Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE.

Transcription

1 Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE

2 Design & Features SHARPE VALVES - SERIES 8/99 Fire Safe API 07 th Edition -Piece Design In-line serviceable swing-out center section allows easy access to internal valve components without disturbing alignment of pipe. Functions as both valve and union. Bottom Entry Live Loaded Stem Four Belleville washers which self adjusts with pressure and temperature fluctuations. Blow-out proof anti-static stem helps prevent accidents and injuries and allow the valves to perform exceptionally well during cycling and in control applications. High Cycle Stem Packing PEEK and Nova* thrust bearings and stem seals extend valve cycle life over conventional ball valves and are the best choice for actuation. Fully Encapsulated Body Seals A tongue and groove design between the body and the end cap and aligns the pipe end with the ball. During fire, the seat is destroyed and the ball moves downstream where it makes contact with a special shaped end that provides a secure fire tight seal. ISO Integral Mounting Pad Ideal for actuation. Centering lip feature assures precise alignment of bracket, stem and coupler. Actuators may be retrofitted on existing Series 8 without disruption of line integrity. Allows for secondary containment unit to be added when necessary. Lockable Handle All Sharpe Series 8/99 Valves meet OSHA standards with locking device. Keeps valves from being opened or closed accidentally. Slotted Seat Design Relief slots help equalize body pressure, reduce torque and assure leak-tight sealing. Seats also provide a wiping action that cleans ball and seats each time valve is cycled. Choice of Seats and Seals A wide variety of seat and seal materials are readily available for the most demanding applications, including Buna, Delrin, Nova*, PEEK, EPDM, Viton, TFE, RTFE, TFM, Grafoil, and UHMWPE. Variety of End Combinations A wide choice of optional end connections are available including, but not limited to threaded ends, socket weld ends, butt weld ends, flush bottom tank pads, flanged ends. Floating Ball Design Precision engineered solid stainless steel ball with relief hole in stem slot prevents build up of cavity pressure while valve is in open position. Bidirectional floating ball seats downstream reduce torque and guarantee a bubble-tight shut off. Encapsulated Body Bolts Heavy duty stainless steel bolting is protected from outside environment assuring valve integrity. Traceability Heat numbers are provided on all valve bodies and ends. CMTR s (certified mill test reports) are available upon request.

3 Parts & Identification C A B A 9A A 9 A B 8 C PART PART NO. body Ends Cap Ball Stem Seat PART PART NO. QTY. MATERIAL Carbon Steel Alloy 0 L Carbon Steel Alloy 0 ASTM A CF8M ASTM A WCB ASTM A CKMCuN ASTM A CN7M ASTM A9 Gr. CW-MW ASTM A9 Gr. M- ASTM A CFM ASTM A WCB ASTM A CKMCuN ASTM A CN7M ASTM A9 TYPE CW-MW ASTM A9 GR M- Alloy 0 Alloy 0 7-PH PTFE TFM (Super TFE) UHMWPE RPTFE Nova PEEK RPTFE UHMWPE Viton Body Seal PTFE Graphite Buna 7 Thrust Bearing Thrust Bearing Stem Packing Stem Packing Seal Protector Nova (UHMWPE with UHMWPE Seats) PEEK (UHMWPE with UHMWPE Seats) Nova (UHMWPE with UHMWPE Seats) 8 9 9A 0 - Graphite PEEK Gland Belleville Washer Packing Nut Cad Plate Carbon Steel A Lock Tab Lower Lock Latch Upper Lock Latch Bolt Latch Bolt Handle (¼ - ) Wrench ( & ) Wrench Block Hex Head Bolt Lock Washer Handle Nut (¼ - ) Body Bolts Nuts Stop Pin Stopper Seat Retainer Carbon Steel Anti-Static Spring Anti-Static Ball B C A B C 7 8 Delrin QTY. MATERIAL 9 0 SHARPE VALVES - SERIES 8/99 Fire Safe API 07 th Edition 8 7

