K-Series Rooftop Units 60 HZ ASHRAE 90.1 COMPLIANT

PRODUCT SPECIFICATIONS PACKAGED HEAT PUMP KH K-Series Rooftop Units 60 HZ Bulletin No. KHA/KHB-04-074 (4/06) MODEL NUMBER IDENTIFICATION Brand/Family K = K-Series Product Line Unit Type H = Packaged Heat Pump Major Design Sequence A = st Generation B = nd Generation Nominal Cooling Capacity - Tons 04 = Tons 00 =.5 Tons 06 = Tons 048 = 4 Tons 060 = 5 Tons 07 = 6 Tons 074 = 6 Tons to 6 Tons Net Cooling Capacity,000 to 69,000 Btuh Net Heating Capacity 5,000 to 70,000 Btuh Optional Electric Heat 5 to 0 kw K H B 060 S 4 B N Y Blower Type D = Direct Drive B = Belt Drive T = Belt Drive ( Speed) Voltage P = 08/0V phase-60hz Y = 08/0V- phase-60hz G = 460V- phase-60hz J = 575V- phase-60hz Minor Design Sequence = st Revision = nd Revision = rd Revision Factory Installed Electric Heat N = No Heat ASHRAE 90. COMPLIANT Cooling Efficiency S = Standard Efficiency Refrigerant Type 4 = R-40A

FEATURES AND BENEFITS G J M P C F L E O D I B N H K KHA07S (Heat Pump) Shown With Optional Electric Heat, Economizer, Power Exhaust and Hinged Access Panels K-Series rooftop units from Allied are the new standard for reliable, efficient rooftop units built for long-lasting performance that can significantly improve indoor environments. K-Series rooftop units feature: R-40A Refrigerant - Environmentally friendly. Single Speed Scroll Compressor - Furnished on all KHA and KHB04 through 07 models. Two-Stage Scroll Compressor - Furnished on all KHB074 models. Allows rooftop units to deliver just the necessary amount of cooling needed to meet the space s demand. High Pressure Switches - Protect compressor. Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow. Direct or Belt Drive Blower Motors - Direct drive (04, 00, 06 and 048 models). Belt drive motors (06, 048, 060, 07 and 074 models) to maximize air performance. Independent Motor Mounts - Allows for easy and efficient service access without removing the top panel. Downflow or Horizontal Airflow - Easy field conversion. Two Fork Lift Slots on Three Sides - Easy to pick up and transport units from almost any angle. Corrosion-Resistant Removable, Reversible Drain Pan - Provides application flexibility, durability and improved serviceability. Thermostatic Expansion Valves - Provide peak cooling performance across the entire application range. Common Components - Many maintenance items are standard throughout the entire product line, reducing the need to carry different parts to the job or maintain in inventory. K-Series Packaged Heat Pump to 6 Tons / Page

FEATURES AND BENEFITS CONTENTS Blower Data - Belt Drive..........................5 Blower Data - Direct Drive......................... Cooling / Heating Ratings - KHA......................0 Cooling / Heating Ratings - KHB......................7 Dimensions - Accessories......................... 5 Dimensions - Unit - KHA..........................49 Dimensions - Unit - KHB..........................50 Electrical/Electric Heat Data - KHB.....................5 Electric Heat Capacities.......................... 46 Features And Benefits........................... Model Number Identification........................ Options / Accessories - KHA/KHB..................... 8 Options / Accessories - KHA Only..................... Options / Accessories - KHB Only..................... Outdoor Sound Data............................47 Specifications - Belt Drive Blower - KHA..................6 Specifications - Belt Drive Blower - KHB..................4 Specifications - Direct Drive Blower - KHA.................5 Specifications - Direct Drive Blower - KHB................. Unit Clearances.............................. 46 Weight Data................................ 48 APPROVALS AHRI Certified to AHRI Standard 0/40-008 ( thru 5 ton models) and AHRI Standard 40/60-007 (6 ton models). ETL listed. CSA listed. Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National and Canadian Electrical Codes. All models are ASHRAE 90. compliant ISO 900 Registered Manufacturing Quality System. WARRANTY Limited five years on compressors. Limited five years Optional High Performance Economizers. Limited one year all other covered components. B COOLING / HEATING SYSTEM Designed to maximize sensible and latent cooling performance at design conditions. System can operate from 0 F to 5 F without any additional controls. R-40A Refrigerant Non-chlorine, ozone friendly, R-40A. Unit pre-charged with refrigerant. See Specification table. Single Speed Scroll Compressor (04 through 07 Models) Scroll compressors for high performance, reliability and quiet operation. Resiliently mounted on rubber grommets for quiet operation. Copeland Scroll Ultra Tech Two-Stage Compressor (074 Models) Two-stage scroll compressors for increased part load efficiency, high performance, reliability and quiet operation. C D E Resiliently mounted on rubber grommets for quiet operation. Compressor Crankcase Heater Protects against refrigerant migration that can occur during low ambient operation. High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation. Check/Thermal Expansion Valves Assures optimal performance throughout the application range. Removable element head. Reversing Valve 4-way interchange reversing valve effects a rapid change in direction of refrigerant flow resulting in quick changeover from cooling to heating and vice versa. Defrost Control Provides a defrost cycle, if needed, every 0 or 60 or 90 minutes (adjustable) of compressor on time at outdoor coil temperature below 5 F. Temperature switch mounted on outdoor coil liquid line terminates defrost cycle. Filter/Drier High capacity filter/drier protects the system from dirt and moisture. Freezestat Protects the evaporator coil from damaging ice build-up due to conditions such as low/no air flow, or low refrigerant charge. Coil Construction Copper tube construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested. Indoor Coil Cross row circuiting with rifled copper tubing optimizes both sensible and latent cooling capacity. K-Series Packaged Heat Pump to 6 Tons / Page

F G FEATURES AND BENEFITS COOLING / HEATING SYSTEM (continued) Condensate Drain Pan Plastic pan, sloped to meet drainage requirements of ASHRAE 6.. Side or bottom drain connections. Reversible to allow connection at back of unit. Outdoor Coil Fan Motor Thermal overload protected, totally enclosed, permanently lubricated sleeve (04, 00, 06 and 048 models) or ball bearings (060, 07 and 074 models), shaft up, wire basket mount. Outdoor Coil Fan PVC coated fan guard furnished. Required Selections Cooling Capacity Specify nominal cooling capacity of the unit. Options/Accessories Field Installed Condensate Drain Trap Field installed only. Available in copper or PVC. Drain Pan Overflow Switch Monitors condensate level in drain pan, shuts down unit if drain becomes clogged. Low Ambient Kit Cycles the outdoor fan while allowing compressor operation in the cooling cycle. This intermittent fan operation allows the system to operate without icing the evaporator coil and losing capacity. Designed for use in ambient temperatures no lower than 0 F. CABINET Construction Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation. Base rails have rigging holes. Three sides of the base rail have fork slots. H I J Raised edges around duct and power entry openings in the bottom of the unit provide additional protection against water entering the building. Airflow Choice Units are shipped in down-flow (vertical) configuration, can be field converted to horizontal air flow configuration without the need of a kit. Power Entry Electrical lines can be brought through the unit base or through horizontal access knock-outs. Exterior Panels Constructed of heavy-gauge, galvanized steel with a two-layer enamel paint finish. Insulation All panels adjacent to conditioned air are fully insulated with nonhygroscopic fiberglass insulation. Unit base is fully insulated. The insulation also serves as an air seal to the roof curb, eliminating the need to add a seal during installation. Access Panels Access panels are provided for the economizer/filter section, heating/blower section, and the compressor/controls section. NOTE - KHA060/07 and KHB048/060/074 models include a filler panel for proper cabinet fit for optional accessories (Economizers,, Outdoor Air Dampers and Barometric Relief Dampers). Options/Accessories Factory Installed Corrosion A completely flexible immersed coating with an electrodeposited dry film process. (AST ElectroFin E-Coat) Meets Mil Spec MIL-P-5084, ASTM B7 Standard Method Salt Spray Testing. Indoor Corrosion : - Coated coil - Painted blower housing - Painted base K L Outdoor Corrosion : - Coated coil - Painted base Hinged Access Panels Large access panels are hinged and have quarter-turn latches for quick and easy access to maintenance areas (economizer / filter, compressor / controls, heating / blower). Field Installed Combination Coil/Hail Guards Heavy gauge steel frame painted to match cabinet with expanded metal mesh to protect the outdoor coil from damage. BLOWER A wide selection of supply air blower options are available to meet a variety of air flow requirements. Motor Overload protected, equipped with ball bearings (belt drive) or sleeve bearings (direct drive). Direct drive motors are offered on 04, 00, 06 and 048 models. Single Speed belt drive motors are offered on 06, 048, 060 and 07 models and are available in several different sizes to maximize air performance. Two-speed belt drive motors (low static/high static) are available on 074 models in several different sizes to maximize air performance. Supply Air Blower Forward curved blades, blower wheel is statically and dynamically balanced. All belt drive motors have adjustable pulley for speed change. Ordering Information Specify direct drive or belt drive motor. For belt drive, specify motor horsepower and drive kit number when base unit is ordered. K-Series Packaged Heat Pump to 6 Tons / Page 4

M FEATURES AND BENEFITS BLOWER (continued) Required Selections Supply Air Blower Order one, belt drive or direct drive (See Blower Data Table for specifications). Order one drive kit, belt drive only, see Drive Kit Specifications Table. CONTROLS Unit Control All control voltage is provided via a 4V (secondary) transformer with built-in circuit breaker protection. Heat/Cool Staging - Capable of up to heat / cool staging with a third party DDC control system or thermostat. Low Voltage Terminal Block - Provides screw terminal connections for thermostat or controller wiring. Night Setback Mode - Saves energy by closing outdoor air dampers and operating supply fan on thermostat demand only. Options/Accessories Field Installed Smoke Detector Photoelectric type, installed in supply air section, return air section or both sections. Available with power board and single sensor (supply or return) or power board and two sensors (supply and return). Power board located in unit control compartment. INDOOR AIR QUALITY Air Filters Disposable inch filters furnished as standard. Options/Accessories Field Installed High Efficiency Air Filters Disposable MERV 8 or MERV ( Efficiency Reporting Value based on ASHRAE 5.) efficiency inch pleated filters. UVC Germicidal Lamps Helps eliminate mold and bacterial growth on the evaporator and drain pans. Improves indoor air quality and maintains efficiency of system by reducing fouling of evaporator coil. Indoor Air Quality (CO ) Sensor Monitors CO levels adjusts economizer dampers as needed for Demand Control Ventilation. N ELECTRICAL Marked & Color-Coded Wiring All electrical wiring is color-coded and marked to identify which components it is connecting. Electrical Plugs Positive connection electrical plugs are used to connect common accessories or maintenance parts for easy removal or installation. Required Selections Voltage Choice Specify when ordering base unit. Options/Accessories Factory or Field Installed Disconnect Switch up to 50 Amp Accessible from outside of unit, spring loaded weatherproof cover furnished. Main power to the unit is field connected to the disconnect which allows all power to be shut off for service. See Electrical/ Electric Heat tables for ordering information, page 5. GFI Service Outlets () 5V ground fault circuit interrupter (GFCI) type, non-powered, fieldwired. Field Installed Electric Heat Helix wound nichrome elements, individual element limit controls, wiring harness. Unit fuse block is furnished as standard. See Options / Accessories tables for ordering information. GFI Weatherproof Cover Single-gang cover. Heavy-duty UV-resistant polycarbonate case construction. Hinged base cover with gasket. K-Series Packaged Heat Pump to 6 Tons / Page 5

O OPTIONS / ACCESSORIES ECONOMIZER OPTIONS Factory or Field Installed Economizer (Standard and High Performance Common Features) Outdoor Air Hood is furnished. Factory installed Economizer can be ordered with two exhaust options: Barometric Relief Dampers and Exhaust Hood. No Exhaust. Field installed Economizer includes Barometric Relief Dampers with Exhaust Hood. Barometric Relief Dampers allow relief of excess air, aluminum blade dampers prevent blow back and outdoor air infiltration during off cycle, bird screen furnished. Occupied/Unoccupied mode with field furnished setback thermostat. Demand Control Ventilation (DCV) ready using optional CO sensors. Mixed Air Sensor is furnished for field installation in the rooftop unit. Sensor is factory installed when Economizers are factory installed. Single sensible sensor is furnished with Economizer and enables economizer operation if the outdoor temperature is less than the setpoint of the control. Horizontal Economizer Conversion kit is available for field installation. Standard Economizer Features (Not for Title 4) Gear-driven action, return air and outdoor air dampers, plugin connections to unit, neoprene seals, 4-volt, fully-modulating spring return motor. Standard Economizer Control Module The Standard Economizer Control Module can be adjusted to operate based on outdoor air temperatures. Economizer Controls: Damper Position - Can be set lower than traditional minimum air requirements resulting in cost savings. IAQ Sensor - Signals dampers to modulate and maintain 55 F when CO is higher than the CO setpoint. Demand Control Ventilation (DCV) LED - A steady green Demand Control Ventilation LED indicates the IAQ reading is higher than setpoint and requires more fresh air. Free Cool LED - A steady green LED indicates outdoor air is suitable for free cooling. Free Cooling runs when outdoor air temperature is lower than the set temperature on the economizer control. NOTE: The Free Cooling default setting for outdoor air temperature sensor is 55 F. High Performance Economizer Features Approved for California Title 4 building standards. ASHRAE 90.-00 compliant. Gear-driven action, high torque 4-volt fully-modulating spring return damper motor, return air and outdoor air dampers, plug-in connections to unit, nylon bearings, enhanced neoprene blade edge seals and flexible stainless steel jamb seals to minimize air leakage. NOTE - High Performance Economizers are not approved for use with enthalpy controls in Title 4 applications. High Performance Economizer Control Module Module provides inputs and outputs to control economizer based on parameter settings. Module automatically detects sensors by polling to determine which sensors are installed in system. Module displays any alarm messages (fault detection and diagnostics) as an aid in troubleshooting. Non-volatile memory retains parameter settings in case of power failure. Keypad with four navigation buttons and LCD screen is furnished for setting economizer parameters. Menu Up/Exit button returns to the main menu. Arrow Up button moves to the previous or next parameter within the selected menu. Arrow Down button moves to the next parameter within the selected menu. Select (enter) button confirms parameter selection. Main Menu Structure: STATUS (economizer and system operation status) SETPOINTS (settings for various setpoint parameters) SYSTEM SETUP (settings/ information about the system) ADVANCED SETUP (freeze protection, CO settings, stage delay and additional calibration settings) CHECKOUT (damper positions) ALARMS (output signal that can be configured for remote alarm monitoring) NOTE - The Free Cooling setpoint for Title 4 applications must be set based on the Climate Zone where the system is installed. See Section 40.4 Prescriptive Requirements for Space Conditioning Systems of the California Energy Commission s 0 Building Energy Efficiency Standards. Refer to Installation Instructions for complete setup information and menu parameters available. K-Series Packaged Heat Pump to 6 Tons / Page 6

P OPTIONS / ACCESSORIES ECONOMIZER OPTIONS (continued) Factory or Field Installed Single Enthalpy Temperature Control (Not for Title 4) Outdoor air enthalpy sensor enables Economizer if the outdoor enthalpy is less than the setpoint of the control. Field Installed Differential Enthalpy Control (Not for Title 4) Order two Single Enthalpy Controls. One is field installed in the return air section, the other in the outdoor air section. Allows the economizer control board to select between outdoor air or return air, whichever has lower enthalpy. Horizontal Economizer Conversion Kit Insulated panel covers the bottom return air opening on the unit base to convert downflow Economizer to horizontal airflow. EXHAUST OPTION Field Installed Fan Installs internal to unit for downflow applications only with Economizer option. Provides exhaust air pressure relief. Interlocked to run when supply air blower is operating, fan runs when outdoor air dampers are 50% open (adjustable), motor is overload protected. Fan is 6 in. diameter with 4 fan blades and a / hp motor. NOTE - Not available for 04 and 00 models. NOTE - If is field installed with a factory installed Economizer, the Economizer must be ordered with the No Exhaust option and the Barometric Relief Dampers with Exhaust Hood must also be ordered separately for field installation. OUTDOOR AIR OPTIONS Factory or Field Installed Outdoor Air Dampers - Downflow or Horizontal Linked mechanical dampers, 0 to 5% (fixed) outdoor air adjustable, installs in unit. Automatic model features fully modulating spring return damper motor with plug-in connection. Manual model features a slide damper. mixed air temperature in cooling mode: 00 F. Outdoor Air Hood is furnished. ROOF CURBS Hybrid Roof Curbs, Downflow Nailer strip furnished, mates to unit, U.S. National Roofing Contractors Approved, shipped knocked down. Roof curb can be assembled using interlocking tabs to fasten corners together. No tools required. Curb can also be fastened together with furnished hardware. Available in 8, 4, 8, and 4 inch heights. Full Perimeter Curbs, Downflow (07 and 074 Models Only) Hybrid roof curbs can be assembled using interlocking tabs to fasten corners together. No tools required. Hybrid roof curbs can also be fastened together with furnished hardware. Available in 8, 4, 8, and 4 inch heights. NOTE - 07 and 074 models can be used on smaller 79-/4 in. Hybrid Roof Curbs (not full perimeter) with 5-/4 in. overhang at condenser end of unit. See dimension drawing on page 55. Adjustable Pitch Curb Fully adjustable pitch curb provides a level platform for rooftop units allowing flexible installations on roofs with uneven or sloped angles. slope is /4 in. per foot in any direction. Uses interlocking tabs to fasten corners together. No tools required. Hardware is furnished to connect upper curb with lower curb. Available in 4 inch height. Adaptor Curbs (not shown) Curbs are regionally sourced. Dimensions will vary based upon the source. Contact your local sales representative for a detailed cut sheet with applicable dimensions. CEILING DIFFUSERS Ceiling Diffusers (Flush and Step-Down) Aluminum grilles, large center grille, insulated diffuser box with flanges, hanging rings furnished, interior transition (even air flow), internally sealed (prevents recirculation), adapts to T bar ceiling grids or plaster ceilings. Transitions (Supply and Return) Used with diffusers, installs in roof curb, galvanized steel construction, flanges furnished for duct connection to diffusers, fully insulated. K-Series Packaged Heat Pump to 6 Tons / Page 7

