CATALOGO TECNICO TECHNICAL CATALOGUE
|
|
- Horace Greene
- 8 years ago
- Views:
Transcription
1 VALVOLE DI SICUREZZA A MEMBRANA DIAPHRAGM SAFETY RELIEF VALVES CATALOGO TECNICO TECHNICAL CATALOGUE
2 Valvola di sicurezza a membrana, femmina/femmina Diaphragm safety relief valve, female/female threads 368 Voci di capitolato - Technical features Corpo in ottone nichelato. Membrana in EPDM. Molla in acciaio inox. Pressione nominale: 10bar. Temperatura massima d esercizio: 110 C. Sovrepressione apertura: 20%. Scarto di chiusura: 20%. Tarature disponibili: 1,5-1,8-2, bar. Attacchi filettati: ISO228 (equivalente a DIN EN ISO 228 e BS EN ISO 228). Body in nickel-plated brass. Diaphragm: EPDM. Spring: stainless steel. Nominal pressure: 10bar. Maximum working temperature: 110 C. Opening overpressure: 20%. Closing differential: 20%. Available settings: 1,5-1,8-2, bar. Thread: ISO 228 (equivalent to DIN EN ISO 228 and BS EN ISO 228). Misure disponibili: 1/2 x1/2-3/4 x/4-1 x1. Available sizes: 1/2 x1/2-3/4 x3/4-1 x1. 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) /4" (DN 20) 3/4" (DN 20) 3/4" (DN 20) 3/4" (DN 20) 3/4" (DN 20) 3/4" (DN 20) " (DN 25) 1" (DN 25) 1" (DN 25) 1" (DN 25) 1" (DN 25) 1" (DN 25) /120 10/120 10/120 10/120 10/120 10/120 Certificazioni- Certifications
3 Quote di ingombro - Drawing E A MADE IN ITALY B C F misure / size 1/2 x1/2 3/4 x3/4 1 x1 A (mm) 70,5 75,5 85 B (mm) C (mm) 25,5 32,5 38 E (mm) 31, F (mm) 41, press. atmosf./ work. press. Kg/cm 2 - bar press. atmosf. psi lbs work. press Scheda materiali - Materials dati tecnici/technical data Corpo / Body Asta / Stem Molla / Spring Acciaio inox / Stainless steel Piattello / Plate Volantino / Handle Rondella filettata / Threaded washer Resina acetalica / Acetalic resin material Fermo molla / Spring stop Nylon caricato vetro 66 / Nylon glass 66 Cilindro / Cylinder EPDM 70 Piattello da 1 / 1 plate Temperatura / Temperature 110 C Pressione d esercizio / Working pressure Secondo taratura / According to setting
4 Valvola di sicurezza a membrana, maschio/femmina Diaphragm safety relief valve, male/female threads 369 Voci di capitolato - Technical features Corpo in ottone nichelato. Membrana in EPDM. Molla in acciaio inox. Pressione nominale: 10bar. Temperatura massima d esercizio: 110 C. Sovrepressione apertura: 20%. Scarto di chiusura: 20%. Tarature disponibili: 1,5-1,8-2, bar. Attacchi filettati: ISO228 (equivalente a DIN EN ISO 228 e BS EN ISO 228). Misure disponibili: 1/2 x1/2 Available sizes: 1/2 x1/2 Body in nickel-plated brass. Diaphragm: EPDM. Spring: stainless steel. Nominal pressure: 10bar. Maximum working temperature: 110 C. Opening overpressure: 20%. Closing differential: 20%. Available settings: 1,5-1,8-2, bar. Thread: ISO 228 (equivalent to DIN EN ISO 228 and BS EN ISO 228). 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) Certificazioni- Certifications
5 Quote di ingombro - Drawing E A MADE IN ITALY B F misure / size 1/2 x1/2 A (mm) 70,5 B (mm) 23 E (mm) 31,5 F (mm) 41 press. atmosf./ work. press. Kg/cm 2 - bar 10 press. atmosf. psi lbs work. press 145 Scheda materiali - Materials dati tecnici/technical data Corpo / Body Asta / Stem Molla / Spring Acciaio inox / Stainless steel Piattello / Plate Volantino / Handle Rondella filettata / Threaded washer Resina acetalica / Acetalic resin material Fermo molla / Spring stop Nylon caricato vetro 66 / Nylon glass 66 Cilindro / Cylinder EPDM 70 Piattello da 1 / 1 plate Temperatura / Temperature 110 C Pressione d esercizio / Working pressure Secondo taratura / According to setting
