VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90
|
|
|
- Justin Watkins
- 10 years ago
- Views:
Transcription
1 ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90 ISO nbr LRC QMS issued by L.R.Q.A. ATEX nbr issued by B.V. PED nbr COV /01 issued by L.R.V. ISO nbr I /1-/2 issued by TÜV On request S.I.L. 3 According to IEC On request FIRE SAFE According to ISO ISO-FT FULL BORE ACCORDING TO ISO CONSTRUCTION ACCORDING TO: DIN 3202 M3 ANSI B ISO BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 WEB SITE:
2 ISO 9001:2008 by L.R. VALVOLA A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 CONSTRUCTION ACCORDING TO: DIN 3202 M3 - ANSI B16.34 ISO ACCOPPIAMENTO VALVOLA ATTUATORE CONNECTION VALVE ACTUATOR ACCOUPLEMENT ROBINET- ACTIONNEUR ZUSAMMENBAU KUGELHAHN ANTRIEB POSIZIONI OTTENIBILI OBTAINABLE POSITIONS POSITIONS OBTENIBLES MÖGLICHE STELLUNGEN ISO-5211
3 N * 5* * DESCRIZIONE BESCHREIBUNG CORPO BODY CORPS KÖRPER GHIERA INSERT EMBOUT GEWINDEDRUCKRING ANELLO SEAL ANNEAU DICHTUNGSRING SEDE SEAT SIEGE SITZRING SFERA BALL BOULE KUGEL DISPOSITIVO ANTISTATICO ANTISTATIC DEVICE CONTACT ANTISTATIQUE ANTISTATIK VORRICHTUNG STELO STEM TIGE SPINDEL BUSSOLA STEM SEAL JOINT TIGE UNTERE SPINDELABDICHTUNG 10* PACCO A V CHEVRON RINGS JOINT A V 3 FACHE DACHMANSCHETTE MATERIALI MATERIALS MATERIAUX WERKSTOFFE N P.T.F.E. 13 P.T.F.E. (BAM CERTIFIED) 14 R.P.T.F.E. (OPTIONAL) ASTM A /304L ASTM A351 CF8 15 ASTM A351 CF8M 21 ASTM A /304L P.T.F.E. 24 P.T.F.E. / GRAFITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHIT DESCRIZIONE BESCHREIBUNG PREMIBUSSOLA PRESSING BUSH PRESSE RONDELLE STOPFBUCHSDRUCKRING MOLLE A TAZZA SPRING WASHERS RONDELLES BELLEVILLE TELLERFEDERN VITE DI FERMO E FERMO PIN AND STOP PIN PLOT ET PLOT D ARRET ANSCHLAGBOLZEN DADO CONTRODADO NUT LOCK NUT ECROU CONTRE-ECROU MUTTER KONTERMUTTER LEVA WRENCH LEVIER HANDHEBEL GHIERA INSERT EMBOUT GEWINDEDRUCKRING ANELLO SEAL 22* ANNEAU DICHTUNGSRING GHIERA INSERT EMBOUT GEWINDEDRUCKRING MATERIALI MATERIALS MATERIAUX WERKSTOFFE ASTM A C72/50Cr V4 X5CrNi17.7 or X12CrNi17.7 UNI UNI 3951 A2-70 UNI S ASTM A AISI 1010 ASTM A P.T.F.E. GALVANIZED - GALVANIZED - GALVANIZED GALVANIZED * RICAMBI CONSIGLIATI RECOMMENDED SPARE PARTS PIECES DE RECHANGE CONSEILLEES ERSATZTEIL EMPFEHLUNG DIMENSIONI DIMENSION DIMENSIONS ABMESSUNGEN ¼ ⅜ ½ ¾ 1 1¼ 1½ 2 2½ A B C E F M5 M5 M5 M5 M5 M5 M6 M6 ISO F03 F03 F03 F03 F03 F03 F05 F05 G H L 24,5 24, , ,5 51,5 60,5 M P 21,5 21, , R S T PN ~Kg 1,5 1,5 2,3 3,1 4,4 6,2 9,5 15 DATI E CARATTERISTICHE SOGGETTI A VARIAZIONI SENZA PREAVVISO SPECIFICATIONS SUBJECT TO MODIFICATION WITHOUT PRIOR NOTICE TOUS DROITS DE MODIFICATION RESERVES KONSTRUKTIONSÄNDERUNGEN VORBEHALTEN Ø ¼ ⅜ SEAT IN R.P.T.F.E. ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ [email protected]
4 ½ 2 ISO 9001:2008 by L.R. VALVOLE A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 VIE" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN EXECUTION 4-12 EXECUTION 6-16 STANDARD OPTIONAL INDICATORE DI FLUSSO FLOW INDICATOR ONLY FOR VALVES DN 50 SEE TABLE 23 FOR OF THREAD FORO DI BILANCIAMENTO BALANCING HOLE TROU DE BALANCEMENT DRUCKENTLASTUNGSBOHRUNG AVAILABLE ON DN 40 -STELO ANTI ESPULSIONE -TIGE ANTIEXPULSION -ANTI BLOW OUT STEM -AUSBLASGESICHERTE WELLE BREVETTO PATENTED PACCO A V -JOINT A V ANTISTATIC DEVICE -CHEVRON RINGS -3 FACHE DACHMANSCHETE ANTISTATIK VORRICHTUNG BS MANIGLIA OVALE - OVAL HANDLE -LEVIER OVAL HANDHEBEL IN OVALFORM - O RING STELO O RING ON STEM -TIGE AVEC O RING - O RING IM SPINDELBEREICH
5 CERTIFY ISO 9001:2008 ISO 9001:2008 by L.R. VALVOLE A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 VIE" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS BESCHREIBUNG -PROLUNGA STELO -STEM EXTENSION -TIGE PROLONGEE -SPINDELVERLÄNGERUNG -PARTICOLARI INOX -STAINLESS STEEL DETAILS -ACCESSOIRES EN INOX -EDELSTAHLTEILE -ATTACCO ISO -SYSTEM ISO - ISO CONNECTIONS -ANSCHLSS ISO AQUILA EAGLE AIGLE ADLER FIRE SAFE ISO ISO-FT (BS 6755 / API 607) -SFERA CONTENUTA CONTENTS BALL - BOULE CONTENUE -NICHT RAUSRAGENDE KUGEL -FORO DI SCARICO NELLA SFERA -OVERPRESSURE HOLE INTO BALL -TROU DECOMPRESSION DANS LA BOULE -ENTLASTUNGSBOHRUNG IN DER KUGEL -ANELLO CONTENUTO CONTAINED SEAL -ANNEAU CONTENU -DICHTRING GEKAMMERT GHIERA A BATTUTA -METAL BEATING RING -EMBOUT AVEC BATTUE MECANIQUE -METALLISCHER ANSCHLAG DES GEWINDEDRUCKRINGS - SERVIZIO CRIOGENICO CRYOGENIC SERVICE - SERVICE CRYOGÉNIQUE - TIEFTEMPERATUR SERVICE ADLER UNA GAMMA COMPLETA PRIVILEGIANDO LA QUALITA A COMPLETE RANGE PRIVILEGING THE QUALITY
6 Threads/i nch (n) Designation of thread size Number of threads in 25.4 mm Pitch Height of thread Major Pitch Minor Nominal Turns of thread Turns of thread Max. Min. For nominal gauge length For maximum gauge length For minimum gauge length Turns of thread Diameter tolerance on parallel internal threads IN ACCORDANCE TO ISO CARATTERISTICHE DEL FILETTO THREAD FEATURES FILETAGES CARACTÉRISTIQUES GEWINDE KENNDATEN Diameters of gauges plane Gauges length (external threads) Tolerance ±t 1 /2 Tolerance on position of gauge plan on internal thread Tolerance ±t 1 /2 Length of useful external thread not less than Fitting allowance P h d d 2 d 1 2) 2) 2) ¼ 19 1,337 0,856 13,15 12,30 11,44 6 1,3 1 7,3 4,7 1,7 1 ¼ 9,7 11 8,4 3,7 2 ¾ ±0,104 3/8 19 1,337 0,856 16,66 15,80 14,95 6,4 1,3 1 7,7 5,1 1,7 1 ¼ 10,1 11,4 8,8 3,7 2 ¾ ±0,104 ½ 14 1,814 1,162 20,95 19,79 18,63 8,2 1, ,4 2,3 1 ¼ 13, ,4 5 2 ¾ ±0,142 ¾ 14 1,814 1,162 26,44 25,27 24,11 9,5 1,8 1 11,3 7,7 2,3 1 ¼ 14,5 16,3 12,7 5 2 ¾ ±0, ,309 1,479 33,24 31,77 30,29 10,4 2,3 1 12,7 8,1 2,9 1 ¼ 16,8 19,1 14,5 6,4 2 ¾ ±0,180 1 ¼ 11 2,309 1,479 41,91 40,43 38,95 12,7 2, ,4 2,9 1 ¼ 19,1 21,4 16,8 6,4 2 ¾ ±0,180 1 ½ 11 2,309 1,479 47,80 46,32 44,84 12,7 2, ,4 2,9 1 ¼ 19,1 21,4 16,8 6,4 2 ¾ ±0, ,309 1,479 59,61 58,13 56,65 15,9 2,3 1 18,2 13,6 2,9 1 ¼ 23,4 25,7 21,1 7,5 3 ¼ ±0,180 IN ACCORDANCE TO ANSI B Nominal Pipe Size O.D. of Pipe (D) Pitch of threads (P) Pitch diam. at beginning of external thread (E 0 ) Handtight engagement Effective thread, external Length 2 (L 1 ) Diam. 3 Length 4 (L 2 ) Diam. 5 inch threads (E 1 ) inch threads (E 2 ) ¼ 0, , , ,2278 4,1 0, , , /8 0, , , ,240 4,32 0, , ,63750 ½ 0, , , ,320 4,48 0, , ,79179 ¾ 1, , , ,339 4,75 0, , , ,315 11,5 0,0896 1, ,400 4,6 1, , , ¼ 1,660 11,5 0,0896 1, ,420 4,83 1, , , ½ 1,900 11,5 0,0896 1, ,420 4,83 1, , , ,375 11,5 0,0896 2, ,436 5,01 2, , ,31630 ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ [email protected]
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7-1 ANSI B1.20.1 NPT S.W. B.W.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA ANSI B 16.10 PASSAGGIO VENTURI
ISO 9001:2008 by L.R. ANSI 300 NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK:
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING:
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE GAS ISO 7 ANSI B1.20.1 NPT
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2
VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO TOTALE 120. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA ANSI B 16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B 16.10 SPLIT BODY
VALVOLE A SFERA ANSI B 16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B 16.10 SPLIT BODY
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING:
ISO 9001:00 by L.R. PED DIR. 97/3/EC by L.R. ISO 154 by TÜV FA NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf
OMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia
1 OMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia Italy Ph: +39 0308900145 Fax: +39 0308900423 www.omal.it
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
CATALOGO TECNICO TECHNICAL CATALOGUE
VALVOLE DI SICUREZZA A MEMBRANA DIAPHRAGM SAFETY RELIEF VALVES CATALOGO TECNICO TECHNICAL CATALOGUE Valvola di sicurezza a membrana, femmina/femmina Diaphragm safety relief valve, female/female threads
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
R u b i n e t t i s o t t o l a v a b o
R u b i n e t t i s o t t o l a v a b o A n g l e v a l v e s ART. 3000 / 3001 ART. 3025 / 3026 senza filtro out filter Rubinetto sottolavabo a vitone con filtro e dado (alto o basso) filter and nut (long
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
VALVOLA THOR: SPLIT BODY 3 vie 4 guarnizioni THOR VALVE: SPLIT BODY 3 way 4 seals