OPTIONS / ACCESSORIES - KHA/KHB Item COOLING SYSTEM Model No. Catalog No. KHB 04 KHB 00 Unit Model No. KHA KHA KHA KHB KHB KHB 06 048 060 KHA KHB 07 074 Condensate Drain Trap PVC - CTRAP0AD 76W6 X X X X X X X Copper - CTRAP0AD 76W7 X X X X X X X Drain Pan Overflow Switch KSNSR7AB 74W4 X X X X X X X Low Ambient Kit KSNSRA- 4D96 X X X X X X X Efficiency Standard O O O O O O O Refrigerant Type R-40A O O O O O O O Blower - SUPPLY AIR Motors Direct Drive - 0.5 hp (08/0V-ph) Factory O O Drive Kits See Blower Data Tables for selection CABINET Direct Drive - 0.5 hp (08/0V-ph, 08/0V-ph, 460V-ph, 575V-ph) Factory O O Belt Drive - 0.75 hp (08/0V-ph) Standard Efficiency Factory O O O Belt Drive -.5 hp (08/0V-ph) Standard Efficiency Factory O O O Belt Drive - hp (08/0V, 460V, 575V-ph) Standard Efficiency Factory O O O Belt Drive -.5 hp (08/0V, 460V, 575V-ph) Standard Efficiency Factory O Belt Drive - hp (08/0V, 460V, 575V-ph) Standard Efficiency Factory O O O O Belt Drive - hp (08/0V, 460V, 575V-ph) ( Speed) Factory O Belt Drive - hp (08/0V, 460V, 575V-ph) ( Speed) Factory O Kit A0 - TDRKT00- - 67-00 rpm Factory O Kit A0 - TDRKT00- - 745-7 rpm Factory O Kit A0 - TDRKT00- - 8-50 rpm Factory O Kit A04 - TDRKT004- - 968-40 rpm Factory O O Kit A05 - TDRKT005- - 897-46 rpm Factory O Kit A06 - TDRKT006- - 07-49 rpm Factory O Kit A07 - TDRKT007- - -548 rpm Factory O Kit A08 - TDRKT008- - 9-59 rpm Factory O O Corrosion O O O O O O O Hinged Access Panels O O O O O O O CONTROLS Commercial Controls X X X X X X X BACnet Thermostat with Display K0SNSR0FF 97W X X X X X X X BACnet Thermostat without Display K0SNSR00FF 97W4 X X X X X X X Plenum Cable (75 ft.) K0MISC00FF 97W5 X X X X X X X Smoke Detector - Supply or Return (Power board and one sensor) Smoke Detector - Supply and Return (Power board and two sensors) phase belt drive blower motors are available for KHB models only. NOTE - The catalog and model numbers that appear here are for ordering field installed accessories only. OX - Field Installed or Configure to Order (factory installed) O - Configure to Order (Factory Installed) X - Field Installed CSNSR44AP 5W78 X X X X X X X CSNSR4AP 5W79 X X X X X X X K-Series Packaged Heat Pump to 6 Tons / Page 8

OPTIONS / ACCESSORIES - KHA/KHB Item ECONOMIZER Model No. Standard Economizer With Outdoor Air Hood (Sensible Control) (Not for Title 4) Standard Economizer - Includes Barometric Relief Dampers and Exhaust Hood Catalog No. KHB 04 KHB 00 Unit Model No. KHA KHA KHA KHB KHB KHB 06 048 060 KHA KHB 07 074 KECON0A-- 4D90 OX OX OX OX OX OX OX Economizer - No Exhaust Factory O O O O O O O Standard Economizer Controls (Not for Title 4) Single Enthalpy Control CSNSR64FF 5W64 OX OX OX OX OX OX OX Differential Enthalpy Control (order ) CSNSR64FF 5W64 X X X X X X X High Performance Economizer With Outdoor Air Hood (Sensible Control) (Approved for California Title 4 Building Standards) High Performance Economizer - Includes Barometric Relief Dampers and Exhaust Hood KECONA- 4D9 OX OX OX OX OX OX OX Hgh Performance Economizer - No Exhaust Factory O O O O O O O High Performance Economizer Controls (Not for Title 4) Single Enthalpy Control CSNSR60FF 0Z75 OX OX OX OX OX OX OX Differential Enthalpy Control (order ) CSNSR60FF 0Z75 X X X X X X X Economizer Accessories Horizontal Economizer Conversion Kit THECK00AN 7W45 X X X X X X X OUTDOOR AIR Outdoor Air Dampers - Includes Outdoor Air Hood Manual CDAMPA- 5W4 OX OX OX OX OX OX OX Motorized KDAMPA- 79W95 OX OX OX OX OX OX OX POWER EXHAUST FAN Standard Static NOTE - Order Barometric Relief Dampers with Exhaust Hood below if unit is ordered with factory installed Economizer with No Exhaust option BAROMETRIC RELIEF 08/0V- or ph - CPWRE0A-P 79W87 X X X X X 460V-ph - CPWRE0A-G 79W88 X X X X X 575V-ph - CPWRE0A-J 79W89 X X X X X Barometric Relief Dampers with Exhaust Hood CDAMP50A-- 74W8 X X X X X X X Required when Economizer is factory installed (no exhaust option) with field installed Fan option. NOTE - The catalog and model numbers that appear here are for ordering field installed accessories only. OX - Field Installed or Configure to Order (factory installed) O - Configure to Order (Factory Installed) X - Field Installed K-Series Packaged Heat Pump to 6 Tons / Page 9

OPTIONS / ACCESSORIES - KHA/KHB Item ELECTRICAL Model No. Catalog No. KHB 04 KHB 00 Unit Model No. KHA KHA KHA KHB KHB KHB 06 048 060 KHA KHB 07 074 Disconnect See Electrical/Electric Heat Tables for selection OX OX OX OX OX OX OX Voltage 60 hz GFI Service Outlets 08/0V - phase O O O O O 08/0V - phase O O O O O 460V - phase O O O O O 575V - phase O O O O O 5 amp non-powered, field-wired (08/0V, 460V only) LTAGFIK0/5 74M70 OX OX OX OX OX OX OX 0 amp non-powered, field-wired (575V only) CGFCI0FF 67E0 X X X X X X X Weatherproof Cover for GFI CGFCI99FF 0C89 X X X X X X X ELECTRIC HEAT 5 kw 08/0V- ph - KEH0050A-P F06 X X 7.5 kw 08/0V-ph - TEH0075ANP 4W X X X X X 08/0V-ph - TEH0075ANY 4W5 X X X X X 460V-ph - TEH0075ANG 4W9 X X X X X 575V-ph - TEH0075ANJ 4W4 X X X X X 0 kw 08/0V-ph - TEH000AP 0W6 X X 5 kw 08/0V-ph - TEH050ANP 4W X X X 08/0V-ph - TEH050ANY 4W6 X X X X X 460V-ph - TEH050ANG 4W40 X X X X X 575V-ph - TEH050ANJ 4W44 X X X X X.5 kw 08/0V-ph - TEH05ANP 4W4 X 08/0V-ph - TEH05ANY 4W7 X X X 460V-ph - TEH05ANG 4W4 X X X 575V-ph - TEH05ANJ 4W45 X X X 0 kw 08/0V-ph - TEH000N-Y 4W8 X X KHB models only. NOTE - The catalog and model numbers that appear here are for ordering field installed accessories only. OX - Field Installed or Configure to Order (factory installed) O - Configure to Order (Factory Installed) X - Field Installed 460V-ph - TEH000N-G 4W4 X X 575V-ph - TEH000N-J 4W46 X X K-Series Packaged Heat Pump to 6 Tons / Page 0

OPTIONS / ACCESSORIES - KHA/KHB Item Indoor Air Quality Indoor Air Quality (Co ) Sensors Model No. Catalog No. KHB 04 KHB 00 Unit Model No. KHA KHA KHA KHB KHB KHB 06 048 060 KHA KHB 07 074 Sensor - Wall-mount, off-white plastic cover with LCD display C0SNSR50ASL 77N9 X X X X X X X Sensor - Wall-mount, black plastic case, no display, rated for plenum mounting C0SNSR5AEL 87N54 X X X X X X X CO Sensor Duct Mounting Kit - for downflow applications 85L4 X X X X X X X Aspiration Box - for duct mounting non-plenum rated CO sensor (77N9) UVC Germicidal Lamps 90N4 X X X X X X X UVC Light Kit (08/0v-ph) EUVCL0AN 50W90 X X X X X X X ROOF CURBS Hybrid Roof Curbs, Downflow 8 in. height CCURB70A- F50 X X X X X X X 4 in. height CCURB7A- F5 X X X X X X X 8 in. height CCURB7A- F5 X X X X X X X 4 in. height CCURB7A- F5 X X X X X X X Hybrid Roof Curbs, Full Perimeter, Downflow 8 in. height KCURB70AP S47 X X 4 in. height KCURB7AP S48 X X 8 in. height KCURB7AP T0 X X 4 in. height KCURB7AP T06 X X Adjustable Pitch Curb, Downflow 4 in. height CCURB55AT 4W7 X X X X X X X CEILING DIFFUSERS Step-Down - Order one RTD9-65-R 7G87 X X X X X RTD-95 9G04 X X Flush - Order one FD9-65-R 7G86 X X X X X FD-95 9G08 X X Transitions (Supply and Return) - Order one TTRAN0AN 7W5 X X X X X TTRAN0N- 7W54 X X Lamps operate on 0-0V single-phase power supply. Step-down transformer may be ordered separately for 460V and 575V units. Alternately, 0V power supply may be used to directly power the UVC ballast(s). 07 and 074 models will fit smaller roof curbs with overhang. See dimension drawing. NOTE - The catalog and model numbers that appear here are for ordering field installed accessories only. OX - Field Installed or Configure to Order (factory installed) O - Configure to Order (Factory Installed) X - Field Installed K-Series Packaged Heat Pump to 6 Tons / Page

OPTIONS / ACCESSORIES - KHA ONLY Item Model No. Catalog No. Unit Model No. CABINET Combination Coil/Hail Guards CGARD5A- R98 X X CGARD5AT T0 X KGARD50AP T7 X CONTROLS BACnet K0CTRLA- 96W4 OX OX K0CTRLAP B99 OX OX Novar 05 K0CTRL0A- 96W OX OX K0CTRL0AP B98 OX OX INDOOR AIR QUALITY Air Filters High Efficiency Air Filters Order 4 per unit NOTE - The catalog and model numbers that appear here are for ordering field installed accessories only. OX - Field Installed or Configure to Order (factory installed) O - Configure to Order (Factory Installed) X - Field Installed. KHA 06 KHA 048 KHA 060 MERV 8 (6 x 0 x ) - CFLTR5A-- 54W0 X X MERV (6 x 0 x ) - TFLTR40A-- 5W7 X X MERV 8 (0 x 0 x ) - CFLTR5D-- 54W X X MERV (0 x 0 x ) - CFLTR40D-- 5W9 X X KHA 07 OPTIONS / ACCESSORIES - KHB ONLY Item Model No. Catalog No. Unit Model No. CABINET Combination Coil/Hail Guards CGARD5A- R98 X X X CGARD5AT T0 X X X CONTROLS BACnet K0CTRLA- 96W4 OX OX OX K0CTRLAP B99 OX OX OX Novar 05 K0CTRL0A- 96W OX OX OX K0CTRL0AP B98 OX OX OX INDOOR AIR QUALITY Air Filters High Efficiency Air Filters Order 4 per unit NOTE - The catalog and model numbers that appear here are for ordering field installed accessories only. OX - Field Installed or Configure to Order (factory installed) O - Configure to Order (Factory Installed) X - Field Installed. KHB 04 KHB 00 KHB 06 KHB 048 KHB 060 MERV 8 (6 x 0 x ) - CFLTR5A-- 54W0 X X X MERV (6 x 0 x ) - TFLTR40A-- 5W7 X X X MERV 8 (0 x 0 x ) - CFLTR5D-- 54W X X X MERV (0 x 0 x ) - CFLTR40D-- 5W9 X X X KHB 074 K-Series Packaged Heat Pump to 6 Tons / Page

SPECIFICATIONS - DIRECT DRIVE BLOWER - KHB General Data Nominal Tonnage Ton.5 Ton Ton 4 Ton Model No. KHB04S4D KHB00S4D KHB06S4D KHB048S4D Efficiency Type Standard Standard Standard Standard Blower Type Multi-Speed Direct Drive Multi-Speed Direct Drive Multi-Speed Direct Drive Multi-Speed Direct Drive Cooling Gross Cooling Capacity - Btuh,700 9,700 6,00 48,700 Performance Net Cooling Capacity - Btuh,000 8,800 5,000 46,500 AHRI Rated Air Flow - 860 00 00 670 Sound Rating Number (SRN) (dba) 75 75 75 75 Total Unit Power - kw.0.4.0 4. SEER (Btuh/Watt) 4.0 4.0 4.0 4.0 EER (Btuh/Watt).7.9.5.4 Refrigerant Type R-40A R-40A R-40A R-40A Charge Furnished lbs. 8 oz. lbs. 0 oz. lbs. 0 oz. 4 lbs. 7 oz. Heating Total High Heating Capacity - Btuh 5,000 0,000 6,600 49,500 Performance Total Unit Power - kw.9.4.9.9 COP.76.7.64.7 HSPF - Region IV (Region V) 8.00 (6.70) 8.00 (6.70) 8.00 (6.70) 8.00 (6.70) Total Low Heating Capacity - Btuh 4,400 7,00,000 0,000 Total Unit Power - kw.8..7.7 COP.8.0..40 Electric Heating Options - See page 0 5, 7.5, 0 kw 5, 7.5, 0 kw 7.5, 5 kw 7.5, 5 kw Compressor Type (no.) Scroll () Scroll () Scroll () Scroll () Outdoor Coil Outdoor Coil Fan Net face area - sq. ft. 5.6 5.6 5.6 9. Tube diameter - in. /8 /8 /8 /8 Number of rows Fins / inch 0 0 0 0 Motor - (No.) HP /4 /4 /4 /4 Motor rpm 85 85 85 85 Total Motor Input - watts 0 0 40 90 Diameter - (No.) in. / No. of blades () 4 - () 4 - () 4 - () 4 - Total air volume - 00 00 00 900 Indoor Coil Net face area - sq. ft. 7.8 7.8 7.8 9.7 Tube diameter - in. /8 /8 /8 /8 Number of rows Fins / inch 4 4 4 4 Drain Connection (no.) and size - in. () NPT () NPT () NPT () NPT Expansion device type Balanced Port Thermostatic Expansion Valve, removable power head Indoor Nominal Motor HP 0.5 0.5 0.5 0.5 Blower Wheel nom. diameter x width - in. () 0 x 0 () 0 x 0 () 0 x 0 () 0 x 0 Filters Type Disposable Disposable Number and size - in. (4) 6 x 0 x (4) 0 x 0 x Electrical Characteristics - 60 hz 08/0V - phase 08/0V phase 08/0V phase 08/0V, 460V & 575V phase NOTE - Net capacity includes evaporator blower motor heat deduction. Gross capacity does not include evaporator blower motor heat deduction. AHRI Certified to AHRI Standard 0/40: Cooling Ratings - 95 F outdoor air temperature and 80 F db/67 F wb entering indoor coil air. High Temperature Heating Ratings - 47 F db/4 F wb outdoor air temperature and 70 F entering indoor coil air. Low Temperature Heating Ratings - 7 F db/5 F wb outdoor air temperature and 70 F entering indoor coil air. Sound Rating Number (SRN) rated in accordance with test conditions included in ARI Standard 70-95. 08/0V, 460V & 575V phase K-Series Packaged Heat Pump to 6 Tons / Page

SPECIFICATIONS - BELT DRIVE BLOWER - KHB General Data Nominal Tonnage Ton 4 Ton 5 Ton 6 Ton Model No. KHB06S4B KHB048S4B KHB060S4B KHB074S4T Efficiency Type Standard Standard Standard Standard Blower Type Single Speed Belt Drive Single Speed Belt Drive Single Speed Belt Drive Two-Speed Belt Drive Cooling Gross Cooling Capacity - Btuh 6,00 48,700 6,600 7,000 Performance Net Cooling Capacity - Btuh 5,000 46,500 60,000 68,000 AHRI Rated Air Flow - 00 670 00 00 Sound Rating Number (SRN) (dba) 75 75 80 8 Total Unit Power - kw.0 4. 5.0 6. SEER (Btuh/Watt) 4.0 4.0 4.0 - - - IEER (Btuh/Watt) - - - - - - - - - 4.0 EER (Btuh/Watt).55.4.9.0 Refrigerant Type R-40A R-40A R-40A R-40A Charge Furnished lbs. 0 oz. 4 lbs. 7 oz. 6 lbs. 0 oz. 4 lbs. 0 oz. Heating Performance Total High Heating Capacity - Btuh 6,600 49,500 58,000 70,000 Total Unit Power - kw.9.9 4.5 6. COP.64.7.7.0 HSPF - Region IV (Region V) 8.00 (6.70) 8.00 (6.70) 8.00 (6.70) - - - Total Low Heating Capacity - Btuh,000 0,000 4,600 40,000 Total Unit Power - kw.7.7 4. 5. COP..40.8.5 Electric Heating Options - See page 0 7.5, 5 7.5, 5 7.5, 5,.5 7.5, 5,.5, 0 kw Compressor Type (one per unit) Scroll Scroll Scroll Two-Stage Scroll Outdoor Coil Net face area - sq. ft. 5.6 9. 9. 8.0 Tube diameter - in. /8 /8 /8 /8 Number of rows Fins / inch 0 0 0 0 Outdoor Coil Fan Motor - (No.) HP () /4 () /4 () / () / Motor rpm 85 85 075 075 Total Motor Input - watts 40 90 405 505 Diameter - (No.) in. / No. of blades () 4 - () 4 - () 4 - () 4-4 Total air volume - 00 900 400 575 Indoor Coil Net face area - sq. ft. 7.8 9.7 9.7 9.7 Tube diameter - in. /8 /8 /8 /8 Number of rows 4 4 Fins / inch 4 4 4 4 Drain Connection (no.) and size - in. () NPT () NPT () NPT () NPT Expansion device type Balanced Port Thermostatic Expansion Valve, removable power head 4 Indoor Blower & Drive Selection Nominal Motor 08/0V-ph 0.75 hp,.5 hp 0.75 hp,.5 hp 0.75 hp,.5 hp - - - HP All others voltages hp, hp hp, hp hp, hp hp, hp Usable 08/0V-ph 0.86 hp,.7 hp 0.86 hp,.7 hp 0.86 hp,.7 hp - - - Motor HP All other voltages.5 hp,. hp.5 hp,. hp.5 hp,. hp. hp Available Drive Kits A0 67-00 rpm A0 745-7 rpm A0 8-50 rpm A04 968-40 rpm A05 A06 A07 A08 897-46 rpm 07-49 rpm - 548 rpm 9-59 rpm Wheel nominal diameter x width - in. () 0 x 0 () 0 x 0 () 0 x 0 () 0 x 0 Filters Type Disposable Number and size - in. (4) 6 x 0 x (4) 0 x 0 x Electrical Characteristics - 60 hz 08/0V phase K-Series Packaged Heat Pump to 6 Tons / Page 4 08/0V, 460V & 575V phase 08/0V phase 08/0V, 460V & 575V phase 08/0V phase 08/0V, 460V & 575V phase NOTE - Net capacity includes evaporator blower motor heat deduction. Gross capacity does not include evaporator blower motor heat deduction., AHRI Certified to AHRI Standard 0/40 or 40/60 for 074 model: Cooling Ratings - 95 F outdoor air temperature and 80 F db/67 F wb entering indoor coil air. High Temperature Heating Ratings - 47 F db/4 F wb outdoor air temperature and 70 F entering indoor coil air. Low Temperature Heating Ratings - 7 F db/5 F wb outdoor air temperature and 70 F entering indoor coil air. Sound Rating Number (SRN) rated in accordance with test conditions included in ARI Standard 70-95. 08/0V, 460V & 575V phase 4 Using total air volume and system static pressure requirements determine from blower performance tables rpm and motor hp required. usable hp of motors furnished are shown. In Canada, nominal motor hp is also maximum usable motor hp. If motors of comparable hp are used, be sure to keep within the service factor limitations outlined on the motor nameplate.

