VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
|
|
|
- Hannah Pierce
- 7 years ago
- Views:
Transcription
1 NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE ISO nbr LRC QMS issued by L.R.Q.A. ATEX nbr issued by B.V. PED nbr COV /01 issued by L.R.V. ISO nbr I /1-/2 issued by TÜV FULL BORE ACCORDING TO ISO On request S.I.L. 3 According to IEC On request FIRE SAFE According to ISO ISO-FT CONSTRUCTION ACCORDING TO: BS EN ANSI B16.34 ISO EN 558 BALL VALVES "WAFER " FULL BORE ROBINETS A BOISSEAU SPHERIQUE WAFER PASSAGE INTEGRAL 3 PIECES FLANSCHKUGELHÄHNE IN "KOMPAKTBAUWEISE" VOLLER DURCHGANG WEB SITE:
2 VALVOLA A SFERA "CORPO PIATTO" PASSAGGIO TOTALE BALL VALVES "WAFER " FULL BORE ROBINETS A BOISSEAU SPHERIQUE "WAFER" PASSAGE INTEGRAL 3 PIECES FLANSCHKUGELHÄHNE IN KOMPAKTBAUWEISE" VOLLER DURCHGANG CONSTRUCTION ACCORDING TO: BS EN ANSI B16.34 ISO EN 558 ACCOPPIAMENTO VALVOLA ATTUATORE CONNECTION VALVE ACTUATOR ACCOUPLEMENT ROBINET- ACTIONNEUR ZUSAMMENBAU KUGELHAHN ANTRIEB ISO-5211
3 N. 1 2 DESCRIZIONE BESCHREIBUNG CORPO BODY CORPS KÖRPER LATERALE END LATERAL GEGENGEHÄUSE MATERIALI MATERIALS MATERIAUX WERKSTOFFE N. ASTM A /316L 9* ASTM A /316L DESCRIZIONE BESCHREIBUNG BUSSOLA STEM SEAL JOINT TIGE UNTERE SPINDELABDICHTUNG 10* PACCO A V CHEVRON RINGS JOINT A V 3 FACHE DACHMANSCHETTE 3* O-RING FKM (VITON) 11 PREMIBUSSOLA PRESSING BUSH PRESSE RONDELLE STOPFBUCHSDRUCKRING ANELLO SEAL 4* ANNEAU DICHTUNGSRING 5* SEDE SEAT SIEGE SITZRING SFERA BALL BOULE KUGEL DISPOSITIVO ANTISTATICO ANTISTATIC DEVICE CONTACT ANTISTATIQUE ANTISTATIK VORRICHTUNG STELO STEM TIGE SPINDEL P.T.F.E. 12 P.T.F.E. (BAM CERTIFIED) 13 R.P.T.F.E. (OPTIONAL) ASTM A351 CF8/CF3 14 ASTM A /316L ASTM A351 CF8M/CF3M ASTM A /316L ASTM A /316L MOLLE A TAZZA SPRING WASHERS RONDELLES BELLEVILLE TELLERFEDERN VITE DI FERMO E FERMO PIN AND STOP PIN PLONT ET PLOT D ARRET ANSCHLAGBOLZEN DADO CONTRODADO NUT LOCK NUT ECROU CONTRE-ECROU MUTTER KONTERMUTTER LEVA WRENCH LEVIER HANDHEBEL VITE SCREW VIS SCHRAUBE MATERIALI MATERIALS MATERIAUX WERKSTOFFE P.T.F.E. P.T.F.E. / GRAFITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHIT ASTM A C72/50Cr V4 X5CrNi17.7 or X12CrNi17.7 UNI GALVANIZED - ON REQUEST GALVANIZED - UNI 3951 A2-70 ON REQUEST UNI S ASTM A AISI 1010 ASTM A UNI GALVANIZED ON REQUEST GALVANIZED ON REQUEST GALVANIZED - UNI 3951 A2-70 ON REQUEST * RICAMBI CONSIGLIATI RECOMMENDED SPARE PARTS PIECES DE RECHANGE CONSEILLEES ERSATZTEIL EMPFEHLUNG DIMENSIONI DIMENSION DIMENSIONS ABMESSUNGEN DN A B C E F M8 M8 ISO F07 F07 G H L M N P 90,5 99,5 R S T ~Kg 23,5 35 DATI E CARATTERISTICHE SOGGETTI A VARIAZIONI SENZA PREAVVISO SPECIFICATIONS SUBJECT TO MODIFICATION WITHOUT PRIOR NOTICE TOUS DROITS DE MODIFICATION RESERVES KONSTRUKTIONSÄNDERUNGEN VORBEHALTEN PN ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com
