Buttstock Complete Lower Receiver without Buttstock Don t forget the buttstock Stripped Lower Receiver 2. If ordering a STRIPPED LOWER RECEIVER, then order either 2A, 2B, or 2C: 2A) Order () of the following COMPLETE LOWER RECEIVER PARTS KITS, or Complete Lower Receiver Parts Kit 2B) Order ( each) of the following COMPLETE SUBASSEMBLIES, or Trigger Kit of correct pin size,.54 or.7 Bolt Catch Kit Magazine Catch Kit Pistol Grip Kit Pivot Pin Kit of correct pin size,.250 or.32 Take Down Pin Kit Fire Control (Safety) Selector Kit Triggerguard Kit Buffer Retainer Buffer Retainer Spring 2C) Order ( each unless otherwise indicated) of the following individual parts. Hammer/Trigger Pin of correct size,.54 or.7 (Order 2) 2 Trigger Trigger Spring Disconnector Disconnector Spring Hammer With J Hook Spring Bolt Catch Spring Bolt Catch Plunger Bolt Catch 7

9 Assembling an AR-5 Parts CheckList: LOWER RECEIVER COMMON parts CONTINUED 2C Continued) Order ( each unless otherwise indicated) of the following individual parts. Bolt Catch Pin Magazine Catch Magazine Release Button Spring Magazine Catch Button Pistol Grip Pistol Grip Lock Washer Pistol Grip Screw Pin Detents (Order 2) 2 Pin Detent Springs (Order 2) 2 Pivot Pin of correct size,.54 or.7 Take Down Pin Fire Control Selector Fire Control Spring Fire Control Detent Triggerguard Triggerguard Pivot Pin Triggerguard Pin Triggerguard Spring Triggerguard Plunger Buffer Retainer Buffer Retainer Spring

10 Assembling an AR-5 Parts CheckList: Buttstock components CONTACT/PROJECT: DATE: PAGE of. If a COLLAPISBLE BUTTSTOCK is desired, order either A or B: A) Order () of the following COMPLETE COLLAPSIBLE BUTTSTOCK KITS, or Collapsible Buttstock Kit, Complete B) Order (each) of the following COLLAPSIBLE BUTTSTOCK individual components: Collapsible Buttstock, Only Buffer Assembly of correct type for stock and caliber Lower Receiver Extension Tube of correct length and diameter Action Spring of the correct length for stock type Receiver End Plate Receiver Extension Nut Action Spring of the correct length for stock type Receiver End Plate Receiver Extension Nut C) These parts are typically preassembled on the Collapsible Buttstock, but be sure they are included when ordering. Release Lever Lock Pin Nut Lock Pin Retainer Roll Pin Lock Release Lever Pin Spring Lock Release Lever Pin Sling Swivel (Not required for CAR-5 Stocks) Sling Swivel Screw (Not required for CAR-5 Stocks)

11 Assembling an AR-5 Parts CheckList: Buttstock components continued 2. If a FIXED BUTTSTOCK is desired, order either 2A or 2B: 2A) Order () of the following COMPLETE FIXED BUTTSTOCK KITS, or Fixed Buttstock Kit, Complete 2B) Order (each) of the following FIXED BUTTSTOCK individual components: Fixed Buttstock only Buffer Assembly of correct type for stock and caliber Lower Receiver Extension Tube of correct length and diameter Action Spring of the correct length for stock type Buttstock Spacer For A2 stocks only 2C) These parts are typically preassembled on the Fixed Buttstock, but be sure they are included when ordering. Buttstock Screw (A- or A-2) Butt Stock Door Butt Stock Door Hinge Door Hinge Pin Butt Stock Door Plunger Butt Stock Door Plunger Retainer Pin Butt Stock Door Plunger Spring Sling Swivel Sling Swivel Screw