SPECIFICATIONS - DIRECT DRIVE BLOWER - KHA General Data Nominal Tonnage Ton 4 Ton Cooling Performance Model No. KHA06S4D KHA048S4D Efficiency Type Standard Standard Blower Type Multi-Speed Direct Drive Multi-Speed Direct Drive Gross Cooling Capacity - Btuh 7,00 49,000 Net Cooling Capacity - Btuh 5,600 47,000 AHRI Rated Air Flow - 60 600 Sound Rating Number (SRN) (dba) 75 75 Total Unit Power - kw. 4.4 SEER (Btuh/Watt).0.0 EER (Btuh/Watt) 0.9 0.7 Refrigerant Type R-40A R-40A Heating Performance Charge Furnished lbs. 8 oz. lbs. oz. Total High Heating Capacity - Btuh 6,400 48,000 Total Unit Power - kw.0 4.0 COP.6.5 HSPF - Region IV (Region V) 7.7 (6.7) 7.7 (6.7) Total Low Heating Capacity - Btuh,000 9,500 Total Unit Power - kw.8.6 COP..4 Electric Heating Options - See page 0 7.5, 5 kw 7.5, 5 kw Compressor Type (one per unit) Scroll () Scroll () Outdoor Coil Outdoor Coil Fan Net face area - sq. ft. 5.6 5.6 Tube diameter - in. /8 /8 Number of rows.0.0 Fins / inch 0 0 Motor - (No.) HP () /4 () /4 Motor rpm 85 85 Total Motor Input - watts 50 50 Diameter - (No.) in. / No. of blades () 4 - () 4 - Total air volume - 00 00 Indoor Coil Net face area - sq. ft. 7.78 7.78 Indoor Blower Tube diameter - in. /8 /8 Number of rows Fins / inch 4 4 Drain Connection (no.) and size - in. () NPT () NPT Expansion device type Balanced Port Thermostatic Expansion Valve, removable power head Nominal Motor HP 0.5 0.5 Wheel nom. diameter x width - in. () 0 x 0 () 0 x 0 Filters Type Disposable Electrical Characteristics - 60 hz Number and size - in. (4) 6 x 0 x 08/0V, 460V & 575V phase NOTE - Net capacity includes evaporator blower motor heat deduction. Gross capacity does not include evaporator blower motor heat deduction. AHRI Certified to AHRI Standard 0/40: Cooling Ratings - 95 F outdoor air temperature and 80 F db/67 F wb entering indoor coil air. High Temperature Heating Ratings - 47 F db/4 F wb outdoor air temperature and 70 F entering indoor coil air. Low Temperature Heating Ratings - 7 F db/5 F wb outdoor air temperature and 70 F entering indoor coil air. Sound Rating Number (SRN) rated in accordance with test conditions included in ARI Standard 70-95. 08/0V, 460V & 575V phase K-Series Packaged Heat Pump to 6 Tons / Page 5

SPECIFICATIONS - BELT DRIVE BLOWER - KHA General Data Nominal Tonnage Ton 4 Ton 5 Ton 6 Ton Model No. KHA06S4B KHA048S4B KHA060S4B KHA07S4B Efficiency Type Standard Standard Standard Standard Blower Type Single Speed Belt Drive Single Speed Belt Drive Single Speed Belt Drive Single-Speed Belt Drive Cooling Gross Cooling Capacity - Btuh 7,00 49,000 6,500 7,00 Performance Net Cooling Capacity - Btuh 5,600 47,000 59,000 69,000 AHRI Rated Air Flow - 60 600 985 060 Sound Rating Number (SRN) (dba) 75 75 8 8 Total Unit Power - kw. 4.4 5.4 6. SEER (Btuh/Watt).0.0.0 - - - IEER (Btuh/Watt) - - - - - - - - -. EER (Btuh/Watt) 0.9 0.7 0.9.0 Refrigerant Type R-40A R-40A R-40A R-40A Charge Furnished lbs. 8 oz. lbs. oz. 6 lbs. 0 oz. 0 lbs. 8 oz. Heating Performance Total High Heating Capacity - Btuh 6,400 48,000 60,500 70,000 Total Unit Power - kw.0 4.0 4.9 6. COP.6.5.6. HSPF - Region IV (Region V) 7.7 (6.7) 7.7 (6.7) 7.7 (6.7) - - - Total Low Heating Capacity - Btuh,000 9,500 6,000 40,000 Total Unit Power - kw.8.6 4.5 5.7 COP..4.4.5 Electric Heating Options - See page 0 7.5, 5 kw 7.5, 5 kw 7.5, 5,.5 kw 7.5, 5,.5, 0 kw Compressor Type (one per unit) Scroll Scroll Scroll Scroll Outdoor Coil Net face area - sq. ft. 5.6 5.6 9. 8.0 Tube diameter - in. /8 /8 /8 /8 Number of rows Fins / inch 0 0 0 0 Outdoor Coil Fan Motor - (No.) HP () /4 () /4 () / () / Motor rpm 85 85 075 075 Total Motor Input - watts 50 50 405 680 Diameter - (No.) in. / No. of blades () 4 - () 4 - () 4 - () 4-4 Total air volume - 00 00 4800 575 Indoor Coil Net face area - sq. ft. 7.78 7.78 9.7 9.7 Tube diameter - in. /8 /8 /8 /8 Number of rows 4 4 Fins / inch 4 4 4 4 Drain Connection (no.) and size - in. () NPT () NPT () NPT () NPT Expansion device type Balanced Port Thermostatic Expansion Valve, removable power head 4 Indoor Blower & Drive Selection Nominal Motor HP hp, hp hp, hp.5 hp, hp Usable Motor HP.5 hp,. hp.5 hp,. hp.7 hp,. hp Available Drive Kits A0 A0 A0 A04 67-00 rpm A05 897-46 rpm 745-7 rpm A06 07-49 rpm 8-50 rpm A07-548 rpm 968-40 rpm A08 9-59 rpm Wheel nom. diameter x width - in. () 0 x 0 () 0 x 0 () 0 x 0 () 0 x 0 Filters Type Disposable Disposable Number and size - in. (4) 6 x 0 x (4) 0 x 0 x Electrical Characteristics - 60 hz 08/0V, 460V & 575V phase 08/0V, 460V & 575V phase 08/0V, 460V & 575V phase NOTE - Net capacity includes evaporator blower motor heat deduction. Gross capacity does not include evaporator blower motor heat deduction., AHRI Certified to AHRI Standard 0/40 or 40/60: Cooling Ratings - 95 F outdoor air temperature and 80 F db/67 F wb entering indoor coil air. High Temperature Heating Ratings - 47 F db/4 F wb outdoor air temperature and 70 F entering indoor coil air. Low Temperature Heating Ratings - 7 F db/5 F wb outdoor air temperature and 70 F entering indoor coil air. Sound Rating Number (SRN) rated in accordance with test conditions included in ARI Standard 70-95. 08/0V, 460V & 575V phase 4 Using total air volume and system static pressure requirements determine from blower performance tables rpm and motor hp required. usable hp of motors furnished are shown. In Canada, nominal motor hp is also maximum usable motor hp. If motors of comparable hp are used, be sure to keep within the service factor limitations outlined on the motor nameplate. K-Series Packaged Heat Pump to 6 Tons / Page 6

COOLING / HEATING RATINGS - KHB NOTE For Temperatures and Capacities not shown in tables, see bulletin Cooling Unit Rating Table Correction Factor Data in Miscellaneous Engineering Data section. TON COOLING STANDARD EFFICIENCY KHB04S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 640.6 0.7 0.87 0..55 0.7 0.89 8.6.78 0.7 0.9 6.6.0 0.75 0.95 6 F 800.6.5 0.77 0.95.8.54 0.79 0.98 0.77 0.8 8..0 0.84 960 4.9. 0.8..5 0.85.4.75 0.88 9.5 0.9 640.7.5 0.55 0.69 0.8.9.54 0.55 0.7 0.85 0.76 0.54 0.7 0.88 8.0 0.54 0.7 0.9 67 F 800 5.. 0.59 0.75 0.9..5 0.59 0.77 0.94..75 0.59 0.79 0.97 9. 0.6 0.8 960 6.. 0.6 0.8 0.99 4..5 0.6 0.8..7 0.64 0.86 9.9.99 0.65 0.9 640 5.5. 0.4 0.54 0.67.6.5 0.9 0.54 0.68.7.74 0.8 0.54 0.69 9.5.99 0.6 0.54 0.7 7 F 800 7. 0.4 0.58 0.7 5..49 0.4 0.58 0.75.7 0.4 0.59 0.77 0.7.98 0.9 0.6 0.79 960 8..8 0.44 0.6 0.79 6..48 0.4 0.6 0.8.9.7 0.4 0.64 0.84.4.96 0.4 0.65 0.88 TON HEATING STANDARD EFFICIENCY KHB04S4 Indoor Coil Air Volume 70 F Dry Bulb Total Heating Capacity Air Temperature Entering Outdoor Coil 65 F 45 F 5 F 5 F -5 F Comp. Total Comp. Total Comp. Total Comp. Total Motor Input Heating Motor Input Heating Motor Input Heating Motor Input Heating Input Capacity Input Capacity Input Capacity Input Capacity Comp. Motor Input Input kbtuh kw kbtuh kw kbtuh kw kbtuh kw kbtuh kw 640 0.6.7..65 5.6.57 0..4 5..06 800.6.7.5 6.44 0.7.9 5.6 0.94 960.4.5 4..44 6.4.6.. 6 0.86.5 TON COOLING STANDARD EFFICIENCY KHB00S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 800 8.6 0.74 0.88 6.5.84 0.76 0.9 4.9. 0.78 0.9..4 0.8 0.96 6 F 000 9.6.6 0.79 0.95 8..85 0.8 0.97 6.4. 0.84 4.8.4 0.87 00.6 0.85 9.4.86 0.87 7.9. 0.9 6..4 0.9 800 9.7.6 0.59 0.7 0.84 8..85 0.59 0.7 0.87 6.4. 0.6 0.75 0.89 4.6.4 0.6 0.78 0.9 67 F 000..6 0.6 0.77 0.9 9.5.86 0.6 0.79 0.94 7.8. 0.64 0.8 0.97 5.8.4 0.66 0.84 00.4.64 0.65 0.8 0.98 0.6.87 0.66 0.85 8.6. 0.68 0.88 6.6.4 0.7 0.9 800.5.6 0.45 0.57 0.7 9.8.86 0.44 0.58 0.7 8.. 0.45 0.59 0.7 6..4 0.45 0.6 0.75 7 F 000..64 0.45 0.6 0.75..87 0.46 0.6 0.77 9.5. 0.46 0.6 0.79 7.4.4 0.47 0.65 0.8 00 4.4.65 0.47 0.64 0.8.4.88 0.47 0.65 0.8 0.4.4 0.48 0.67 0.85 8..4 0.49 0.69 0.88.5 TON HEATING STANDARD EFFICIENCY KHB00S4 Indoor Coil Air Volume 70 F Dry Bulb Total Heating Capacity Air Temperature Entering Outdoor Coil 65 F 45 F 5 F 5 F -5 F Comp. Total Comp. Total Comp. Total Comp. Total Motor Input Heating Motor Input Heating Motor Input Heating Motor Input Heating Input Capacity Input Capacity Input Capacity Input Capacity Comp. Motor Input Input kbtuh kw kbtuh kw kbtuh kw kbtuh kw kbtuh kw 800 7.. 8..0 8.8.89..7 6..8 000 7.8.96 8.7.85 9..74.7.55 6.6. 00 8..87 9..76 9.8.64..45 7..0 K-Series Packaged Heat Pump to 6 Tons / Page 7

COOLING / HEATING RATINGS - KHB NOTE For Temperatures and Capacities not shown in tables, see bulletin Cooling Unit Rating Table Correction Factor Data in Miscellaneous Engineering Data section. TON COOLING STANDARD EFFICIENCY KHB06S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 960 4.7. 0.7 0.87..7 0.7 0.89 9.7.69 0.74 0.9 6.9.06 0.77 0.96 6 F 00 6.9. 0.77 0.95 4..8 0.79 0.98.5.7 0.8 9.06 0.85 440 8.5. 0.8 6..9 0.86.6.7 0.89 0.9.07 0.9 960 7.. 0.56 0.69 0.8 4.6.8 0.56 0.7 0.85.8.7 0.56 0.7 0.88 8.9.06 0.57 0.74 0.9 67 F 00 9.. 0.59 0.75 0.9 6.4.9 0.6 0.77 0.94.4.7 0.6 0.8 0.98 0.4.07 0.6 0.8 440 40.5. 0.6 0.8 0.99 7.7.4 0.64 0.84 4.8.7 0.65 0.87.6.08 0.66 0.9 960 9.5. 0.4 0.54 0.67 6.8.4 0.4 0.55 0.68 4..7 0.4 0.55 0.7.07 0.9 0.56 0.7 7 F 00 4.5.4 0.4 0.58 0.7 8.9.4 0.4 0.59 0.75 5.9.7 0.4 0.6 0.77.7.08 0.4 0.6 0.8 440 4..5 0.45 0.6 0.79 40..4 0.45 0.6 0.8 7..7 0.44 0.65 0.84.7.09 0.44 0.67 0.88 TON HEATING STANDARD EFFICIENCY KHB06S4 Indoor Coil Air Volume 70 F Dry Bulb Total Heating Capacity Air Temperature Entering Outdoor Coil 65 F 45 F 5 F 5 F -5 F Comp. Total Comp. Total Comp. Total Comp. Total Motor Input Heating Motor Input Heating Motor Input Heating Motor Input Heating Input Capacity Input Capacity Input Capacity Input Capacity Comp. Motor Input Input kbtuh kw kbtuh kw kbtuh kw kbtuh kw kbtuh kw 960 45..6 4.5.45..8 5.4.0 7.7.5 00 45.8.45 5..8.9. 6.86 8..6 440 46.4.5 5.6.8 4.5.0 6.5.77 8.9.6 4 TON COOLING STANDARD EFFICIENCY KHB048S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 80 46.86 0.7 0.86 4..5 0.7 0.88 8..69 0.7 0.9.9 4. 0.74 0.95 6 F 600 49..87 0.77 0.95 45.6 0.79 0.98 4..7 0.8 7. 4. 0.8 90 5.9.88 0.84 48.7 0.86 44..7 0.88 40 4.6 0.9 80 49.4.87 0.54 0.68 0.8 45.4.6 0.54 0.69 0.85 4..7 0.5 0.7 0.87 6.9 4. 0.5 0.7 0.9 67 F 600 5.5.89 0.58 0.75 0.9 48..7 0.58 0.77 0.95 44.7 0.58 0.79 0.98 9. 4.4 0.59 0.8 90 54.8.9 0.6 0.8 0.99 50.4.9 0.6 0.84 45.8.74 0.6 0.86 4 4.6 0.65 0.9 80 5.88 0.9 0.5 0.66 48.8.7 0.8 0.5 0.67 44.6.7 0.6 0.5 0.68 40. 4.5 0.4 0.5 0.7 7 F 600 56..9 0.4 0.58 0.7 5.7.9 0.4 0.58 0.75 47.4.75 0.9 0.58 0.77 4.4 4.7 0.7 0.59 0.79 90 58.4.9 0.44 0.6 0.8 5.9. 0.4 0.6 0.8 49..76 0.4 0.6 0.84 4.9 4.9 0.4 0.65 0.88 4 TON HEATING STANDARD EFFICIENCY KHB048S4 Indoor Coil Air Volume 70 F Dry Bulb Total Heating Capacity Air Temperature Entering Outdoor Coil 65 F 45 F 5 F 5 F -5 F Comp. Total Comp. Total Comp. Total Comp. Total Motor Input Heating Motor Input Heating Motor Input Heating Motor Input Heating Input Capacity Input Capacity Input Capacity Input Capacity Comp. Motor Input Input kbtuh kw kbtuh kw kbtuh kw kbtuh kw kbtuh kw 80 60.4 46..9.04.6.76 0.6.06 600 6.. 47.4.96..8.7.5.7.8 90 6.9.96 48..8 4.66.5.7.6.67 K-Series Packaged Heat Pump to 6 Tons / Page 8

