Cogent Vertical Training The Cogent Training s are specifically designed for teaching labs and institutions. The vertical headwall provides Vacuum, Air and simulates Oxygen* just by plugging the unit into an electrical outlet. The Cogent provides an inexpensive and quick method for simulating a patient room s medical gas services. The vertical equipment track incorporated into the unit allow for space management and organization. The Cogent Training is designed to meet your needs. The traditional methods of providing medical gas service can cost thousands of dollars per bed with a centralized vacuum pump and air compressor and a network of piping. The Cogent was developed to provide vacuum, air and electrical power in a self contained unit that solves the med gas problems associated with lab renovations A solution that will save thousands of dollars over a traditional centralized system In a few hours you have a fully functional patient room simulation of working Oxygen*, Air and Vacuum service with hospital accurate flow rates and hospital grade receptacles Cogents can be added one at a time as your budget permits The Cogent can be moved with ease when lab spacing needs change The Cogent provides any lab, regardless of size, a cost effective replication of a patient room. The Cogent is only 5 deep by 21 wide and 36 high, which fits in almost any existing space. Special dimensions can be provided to suit your needs. Installation is simple: locate the Cogent in position near the bed, secure it to the building wall, plug in the six foot electric cord to an available outlet and you are up and running.
Standard Configurations Cogent Single Patient Training Cogent Semi-Private Patient Training Includes 1 Oxygen Outlet 1 Vacuum Outlet 1 Medical Air Outlet 1 Electrical Receptacle, Duplex, Red 1 Electrical Receptacle, Duplex, Ivory 1 Vacuum Pump 1 Air Compressor 1 Vacuum Bottle Slide 1 Timer Switch for Pump and Compressor Includes 2 Oxygen Outlet 2 Vacuum Outlet 2 Medical Air Outlet 2 Electrical Receptacle, Duplex, Red 2 Electrical Receptacle, Duplex, Ivory 2 Vacuum Pumps 1 Air Compressor 2 Vacuum Bottle Slide 1 Timer Switch for Pumps and Compressor Available Options Overbed Light Fixture [with pull cord switch] Integrated White Dry Erase Board Oxygen Flowmeter Medical Air Flowmeter Vacuum Regulator [Continuous] Vacuum Regulator [Continuous/Intermittent] Delete Delete pump and/or compressor Available Accessories Utility Basket Sphygmomanometer Mount Sphygmomanometer Cuff w/ Basket Sharps Container with Mount Single Hook I.V Arm US Patent # 7,878,809 www.hospitalsystems.com
Cogent Infinity Training The Infinity Training s are specifically designed for teaching labs and institutions. The horizontally configured headwall provides Vacuum, Air and simulates Oxygen* just by plugging the unit into an electrical outlet. The Infinity Training provides an inexpensive and quick method for simulating a patient room s medical gas services. The equipment track and rail integrated into the unit allow for space management and organization. The Infinity Training is designed based on your needs. The traditional methods of providing medical gas services can cost thousands of dollars per bed with a centralized vacuum pump and air compressor and a network of piping. The Infinity Training was developed to provide Vacuum, Air and Electrical Power in a self contained cost effective unit that eliminates medical gas problems with lab renovations. A solution that will save thousands of dollars over a traditional centralized system In a few hours you have a fully functional patient room simulation of working Oxygen*, Air and Vacuum service with hospital accurate flow rates and hospital grade receptacles Infinity Training s can be added one at a time as your budget permits The Infinity Training can be moved with ease when lab spacing needs change The Infinity Training horizontal rail is 49 wide x 5 deep x 9 high with a vertical service chase 14 wide x 6 deep x 36 high; housing the self contained pump/ compressor Installation is simple: locate the Infinity Training in position near the bed, secure it to the building wall, plug in the six foot electric cord to an available outlet and you are up and running. *Oxygen simulated with air.
Available Options Overbed Light Fixture [with pull cord switch] Integrated White Dry Erase Board Oxygen Flowmeter Medical Air Flowmeter Vacuum Regulator [Continuous] Vacuum Regulator [Continuous/Intermittent] itional Mounting Brackets as Requested Available Accessories Utility Basket Sphygmomanometer Mount Sphygmomanometer Cuff w/ Basket Sharps Container with Mount Single Hook I.V Arm US Patent # 7,878,809 www.hospitalsystems.com
Cogent Movable Training The Moveable Cogent Training s are specifically designed for teaching labs and institutions. The vertically configured headwall provides Vacuum, Air and simulated Oxygen* just by plugging the unit into an electrical outlet. The Moveable Cogent Training provides an inexpensive and quick method for simulating a patient room s medical gas services, while giving the freedom of a moveable simulation solution that maneuvers easily from one bed to the next. The Moveable Cogent Training is designed to meet your needs. The traditional simulation lab training headwalls provide wall mounted solutions that require installation. The Moveable Cogent Training solution was developed to provide Vacuum, Air and Electrical Power on the go; in a self contained unit that solves typical problems with lab renovations and space issues. *Oxygen simulated with air. Available in Single Sided and Dual Sided Configurations Locking Casters, 2 Fixed and 2 moveable, make for easy maneuverability Available Options Integrated White Dry Erase Board Oxygen Flowmeter Medical Air Flowmeter Vacuum Regulator [Continuous] Vacuum Regulator [Continuous/Intermittent] itional Mounting Brackets as requested Delete Delete pump and/or compressor [eliminates functionality] US Patent # 7,878,809
Cogent Slimline Training The Non-Functional Slimline Training is designed to give the aesthetic of a patient room without the cost associated with medical gas simulation. These units can be wired for Electrical capabilities [inquire at time of order] The Non-Functional Slimline Training can be moved with ease when lab spacing needs change The Non-Functional Slimline Training horizontal rail is 52 wide x 4 Deep x 10 High Installation is simple: locate the Non-Functional Slimline Training in position and secure it to the building wall. Available Options Overbed Light Fixture [with pull cord switch] Vacuum Regulator