12 Assembling an AR-5 Parts CheckList: repair & assembly tools CONTACT/PROJECT: DATE: PAGE of Common Tools for Repair & Assembly Ballpeen Hammer 4 to 8 oz Nylon/Brass Hammer Bit Driver Screwdriver with 3 ½ shaft Torx Bit Set Hex Bit Set Flat Head bits & Philips Bits Needle Nose Pliers Lower Receiver Vise Block Upper Receiver Vise Block Set Rifle Bench Block Bench Mat Bench Vise Padded Vise Jaws Set of Roll Pin Holders in Number,2, 3, & 4 Set of Roll Pin Punches in Number,2, 3, & 4 Barrel Nut Tool or Combination Armorer s Wrench Buttstock Tool (Collapsible Stock only) Handguard Removal Tool Barrel Specific Tools ½ drive Torque Wrench (30 ft lbs to 50 ft lbs) 3/32 taper starter punch /8 flat punch to peen the swivel rivet Staking punch to start the peen on the swivel rivet Sight Adjustment Tool for your type of sight (A-/A-2)

13 Assembling an AR-5 Parts CheckList: REPAIR & ASSEMBLY tools ConTinued Barrel Specific Tools continued Gas Tube Alignment Pin Snap Ring Pliers Breaker Bar Strap Wrench Upper Receiver Specific Tools Headspace Gauge Set Field/Go/ No-go Rear Sight Elevation Spring Tool for assembling the A2 sight Sight Adjustment Tool for your type of sight Ejector Removal Tool Lower Receiver Specific Tools.5 diameter punch for locating trigger parts & installation Pivot Pin Detent Installation Tool Bolt Catch Pin Punch AR-5 Hammer Trigger Jig Hammer Trigger Drop Block for adjusting the hammer & trigger

14 Assembling an AR-5 Parts CheckList: accessories Select from the following accessories: Optics Primary Optics Secondary Spare Batteries for Optics Clamp-On Sights Sling Bipod Weapon Light Remote Switch for Weapon Light Spare Batteries for Weapon Light Vertical Grip Magazines Cleaning Kit Solvent Oil Patches Chamber Brush Bore Brush Accu-Wedge

Table of Contents: Safety Rules... 1. Safety Selector... 1. Loading the Magazine... 2. Loading Magazine into Rifle... 2. Chambering a Round...

Table of Contents: Safety Rules... 1. Safety Selector... 1. Loading the Magazine... 2. Loading Magazine into Rifle... 2. Chambering a Round... OWNERS MANUAL Table of Contents: Safety Rules... 1 Safety Selector... 1 Loading the Magazine... 2 Loading Magazine into Rifle... 2 Chambering a Round... 3 Chambering a Round (with Carrier in Battery)...

More information

Figure 2. 1. Place selector lever on SAFE. If rifle is not cocked, selector lever cannot be pointed toward safe.

Figure 2. 1. Place selector lever on SAFE. If rifle is not cocked, selector lever cannot be pointed toward safe. UNLOADING Figure 2 1. Place selector lever on SAFE. If rifle is not cocked, selector lever cannot be pointed toward safe. 2. Point rifle in a SAFE DIRECTION!! 3. Remove magazine by pressing magazine catch

More information

Feinwerkbau Target Rifles

Feinwerkbau Target Rifles FWB 2700 Universal The system of this series of FWB 2700 Universal small bore rifles is available in a stock of warp-free white laminated wood. The stock is formed ergonomically and available as real right-

More information

Semi-automatic rifle Match Rifle MR223 A1 Calibre.223 Rem.

Semi-automatic rifle Match Rifle MR223 A1 Calibre.223 Rem. EN Semi-automatic rifle Match Rifle MR223 A1 Calibre.223 Rem. Operator s Manual Semi-automatic rifle Match Rifle MR223 A1 Calibre.223 Rem. Risk of death from gunshot wounds! Accidental discharge of weapon

More information

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories

11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 2 of 19 Accessories 84453 Kit - Piston tool 69191 Kit - Pressure test adaptor

More information

Tools Spares Guide. The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts.

Tools Spares Guide. The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts. Tools Spares Guide Tools Spares Guide The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts. Throughout the guide you will find:- Exploded

More information

P22 Cal..22L.R. Operating Instructions. Semi-Automatic pistol USA. anl_us~1.qxd 13.08.2002 07:52 Seite 1. extractor

P22 Cal..22L.R. Operating Instructions. Semi-Automatic pistol USA. anl_us~1.qxd 13.08.2002 07:52 Seite 1. extractor anl_us~1.qxd 13.08.2002 07:52 Seite 1 manual safety extractor stabilizer frontsight slide Loaded chamber indicator rear sight hammer barrel trigger lock muzzle trigger mounting rail manual safety slide

