Rotary cam switches GX series Planet-SWITCH Planet-DIN Planet-LOGIC

Transcription

1 Rotary cam switches GX series Planet-SWITCH Planet-DIN Planet-LOGIC % electricity

2 Rotary cam switches GX series Compact and finger safe (IP2 protection of contacts). Designed according to the latest technology in the switching device field and made of the best quality materials, these cam switches are characterised by high breaking capacity, long life (both mechanical and electrical), installation ease as well as compact size. The contacts are dual breaking and made of silver alloy. The terminals have cross-slotted captive screws and are self releasing. GX rotary cam switches can be used for isolation, motor control in AC3 and AC23 duties and electromagnetic load switching, AC5 duty. start disconnect switch reverse Available in four different ratings, 6, 2, 32 and 4A, and an assortment of versions. % electricity Front mounting version. Type: GX U. Pages 4 to 6. Door coupling version. Types: GX O68 GX O78. Page 8. Door-coupling version with red/yellow padlock handle system. Types: GX O88 GX 98. Page 8.

3 Front mounting version with red/yellow padlock system. Types: GX U25 GX U65. Page 7. Key operation version for 22mm central fixing. Type: GX U2. Page 7. Front-mounting version with handle operation for 22mm central fixing. Type: GX U. Page 7. Enclosure version with padlockable rotating handle. Type: GX P25. Page. Enclosure version Type: GX P. Page. Modular DIN rail mount version. Type: GX O48. Page 9. ORDER CODE STRUCTURE: G X U O RATING SCHEME VERSION OPTIONALS 6 A 2 A 32 A 4 A See page 2 U = front mounting O = door coupling See pages 4 to 8 Example of switch mounting for version U Example of switch mounting for version O

4 4 Rotary cam switches GX Series electric U version front mounting. ON/OFF switches AC size pkg ON/OFF SWITCHES. One-pole wafer scheme 9. GX6 9 U GX2 9 U GX32 9 U GX4 9 U Two-pole wafer scheme 9. GX6 9 U GX2 9 U GX32 9 U GX4 9 U Three-pole 2 wafers scheme. GX6 U GX2 U GX32 U GX4 U Four-pole 2 wafers scheme 92. GX6 92 U GX2 92 U GX32 92 U GX4 92 U General characteristics - 6 to 4A rated thermal current Ith ratings - Extended mechanical and electrical life - Switching angles: 3, 45, 6 and 9 - Silver-alloy dual-breaking contacts - IP4 front degree of protection (for IP65, see Optional below); IP2 protection of contacts - Operating temperature: -25 to +55 C - Legend marking is standard supplied as illustrated in the order code table; any other on request. Certifications and compliance Certifications obtained: culus. Compliant to standards: IEC/EN , IEC/EN 624-, IEC/EN Selection guide See page 4. Optional IP65 protection front plate: Add 5 at the end of the order code E.g. GX6 92 U 5. Enlarged front plate for GX6-GX2 (65x65mm instead of standard 48x48): Add H after the switch rating in the order code E.g. GX6H U. Enlarged front plate for GX32-GX4 (9x9mm instead of standard 65x65): Add H after the switch rating in the order code E.g. GX32H U. Example of U version switch mounting Accessories page page 2 Wiring diagrams page 3 Technical characteristics page 4

5 electric Rotary cam switches GX Series 5 U version front mounting. Changeover switches with position. Changeover switches without position AC size pkg CHANGEOVER SWITCHES WITH. One-pole wafer scheme 5. GX6 5 U GX2 5 U GX32 5 U GX4 5 U Two-pole 2 wafers scheme 52. GX6 52 U GX2 52 U GX32 52 U GX4 52 U Three-pole 3 wafers scheme 53. GX6 53 U GX2 53 U GX32 53 U GX4 53 U Four-pole 4 wafers scheme 75. GX6 75 U GX2 75 U GX32 75 U GX4 75 U CHANGEOVER SWITCHES WITHOUT. One-pole wafer scheme 54. GX6 54 U GX2 54 U GX32 54 U Two-pole 2 wafers scheme 55. GX6 55 U GX2 55 U GX32 55 U Three-pole 3 wafers scheme 56. GX6 56 U GX2 56 U GX32 56 U Four-pole 4 wafers scheme 69. GX6 69 U GX2 69 U GX32 69 U General characteristics - 6 to 4A rated thermal current Ith ratings - Extended mechanical and electrical life - Switching angles: 3, 45, 6 and 9 - Silver-alloy dual-breaking contacts - IP4 front degree of protection (for IP65, see Optional below); IP2 protection of contacts - Operating temperature: -25 to +55 C - Legend marking is standard supplied as illustrated in the order code table; any other on request. Certifications and compliance Certifications obtained: culus. Compliant to standards: IEC/EN , IEC/EN 624-, IEC/EN Selection guide See page 4. Optional IP65 protection front plate: Add 5 at the end of the order code E.g. GX6 75 U 5. Enlarged front plate for GX6-GX2 (65x65mm instead of standard 48x48): Add H after the switch rating in the order code E.g. GX6H 52 U. Enlarged front plate for GX32-GX4 (9x9mm instead of standard 65x65): Add H after the switch rating in the order code E.g. GX32H 52 U. Example of U version switch mounting Accessories page page 2 Wiring diagrams page 3 Technical characteristics page 4

