VALVOLA THOR: SPLIT BODY 3 vie 4 guarnizioni THOR VALVE: SPLIT BODY 3 way 4 seals
|
|
|
- Meredith Lawson
- 10 years ago
- Views:
Transcription
1 VALVOLA THOR: SPLIT BODY 3 vie 4 guarnizioni THOR VALVE: SPLIT BODY 3 way 4 seals 167
2 FEATURES & BENEFITS Si evitano cariche elettrostatiche che potrebbero essere causa d'innesco in ambienti infiammabili e/o esplosivi 1 Antistatic device (continuità elettrica tra sfera, stelo e corpo) Antistatic device ((electrical continuity between ball, stem and body) Static electricity is avoided which can cause sparks and fire in an inflammable/ explosive environment Sicurezza garantita del contatto durante tutta la vita della valvola Contact safety throughout the entire life of the valve Garantisce una minor coppia di azionamento della valvola 2 Doppio anello antifrizione Less Break Away Torque is granted Double antifriction washer Minor usura rispetto all'esecuzione con singolo anello Less wear comparing with the execution with the single washer 3 Pacco guarnizioni a "v" con 3 guarnizioni più o-ring Si garantisce una perfetta tenuta anche dopo un numero elevato di cicli "V" seals pack; 3 seals + o-ring It ensures a perfect tightness even after a high number of cycles Garantiscono il recupero dei giochi dovuti all'usura causata dal movimento semirotatorio dell'albero evitando perdite vero l'esterno 4 Molle a tazza sulla tenuta dello stelo Guarantee of the recovery of the gap due to the wear caused by the rotational movement of the shaft avoiding leakage towards the outside part. Spring washer on the shaft seal Consentono di mantenere energizzate le guarnizoini tipo "chevron" (a V), evitando perdite verso l'esterno, a fronte di notevoli escursioni termiche Allow to maintain energized the "chevron" seals (V), thus avoiding any leakage to the outside, against huge temperature excursions 5 Tenuta elasticizzata in grafite Garantisce una tenuta verso l'esterno indipendentemente dalle escursioni termiche a cui è sottoposta la valvola Stretch Graphite seal Tightness towards outside is granted, independently by the thermal excursions to which the valve is subjected Maggiore precisione nell'allineamento degli assi grazie alla lavorazione dal grezzo al finito con un unico posizionamento Maggior vita della valvola stessa Longer lifetime of the valve Greater precision in the alignment of axes due to a unique positioning in the Minor coppia di azionamento process machining from raw material to finished valve Less break away torque Contenimento dei costi durante la fase di manutenzione Easy maintainance directly on site Reduced maintainance costs Greater ductility of the material Massimo controllo in tutte le fasi di lavorazione Processo produttivo interamente eseguito in OMAL Maximum control and accuracy in all the stages of the manufacturing process 100% in- house manufacturing process technology Possibilità di fornire rapidamente esecuzioni speciali richieste dal cliente Flexibility in supply quickly special executions requested by customers Certificato ATEX Ne consente l'installazione in presenza di ambiente potenzialmente esplosivo ATEX Certificate Installation is possible in a potential explosive environment Certificazione "TA LUFT fugitive emission" Garantisce un elevato grado di sicurezza della tenuta stelo verso l'esterno TA LUFT fugitive emission Certificate High level of safety of the tightness towards the outside is granted Certificato PED Piena conformità alle norme di sicurezza europee per i dispositivi in pressione PED Certificate Full compliance with European Safety Standards for Pressure Equipment 168 Garantisce una maggior resistenza alla corrosione Valvole in acciaio al carbonio realizzate con materiale normalizzato certi- Greater corrosion resistance ficato nace in esecuzione standard Maggior duttilità del materiale Valves in carbon steel made with certified material - NACE as standard Facile manutenibilità direttamente sull'impianto