More information

SIG 556 Match Sear/Hammer Installation

SIG 556 Match Sear/Hammer Installation SIG 556 Match Sear/Hammer Installation ShootingSight LLC 2012 Safety Warning Always verify your firearm is unloaded before working on it. These instructions are meant as a supplemental guide to an armorer

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 1 of 20 Carburetor Assembly www.ktoutdoor.com 13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 2 of 20 Carburetor Assembly 214763-02

More information

Feinwerkbau Air Rifles

Feinwerkbau Air Rifles FWB Model 700 Alu The precision design of the Model 700 system combined with the various possibilities of adjustment offer to the shooter the best results. The high-quality finish of the complete rifle

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27A PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 1 of 16 Accessories www.ktoutdoor.com 12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 2 of 16 Accessories

More information

RAIL ADAPTER SYSTEM DRAFT TC-23-AIMSS CHAPTER 1 1-1 DESCRIPTION

RAIL ADAPTER SYSTEM DRAFT TC-23-AIMSS CHAPTER 1 1-1 DESCRIPTION DRAFT TC-23-AIMSS CHAPTER 1 RAIL ADAPTER SYSTEM 1-1 DESCRIPTION The Rail Adapter System (RAS) consists of a set of lightweight specially modified sections that replace the standard front handguards on

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 11-600016C MAC 110 01/77 to 02/83 IPL 95807-R2 Page 1 of 16 Tools & Accessories www.ktoutdoor.com 11-600016C MAC 110 01/77 to 02/83 IPL 95807-R2 Page 2 of 16 Tools & Accessories 95169 Kit - Spark Arrester

More information

100% Made in Taiwan www.guay2.com Manufactured by G&G ARMAMENT

100% Made in Taiwan www.guay2.com Manufactured by G&G ARMAMENT 100% Made in Taiwan www.guay2.com Manufactured by G&G ARMAMENT Address Taipei / 11F-3,NO.27,Lane 169,Kangning St,Shijr City,Taipei County 22180,TAIWAN Changhua / 999, Zhonghua Rd., Shengang Township, Changhua

More information

An Easy AR-15 Trigger Job by: Dave Kaiser

An Easy AR-15 Trigger Job by: Dave Kaiser An Easy AR-15 Trigger Job by: Dave Kaiser Factory Colt Fire Control Parts JP Enterprises, Inc., has been one of our leading suppliers of AR-15 rifle accessories and one of the first suppliers that made

More information

WARNING: HK 416 Self loading Rifle/Pistol Cal..22L.R. HV USA MADE BY CARL WALTHER. Magazine Release. Charging Handle. Cover. Magazine.

WARNING: HK 416 Self loading Rifle/Pistol Cal..22L.R. HV USA MADE BY CARL WALTHER. Magazine Release. Charging Handle. Cover. Magazine. HK 416 Self loading Rifle/Pistol Cal..22L.R. HV Charging Handle Magazine Release Ejection Port Cover Rail System USA Magazine Trigger Guard Front Sight Rail System Upper Receiver Rear Sight Rear Receiver

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056

More information

POWER LOCK KIT GENERAL INSTALLATION -J04427 REV. 2007-12-04. Kit Number. Models. Additional Parts Required. Kit Contents

POWER LOCK KIT GENERAL INSTALLATION -J04427 REV. 2007-12-04. Kit Number. Models. Additional Parts Required. Kit Contents -J0 REV. 00--0 POWER LOCK KIT GENERAL Kit Number -0, 0-0 Models For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harleydavidson.com (English

More information

AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST

AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST AUTOMOTIVE SERVICE TECHNOLOGY BASIC TOOL LIST All automotive students are required to provide their own hand tool set. The following list of tools will serve as a guide for Automotive Service Technology

More information

CHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.