VALVOLA THOR: SPLIT BODY 3 vie 4 guarnizioni THOR VALVE: SPLIT BODY 3 way 4 seals 167 FEATURES & BENEFITS Si evitano cariche elettrostatiche che potrebbero essere causa d'innesco in ambienti infiammabili
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
SKU: BV4262. Industrial PVC-U Screwed BSP Ball Valve
SKU: BV4262 PVC-U Screwed BSP Ball Valve PVC-U Geschraubt BSP Kugelventil Válvula de bola roscadas BSP PVC- U 1/2" 2" PVC-U Double Union Ball Valve 1/2 " - 2" PVC-U Doppel Union Kugelhahn 1/2" - 2 " Válvula
POMPE ROTOMEC. ELETTROPOMPE SOMMERGIBILI Submersible pumps. IMPIEGO - Application. DESCRIZIONE - Description. DATI ELETTRICI - Electric data
POMPE ROTOMEC ELETTROPOMPE SOMMERGIBILI Submersible pumps UNI EN ISO 9-8 serie 5 TR.6 H (m) GIRANTE VORTEX - Vortex impeller 96 Giri / - R.P.M. Curve secondo ISO 996 Liv: (P).... 5 5 6 7 5 5 l/sec Q m³/h
BALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
Guide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
VALVOLE A SFERA, DI SCARICO OLIO, DI SICUREZZA, A SARACINESCA, RACCORDI BALL VALVES, OIL DRAIN VALVES, SAFETY VALVES, FITTINGS. Capitolo 6 Chapter 6
VALVOLE A SFERA, DI SCARICO OLIO, DI SICUREZZA, A SARACINESCA, RACCORDI BALL VALVES, OIL DRAIN VALVES, SAFETY VALVES, FITTINGS Capitolo 6 Chapter 6 Art. 226 Valvola a sfera con tappo Ball valve with plug
SISTO-16TWA/HWA/DLU. Type Series Booklet
Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents
Self-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
High CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458
LESER UK Bristol [email protected] LESER Germany Hamburg and Hohenwestedt [email protected] André Ramseyer AG Flamatt, Switzerland [email protected] LESER China Tianjin, Beijing, Shanghai and Shenzhen [email protected]
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
DOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
RPS. Sanitary sampling valves SAMPLING
Sanitary sampling valves SAMPLING CHARACTERISTICS The fully autoclavable sampling valves are designed for aseptic sampling of liquids and pharmaceutical products. Made entirely in AISI 316L, the standard
valvole 16 mm ad azionamento pneumatico pneumatically piloted valves - 16 mm
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
Compact. Performance. Safety Relief Valves Serie 437 Serie 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Serie 437 Serie 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Order Code for GEA Tuchenhagen VESTA Sterile Valves. Type H_A 2/2 Way Seat Valve
Order Code for VESTA Sterile Valves Type H_A 2/2 Way Seat Valve engineering for a better world GEA Mechanical Equipment VESTA Sterile Valves are designed for universal use in sterile process technology.
Bimetal thermometer Model 52, industrial series
Mechanical temperature measurement Bimetal thermometer Model 52, industrial series WIKA data sheet TM 52.01 for further approvals see page 6 Applications A wide range of applications in machine building,
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
TUBO E RACCORDI MULTISTRATO UNI 10954-1
TUO E RCCORDI MULTISTRTO MIXL RCCORDI PRESSRE PER TUO MIXL CrIMP FITTINGs FOr MIXL PIPE Raccordo diritto intermedio Intermediate coupling COD. CL /pz VS0130501 RXP1 14x2 H 14x2 H 10 5,13 VS0175003 RMP1
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
PN 10 - Art. A020 TIS PN 16 - Art. A021 TIS
- Art. A00 TIS - Art. A0 TIS SARACINESCA CUNEO GOMMATO / CORPO PIATTO / SHORT EN - SERIE DN G K D L H n-d b M S Peso Weight 0 0 0 0 -ø -ø 00. 0 0 -ø -ø 00. 0 -ø -ø. 0 00 0 -ø -ø. 0 0 0 0 -ø -ø. 0 00 -ø
Linear Luminaire for Fluorescent Lamps Series EXLUX 6001
> As wall, ceiling and pendant light fitting or side entry lamp > Version with 2 lamps: 18 W, 36 W and 58 W > Central locking > All-pole disconnection by means of an N/C switch when the lamp is opened
CDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
TRI CLAMP PRESSURE REGULATORS
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 [email protected] www.idinsertdeal.com TRI CLAMP PRESSURE REGULATORS Stainless steel AISI 316L pressure regulators with clamp
6720808203 (2013/06) No
Ersatzteilliste Spare parts list Liste des pièces de rechange Lista parti di ricambio 6720808203 (2013/06) No DEENFRIT KS RR2 26.06.2013 1 6720808203 26.06.2013 2 6720808203 26.06.2013 3 6720808203 Inhaltsverzeichnis
GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
COPRIM - ITALY VALVOLE A FARFALLA IN ACCIAIO PN16 STEEL BUTTERFLY VALVES - VANNE PAPILLON EN ACIER ISPESL 0100 PED
VAVOE A FARFAA IN ACCIAIO PN16 STEE BUTTERFY VAVES VANNE PAPION EN ACIER COPRIM ITAY CARATERISTICHE Features Caracteristiques Pressione massima Max pressure Pression max: 8 bar Temperatura Temperature
2CP. Twin-impeller pumps PERFORMANCE RANGE INSTALLATION AND USE APPLICATION LIMITS OPTIONALS AVAILABLE ON REQUEST CONSTRUCTION AND SAFETY STANDARDS
2CP Twin-impeller pumps PERFORMANCE RANGE Flow rate up to 40 l/min (27 m³/h) Head up to 112 m APPLICATION LIMITS Manometric suction lift up to 7 m Liquid temperature between -10 C and +90 C Ambient temperature
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
RMT RMT RMT RMT Works Area: Lifting Equipment: Machinery: Assembling:
Company Profile RMT operates in field of manufacturing steel valves of high technology for oil, gas petrochemical and power generation. RMT is located in Italy in the town of Solbiate Olona, just north
Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
Working Pressure up to 630 bar / 9135 PSI
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30 / 931 630 / 9135
SCHEDA TECNICA ESSICCATOI 55/75 55/75 TUMBLE DRYER TECHNICAL DATA SHEET
SCHEDA TECNICA ESSICCATOI 55/75 55/75 TUMBLE DRYER TECHNICAL DATA SHEET MODELLO MODEL CAPACITA 1/20 e 1/25 CAPACITY 1/20 and 1/25 INVERSIONE REVERSE ACTION DIAMETRO CESTO DRUM DIAMETER PROFONDITA CESTO
Series 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.
Type 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas
The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external
MFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
Kämmer Series 185000 Laboratory Valves
flowserve.com Kämmer Series 185000 Laboratory Valves Description Kämmer microflow series 185000 / 285000 and 187000 / 287000 are ½" laboratory valves designed for precision controlling. The bodies in stainless
Fisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
series 5350 5351 Materials Body: 1/2, 3/4 and 1 : dezincification resistant alloy brass EN 12165 CW617N
Pre-adjustable pressure reducing valves with self-contained cartridge - series CCREDITED ISO 9 FM ISO 9 No. CLEFFI / GB replaces / GB Function Pressure reducing valves are devices which, when installed
Nozzle Check Valves. NOREVA nozzle check valves are used
Nozzle Check Valves NOREVA nozzle check valves are used in applications where the reverse flow of a fluid has to be avoided. These valves are suitable for all kind of liquid and gaseous fluids and fire
Pressure & Flame Protection
Pressure & Flame Protection Safety Relief Valves Safety Relief Valves WB SERIES SPRING LOADED SAFETY RELIEF VALVES The WB is designed safely relieve excess pressure in pumps, pipework, tanks, calorifiers,
Stainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
HTM PUMPS PP-PVDF Non-metallic mag drive centrifugal pumps
HTM S PP-PVDF Non-metallic mag drive centrifugal pumps POMPE HTM PP-PVDF Pompe centrifughe in materiale termoplastico FEATURES: Materials in contact with the liquid: Casing and impeller: PP/PVDF; O-ring:
FlowPak TM General Application Valve 1/2-4, Class 150
FlowPak TM General Application Valve 1/2-4, Class 150 SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital Positioner Type Logix 5si,
valvole 16 mm ad azion. meccanico e manuale mechanically and manually actuated valves - 16 mm
mechanically and manually actuated valves - 6 mm Valvole a spola 3/2-5/2 con attacchi filettati G/8 3/2-5/2 spool valves with G/8 threaded ports Spessore della valvola: 6 mm Valve thickness: 6 mm Installazione
VALVOLA DI SICUREZZA A PRESSIONE E DEPRESSIONE PRESSURE AND VACUUM RELIEF VALVE
COSTRUZIONI MECCANICHE LUPI S.r.l. Via Cancelliera, 27-00040 -Ariccia (RM) Tel: +39-06-9343444 / Fax: +39-06-9343256 E-mail: [email protected] www.lupicm.it VALVOLA DI SICUREZZA A PRESSIONE E DEPRESSIONE
Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow
PRESSURE REDUCING VALVES
0E0-GB PRESSURE REDUCING VAVES MAIN FEATURES The pressure reducing valve is able, by varying its pressure drops, to hold the downstream pressure of the fluid at a constant level against changes in the
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
ACCESSORI - ACCESSORIES ZUBEHÖRE - ACCESSOIRES - ACCESORIOS
Controflange - Counterflanges Gegenflansche - Contre-Brides - Bridas Utilizzabile per i modelli Attacco Codice Suitable for models Connection mm Code STYLE 0,5-1-2-3-4-6-8 1/2 95 0507509515/12 ACS 2 1/2
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special
BAF BALL VALVES CATALOGUE
BAF BALL VALVES CATALOGUE for best invalvement 1 BAF BALL VALVES CATALOGUE Index About BAF Valves 3 Certificates 4 BAF Companies 5 Features 6 Applications 6 BAF Floating Ball Valves 7 Part list 8 Pressure
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
VDL 53 - Vacuum drying oven for flammable solvents
Vacuum drying ovens VDL 53 - Vacuum drying oven for flammable solvents The VDL series ensures maximum safety when drying organic solvents in accordance with TÜV/GS guidelines. The interior chamber is designed
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Raccordi per tubi flessibili Fittings for flexible pipes
Raccorderia RACF Raccordi per tubi flessibili Fittings for flexible pipes LP RACF V Z.B E 48 MATERIALE / MATERIAL V: O: TRATTAMENTO / TREATMENTS Z: Raccordo zincato / Galvanized fitting K: Nichelatura
Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Baumann 24000SB Barstock Control Valve
Instruction Manual 24000SB Valve Baumann 24000SB Barstock Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 3 Installation... 3 Air Piping... 4 Disassembly...
FDX 2 Loncin Complessivo Macchina
Loncin Complessivo Macchina 0/50-2/70-2/200 Frame and Chassy (Assembly) 6525 03 Pump BXD 3025G 2/70 7 3605 0092 Vite Speciale Special Screw M8x45 4 6525 035 Pump BXD 3530G 2/200 8 28 0004 Rondella Washer