6 Valvola di sicurezza a membrana con attacco manometro, femmina/femmina Diaphragm safety relief valve with pressure gauge connection, female/female threads368m Voci di capitolato - Technical features Corpo in ottone nichelato. Membrana in EPDM. Molla in acciaio inox. Pressione nominale: 10bar. Temperatura massima d esercizio: 110 C. Sovrepressione apertura: 20%. Scarto di chiusura: 20%. Tarature disponibili: 1,5-1,8-2, bar. Attacchi filettati: ISO228 (equivalente a DIN EN ISO 228 e BS EN ISO 228). Misure disponibili: 1/2 x1/2 - Attacco manometro: 1/4 Available sizes: 1/2 x1/2 - Pressure gauge connection: 1/4 Body in nickel-plated brass. Diaphragm: EPDM. Spring: stainless steel. Nominal pressure: 10bar. Maximum working temperature: 110 C. Opening overpressure: 20%. Closing differential: 20%. Available settings: 1,5-1,8-2, bar. Thread: ISO 228 (equivalent to DIN EN ISO 228 and BS EN ISO 228). 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) M M M M M M Certificazioni- Certifications
7 Quote di ingombro - Drawing E MADE IN ITALY G B A F C misure / size 1/2 x1/2 A (mm) 70,5 B (mm) 24 C (mm) 25,5 E (mm) 31,5 F (mm) 46 G (mm) 18 press. atmosf./ work. press. Kg/cm 2 - bar 10 press. atmosf. psi lbs work. press 145 Scheda materiali - Materials dati tecnici/technical data Corpo / Body Asta / Stem Molla / Spring Acciaio inox / Stainless steel Piattello / Plate Volantino / Handle Rondella filettata / Threaded washer Resina acetalica / Acetalic resin material Fermo molla / Spring stop Nylon caricato vetro 66 / Nylon glass 66 Cilindro / Cylinder EPDM 70 Piattello da 1 / 1 plate Temperatura / Temperature 110 C Pressione d esercizio / Working pressure Secondo taratura / According to setting
8 Valvola di sicurezza a membrana con attacco manometro, maschio/femmina Diaphragm safety relief valve with pressure gauge connection, male/female threads 369M Voci di capitolato - Technical features Corpo in ottone nichelato. Membrana in EPDM. Molla in acciaio inox. Pressione nominale: 10bar. Temperatura massima d esercizio: 110 C. Sovrepressione apertura: 20%. Scarto di chiusura: 20%. Tarature disponibili: 1,5-1,8-2, bar. Attacchi filettati: ISO228 (equivalente a DIN EN ISO 228 e BS EN ISO 228). Misure disponibili: 1/2 x1/2 - Attacco manometro: 1/4 Available sizes: 1/2 x1/2 - Pressure gauge connection: 1/4 Body in nickel-plated brass. Diaphragm: EPDM. Spring: stainless steel. Nominal pressure: 10bar. Maximum working temperature: 110 C. Opening overpressure: 20%. Closing differential: 20%. Available settings: 1,5-1,8-2, bar. Thread: ISO 228 (equivalent to DIN EN ISO 228 and BS EN ISO 228). 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) 1/2" (DN 15) M M M M M M Certificazioni- Certifications
9 Quote di ingombro - Drawing E MADE IN ITALY G B A F misure / size 1/2 x1/2 A (mm) 73 B (mm) 26 E (mm) 31,5 F (mm) 46 G (mm) 19,5 press. atmosf./ work. press. Kg/cm 2 - bar 10 press. atmosf. psi lbs work. press 145 Scheda materiali - Materials dati tecnici/technical data Corpo / Body Asta / Stem Molla / Spring Acciaio inox / Stainless steel Piattello / Plate Volantino / Handle Rondella filettata / Threaded washer Resina acetalica / Acetalic resin material Fermo molla / Spring stop Nylon caricato vetro 66 / Nylon glass 66 Cilindro / Cylinder EPDM 70 Piattello da 1 / 1 plate Temperatura / Temperature 110 C Pressione d esercizio / Working pressure Secondo taratura / According to setting
valvole 16 mm ad azion. meccanico e manuale mechanically and manually actuated valves - 16 mm
mechanically and manually actuated valves - 6 mm Valvole a spola 3/2-5/2 con attacchi filettati G/8 3/2-5/2 spool valves with G/8 threaded ports Spessore della valvola: 6 mm Valve thickness: 6 mm Installazione
More informationvalvole 16 mm ad azionamento pneumatico pneumatically piloted valves - 16 mm
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
More informationVALVOLE A SFERA, DI SCARICO OLIO, DI SICUREZZA, A SARACINESCA, RACCORDI BALL VALVES, OIL DRAIN VALVES, SAFETY VALVES, FITTINGS. Capitolo 6 Chapter 6
VALVOLE A SFERA, DI SCARICO OLIO, DI SICUREZZA, A SARACINESCA, RACCORDI BALL VALVES, OIL DRAIN VALVES, SAFETY VALVES, FITTINGS Capitolo 6 Chapter 6 Art. 226 Valvola a sfera con tappo Ball valve with plug
More informationVALVOLE A SFERA - SERIE 9000 ball valves
VVO S - S 000 ball valves S 0 - VVO MN & MO - mini & micro ball valves pplicazioni - applications Materiali utilizzati - materials used ilettature - threads Pressione d esercizio - Temperatura d esercizio
More informationProduktkatalog (GB/IT)