CHIPPING HAMMERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A. CHIPG HAMMERS Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1056 Rev A CHIPG HAMMERS TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. On 650 Series tools, tighten the handle

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 1 of 20 Accessories & Tools www.ktoutdoor.com 11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 2 of 20 Accessories

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 11-600097F MINI-MAC 35AS 07/76 to 04/77 IPL 92754A-R1 Page 1 of 12 Accessories www.ktoutdoor.com 11-600097F MINI-MAC 35AS 07/76 to 04/77 IPL 92754A-R1 Page 2 of 12 Accessories 91753 Case - Carrying 88756

More information

MODEL T200-F18 MODEL T125-F18 Finish Nailers

MODEL T200-F18 MODEL T125-F18 Finish Nailers P MODEL T200-F18 MODEL T125-F18 Finish Nailers IMPORTANT! DO NOT DESTROY It is the customer s responsibility to have all operators and service personnel read and understand this manual. OPERATING MANUAL

More information

STIHL Precision Series Hand Tools

STIHL Precision Series Hand Tools STIHL Precision Series Hand Tools Spare Parts List A PH 80 Hedge Shear M PP 900/700 Pole Pruner Head Assembly B PL 0 Lopper N PP 900 Pole Pruner Head Parts C PL 0 Lopper O PS 0 Pruning Saw D PL 0 Lopper

More information

M1A/M14 5/8-24 thread adapter Installation Instructions

M1A/M14 5/8-24 thread adapter Installation Instructions - 1 - M1A/M14 5/8-24 thread adapter Installation Instructions Table of contents Table of contents... 1 About the operators manual... 2 Adapter description... 3 Kit contents... 3 Technical specifications...

More information

SA vz. 61 SKORPION. pistol instruction manual

SA vz. 61 SKORPION. pistol instruction manual SA vz. 61 SKORPION pistol instruction manual 1. Description of Sa vz. 61 pistol 1.1. General 1.1.1...Purpose and features of Sa vz. 61 pistol 1.1.2...Characteristics of Sa vz. 61 pistol 1.2 Description

More information

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F

More information

COMMERCIAL GAS DRYER

COMMERCIAL GAS DRYER COMMERCIAL GAS DRYER MODELS CGM2751TQ0 (WHITE) CGM2751TQ1 (WHITE) 5 12 Litho in U.S.A. (CMS) (psw) c 2012 WHIRLPOOL CORPORATION Part No. W10119631 Rev. C TOP AND CONSOLE PARTS W10119631 2 TOP AND CONSOLE

More information

INSTRUCTION MANUAL CZ 511

INSTRUCTION MANUAL CZ 511 INSTRUCTION MANUAL CZ 511 Before handling the firearm read this manual carefully and observe the following safety instructions. Improper and careless handling of the firearm could result in unintentional

More information

CHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR

CHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR CHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR Sterling Midi Junior is a transportable rear wheel drive, three or four wheel electric powered Scoota with pneumatic tyres, upolstered seat

More information

FX TYPHOON 12. Table of Contents

FX TYPHOON 12. Table of Contents Owner s Manual FX TYPHOON 12 Table of Contents Table of Contents Warranty Specifications General Instructions Operating Instructions Loading the Magazine Trigger Adjustments Care & Maintenance Recommended

More information

2510/2550 Dust Control Burnisher

2510/2550 Dust Control Burnisher 250/2550 Dust Control Burnisher Operator and Parts Manual TENNANT COMPANY Commercial Products 2875 RANSOM STREET HOLLAND MI 49424 U.S.A. FAX: 800 678 4240 CUSTOMER SERVICE: 800-982 7658 607597 Rev. 0 (2-00)

More information

Ceta Form Tool Containers & Assortments

Ceta Form Tool Containers & Assortments Ceta Form Tool Containers & Assortments Smart service solutions A50IM-79 79 Piece Industrial Maintenance Kit 2 C-Plus Phillips screwdrivers, PH1x80; PH2x100 mm F14 15 Upgrade Kits upgrade the basic kit

More information

TOOL SCHEMATIC AND PARTS MODEL 3150/38 W16R STAPLER

TOOL SCHEMATIC AND PARTS MODEL 3150/38 W16R STAPLER P MODEL 3150/38 W16R STAPLER IMPORTANT! DO NOT DESTROY Always refer to safety and maintenance manual #403606 for detailed information on this tool. It is the customer's responsibility to have all operators

More information

NuStep TRS 4000 Parts List 1.6

NuStep TRS 4000 Parts List 1.6 NuStep TRS 4000 Parts List 1.6 Note: Most parts are available individually, but to simplify installation, ASSEMBLIES (in CAPS) only come fully assembled. Items noted as (not shown) were replaced with current

More information

K&T Saw Shop 606-678-9623 or 606-561-4983. 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories

K&T Saw Shop 606-678-9623 or 606-561-4983. 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 2 of 11 Accessories 68899 Piston Assy - 0.005 in. oversize 66790 Ring Set - Piston 0.005

More information

Range Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual

Range Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work

More information

CHAPTER 5 PARTS. This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation.