6 6 Rotary cam switches GX Series electric U version front mounting. Motor switches Order Ith Max Front Q.ty Wt. code AC power plate per AC23A size pkg [A] [] [mm] n [kg] MOTOR SWITCHES. Reversing switches. Three-pole 3 wafers scheme. GX6 U GX2 U GX32 U GX4 U Pole-changing switches. 4 wafers scheme 3. GX6 3 U GX2 3 U GX32 3 U GX4 3 U Star-delta switches. 2 wafers scheme 2. GX6 2 U GX2 2 U Y GX32 2 U GX4 2 U pole motor reversing switches with spring return to. 3 wafers scheme 26. GX6 26 U GX2 26 U GX32 26 U General characteristics - 6 to 4A rated thermal current Ith ratings - Extended mechanical and electrical life - Switching angles: 3, 45, 6 and 9 - Silver-alloy dual-breaking contacts - IP4 front degree of protection (for IP65, see Optional below); IP2 contact degree of protection - Operating temperature: -25 to +55 C - Legend marking is standard supplied as illustrated in the order code table; any other on request. Certifications and compliance Certifications obtained: culus. Compliant to standards: IEC/EN , IEC/EN 624-, IEC/EN Selection See page 4. Optional IP65 protection front plate: Add 5 at the end of the order code E.g. GX6 U 5. Enlarged front plate for GX6-GX2 (65x65mm instead of standard 48x48): Add H after the switch rating in the order code E.g. GX6H U. Enlarged front plate for GX32-GX4 (9x9mm instead of standard 65x65): Add H after the switch rating in the order code E.g. GX32H U. Example of U version switch mounting U version front mounting. Voltmeter switches. Ammeter switches AC size pkg VOLTMETER SWITCHES. Phase-Neutral L-N/L2-N/L3-N 2 wafers scheme 68. GX6 68 U LN L2N L3N Phase-Phase L-L2/L2-L3/L3-L 2 wafers scheme 67. GX6 67 U L-L L2-L3 L3-L For 3 phase to phase voltage and 3 phase voltage readings 3 wafers scheme 66. GX6 66 U L-L2 L-N L2-L3 L3-L L2-N L3-N For phase voltage and 3 phase to phase voltage readings 3 wafers scheme 6. GX6 6 U LN L-L L2-L3 L3-L General characteristics - 6A capacity rating - Extended mechanical and electrical life - Switching angles: 3, 45, 6 and 9 - Silver-alloy dual-breaking contacts - IP4 front degree of protection (for IP65, see Optional below); IP2 contact degree of protection - Operating temperature: -25 to +55 C - Circuit schemes on page 2 - Legend marking is standard supplied as illustrated in the order code table; any other on request. Certifications and compliance Certifications obtained: culus. Compliant to standards: IEC/EN , IEC/EN 624-, IEC/EN Selection See page 4. Optional IP65 protection front plate: Add 5 at the end of the order code E.g. GX6 U 5. Enlarged front plate for GX6 (65x65mm instead of standard 48x48): Add H after the switch rating in the order code E.g. GX6H U. Example of U version switch mounting AMMETER SWITCHES. Direct L-L2-L3 current readings 5 wafers scheme 97. GX6 97 U L3 L2 L For L-L2-L3 readings via 3 CTs 3 wafers scheme 98. GX6 98 U L3 L2 L Accessories page page 2 Wiring diagrams page 3 Technical characteristics page 4