4 VALVOLA A SFERA "CORPO PIATTO" PASSAGGIO TOTALE BALL VALVES "WAFER " FULL BORE ROBINETS A BOISSEAU SPHERIQUE "WAFER" PASSAGE INTEGRAL FLANSCHKUGELHÄHNE IN KOMPAKTBAUWEISE" VOLLER DURCHGANG ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN ONLY FOR VALVES DN 50 FORO DI BILANCIAMENTO BALANCING HOLE TROU DE BALANCEMENT DRUCKENTLASTUNGSBOHRUNG ON REQUEST AVAILABLE ON DN 40 EXECUTION 4-12 EXECUTION6-16 STANDARD OPTIONAL -MONTAGGIO VITI SCREW ASSEMBLING -MONTAGE VIS EINBAU MIT SCHRAUBEN -MONTAGGIO DI FONDO -END TANK ASSEMBLING -MONTAGE FOND DE CUVE -EINBAU ALS BODENABLASSKUGELHAHN -MONTAGGIO BULLONI -BOLTS ASSEMBLING -MONTAGE BOULONS EINBAU MIT ZUGBOLZEN -STELO ANTI ESPULSIONE -TIGE ANTIEXPULSION -ANTI BLOW OUT STEM -AUSBLASGESICHERTE WELLE STOP LEVER DEVICE BREVETTO PATENTED PACCO A V -JOINT A V ANTISTATIC DEVICE -CHEVRON RINGS -3 FACHE DACHMANSCHETE ANTISTATIK VORRICHTUNG BS O RING STELO O RING ON STEM -TIGE AVEC O RING - O RING IM SPINDELBEREICH
5 VALVOLA A SFERA "CORPO PIATTO" PASSAGGIO TOTALE BALL VALVES "WAFER " FULL BORE ROBINETS A BOISSEAU SPHERIQUE "WAFER" PASSAGE INTEGRAL FLANSCHKUGELHÄHNE IN KOMPAKTBAUWEISE" VOLLER DURCHGANG ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN -PROLUNGA STELO -STEM EXTENSION -TIGE PROLONGEE -SPINDELVERLÄNGERUNG -PARTICOLARI INOX -STAINLESS STEEL DETAILS -ACCESSOIRES EN INOX -EDELSTHALTEILE -ATTACCO ISO -SYSTEM ISO - ISO CONNECTIONS - ANSCHLUSS ISO FIRE SAFE ISO ISO-FT (BS 6755 / API 607) -SFERA CONTENUTA CONTENTS BALL - BOULE CONTENUE -NICHT RAUSRAGENDE KUGEL -TENUTE INTEGRALE -POCKETLESS SEATS -TENUE INTEGRALE -TOTRAUMARM -P.T.F.E. / R.T.F.E. VEDERE / SEE ANSI B16.34 BREVETTO PATENTED DOPPIA TENUTA -DOUBLE ETANCHEITE DOUBLE SEALS -DOPPELTE ABDICHTUNG LATERALE A BATTUTA -METAL BEATING END -LATERAL AVEC BATTUE MECANIQUE -METALLISCHER ANSCHLAG DES GEGENGEHÄUSES -FORO DI SCARICO NELLA SFERA -OVERPRESSURE HOLE INTO BALL -TROU DECOMPRESSION DANS LA BOULE -ENTLASTUNGSBOHRUNG IN DER KUGEL VALVOLA MONO DIREZIONALE MONO-DIRECTIONAL VALVE - SERVIZIO CRIOGENICO CRYOGENIC SERVICE - SERVICE CRYOGÉNIQUE - KÄLTEERZEUGENDER SERVICE -TENUTA INTEGRALE METALLICA -METALLIC POCKET LESS SEATS -TENUE INTEGRALE MATALLIQUE -TOTRAUMARM METALLISCHES -FIRE SAFE ISO FT+ O RING STELO -FIRE SAFE ISO FT+ O RING ON STEM -SECURITE FEU ISO FT+ TIGE AVEC O RING -FEUERSICHERE AUSFÜHRUNG ISO FT + O RING IM SPINDELBEREICH -SFERA CIECA PER CAMPIONATURA - BLIND BALL FOR SAMPLING - PRISE-ECHANTILLON KUGEL FÜR PROBENAHME
6 VITI D ASSEMBLAGGIO PER ASSEMBLING SCREWS FOR VIS D ASSEMBLAGE POUR MONTAGESCHRAUBEN FÜR N VITI DIMENSIONE N SCREW DIMENSIONS N VIS- DIMENSIONS N SCHRAUBEN ABMESSUNGEN PN DN EUROPEAN NORM * 16 M M16 16 M16 16 M M M16 16 M20 X50 16 M20 X50 Rating Rating * N 8 per UNI 2223/2229 Ø ANSI METRIC (STANDARD ADLER) ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ M16 Ø ANSI B1.1 UNC (ON REQUEST) 16 M16 ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ /8 X 1 3/4 16 5/8 X 1 3/4 ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING:
ISO 9001:00 by L.R. PED DIR. 97/3/EC by L.R. ISO 154 by TÜV FA NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA ANSI B 16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B 16.10 SPLIT BODY