CHAPTER 5 PARTS. This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation. CHAPTER 5 PARTS PARTS BY PICTORIAL This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation. NOTE: The following is a breakdown description of the

More information

9,000lb capacity 4 Post Lift Installation Manual

9,000lb capacity 4 Post Lift Installation Manual 9,000lb capacity 4 Post Lift Installation Manual Parts Checklist 1 Main side track with 9/16 hole on cylinder end complete with cylinder, hose and connector 1 Offside track 2 Cross Rails pre-assembled

More information

OPERATIONS MANUAL 20 SST FLUTED BULL BARREL.300 REM SAUM 16 HEAVY BARREL.308 WIN 18 BULL BARREL.308 WIN PANTHER.22LR PANTHER LR-308T

OPERATIONS MANUAL 20 SST FLUTED BULL BARREL.300 REM SAUM 16 HEAVY BARREL.308 WIN 18 BULL BARREL.308 WIN PANTHER.22LR PANTHER LR-308T Made in the USA. OPERATIONS MANUAL PANTHER LR-308 24 SST BULL BARREL.308 WIN PANTHER LR-300 20 SST FLUTED BULL BARREL.300 REM SAUM PANTHER LR-308B 18 BULL BARREL.308 WIN PANTHER LR-308T 16 HEAVY BARREL.308

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

TIBERIUS ARMS TECHNICAL MANUAL

TIBERIUS ARMS TECHNICAL MANUAL MAGAZINE & HOPPER-FED PAINTBALL RIFLE TIBERIUS ARMS TECHNICAL MANUAL TECHNICAL MANUAL MAGAZINE & HOPPER-FED. CAL PAINTBALL RIFLE PATENTS PENDING TABLE OF CONTENTS Warnings... WARNING: This is not a toy.

More information

If you do not understand any of the material in this manual or have any questions, contact a qualified gunsmith or Maverick directly.

If you do not understand any of the material in this manual or have any questions, contact a qualified gunsmith or Maverick directly. OWNER S MANUAL FOR 88 TM AND 91 TM MODEL PUMP ACTION SHOTGUNS IMPORTANT SAFETY WARNINGS - NOTE THE SYMBOL These safety warnings are for your protection as well as the safety of others. Disregarding information

More information

Gripper Kit for the Boe-Bot Robot (#28202)

Gripper Kit for the Boe-Bot Robot (#28202) 599 Menlo Drive, Suite 100 Rocklin, California 95765, USA Office: (916) 624-8333 Fax: (916) 624-8003 General: info@parallax.com Technical: support@parallax.com Web Site: www.parallax.com Educational: www.stampsinclass.com

More information

758 Heavy-duty Ratchet Guy Wire Cutter

758 Heavy-duty Ratchet Guy Wire Cutter INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product

More information

INTRODUCING THE OFFICIAL TACTICAL RIMFIRE .22 LONG RIFLE. is a licensed trademark of Heckler & Koch, Inc.

INTRODUCING THE OFFICIAL TACTICAL RIMFIRE .22 LONG RIFLE. is a licensed trademark of Heckler & Koch, Inc. INTRODUCING THE OFFICIAL TACTICAL RIMFIRE.22 LONG RIFLE HK416 D10 RS HK416 PISTOL HK MP5 A4 HK MP5 A5 HK MP5 SD6 Made by Germany is a licensed trademark of Heckler & Koch, Inc. NTRODUCING CARL WALTHER

More information

TC 170 & TC 170 PD TRANSFER CASE

TC 170 & TC 170 PD TRANSFER CASE Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS

More information

46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis

46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression

More information

DYNA RIDER FOOTBOARD KIT

DYNA RIDER FOOTBOARD KIT -J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English

More information

CAM-03, Camshaft Assembly Oil Seal Replacement

CAM-03, Camshaft Assembly Oil Seal Replacement CAM-03, Camshaft Assembly Oil Seal Replacement Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Flywheel Lock (P9206) Balance Shaft Pin Spanner

More information

K-39/K-39B. Drain Cleaning Machine. Ridge Tool Company/Elyria, Ohio, U.S.A.