7 electric Rotary cam switches GX Series 7 U version front mounting with handle operation, for central 22mm fixing. ON/OFF switches U2 version front mounting with key operation, for central 22mm fixing. ON/OFF switches AC size pkg ON/OFF SWITCHES. One-pole wafer scheme 9. GX6 9 U 6.97 Two-pole wafer scheme 9. GX6 9 U 6. Three-pole 2 wafers scheme. GX6 U 6.6 Four-pole 2 wafers scheme 92. GX6 92 U 6.8 AC size pkg ON/OFF SWITCHES. One-pole wafer scheme 9. GX6 9 U Two-pole wafer scheme 9. GX6 9 U General characteristics - 6 to 4A rated thermal current Ith ratings - Extended mechanical and electrical life - Switching angles: 3, 45, 6 and 9 - Silver-alloy dual-breaking contacts - IP4 front degree of protection (for IP65, see Optional below); IP2 protection of contacts - Operating temperature: -25 to +55 C - Legend marking for U and U2 versions is only for reference while for U25 and U65 types standard supplied as illustrated in the order code table; any other on request. Certifications and compliance Certifications obtained: culus. Compliant to standards: IEC/EN , IEC/EN 624-, IEC/EN Selection See page 4. Optional IP65 protection front plate: Add 5 at the end of the order code E.g. GX6 92 U 5. Enlarged front plate for GX6-GX2 (65x65mm instead of standard 48x48): Add H after the switch rating in the order code E.g. GX6H U25. Enlarged front plate for GX32-GX4 (9x9mm instead of standard 65x65): Add H after the switch rating in the order code E.g. GX32H U25. Example of U25-U65 switch mounting Three-pole 2 wafers scheme. GX6 U Four-pole 2 wafers scheme 92. GX6 92 U U25-U65 versions front mounting with red/yellow padlock system. ON/OFF switches AC size pkg ON/OFF SWITCHES. Three-pole 2 wafers scheme. GX6 U GX2 U GX32 U GX4 U Four-pole 2 wafers scheme 92. GX6 92 U GX2 92 U GX32 92 U GX4 92 U Accessories page page 2 Wiring diagrams page 3 Technical characteristics page 4

8 8 Rotary cam switches GX Series electric O88-98 versions door coupling with red/yellow padlock system. ON/OFF switches O68-78 versions door coupling. ON/OFF switches AC size pkg ON/OFF SWITCHES. Three-pole 2 wafers scheme. GX6 O GX2 O GX32 O GX4 O Four-pole 2 wafers scheme 92. GX6 92 O GX2 92 O GX32 92 O GX4 92 O AC size pkg ON/OFF SWITCHES. Three-pole 2 wafers scheme. GX6 O GX2 O GX32 O GX4 O Four-pole 2 wafers scheme 92. GX6 92 O GX2 92 O GX32 92 O GX4 92 O General characteristics - 6 to 4A rated thermal current Ith ratings - Extended mechanical and electrical life - Switching angles: 3, 45, 6 and 9 - Silver-alloy dual-breaking contacts - IP4 front degree of protection (for IP65, see Optional below); IP2 contact degree of protection - Operating temperature: -25 to +55 C - Suitable for screw fixing or mounting on 35mm DIN rail (EN 522) - Legend marking is standard supplied as illustrated in the order code table; any other on request. Certifications and compliance Certifications obtained: culus. Compliant to standards: IEC/EN , IEC/EN 624-, IEC/EN Selection See page 4. Optional IP65 protection front plate: Add 5 at the end of the order code E.g. GX Enlarged front plate for GX6-GX2 (65x65mm instead of standard 48x48): Add H after the switch rating in the order code E.g. GX6H O88. Enlarged front plate for GX32-GX4 (9x9mm instead of standard 65x65): Add H after the switch rating in the order code E.g. GX32H O88. Example of O version switch mounting Accessories page page 2 Wiring diagrams page 3 Technical characteristics page 4