www.abag.de info@abag.de 201003 Produktkatalog (GB/IT) Manometer und Zubehör Kompetenz für Anlagenbau, Betriebstechnik, Automatisierungstechnik, Globalservice Engineering und Serviceleistung Werksanschrift:
More information4 vie a pistone con manometri Ø80 classe 1 a secco con vite regolazione
GRUPPI MANOMETRICI 4 VIE A PISTONE 4 WAYS PISTON MANIFOLDS 4 vie a pistone con Ø80 classe 1 Pulse-Free con vite regolazione 4-ways piston with pressure Ø80 class 1 Pulse-Free with regulation screw 04024040
More informationPN 10 - Art. A020 TIS PN 16 - Art. A021 TIS
- Art. A00 TIS - Art. A0 TIS SARACINESCA CUNEO GOMMATO / CORPO PIATTO / SHORT EN - SERIE DN G K D L H n-d b M S Peso Weight 0 0 0 0 -ø -ø 00. 0 0 -ø -ø 00. 0 -ø -ø. 0 00 0 -ø -ø. 0 0 0 0 -ø -ø. 0 00 -ø
More informationACCESSORI ACCESSORIES
AESSORI AESSORIES A art. 556 AESSORI - Rubinetti portamanometri a tre vie costruzione in bronzo limite di impiego 16 bar / 80 attacchi M F - - 1/2 - tipo /FLANGIA - tipo /FLANGIA E PREMISTOPPA AESSORIES
More informationvalvole ISO 5599/1 taglia 1
valvole ISO 5599/1 taglia 1 ISO 5599/1 valves - size 1 Valvole a spola 5/-5/3 5/-5/3 spool valves Montaggio su basi modulari o a posti fissi Installation on manifolds or multiple sub-bases Azionatore manuale
More informationACCESSORI - ACCESSORIES ZUBEHÖRE - ACCESSOIRES - ACCESORIOS
Controflange - Counterflanges Gegenflansche - Contre-Brides - Bridas Utilizzabile per i modelli Attacco Codice Suitable for models Connection mm Code STYLE 0,5-1-2-3-4-6-8 1/2 95 0507509515/12 ACS 2 1/2
More informationQSLM 2000. Dual inlet decompression unit with automatic change-over system FEATURES
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com QSLM 2000 Dual inlet decompression unit with automatic change-over system FEATURES It allows
More informationBUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
More informationSERRATURE PER SERRANDE E TAPPARELLE - ROLLER SHUTTER, LIGHT BOTTOM BAR AND METAL CABINET LOCK
SERRATURE PER SERRANDE E TAPPARELLE - ROLLER SHUTTER, LIGHT BOTTOM BAR AND METAL CABINET LOCK SPECIFICHE GENERALI GAMMA DI PRODUZIONE Chiusura superiore o inferiore. Doppia chiusura superiore/inferiore.
More informationOMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia
1 OMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia Italy Ph: +39 0308900145 Fax: +39 0308900423 www.omal.it
More informationORLANDO srl. M P R 50 025 OPTIMA Radial pressure gauges for swimming-pools 0-2,5 Bar
Chiavari (Ge) - Italia Tel.: Italia + 0185 + 38.50.10 Fax: Italia + 0185 + 38.50.11 e-mail: orlando@orlando.it Http://www.orlando.it M R 50...: Radial pressure gauge ø 50 ( available scale in bar: 4, 6,10,12,16
More informationVALVOLA DI SICUREZZA A PRESSIONE E DEPRESSIONE PRESSURE AND VACUUM RELIEF VALVE
COSTRUZIONI MECCANICHE LUPI S.r.l. Via Cancelliera, 27-00040 -Ariccia (RM) Tel: +39-06-9343444 / Fax: +39-06-9343256 E-mail: info@lupicm.it www.lupicm.it VALVOLA DI SICUREZZA A PRESSIONE E DEPRESSIONE
More information[ ] Attuatori pneumatici Pneumatic actuators
[ ] Attuatori pneumatici Pneumatic actuators [Linea G1] Attuatore pneumatico per: finestre a sporgere, cupole. Pneumatic actuator for: top hinged windows, domes. 1250N a 1 MPa Ideale per evacuazione fumo
More informationAIR WORK CILINDRI ISO 15552- SERIE CY CYLINDERS ISO 15552- CY SERIES 1.37 CHIAVE DI CODIFICA / ORDERING CODE CY 00 1 000 0000. Attuatori / Actuators
- SEIE CY - CY SEIES I cilindri serie CY di Airwork sono realizzati rispettando la normativa ISO 15552 ed hanno alesaggi compresi tra 32 e 125 mm. Doppio effetto, ammortizzati e magnetici sono indicati
More informationHTM PUMPS PP-PVDF Non-metallic mag drive centrifugal pumps
HTM S PP-PVDF Non-metallic mag drive centrifugal pumps POMPE HTM PP-PVDF Pompe centrifughe in materiale termoplastico FEATURES: Materials in contact with the liquid: Casing and impeller: PP/PVDF; O-ring:
More information9.1 9.2 9.3 20.1 20.2 20.3 20.4 20.5 20.6 20.7 20.8. Indice Table of Contents. Prezzo diminuito Decreased Price. Prezzo aumentato.