K-39/K-39B. Drain Cleaning Machine. Ridge Tool Company/Elyria, Ohio, U.S.A. K-/K-B A- AUTOFEED Cable Chuck Pan Head Screw # - () Chuck Adapter Nose Piece Spiral Ring () Hand Grip Sleeve Clamp Springs () Spacer Clips () Gasket Drum Front Drum Liner Screw # - x () Drum Back Power

More information

Micro Cart User's Guide

Micro Cart User's Guide Micro Cart User's Guide To take full advantage of the ergonomic features of your new Sun Mountain Micro Cart, please read the following information. SUN MOUNTAIN 1 Your Micro Cart has several innovative

More information

THE RANGE... supplied by S P O R T

THE RANGE... supplied by S P O R T THE RANGE... supplied by S P O R T Underlever Spring Powered Air Rifles HW97K Weihrauch s legendary spring powered Field Target rifle. Underlever action. A scope only Karbine air rifle. Fixed barrel precision,

More information

CODIGO MODELO DESCRIPCION (EN) www.airguns.cl SCOT-01. Combined Clip SCOT-02A. 25.4mm QQ Clip SCOT-02B. 30mm QQ Clip SCOT-03

CODIGO MODELO DESCRIPCION (EN) www.airguns.cl SCOT-01. Combined Clip SCOT-02A. 25.4mm QQ Clip SCOT-02B. 30mm QQ Clip SCOT-03 SCOT-01 Combined Clip 25.4mm Weaver Mount Detachable, Connect Laser & Flashlight with Gun Pipe SCOT-02A 25.4mm QQ Clip Both 25.4mm Dia, Side Picatinny Rail, Can Connect Laser / Flashlight with Scope SCOT-02B

More information

DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)

DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX

More information

HOME GYM. Model. Retain This Manual for Reference OWNER'S MANUAL. www.hyper-extension.com

HOME GYM. Model. Retain This Manual for Reference OWNER'S MANUAL. www.hyper-extension.com NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice www.hyper-extension.com HOME GYM 50036 Hardware Identifier Assembly Instruction Parts List Warranty

More information

Tools for Switch Machines, Switch Layout Hardware and Related Equipment

Tools for Switch Machines, Switch Layout Hardware and Related Equipment Switch Machines and Associated Ansaldo STS USA Tools for Switch Machines, Switch Layout Hardware and Related ASTS USA offers a complete line of generic and special-purpose tools to expedite repairs and

More information

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997 Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47

More information

TIPPMANN. A-5 Owner s Manual CO2 POWERED PAINTBALL MARKER

TIPPMANN. A-5 Owner s Manual CO2 POWERED PAINTBALL MARKER TIPPMANN PNEUMATICS, INC. Get Your ur Heart t Pound unding With h A Tippmann! WARNING: This paintball marker/gun is not a toy nor is it intended for unsupervised use by persons under the age of 18 years.

More information

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47) 47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing

More information

WIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928

WIRE ROPE CUTTERS. Designed for new and unused wire rope. Since 1928 WIRE ROPE CUTTERS Designed for new and unused wire rope Since 1928 IMPACT 101 104 106 108 103 105 107 109 Model 1 (light duty): Model 1 3 /4 capacity 101 Cutter complete 8 lbs. 102 Casting base 4 lbs.

More information

TECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS

TECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS TECHNICAL GUIDE For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS EXPLODED VIEW & PARTS LIST TROUBLESHOOTING ORDERING INFORMATION

More information

M14 Item Stock Numbers

M14 Item Stock Numbers M14 Item Stock Numbers by Lee Emerson 06/24/07 This document is derived from the 06/24/07 draft of the Third Edition of M14 Rifle History and Development by Lee Emerson copyright 2007. Most of the historical

More information

INSTRUCTION MANUAL CZ 452 ZKM

INSTRUCTION MANUAL CZ 452 ZKM INSTRUCTION MANUAL CZ 452 ZKM Before handling the firearm read this manual carefully and observe the following safety instructions. Improper and careless handling of the firearm could result in unintentional

More information

SC351. Model: SC351 NIL. Part List US-English

SC351. Model: SC351 NIL. Part List US-English Model: NIL Part List US-English Table of Contents GENERAL VIEW 3 COVER AND TANKS 5 FRAME SYST 7 HANDLE SUPPORT SYST 9 HANDLE SYST 12 MOTOR AND DECK SYST 15 BRUSH DECK SYST 17 ACCESSORIES 19 WIRING DIAGRAM