9 electric Rotary cam switches GX Series 9 O48 version modular, 35mm DIN rail mounting. ON/OFF switches. Changeover switches. Voltmeter switches. Ammeter switches AC size pkg ON/OFF SWITCHES. One-pole 3 wafers scheme 9. GX6 9 O Two-pole 3 wafers scheme 9. GX6 9 O Three-pole 3 wafers scheme. GX6 O Four-pole 3 wafers scheme 92. GX6 92 O General characteristics - 6A rated thermal current Ith ratings - Extended mechanical and electrical life - Switching angles: 3, 45, 6 and 9 - Silver-alloy dual-breaking contacts - IP4 front degree of protection ; IP2 contact degree of protection - Operating temperature: -25 to +55 C - Suitable for screw fixing or mounting on 35mm DIN rail (EN 522) - Legend marking is standard supplied as illustrated in the order code table; any other on request. Certifications and compliance Certifications obtained: culus. Compliant to standards: IEC/EN , IEC/EN 624-, IEC/EN Selection guide See page 4. CHANGEOVER SWITCHES WITH. One-pole 3 wafers scheme 5. GX6 5 O Two-pole 3 wafers scheme 52. GX6 52 O Three-pole 3 wafers scheme 53. GX6 53 O Four-pole 4 wafers scheme 75. GX6 75 O VOLTMETER SWITCHES. Phase-Neutral L-N/L2-N/L3-N 3 wafers scheme 68. GX6 68 O48 LN 6.5 L2N L3N Phase-Phase L-L2/L2-L3/L3-L 3 wafers scheme 67. GX6 67 O48 L-L2 6.5 L2-L3 L3-L For 3 phase to phase voltage and 3 phase voltage readings 3 wafers scheme 66 GX6 66 O48 L-L2 L-N 6.75 L2-L3 L2-N L3-L L3-N AMMETER SWITCHES. Direct L-L2-L3 current readings 5 wafers scheme 97. GX6 97 O L3 L2 L For L-L2-L3 readings via 3 CTs 4 wafers scheme 98. GX6 98 O L3 L2 L Accessories page page 2 Wiring diagrams page 3 Technical characteristics page 4

10 Rotary cam switches electric GX Series P version in enclosure with rotating handle. On/Off switches. Changeover switches Orde code Rated Housing Qty Wt current size per AC pkg ON/OFF SWITCHES. Three poles - scheme. GX6 P 6 9x9.26 GX2 P 2 9x9.26 GX32 P 32 x.44 GX4 P 4 x.44 ON/OFF SWITCHES. Four poles - scheme 92. GX6 92 P 6 9x9.26 GX2 92 P 2 9x9.26 GX32 92 P 32 x.44 GX4 92 P 4 x.44 CHANGEOVER SWICTHES. Three poles - scheme 53. GX6 53 P 6 9x9.26 GX2 53 P 2 2 9x9.26 GX32 53 P 32 x.44 GX4 53 P 4 x.44 CHANGEOVER SWICTHES. Four poles - scheme 75. GX6 75 P 6 9x9.26 GX2 75 P 2 2 9x9.26 GX32 75 P 32 x.44 GX4 75 P 4 x.44 General characteristics 6 to 4A rated thermal current ratings Extended mechanical and electrical life Switching angles: 3, 45, 6 and 9 Silver-alloy dual-breaking contacts IP65 degree of protection Operating temperature: -25 to +55 C Top and bottom entry: 4 PG6 threaded knockouts for 9x9mm types and 4 PG2 for xmm Legend marking is standard supplied as illustrated in the order code table; any other on request. Certifications and compliance Certifications obtained: culus. Compliant to standards: IEC/EN , IEC/EN 624-, IEC/EN Selection guide See page 4. P version in enclosure with rotating handle. Motor switches Order Ith Max Housing Qty Wt. code AC power size per AC23A pkg [A] MOTOR SWITCHES. Three-pole reversing switches - scheme. GX6 P x9.27 GX2 P x9.27 GX32 P 32 5 x.482 GX4 P x.482 P version in enclosure with padlockable rotating handle. On/Off switches Orde code Rated Housing Qty Wt current size per AC pkg. ON/OFF SWITCHES. Three poles - scheme. GX6 P25 6 9x9.33 GX2 P25 2 9x9.33 GX32 P25 32 x.43 ON/OFF SWITCHES. Four poles - scheme 92. GX6 92 P25 6 9x9.34 GX2 92 P25 2 9x9.34 GX32 92 P25 32 x.44 Accessories page page 2 Wiring diagrams page 3 Technical characteristics page 4