COOLING / HEATING RATINGS - KHB NOTE For Temperatures and Capacities not shown in tables, see bulletin Cooling Unit Rating Table Correction Factor Data in Miscellaneous Engineering Data section. 5 TON COOLING STANDARD EFFICIENCY KHB060S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 600 59..45 0.69 0.86 54.8.89 0.7 0.88 50. 4.4 0.7 0.9 45.4 5.05 0.7 0.96 6 F 000 6.6.46 0.75 0.96 58..9 0.77 0.99 5.7 4.44 0.8 49. 5.09 0.8 400 65.9.48 0.8 6.8.9 0.84 57. 4.47 0.88 5.5 5. 0.9 600 6.7.47 0.5 0.67 0.8 59..9 0.5 0.68 0.8 54. 4.45 0.5 0.69 0.87 49. 5.09 0.54 0.7 0.9 67 F 000 67.49 0.57 0.7 0.9 6.4.94 0.58 0.75 0.94 57. 4.47 0.58 0.77 0.99 5.7 5. 0.59 0.8 400 69.7.5 0.6 0.8 64.6.95 0.6 0.8 59.4 4.49 0.6 0.86 5.5 5. 0.64 0.9 600 68..49 0.9 0.5 0.65 6.6.94 0.8 0.5 0.65 58.6 4.48 0.7 0.5 0.67 5. 5. 0.6 0.5 0.69 7 F 000 7.8.5 0.4 0.56 0.7 66.9.96 0.4 0.57 0.7 6.5 4.5 0.4 0.58 0.75 55.8 5.5 0.9 0.59 0.78 400 74.4.5 0.4 0.6 0.77 69..98 0.4 0.6 0.8 6.7 4.5 0.4 0.6 0.8 57.6 5.6 0.4 0.64 0.88 5 TON HEATING STANDARD EFFICIENCY KHB060S4 Indoor Coil Air Volume 70 F Dry Bulb Total Heating Capacity Air Temperature Entering Outdoor Coil 65 F 45 F 5 F 5 F -5 F Comp. Total Comp. Total Comp. Total Comp. Total Motor Input Heating Motor Input Heating Motor Input Heating Motor Input Heating Input Capacity Input Capacity Input Capacity Input Capacity Comp. Motor Input Input kbtuh kw kbtuh kw kbtuh kw kbtuh kw kbtuh kw 600 7.6.9 55..68 8.4.4 5..08.8. 000 7..66 55.9.4 9.7 6.8.5.05 400 7.5.5 57..6 40..0 7..66 4.7.89 6 TON COOLING STANDARD EFFICIENCY KGB074S4 (ST STAGE) Outdoor Air Temperature Entering Outdoor Coil Entering Total 65 F 75 F 85 F 95 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 00 5.. 0.7 0.8 0.9 49.9.55 0.7 0.8 0.94 47.4.9 0.7 0.8 0.96 44.7. 0.7 0.85 0.98 6 F 600 56.6. 0.74 0.88 54..54 0.75 0.9 5.5.9 0.77 0.9 48.5. 0.78 0.95 000 59.9. 0.8 0.95 57..5 0.8 0.97 54.5.89 0.8 0.99 5.6. 0.85 00 55.8. 0.55 0.67 0.77 5.5.54 0.55 0.67 0.78 5.9 0.56 0.68 0.79 48.. 0.56 0.69 0.8 67 F 600 60.5. 0.58 0.7 0.85 57.9.5 0.59 0.7 0.86 55..89 0.59 0.74 0.88 5. 0.6 0.76 0.9 000 6.8.9 0.6 0.77 0.9 6.5 0.6 0.79 0.94 58.88 0.6 0.8 0.96 54.5.9 0.64 0.8 0.99 00 59.9. 0.4 0.5 0.64 57.4.5 0.4 0.54 0.65 54.7.88 0.4 0.54 0.65 5.7. 0.4 0.54 0.66 7 F 600 64.8.8 0.45 0.57 0.7 6.9.5 0.44 0.57 0.7 59.87 0.44 0.58 0.7 55.7.9 0.4 0.59 0.7 000 68..6 0.45 0.6 0.75 65..49 0.45 0.6 0.76 6.9.86 0.46 0.6 0.78 58.4.8 0.46 0.6 0.8 6 TON COOLING STANDARD EFFICIENCY KGB074S4 (ND STAGE) Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 90 66.8 4. 0.75 0.89 6. 4.77 0.76 0.9 59. 5.4 0.77 0.9 55. 6.7 0.8 0.97 6 F 400 70. 4.4 0.8 0.96 66.4 4.8 0.8 0.98 6.5 5.44 0.84 58.7 6.9 0.87 880 7.4 4.6 0.85 69.8 4.8 0.88 66 5.47 0.9 6.9 6. 0.94 90 7. 4.4 0.58 0.7 0.85 67. 4.8 0.59 0.7 0.87 6. 5.45 0.59 0.75 0.9 58.7 6. 0.6 0.77 0.9 67 F 400 74.6 4.7 0.6 0.78 0.9 70.5 4.8 0.6 0.8 0.95 66 5.47 0.64 0.8 0.98 6. 6. 0.65 0.85 880 77 4.9 0.65 0.84 0.99 7.6 4.85 0.67 0.86 68. 5.49 0.68 0.88 6. 6. 0.7 0.9 90 75.5 4.7 0.44 0.57 0.7 7.5 4.8 0.44 0.58 0.7 67. 5.47 0.44 0.58 0.7 6.5 6. 0.4 0.59 0.75 7 F 400 79 4. 0.45 0.6 0.75 74.6 4.87 0.45 0.6 0.77 70. 5.5 0.45 0.6 0.8 65. 6.5 0.46 0.64 0.8 880 8.5 4. 0.47 0.64 0.8 77. 4.89 0.47 0.66 0.8 7. 5.5 0.47 0.67 0.86 67. 6.5 0.48 0.69 0.89 6 TON HEATING STANDARD EFFICIENCY KHB074S4 Indoor Coil Air Volume 70 F Dry Bulb Total Heating Capacity Air Temperature Entering Outdoor Coil 65 F 45 F 5 F 5 F -5 F Comp. Total Comp. Total Comp. Total Comp. Total Motor Input Heating Motor Input Heating Motor Input Heating Motor Input Heating Input Capacity Input Capacity Input Capacity Input Capacity Comp. Motor Input Input kbtuh kw kbtuh kw kbtuh kw kbtuh kw kbtuh kw 90 84. 5. 68. 4.85 5. 4.49 4.9.99 7.0.00 400 85.8 4.86 69.6 4.5 5.6 4.5 6.4.65 8.5.66 880 86.9 4.65 70.7 4.9 54.7.94 7.5.4 9.6.44 K-Series Packaged Heat Pump to 6 Tons / Page 9

COOLING / HEATING RATINGS - KHA NOTE For Temperatures and Capacities not shown in tables, see bulletin Cooling Unit Rating Table Correction Factor Data in Miscellaneous Engineering Data section. TON COOLING STANDARD EFFICIENCY KHA06S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 960 5.4.5 0.7 0.85 0.99.56 0.7 0.87 0.4.9 0.7 0.9 7.7. 0.75 0.94 6 F 00 7.7.7 0.76 0.9 5.57 0.78 0.96..9 0.8 0.99 9.6. 0.8 440 9..8 0.8 6.9.58 0.84 4..9 0.87.6. 0.9 960 7.9.7 0.55 0.68 0.8 5.4.57 0.55 0.69 0.8.7.9 0.55 0.7 0.86 9.7. 0.55 0.7 0.9 67 F 00 9.9.8 0.58 0.74 0.9 7..58 0.59 0.76 0.9 4.4.9 0.59 0.77 0.96.. 0.6 0.8 0.99 440 4.4.9 0.6 0.8 0.97 8.7.59 0.6 0.8 5.8.94 0.64 0.84.6.4 0.65 0.88 960 40..8 0.4 0.54 0.66 7.7.58 0.4 0.54 0.67 4.9.9 0.9 0.54 0.68. 0.9 0.55 0.7 7 F 00 4.4. 0.4 0.57 0.7 9.7.6 0.4 0.58 0.7 6.8.95 0.4 0.59 0.75.6.4 0.4 0.6 0.78 440 44. 0.44 0.6 0.77 4..6 0.44 0.6 0.79 8..96 0.4 0.6 0.8 4.7.5 0.4 0.65 0.86 TON HEATING STANDARD EFFICIENCY KHA06S4 Indoor Coil Air Volume 70 F Dry Bulb Total Heating Capacity Air Temperature Entering Outdoor Coil 65 F 45 F 5 F 5 F -5 F Comp. Total Comp. Total Comp. Total Comp. Total Motor Input Heating Motor Input Heating Motor Input Heating Motor Input Heating Input Capacity Input Capacity Input Capacity Input Capacity Comp. Motor Input Input kbtuh kw kbtuh kw kbtuh kw kbtuh kw kbtuh kw 960 44..6.6.44..6 5.7.05 7.70.54 00 45..45 4.6.7..09 6.7.88 8.70.7 440 46..4 5.4.7 4.98 7.5.77 9.50.6 4 TON COOLING STANDARD EFFICIENCY KHA048S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 80 46.9.08 0.7 0.86 4..5 0.7 0.88 9..97 0.7 0.9 5. 4.5 0.74 0.95 6 F 600 49.9. 0.77 0.94 45.9.5 0.78 0.97 4.7.99 0.8 7.7 4.5 0.8 90 5.. 0.8 48.4.54 0.85 44.4 4.0 0.88 40.4 4.55 0.9 80 50.5. 0.55 0.69 0.8 46.4.5 0.54 0.69 0.85 4..99 0.54 0.7 0.87 7.9 4.5 0.5 0.7 0.9 67 F 600 5.. 0.59 0.75 0.9 49.54 0.58 0.76 0.94 44.6 4.0 0.59 0.79 0.97 40. 4.55 0.59 0.8 90 55.. 0.6 0.8 0.98 5.56 0.6 0.8 46.5 4.0 0.6 0.85 4.8 4.57 0.64 0.89 80 5.9. 0.4 0.54 0.67 49.8.55 0.9 0.5 0.67 45.6 4.0 0.8 0.5 0.69 4 4.55 0.6 0.5 0.7 7 F 600 56.9. 0.4 0.58 0.7 5.5.56 0.4 0.58 0.74 48. 4.04 0.4 0.59 0.76 4. 4.58 0.9 0.59 0.79 90 59.. 0.44 0.6 0.79 54.5.58 0.4 0.6 0.8 49.8 4.05 0.4 0.6 0.8 44.7 4.59 0.4 0.64 0.87 4 TON HEATING STANDARD EFFICIENCY KHA048S4 Indoor Coil Air Volume 70 F Dry Bulb Total Heating Capacity Air Temperature Entering Outdoor Coil 65 F 45 F 5 F 5 F -5 F Comp. Total Comp. Total Comp. Total Comp. Total Motor Input Heating Motor Input Heating Motor Input Heating Motor Input Heating Input Capacity Input Capacity Input Capacity Input Capacity Comp. Motor Input Input kbtuh kw kbtuh kw kbtuh kw kbtuh kw kbtuh kw 80 58.0.58 44..0 9..00.4.69 0.50.0 600 59..6 45..08 0.4.78.5.47.60.80 90 60.. 46..95.4.65.5.4.60.67 K-Series Packaged Heat Pump to 6 Tons / Page 0

COOLING / HEATING RATINGS - KHA NOTE For Temperatures and Capacities not shown in tables, see bulletin Cooling Unit Rating Table Correction Factor Data in Miscellaneous Engineering Data section. 5 TON COOLING STANDARD EFFICIENCY KHA060S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 600 58.6.65 0.7 0.85 0.99 5.9 4. 0.7 0.87 49 4.67 0.7 0.9 4.7 5.9 0.74 0.94 6 F 000 6.4.68 0.76 0.9 57.4 4.5 0.77 0.96 5. 4.69 0.8 0.99 47 5. 0.8 400 65.4.7 0.8 60.5 4.8 0.84 55.7 4.7 0.87 50.4 5.5 0.9 600 6..68 0.54 0.68 0.8 58. 4.6 0.54 0.69 0.8 5. 4.7 0.5 0.7 0.86 47.4 5. 0.5 0.7 0.9 67 F 000 66.8.7 0.58 0.74 0.9 6.5 4.9 0.58 0.75 0.9 56. 4.7 0.58 0.77 0.96 50. 5.5 0.59 0.8 400 69.4.7 0.6 0.8 0.97 6.9 4. 0.6 0.8 58. 4.75 0.6 0.84 5. 5.7 0.64 0.88 600 67.8.7 0.4 0.5 0.66 6.6 4.9 0.9 0.5 0.67 57. 4.74 0.7 0.5 0.68 5.4 5.6 0.5 0.5 0.7 7 F 000 7.5.75 0.4 0.57 0.7 66 4. 0.4 0.57 0.7 60. 4.76 0.4 0.58 0.75 54. 5.9 0.8 0.59 0.78 400 74..78 0.44 0.6 0.78 68.4 4.5 0.4 0.6 0.8 6.4 4.79 0.4 0.6 0.8 55.9 5.4 0.4 0.64 0.86 5 TON HEATING STANDARD EFFICIENCY KHA060S4 Indoor Coil Air Volume 70 F Dry Bulb Total Heating Capacity Air Temperature Entering Outdoor Coil 65 F 45 F 5 F 5 F -5 F Comp. Total Comp. Total Comp. Total Comp. Total Motor Input Heating Motor Input Heating Motor Input Heating Motor Input Heating Input Capacity Input Capacity Input Capacity Input Capacity Comp. Motor Input Input kbtuh kw kbtuh kw kbtuh kw kbtuh kw kbtuh kw 600 74.6 4.9 56.5.9 7.4.65 5.7.4.70.4 000 76.0.9 57.9.65 8.8.8 7..97 4.0.6 400 77.5.75 59.4.48 40.. 8.6.80 5.60.99 6 TON COOLING STANDARD EFFICIENCY KHA07S4 Outdoor Air Temperature Entering Outdoor Coil Entering Total 85 F 95 F 05 F 5 F Wet Air Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Total Comp. Sensible To Total Bulb Volume Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Cool Motor Ratio (S/T) Temperature Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb Cap. Input Dry Bulb kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F kbtuh kw 75 F 80 F 85 F 90 69. 4.5 0.69 0.85 64.7 5.0 0.7 0.87 59.9 5.59 0.7 0.9 54.6 6. 0.74 0.95 6 F 400 7. 4.5 0.74 0.94 68.5 5.0 0.76 0.97 6.8 5.59 0.79 58.7 6. 0.8 880 76.8 4.5 0.8 7.5 5.0 0.8 67.8 5.59 0.87 6.6 6. 0.9 90 74. 4.5 0.5 0.67 0.8 69.5 5.0 0.54 0.68 0.8 64.5 5.59 0.54 0.69 0.86 58.9 6. 0.54 0.7 0.9 67 F 400 78. 4.5 0.57 0.7 0.9 7. 5.0 0.58 0.74 0.94 67.8 5.59 0.58 0.76 0.97 6. 6. 0.59 0.79 880 8. 4.54 0.6 0.79 0.98 76. 5.0 0.6 0.8 70.4 5.59 0.6 0.84 64. 6. 0.64 0.88 90 79.6 4.54 0.4 0.5 0.64 74.6 5.0 0.9 0.5 0.65 69. 5.59 0.8 0.5 0.67 6.5 6. 0.8 0.5 0.69 7 F 400 8.4 4.54 0.4 0.56 0.7 78. 5.0 0.4 0.56 0.7 7.7 5.59 0.4 0.57 0.74 66.7 6. 0.4 0.59 0.77 880 86.4 4.55 0.4 0.6 0.76 8. 5.04 0.4 0.6 0.78 75. 5.6 0.4 0.6 0.8 69 6. 0.4 0.6 0.85 6 TON HEATING STANDARD EFFICIENCY KHA07S4 Indoor Coil Air Volume 70 F Dry Bulb Total Heating Capacity Air Temperature Entering Outdoor Coil 65 F 45 F 5 F 5 F -5 F Comp. Total Comp. Total Comp. Total Comp. Total Motor Input Heating Motor Input Heating Motor Input Heating Motor Input Heating Input Capacity Input Capacity Input Capacity Input Capacity Comp. Motor Input Input kbtuh kw kbtuh kw kbtuh kw kbtuh kw kbtuh kw 90 87.4 5.55 66.5 4.89 45. 4.8 7.8.70.50.8 400 89.7 5.5 68.9 4.59 47.7.88 0..40 5.80.5 880 9. 5.07 70.5 4.4 49..70.7. 7.40. K-Series Packaged Heat Pump to 6 Tons / Page

BLOWER DATA - DIRECT DRIVE - KHB04-00 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (economizer, wet coil, etc.) See page 4. - Any field installed accessories air resistance (electric heat, duct resistance, diffuser, etc.) See page 4. External Static Pressure (in. w.g.) Air Volume () at Various Blower Speeds 08 VOLTS 0 VOLTS High Medium Low High Medium Low and.5 Ton Standard Efficiency (Downflow) KHB04S and KHB00S 0.0 99 98 88 79 085 877 0. 9 96 8 409 086 87 0. 06 98 78 67 094 850 0. 8 88 74 50 047 80 0.4 59 84 686 009 78 0.5 6 8 64 8 98 76 0.6 0 766 569 4 9 705 0.7 046 78 496 95 888 65 0.8 95 648 4 4 79 58 0.9 909 584 5 07 78 49.0 78 465 47 96 59 4 and.5 Ton Standard Efficiency (Horizontal) KHB04S and KHB00S 0.0 5 909 80 5 06 88 0. 5 89 770 048 86 0. 6 866 74 88 0 798 0. 04 86 697 60 98 77 0.4 07 787 64 94 74 0.5 04 747 589 75 90 698 0.6 009 707 54 7 850 66 0.7 946 654 467 08 797 588 0.8 86 588 96 04 78 55 0.9 798 508 9 9 64 468.0 75 44 7 846 564 94 K-Series Packaged Heat Pump to 6 Tons / Page

BLOWER DATA - DIRECT DRIVE - KHA/KHB06, KHA048 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (economizer, wet coil, etc.) See page 4. - Any field installed accessories air resistance (electric heat, duct resistance, diffuser, etc.) See page 4. External Static Pressure (in. w.g.) Air Volume () at Various Blower Speeds 08 VOLTS 0 VOLTS 460/575 VOLTS High Medium Low High Medium Low High Medium Low and 4 Ton Standard Efficiency (Downflow) KHA/KHB06S and KHA048S 0.0 98 55 9 67 77 7 6 76 0. 99 586 8 67 780 5 04 78 08 0. 95 59 7 00 79 07 05 684 97 0. 865 56 08 04 75 66 994 647 7 0.4 8 495 0 986 678 04 98 597 4 0.5 76 444 976 909 6 64 86 54 096 0.6 694 9 899 84 55 08 765 485 059 0.7 609 87 78 478 000 689 40 996 0.8 47 0 70 60 64 98 6 5 90 0.9 68 066 5 488 50 755 498 5 848.0 08 869 40 59 0 640 45 06 76 and 4 Ton Standard Efficiency (Horizontal) KHA/KHB06S and KHA048S 0.0 86 50 070 08 76 59 085 745 47 0. 867 50 069 0 77 46 070 744 57 0. 804 485 067 978 67 7 06 690 5 0. 74 440 08 907 67 90 944 64 9 0.4 677 96 968 87 567 8 890 596 60 0.5 64 9 894 749 49 066 800 5 0.6 550 84 844 660 47 06 77 455 06 0.7 455 95 769 554 7 94 655 77 996 0.8 9 06 670 448 7 84 5 8 865 0.9 0 97 496 07 087 78 40 90 784.0 0 88 85 50 97 6 00 670 K-Series Packaged Heat Pump to 6 Tons / Page

BLOWER DATA - DIRECT DRIVE - KHB048 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (economizer, wet coil, etc.) See page 4. - Any field installed accessories air resistance (electric heat, duct resistance, diffuser, etc.) See page 4. External Static Pressure (in. w.g.) Air Volume () at Various Blower Speeds 08 VOLTS 0 VOLTS 460/575 VOLTS High Medium Low High Medium Low High Medium Low 4 Ton Standard Efficiency (Downflow) KHB048S 0.0 95 54 098 9 54 7 9 54 7 0. 98 56 08 05 56 6 05 56 6 0. 877 508 06 054 508 8 054 508 8 0. 84 448 06 986 448 96 986 448 96 0.4 75 407 990 98 407 54 98 407 54 0.5 689 47 96 86 47 099 86 47 099 0.6 605 86 864 75 86 04 75 86 04 0.7 500 06 774 644 06 9 644 06 9 0.8 75 085 - - - 46 085 - - - 46 085 - - - 0.9 0 - - - - - - - - - - - - - - - - - - - - - - - -.0 - - - - - - - - - - - - - - - - - - - - - - - - - - - 4 Ton Standard Efficiency (Horizontal) KHB048S 0.0 90 506 079 07 78 49 07 78 49 0. 855 478 069 06 686 8 06 686 8 0. 800 458 049 969 644 06 969 644 06 0. 744 96 0 908 60 6 908 60 6 0.4 687 46 96 847 50 5 847 50 5 0.5 60 96 886 755 460 047 755 460 047 0.6 546 8 66 40 00 66 40 00 0.7 46 47 75 57 90 90 57 90 90 0.8 47 07 660 49 05 80 49 05 80 0.9 78 874 560 96 006 68 96 006 68.0 954 64 58 9 - - - 496 9 - - - 496 K-Series Packaged Heat Pump to 6 Tons / Page 4

BLOWER DATA - BELT DRIVE - KHA/KHB06 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (economizer, wet coil, etc.). - Any field installed accessories air resistance (duct resistance, diffuser, etc.). See page for blower motors and drives and page 4 for wet coil and options/accessory air resistance data. DOWNFLOW Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A0 900 486 0. 554 0.6 6 0.0 695 0. 767 0. 86 0.5 897 0.8 95 0.0 000 508 0.5 576 0.9 64 0. 7 0.4 78 0.6 848 0.8 907 0.0 96 0. 00 5 0.8 599 0. 665 0.5 7 0.7 800 0.8 86 0. 99 0.4 97 0.6 00 560 0. 65 0.5 689 0.8 755 0.0 80 0. 879 0.4 9 0.7 98 0.40 00 59 0.4 654 0.8 76 0. 779 0. 84 0.5 897 0.8 948 0.4 996 0.44 400 6 0.6 690 0.0 748 0.4 807 0.6 864 0.9 96 0.4 964 0.46 0 0.49 500 676 0.8 79 0. 78 0.6 85 0.40 887 0.4 95 0.47 98 0.50 08 0.54 Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A0 Kit A05 900 004 0. 055 0.5 06 0.7 5 0.40 9 0.4 0.46 69 0.49 05 0.5 000 0 0.6 06 0.8 0.4 57 0.4 99 0.47 8 0.50 76 0.5 0.56 00 00 0.9 070 0.4 8 0.44 6 0.47 06 0.5 45 0.54 8 0.58 8 0.6 00 0 0.4 079 0.45 7 0.48 7 0.5 0.55 5 0.59 89 0.6 4 0.66 00 044 0.47 09 0.49 7 0.5 8 0.56 0.60 59 0.64 96 0.68 0 0.7 400 058 0.5 05 0.54 50 0.57 9 0.6 0.65 68 0.69 0 0.7 7 0.77 500 074 0.56 0 0.59 6 0.6 0 0.67 4 0.7 77 0.75 0.79 45 0.8 HORIZONTAL Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A0 900 485 0. 554 0.4 67 0.6 70 0.8 780 0. 84 0. 888 0.7 95 0.0 000 509 0. 578 0.6 649 0.9 7 0. 796 0. 854 0.6 900 0.9 947 0. 00 57 0.6 605 0.9 674 0. 744 0.4 8 0.6 868 0.9 9 0. 959 0.6 00 567 0.9 6 0. 700 0.4 768 0.7 8 0.0 884 0. 98 0.7 974 0.40 00 599 0. 664 0.5 79 0.8 79 0.0 85 0. 90 0.7 945 0.4 990 0.44 400 64 0.6 697 0.9 758 0. 89 0.4 875 0.8 9 0.4 964 0.46 008 0.49 500 669 0.0 70 0. 789 0.6 846 0.9 897 0.4 94 0.47 98 0.5 08 0.54 Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A0 Kit A05 900 986 0. 09 0.5 090 0.7 7 0.40 77 0.4 4 0.46 48 0.49 80 0.5 000 997 0.5 048 0.8 098 0.4 4 0.44 84 0.47 0.50 55 0.5 87 0.56 00 008 0.9 059 0.4 07 0.44 50 0.47 9 0.5 8 0.54 6 0.57 95 0.60 00 0 0.4 07 0.45 7 0.48 60 0.5 00 0.55 7 0.59 7 0.6 0 0.66 00 07 0.47 085 0.50 0 0.5 7 0.57 0 0.60 46 0.64 80 0.68 0.7 400 054 0.5 00 0.54 44 0.58 8 0.6 0.66 56 0.70 90 0.7 0.77 500 07 0.57 7 0.60 59 0.64 97 0.67 4 0.7 68 0.75 0 0.79 0.8 K-Series Packaged Heat Pump to 6 Tons / Page 5

BLOWER DATA - BELT DRIVE - KHA048 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (economizer, wet coil, etc.). - Any field installed accessories air resistance (duct resistance, diffuser, etc.). See page for blower motors and drives and page 4 for wet coil and options/accessory air resistance data. DOWNFLOW Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A0 00 560 0. 65 0.5 689 0.8 755 0.0 80 0. 879 0.4 9 0.7 98 0.40 00 59 0.4 654 0.8 76 0. 779 0. 84 0.5 897 0.8 948 0.4 996 0.44 400 6 0.6 690 0.0 748 0.4 807 0.6 864 0.9 96 0.4 964 0.46 0 0.49 500 675 0.8 79 0. 78 0.6 85 0.40 887 0.4 95 0.47 98 0.50 08 0.54 600 78 0. 766 0.5 84 0.40 86 0.44 90 0.48 955 0.5 000 0.55 046 0.59 700 756 0.4 799 0.9 84 0.44 887 0.49 9 0.5 976 0.57 00 0.6 066 0.64 800 787 0.40 88 0.45 870 0.50 9 0.55 955 0.59 999 0.6 04 0.67 089 0.70 900 85 0.46 855 0.5 897 0.57 99 0.6 98 0.66 04 0.69 068 0.7 0.76 000 84 0.5 884 0.59 95 0.64 968 0.68 009 0.7 05 0.76 095 0.79 8 0.8 Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A0 Kit A06 00 0 0.4 079 0.45 7 0.48 7 0.5 0.55 5 0.59 89 0.6 4 0.66 00 044 0.47 09 0.49 7 0.5 8 0.56 0.60 59 0.64 96 0.68 0 0.7 400 058 0.5 05 0.54 50 0.57 9 0.6 0.65 68 0.69 0 0.7 7 0.77 500 074 0.56 0 0.59 6 0.6 0 0.67 4 0.7 77 0.75 0.79 45 0.8 600 09 0.6 7 0.65 78 0.68 6 0.7 5 0.76 88 0.80 0.84 54 0.88 700 0.67 55 0.70 9 0.75 0 0.79 65 0.8 99 0.87 0.9 64 0.95 800 0.7 74 0.77 09 0.8 44 0.85 78 0.90 0.94 4 0.98 75.0 900 56 0.80 9 0.84 6 0.89 60 0.9 9 0.97 5.0 56.06 88.0 000 78 0.87 0.9 4 0.97 75.0 07.06 9.0 70.4 40.8 HORIZONTAL Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A0 00 567 0.9 6 0. 700 0.4 768 0.7 8 0.0 884 0. 98 0.7 974 0.40 00 599 0. 664 0.5 79 0.8 79 0.0 85 0. 90 0.7 945 0.4 990 0.44 400 64 0.6 697 0.9 758 0. 89 0.4 875 0.8 9 0.4 964 0.46 008 0.49 500 669 0.0 70 0. 789 0.6 846 0.9 897 0.4 94 0.47 98 0.5 08 0.54 600 705 0.4 76 0.7 89 0.40 87 0.4 9 0.48 96 0.5 004 0.56 048 0.59 700 74 0.8 796 0.4 850 0.45 900 0.49 945 0.5 985 0.58 06 0.6 070 0.65 800 776 0.4 89 0.46 880 0.5 97 0.55 970 0.60 009 0.64 050 0.68 09 0.7 900 8 0.48 86 0.5 90 0.57 955 0.6 996 0.66 05 0.7 076 0.74 8 0.78 000 847 0.54 895 0.59 94 0.64 984 0.69 0 0.74 06 0.78 0 0.8 44 0.85 Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A0 Kit A06 00 0 0.4 07 0.45 7 0.48 60 0.5 00 0.55 7 0.59 7 0.6 0 0.66 00 07 0.47 085 0.50 0 0.5 7 0.57 0 0.60 46 0.64 80 0.68 0.7 400 054 0.5 00 0.54 44 0.58 8 0.6 0.66 56 0.70 90 0.7 0.77 500 07 0.57 7 0.60 59 0.64 97 0.67 4 0.7 68 0.75 0 0.79 0.8 600 09 0.6 6 0.66 75 0.70 0.74 47 0.78 8 0.8 0.86 44 0.90 700 4 0.68 55 0.7 9 0.76 7 0.80 6 0.85 95 0.89 7 0.9 58 0.97 800 6 0.75 75 0.79 0 0.8 45 0.88 78 0.9 0.97 4.0 7.05 900 59 0.8 97 0.86 9 0.9 6 0.97 96.0 8.06 59.0 90.4 000 8 0.90 8 0.95 49.0 8.06 4. 46.5 77.0 408.4 K-Series Packaged Heat Pump to 6 Tons / Page 6

BLOWER DATA - BELT DRIVE - KHB048 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (economizer, wet coil, etc.). - Any field installed accessories air resistance (duct resistance, diffuser, etc.). See page for blower motors and drives and page 4 for wet coil and options/accessory air resistance data. DOWNFLOW Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A0 00 57 0.8 584 0. 64 0.5 70 0.8 779 0.0 860 0.0 97 0. 97 0.4 00 550 0. 607 0.5 664 0.9 7 0. 797 0. 875 0.4 97 0.5 98 0.8 400 574 0.5 60 0.9 687 0. 744 0.5 87 0.7 890 0.8 949 0.9 99 0.4 500 60 0.8 659 0. 74 0.6 770 0.9 89 0.4 907 0.4 96 0.44 00 0.47 600 65 0.9 70 0. 754 0.7 806 0.4 867 0.4 97 0.45 976 0.48 04 0.5 700 708 0.0 754 0.4 800 0.8 846 0.4 898 0.46 949 0.49 99 0.5 08 0.57 800 764 0. 804 0.6 844 0.40 884 0.45 97 0.49 970 0.54 008 0.58 044 0.6 900 8 0.4 847 0.9 88 0.44 96 0.49 95 0.54 990 0.59 05 0.64 06 0.69 000 847 0.40 878 0.45 909 0.50 94 0.55 975 0.60 009 0.66 044 0.7 079 0.76 Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A0 Kit A06 00 008 0.8 047 0.4 089 0.46 0.49 80 0.5 4 0.56 6 0.60 - - - - - - 00 07 0.4 055 0.46 097 0.5 9 0.5 84 0.57 8 0.60 64 0.6 95 0.67 400 06 0.46 065 0.50 06 0.54 47 0.57 9 0.6 0.64 69 0.68 00 0.7 500 08 0.5 076 0.55 7 0.59 57 0.6 99 0.65 40 0.69 75 0.7 05 0.76 600 050 0.56 089 0.60 9 0.64 68 0.67 09 0.7 49 0.74 8 0.78 0.8 700 065 0.6 0 0.65 4 0.69 8 0.7 0.76 59 0.80 9 0.8 0 0.88 800 08 0.67 8 0.7 56 0.75 94 0.79 4 0.8 7 0.86 0 0.90 0 0.94 900 098 0.7 5 0.77 7 0.8 09 0.85 48 0.88 84 0.9 4 0.97 4.0 000 6 0.80 5 0.84 89 0.88 6 0.9 64 0.96 99.00 7.04 5.09 HORIZONTAL Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A0 00 58 0.7 58 0.0 64 0. 706 0.5 78 0.7 859 0.9 94 0. 974 0.4 00 556 0. 609 0.4 669 0.6 7 0.9 804 0. 877 0. 98 0.5 985 0.8 400 59 0.4 645 0.7 70 0.0 76 0. 80 0.5 898 0.7 95 0.9 997 0.4 500 64 0.6 69 0.9 746 0. 80 0.6 86 0.8 9 0.4 970 0.44 0 0.48 600 696 0.8 74 0. 79 0.5 84 0.9 894 0.4 945 0.45 988 0.49 07 0.5 700 750 0. 79 0.5 86 0.9 880 0.4 94 0.47 968 0.5 007 0.55 04 0.59 800 799 0.5 87 0.9 875 0.4 9 0.48 95 0.5 990 0.56 06 0.6 06 0.65 900 840 0.40 87 0.45 907 0.49 94 0.54 976 0.58 0 0.6 045 0.67 080 0.7 000 87 0.47 90 0.5 94 0.56 966 0.60 998 0.65 0 0.70 066 0.75 0 0.79 Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A0 Kit A06 00 04 0.8 05 0.4 09 0.45 5 0.48 76 0.5 7 0.54 57 0.58 96 0.6 00 0 0.4 06 0.46 0 0.50 4 0.5 84 0.56 4 0.59 6 0.6 0 0.66 400 05 0.47 07 0.5 0.54 5 0.57 9 0.6 0.64 7 0.67 09 0.7 500 048 0.5 086 0.56 5 0.59 64 0.6 04 0.66 4 0.69 80 0.7 7 0.77 600 06 0.57 00 0.6 9 0.65 78 0.68 6 0.7 54 0.75 9 0.79 6 0.8 700 079 0.6 6 0.67 54 0.7 9 0.74 0 0.78 67 0.8 0 0.85 7 0.89 800 097 0.69 0.7 7 0.77 09 0.80 46 0.84 8 0.88 5 0.9 49 0.96 900 6 0.76 5 0.80 89 0.84 6 0.87 6 0.9 96 0.95 9 0.99 6.0 000 6 0.8 7 0.87 08 0.9 45 0.94 80 0.99.0 44.07 75. K-Series Packaged Heat Pump to 6 Tons / Page 7

BLOWER DATA - BELT DRIVE - KHA/KHB060 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (economizer, wet coil, etc.). - Any field installed accessories air resistance (duct resistance, diffuser, etc.). See page for blower motors and drives and page 4 for wet coil and options/accessory air resistance data. DOWNFLOW Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A0 600 665 0.0 76 0.4 768 0.8 89 0.4 879 0.44 97 0.46 985 0.49 0 0.5 700 7 0. 768 0.5 84 0.9 860 0.4 90 0.47 959 0.50 00 0.54 07 0.58 800 779 0. 88 0.7 857 0.4 897 0.46 99 0.50 980 0.55 08 0.59 054 0.64 900 86 0.6 859 0.4 894 0.45 98 0.50 964 0.56 000 0.6 06 0.66 07 0.70 000 857 0.4 889 0.47 90 0.5 95 0.57 986 0.6 00 0.68 055 0.7 09 0.77 00 878 0.49 909 0.54 940 0.59 97 0.64 006 0.70 04 0.75 076 0.80 0.85 00 897 0.55 99 0.6 96 0.66 994 0.7 08 0.78 06 0.8 099 0.89 4 0.9 00 98 0.6 950 0.68 98 0.74 07 0.80 05 0.86 087 0.9 0.97 57.0 400 94 0.70 974 0.77 008 0.8 04 0.90 077 0.96.0 46.06 8. Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A0 Kit A07 600 059 0.57 098 0.6 8 0.65 77 0.68 8 0.7 57 0.75 90 0.79 9 0.8 700 074 0.6 0.66 5 0.70 90 0.74 0.77 68 0.80 99 0.84 8 0.89 800 09 0.68 9 0.7 67 0.76 05 0.80 44 0.8 80 0.87 0 0.9 8 0.95 900 09 0.75 46 0.79 8 0.8 0.86 60 0.90 94 0.94 0.98 49.0 000 8 0.8 64 0.86 0 0.89 9 0.9 76 0.97 0.0 6.06 6.0 00 48 0.89 85 0.9 0.97 58.0 94.05 5.09 5.4 76.9 00 70 0.97 06.0 4.05 77.09.4 4.8 65. 90.8 00 9.06 8.09 6.4 95.9 7.4 55.9 80. 406.7 400 6.5 50.9 8.4.0 4.6 7.40 96.44 4.48 HORIZONTAL Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A0 600 7 0.9 758 0. 807 0.6 855 0.9 906 0.4 955 0.46 997 0.50 05 0.54 700 766 0. 808 0.6 850 0.40 89 0.44 96 0.47 978 0.5 06 0.56 05 0.60 800 84 0.6 85 0.40 888 0.44 95 0.49 96 0.5 000 0.57 05 0.6 07 0.66 900 85 0.4 886 0.46 99 0.50 95 0.55 986 0.60 0 0.64 056 0.69 09 0.7 000 88 0.48 9 0.5 944 0.57 976 0.6 009 0.67 04 0.7 078 0.76 0.80 00 906 0.56 96 0.60 967 0.65 999 0.70 0 0.75 067 0.79 0 0.84 5 0.88 00 90 0.64 960 0.68 99 0.7 04 0.78 058 0.8 09 0.88 6 0.9 60 0.96 00 954 0.7 985 0.77 07 0.8 05 0.87 085 0.9 9 0.96 5.00 86.04 400 98 0.8 0 0.86 046 0.9 079 0.96.00 46.05 80.09. Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A0 Kit A07 600 07 0.58 09 0.6 47 0.66 86 0.69 5 0.7 6 0.76 99 0.80 4 0.8 700 088 0.64 6 0.68 64 0.7 0 0.75 40 0.78 76 0.8 0.86 45 0.90 800 07 0.70 4 0.74 8 0.78 9 0.8 56 0.85 9 0.89 4 0.9 57 0.97 900 6 0.77 6 0.8 00 0.85 7 0.88 7 0.9 06 0.96 9.00 7.04 000 48 0.84 8 0.88 0 0.9 57 0.96 9.00.04 54.08 85. 00 70 0.9 06 0.96 4.00 77.04 0.08 40. 7.7 40. 00 95.00 0.04 65.08 99. 0.8 59. 88.7 48. 00 0.08 54. 88.7 0. 50.8 78.4 406.8 45.4 400 45.8 78..8 4. 70.40 97.45 45.50 454.54 K-Series Packaged Heat Pump to 6 Tons / Page 8

BLOWER DATA - BELT DRIVE - DOWNFLOW - KHA07 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (economizer, wet coil, etc.). - Any field installed accessories air resistance (duct resistance, diffuser, etc.). See page for blower motors and drives and page 4 for wet coil and options/accessory air resistance data. Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A04 900 86 0.6 859 0.4 894 0.45 98 0.50 964 0.56 000 0.6 06 0.66 07 0.70 000 857 0.4 889 0.47 90 0.5 95 0.57 986 0.6 00 0.68 055 0.7 09 0.77 00 878 0.49 909 0.54 940 0.59 97 0.64 006 0.70 04 0.75 076 0.80 0.85 00 897 0.55 99 0.6 96 0.66 994 0.7 08 0.78 06 0.8 099 0.89 4 0.9 00 98 0.6 950 0.68 98 0.74 07 0.80 05 0.86 087 0.9 0.97 57.0 400 94 0.70 974 0.77 008 0.8 04 0.90 077 0.96.0 46.06 8. 500 966 0.79 000 0.86 04 0.9 068.00 0.06 7. 7.6 05.0 600 994 0.90 08 0.97 06.04 096.0 0.6 64. 97.6.0 700 0.0 057.08 09.5 5. 59.7 9. 5.7 58.4 800 05. 088..7 55. 88.9.4 5.48 86.5 900 085.6 9. 5.40 86.45 8.5 50.55 8.6.66 Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A04 Kit A08 900 09 0.75 46 0.79 8 0.8 0.86 60 0.90 94 0.94 0.98 49.0 000 8 0.8 64 0.86 0 0.89 9 0.9 76 0.97 0.0 6.06 6.0 00 48 0.89 85 0.9 0.97 58.0 94.05 5.09 5.4 76.9 00 70 0.97 06.0 4.05 77.09.4 4.8 65. 90.8 00 9.06 8.09 6.4 95.9 7.4 55.9 80. 406.7 400 6.5 50.9 8.4.0 4.6 7.40 96.44 4.48 500 40.4 7.9 0.6.4 60.48 88.5 44.55 44.58 600 65.4 96.40 4.47 5.54 8.60 408.64 44.67 460.70 700 9.46.5 47.60 74.67 40.7 49.76 455.79 48.8 800 7.58 46.66 7.74 99.80 46.85 45.89 477.9 50.95 900 4.7 7.80 97.88 44.95 450.99 475.0 500.05 56.08 K-Series Packaged Heat Pump to 6 Tons / Page 9

BLOWER DATA - BELT DRIVE - HORIZONTAL - KHA07 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (economizer, wet coil, etc.). - Any field installed accessories air resistance (duct resistance, diffuser, etc.). See page for blower motors and drives and page 4 for wet coil and options/accessory air resistance data. Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A04 900 85 0.4 886 0.46 99 0.50 95 0.55 986 0.60 0 0.64 056 0.69 09 0.7 000 88 0.48 9 0.5 944 0.57 976 0.6 009 0.67 04 0.7 078 0.76 0.80 00 906 0.56 96 0.60 967 0.65 999 0.70 0 0.75 067 0.79 0 0.84 5 0.88 00 90 0.64 960 0.68 99 0.7 04 0.78 058 0.8 09 0.88 6 0.9 60 0.96 00 954 0.7 985 0.77 07 0.8 05 0.87 085 0.9 9 0.96 5.00 86.04 400 98 0.8 0 0.86 046 0.9 079 0.96.00 46.05 80.09. 500 00 0.9 04 0.96 075.00 09.05 4.09 75.4 07.8 9. 600 040.0 07.05 06.0 9.4 7.9 0. 5.8 66. 700 07.0 04.5 7.0 69.4 0.9.4 6.40 9.46 800 05. 7.5 68.0 00.5.40 6.46 9.5.59 900 8. 69.7 00.4.47 6.5 9.60.66 50.7 Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A04 Kit A08 900 6 0.77 6 0.8 00 0.85 7 0.88 7 0.9 06 0.96 9.00 7.04 000 48 0.84 8 0.88 0 0.9 57 0.96 9.00.04 54.08 85. 00 70 0.9 06 0.96 4.00 77.04 0.08 40. 7.7 40. 00 95.00 0.04 65.08 99. 0.8 59. 88.7 48. 00 0.08 54. 88.7 0. 50.8 78.4 406.8 45.4 400 45.8 78..8 4. 70.40 97.45 45.50 454.54 500 7.8 0. 4.9 6.45 9.5 48.57 446.6 474.66 600 97.9 8.45 57.5 85.58 4.64 49.70 467.74 495.78 700.5 5.58 8.65 409.7 45.77 46.8 490.86 57.90 800 5.65 80.7 407.78 44.85 460.90 486.95 5.99 54.0 900 79.79 407.86 44.9 460.98 485.04 5.08 58. 565.5 K-Series Packaged Heat Pump to 6 Tons / Page 0

BLOWER DATA - BELT DRIVE - DOWNFLOW - KHB074 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (economizer, wet coil, etc.). - Any field installed accessories air resistance (duct resistance, diffuser, etc.). See page for blower motors and drives and page 4 for wet coil and options/accessory air resistance data. Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A04 900 86 0.6 859 0.4 894 0.45 98 0.50 964 0.56 000 0.6 06 0.66 07 0.70 000 857 0.4 889 0.47 90 0.5 95 0.57 986 0.6 00 0.68 055 0.7 09 0.77 00 878 0.49 909 0.54 940 0.59 97 0.64 006 0.70 04 0.75 076 0.80 0.85 00 897 0.55 99 0.6 96 0.66 994 0.7 08 0.78 06 0.8 099 0.89 4 0.9 00 98 0.6 950 0.68 98 0.74 07 0.80 05 0.86 087 0.9 0.97 57.0 400 94 0.70 974 0.77 008 0.8 04 0.90 077 0.96.0 46.06 8. 500 966 0.79 000 0.86 04 0.9 068.00 0.06 7. 7.6 05.0 600 994 0.90 08 0.97 06.04 096.0 0.6 64. 97.6.0 700 0.0 057.08 09.5 5. 59.7 9. 5.7 58.4 800 05. 088..7 55. 88.9.4 5.48 86.5 900 085.6 9. 5.40 86.45 8.5 50.55 8.6.66 Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A04 Kit A08 900 09 0.75 46 0.79 8 0.8 0.86 60 0.90 94 0.94 0.98 49.0 000 8 0.8 64 0.86 0 0.89 9 0.9 76 0.97 0.0 6.06 6.0 00 48 0.89 85 0.9 0.97 58.0 94.05 5.09 5.4 76.9 00 70 0.97 06.0 4.05 77.09.4 4.8 65. 90.8 00 9.06 8.09 6.4 95.9 7.4 55.9 80. 406.7 400 6.5 50.9 8.4.0 4.6 7.40 96.44 4.48 500 40.4 7.9 0.6.4 60.48 88.5 44.55 44.58 600 65.4 96.40 4.47 5.54 8.60 408.64 44.67 460.70 700 9.46.5 47.60 74.67 40.7 49.76 455.79 48.8 800 7.58 46.66 7.74 99.80 46.85 45.89 477.9 50.95 900 4.7 7.80 97.88 44.95 450.99 475.0 500.05 56.08 K-Series Packaged Heat Pump to 6 Tons / Page

BLOWER DATA - BELT DRIVE - HORIZONTAL - KHB074 BLOWER TABLE INCLUDES RESISTANCE FOR BASE UNIT ONLY WITH DRY INDOOR COIL AND AIR FILTERS IN PLACE. FOR ALL UNITS ADD: - Any factory installed options air resistance (economizer, wet coil, etc.). - Any field installed accessories air resistance (duct resistance, diffuser, etc.). See page for blower motors and drives and page 4 for wet coil and options/accessory air resistance data. Air Volume External Static - in. w.g. 0.0 0.0 0.0 0.40 0.50 0.60 0.70 0.80 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Field Furnished Kit A04 900 85 0.4 886 0.46 99 0.50 95 0.55 986 0.60 0 0.64 056 0.69 09 0.7 000 88 0.48 9 0.5 944 0.57 976 0.6 009 0.67 04 0.7 078 0.76 0.80 00 906 0.56 96 0.60 967 0.65 999 0.70 0 0.75 067 0.79 0 0.84 5 0.88 00 90 0.64 960 0.68 99 0.7 04 0.78 058 0.8 09 0.88 6 0.9 60 0.96 00 954 0.7 985 0.77 07 0.8 05 0.87 085 0.9 9 0.96 5.00 86.04 400 98 0.8 0 0.86 046 0.9 079 0.96.00 46.05 80.09. 500 00 0.9 04 0.96 075.00 09.05 4.09 75.4 07.8 9. 600 040.0 07.05 06.0 9.4 7.9 0. 5.8 66. 700 07.0 04.5 7.0 69.4 0.9.4 6.40 9.46 800 05. 7.5 68.0 00.5.40 6.46 9.5.59 900 8. 69.7 00.4.47 6.5 9.60.66 50.7 Air Volume External Static - in. w.g. 0.90.00.0.0.0.40.50.60 RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP Kit A04 Kit A08 900 6 0.77 6 0.8 00 0.85 7 0.88 7 0.9 06 0.96 9.00 7.04 000 48 0.84 8 0.88 0 0.9 57 0.96 9.00.04 54.08 85. 00 70 0.9 06 0.96 4.00 77.04 0.08 40. 7.7 40. 00 95.00 0.04 65.08 99. 0.8 59. 88.7 48. 00 0.08 54. 88.7 0. 50.8 78.4 406.8 45.4 400 45.8 78..8 4. 70.40 97.45 45.50 454.54 500 7.8 0. 4.9 6.45 9.5 48.57 446.6 474.66 600 97.9 8.45 57.5 85.58 4.64 49.70 467.74 495.78 700.5 5.58 8.65 409.7 45.77 46.8 490.86 57.90 800 5.65 80.7 407.78 44.85 460.90 486.95 5.99 54.0 900 79.79 407.86 44.9 460.98 485.04 5.08 58. 565.5 K-Series Packaged Heat Pump to 6 Tons / Page

BLOWER DATA BELT DRIVE KIT SPECIFICATIONS - 06-074 Model No. OPTIONS / ACCESSORIES AIR RESISTANCE - in. w.g. Air Volume Motor HP No. of Drive Kits and RPM Range Nominal Speeds A0 A0 A0 A04 A05 A06 A07 A08 06 0.75 0.86 67-00 - - - - - - - - - 897-46 - - - - - - - - -.5 67-00 - - - - - - - - - 897-46 - - - - - - - - -.5.7 67-00 - - - - - - - - - 897-46 - - - - - - - - -. 67-00 - - - - - - - - - 897-46 - - - - - - - - - 048 0.75 0.86 - - - 745-7 - - - - - - - - - 07-49 - - - - - -.5 - - - 745-7 - - - - - - - - - 07-49 - - - - - -.5.7 - - - 745-7 - - - - - - - - - 07-49 - - - - - -. - - - 745-7 - - - - - - - - - 07-49 - - - - - - 060 0.75 0.86 - - - - - - 8-50 - - - - - - - - - -548 - - -.5 - - - - - - 8-50 - - - - - - - - - -548 - - -.5.7 - - - - - - 8-50 - - - - - - - - - -548 - - -. - - - - - - 8-50 - - - - - - - - - -548 - - - 07.5 - - - - - - - - - 968-40 - - - - - - - - - 9-59. - - - - - - - - - 968-40 - - - - - - - - - 9-59 074.5 - - - - - - - - - 968-40 - - - - - - - - - 9-59. - - - - - - - - - 968-40 - - - - - - - - - 9-59 NOTE - Using total air volume and system static pressure requirements determine from blower performance tables rpm and motor hp required. usable hp of motors furnished are shown. In Canada, nominal motor hp is also maximum usable motor hp. If motors of comparable hp are used, be sure to keep within the service factor limitations outlined on the motor nameplate. Wet Indoor Coil Electric Filters Economizer 04, 00, 06, 048 060, 07, 074 Heat MERV 8 MERV 800 0.0 0.0 0.04 0.0 0.04 0.05 000 0.0 0.0 0.04 0.0 0.04 0.07 00 0.0 0.0 0.04 0.06 0.04 0.07 400 0.0 0.0 0.04 0.09 0.04 0.07 600 0.04 0.0 0.04 0. 0.04 0.07 800 0.05 0.04 0.05 0.5 0.05 0.07 000 0.06 0.05 0.05 0.8 0.05 0.08 00 0.08 0.06 0.05 0.0 0.05 0.08 400 0.09 0.07 0.05 0. 0.05 0.08 600 0.0 0.08 0.06 0.4 0.05 0.08 800 0. 0.09 0.06 0.6 0.05 0.08 000 0. 0.0 0.06 0.8 0.05 0.08 K-Series Packaged Heat Pump to 6 Tons / Page

BLOWER DATA CEILING DIFFUSERS AIR RESISTANCE (in. w.g.) Air Volume RTD9-65 Step Down Diffuser FD9-65 RTD-95 Step-Down Diffuser FD-95 Ends Open Side & Ends Open All Ends & Sides Open Flush Diffuser Ends Open Side & Ends Open All Ends & Sides Open Flush Diffuser 800 0.5 0. 0. 0. - - - - - - - - - - - - 000 0.9 0.6 0.4 0.4 - - - - - - - - - - - - 00 0.5 0.0 0.7 0.7 - - - - - - - - - - - - 400 0. 0.6 0.0 0.0 - - - - - - - - - - - - 600 0.4 0. 0.0 0.4 - - - - - - - - - - - - 800 0.56 0.40 0.0 0.0 0. 0. 0.09 0.09 000 0.7 0.50 0.6 0.6 0.5 0. 0. 0.0 00 0.95 0.6 0.44 0.44 0.8 0.5 0. 0. 400 - - - - - - - - - - - - - 0. 0.8 0.5 0.4 600 - - - - - - - - - - - - - 0.4 0. 0.8 0.7 800 - - - - - - - - - - - - - 0.7 0.4 0. 0.0 000 - - - - - - - - - - - - - 0. 0.9 0.5 0.5 CEILING DIFFUSER AIR THROW DATA Air Volume - Effective Throw - ft. Model No. RTD9-65 FD9-65 800 0-7 4-8 000 0-7 5-0 00-8 6-400 - 9 7-4 600-0 8-5 800-0 - 8 000 4 - - 9 00 6-5 - 0 Model No. RTD-95 FD-95 600 4-9 9-4 800 5-0 0-8 000 7 - - 9 Effective throw based on terminal velocities of 75 ft. per minute. POWER EXHAUST FAN PERFORMANCE Return Air System Static Pressure - in. w.g. Air Volume Exhausted 0.00 000 0.05 990 0.0 94 0.5 80 0.0 664 0.5 507 0.0 50 0.5 0 K-Series Packaged Heat Pump to 6 Tons / Page 4

ELECTRICAL/ELECTRIC HEAT DATA - KHB DIRECT DRIVE BLOWER KHB04S KHB00S Voltage - 60hz 08/0V - Ph 08/0V - Ph Compressor Rated Load Amps 9.8.7 Outdoor Fan Motors () Locked Rotor Amps 47 64 Full Load Amps (total).7.7 Service Outlet 5V GFI (amps) 5 5 Indoor Blower Motor ELECTRIC HEAT DATA Horsepower 0.5 0.5 Type Direct Direct Full Load Amps.8.8 Unit Only 5 0 Unit Only 6 0 -.5 TON Electric Heat Voltage 08V 40V 08V 40V Electric Heat Electric Heat ELECTRICAL ACCESSORIES 5 kw 40 45 50 50 7.5 kw 50 60 60 60 0 kw 70 70 70 80 5 kw 9 4 4 46 7.5 kw 50 55 54 59 0 kw 6 68 65 7 Disconnect Standard Access - 0-0 kw 0W5 0W5 0W5 0W5 Hinged Access - 0-0 kw 0W 0W 0W 0W NOTE - All units have a minimum Short Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. HACR type breaker or fuse. Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. K-Series Packaged Heat Pump to 6 Tons / Page 5

ELECTRICAL/ELECTRIC HEAT DATA - KHB KHB06S - DIRECT DRIVE BOWER TON Voltage - 60hz 08/0V - Ph 08/0V - Ph 460V - Ph 575V - Ph Compressor Rated Load Amps 5. 8.7 4.6 Outdoor Fan Motors () () 0. HP Locked Rotor Amps 70 70 7 Full Load Amps (total).7.7. 0.7 Full Load Amps (total).4.4. Service Outlet 5V GFI (amps) 5 5 5 0 Indoor Blower Motor ELECTRIC HEAT DATA Horsepower 0.5 0.5 0.5 0.5 Type Direct Direct Direct Direct Full Load Amps.9.9 Unit Only 40 5 5 5 with () 0. HP 40 5 5 5 Unit Only 5 7 9 8 with () 0. HP 8 9 0 9 Electric Heat Voltage 08V 40V 08V 40V 480V 600V Electric Heat Electric Heat Electric Heat + Electric Heat + ELECTRICAL ACCESSORIES 7.5 kw 60 70 40 40 0 0 5 kw 00 0 60 70 5 0 7.5 kw 59 64 7 40 0 7 5 kw 9 0 56 6 6 7.5 kw 70 70 40 45 5 0 5 kw 00 0 60 70 5 0 7.5 kw 6 67 9 4 8 5 kw 95 06 58 64 7 Disconnect Standard Access - 0-7.5 kw 0W5 0W5 0W5 0W5 5 kw 0W6 0W5 0W5 0W5 Hinged Access - 0-7.5 kw 0W 0W 0W 0W NOTE - All units have a minimum Short Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. HACR type breaker or fuse. 5 kw 0W 0W 0W 0W Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. K-Series Packaged Heat Pump to 6 Tons / Page 6

ELECTRICAL/ELECTRIC HEAT DATA - KHB KHB048S - DIRECT DRIVE BOWER 4 TON Voltage - 60hz 08/0V - Ph 08/0V - Ph 460V - Ph 575V - Ph Compressor Rated Load Amps 0 5.5 4.7 Outdoor Fan Motors () () 0. HP Locked Rotor Amps 99 86 7 4 Full Load Amps (total).7.7. 0.7 Full Load Amps (total).4.4. Service Outlet 5V GFI (amps) 5 5 5 0 Indoor Blower Motor ELECTRIC HEAT DATA Horsepower 0.5 0.5 0.5 0.5 Type Direct Direct Direct Direct Full Load Amps.9.9 Unit Only 50 0 5 5 with () 0. HP 50 0 5 5 Unit Only 0 0 9 with () 0. HP 0 Electric Heat Voltage 08V 40V 08V 40V 480V 600V Electric Heat Electric Heat Electric Heat + Electric Heat + ELECTRICAL ACCESSORIES 7.5 kw 70 80 45 45 5 0 5 kw 00 0 60 70 5 0 7.5 kw 65 70 9 4 8 5 kw 99 09 59 65 7 7.5 kw 80 80 45 50 5 0 5 kw 0 5 70 70 5 0 7.5 kw 67 7 4 45 9 5 kw 0 6 67 4 8 Disconnect Standard Access - 0-7.5 kw 0W8 0W8 0W8 0W8 5 kw 0W9 0W8 0W8 0W8 Hinged Access - 0-7.5 kw 0W4 0W4 0W4 0W4 NOTE - All units have a minimum Short Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. HACR type breaker or fuse. 5 kw 0W5 0W4 0W4 0W4 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. K-Series Packaged Heat Pump to 6 Tons / Page 7

ELECTRICAL/ELECTRIC HEAT DATA - KHB KHB06S - BELT DRIVE BLOWER TON Voltage - 60hz 08/0V - Ph 08/0V - Ph 460V - Ph 575V - Ph Compressor Rated Load Amps 5. 8.7 4.6 Outdoor Fan Motors () () 0. HP Locked Rotor Amps 70 70 7 Full Load Amps (total).7.7. 0.7 Full Load Amps (total).4.4. Service Outlet 5V GFI (amps) 5 5 5 0 Indoor Blower Motor ELECTRIC HEAT DATA Horsepower 0.75.5 Type Belt Belt Belt Belt Belt Belt Belt Belt Full Load Amps 7.6 4.6 7.5..4.7.7 Unit Only 40 45 5 5 5 5 5 5 with () 0. HP 45 45 5 0 5 5 5 5 Unit Only 9 8 9 0 7 8 with () 0. HP 5 0 0 8 9 Electric Heat Voltage 08V 40V 08V 40V 08V 40V 08V 40V 480V 480V 600V 600V Electric Heat Electric Heat Electric Heat + Electric Heat + ELECTRICAL ACCESSORIES 7.5 kw 60 70 70 80 40 40 40 45 0 5 0 0 5 kw 00 0 00 0 60 70 60 70 5 5 5 0 7.5 kw 6 68 66 7 7 40 40 4 0 6 7 5 kw 97 07 00 0 57 6 60 66 5 6 7.5 kw 70 70 70 80 40 45 45 50 5 5 0 0 5 kw 00 0 0 5 60 70 70 70 5 5 0 0 7.5 kw 65 70 69 74 40 4 4 46 7 8 5 kw 99 09 0 59 65 6 68 4 6 7 Disconnect Standard Access - 0-7.5 kw 0W5 0W5 0W5 0W5 0W5 5 kw 0W6 0W5 0W5 0W5 0W5 Hinged Access - 0-7.5 kw 0W 0W 0W 0W 0W NOTE - All units have a minimum Short Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. HACR type breaker or fuse. 5 kw 0W 0W 0W 0W 0W Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. K-Series Packaged Heat Pump to 6 Tons / Page 8

ELECTRICAL/ELECTRIC HEAT DATA - KHB KHB048S - BELT DRIVE BLOWER 4 TON Voltage - 60hz 08/0V - Ph 08/0V - Ph 460V - Ph 575V - Ph Compressor Rated Load Amps 0 5.5 4.7 Outdoor Fan Motors () () 0. HP Locked Rotor Amps 99 86 7 4 Full Load Amps (total).7.7. 0.7 Full Load Amps (total).4.4. Service Outlet 5V GFI (amps) 5 5 5 0 Indoor Blower Motor ELECTRIC HEAT DATA Horsepower 0.75.5 Type Belt Belt Belt Belt Belt Belt Belt Belt Full Load Amps 7.6 4.6 7.5..4.7.7 Unit Only 50 50 0 0 5 5 5 5 with () 0. HP 50 60 0 5 5 5 5 5 Unit Only 5 8 9 0 with () 0. HP 7 4 6 0 Electric Heat Voltage 08V 40V 08V 40V 08V 40V 08V 40V 480V 480V 600V 600V Electric Heat Electric Heat Electric Heat + Electric Heat + ELECTRICAL ACCESSORIES 7.5 kw 80 80 80 80 45 45 45 50 5 5 0 0 5 kw 0 5 0 5 60 70 70 70 5 5 0 0 7.5 kw 69 74 7 77 40 4 4 46 8 9 5 kw 0 06 6 60 66 6 69 4 7 8 7.5 kw 80 80 80 90 45 50 50 50 5 5 0 0 5 kw 00 0 0 5 70 70 70 80 5 40 0 0 7.5 kw 7 76 74 80 4 46 45 48 4 9 0 5 kw 05 5 08 9 6 68 65 7 4 6 8 9 Disconnect Standard Access - 0-7.5 kw 0W8 0W8 0W8 0W8 0W8 5 kw 0W9 0W8 0W8 0W8 0W8 Hinged Access - 0-7.5 kw 0W4 0W4 0W4 0W4 0W4 NOTE - All units have a minimum Short Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. HACR type breaker or fuse. 5 kw 0W5 0W4 0W4 0W4 0W4 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. K-Series Packaged Heat Pump to 6 Tons / Page 9

ELECTRICAL/ELECTRIC HEAT DATA - KHB KHB060S - BELT DRIVE BLOWER 5 TON Voltage - 60hz 08/0V - Ph 08/0V - Ph 460V - Ph 575V - Ph Compressor Rated Load Amps..5 8 5 Outdoor Fan Motors () () 0. HP Locked Rotor Amps 5 09 59 40 Full Load Amps (total).4.4. Full Load Amps (total).4.4. Service Outlet 5V GFI (amps) 5 5 5 0 Indoor Blower Motor ELECTRIC HEAT DATA Horsepower 0.75.5 Type Belt Belt Belt Belt Belt Belt Belt Belt Full Load Amps 7.6 4.6 7.5..4.7.7 Unit Only 50 60 5 40 0 0 5 5 with () 0. HP 60 60 5 40 0 0 5 5 Unit Only 8 4 4 7 4 5 9 0 with () 0. HP 4 44 7 0 5 6 0 Electric Heat Voltage 08V 40V 08V 40V 08V 40V 08V 40V 480V 480V 600V 600V Electric Heat Electric Heat Electric Heat + Electric Heat + ELECTRICAL ACCESSORIES 7.5 kw 80 90 90 90 50 50 50 50 0 0 0 0 5 kw 0 5 0 5 70 70 70 80 40 40 0 0.5 kw 50 75 50 75 90 00 90 00 50 50 40 40 7.5 kw 7 77 75 8 44 47 47 50 5 6 8 9 5 kw 06 6 09 0 6 69 66 7 6 8 7 8.5 kw 40 55 4 59 8 9 86 95 48 49 7 8 7.5 kw 80 90 90 90 50 50 50 60 0 0 0 0 5 kw 0 5 5 5 70 80 70 80 40 40 0 0.5 kw 50 75 50 75 90 00 90 00 50 50 40 40 7.5 kw 74 80 78 8 46 49 49 5 6 8 9 0 5 kw 08 9 66 7 69 75 8 9 8 9.5 kw 4 58 45 6 85 94 88 97 49 50 8 9 Disconnect Standard Access - 0-7.5 kw 0W9 0W8 0W8 0W8 0W8 0W8 5 kw 0W9 0W9 0W8 0W8 0W8 0W8.5 kw 0W9 N/A 0W9 0W9 0W8 0W8 Hinged Access - 0-7.5 kw 0W5 0W4 0W4 0W4 0W4 0W4 NOTE - All units have a minimum Short Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. HACR type breaker or fuse. 5 kw 0W5 0W5 0W4 0W4 0W4 0W4.5 kw 0W5 N/A 0W5 0W5 0W4 0W4 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. K-Series Packaged Heat Pump to 6 Tons / Page 40

ELECTRICAL/ELECTRIC HEAT DATA- KHB KHB074S - BELT DRIVE BLOWER Voltage - 60hz 08/0V - Ph 460V - Ph 575V - Ph Compressor Rated Load Amps 7.6 8.5 6. Outdoor Fan Motor () 0. HP Locked Rotor Amps 6 66. 55. Full Load Amps.5. Full Load Amps.4. Service Outlet 5V GFI (amps) 5 5 0 Indoor Blower Motor ELECTRIC HEAT DATA 6 TON Horsepower Type Belt Belt Belt Belt Belt Belt Full Load Amps 4.6 7.5..4.7.7 Unit Only 45 50 0 0 5 5 With () 0. HP 45 50 0 5 5 5 Unit Only 0 5 6 With () 0. HP 5 6 7 Electric Heat Voltage 08 40 08 40 480 480 600 600 Unit+ Electric Heat Unit+ Electric Heat Unit+ Electric Heat and () 0. HP Unit+ Electric Heat and () 0. HP ELECTRICAL ACCESSORIES Disconnect Kit 7.5 kw 60 60 60 60 0 0 0 5 5 kw 70 80 80 80 40 40 0 0.5 kw 90 00 00 0 50 50 40 40 0 kw 0 5 5 5 60 70 50 50 7.5 kw 50 5 5 56 6 7 0 5 kw 69 75 7 78 7 9 9 0.5 kw 89 98 9 0 49 50 8 9 0 kw 08 0 60 6 47 48 7.5 kw 60 60 60 70 0 0 5 5 5 kw 80 80 80 90 40 40 0 5.5 kw 00 00 00 0 50 60 40 40 0 kw 5 5 5 50 70 70 50 50 7.5 kw 5 55 55 58 7 9 5 kw 7 78 74 8 9 40 0.5 kw 9 00 94 0 50 5 9 40 0 kw 4 6 6 6 48 49 Standard Access - 0-5 kw 0W8 0W8 0W8 0W8.5-0 kw 0W9 0W9 0W8 0W8 Hinged Access - 0-5 kw 0W4 0W4 0W4 0W4 NOTE - All units have a minimum Short Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. HACR type breaker or fuse..5-0 kw 0W5 0W5 0W4 0W4 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. K-Series Packaged Heat Pump to 6 Tons / Page 4

ELECTRICAL/ELECTRIC HEAT DATA - KHA KHA06S - DIRECT AND BELT DRIVE Voltage - 60hz 08/0V - Ph 460V - Ph 575V - Ph Compressor Rated Load Amps 0.4 5.8.8 Outdoor Fan Motors () () 0. HP Locked Rotor Amps 7 8 6.5 Full Load Amps (total).7. 0.7 Full Load Amps (total).4. Service Outlet 5V GFI (amps) 5 5 0 Indoor Blower Motor ELECTRIC HEAT DATA TON Horsepower 0.5 0.5 0.5 Type Direct Belt Belt Direct Belt Belt Direct Belt Belt Full Load Amps.9 4.6 7.5..4.7.7 Unit Only 5 5 0 5 5 5 5 5 5 with () 0. HP 0 0 5 5 5 5 5 5 5 Unit Only 9 0 8 8 9 with () 0. HP 5 4 9 9 0 Electric Heat Voltage 08V 40V 08V 40V 08V 40V 480V 480V 480V 600V 600V 600V Electric Heat Electric Heat Electric Heat + Electric Heat + ELECTRICAL ACCESSORIES 7.5 kw 40 45 45 45 45 50 5 5 5 0 0 0 5 kw 60 70 60 70 70 70 5 5 5 0 0 0 7.5 kw 9 4 9 4 4 45 4 7 7 8 5 kw 58 64 59 65 6 68 4 5 6 6 7 7.5 kw 45 45 45 50 50 50 5 5 5 0 0 0 5 kw 70 70 70 70 70 70 5 5 40 0 0 0 7.5 kw 4 44 4 45 45 48 4 5 8 8 9 5 kw 6 67 6 67 64 70 5 5 6 7 7 8 Disconnect Standard Access - 0-5 kw 0W5 0W5 0W5 0W5 0W5 Hinged Access - 0-5 kw 0W 0W 0W 0W 0W NOTE - All units have a minimum Short Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. HACR type breaker or fuse. Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. K-Series Packaged Heat Pump to 6 Tons / Page 4

ELECTRICAL/ELECTRIC HEAT DATA - KHA KHA048S - DIRECT AND BELT DRIVE Voltage - 60hz 08/0V - Ph 460V - Ph 575V - Ph Compressor Rated Load Amps.7 6. 4.8 Outdoor Fan Motors () () 0. HP Locked Rotor Amps 8. 4 Full Load Amps (total).7. 0.7 Full Load Amps (total).4. Service Outlet 5V GFI (amps) 5 5 0 Indoor Blower Motor ELECTRIC HEAT DATA 4 TON Horsepower 0.5 0.5 0.5 Type Direct Belt Belt Direct Belt Belt Direct Belt Belt Full Load Amps.9 4.6 7.5..4.7.7 Unit Only 5 5 40 5 5 5 5 5 5 with () 0. HP 5 5 40 5 5 5 5 5 5 Unit Only 4 7 9 9 0 with () 0. HP 6 6 9 4 0 0 Electric Heat Voltage 08V 40V 08V 40V 08V 40V 480V 480V 480V 600V 600V 600V Electric Heat Electric Heat Electric Heat + Electric Heat + ELECTRICAL ACCESSORIES 7.5 kw 50 50 50 50 50 50 5 5 5 0 0 0 5 kw 70 70 70 70 70 80 5 5 5 0 0 0 7.5 kw 4 46 4 46 46 49 4 8 8 9 5 kw 6 68 6 69 66 7 4 4 5 7 7 8 7.5 kw 50 50 50 50 50 60 5 5 5 0 0 0 5 kw 70 80 70 80 70 80 5 5 40 0 0 0 7.5 kw 45 48 46 49 49 5 4 4 5 9 9 0 5 kw 65 7 65 7 68 74 5 5 7 8 8 9 Disconnect Standard Access - 0-5 kw 0W5 0W5 0W5 0W5 0W5 Hinged Access - 0-5 kw 0W 0W 0W 0W 0W NOTE - All units have a minimum Short Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. HACR type breaker or fuse. Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. K-Series Packaged Heat Pump to 6 Tons / Page 4

ELECTRICAL/ELECTRIC HEAT DATA - KHA KHA060S - BELT DRIVE Voltage - 60hz 08/0V - Ph 460V - Ph 575V - Ph Compressor Rated Load Amps 5.6 7.8 5.8 Outdoor Fan Motors () () 0. HP Locked Rotor Amps 0 5 8.9 Full Load Amps (total).4. Full Load Amps (total).4. Service Outlet 5V GFI (amps) 5 5 0 Indoor Blower Motor ELECTRIC HEAT DATA 5 TON Horsepower Type Belt Belt Belt Belt Belt Belt Full Load Amps 4.6 7.5..4.7.7 Unit Only 40 45 0 0 5 5 with () 0. HP 40 45 0 0 5 5 Unit Only 7 0 4 5 0 with () 0. HP 9 5 6 Electric Heat Voltage 08V 40V 08V 40V 480V 480V 600V 600V Electric Heat Electric Heat Electric Heat + Electric Heat + ELECTRICAL ACCESSORIES 7.5 kw 50 60 60 60 5 0 0 0 5 kw 70 80 70 80 40 40 0 0.5 kw 90 00 90 00 50 50 40 40 7.5 kw 47 50 49 5 5 6 9 0 5 kw 66 7 69 75 6 8 8 9.5 kw 86 95 89 98 47 49 8 9 7.5 kw 60 60 60 60 0 0 0 5 5 kw 70 80 80 80 40 40 0 0.5 kw 90 00 00 00 50 50 40 40 7.5 kw 49 5 5 55 6 8 0 5 kw 68 75 7 77 8 9 9 0.5 kw 88 97 9 00 49 50 9 40 Disconnect Standard Access - 0-5 kw 0W8 0W8 0W8 0W8.5 kw 0W9 0W9 0W8 0W8 Hinged Access - 0-5 kw 0W4 0W4 0W4 0W4 NOTE - All units have a minimum Short Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. HACR type breaker or fuse..5 kw 0W5 0W5 0W4 0W4 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. K-Series Packaged Heat Pump to 6 Tons / Page 44

ELECTRICAL/ELECTRIC HEAT DATA- KHA KHA07S - BELT DRIVE BLOWER Voltage - 60hz 08/0V - Ph 460V - Ph 575V - Ph Compressor Rated Load Amps 9 9.7 7.4 Outdoor Fan Motor () 0. HP Locked Rotor Amps 6 50 Full Load Amps.5. Full Load Amps.4. Service Outlet 5V GFI (amps) 5 5 0 Indoor Blower Motor ELECTRIC HEAT DATA 6 TON Horsepower.5.5.5 Type Belt Belt Belt Belt Belt Belt Full Load Amps 6.6 7.5.4.4.7 Unit Only 50 50 5 5 0 0 With () 0. HP 50 50 5 5 0 0 Unit Only 4 5 7 8 4 With () 0. HP 6 7 8 9 4 5 Electric Heat Voltage 08 40 08 40 480 480 600 600 Unit+ Electric Heat Unit+ Electric Heat Unit+ Electric Heat and () 0. HP Unit+ Electric Heat and () 0. HP ELECTRICAL ACCESSORIES Disconnect Kit 7.5 kw 60 70 60 70 5 5 5 5 5 kw 80 80 80 80 40 40 5 5.5 kw 00 0 00 0 60 60 40 45 0 kw 5 5 5 5 70 70 50 50 7.5 kw 5 56 54 57 8 9 5 kw 7 79 74 80 40 40.5 kw 9 0 9 0 5 5 40 4 0 kw 4 5 6 6 49 50 7.5 kw 70 70 70 70 5 5 5 5 5 kw 80 90 80 90 45 45 5 5.5 kw 00 0 00 0 60 60 45 45 0 kw 5 50 5 50 70 70 50 60 7.5 kw 56 59 57 60 0 0 4 5 kw 75 8 76 8 4 4.5 kw 95 04 96 05 5 5 4 4 0 kw 4 6 5 7 64 64 50 5 Standard Access - 0-5 kw 0W8 0W8 0W8 0W8.5-0 kw 0W9 0W9 0W8 0W8 Hinged Access - 0-5 kw 0W4 0W4 0W4 0W4 NOTE - All units have a minimum Short Current Rating (SCCR) of 5000 amps. Extremes of operating range are plus and minus 0% of line voltage. HACR type breaker or fuse..5-0 kw 0W5 0W5 0W4 0W4 Refer to National or Canadian Electrical Code manual to determine wire, fuse and disconnect size requirements. K-Series Packaged Heat Pump to 6 Tons / Page 45

ELECTRIC HEAT CAPACITIES Input Voltage No of Stages 5 kw 7.5 kw 0 kw kw input Btuh Output No of Stages kw input Btuh Output No of Stages kw input Btuh Output 08.8,800 5.6 9,00 7.5 5,600 0 4. 4,00 6.,500 8.4 8,700 0 4.6 5,700 6.9,500 9.,400 40 5.0 7,00 7.5 5,600 0.0 4,00 440 - - - - - - - - - 6.,500 - - - - - - - - - 460 - - - - - - - - - 6.9,500 - - - - - - - - - 480 - - - - - - - - - 7.5 5,600 - - - - - - - - - 550 - - - - - - - - - 6.,500 - - - - - - - - - 575 - - - - - - - - - 6.9,500 - - - - - - - - - 600 - - - - - - - - - 7.5 5,600 - - - - - - - - - Input Voltage No of Stages 5 kw.5 kw 0 kw kw input Btuh Output No of Stages kw input Btuh Output No of Stages kw input Btuh Output 08. 8,400 6.9 57,700.5 76,800 0.6 4,000 8.9 64,500 5. 86,000 0.8 47,000 0.7 70,700 7.5 9,900 40 5.0 5,00.5 76,800 0.0 0,400 440.6 4,000 8.9 64,500 5. 86,000 460.8 47,000 0.7 70,700 7.5 9,900 480 5.0 5,00.5 76,800 0.0 0,400 550.6 4,000 8.9 64,500 5. 86,000 575.8 47,000 0.7 70,700 7.5 9,900 600 5.0 5,00.5 76,800 0.0 0,400 UNIT CLEARANCES - INCHES (MM) C OUTDOOR AIR HOOD B D A Unit Clearance K-Series Packaged Heat Pump to 6 Tons / Page 46 A B C D Top Clearance in. mm in. mm in. mm in. mm Service Clearance 6 94 6 94 6 94 6 94 Operation Clearance 6 94 6 94 6 94 6 94 NOTE - Entire perimeter of unit base requires support when elevated above the mounting surface. Service Clearance - Required for removal of serviceable parts. Operation Clearance - Required clearance for proper unit operation. Unobstructed

OUTDOOR SOUND DATA Unit Model No. Octave Band Linear Sound Power Levels dba, re 0 - Watts - Center Frequency - Hz 5 50 500 000 000 4000 8000 Sound Rating Number (SRN) (dba) KHA06 and 048 6 66 70 7 68 6 5 75 KHB04, 00, 06 6 67 7 69 66 6 56 75 KHB048 6 67 70 70 68 6 56 75 KHA060 67 7 77 76 7 68 6 8 KHB060 69 7 75 74 70 65 55 80 KHA07 67 75 78 78 75 68 59 8 Note - The octave sound power data does not include tonal corrections. Sound Rating Number according to ARI Standard 70-95 (includes pure tone penalty). SRN is the overall A-Weighted Sound Power Level, (LWA), dba (00 Hz to 0,000 Hz). K-Series Packaged Heat Pump to 6 Tons / Page 47

WEIGHT DATA Model Number Net Shipping Base Max. Base Max. lbs. kg lbs. kg lbs. kg lbs. kg KHB04S 566 57 664 0 607 75 705 0 KHB00S 566 57 664 0 607 75 705 0 KHA06S 55 4 647 9 595 70 76 5 KHB06S 566 57 664 0 607 75 705 0 KHA048S 557 5 669 0 67 80 78 5 KHB048S 64 9 767 48 68 09 808 67 KHA060S 667 0 770 49 77 0 84 8 KHB060S 686 79 59 77 0 8 78 KHA07S 750 40 86 9 80 67 9 4 KHB074S 750 40 86 9 80 67 9 4 Base Unit - The unit with NO OPTIONS. Max. Unit - The unit with ALL OPTIONS Installed (Economizer, etc.) OPTIONS / ACCESSORIES ECONOMIZER / OUTDOOR AIR / Exhaust Economizer lbs. Shipping Weights Economizer - Includes Barometric Relief Dampers and Exhaust Hood 59 Outdoor Air Dampers Motorized 5 Manual 8 9 Standard Static 5 6 ELECTRIC HEAT 5 kw 4 7.5 kw 4 0 kw 4 5 kw 4.5 kw 5 6 0 kw 5 6 ROOF CURBS Hybrid Roof Curbs, Downflow 8 in. height 50 4 in. height 70 8 in. height 80 6 4 in. height 00 45 Hybrid Curbs, Full Perimeter, Downflow 8 in. height 57 6 4 in. height 60 7 8 in. height 9 4 4 in. height 4 5 Adjustable Pitch Curb, Downflow 4 in. height 5 CEILING DIFFUSERS Step-Down RTD9-65 67 0 RTD-95 88 40 Flush FD9-65 7 7 kg FD-95 75 4 Transitions (Supply and Return) TTRAN0AN 0 TTRAN0N- 0 K-Series Packaged Heat Pump to 6 Tons / Page 48

DIMENSIONS - UNIT - INCHES (MM) - KHA Model No. CORNER WEIGHTS CENTER OF GRAVITY AA BB CC DD EE FF Base Max. Base Max. Base Max. Base Max. Base Max. Base Max. lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg in. mm in. mm in. mm in. mm 06 9 4 6 5 5 60 8 8 96 49 68 87 85 8-/ 978 40 06 8 457 8 457 048 96 44 0 55 7 5 6 6 88 86 9 00 55 7 94 88 8-/ 978 40 06 8 457 8 457 060 5 5 8 6 40 64 57 7 6 0 5 5 66 84 0 8-/ 978 40 06 8 457 8 457 07 60 7 85 84 80 8 08 94 06 69 07 94 9 08 46-/4 74 46-/4 74 0-/ 5 0-/ 5 Base Unit - The unit with standard heat exchanger NO OPTIONS. Max. Unit - The unit with ALL OPTIONS Installed (Economizer, etc.). 45 (4) 47 (94) BASE 5-5/8 (4) 9 (77) AA DD (79) 6-5/8 (68) 6-/ (67) 6-/4 (4) 7 (78) BOTTOM RETURN AIR OPENING BOTTOM SUPPLY AIR OPENING 8 (457) 5 (7) 0 (508) FF BOTTOM CONDENSATE OUTLET CENTER OF GRAVITY TOP VIEW (Base) 8-/4 (5) KHA06 thru 060 96-/4 (445) KHA07 5-/4 (654) KHA06 thru 060 8-/4 (984) KHA07 9-/ (4) EE BOTTOM POWER ENTRY X 8 (76 X 0) BB CC (5) 8-7/8 (987) KHA06 thru 048 46-7/8 (9) KHA060 / 07 5-/8 (899) KHA06 thru 048 4-/8 (0) KHA060 / 07 -/ (89) CONDENSATE OUTLET (EITHER SIDE) 5-/ (40) ELECTRICAL INLET (5) 47 (94) BASE END VIEW 6-/ (67) LIFTING HOLES (For rigging) 85-/4 (65) KHA06 thru 060 BASE 98-/4 (496) KHA07 BASE SIDE VIEW 9-/ (495) 8-/8 (467) (79) (5) 0 (508) 9 (77) FORKLIFT SLOTS (Front, Back and Blower End) 5-/ (40) BACK VIEW HORIZONTAL SUPPLY AIR OPENING HORIZONTAL RETURN AIR OPENING (Without Economizer) 5-/ (40) K-Series Packaged Heat Pump to 6 Tons / Page 49

DIMENSIONS - UNIT - INCHES (MM) - KHB Model CORNER WEIGHTS CENTER OF GRAVITY No. AA BB CC DD EE FF Base Max. Base Max. Base Max. Base Max. Base Max. Base Max. lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg lbs. kg in. mm in. mm in. mm in. mm 04 9 54 40 64 49 67 5 69 65 75 70 77 60 0 9 8 965 4-/4 -/4 565 -/4 565 00 9 54 40 64 49 67 5 69 65 75 70 77 60 0 9 8 965 4-/4 -/4 565 -/4 565 06 9 54 40 64 49 67 5 70 65 75 70 77 60 0 9 8 965 4-/4 -/4 565 -/4 565 048 8 58 5 69 59 7 77 80 97 89 9 09 58 7 98 90 8 965 9 99 5 0 508 060 7 6 58 7 70 77 75 79 0 95 6 07 69 77 0 8 965 4 04 5 0 508 074 60 7 85 84 80 8 08 94 06 69 07 94 9 08 46-/4 74 46-/4 74 0-/ 5 0-/ 5 Base Unit - The unit with standard heat exchanger NO OPTIONS. Max. Unit - The unit with ALL OPTIONS Installed (Economizer, etc.). 47 (94) BASE 5-5/8 (4) 9 (77) AA (79) 6-/4 (4) 7 (78) BOTTOM RETURN AIR OPENING BOTTOM SUPPLY AIR OPENING 8 (457) 5 (7) 0 (508) CENTER OF GRAVITY 5-/4 (654) BB 6-5/8 (68) FF 9-/ (4) DD 6-/ (67) BOTTOM CONDENSATE OUTLET TOP VIEW (Base) EE BOTTOM POWER ENTRY X 8 (76 X 0) CC 45 (4) 8-/4 (5) KHB04 thru 060 96-/4 (445) (KHB074) (5) 8-7/8 (987) KHB04 thru 06 46-7/8 (9) KHB048 thru 074 5-/8 (899) KHB04 thru 06 4-/8 (0) KHB048 thru 074 -/ (89) CONDENSATE OUTLET (EITHER SIDE) 5-/ (40) ELECTRICAL INLET (5) 47 (94) BASE END VIEW 6-/ (67) LIFTING HOLES (For rigging) 85-/4 (65) KHB04 thru 060 BASE 98-/4 (496) KHB074 BASE SIDE VIEW 9-/ (495) 8-/8 (467) (79) (5) 0 (508) 9 (77) K-Series Packaged Heat Pump to 6 Tons / Page 50 FORKLIFT SLOTS (Front, Back and Blower End) 5-/ (40) BACK VIEW HORIZONTAL SUPPLY AIR OPENING HORIZONTAL RETURN AIR OPENING (Without Economizer) 5-/ (40)

DIMENSIONS - ACCESSORIES - INCHES (MM) OUTDOOR AIR HOOD DETAIL FOR OPTIONAL ECONOMIZER AND BAROMETRIC RELIEF DAMPERS (Downflow Applications) -/4 (98) OPTIONAL OUTDOOR AIR HOOD (Furnished with Economizer) 7-/8 (44) OPTIONAL BAROMETRIC RELIEF HOOD (Furnished with Economizer ) SIDE VIEW OUTDOOR AIR HOOD FOR ECONOMIZER (Furnished) BAROMETRIC RELIEF HOOD FOR ECONOMIZER (Furnished) -/4 (98) 5 (889) 7-/8 (44) 5 (889) (0) 9-7/8 (505) OUTDOOR AIR DAMPER HOOD DETAIL FOR OPTIONAL MANUAL OR MOTORIZED OUTDOOR AIR DAMPERS (Downflow or Horizontal Applications) 0-/ (67) OPTIONAL OUTDOOR AIR DAMPERS AND PANEL OUTDOOR AIR DAMPER HOOD 5 (889) -/ (4) OUTDOOR AIR DAMPER HOOD (Furnished) SIDE VIEW 889 (5) 6-/ (49) 0-/ (67) K-Series Packaged Heat Pump to 6 Tons / Page 5

DIMENSIONS - ACCESSORIES - INCHES (MM) OUTDOOR AIR HOOD DETAIL WITH OPTIONAL ECONOMIZER AND BAROMETRIC RELIEF DAMPERS (Horizontal Applications) ECONOMIZER DAMPERS Barometric Relief Hood and Dampers SUPPLY AIR DUCT (Field Provided) SUPPLY AIR OUTLET TOP VIEW 9-/ (495) HORIZONTAL SUPPLY AIR OPENING RETURN AIR DUCT TRANSITION (Field fabricated and installed on unit) -/8 (797) This opening not used in Horizontal Applications with 0 Economizer (508) RETURN AIR INLET OUTDOOR AIR HOOD (Furnished with Economizer) -/4 (4) BAROMETRIC RELIEF HOOD (Furnished with Economizer and Field Installed on Field fabricated Return Air Duct) OUTDOOR AIR HORIZONTAL RETURN AIR OPENING RETURN AIR DUCT (Field Fabricated - Must be sized to accommodate Barometric Relief Hood and Return Air Requirements) BAROMETRIC RELIEF HOOD DIMENSIONS Width - 5-/ in. (90 mm) Height - in. (5 mm) See previous page for details. NOTE - Horizontal applications with Economizer require Horizontal Economizer Conversion Kit. See Options/Accessories table. EXHAUST AIR -/4 (57) 8-/4 (476) 7/8 () 0-7/6 (77) -/4 (57) BACK VIEW 5-/ (40) RETURN AIR DUCT TRANSITION (Field fabricated and installed on unit) RETURN AIR DUCT INLET (Field Fabricated - Must be sized to accommodate Barometric Relief Hood and Return Air Requirements) 7/8 () UNIT RETURN AIR DUCT OPENING WITH ECONOMIZER INSTALLED END VIEW NOTE - Return Air Duct and Transition must be supported. K-Series Packaged Heat Pump to 6 Tons / Page 5

DIMENSIONS - ACCESSORIES - INCHES (MM) HYBRID ROOF CURBS - DOUBLE DUCT OPENING - STANDARD AND FULL PERIMETER A B 8 (965) 4-/ (054) -5/8 () 5-/8 (84) 9-/8 (486) SUPPLY OPENING -/8 (57) 8 (0) 4 (56) 8 (457) 4 (60) -/4 (44) (8) RETURN OPENING NOTE - Roof deck may be omitted within confines of curb. TYPICAL FLASHING DETAIL FOR ROOF CURB DETAIL ROOF CURB BASE BOTTOM PACKAGED UNIT -/4 (44) / () FIBERGLASS INSULATION (Furnished) NAILER STRIP (Furnished) ROOF CURB (Extends around entire perimeter of unit) COUNTER FLASHING (Field Supplied) CANT STRIP (Field Supplied) ROOFING MATERIAL 8 (0) 4 (56) 8 (457) 4 (60) FACTORY INSTALLED PERIMETER WOOD NAILER STRIP RIGID INSULATION (Field Supplied) -/4 (44) Model No. A B in. mm in. mm Standard - 04, 00, 06, 048, 060, 07, 074 79-/4 06 76-/4 97 Full Perimeter - 07, 074 9-/4 56 89-/4 67 07 and 074 models can be used on smaller 79-/4 in. (06 mm) roof curbs (not full perimeter) with 5- /4 in. (400 mm) overhang at condenser end of unit. See dimension drawing on page 54. K-Series Packaged Heat Pump to 6 Tons / Page 5

DIMENSIONS - ACCESSORIES - INCHES (MM) ADJUSTABLE PITCH CURBS - DOUBLE DUCT OPENING 79-/4 (06) 76-/4 (97) 8 (965) 4-/ (054) 9-/8 (486) -/8 (57) 5-/8 (84) SUPPLY OPENING 4 (56) -5/8 () (8) RETURN OPENING FACTORY INSTALLED PERIMETER WOOD NAILER STRIP BOTTOM CURB ASSEMBLY NOTE - slope pitch is /4 in. per foot (9 mm per 05 mm) in any one direction. TYPICAL FLASHING DETAIL FOR ROOF CURB DETAIL ROOF CURB BASE BOTTOM PACKAGED UNIT -/4 (44) / () FIBERGLASS INSULATION (Furnished) NAILER STRIP (Furnished) ROOF CURB (Extends around entire perimeter of unit) COUNTER FLASHING (Field Supplied) CANT STRIP (Field Supplied) ROOFING MATERIAL 4 (56) FACTORY INSTALLED PERIMETER WOOD NAILER STRIP RIGID INSULATION (Field Supplied) -/4 (44) K-Series Packaged Heat Pump to 6 Tons / Page 54

DIMENSIONS - ACCESSORIES - INCHES (MM) 07 AND 074 MODELS - SHOWING OVERHANG ON SMALLER 79-/4 INCH LENGTH ROOF CURBS (Not Full Perimeter) -/4 (70) 79-/4 (06) SIDE VIEW ROOF CURB 5-/4 (400) TRANSITIONS TTRAN0AN- - FOR 8 INCH (457 MM) DUCT TTRAN0N- - FOR 0 INCH (508 MM) DUCT (05) -/ (800) 8 (0) -/ inch (8 mm) TTRAN0AN- inch (5mm) TTRAN0N- RETURN TRANSITION -5/8 () 9-/8 (486) (8) RETURN OPENING SUPPLY OPENING -/8 (57) TTRAN0AN- - FOR 8 INCH (457 MM) DUCT TTRAN0N- - FOR 0 INCH (508 MM) DUCT 8-/ (470) 0-/ (5) 8 (0) -/ inch (8 mm) TTRAN0AN- inch (5mm) TTRAN0N- SUPPLY TRANSITION K-Series Packaged Heat Pump to 6 Tons / Page 55

DIMENSIONS - ACCESSORIES - INCHES (MM) COMBINATION CEILING SUPPLY AND RETURN DIFFUSERS STEP-DOWN CEILING DIFFUSER FLUSH CEILING DIFFUSER E F G H H D E F G H H D G C G C (5) (5) L B J A B A K Model Number RTD9-65 RTD-95 A in. 47-5/8 47-5/8 mm 59 59 B in. -5/8 9-5/8 mm 600 75 C in. -/8 4-/8 mm 89 65 D in. -/ 7-/ mm 546 699 E in. 45-/ 45-/ mm 56 58 F in. -/ -/ mm 57 57 G in. -/ -/ mm 9 9 H in. 0-/4 -/4 mm 7 49 J in. 45-/ 45-/ mm 56 56 K in. -/ 7-/ mm 546 699 L in. 7-/8 8-/8 mm 8 06 Duct Size in. 8 round 0 round mm 457 round 508 round Model Number FD9-65 FD-95 A in. 47-5/8 47-5/8 mm 59 59 B in. -5/8 9-5/8 mm 600 75 C in. -/ 6-5/8 mm 4 4 D in. 7 mm 5 686 E in. 45 45 mm 4 4 F in. -/ -/ mm 57 57 G in. -/4 -/4 mm 86 86 H in. 0-/ -/ mm 67 4 Duct Size in. 8 round 0 round mm 457 round 508 round K-Series Packaged Heat Pump to 6 Tons / Page 56

REVISIONS Section Specifications Options/Accessories Description Revised Total Low Heating Capacity, Total Unit Power and COP specifications for KHB074S. Updated model and catalog numbers for the Low Ambient Kit (KHA/KHB). Visit us at www.allied-commercial.com For the latest technical information, visit us at www.allied-commercial.com Contact us at -800-448-587 NOTE - Due to Allied Commercial ongoing commitment to quality, Specifications, Ratings and Dimensions subject to change without notice and without incurring liability. Improper installation, adjustment, alteration, service or maintenance can cause property damage or personal injury. Installation and service must be performed by a qualified installer and servicing agency. 06 Allied Air Enterprises LLC, a Lennox International Inc. Company