More information

GLOCK INSTRUCTION FOR USE

GLOCK INSTRUCTION FOR USE GLOCK INSTRUCTION FOR USE for the Safe Action self-loading pistol TAKE NOTE: Always assume that the GLOCK pistol or any other firearm is loaded is capable of being discharged until you the user, have been

More information

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines

World Bridge Replacement Parts for EMD 567 and 645 Diesel Engines 40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3

More information

FLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B

FLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B Model: Part List US-English Table of Contents General view 3 Rotomolded assembly 5 Chassis assembly 7 Drive assembly 9 Steering assembly 11 Control pedals assembly 13 Waste container assembly 15 Filter

More information

BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)

BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)

More information

K&T Saw Shop 606-678-9623 or 606-561-4983

K&T Saw Shop 606-678-9623 or 606-561-4983 16-400048-21 TITAN PB250 06/94 to Current IPL 211569 Page 1 of 13 Accessories www.ktoutdoor.com 16-400048-21 TITAN PB250 06/94 to Current IPL 211569 Page 2 of 13 Accessories 1 219179 1 Nozzle, Round 2

More information

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431

More information

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46) 46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel

More information

Table of contents 1 US 06.01

Table of contents 1 US 06.01 Please read and understand this owner s manual before taking your new SIGARMS pistol out of the box. It is vital to your safety and to the safety of others that you accurately follow the information contained

More information

Rebuild Instructions for 70001 and 70010 Transmission

Rebuild Instructions for 70001 and 70010 Transmission Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before

More information

FANG 24T, 26T and 28T -EU

FANG 24T, 26T and 28T -EU Model: FANG 24T FANG 26T FANG 28T Lista Części Polish Spis Treści Solution tank 3 Recovery tank 5 Brush lift - Drive 7 Brush - Pad Drive 9 Solution Control 11 Brush skirt 13 Control housing 15 Squeegee

More information

Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing

Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed Gearshift cable/lever installing Gearshift housing repairing Gearshift lever repairing lever/relay lever, installing Gearshift mechanism

More information

0WKM070002 KENWOOD "EU" KM070 KENWOOD COOKING CHEF *901.400. 901400 ev ol 2012/06

0WKM070002 KENWOOD EU KM070 KENWOOD COOKING CHEF *901.400. 901400 ev ol 2012/06 *901.400 KENWOOD COOKING CHEF 1 2 3 4 5 6 63 43 44 45 46 29 13 40 42 7 8 39 9 38 11 37 49 50 47 10 53 14 15 16 54 17 21 18 19 36 35 34 55 56 57 22 20 23 33 28 62 60 58 27 26 59 61 25 24 76 108 107 103

More information

Lathe Milling Attachment

Lathe Milling Attachment Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,

More information

OWNER S MANUAL Table Tennis Table Patent Pending

OWNER S MANUAL Table Tennis Table Patent Pending OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8179

More information

OPERATING INSTRUCTIONS FOR

OPERATING INSTRUCTIONS FOR OPERATING INSTRUCTIONS FOR MEDECO KEY MACHINES FOR MEDECO ORIGINAL, BIAXIAL, MEDECO 3, KEYMARK CLASSIC & KEYMARK X4 PRODUCTS MEDECO HIGH SECURITY LOCKS ASSUMES NO RESPONSIBILITY FOR INJURY OR PROPERTY

More information

Standard Sleep Pod Side Entry Assembly Instructions

Standard Sleep Pod Side Entry Assembly Instructions Standard Sleep Pod Side Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod Pod assembly onsite is a relatively simple exercise for two people

More information

Edge 28B. Simple. Clean. PARTS LIST KENT model: 908 4703 010 146 3087 000(1)2007-01

Edge 28B. Simple. Clean. PARTS LIST KENT model: 908 4703 010 146 3087 000(1)2007-01 PARTS LIST KENT model: 908 4703 010 Simple. Clean. 2007-01 2 2007-01 TABLE OF CONTENTS 1 DESCRIPTION PLAN GENERAL VIEW 2-3 CHASSIS SYSTEM 4-5 SIDE BROOM ASSEMBLY 6-7 HOPPER SYSTEM 8-9 TRANSMISSION SYSTEM