11 electric Rotary cam switches Accessories for GX series Accessories for GX switches 7 AO4-7 AR4-7 AR24 7 AR24-7 AR224 7 APRBP Order Description Q.ty Weight code per pkg n. [kg] Black operating handle❶. 7 AO4 48x48mm front plate.5 7 AR4 65x65mm front plate. 7 AR24 9x9mm front plate.5 Black operating lever❶. 7 AR24 65x65mm front plate.9 7 AR224 9x9mm front plate.38 Adjustable door-coupling extension shaft. 7mm long max❶. 7 APRBP For GX6 to GX4.27 IP4 face plates❶. GX M 48x48mm blank face plate. GX M2 65x65mm blank face plate.27 IP4 face plates with legend plates. GX M5 48x48mm blank face plate.3 with legend plate GX M6 65x65mm blank face plate.29 with legend plate Padlockable handles❶. GX A 48x48mm yellow/red.3 padlockable handle for GX6-GX2 GX AH 65x65mm yellow/red.47 padlockable handle for GX6-GX2 GX A 65x65mm yellow/red.47 padlockable handle for GX32-GX4 ❶ Also suitable for GN series. GX M - GX M2 GX M5 - GX M6 GX A - GX AH - GX A

12 2 [mm] electric Rotary cam switches GX series Front mounting A B H -5 Type A B C D E F G H K M N D D2 L [mm] wafer 2 wafers 3 wafers 4 wafers 5 wafers 6 wafers GX6 U GX6 U ❶ N GX2 U D C GX2 U ❶ GX32 U E L M G F GX32 U ❶ GX4 U GX4 U ❶ ❶ Padlockable handle D2 D Door coupling O version L S -5 E K M P D DIN35 EN52 N C A D D2 D G F D2 Type A C D E F G K M N O P S D D2 GX6 O GX6 O88 48 ❶ GX2 O GX2 O88 48 ❶ GX32 O GX32 O88 65 ❶ GX4 O GX4 O88 65 ❶ L [mm] wafer 2 wafers 3 wafers 4 wafers 5 wafers 6 wafers ❶ Padlockable handle. Mounting in enclosure Type N of wafers Enclosure Protection Cable glands L L size A A C C D F M N L L degree GX GX x IP65 4 PG 6 GX GX x IP65 4 PG PG Flush mounting Ø 22mm Flush mounting Ø 22mm Modular mounting -5-5 L DIN35 EN522 Ø 22.5 L Ø 22.5 L Type L [mm] wafer 2 wafers 3 wafers 4 wafers GX Type L [mm] wafer 2 wafers 3 wafers 4 wafers GX Type L [mm] 3 wafers 4 wafers 5 wafers GX

13 electric Wiring diagrams Rotary cam switches. Circuit schemes One-pole ON/OFF switch 9 - Two-pole ON/OFF switch - Three-pole ON/OFF switch 92 - Four-pole ON/OFF switch 5 - -pole changeover switch with pole changeover switch with Number of wafers: Switching angle: 6 Number of wafers: Switching angle: 6 Number of wafers: 2 Switching angle: 6 Number of wafers: 2 Switching angle: 6 Number of wafers: Switching angle: 6 Number of wafers: 2 Switching angle: pole changeover switch with 75-4-pole changeover switch with pole changeover switch without 55-2-pole changeover switch without pole changeover switch without 2 Number of wafers: 3 Switching angle: 6 Number of wafers: 4 Switching angle: 6 Number of wafers: Switching angle: 9 Number of wafers: 2 Switching angle: 9 Number of wafers: 3 Switching angle: pole changeover switch without - 3-pole reversing switch 3 - Pole-changing switch with (Dahlander) Number of wafers: 4 Switching angle: Star-delta switch Number of wafers: 3 Switching angle: 6 Number of wafers: 4 Switching angle: Reversing switch, spring return to Y 2 Number of wafers: 4 Switching angle: 6 Number of wafers: 3 Switching angle: Pole-changing switch with reversing (Dahlander) 2 2 Number of wafers: 6 Switching angle: Ammeter switch direct reading or via current transformer 68 - Phase-neutral voltmeter switch 67 - Phase-phase voltmeter switch L3 L LN L2N L3N L-L2 L2-L3 L3-L L2 Number of wafers: 5 Switching angle: 9 Number of wafers: 2 Switching angle: 3 Number of wafers: 2 Switching angle: Phase-phase phase-neutral voltmeter changeover 6 - Changeover switch phase phase-neutral, 3 phase-phase voltages 98 - L-L2-L3 current changeover switch L-L2 L-N L2-L3 L2-N L3-L L3-N LN L-L2 L2-L3 L3-L L3 L2 L Number of wafers: 3 Switching angle: 3 Number of wafers: 3 Switching angle: 3 Number of wafers: 3 Switching angle: 9