4 Dimensions R M N G C D Q(PCD) V SHARPE VALVES - SERIES 8/99 Fire Safe API 07 th Edition ¼" - " N ½" N G " - " G C C D D A A* 8 Reduce port / 99 Full port B B A A* B A A* R R F T Q(PCD) F Q(PCD) F T 8 99 A* A* B C D F G L M N Q (ISO) R T V ¼", ⅜", ½" ¼", ⅜" ⅜"- UNF (F0). M x PO.8 0. ¾" ½" ⅜"- UNF (F0). M x PO " ¾" "-0 UNF (F0).79 M x PO.8 0. ¼" " "-0 UNF (F0).79 M x PO.8 0. ½" ¼" "-8 UNF (F0).78 M x P " ½" "-8 UNF (F0).78 M x P ½" " M0 x P (F07) 8.7 M8 x P. 0.0 " ½" " - UNS (F0).7 M0 x P. 0.9 " " " - UNS (F0).7 M0 x P. 0.9 * A - 8 Face to Face dimenson for threaded, buttweld & socket weld ends * A - 99 Face to Face dimenson for threaded, buttweld & socket weld ends T M V M V

5 Technical Information 00 Seat Pressure / Temperature Rating Class 00 WCB Pressure (psig) Performance Data 8 99 Cv Flow Coefficiant 80 Note: The maximum pressure/temperature ratings of the valve assemblies are limited to lowest of the body or seat material fitted. The valve body ratings are based on ASME B. rating for materials. The graphs are based on laboratory testing and our experience in field. The seat ratings depend on the material, design, application and function. For higher pressure rating above,80 psig, please consult with Sharpe Valves. Equivalent Length of Pipe (Feet) Approx. Weight (lbs.) Temperature ( F) Port Size ¼" ⅜" ¼" ½" ⅜" ¾" ½"..70. " ¾" ¼" " ½" ¼" " ½" ½" " " ½" " " DELRIN* UHMWPE RTFE PTFE Class 0 WCB Class 0 CF8M TFM PEEK SUPER NOVA Saturated Steam Curve NOVA Class 00 CF8M Class 00 WCB Class 00 CF8M. Delrin and UHMWPE seats should not be used for steam service.. Delrin must not be used in Oxygen applications. Applicable Standaards Body Wall Thickness ASME B. SW & Threaded Ends ASME B. Butt-weld Ends ASME B. Flange Dimensions ASME B. Basic Design ASME B. (note ) Testing (Options) ASME B. API 98 Note : When specified, valves can be furnished in accordance with ASME B. requirements. SHARPE VALVES - SERIES 8/99 Fire Safe API 07 th Edition

6 sharpe valves Choose from our full line of high quality valves and actuators to meet your needs. Whatever your flow control requirements are, Sharpe has the right products and service to meet your needs today. How To Order " FS8 - R G - TE - OH Size Series Body&Ends Ball& Stem Seat Seal Ends Options Valve Size ¼" ⅜" ½" ¾" " ¼" ½" " ½" " " Valve Series 8 Standdard Port 99 Full Port FS8 Fire Safe FS99 Fire Safe V8 Control V99 Control Body & Ends Alloy 0 * Carbon Steel * 7 7- PH Ball & Stem Alloy 0 S/S Seat B* TFM Carbon Filled D Delrin M* TFM N* Nova P Virgin PEEK R* PTFE % Glass Filled T* PTFE U UHMWPE Body Seal G* Graphite I* Impregnated Graphite M TFM T PTFE U UHMWPE V Viton Ends TE Threaded Ends (NPT) TEB Threaded Ends (BSPT) BW Buttweld SCH BW0 Buttweld SCH 0 BW0 Buttweld SCH 0 BW80 Buttweld SCH 80 SW Socket Weld 0# Flanged RF 00# Flanged RF 00# Flanged RF EBW Extended BW ESW Extended SW Options OH Oval Handle L Lockable Ext. Stem GO Gear Operator A Nace VB Vented Ball NS Anti-Static DBB Double Block & Bleed V V-Ball V V0 V-Ball V0 V0 V-Ball V0 X Oxygen Service * Items approved for fire safe valves Viton is a registered trademark of E.I. DuPont. TFM is a registered trademark of Dyneon, LLC 70 Busse Road, Elk Grove Village, IL 0007 Toll Free (877) Local (708) -9 Fax (708) info@sharpevalves.com CHICAGO, IL LOS ANGELES, CA ATLANTA, GA VANCOUVER, WA Due to continuous development of our product range we reserve the right to change the dimensions and information contained in the leaflet as required. Issue: /0