More information

Boiler Plan II Table of Contents

Boiler Plan II Table of Contents Cover Page Table Of Contents Introduction Parts List Additional Materials Assembly instructions Drawings 1-15 Boiler Plan II Table of Contents Introduction This will be a very rewarding project, if you

More information

.22 Tactical Rimfire

.22 Tactical Rimfire Quality Makes It A Colt TM.22 Tactical Rimfire COLT IS A LICENSED TRADEMARK OF NEW COLT HOLDING CORP.. Full metal Construction 1911.22 LR.22 Rimfire The pistols of the 1911.22 LR platform licensed and

More information

http://guninfo.tnet.com

http://guninfo.tnet.com Reconstructed Manual for a PA-63 Double Action Semi-Automatic Pistol 9x18mm Makarov More Gun Info can be found at: http://guninfo.tnet.com The contents of this manual were reconstructed from graphical

More information

TUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1

TUTORIAL. REbUILdING. front CALIpER O-RING CONVERSION CORVETTE 1965-82. Part #: HT-1 Part #: HT-1 1965-82 CORVETTE O-RING CONVERSION front CALIpER REbUILdING TUTORIAL Choosing a Brake Caliper Rebuild Kit Standard Lip Seals vs. O-Ring Seals Lip seal design seals are used on 1965-1982 Corvette

More information

CHROME FRONT BRAKE MASTER CYLINDER KIT

CHROME FRONT BRAKE MASTER CYLINDER KIT -J075 REV. 009-0-0 CHROME FRONT BRAKE MASTER CYLINDER KIT GENERAL Kit Number 5-99D, 5-99D Models These Chrome Master Cylinder Kits are designed to replace the original equipment front brake master cylinder

More information

DR ALL-TERRAIN FIELD and BRUSH MOWER

DR ALL-TERRAIN FIELD and BRUSH MOWER DR ALL-TERRAIN FIELD and BRUSH MOWER Parts List and Assembly Diagrams Important: Please read the Safety and Operating Instructions and the separate Engine Manufacturer s Owners Manual to become familiar

More information

GLOCK "SAFE ACTION" Gen4 GEN4 PISTOLS NEXT GENERATION OF PERFECTION

GLOCK SAFE ACTION Gen4 GEN4 PISTOLS NEXT GENERATION OF PERFECTION GLOCK "SAFE ACTION" GEN4 PISTOLS Gen4 NEXT GENERATION OF PERFECTION GLOCK GEN4 PISTOL SET The Gen4, just like any GLOCK pistol has the same time tested - Safe Action system - durable exterior finish -

More information

Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts.

Buy Karcher Parts Online: www.pressureparts.com. Need Technical Help? Call: 1-800-999-2245 email Requests to: sales@pressureparts. Karcher Model: K 620-M * ( 59556440 ) - Parts Section:1.1 TOP PART Page 1 of 18 1 50346460 1 STRAP 2 63031250 6 SCREW 3 50670230 1 COVER 4 63031940 2 SELF-TAPPING SCREW 5 50309650 1 COVER 6 50635710 1

More information

UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary

More information

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure 2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts

More information

PVM Piston Pumps Service Manual

PVM Piston Pumps Service Manual PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...

More information

Guide for Modified Assembly: Lightning McQueen. By: Collin Patterson, University of Delaware. Materials and Tools:

Guide for Modified Assembly: Lightning McQueen. By: Collin Patterson, University of Delaware. Materials and Tools: Guide for Modified Assembly: Lightning McQueen By: Collin Patterson, University of Delaware Materials and Tools: PVC o 40 inches of 1 in diameter PVC o 25 inches of ¾ in PVC o 4 x 1 in elbows o 2 x ¾ in

More information

PRISLISTE - SPERO NORGE AS Plus Line - 2015 RE : (compact) AU- 2A Dato : Des. 31, 2014

PRISLISTE - SPERO NORGE AS Plus Line - 2015 RE : (compact) AU- 2A Dato : Des. 31, 2014 3 02-211- 719BMF 19PC 1/4" Dr. Socket Set w/swivel Universal Ratchet Wrench-6PT-Metric (4,4.5,5,5.5,6,7,8,9,10,11,12,13,14mm) 857,71 3 02-311- 722BMF 22PC 3/8" Dr. Socket Set w/swivel Universal Ratchet

More information