3 THOR SPLIT BODY 3VIE 4 GUARNIZIONI IN ACCIAIO AL CARBONIO CARBON STEEL THOR SPLIT BODY 3 WAY 4 SEALS Esecuzione standard Sfera flottante, passaggio totale Tenuta soft seat TFM 1600 Norme per flange d attacco: EN1092-1, ASME B16.5 Classi di pressione : ansi 150; Fluido intercettato: aria, acqua, gas, prodotti petroliferi e petrolchimici, fluidi aggressivi. Antistatic device EN Tenuta stelo: pacco a V di serie in Tenuta addizionale su stelo con O-ring Stelo anti Blow-out Foratura piano per attuatore a norma ISO 5211 Esecuzioni speciali a richiesta Esecuzione per temperatura -40 C in A LF2 Per altri tipi di flangiatura contattare il nostro ufficio commerciale. Guarnizioni di tenuta in: PTFE caricato vetro (RPTFE-GF), PTFE caricato carbografite (RPTFE-CF). Per altri tipi di materiale contattare il nostro ufficio commerciale. Leva, Dadi e molle stelo inox Per esecuzioni speciali con materiali (corpo/sfera/stelo) diversi dallo standard contattare il nostro ufficio commerciale Trattamento superficiale: zincatura bianca, verniciatura epossidica (per altri trattamenti contattare il nostro ufficio commerciale). Certificazioni Conforme alla direttiva Europea 97/23 EC PED Conforme alla direttiva ATEX 94/9/CE Fugitive emission UNI EN ISO Ta-Luft VDI: 2440 Norme di progettazione Spessori corpo in accordo a ASME B16.34, ASME VIII div.1, EN12516 Materiali e rating in accordo ad ASME B16.34 per valvole ANSI ed EN12516 per valvole PN Standard executions Floating ball, full bore Soft-seat seal TFM 1600 Standard for connecting flanges: EN1092-1, ASME B16.5 Pressure Class : ansi 150; Intercepted fluid: air, water, gas, petroleum and petrochemical products, aggressive fluids. Antistatic device EN Stem seal: V-pack Additional seal on stem with FKM O-ring Anti Blow-out stem Actuator connection as per standard ISO 5211 Special executions on request LF2 carbon steel for low temperature execution (-40 C) For other flange types please contact our sales department. Sealing in: PTFE reinforced with glass (RPTFE-GF), PTFE reinforced with carbon-graphite (RPTFE-CF). For other types of materials please contact our sales department. Stainless steel lever Stainless steel stem nuts and springs For special versions with materials (body/ball/stem) different from the standard please contact our sales department Surface treatment: white zinc coating, epoxy coating. For other coating please contact our sales department. Certifications In compliance with European Directive 97/23 EC PED In compliance with ATEX 94/9/CE Directive( on request) Fugitive emission UNI EN ISO Ta-Luft VDI: 2440 Engineering standards Body thickness in compliance with: ASME B16.34, ASME VIII div.1, EN12516 Materials and rating in compliance with ASME B16.34 for ANSI valves and EN12516 for PN valves. 169
4 THOR SPLIT BODY 3 VIE 4 GUARNIZIONI IN ACCIAIO INOX STAINLESS STEEL THOR SPLIT BODY 3 WAY 4 SEALS - Esecuzione standard Sfera flottante, passaggio totale Tenuta soft seat TFM 1600 Norme per flange d attacco: EN1092-1, ASME B16.5 Classi di pressione : ansi 150; Fluido intercettato: aria, acqua, gas, prodotti petroliferi e petrolchimici, fluidi aggressivi. Antistatic device EN Tenuta stelo: pacco a V di serie in Tenuta addizionale su stelo con O-ring Stelo anti Blow-out Foratura piano per attuatore a norma ISO 5211 Esecuzioni speciali a richiesta Per altri tipi di flangiatura contattare il nostro ufficio commerciale. Guarnizioni di tenuta in: PTFE caricato vetro (RPTFE-GF), PTFE caricato carbografite (RPTFE-CF). Per altri tipi di materiale contattare il nostro ufficio commerciale. Leva inox Dadi e molle stelo inox Per esecuzioni speciali con materiali (corpo/sfera/stelo) diversi dallo standard contattare il nostro ufficio commerciale Certificazioni Conforme alla direttiva Europea 97/23 EC PED Conforme alla direttiva ATEX 94/9/CE Fugitive emission UNI EN ISO Ta-Luft VDI: 2440 Norme di progettazione Spessori corpo in accordo a ASME B16.34, ASME VIII div.1, EN12516 Materiali e rating in accordo ad ASME B16.34 per valvole ANSI ed EN12516 per valvole PN Standard executions Floating ball, full bore Soft-seat seal TFM 1600 Standard for connecting flanges: EN1092-1, ASME B16.5 Pressure Class : ansi 150; Intercepted fluid: air, water, gas, petroleum and petrochemical products, aggressive fluids. Antistatic device EN Stem seal: V-pack Additional seal on stem with FKM O-ring Anti Blow-out stem Actuator connection as per standard ISO 5211 Special executions on request For other flanges type please contact our sales department. Sealing in: PTFE reinforced with glass (RPTFE-GF), PTFE reinforced with carbon-graphite (RPTFE-CF). For other types of materials please contact our sales department. Stainless steel lever Stainless steel stem nuts and springs For special versions with materials (body/ball/stem) different from the standard please contact our sales department Certifications In compliance with European Directive 97/23 EC PED In complain with ATEX 94/9/CE Directive ( on request) Fugitive emission UNI EN ISO Ta-Luft VDI: 2440 Engineering standards Body thickness in compliance with: ASME B16.34, ASME VIII div.1, EN12516 Materials and rating in compliance with ASME B16.34 for ANSI valves and EN12516 for PN valves. 170
5 THOR SPLIT BODY 3 VIE 4 GUARNIZIONI THOR SPLIT BODY 3 WAY 4 SEALS TABELLA DIMENSIONI DIMENSIONS TABLE E L M A B C ATT.ISO F/T G H Y Kg ,2 F03 10/ , ,2 F03 10/ , ,1 F04 12/ , , ,1 F04 12/ , , ,1 F05 16/ , , ,1 F05 16/ , , ,1 F05 16/ , , ,1 F05 16/ , , ,5 16,4 F07 22/ ,5 27, ,5 16,4 F07 22/ ,5 25, ,5 16,7 F07 22/ ,5 39, ,5 16,7 F07 22/ ,5 37,7 PN ,3 57, ,3 59,1 PN ,3 71,2 MISURA SIZE ,3 70,6 PN ,3 100, ,3 105,1 Nota: per le valvole con la sfera a T, le dimensioni rimangono invariate Note: for valves with T port, tye dimensions do not change 171
6 THOR SPLIT BODY 3 VIE 4 GUARNIZIONI THOR SPLIT BODY 3 WAY 4 SEALS TABELLA DEI MATERIALI MATERIALS TABLE SPLIT WAFER N F316 Stainless steel body ASTM A LF2 ASTM A105 ASTM A182 F316 / A479TP.316 (x) ASTM A351 CF8M A564 TP.630 (17-4PH) FKM Acciao al carbonio zincato - zinc coated carbon steel (x) 50CrV4 ZINCATO -galvanized (xx) ASTM A351 CF8M A564 TP.630 (17-4PH) FKM 11 Molle stelo / Stem springs ASTM A351 CF8M A564 TP.630 (17-4PH) FKM Acciao al carbonio zincato - zinc coated carbon steel (x) 50CrV4 ZINCATO -galvanized (xx) 12 Dado stelo / stem nut UNI S ZINCATO - galvanized (x) UNI S ZINCATO - galvanized (x) ASTM A320 L7 ASTM A194-Gr S.S. ASTM A193-B7 ASTM A194-Gr.2H 316 S.S. 20 Controdado / lock nut UNI S ZINCATO - galvanized (x) UNI S ZINCATO - galvanized (x) 21 Vite di fermo / Holder screw A2-70 UNI 3740 () Acciao al carbonio zincato - zinc coated carbon steel (x) Fe37 zincato - galvanized (x) A2-70 UNI 3740 () Acciao al carbonio zincato - zinc coated carbon steel (x) Fe37 zincato - galvanized (x) 10 Anello premi guarnizione / packing gland ring Piastra blocca dado / stop nut plate Indicatore / Indicator Guarnizione Corpo-Coperchio / Body-Cover nut gasket Guarnizione Corpo-Terminale / Body-Connector gasket Tiranti / Stud bolt Dadi / nut Dispositivo antistatico / antistatic device 22 Fermo di posizione / holder screw 23 Leva / lever AISI CrV4 ZINCATO -galvanized (xx) UNI S ZINCATO - galvanized (x) ASTM A193-B8 ASTM A194-Gr S.S. UNI S ZINCATO - galvanized (x) A2-70 UNI 3740 () Acciao al carbonio zincato - zinc coated carbon steel (x) Fe37 zincato - galvanized (x) A richiesta disponibile in: Available on request: (x): 304 s.s. (xx): 301 s.s. 172 A105 Carbon steel body Corpo / body Coperchio / cover Terminale / Connector Sfera / Ball Stelo / Stem Seggio / Seat Tenuta inferiore stelo / stem lower sealing Pacco a V / Chevron rings O-ring stelo / Stem O-ring LF2 Carbon steel body Descrizione Description
7 THOR SPLIT BODY 3 VIE 4 GUARNIZIONI IN ACCIAIO CARBONIO E INOX ASSE NUDO E CON LEVA - SFERA A L CARBON AND STAINLESS STEEL 3 WAY AND 4 SEALS THOR SPLIT BODY FREE SHAFT AND WITH LEVER - L BALL CODICI VALVOLE IN ACCIAIO CARBONIO ASSE NUDO (V ) E CON LEVA (L ) CARBON STEEL BARE SHAFT (V ) AND LEVER (L ) OPERATED VALVE CODE misura size A105 Carbon steel V/LT204F03CAA0AFQNV00B V/LT204104CAA0AFQNV00B V/LT205F03CAA0AFQNV00B V/LT205104CAA0AFQNV00B V/LT206F03CAA0AFQNV00B V/LT206104CAA0AFQNV00B V/LT207F03CAA0AFQNV00B V/LT207104CAA0AFQNV00B V/LT208F03CAA0AGQNV00B V/LT208104CAA0AGQNV00B V/LT209F03CAA0AGQNV00B V/LT209104CAA0AGQNV00B V/LT210E03CAA0AGQNV00B V/LT210104CAA0AGQNV00B V/LT211E03CAA0AGQNV00B V/LT211104CAA0AGQNV00B V/LT212E03CAA0AGQNV00B V/LT212104CAA0AGQNV00B LF2 Carbon steel V/LT204F03CBA0AHQNV00B V/LT204104CBA0AHQNV00B V/LT205F03CBA0AHQNV00B V/LT205104CBA0AHQNV00B V/LT206F03CBA0AHQNV00B V/LT206104CBA0AHQNV00B V/LT207F03CBA0AHQNV00B V/LT207104CBA0AHQNV00B V/LT208F03CBA0AIQNV00B V/LT208104CBA0AIQNV00B V/LT209F03CBA0AIQNV00B V/LT209104CBA0AIQNV00B V/LT210E03CBA0AIQNV00B V/LT210104CBA0AIQNV00B V/LT211E03CBA0AIQNV00B V/LT211104CBA0AIQNV00B V/LT212E03CBA0AIQNV00B V/LT212104CBA0AIQNV00B CODICI VALVOLE IN ACCIAIO INOX ASSE NUDO (V ) E CON LEVA (L ) STAINLESS STEEL BARE SHAFT (V ) AND LEVER (L ) OPERATED VALVE CODE 173 misura size F316 Stainless steel V/LT204F03ABA0ADQNV00B V/LT204104ABA0ADQNV00B V/LT205F03ABA0ADQNV00B V/LT205104ABA0ADQNV00B V/LT206F03ABA0ADQNV00B V/LT206104ABA0ADQNV00B V/LT207F03ABA0ADQNV00B V/LT207104ABA0ADQNV00B V/LT208F03ABA0AEQNV00B V/LT208104ABA0AEQNV00B V/LT209F03ABA0AEQNV00B V/LT209104ABA0AEQNV00B V/LT210E03ABA0AEQNV00B V/LT210104ABA0AEQNV00B V/LT211E03ABA0AEQNV00B V/LT211104ABA0AEQNV00B V/LT212E03ABA0AEQNV00B V/LT212104ABA0AEQNV00B
8 THOR SPLIT BODY 3 VIE 4 GUARNIZIONI IN ACCIAIO CARBONIO E INOX ASSE NUDO E CON LEVA - SFERA A T CARBON AND STAINLESS STEEL 3 WAY AND 4 SEALS THOR SPLIT BODY FREE SHAFT AND WITH LEVER - T BALL CODICI VALVOLE IN ACCIAIO CARBONIO ASSE NUDO (V ) E CON LEVA (L ) CARBON STEEL BARE SHAFT (V ) AND LEVER (L ) OPERATED VALVE CODE misura size A105 Carbon steel V/LT304F03CAA0AFQNV00B V/LT304104CAA0AFQNV00B V/LT305F03CAA0AFQNV00B V/LT305104CAA0AFQNV00B V/LT306F03CAA0AFQNV00B V/LT306104CAA0AFQNV00B V/LT307F03CAA0AFQNV00B V/LT307104CAA0AFQNV00B V/LT308F03CAA0AGQNV00B V/LT308104CAA0AGQNV00B V/LT309F03CAA0AGQNV00B V/LT309104CAA0AGQNV00B V/LT310E03CAA0AGQNV00B V/LT310104CAA0AGQNV00B V/LT311E03CAA0AGQNV00B V/LT311104CAA0AGQNV00B V/LT312E03CAA0AGQNV00B V/LT312104CAA0AGQNV00B LF2 Carbon steel V/LT304F03CBA0AHQNV00B V/LT304104CBA0AHQNV00B V/LT305F03CBA0AHQNV00B V/LT305104CBA0AHQNV00B V/LT306F03CBA0AHQNV00B V/LT306104CBA0AHQNV00B V/LT307F03CBA0AHQNV00B V/LT307104CBA0AHQNV00B V/LT308F03CBA0AIQNV00B V/LT308104CBA0AIQNV00B V/LT309F03CBA0AIQNV00B V/LT309104CBA0AIQNV00B V/LT310E03CBA0AIQNV00B V/LT310104CBA0AIQNV00B V/LT311E03CBA0AIQNV00B V/LT311104CBA0AIQNV00B V/LT312E03CBA0AIQNV00B V/LT312104CBA0AIQNV00B CODICI VALVOLE IN ACCIAIO INOX ASSE NUDO IN ACCIAIO INOX (V ) E CON LEVA (L ) STAINLESS STEEL BARE SHAFT (V ) AND LEVER (L ) OPERATED VALVE CODE misura size F316 Stainless steel V/LT304F03ABA0ADQNV00B V/LT304104ABA0ADQNV00B V/LT305F03ABA0ADQNV00B V/LT305104ABA0ADQNV00B V/LT306F03ABA0ADQNV00B V/LT306104ABA0ADQNV00B V/LT307F03ABA0ADQNV00B V/LT307104ABA0ADQNV00B V/LT308F03ABA0AEQNV00B V/LT308104ABA0AEQNV00B V/LT309F03ABA0AEQNV00B V/LT309104ABA0AEQNV00B V/LT310E03ABA0AEQNV00B V/LT310104ABA0AEQNV00B V/LT311E03ABA0AEQNV00B V/LT311104ABA0AEQNV00B V/LT312E03ABA0AEQNV00B V/LT312104ABA0AEQNV00B 174
OMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia
1 OMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia Italy Ph: +39 0308900145 Fax: +39 0308900423 www.omal.it
VALVOLE A SFERA ANSI B 16.10 PASSAGGIO VENTURI
ISO 9001:2008 by L.R. ANSI 300 NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7-1 ANSI B1.20.1 NPT S.W. B.W.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
INFORMAZIONI GENERALI / GENERAL INFORMATION
INFORMAZIONI GENERALI / GENERAL INFORMATION LE FLANGE DELLA SOCIETà INTERTUBI SONO FORNITE IN ACCORDO ALLE SEGUENTI NORME: INTERTUBI S FLANGES ARE PROVIDED IN ACCORDING WITH THE FOLLOWINGS STANDARDS Norma
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK:
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
AIR WORK CILINDRI ISO 15552- SERIE CY CYLINDERS ISO 15552- CY SERIES 1.37 CHIAVE DI CODIFICA / ORDERING CODE CY 00 1 000 0000. Attuatori / Actuators
- SEIE CY - CY SEIES I cilindri serie CY di Airwork sono realizzati rispettando la normativa ISO 15552 ed hanno alesaggi compresi tra 32 e 125 mm. Doppio effetto, ammortizzati e magnetici sono indicati
PN 10 - Art. A020 TIS PN 16 - Art. A021 TIS
- Art. A00 TIS - Art. A0 TIS SARACINESCA CUNEO GOMMATO / CORPO PIATTO / SHORT EN - SERIE DN G K D L H n-d b M S Peso Weight 0 0 0 0 -ø -ø 00. 0 0 -ø -ø 00. 0 -ø -ø. 0 00 0 -ø -ø. 0 0 0 0 -ø -ø. 0 00 -ø
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
QSLM 2000. Dual inlet decompression unit with automatic change-over system FEATURES
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 [email protected] www.idinsertdeal.com QSLM 2000 Dual inlet decompression unit with automatic change-over system FEATURES It allows
DOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
valvole 16 mm ad azionamento pneumatico pneumatically piloted valves - 16 mm
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
YFC... II 2(1) GD Ex d IIC T6 Ex td A21 IP 66/67 T85 C. IECEx SIR 07.0104 94/9/CE EN 60079-0 - EN 60079-1 - EN 61241-0 - EN 61241-1.
Finecorsa ESECUZIONE ANTIEFLAGRANTE II 2(1) G Ex d IIC T6 Ex t A21 IP 66/67 T85 C Limit switches EX COE CERTIFICAZIONE SIRA 07 ATEX 1316 CERTIFICATE IECEx SIR 07.0104 IRETTIVA 94/9/CE IRECTIVE NORME INSTALLAZIONE
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING:
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA ANSI B 16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B 16.10 SPLIT BODY
valvole 16 mm ad azion. meccanico e manuale mechanically and manually actuated valves - 16 mm
mechanically and manually actuated valves - 6 mm Valvole a spola 3/2-5/2 con attacchi filettati G/8 3/2-5/2 spool valves with G/8 threaded ports Spessore della valvola: 6 mm Valve thickness: 6 mm Installazione
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE GAS ISO 7 ANSI B1.20.1 NPT
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
CATALOGO SINTETICO - SHORT FORM CATALOGUE
CATALOGO SINTETICO - SHORT FORM CATALOGUE VALVOLE A SFERA A 2 E 3 VIE CON ATTUATORE PNEUMATICO ROTATIVO PER APPLICAZIONI CHIMICHE E ALIMENTARI corpo di acciaio inox guarnizioni di PTFE 2 AND 3 WAYS BALL
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
VALVOLE A SFERA ANSI B 16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B 16.10 SPLIT BODY
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Contenitori Enclosures
- 19 - Contenitori Enclosures Contenitori in materiale termoplastico per ausiliari di comando Ø 22 Thermoplastic enclosures suitable for control units Ø 22 Dati tecnici generali / General Technical Data
BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA
1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
CATALOGO TECNICO TECHNICAL CATALOGUE
VALVOLE DI SICUREZZA A MEMBRANA DIAPHRAGM SAFETY RELIEF VALVES CATALOGO TECNICO TECHNICAL CATALOGUE Valvola di sicurezza a membrana, femmina/femmina Diaphragm safety relief valve, female/female threads
VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO TOTALE 120. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
Technical information
Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and
expanded metal on stock lamiera stirata in stock
expanded metal on stock lamiera stirata in stock Fratelli Mariani S.p.A. da 80 anni produce lamiera stirata e tela metallica. L azienda, di 0 dipendenti, ha la sua sede operativa a Cormano, alle porte
FOOD & PHARMACEUTICAL
FOOD & PHARMACEUTICAL As Aseptic Seals Tenute asettiche per l industria alimentare e farmaceutica conforme (FDA) Food Compliant Materials (NSF/ANSI) Il nostro ufficio tecnico mette a disposizione specifiche
Produktkatalog (GB/IT)
www.abag.de [email protected] 201003 Produktkatalog (GB/IT) Manometer und Zubehör Kompetenz für Anlagenbau, Betriebstechnik, Automatisierungstechnik, Globalservice Engineering und Serviceleistung Werksanschrift:
TRI CLAMP PRESSURE REGULATORS
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 [email protected] www.idinsertdeal.com TRI CLAMP PRESSURE REGULATORS Stainless steel AISI 316L pressure regulators with clamp
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
BD1 TABELLA DI PERFORMANCE PERFORMANCES TABLE BD1 100 25 100 54 175 45 250 60
BD1 BD1 TABELLA DI PERFORMANCE PERFORMANCES TABLE Max Min Max Min Max Min Max Min BD1 100 25 100 54 175 45 250 60 Displacement / Cilindrata [cc/rev] 99 25 102 54 172 43 243 61 Bore / Alesaggio [mm] 28
RMT RMT RMT RMT Works Area: Lifting Equipment: Machinery: Assembling:
Company Profile RMT operates in field of manufacturing steel valves of high technology for oil, gas petrochemical and power generation. RMT is located in Italy in the town of Solbiate Olona, just north
INDICE INDEX. VITI A RICIRCOLO DI SFERE pp. 2-28. BALLSCREWS pp. 2-28. Tipo chiocciola: Nut type: PLANETARY ROLLERSCREWS pp. 29-56
INDICE INDEX VITI A RICIRCOO DI SFERE pp. - 8 chiocciola: BASCREWS pp. - 8 Nut : Singola flangiata TAB. pag. Singola flangiata precaricata TAB. S pag. 8 Doppia flangiata precaricata TAB. /3 pag. 16 Singola
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
ABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
PRESSACAVI CABLE GLANDS
CTLOGO GENERLE / GENERL CTLOGUE PRESSCVI CLE GLNDS SERIE SERIES PGIN PGE 8.1 PRESSCVI STGNI PER CVO RMTO P-PE-PS 8-2 SEMPLICE TENUT WTER-DUSTPROO CLE GLND OR RMOURED CLE 8.2 PRESSCVI STGNI PER CVO RMTO
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
VALVOLE A SFERA - SERIE 9000 ball valves
VVO S - S 000 ball valves S 0 - VVO MN & MO - mini & micro ball valves pplicazioni - applications Materiali utilizzati - materials used ilettature - threads Pressione d esercizio - Temperatura d esercizio
CILINDRI ISO 6432 CYLINDERS ISO 6432
AI WOK I microcilindri AIWOK sono realizzati secondo le normative europee DIN/ISO 6432 ed hanno alesaggi compresi tra 8 e 25 mm. Le testate sono fissate alla camicia mediante rullatura. Sono realizzabili
James M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
BALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
PDP and SD Series Pump Station
PDP and SD Series Pump Station 1 THE COMPANY SEIM, after 35 years of production, have achieved a leading position in the screw pump market world wide. Our high volume production of market leading products(more
Raccordi per tubi flessibili Fittings for flexible pipes
Raccorderia RACF Raccordi per tubi flessibili Fittings for flexible pipes LP RACF V Z.B E 48 MATERIALE / MATERIAL V: O: TRATTAMENTO / TREATMENTS Z: Raccordo zincato / Galvanized fitting K: Nichelatura
EN20 EN50. Double-stage modular decompression unit for oenological application. FEATURES Dual inlet and single outlet decompression unit.
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 [email protected] www.idinsertdeal.com EN20 EN50 Double-stage modular decompression unit for oenological application FEATURES
CILINDRI SENZA STELO RODLESS CYLINDERS
Il cilindro senza stelo nasce dall esigenza di ridurre gli ingombri a parità di corsa E' fornito in diverse versioni e gli alesaggi variano da 25 a 63. I pregi principali di questo cilindro sono l'eccezionale
ACMO price list GIUNTI - JOINTS - JOINTS. VALVES and TECHNOLOGIES for WATER WORLD ED.1 01/2012
GIUNTI - JOINTS - JOINTS VALVES and TECHNOLOGIES for WATER WORLD GIUNTI COMPENSATORI ASSIALI A SOFFIETTO A SALDARE WELDING ENDS AXIAL EXPANSION JOINTS WITH BELLOW JOINTS DE DILATAT ION AXIALE AVEC SOUFFLET
RPS. Sanitary sampling valves SAMPLING
Sanitary sampling valves SAMPLING CHARACTERISTICS The fully autoclavable sampling valves are designed for aseptic sampling of liquids and pharmaceutical products. Made entirely in AISI 316L, the standard
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA, DI SCARICO OLIO, DI SICUREZZA, A SARACINESCA, RACCORDI BALL VALVES, OIL DRAIN VALVES, SAFETY VALVES, FITTINGS. Capitolo 6 Chapter 6
VALVOLE A SFERA, DI SCARICO OLIO, DI SICUREZZA, A SARACINESCA, RACCORDI BALL VALVES, OIL DRAIN VALVES, SAFETY VALVES, FITTINGS Capitolo 6 Chapter 6 Art. 226 Valvola a sfera con tappo Ball valve with plug
BAF BALL VALVES CATALOGUE
BAF BALL VALVES CATALOGUE for best invalvement 1 BAF BALL VALVES CATALOGUE Index About BAF Valves 3 Certificates 4 BAF Companies 5 Features 6 Applications 6 BAF Floating Ball Valves 7 Part list 8 Pressure
13/30 SERIES / SERIE 13/30 EIA 1 5/8 SERIES / SERIE EIA
13/30 SERIES / SERIE 13/30 EIA 1 5/8 SERIES / SERIE EIA 1 5/8 EIA 1 5/8 CONNECTORS CONNETTORI EIA 1 5/8 2 Main Characteristics - Low reflection coefficient (up to 3 GHz) - Low IMD3 value (-162dBc) - Inner
valvole ISO 5599/1 taglia 1
valvole ISO 5599/1 taglia 1 ISO 5599/1 valves - size 1 Valvole a spola 5/-5/3 5/-5/3 spool valves Montaggio su basi modulari o a posti fissi Installation on manifolds or multiple sub-bases Azionatore manuale
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
Pressure & Flame Protection
Pressure & Flame Protection Safety Relief Valves Safety Relief Valves WB SERIES SPRING LOADED SAFETY RELIEF VALVES The WB is designed safely relieve excess pressure in pumps, pipework, tanks, calorifiers,
Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
Valve Live Loading With Belleville Springs. Belleville Springs for Valve Live Loading
Valve Live Loading With Belleville Springs What is Valve Live Loading? The addition of Belleville Springs to the gland follower studs to maintain the packing load of the valve over time. What s In The
ACCESSORI ACCESSORIES
AESSORI AESSORIES A art. 556 AESSORI - Rubinetti portamanometri a tre vie costruzione in bronzo limite di impiego 16 bar / 80 attacchi M F - - 1/2 - tipo /FLANGIA - tipo /FLANGIA E PREMISTOPPA AESSORIES
Tubi e raccordi per gas e acqua flessibili - estensibili ed accessori. Flexible-extendable gas and water piping, connecting piping and fittings
Tubi e raccordi per gas e acqua flessibili - estensibili ed accessori Flexible-extendable gas and water piping, connecting piping and fittings TUBI FLESSIBILI - ESTENSIBILI PER GAS ED ACCESSORI FLEXIBLE-EXTENDABLE
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
COPRIM - ITALY VALVOLE A FARFALLA IN ACCIAIO PN16 STEEL BUTTERFLY VALVES - VANNE PAPILLON EN ACIER ISPESL 0100 PED
VAVOE A FARFAA IN ACCIAIO PN16 STEE BUTTERFY VAVES VANNE PAPION EN ACIER COPRIM ITAY CARATERISTICHE Features Caracteristiques Pressione massima Max pressure Pression max: 8 bar Temperatura Temperature
[ ] Attuatori pneumatici Pneumatic actuators
![[ ] Attuatori pneumatici Pneumatic actuators](/thumbs/40/21384456.jpg "[ ] Attuatori pneumatici Pneumatic actuators")
[ ] Attuatori pneumatici Pneumatic actuators [Linea G1] Attuatore pneumatico per: finestre a sporgere, cupole. Pneumatic actuator for: top hinged windows, domes. 1250N a 1 MPa Ideale per evacuazione fumo
Magnetic Level Indicators. Indication Control Monitoring. Eisenbau
Magnetic evel Indicators Indication Control Monitoring Eisenbau HOW IT WORKS GENERA CHARACTERISTICS This type of indicator working on communicating vessels principle, is designed for side installation,
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
BALL VALVES SIDE ENTRY TOP ENTRY
SIDE ENTRY TOP ENTRY Quality System AST S.p.A. applies efficient and useful policies aimed at ensuring the quality of the products. The high quality level system implemented within the Company ensures
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
HTM PP/PVDF Thermoplastic mag drive centrifugal pumps HTM PP/PVDF Pompe centrifughe a trascinamento magnetico in materiali termoplastici
www.gemmecotti.com HTM / Thermoplastic mag drive centrifugal pumps HTM / Pompe centrifughe a trascinamento magnetico in materiali termoplastici FEATURES Mag drive centrifugal pumps series HTM / are made
PRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
FCAT08-03-D cross reference - 23 - Serie compressore Compressor series
FCAT08-03-D cross reference 85 83 84 86-23 - 53 52 51 70 69 68 28 67 66 2 110 104 105 103 101 154 78 25 82 81 151 150 149 148 95 147 27 88 89 91 93 77 152 96 153 111 102 55 64 54 63 35 134 133 132 130
CATALOGO STANDARD DI FORNITURA
CATALOGO STANDARD DI FORNITURA Sistema di Gestione REV 00 LAMIERE DA TRENO LAMINATE A CALDO GAMMA PRODUTTIVA ACCIAI DA COSTRUZIONE E DI USO GENERALE ACCIAI RESISTENTI ALLA CORROSIONE ATMOSFERICA ACCIAI
Viso. Tellus processo produttivo, vedi p.13 production process, see p.13
Viso Viso è una plafoniera in alluminio pressofuso, con diffusore in vetro temprato. Consente l impiego di lampade fluorescenti e a incandescenza. E adatto ad arredare esterni ed interni. Viso is a die
Fisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
Design curato Attractive design DATI TECNICI/TECHNICAL PARAMETERS
60 61 Nessun elemento da assemblare No element to assemble DCF System (Distribuzione Costante della Forza) DCF System (Distribution Constant of Force) Abbattimento e rotazione calibrati reversibili Camber
4 vie a pistone con manometri Ø80 classe 1 a secco con vite regolazione
GRUPPI MANOMETRICI 4 VIE A PISTONE 4 WAYS PISTON MANIFOLDS 4 vie a pistone con Ø80 classe 1 Pulse-Free con vite regolazione 4-ways piston with pressure Ø80 class 1 Pulse-Free with regulation screw 04024040
SMT8B pump series. Applications / applicazioni. www.comoso.com. Flow media/fluidi
SMT8B pump series Settima designs and manufactures hydraulic 3 screw pumps and helical rotors pumps. Settima screw pumps, coupled together with external or immersed motors, run quietly and with no pulsations,
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING:
ISO 9001:00 by L.R. PED DIR. 97/3/EC by L.R. ISO 154 by TÜV FA NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf
Terminal Boxes in Glass Fiber Reinforced Polyester (GRP)
Features Variants options Glass fiber reinforced polyester (GRP) enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 16 enclosure size options Various terminal
MADE IN ITALY. Sistemi di connessione per fotovoltaico Connection systems for photovoltaic. TÜV certification EN 50521:2008 SC3
Sistemi di connessione per fotovoltaico Connection systems for photovoltaic TÜV certification EN 505:008 SC Tipologia di prodotto Definizione modelli Informazioni Valori nominali Indice Index Datasheet
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
Fisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
TECHNICAL. information
TECNICAL information Materials Sealing Seals materials are selected according to the service of the valve and leakage requirement. Zero leakage is easier obtained by softer seals, while the resistance
ORBIT VALVES. Ürün Kataloğu - Product Catalogue
ORBIT VLVES tlantis Premium Residance Millet Cad. Sümbül Sok. No: 8-1 Blok Daire:13 34912 Kurtköy / ISTNBUL ORBIT VLVES HOW IT WORKS 1. Open position: The valve is in the full open position. The port of