Indice Table of Contents 1 Espositori Displays 3 2 Attacchi - raccordi Joints 7 3 Raccordi a calzamento Joints with screw on nuts 12 4 Raccordi automatici in ottone con pinzette presa tubo in acciaio inox
More informationTRI CLAMP PRESSURE REGULATORS
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com TRI CLAMP PRESSURE REGULATORS Stainless steel AISI 316L pressure regulators with clamp
More informationBD1 TABELLA DI PERFORMANCE PERFORMANCES TABLE BD1 100 25 100 54 175 45 250 60
BD1 BD1 TABELLA DI PERFORMANCE PERFORMANCES TABLE Max Min Max Min Max Min Max Min BD1 100 25 100 54 175 45 250 60 Displacement / Cilindrata [cc/rev] 99 25 102 54 172 43 243 61 Bore / Alesaggio [mm] 28
More informationHTM PP/PVDF Thermoplastic mag drive centrifugal pumps HTM PP/PVDF Pompe centrifughe a trascinamento magnetico in materiali termoplastici
www.gemmecotti.com HTM / Thermoplastic mag drive centrifugal pumps HTM / Pompe centrifughe a trascinamento magnetico in materiali termoplastici FEATURES Mag drive centrifugal pumps series HTM / are made
More informationREGOLATORE ELETTRONICO DI FLUSSO ELECTRONIC PRESS CONTROL CARATTERISTICHE TECNICHE: TECHNICAL CARACHTERISTICS:
REGOLATORE ELETTRONICO DI FLUSSO ELECTRONIC PRESS CONTROL CARATTERISTICHE TECNICHE: TECHNICAL CARACHTERISTICS: AWC 10 - Corrente massima: 10A - Max current: 10A - Potenza massima : 1,1 Kw - Max power:
More informationR u b i n e t t i s o t t o l a v a b o
R u b i n e t t i s o t t o l a v a b o A n g l e v a l v e s ART. 3000 / 3001 ART. 3025 / 3026 senza filtro out filter Rubinetto sottolavabo a vitone con filtro e dado (alto o basso) filter and nut (long
More informationTubi e raccordi per gas e acqua flessibili - estensibili ed accessori. Flexible-extendable gas and water piping, connecting piping and fittings
Tubi e raccordi per gas e acqua flessibili - estensibili ed accessori Flexible-extendable gas and water piping, connecting piping and fittings TUBI FLESSIBILI - ESTENSIBILI PER GAS ED ACCESSORI FLEXIBLE-EXTENDABLE
More informationRaccordi per tubi flessibili Fittings for flexible pipes
Raccorderia RACF Raccordi per tubi flessibili Fittings for flexible pipes LP RACF V Z.B E 48 MATERIALE / MATERIAL V: O: TRATTAMENTO / TREATMENTS Z: Raccordo zincato / Galvanized fitting K: Nichelatura
More informationNormalmente aperte. Pressione massima di esercizio 0,5 bar. Corpo in ottone Normally open. Max operating pressure 0,5 bar. Brass body.
31-IT/3_CATALOGO ANELLO_2012_Rev.10.qxd 31-01-2012 15:52 Pagina 53 MSVO Normalmente aperte. Pressione massima di esercizio 0,5 bar. Corpo in ottone Normally open. Max operating pressure 0,5 bar. Brass
More informationM A D E I N I T A LY C O L L E C T I O N
M I N I T LY V LV O L O L L T I O N SRI SVN SVN SRI V LV O L V LV S ➆ ➄ ➅ ➁ ➇ ➂ ➀ ➃ OMPONN- TI ➀ orpo ➁ Manicotto ➂ Sfera ➃ Sedi tenuta sfera ➄ sta ➅ O - Ring tenuta asta ➆ Leva alluminio arfalla alluminio
More informationconveyor support components
13 september pag. 17 pag. 175 pag. 17 pag. 175 pag. 177 pag. 173 pag. 176 pag. 178 pag. 181 pag. 173 pag. 176 pag. 179 pag. 18 pag. 183 pag. 17 pag. 176 pag. 179 pag. 18 pag. 18 pag. 18 pag. 17 pag. 177
More informationCV SERIES. SENSORI FOTOELETTRICI A FIBRA OTTICA - SERIE CV CV series - photoelectric sensors FOR OPTICAL FIBRES
SENSORI FOTOELETTRICI A FIBRA OTTICA - SERIE CV CV series - photoelectric sensors FOR OPTICAL FIBRES Fibre ottiche in vetro per alte temperature serie CV Glass optical fibres for high tempetures CV series
More informationChiavi e Lucchetti. Keys and padlocks. Chiavi grezze Key blanks. Cat.No. Perni Pins. Mano della porta Hand of the door. Perni Pins. Destra.
Chiavi e Lucchetti Keys and padlocks Chiavi grezze Key blanks Mano della porta Hand of the door =mm 00400 00400 00 Destra Right Sinistra Left 4 00000 00000 00 Destra Right Sinistra Left 4 00300 00300 00
More informationCILINDRI ISO 6432 CYLINDERS ISO 6432
AI WOK I microcilindri AIWOK sono realizzati secondo le normative europee DIN/ISO 6432 ed hanno alesaggi compresi tra 8 e 25 mm. Le testate sono fissate alla camicia mediante rullatura. Sono realizzabili
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More informationTubo altissima pressione / Very high pressure hose
Tubo altissima pressione / Very high pressure hose Pagina / Page 2 3 SAE 100 R15 EN 856 SAE 100 R13 217 213 SAE 100 R15 EN 856 SAE 100 R13 Pagina / Page 4 5 6 7 8 EN 856 DIN 20023 3SK 214 214 214 218 218
More informationThermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special
More informationMAGGIORAZIONI PER IMPIANTI SPECIALI EXTRA CHARGES FOR KEYING ARRANGEMENTS pag. 12 D
08A1166_FIAM08 06 INFILARE CIL 20-09-2008 8:11 Pagina 77 INDICE CATEGORICO CATEGORIC INDEX pag. 2 A INDICE ANALITICO ANALYTIC INDEX pag. 4 B CONDIZIONI DI VENDITA SALES CONDITIONS pag. 10 C MAGGIORAZIONI
More informationPinza pneumatica per materozze, angolare non autocentrante a due griffe serie PB. 2-jaw non-selfcentering angular pneumatic sprue gripper series PB
PB Pinza pneumatica per materozze, angolare non autocentrante a due griffe serie PB 2-jaw non-selfcentering angular pneumatic sprue gripper series PB (*) (*) (*) Il sensore SS3N203-G è incluso The sensor
More informationP2 a richiesta - on request - sur demande. Pos. Descrizione Description Description DN PN
modulo H - H Cod..0.0 Q = 0 00 mc/h P = 0, bar DN 0 DN 0 P a richiesta - on request - sur demande Valvola a sfera Vanne sphérique Ball valve 0 Filtro a cartuccia G 0, Coprim Filtre à cartouche Cartridge
More informationSelf-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
More informationSOLARE SOLAR TUBI CORRUGATI PER IMPIANTI A PANNELLI SOLARI CORRUGATED TUBES FOR SOLAR PANEL INSTALLATIONS. Set di due tubi corrugati e formabili CSST
E TUBI CORRUGATI PER IMPIANTI A PANNELLI I Set di due tubi corrugati e formabili CSST (Corrugated Stainless Steel Tubing) in acciaio INOX Rivestiti con isolante termico in EPDM espanso a celle chiuse Completi
More informationTN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPDP and SD Series Pump Station
PDP and SD Series Pump Station 1 THE COMPANY SEIM, after 35 years of production, have achieved a leading position in the screw pump market world wide. Our high volume production of market leading products(more
More informationECO low pressure manual spray gun ECO pistola manuale a bassa pressione
LOW PRESSURE MANUAL SPRAY GUN / PISTOLE MANUALI A BASSA PRESSIONE ECO low pressure manual spray gun ECO pistola manuale a bassa pressione ECO spray gun Nozzle size : 1.5-1.7-1.9-2.2 (Replace xx with the
More informationDoccia Vasca Shower Bath-Tub. 433.1S piatto doccia acciaio Ø65 1" Ø65 stell shower tray 433.2S 1"1/4. 421.2S piatto doccia fire-clay Ø80 1"1/4
.1 Piletta piatto doccia a griglia senza dado e codolo 4.1S piatto doccia acciaio Ø65 1" Ø65 stell shower tray 4.2S 1"1/4 Grill waste for shower tray without nut and tang 421.2S piatto doccia fire-clay
More informationType 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
More informationNEWS 3 LEGENDA ICONE - OMOLOGAZIONI ICONS DESCRIPTION - HOMOLOGATIONS. marzo 2013
marzo 2013 LEGENDA ICONE - OMOLOGAZIONI ICONS DESCRIPTION - HOMOLOGATIONS XENA Security ha iniziato la propria attività nei primi anni 90, quando un gruppo di ingegneri inglesi appassionati di moto hanno
More informationLED & LIGHTING. L ILLUMINAZIONE A LED Fusioni in alluminio e acciaio. Prodotti e servizi
CIMEE ELETTRONICA 20/12/2010 LED & LIGHTING L ILLUMINAZIONE A LED Fusioni in alluminio e acciaio Prodotti e servizi Prodotti a stock Prodotti a richiesta Parti di ricambio Applicazioni realizzate Serie
More informationArt. W 2. Incontro reversibile. Incontro c/aletta Striking plate for locks. Reversibile striking plate 82 M 70 M 68 M 79
Tagliapietra Cerniere per porta cristallo con supporto Hinges for crystal doors with hook Art. CE100 Art. CE300 Cerniera a pavimento semitonda Applicazione telaio legno o alluminio c/battuta mm 28/32x10*
More informationACMO price list GIUNTI - JOINTS - JOINTS. VALVES and TECHNOLOGIES for WATER WORLD ED.1 01/2012
GIUNTI - JOINTS - JOINTS VALVES and TECHNOLOGIES for WATER WORLD GIUNTI COMPENSATORI ASSIALI A SOFFIETTO A SALDARE WELDING ENDS AXIAL EXPANSION JOINTS WITH BELLOW JOINTS DE DILATAT ION AXIALE AVEC SOUFFLET
More informationFDX 2 Loncin Complessivo Macchina
Loncin Complessivo Macchina 0/50-2/70-2/200 Frame and Chassy (Assembly) 6525 03 Pump BXD 3025G 2/70 7 3605 0092 Vite Speciale Special Screw M8x45 4 6525 035 Pump BXD 3530G 2/200 8 28 0004 Rondella Washer
More informationSerie 410-510 DN8 / 420-520 DN12 GIUNTI AD INNESTO RAPIDO PER RAFFREDDAMENTO STAMPI. QUICK COUPLINGS FOR MOLDING COOLING. 11,45
Serie 410-510 N8 / 420-520 N12 GIUNTI INNESTO RPIO PER RFFREMENTO STMPI. QUIK OUPINGS FOR MOING OOING. 11,45 Quick ouplings 410-510 N8 / 420-520 N12 a particolare struttura comporta ingombri ridotti e
More informationCATALOGO SINTETICO - SHORT FORM CATALOGUE
CATALOGO SINTETICO - SHORT FORM CATALOGUE VALVOLE A SFERA A 2 E 3 VIE CON ATTUATORE PNEUMATICO ROTATIVO PER APPLICAZIONI CHIMICHE E ALIMENTARI corpo di acciaio inox guarnizioni di PTFE 2 AND 3 WAYS BALL
More informationPRESSURE REDUCING VALVES
0E0-GB PRESSURE REDUCING VAVES MAIN FEATURES The pressure reducing valve is able, by varying its pressure drops, to hold the downstream pressure of the fluid at a constant level against changes in the
More informationValve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
More informationHANDLES AND LOCKING SYSTEMS
60 Maniglie ad incasso orizzontali in AB AB flush-fitted, horizontal handles 224 58/08 58/10 58/12 58/15 1 1,5 / Maniglie ad incasso orizzontali in AB con portacartellino AB flush-fitted, horizontal handles
More informationstate precision DESCRIZIONE DESCRIPTION ENTRATA INLET Testina portaugello regolabile Adjustable nozzle Tête réglable Cabeza portaboquilla regulable
state ACCESSORI per lance e pistole state ACCESSORIES for lances and guns - ACCESSOIRES pour lances Et pistolets - ACCESORIOS para lanzas y pistolas cu APPLICAZIONI APPLICATION 84.6650.00.2 Testina portaugello
More informationVery high pressure hoses. Tubo altissima pressione / Very high pressure hose
Tubo altissima pressione / Very high pressure hose Pagina / Page 2 3 SAE 100 R15 EN 856 SAE 100 R13 TFSM015 TFSM013 SAE 100 R15 EN 856 SAE 100 R13 Pagina / Page 4 5 6 7 8 EN 856 DIN 20023 3SK TFDM4SH TFCM4SH
More information3/2-way Mini Solenoid Valve
3/2way Mini Solenoid Valve Directacting 0... bar DN mm... DN mm,,, subbase, banjobolt connection 21mm coil spacing when mounted on manifold Type can be combined with... Type 20 Type 207 Type able plug
More informationproduzione di componenti di base per bigiotteria e accessori per la moda production of components for imitation jewellery and fashion accessories
1 pag. 2 pag. 3 pag. 4 pag. 5 pag. 6 pag. 7 pag. 8 pag. 9 pag. 10 pag. 11 pag. 12 pag. 13 pag. 14 pag. 15 pag. 16 pag. 17 pag. 18 pag. 19 pag. 20 pag. 21 pag. 22 2 nuovi collarini di filo elastico a spirale
More informationContenitori Enclosures
- 19 - Contenitori Enclosures Contenitori in materiale termoplastico per ausiliari di comando Ø 22 Thermoplastic enclosures suitable for control units Ø 22 Dati tecnici generali / General Technical Data
More informationEN20 EN50. Double-stage modular decompression unit for oenological application. FEATURES Dual inlet and single outlet decompression unit.