14 4 Technical characteristics electric Rotary cam switches SELECTION GUIDE The choice of a rotary cam switch and the relative type are based on the functional diagram and the type of application as well. IEC standards provide a comprehensible and quick classification of the most frequent utilisation categories: AC: Connection and disconnection of non-inductive or slightly inductive loads (cosϕ.95) AC2: Resistance furnaces AC3: Starting and switching off motors during running AC23A: Switching of motor loads or other highly inductive loads AC5: Control of electromagnetic loads For DC applications, the rotary cam switches are used for the switching of minor loads or in control circuits, such as: DC3: Control of electromagnets DC2A: Switching of resistive loads DC23: Switching of highly inductive loads Other prescriptions and recommendations concerning the use of cam switches as auxiliary equipment of electrical machines are given in IEC/EN 624- standards and specifically as given under utilisation. UTILISATION MAIN SUPPLY DISCONNECTING SWITCH WITH EMERGENCY-STOP OPERATION: Red operating handle with yellow background Lockable in open position (OFF). EMERGENCY-STOP SWITCH Red operating handle with yellow background Independent operation and the breaking of the load circuit of switching devices before the opening of its main contacts Rated capacity is to sufficient in order to break the sum of the rated operating currents of all the connected equipment Breaking capacity equal to the current of the largest motor when stalled (locked rotor) together with the total of the normal running currents of the other motors or loads. MAIN SUPPLY DISCONNECTING SWITCH Used to disconnect all live electrical equipment from the power supply circuit Contact clearance distance is to comply with IEC/EN standards Provided with a means in order to be locked in the OFF position Selection of current breaking according to AC and AC2 utilisation categories. Operational characteristics ❶ Valid for systems with earthed neutral, overvoltage category III, pollution degree 3. TYPE Rated insulation voltage ❶ Ui IEC/EN UL/CSA V V Rated impulse withstand voltage ❶ Uimp IEC/EN kv Rated thermal current Ith IEC/EN A Maximum fuse size for short-circuit protection ka A Ie (gg) 25kA A 5kA A 63kA A Short-time withstand current Icw sec A Rated operational current Ie AC/AC2A (IEC/EN) A V A AC5 (IEC/EN) 22/23V 38/4V 66/69V A A A Motor power for switches in AC utilisation categories AC3 (IEC/EN) 22-24V 3 phases 38-44V 5-69V phase (2 poles) V 22/24V 38/44V AC23A (IEC/EN) 22/24V 3 phase 38/44V 5/69V phase (2 poles) V 22/24V 38/44V DOL motor powers for switches (UL/CSA) 2V Hp 3 phase 24V 48V 6V Hp Hp Hp Mechanical life cycles Conductor cross section max. r/f 2-mm 2 2-AWG r: rigid min. r/f f: flexible 2-mm 2 2-AWG GX6... GX2... GX32... GX x 6 5x 6 5x 6 5x 6 2.5/ /2.5 /6 /6 4/4 4/4 8/ 8/.5/.5.5/.5.5/.5.5/.5 2/2 2/2 6/6 6/6

15 Rotary cam switches, GX series Special circuit scheme form D A 9 3 C B Plate pos. indication C D 2 A 2 3 B Front plate 2 Type: X X X X X X X Overlapping Closed contact Open/ Closed Spring contacts in 2 or more passing contact return positions contact Date: Scheme: Customer:

16 new 24 Mini-contactors, BGF series Joysticks, push-push and triple-touch buttons Digital multimeters DMK2, DMK25 and DMK5 series Current transformers, DM...T series Planet-SWITCH Motor protection circuit breakers Switch disconnectors Contactors Motor protection relays Electromechanical starters Push-buttons and selectors Position and safety switches Rotary cam switches Planet-DIN Modular contactors Time relays Protection relays Level controls Earth leakage relays Planet-LOGIC Digital metering instruments and current transformers Soft starters AC motor drives Automatic power factor regulators Automatic battery chargers Automatic transfer switches The products described in this documentation are subject to be revised or improved at any moment. Catalogue descriptions and details, such as technical and operational data, drawings, diagrams and instructions, etc., do not have any contractual value. In addition, products should be installed and used by qualified personnel and in compliance with the regulations in force for electrical systems in order to avoid damages and safety hazards. AC motor drives, VFS series Automatic power factor regulators LOVATO ELECTRIC S.P.A. CONTROL SOLUTIONS FOR INDUSTRY Via Don E. Mazza GORLE BG, Italy Tel info@lovatoelectric.com Sales Department: Tel Fax PD GB 7 4 % electricity