VALVOLE A SFERA ANSI B 16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B 16.10 SPLIT BODY
VALVOLE A SFERA ANSI B 16.10 PASSAGGIO VENTURI
ISO 9001:2008 by L.R. ANSI 300 NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING:
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO TOTALE 120. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7-1 ANSI B1.20.1 NPT S.W. B.W.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7-1 ANSI B1.20.1 NPT S.W. B.W.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE GAS ISO 7 ANSI B1.20.1 NPT
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK:
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
OMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia
1 OMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia Italy Ph: +39 0308900145 Fax: +39 0308900423 www.omal.it
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
R u b i n e t t i s o t t o l a v a b o
R u b i n e t t i s o t t o l a v a b o A n g l e v a l v e s ART. 3000 / 3001 ART. 3025 / 3026 senza filtro out filter Rubinetto sottolavabo a vitone con filtro e dado (alto o basso) filter and nut (long
COPRIM - ITALY VALVOLE A FARFALLA IN ACCIAIO PN16 STEEL BUTTERFLY VALVES - VANNE PAPILLON EN ACIER ISPESL 0100 PED
VAVOE A FARFAA IN ACCIAIO PN16 STEE BUTTERFY VAVES VANNE PAPION EN ACIER COPRIM ITAY CARATERISTICHE Features Caracteristiques Pressione massima Max pressure Pression max: 8 bar Temperatura Temperature
VALVOLA THOR: SPLIT BODY 3 vie 4 guarnizioni THOR VALVE: SPLIT BODY 3 way 4 seals
VALVOLA THOR: SPLIT BODY 3 vie 4 guarnizioni THOR VALVE: SPLIT BODY 3 way 4 seals 167 FEATURES & BENEFITS Si evitano cariche elettrostatiche che potrebbero essere causa d'innesco in ambienti infiammabili
DOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
SKU: BV4262. Industrial PVC-U Screwed BSP Ball Valve
SKU: BV4262 PVC-U Screwed BSP Ball Valve PVC-U Geschraubt BSP Kugelventil Válvula de bola roscadas BSP PVC- U 1/2" 2" PVC-U Double Union Ball Valve 1/2 " - 2" PVC-U Doppel Union Kugelhahn 1/2" - 2 " Válvula
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
POMPE ROTOMEC. ELETTROPOMPE SOMMERGIBILI Submersible pumps. IMPIEGO - Application. DESCRIZIONE - Description. DATI ELETTRICI - Electric data
POMPE ROTOMEC ELETTROPOMPE SOMMERGIBILI Submersible pumps UNI EN ISO 9-8 serie 5 TR.6 H (m) GIRANTE VORTEX - Vortex impeller 96 Giri / - R.P.M. Curve secondo ISO 996 Liv: (P).... 5 5 6 7 5 5 l/sec Q m³/h
CATALOGO TECNICO TECHNICAL CATALOGUE
VALVOLE DI SICUREZZA A MEMBRANA DIAPHRAGM SAFETY RELIEF VALVES CATALOGO TECNICO TECHNICAL CATALOGUE Valvola di sicurezza a membrana, femmina/femmina Diaphragm safety relief valve, female/female threads
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
ACCESSORI - ACCESSORIES ZUBEHÖRE - ACCESSOIRES - ACCESORIOS
Controflange - Counterflanges Gegenflansche - Contre-Brides - Bridas Utilizzabile per i modelli Attacco Codice Suitable for models Connection mm Code STYLE 0,5-1-2-3-4-6-8 1/2 95 0507509515/12 ACS 2 1/2
ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA
1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With
TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
VALVOLA DI SICUREZZA A PRESSIONE E DEPRESSIONE PRESSURE AND VACUUM RELIEF VALVE
COSTRUZIONI MECCANICHE LUPI S.r.l. Via Cancelliera, 27-00040 -Ariccia (RM) Tel: +39-06-9343444 / Fax: +39-06-9343256 E-mail: info@lupicm.it www.lupicm.it VALVOLA DI SICUREZZA A PRESSIONE E DEPRESSIONE
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
PN 10 - Art. A020 TIS PN 16 - Art. A021 TIS
- Art. A00 TIS - Art. A0 TIS SARACINESCA CUNEO GOMMATO / CORPO PIATTO / SHORT EN - SERIE DN G K D L H n-d b M S Peso Weight 0 0 0 0 -ø -ø 00. 0 0 -ø -ø 00. 0 -ø -ø. 0 00 0 -ø -ø. 0 0 0 0 -ø -ø. 0 00 -ø
BALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
RPS. Sanitary sampling valves SAMPLING
Sanitary sampling valves SAMPLING CHARACTERISTICS The fully autoclavable sampling valves are designed for aseptic sampling of liquids and pharmaceutical products. Made entirely in AISI 316L, the standard
DETT. B SEZ. A-A. Revision 1: Revisione particolari; revisione distinta - Parts and BOM revision
Revision : Revisione particolari; revisione distinta Parts and BOM revision A DETT. B B A SEZ. AA \\ServerHero\solid\Progetti e Lavori STAN\000 Std STAN\SE\PDM\PDM0\PDM0.000.D.dft D Drawer Disegnatore
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
RMT RMT RMT RMT Works Area: Lifting Equipment: Machinery: Assembling:
Company Profile RMT operates in field of manufacturing steel valves of high technology for oil, gas petrochemical and power generation. RMT is located in Italy in the town of Solbiate Olona, just north
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
BAF BALL VALVES CATALOGUE
BAF BALL VALVES CATALOGUE for best invalvement 1 BAF BALL VALVES CATALOGUE Index About BAF Valves 3 Certificates 4 BAF Companies 5 Features 6 Applications 6 BAF Floating Ball Valves 7 Part list 8 Pressure
FDX 2 Loncin Complessivo Macchina
Loncin Complessivo Macchina 0/50-2/70-2/200 Frame and Chassy (Assembly) 6525 03 Pump BXD 3025G 2/70 7 3605 0092 Vite Speciale Special Screw M8x45 4 6525 035 Pump BXD 3530G 2/200 8 28 0004 Rondella Washer
Wafer, Semi-Lug, Lug and Double Flanged Type
Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off
Linear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
6720808203 (2013/06) No
Ersatzteilliste Spare parts list Liste des pièces de rechange Lista parti di ricambio 6720808203 (2013/06) No DEENFRIT KS RR2 26.06.2013 1 6720808203 26.06.2013 2 6720808203 26.06.2013 3 6720808203 Inhaltsverzeichnis
DRS/A40-115-1.1M GRINDER. Q = Portata / Flow rate / Débit Modello l/min 75 120 180 225 240 270 Model m Modèle
DRS/A40-115-1.1M S.C. 07/13 DRS/A40-115-1.1M CURVE DI PRESTAZIONE PERFORMANCE CURVES COURBES DE PERFORMANCE TABELLA PRESTAZIONI PERFORMANCE TABLE TABLEAU DE PERFORMANCES Q = Portata / Flow rate / Débit
GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
AIR WORK CILINDRI ISO 15552- SERIE CY CYLINDERS ISO 15552- CY SERIES 1.37 CHIAVE DI CODIFICA / ORDERING CODE CY 00 1 000 0000. Attuatori / Actuators