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com EN20 EN50 Double-stage modular decompression unit for oenological application FEATURES
More informationVALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
More informationCILINDRI SENZA STELO RODLESS CYLINDERS
Il cilindro senza stelo nasce dall esigenza di ridurre gli ingombri a parità di corsa E' fornito in diverse versioni e gli alesaggi variano da 25 a 63. I pregi principali di questo cilindro sono l'eccezionale
More informationSystem 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More informationCatalogo / Catalogue. Componenti per impianti a gasolio, olio combustibile e gas Components for fuel, heavy oil and gas systems
Catalogo / Catalogue 015 Componenti per impianti a gasolio, olio combustibile e gas Components for fuel, heavy oil and gas systems www.giulianianello.com il nostro sito / our website Giuliani Anello è
More informationSerrature a doppia mappa da infilare. Mortise locks with double bitted keys
DM Mortise locks with double bitted keys DM 53 Chiave in ottone nichelato Nickel-plated brass key Nichelata Nickel plated Normale dotazione per serrature a 2 e 4 mandate A richiesta per sbozzi di riproduzione.
More information6Serrature per infissi e serrande Locks for fixtures and Rolling shutter
Serrature per infissi e serrande Locks for fixtures and Rolling shutter 8 Serrature per infissi e serrande Locks for fixtures and Rolling shutter Cipierre 2013 Bunkerlocks Bunkerlocks BREVETTATO PAT E
More informationSelf-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
More informationPRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM
PRESSURE REDUCER AND RELIEF VALVES WITH METALLIC BELLOW FOR WATER STEAM PRESSURE REDUCER AND RELIEF VALVES These devices are used to reduce and control a gaseous flow pressure (air, steam, gas ). The PRESSURE
More informationCARATTERISTICHE TECNICHE / TECHNICAL SPECIFICATIONS. Temperatura di impiego Operative temperature. Passaggio nominale Nominal diameter
SERIE SMS 3.3..C4. CODICE DI ORDINAZIONE / DECODING TRE UTILIZZI 3.3..C4.. 040. XX THREE SECTIONS Comando Pneumatico Pneumatic Control SEZIONI/ STAGES CODICE BASE/BASIC CODE POSSIBILI VERSIONI/AVAILABLE
More informationFlow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow
More informationSerie ET / ET Series
Sensori di prossimità induttivi con campo di temperatura di lavoro esteso Extended working temperature range proximity inductive sensors Corpo in acciaio inox / stainless steel housing Modelli M12, M18
More informationRAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description
Worldwide Contacts www.tyco-fire.com RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description The TYCO RAPID
More informationThermostatic element RAVV for 2-way valves
Description / Application RAVV is a self-acting thermostatic element which can be combined with 2-way valve bodies RAV-/8, VMT-/8 or VMA 15. RAVV is used to control temperatures in small hot water cylinders
More informationstainless steel pre-assembled manifolds
TECHNICAL CATALOGUE stainless steel pre-assembled manifolds TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and
More informationValves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO from 0... 00 mbar up to 0... 40 bar Output signals
More information4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More informationTUBO E RACCORDI MULTISTRATO UNI 10954-1
TUO E RCCORDI MULTISTRTO MIXL RCCORDI PRESSRE PER TUO MIXL CrIMP FITTINGs FOr MIXL PIPE Raccordo diritto intermedio Intermediate coupling COD. CL /pz VS0130501 RXP1 14x2 H 14x2 H 10 5,13 VS0175003 RMP1
More informationAutomatic Bypass Control AVDO
Application AVDO is a self-acting constant flow control primarily used either to maintain minimum flow rates through e.g. a low-capacity gas boiler or to control the differential pressure in a central
More informationComando elettrico di potenza ( motori e resistenze ) Electrical power parts ( motors and heaters )
Comando elettrico di potenza ( motori e resistenze ) Electrical power parts ( motors and heaters ) Pos. Model Cod. Descrizione Description Note ( QTY ) E ELE RES 0005 Resistenza Kw Heating element KW (
More informationIl freddo a misura di mare
Frigonautica Il freddo a misura di mare Impianti frigoriferi per imbarcazioni da diporto Refrigerating units for yachts RICAMBI E ACCESSORI PER COMPRESSORI SPARE PARTS AND ACCESSORIES FOR COMPRESSORS MOTORI
More informationSolenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
More informationViso. Tellus processo produttivo, vedi p.13 production process, see p.13
Viso Viso è una plafoniera in alluminio pressofuso, con diffusore in vetro temprato. Consente l impiego di lampade fluorescenti e a incandescenza. E adatto ad arredare esterni ed interni. Viso is a die
More informationCAVI CANDELA ignition cables
GRUPPI CAVI ANTIDISTURBO Suppressing sets MARCA/maker MODELLI/models 7641 PEUGEOUT 7642 PEUGEOUT 7493 PEUGEOUT 106 950/1,1DOPO 91-205 MOT. TU DOPO 88 405 1,4 CARB. DOPO 88 106 950 DOPO 92-1,1 DOPO 93-1,4
More informationSaldatura e Fusione Soldering and Melting. CANNELLI A GAS PROPANO LIQUIDO GPL Propane Torches. Impugnatura ECON a pistola. Impugnatura CLA a lancia
CANNELLI A GAS PROPANO LIQUIDO GPL Propane Torches Cannelli ad aria aspirata che funzionano sfruttando la percentuale di ossigeno contenuta nell'aria per raggiungere temperature che con la combustione
More informationECO/S low pressure manual spray gun ECO/S pistola manuale a bassa pressione
LOW PRESSURE MANUAL SPRAY GUN / PISTOLE MANUALI A BASSA PRESSIONE ECO/S low pressure manual spray gun ECO/S pistola manuale a bassa pressione ECO/S spray gun Nozzle size : 1.1-1.3-1.5-1.7-1.9-2.2 (Replace
More informationTermostati, Guaine, Contaore, Orologi programmatori, Regolatori tiraggio, Valvole di miscela, Valvole di zona, Motori, Centraline di Regolazione
INDICE GENERALE TABLE OF CONTENTS Gruppo 1 Componenti per centrali termiche e caldaie Gruppi riempimento, Riduttori di pressione, Valvole di sicurezza, intercettazione combustibile, scarico termico e sfogo
More informationPOMPE ROTOMEC. ELETTROPOMPE SOMMERGIBILI Submersible pumps. IMPIEGO - Application. DESCRIZIONE - Description. DATI ELETTRICI - Electric data
POMPE ROTOMEC ELETTROPOMPE SOMMERGIBILI Submersible pumps UNI EN ISO 9-8 serie 5 TR.6 H (m) GIRANTE VORTEX - Vortex impeller 96 Giri / - R.P.M. Curve secondo ISO 996 Liv: (P).... 5 5 6 7 5 5 l/sec Q m³/h
More informationCISA Safe Home. Locks for shutters and security grates
CISA Safe Home Locks for shutters and security grates Find out more at: cisacasasicura.com 25 mm EXTENDED BOLT STROKE 25 MM The extended bolts are capable of a stroke of 25 mm and engage deeper in the
More informationRev. 4 2006. Pag. TRECCIATO.. 1 Braided. SPIRALATO... 19 Spiral. TESSILE.. 33 Textile. TERMOPLASTICO.. 47 Thermoplastic. SPECIALI..
Rev. 4 2006 Tubo Idraulico Hydraulic hose Pag. TRECCIATO.. 1 Braided SPIRALATO... 19 Spiral TESSILE.. 33 Textile TERMOPLASTICO.. 47 Thermoplastic SPECIALI.. 73 Special ACCESSORI.. 79 Accessories Trecciato
More informationSerrature da infilare a doppia mappa
Serrature da infilare a doppia mappa Serrature da infilare a doppia mappa Serrature da infilare per porte metalliche Mortice locks for metal doors Serrature da infilare a doppia mappa Serrature da infilare
More informationBRASS FITTINGS FOR THREADED PIPES
03/14 BRASS FITTINGS GENERAL FEATURES The brass fittings for threaded pipes are used as junctions for pipelines with threaded connection UNI ISO 228/1. The thread dimensions are subdivided in various types
More informationSOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
More informationThermostatic actuator RAVK - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVK can be combined with: - 2-way valves RAV-/8, VMT-/8, VMA, or - 3-way valves
More informationSpin Monocomando lavabo/bidet
Spin Spin Spin Monocomando lavabo/bidet LAVABO ZX3201-ZX3202 BIDET ZX3331 Maniglia completa R97116 Complete handle Cartuccia completa R98103.8123 Complete cartridge Ghiera e coprighiera R98182 Lock-nut
More informationTurbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
More information