- SEIE CY - CY SEIES I cilindri serie CY di Airwork sono realizzati rispettando la normativa ISO 15552 ed hanno alesaggi compresi tra 32 e 125 mm. Doppio effetto, ammortizzati e magnetici sono indicati
High CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458
LESER UK Bristol sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Beijing, Shanghai and Shenzhen sales.china@leser.com
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
Nozzle Check Valves. NOREVA nozzle check valves are used
Nozzle Check Valves NOREVA nozzle check valves are used in applications where the reverse flow of a fluid has to be avoided. These valves are suitable for all kind of liquid and gaseous fluids and fire
Compact. Performance. Safety Relief Valves Serie 437 Serie 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Serie 437 Serie 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
VALVOLE A SFERA - SERIE 9000 ball valves
VVO S - S 000 ball valves S 0 - VVO MN & MO - mini & micro ball valves pplicazioni - applications Materiali utilizzati - materials used ilettature - threads Pressione d esercizio - Temperatura d esercizio
BALL VALVES SIDE ENTRY TOP ENTRY
SIDE ENTRY TOP ENTRY Quality System AST S.p.A. applies efficient and useful policies aimed at ensuring the quality of the products. The high quality level system implemented within the Company ensures
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
TUBO E RACCORDI MULTISTRATO UNI 10954-1
TUO E RCCORDI MULTISTRTO MIXL RCCORDI PRESSRE PER TUO MIXL CrIMP FITTINGs FOr MIXL PIPE Raccordo diritto intermedio Intermediate coupling COD. CL /pz VS0130501 RXP1 14x2 H 14x2 H 10 5,13 VS0175003 RMP1
Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
VALVOLE A SFERA, DI SCARICO OLIO, DI SICUREZZA, A SARACINESCA, RACCORDI BALL VALVES, OIL DRAIN VALVES, SAFETY VALVES, FITTINGS. Capitolo 6 Chapter 6
VALVOLE A SFERA, DI SCARICO OLIO, DI SICUREZZA, A SARACINESCA, RACCORDI BALL VALVES, OIL DRAIN VALVES, SAFETY VALVES, FITTINGS Capitolo 6 Chapter 6 Art. 226 Valvola a sfera con tappo Ball valve with plug
Magnetic Level Indicators. Indication Control Monitoring. Eisenbau
Magnetic evel Indicators Indication Control Monitoring Eisenbau HOW IT WORKS GENERA CHARACTERISTICS This type of indicator working on communicating vessels principle, is designed for side installation,
Catalogo Parti Di Ricambio Spare Parts List Catalogue Pieces De Rechange Ersatzteilkatalog
Catalogo Parti Di Ricambio Spare Parts List Catalogue Pieces De Rechange Ersatzteilkatalog ASSALE.M AXLE.M ESSIEU.M ACHSE.M REF. st EDITION 0/' REVISION DATE 00 P/N: CA0 AXLE.M REF. INDEX INDICE INDEX
SISTO-16TWA/HWA/DLU. Type Series Booklet
Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents
HTM PUMPS PP-PVDF Non-metallic mag drive centrifugal pumps
HTM S PP-PVDF Non-metallic mag drive centrifugal pumps POMPE HTM PP-PVDF Pompe centrifughe in materiale termoplastico FEATURES: Materials in contact with the liquid: Casing and impeller: PP/PVDF; O-ring:
Catalogo Parti Di Ricambio Spare Parts List
Catalogo Parti Di Ricambio Spare Parts List ASSALE.M FR.M FR AXLE REF. - st EDITION: April / 0 REVISION DATE: July / 0 - CM P/N: CA AXLE.M FR REF. - Indice Index.0. Corpo assale Axle housing.0.0 Calotte
valvole 16 mm ad azionamento pneumatico pneumatically piloted valves - 16 mm
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS
Fluid Level Gauge Fluid Level Sensor Temperature Switch FSA / FSK / TS up to size 381; to PN 0.5; to T = 80 C 1. Description 1.1. General FSA fluid level gauges, FSK fluid level sensors and TS temperature
350G48 STD Gravity slicer Affettatrice a gravità
350G48 STD Gravity slicer Affettatrice a gravità Tab.1 - BASE-TRASMISSION-BLADE/CASSA-TRASMISSIONE-LAMA... 2 Exploded diagram Esploso (Tab.1)... 2 Part list Elenco parti (Tab.1)... 3 Tab.2 MEAT TABLE/PIATTO...
MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
Pressure & Flame Protection
Pressure & Flame Protection Safety Relief Valves Safety Relief Valves WB SERIES SPRING LOADED SAFETY RELIEF VALVES The WB is designed safely relieve excess pressure in pumps, pipework, tanks, calorifiers,
Fisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
G-C600 AR403-GS20 Part nr. K002501
Spare Parts Catalogue Manuale Pezzi di Ricambio G-C600 AR40-GS20 Part nr. K002501 K002501 TAV. 1-14 G-C600-AR40-GS20 G-C600-AR40-GS20 G-C600-AR40-GS20 Date JUN-14 1 2 REF. PART NR. Q.TY Description ENG
Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
2 H OW TO ORDER 2 D ESIGN FEATURES 3 P RODUCTS INDEX 35 O VAL FLANGES 35 B LEED 35 C ONDENSING POTS 36 S YPHONS 36 A IR FEED HEADERS
MEK PIPING srl www.mekpiping.com Sede legale/headquarter : Via San Giovanni osco zona P.I.P. Poggiorsini, () 70020 Tel / Fax + 39 080 37063 - Mob. +39 346 3438582 - E-MIL: mekpiping@mekpiping.com P.IV
Technical information
Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and
10 2161.002201 2161.002401 slide flange. 11 2161.001295 2161.001296 slide ring
spareparts list sparepart part No. code No. GP 40 GP 50 shaft seal 10 2161.002201 2161.002401 slide flange 11 2161.001295 2161.001296 slide ring 12 2161.001226 2161.001265 O-ring 13 5642.ABBR01 5642.ABCD01
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
V&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
Liquefied Natural Gas. Valves, Actuators & Special Solutions
Liquefied Natural Gas Valves, Actuators & Special Solutions Habonim is a leading manufacturer of ball valves & pneumatic actuators. With over 50 years experience, the company enjoys a worldwide reputation
Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
Pressure relief valves Size 6
Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
Guide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
PDP and SD Series Pump Station
PDP and SD Series Pump Station 1 THE COMPANY SEIM, after 35 years of production, have achieved a leading position in the screw pump market world wide. Our high volume production of market leading products(more
Thermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves