1 SAFETY & DISCONNECT SWITCHES

Transcription

1 POWER PRODUCT Safety & Disconnect es Contents - Safety es Air Conditioning Disconnects - Safety Guide Form Specifications - Feature Comparison -6 Enclosure Types -7 ing System -8 General Duty Safety es Plug Fuse Enclosed Type, /2V FusibleSelection -9 A Special Application Type, 2V Non-FusibleSelection - General Duty esfeatures - 2V Fusible and Non-FusibleSelection - Heavy Duty Safety es Heavy Duty esfeatures -2 2V FusibleSelection - 0V FusibleSelection -4 0V Non-FusibleSelection - Type 4/4X and 2 with Viewing WindowSelection -6 Special Applications Safety es 4-Pole and 6-PoleSelection -7 Interlocked ReceptacleSelection -8 AccessoriesGeneral and Heavy Duty es Class R Fuse Clips -9 Class J Fusing -9 Class T Fuse Adapter Kits -9 Neutral Kits -9 0% Neutral Kits -9 Fuse Puller Kits -9 Auxiliary Contacts - Copper Lug Kits - Equipment Ground Kits - Isolated Ground Kits - Interchangeable Hubs -2 Compression Lug, Neutral Barrier Kits -2 Lugs and Wire Ranges -2 Multiple Padlocks -2 VBII Safety Replacement Parts -22 Dimensions and Weights General and Heavy Duty es Type and R Knockout Diagrams Pole and 6-Pole Dimensions -29 Cross Reference and Replacement Parts for SE and ID es - - Double-Throw es Selection -2 Accessories - Dimensions -4 Enclosed Rotary Disconnect es - -6 SAFETY & DISCONNECT

2 POWER PRODUCT Safety & Disconnect es SAFETY & DISCONNECT Contents - Disconnect es Compact Non-Fusible es Rotary and Toggle Selection -7-9 Dimensions and Wire Ranges - Type VBII (-0A) Features and Ordering Information -4 and Handle Selection -42 Accessories Dimensions and Lug Wire Ranges -4 Type MCS (-0A) es, Fuse, and No Fuse KitSelection -46 Handle Operators and Accessories -47 Type CFS Compact Fusible es Features and Ordering Information -48 and HandleSelection -49 Accessories & Handle Selection - Dimensions and Technical Characteristics - Type HCP board Units Selection and accessories -2 Dimensions -

3 Safety es Non-Fused Air Conditioning Disconnects Selection 2V Non-Fused Disconnect cul listed, Type R enclosure Maximum Horsepower Disconnect Type Std. Pkg. SAFETY WN Non-Fused Pullout 6 Features b Ample Wiring Space b Rugged Design b Numerous Knockouts b Raised Mounting Embosses b Copper Conductors b Pullout b Removable Door Benefits b The larger enclosure allows for ample wiring space. b Manufactured with powder coated G90 galvanized steel for fade, scratch and corrosion resistance b All (6) knockouts are easy to remove. The sidewall knockouts provide access from the sides of the device. Every knockout has /2", /4" and " provisions. b (4) Raised mounting embosses keep the unit away from the wall, preventing dirt build-up. The upper mounting hole is shaped to be used as a hanger. b Copper current carrying part allows for a cooler, longer lasting operation. b The pullout switch design allows you to safely and easily de-energize the load terminals. b The easily removable door makes it possible to wire the device with absolutely no interference. Dimensions - Inches* Non-Fused R x Wiring Diagram Pullout Disconnect LOAD Bonded LINE Neutral LOAD LINE Removable Door Wire Range Table Connector Copper Aluminum Solid Standard Solid Standard Line #4-8 #4- #2-8 #2- Load #4-8 #4- #2-8 #2- Neutral #2-8 #2-2 #2-8 #2-2 Equip Grnd. #2-8 #2-2 #2-8 #2-2 * For inches/millimeters conversion, multiply inches by.4. Siemens Canada Limited Power Product -

4 Safety es Fused Air Conditioning Disconnects SAFETY Selection 2V Fused Disconnect cul listed, Type R enclosure Maximum Horsepower Fuse Class WF H 6 WF H 6 Std. Pkg. Features b Ample Wiring Space b Rugged Design b Numerous Knockouts b Raised Mounting Embosses b Copper Conductors b Pullout b Removable Door Benefits b The larger enclosure allows for ample wiring space. b Manufactured with powder coated G90 galvanized steel for fade, scratch and corrosion resistance b All (6) knockouts are easy to remove. The sidewall knockouts provide access from the sides of the device. Every knockout has /2", /4" and " provisions. b (4) Raised mounting embosses keep the unit away from the wall, preventing dirt build-up. The upper mounting hole is shaped to be used as a hanger. b Copper current carrying part allows for a cooler, longer lasting operation. b The pullout switch design allows you to safely and easily de-energize the load terminals. b The easily removable door makes it possible to wire the device with absolutely no interference. Dimensions - Inches* Fused 0.87 MAX THRU THRU 9.09 Wiring Diagram KNOCKOUT Fuse Block LOAD LINE Bonded Neutral LOAD LINE Removable Door Wire Range Table Connector Copper Aluminum Solid Standard Solid Standard Line #4-8 #4- #2-8 #2- Load #4-8 #4- #2-8 #2- Neutral #2-8 #2-2 #2-8 #2-2 Equip Grnd. #2-8 #2-2 #2-8 #2-2 * For inches/millimeters conversion, multiply inches by Siemens Canada Limited Power Product

5 Type VBII Safety es Guide Form Specifications Product Overview Application Short Circuit Withstand s General Duty Heavy Duty Double Throw General Duty es are intended for applications where reliable performance and continuity of service are needed, but where duty requirements are not severe and usual service conditions prevail. (These switches are intended for use primarily with supply circuits rated 2V AC or less where the available fault current is less than,000a when used with Class R or T fuses or,000a max. when used with Class H fuses.) Suitable for use on systems capable of delivering not more than,000 RMS symmetrical amperes of fault current as follows: Sw. AIC Protective Device -0A,000 Circuit Breaker -0A,000 Class H Fuse -0A,000 Class R Fuse -0A,000 Class J or T Fuse Heavy Duty es are intended for use in applications where:. Rugged construction, reliable performance, continuity of service and ease of maintenance are emphasized, or 2. Available fault currents higher than,000a are likely to be encountered, such as in manufacturing plants, mass production industries, and commercial, institutional and other large buildings served by network systems or transformers of higher capacities.. System voltage is 0V AC or DC Max. 4. A Type 2 or 4/4X enclosure is required. Double throw switches are intended to transfer loads from one power source to another. All double throw switches are CSA certified. es are rated for use on systems with an available fault current of up to,000 AIC when protected with Class H fuses or 0,000 AIC when protected with Class R, J or Class T fuses. They can also be used to connect a single source of power to either of two loads. In this application it is necessary to field modify fusible switches so that the fuses are on the load side of the switching mechanism. Suitable for use on systems capable of delivering not more than 0,000 RMS symmetrical amperes of fault current as follows: Sw. & Tpye AIC Protective Device All Heavy Duty & DT,000 Circuit Breaker -0A HD & DT,000 Class H Fuse -0A HD 0,000 Class R, J or T Fuse -0A DTFC & DTNFC DT 0,000 Class R, J or T Fuse 800 & A HD 0,000 Class L or T Fuse SAFETY Fuses Fusible switches will accept the following CSA class fuses: LF - A max plug Fuses -0A GD Class H & K, Class R with kit -0A GD Class J-move base -0A GD Class T with kit Fusible switches will accept the following CSA class fuses: -0A HD Class H & K, Class R with kit -0A, 0V HD Class J-move base -0A, 2V HD Class J-move base -0A HD Class T with kit 0-0A HD Class T-move bases 800-A HD Class L, Class T with kit Fusible switches will accept the following CSA class fuses: -0A DT - Class H & K, Class R with kit & A 0V DT - Class J-move base -0A DT - Class J-move base, Class T with kit 0-0A DT - Class J-standard, Class T-move bases Cover Interlocks Specifications Voidable cover interlocks on switches prevent the switch door from being opened when in the ON position. No cover interlock on plug fuse type switches. Voidable dual cover interlocks standard on all heavy duty switches. Prevents cover from being opened when switch is in the ON position and prevents switch from being turned ON when door is opened. CSA certified under file #246 as enclosed switches. Fusible switches also suitable as service entrance when neutral bonded to the enclosure is installed. Meets CSA C22.2 No.4 Enclosed es. Dual cover interlocks standard on all double throw switches. Prevents cover from being opened when switch is in the ON position and prevents switch from being turned ON when door is opened. CSA certified under file #246 as enclosed switches. Meets CSA C22.2 No.4 Enclosed switches. Seismic Qualifications Groundable Neutral (All neutrals are bondable for service entrance use.) Padlocks Meet NEMA standard KS--0 for type GD switches. Meet NEMA standard KS--0 for type HD switches. Meet NEMA standard KS--0 type HD for DT switches. All GD & HD switches and DT type double throw switches have been tested and comply with the California Building Code (CBC) and with the 09 International Building Code (IBC) - Compliance Level SDS =.8 g Fusible switches have groundable neutral blocks factory installed. Padlockable cover latch. OFF padlock provisions on handle. All switches (both Fusible and Non-Fusible) are either supplied with factory installed neutrals or accept field addable neutrals. Padlockable cover latch and multiple OFF padlock provisions on handle. All 2- pole DT will accept field addable neutrals. Padlockable cover latch and multiple OFF padlock provisions on handle. HP & Load Break s All General Duty, Heavy Duty and Double Throw es are both load break and horsepower rated. The protective device can either be a fuse installed in a fusible switch or an upstream fuse or circuit breaker protecting a non-fusible switch. The ampere rating of the upstream protective device must not exceed the switch ampere rating. Class T kit available for 2V max. applications on A switches. Siemens Canada Limited Power Product -

6 Feature Comparison Product Overview SAFETY General Heavy Double Features / Duty Duty Throw s b b b thru 0 Amps b 800 and Amps b b b 2 Volt AC b b 0 Volt AC b b b 2 Volt DC b 0 Volt DC b b b Double-break visible blade design (-0A) b b b Quick-make, quick-break switching action b b b Highly visible ON/OFF handle indication b Handle design for hook stick operation b b b Padlockable cover latch b b b Padlockable handle b b Single voidable cover interlock b b Dual voidable cover interlock b b b Type enclosure b b b Type R enclosure b Type 2 enclosure b Type 4/4X enclosures b b b Generous wiring gutters that meet CSA and CEC wire-bending space requirements b b b Lugs suitable for copper or aluminum at or 7 C b b b CU/AL wire lugs that meet CSA C22.2 No.6-0 requirements b b Suitable for field-convertible compression connectors b b b All plated copper current carrying parts (except lugs) b b b Spring reinforced Fuse Clips (except A general duty) b b Clear pivoting line terminal shield b b b Replacement parts b Field addable 0% neutral b b b Provisions for CSA Class T, R and H Fuses b b Provisions for CSA Class J and L Fuses b b Metal nameplate -0A b b Aux. switch kits b Type 4X with stainless steel interior parts b b Rolled flange enclosure design (-0A) b b Isolated ground kits on in operation off Double Break ing Action Like the time-proven Vacu-Break Design, the Siemens VBII double break switching action breaks the arc in two places in -0A ratings. This reduces heat generation and increases switching speed by doubling the breaking distance. The result is enhanced performance and increased longevity. We also provide the most visible blade design available today. Unlike conventional knife blade switches, the blades are self-aligning to ensure positive contact. In addition, they have no wear and friction point since the electrical hinge has been eliminated. The result is a very fast, positive and reliable switching action for even the most severe applications. 0, 0V & 0A fusible, double-throw switches accept only Class J or T fuses. Only 800 & A HD switches will accept Class L fuses. A general duty switches have fuse clips constructed of spring type copper. Not supplied on A outdoor & plug fuse switches. -0A Type VBII in stainless steel enclosures. -0A. 0A general duty switches have aluminum neutral assemblies. -0A GD, -0A DT and -A HD switches will accept Class T fuses. -6 Siemens Canada Limited Power Product

7 Safety es General Duty and Heavy Duty Product Overview Enclosure Types h A Type enclosures are intended for indoor use primarily to provide protection against contact with the enclosed equipment in locations where unusual service conditions do not exist. h B Type R enclosures are intended for outdoor use primarily to provide a degree of protection against falling rain and sleet and must remain undamaged by the formation of ice on the enclosure. They are not intended to provide protection against conditions such as dust, internal condensation, or internal icing. h C Type 4, 4X enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against windblown dust, rain, splashing water and hose-directed water. They are not intended to provide protection against conditions such as internal condensation or internal icing. Also meets 4X definition by providing a high degree of protection against corrosion. Siemens -0A stainless steel 4X switches are supplied stainless interior parts and hardware as standard. h D Type 4 enclosures are intended for indoor or outdoor use primarily to provide a degree of protection against windblown dust, rain, splashing water and hose-directed water. They are not intended to provide protection against conditions such as internal condensation or internal icing. h E Type 2 enclosures are intended for indoor use primarily to provide a degree of protection against dust, falling dirt and dripping water. They are not intended to provide protection against conditions such as internal condensation. h A hb SAFETY Load Break s All Siemens safety switches are load break rated. The load break rating is assigned by CSA after the switching unit has successfully performed the following tests: of ON/OFF of Operations Operations With Without per Minute Current Current Total Horsepower s All Siemens safety switches, where appropriate, are horsepower rated. The assignment of such ratings is made by CSA only after the switching unit has undergone testing to determine its acceptability which includes repeated interruption of the locked rotor current of the motor for which it is to be rated as follows: Max HP of ON/OFF of Cycles Operations per minute of Operation 6 0 h C h D Non- Fusible Safety AIC s When Protected by a Circuit Breaker Breaker Frame Non-Fused Short Circuit Current NEG, NGB, ED4 DT (2V) 8 ka Thru 2 VAC NEB, NEG, NGG, -A GD & DT (2V) 8 ka Thru 2 VAC NGB, ED4 NEB, NEG, NGG, -A HD & DT (0V) 8 ka Thru 480 VAC NGB, ED4 ED6 -A HD & DT (0V) 8 ka Thru 0 VAC FD6-A, JD6-A 0A HD & DT (0V) 8 KA Thru 0 VAC JD6-A, LD6-A 0A DT (2V) 8 ka Thru 2 VAC JD6-A, LD6-A 0A HD & DT (0V) 8 ka Thru 0 VAC LD6-A 0A DT (2V) ka Thru 2 VAC LD6-A 0A HD & DT (0V) ka Thru 0 VAC NNG A HD (0V) ka Thru 0 VAC VBII Type 2 switches are also rated R & S for outdoor use. Type R is defined in B above. S rated enclosures provide a degree of protection against windblown dust and allow operation when the enclosure is ice laden. All switches above are rated at KA when protected by any CSA certified or cul Listed CB Circuit breaker trip rating must not exceed switch ampere rating h E Siemens Canada Limited Power Product -7

8 SAFETY ing System Type VBII Safety ing System H F C 6 4 N R CH Type L = General Duty k AIC Max. (Plug Fused & A Max Non-Fused) G = Gen. Duty H = Heavy Duty DT = Double Throw Product Overview Special Applications With: CH = Crouse-Hinds Receptacle W = Viewing Window Fused or Non-Fused F = Fused NF = Non-Fused C = Built to meet Canadian requirements of Poles = 2 = 2 = 4 = 4 6 = 6 Voltage = V or /2V 2 = 2V 6 = 0V Enclosure Type Omit = Type, Indoor R = Type R, Outdoor S = Type 4/4X, Stainless Steel J = Type 2, Industrial With or Without Neutral Omit = Less Neutral N = With Neutral s = A 2 = A = A 4 = 0A = 0A 6 = 0A 7 = 800A 8 = A Type VBII Accessories ing System H R 6 4 Type H = Heavy Duty G = General Duty Accessory Type A = Auxiliary /NO and /NC A2 = Auxiliary 2/NO and 2/NC A = Auxiliary Low Current CL = Compression Lug Barrier / Mounting Kit G = Ground Lug Kit G2 = Insulated Ground Lug Kit LC = Copper Lug Kit NC = Neutral NC2 = 0% Neutral P = Fuse Puller Kit R = Class R - Fuse Clip Kit T = Class T - Fuse Kit s = A 2 = A 2 = /A = A 2 = /A 2 = //A 24 = ///0A 4 = 0A 6 = 0/0A 678 = 0/0/800/A 78 = 800/A Maximum Voltage 2 = 2V Max 6 = 0V Max -8 Siemens Canada Limited Power Product

9 General Duty Enclosed es Plug Fuse and A Special Application Type Features b CSA Certified under file #246 b Compact size b Horsepower rated b Indoor and outdoor enclosures b Quick make-quick break mechanism b Visible ON - OFF indications b Padlock-off handle feature b Door padlock provision b All fusible switches suitable for use as service entrance equipement b Bondable neutral (where indicated) b Lugs suitable for copper or aluminum wire b es accept plug fuses only - fuses not included b Hubs see page -2 b Lugs see page -2 b Ground Bar Kit: GSGK b Knockout diagrams see page -26 and -27 Selection SAFETY Dimensions - in. (mm) Enclosure Type Height Width Depth 8 4 (2) 2 () (76) R 8 4 (2) 8 (7) 8 (79) Wire Range Table Type /2 Volt Fusible Amp /2 Volt Non-Fusible Amp Wire Range #4 AWG - #8 AWG Al/Cu #4 AWG - # AWG Al/Cu Indoor Type Outdoor Type R Ship. Wt. (lbs.) /2 Volt Fusible -Pole and Solid Neutral Ship. Wt. (lbs.) Pkg. of Horsepower s -Phase, 2-Wire Standard Maximum Volt -Phase, 2-Wire LFCN.6 /2 2 2-Pole and Solid Neutral /2 Volt 2-Phase, -Wire LFC2N. LFC2NR /2 2 2 Volt Non-Fused 2-Pole Special Application 2 Volt -Phase, 2-Wire LNFC222R Dual horsepower ratings: Std. applies when non-time delay plug fuses are installed. Max applies when time-delay plug fuses are installed. Has service entrance label. CSA certified as "Enclosed es" (suitable for use as service equipment where indicated). Bottom cable entry and exit only. No hub provision supplied. GSGK is included and factory installed. Line lugs are CSA approved for #4 to #6 Cu/Al cable. Siemens Canada Limited Power Product -9

10 General Duty Safety es Features (-0A) Product Overview SAFETY Cover interlock 2. Tangential knockouts through 0A for easy conduit lineup. Quick-make, quick-break operating mechanism that ensures positive operation 4. Provisions for T, R, J, H, and K class fuses (T & J -0A). Generous wiring gutters that meet or exceed CEC wire-bending space requirements 6. Visible blade, double-break switch action 7. Positive 2 or point mounting 8. Highly visible red handle grip 9. Informative door labeling which includes replacement parts list. Handle and cover padlocking provisions. Side-hinged door that opens 80 degrees for easier wiring 2. A unique enclosure design that adds rigidity and strength. Its rolled edge prevents cuts and scrapes to conductors and to installer s hands - Siemens Canada Limited Power Product

11 General Duty Safety es Selection SAFETY System 2 Volt Fusible Indoor Type 2-Pole, 2-Fuse, and Solid Neutral 0 GFC22N GFC222N GFC22N GFC224N Ship. Wt. (lbs.) Std. Pkg Horsepower s 2V AC -Phase, 2-Wire 2-Phase, 4-Wire -Phase, -Wire 2 Volt DC Std. Max. Std. Max. Std. Max. Std. /2 2 Volt AC/2 Volt DC -Pole, -Fuse, and Solid Neutral 2 Volt AC/2 Volt DC 0 GFC2N GFC22N GFC2N GFC24N /2 Dual horsepower ratings: Std.- applies when non-time delay fuses are installed. Max.- applies when timedelay fuses are installed. These switches are CSA certified for application on grounded B-phase systems. Suitable for use on -phase motor loads. Suitable for use as service entrance when neutral is bonded to the enclosure. switches per standard package. switches per standard package. Siemens Canada Limited Power Product -

12 Heavy Duty Safety es Features SAFETY Quick-make, quick-break operating mechanism that ensures positive operation. 2. Visible blade, double-break switching action.. Arc chutes dissipate heat and prolong switch life. 4. Highly visible red handle grip. Designed for hook stick operation. 2. Unique enclosure design increases rigidity and prevents cuts and scrapes to conductors and installer s hands.. Spring reinforced fuse clips that assure reliable contact for cool operation. 4. Door latch securely holds door closed and allows cover padlocking.. Defeatable dual cover interlock. 6. Center punch provided for field drilling to allow ON padlocking. 7. Handle can be padlocked in the OFF position with up to () padlocks with /6" hasps. 8. Generous top, bottom and side gutters that meet or exceed CEC wire-bending space requirements. 9. Informative door labeling which includes replacement parts list.. Tangential knockouts through 0A for easy conduit lineup.. Side-hinged door that opens past 80 degrees for easier wiring.. Front removable mechanical lugs that are suitable for CU/AI or 7 C conductors. 6. Lugs are field convertible to copper body and to a wide variety of compression connectors. 7. Hinged clear line terminal shield with probe holes for inspecting or testing line side terminals. 8. Embossed aluminum nameplate on Heavy Duty es. 9. Drawn cover for increased rigidity and resistance to abuse.. Top key hole and bottom mounting holes provide easy 2 or point mounting. -2 Siemens Canada Limited Power Product

13 Heavy Duty Safety es Selection SAFETY System Indoor Type Ship. Wt. (lbs.) Std. Pkg. Outdoor Type R Ship. Wt. (lbs.) Std. Pkg. Hub Type Horsepower s 2V AC -Phase, 2-Wire -Phase, -Wire Std. Max. Std. Max. 2 Volt DC 2 Volt Fusible 2-Pole, 2-Fuse and Solid Neutral (Also used for 2-Pole, 2-Wire Applications) 2 Volt AC/2 Volt DC HFC22N HFC222N HFC22N HFC224N HFC2N HFC226N HFC227N HFC228N HFC22NR HFC222NR HFC22NR HFC224NR HFC2NR HFC226NR HFC227NR HFC228NR -Pole, -Fuse and Solid Neutral (Also used for -Pole, -Wire Applications) 2 Volt AC/2 Volt DC Volt Fusible 2-Pole, 2-Fuse 0 HFC2N HFC22N HFC2N HFC24N HFCN HFC26N HFC27N HFC28N HFC2NR HFC22NR HFC2NR HFC24NR HFCNR HFC26NR HFC27NR HFC28NR ECHS ECHV ECHS ECHV Type 4/4X Stainless Type 2 Industrial Hub Type HFC22S HFC222S HFC22S HFC224S HFC22J HFC222J HFC22J HFC224J SSH /2 /2 / Volt AC/2 Volt DC -Pole, -Fuse (Also used for 2-Pole, 2-Wire Applications in 0 800A s) 2 Volt AC/2 Volt DC Type 4/4X Stainless Type 2 Industrial Hub Type HFC2S HFC22S HFC2S HFC24S HFCS HFC26S HFC27S HFC2J HFC22J HFC2J HFC24J HFCJ HFC26J HFC27J SSH * / Built to order. Suitable for use as service equipment when neutral is bonded to the enclosure. Dual horsepower ratings: Std.- applies when non-time delay fuses are installed. Max.- applies when time-delay fuses are installed. These switches are CSA certified for application on grounded B-phase systems and are suitable for -phase motor applications. When a neutral is required use neutral kit displayed on p.-9 Hub catalogue numbers available p. -2 Also rated for Type S/R application. Factory provided drain plug must be removed from the bottom of the enclosure for type S/R application. 4 grade stainless steel. Hub type SSH are suitable for type 4/4X and type 2 applications. * Consult Siemens representant. Siemens Canada Limited Power Product -

14 Heavy Duty Safety es Selection SAFETY System Indoor Type 0 Volt Fusible 2-Pole, 2-Fuse 0 0 -Pole, -Fuse HFC26 HFC262 HFC26 HFC26 HFC266 HFC6 HFC62 HFC6 HFC64 HFC6 HFC66 HFC67 HFC68 Ship. Wt. (lbs.) Std. Pkg HFC26R HFC262R HFC26R HFC26R HFC266R HFC6R HFC62R HFC6R HFC64R HFC6R HFC66R HFC67R HFC68R Outdoor Type R Ship. Wt. (lbs.) Std. Pkg Hub Type ECHS ECHV ECHS ECHV Horsepower s 480V AC 0V AC -Phase, -Phase, -Phase, -Phase, 2-Wire -Wire 2-Wire -Wire Std. Max. Std. Max. Std. Max. Std. Max. 2 Volt DC 0 Volt DC 480 Volt AC/0 Volt AC/0 Volt DC 480 Volt AC/0 Volt AC/2 Volt DC Pole, -Fuse and Solid Neutral HFC6N HFC62N HFC6N HFC64N HFC6N HFC66N HFC67N HFC68N HFC6NR HFC62NR HFC6NR HFC64NR HFC6NR HFC66NR HFC67NR HFC68NR ECHS ECHV 480 Volt AC/0 Volt AC/2 Volt DC Volt Fusible (For 2-Pole Applications use outside poles of -Pole es) 2-Pole, 2-Fuse 0 0 Type 4/4X Stainless Type 2 Industrial Hub Type HFC26S HFC262S HFC26S HFC26S HFC266S 27 6 HFC26J HFC262J HFC26J HFC26J HFC266J 27 6 SSH * 480 Volt AC/0 Volt AC/0 Volt DC -Pole, -Fuse HFC6S HFC62S HFC6S HFC64S HFC6S HFC66S HFC67S HFC68S HFC6J HFC62J HFC6J HFC64J HFC6J HFC66J HFC67J HFC68J SSH * Volt AC/0 Volt AC/2 Volt DC Built to order. -0A -Pole switches are also rated 0V DC. 0V DC & 0V DC horsepower rating shown requires (2) poles to be connected in series. Use -Pole switch for 0A applications. Dual horsepower ratings: Std.- applies when non-time delay fuses are installed. Max.- applies when time-delay fuses are installed. Suitable for use as service equipment when neutral is bonded to the enclosure, except for A when used on 480V or 0V grounded wye system. Hub catalogue number available p.-2 When a neutral is required use neutral kit displayed on p.-9 Also rated for Type S/R application. Factory provided drain plug must be removed from the bottom of the enclosure for type S/R application. 4 grade stainless steel. Hub type SSH are suitable for type 4/4X and type 2 applications. * Consult Siemens representative -4 Siemens Canada Limited Power Product

15 Heavy Duty Safety es Selection SAFETY System Indoor Type Outdoor Type R Horsepower s 0 Volt Non-Fusible 2-Pole 0 0 HNFC26 HNFC262 HNFC26 HNFC26 HNFC266 Ship. Wt. (lbs.) HNFC26R HNFC262R HNFC26R HNFC26R HNFC266R Ship. Wt. (lbs.) Hub Type ECHS ECHV 2 Volt 480 Volt 0 Volt -Phase -Phase -Phase -Phase -Phase -Phase 2V DC 0V DC 480 Volt AC / 0 Volt AC / 0 Volt DC -Pole HNFC6 HNFC62 HNFC6 HNFC64 HNFC6 HNFC66 HNFC67 HNFC HNFC6R HNFC62R HNFC6R HNFC64R HNFC6R HNFC66R HNFC67R HNFC68R ECHS ECHV Volt AC/0 Volt AC/2 Volt DC Volt Non-Fusible 2-Pole Type 4/4X Stainless Type 2 Industrial Hub Type 480 Volt AC / 0 Volt AC / 0 Volt DC 0 0 HNFC26S HNFC262S HNFC26S HNFC26S HNFC266S HNFC26J HNFC262J HNFC26J HNFC26J HNFC266J 4 SSH * -Pole HNFC6S HNFC62S HNFC6S HNFC64S HNFC6S HNFC66S HNFC67S HNFC6J HNFC62J HNFC6J HNFC64J HNFC6J HNFC66J HNFC67J HNFC68J SSH * Volt AC / 0 Volt AC / 2 Volt DC Built to order. Also rated 0V DC. When neutral is required, use neutral kit displayed on p.-9 Use -Pole switch for 0A application. Hub catalogue numbers available p.-2 Also rated for Type S/R application. Factory provided drain plug must be removed from the bottom of the enclosure for type S/R application. 0V DC horsepower rating shown requires (2) poles to be connected in series. 4 grade stainless steel. Hub type SSH are suitable for type 4/4X and type 2 applications. *Consult Siemens representative. Siemens Canada Limited Power Product -

16 SAFETY Heavy Duty Safety es Type 4/4X & 2 with Viewing Window Description 0A, -pole 0V max. in fusible and non-fusible versions in Type 4/4X stainless steel and Type 2 enclosures. All allow viewing of visible blade position. 0A also allow viewing of indicating type fuses. Features b Rugged installer-friendly enclosure design features a gasket flange with continuously welded seams b Tool-free cover latches b Two, three and four point mounting b Metal handle with large insulating grip features a positive stop in both ON and OFF position b Ground lugs provided as standard b Type 2 enclosures are fabricated from galvanized steel and are also rated for R/S outdoor applications b Type 4X stainless steel switches ( 0A) are 4 grade stainless steel and are provided with stainless steel interior parts b The widest range of accessories available including 0% neutrals, gold plated PLC auxiliary contacts and isolated ground kits Selection Maximum Horsepower s System Hub Type Ship. Wt. (lbs.) 2V AC 480V AC 0V AC -Phase, 2-Wire -Phase, -Wire -Phase, -Wire -Phase, -Wire 2V DC 0V DC -Pole, -Wire Fusible, Type 2 (For 2-Pole Applications use outside poles of -Pole es) 0 Volt AC / 2 Volt DC HFC6JW HFC62JW HFC6JW HFC64JW HFC6JW HFC66JW SSH -Pole, -Wire Non-Fusible, Type HNFC6JW HNFC62JW HNFC6JW HNFC64JW HNFC6JW * SSH * Volt AC / 2 Volt DC -Pole, -Wire Fusible, Type 4X Stainless (For 2-Pole Applications use outside poles of -Pole es) 0 Volt AC / 2 Volt DC 0 0 HFC6SW HFC62SW HFC6SW HFC64SW HFC6SW SSH Pole, -Wire Non-Fusible, Type 4X Stainless 0 0 HNFC6SW HNFC62SW HNFC6SW HNFC64SW HNFC6SW * SSH * Volt AC / 2 Volt DC 0A switches are also rated 0V DC. Maximum HP ratings listed apply only when time delay fuses are used. Also rated for Type S/R application. Factory provided drain plug must be removed from the bottom of the enclosure for type S/R application. Suitable for use as service equipment when neutral is bonded to the enclosure. 0V DC horsepower rating shown requires (2) poles to be connected in series. 4 grade stainless steel. * Consult Siemens representative. -6 Siemens Canada Limited Power Product

17 Heavy Duty Safety es Type VBII 4 & 6-Pole Heavy Duty Safety es Application 4 & 6-pole es are commonly used as a disconnecting means for two-speed, two-winding motors. Fused switches provide both over current and short circuit protection. Non-fusible switches normally provide a local disconnection means for twospeed motors which are remote from their motor controller. 4-pole switches are also used in -phase, 4-wire circuits when a switching neutral is required. Description 4 & 6-pole switches are available in -0A ratings and in both fusible and non-fusible versions. 4-pole switches are supplied with either Type or Type2/R enclosures. 6-pole switches are available with either Type 2/R or Type 4X stainless steel enclosures. Standards b cul & UL listed under file #E4776 b Meets UL98 for enclosed switches b Meets NEMA Standard KS- for enclosed switches b Meets CEC wire bending space requirements Features b Visible blade, double break switching action b Highly visible ON/OFF indication b Defeatable dual cover interlock b Padlock option in OFF position b All copper current carrying parts b Tangenital knockouts (Type, 4-pole switches) HNF66S Selection SAFETY 4-Pole Type VBII es Indoor Type Type 2/R Industrial Horsepower s System Ship. Wt. (lbs.) Ship. Wt. (lbs.) Hub Type 2V, 2Ø, 4W 2V Ø 480V, Ø 0V, Ø Std. Max. Std. Max. Std. Max. Std. Max. 2V DC Fusible 0 Volt AC, 2 Volt DC 4-Pole, 4 Fuse 0 HF46 HF462 HF46 HF HF46J HF462J HF46J HF464J SSH Non-fusible 0 Volt AC, 2 Volt DC 4-Pole 0 HNF46 HNF462 HNF46 HNF HNF46J HNF462J HNF46J HNF464J SSH Pole Type VBII es Type 2 Industrial Type 4X Stainless Steel Horsepower s System Ship. Wt. (lbs.) Ship. Wt. (lbs.) Hub Type 2V Ø 480V, Ø 0V, Ø Std. Max. Std. Max. Std. Max. 2V DC Fusible 0 Volt AC, 2 Volt DC 6-Pole, 6 Fuse 0 HF66J HF662J HF66J HF664J HF66S HF662S HF66S HF664S SSH Non-fusible 0 Volt AC, 2 Volt DC 6-Pole 0 HNF66J HNF662J HNF66J HNF664J 7 80 HNF66S HNF662S HNF66S HNF664S 7 80 SSH 7 Built to order. Lugs are aluminum alloy as standard. Optional copper body lugs are available. Dual horsepower ratings: Std. applies when non-time-delay fuses are installed. Max. applies when time delay fuses are installed. Fusible switches accept Class H Fuses as the standard. Class R & J fuses can also be installed and increase the rating from,000 to 0,000 AIC. For Class J, the load base is moved upward. For Class R fuses, rejection kits are required. Supplied with factory installed ground lugs. Hub catalogue number available p. -2 Hub type SSH are suitable for type 4/4X and type 2 applications. Siemens Canada Limited Power Product -7

18 Heavy Duty Safety es Special Application es / Interlocked Receptacle es Selection SAFETY Application Receptacle Safety es provide cord connection protection of heavy-duty portable equipment (welders, infrared ovens, batch feeders, portable conveyors, assembly line fixtures and tools, refrigerator trucks, etc.) under load or fault conditions. Standards All receptacle switches with a viewing window are CSA certified under file #246 and UL listed under file #E4776. Description Type 2 and 4/4X Receptacle Safety es are available with -phase, 4-wire grounded type Crouse-Hinds Arkite, pre-wired and mounted with interlock linkage to the switch mechanism. Insertion or removal of the plug is prevented by the interlock linkage while the switch is in the ON position. Receptacle prevents operation of switch if incorrect plug is inserted. Crouse-Hinds Interlocked Receptacle es Hub Type 2 Type 4/4X Type Shipping Wt. (lbs.) Std. Pkg. Accepts Crouse-Hinds Arktite Plug B D E 0V Fusible, -Pole, -Wire with Viewing Window HF6JCHW HF62JCHW HF6JCHW HF6SCHW HF62SCHW HF6SCHW SSH 0V Non-Fusible, -Pole, -Wire with Viewing Window 24 6 APJ48 & NPJ48 APJ648 & NPJ648 APJ487 & NPJ487 A HNF6JCHW HNF62JCHW HNF6JCHW HNF6SCHW HNF62SCHW HNF6SCHW SSH APJ48 & NPJ48 APJ648 & NPJ648 APJ487 & NPJ487 Receptacle switches dimensions Dimensions - Inches (mm) A B C D E F G G Cr-H Type Fusible (2 & 0V) 4.27 (6) 6.27 (4) 2.96 (8) 7.42 (88) 9.7 (2) 9.6 (24) 9.02 (229).47 29) 2.02 () 6.22 (8) 6.4 (6) 6.80 (72).2 (9).2 (9).2 (9) 6.( ) 6.4 (6) 6. (6) 6.0 (2) 7.4 (88) 7.6 (9) C F Cr-H Type Non-Fused (0V max.) 4.27 (6) 6.27 (4) 2.96 (8) 7.42 (88) 9.7 (2) 9.6 (24) 9.02 (229).47 (29) 2.02 () 6.22 (8) 6.4 (6) 6.80 (72).2 (9).2 (9).2 (9) 6. () 6.4 (6) 6. (6) 6.0 (2) 7.4 (88) 7.6 (9) Arktite is a registered trademark of the Crouse- Hinds Company. Plugs are not sold or supplied by Siemens. Also rated Type R/S. Enclosure is constructed of Type 4 stainless steel. Hub catalogue available p.-2-8 Siemens Canada Limited Power Product

19 General and Heavy Duty Safety es Accessories Selection SAFETY Class R Fuse Clip Kits All General Duty and Heavy Duty es are field convertible to accept Class R Fuse Clip Kits. The kits prevent the installation of Class H and K fuses (one kit required per -pole switch). Class R Fuse Clip Kits GSRK2 HR2 HR62 HR62 HR6 HR64 HR66 Description One kit per pole required. HR62 A, 2V Kit (GD only) A, 2V Kit (HD only) A, 0V Kit/A, 2V Kit A, 0V Kit A Kit 0A Kit 0A/0A Kit Class J Fusing All -0A, 0V and -0A,2V fusible Heavy Duty es are field convertible to accept Class J fuses by moving the load base to a pre-drilled J fuse position. All -0A, 2V fusible General Duty switches can also be field converted to accept Class J fuses. Internal Shield Kits (for fusible switches) Kits provide a clear plastic inner door to prevent accidental contact with live parts. Test probe holes are provided and fuses can be replaced without removal of kit. NEW Internal Shield Kits A HD A HD A HD 0A HD Kit HSK6SSW HSK62SSW HSK6SSW HSK64SSW Class T Fuse Adapter Kits All -0A, General Duty and - A Heavy Duty es are field convertible to accept Class T fuses. 0-0A switches are field convertible to accept Class T fuses by moving the load base to a pre-drilled T fuse position. Class T Fuse Adapter Kits HT2 HT6 HT24 HT64 TFAK72 TFAK7 TFAK82 Description A, 2V Kit A, 0V Kit 0A, 2V Kit 0A, 0V Kit 800A, 2V Kit 800A, 0V Kit A, 2V Kit Neutral Kits Standard Neutral Kits can be field installed in General and Heavy Duty es. Neutral Kits HT6 GD W490 HD, GD HNC62, HD, GD HNC62 0 HNC64 0 & 0 HNC & HNC678 HP6 HNC62 HNC264 0% Neutral Kits CSA certified 0% Neutrals are available on -0A Heavy Duty es. They are typically used with non-linear transformers or where increased neutral ampacity/lug capacity is required. 0% Neutral Kits Wire Range Line & Load Lugs (Cu/Al) HNC26 (2) #4 AWG - /0 AWG 0 HNC264 (2) #6 AWG - 0 Kcmil 0 HNC66 (2) /0 AWG - 7 Kcmil or (4) /0 AWG - 2 Kcmil 0 HNC678 (4) /0 AWG - 7 Kcmil Fuse Puller Kits Fuse Puller Kits are field installable in -A Type VBII Heavy Duty es (one kit required per -pole switch). Fuse Puller Kits Fuse Puller Kit 0 HP6 0 HP62 HP6 Siemens Canada Limited Power Product -9

20 General and Heavy Duty Safety es Accessories Selection SAFETY HLC62 HA624 HA2624 Auxiliary Contacts Auxiliary Contacts are available only for Heavy Duty es. The auxiliary contacts are available in normally open and normally closed or 2 normally open and 2 normally closed configurations. Siemens offers a PLC Auxiliary (- 0A) that has very low resistance for low voltage and current typical in PLC circuits. All auxiliary contacts make after and break before main switch contacts. Auxiliary Contacts Aux. Kit V AC Max. 2V AC Max. 28V DC Max. Horsepower V AC Max. 2V AC Max. With NO & NC Isolated Contacts -0 HA624 /2 /4 0- HA6678 /2 /4 With 2 NO & 2 NC Isolated Contacts -0 HA2624 /4 0- HA26678 /4 Low Current PLC Type with NO & NC Gold Plated Contacts -0 HA624 /2 /4 0- HA6678 /2 /4 HG2624 Copper Lug Kits Heavy duty switches are CSA approved to accept field installed copper lug kits. Copper Lug Kits Copper Lug Description HLC62 (9) Lugs/Kit #4-4 AWG Cu HLC6 (9) Lugs/Kit #4-/0 AWG Cu 0 HLC64 (9) Lugs/Kit #6 AWG-0 Kcmil Cu 0 HLC6678 () Lugs/Kit #/0 AWG-0 Kcmil Cu Isolated Ground Kits Isolated Ground Kits are available on -0A Heavy Duty es. They are normally used on circuits with a high content of computer or other electronic loading which require a ground which is isolated from the building ground and neutral circuits. The kit includes both isolated and grounded terminals as listed below. Isolated Ground Kits of Terminals Wire Range Isolated Grounded Per Terminal (Cu/Al) 0 HG #4-4 AWG 0 0 HG #4-2/0 AWG Equipment Ground Kits Equipment Ground Lug Kits are available for all General and Heavy Duty es. They are field installable in Type and Type R es and are factory installed as standard in Type 4/4X, Type 2 and also in all VBII 4&6-pole es. Equipment Ground Kits of Wire Range Terminals Per Terminal (Cu/Al) A GD GSGK 2 #4-8 AWG 0 GD HG624 2 #4-4 AWG 0 HD HG624 2 #4-4 AWG 0 & 0 HG66 4 #4-2/0 AWG 800 HG678 8 #6 AWG-2 Kcmil - Siemens Canada Limited Power Product

21 General and Heavy Duty Hub and Lug Data Selection SAFETY SSH ECHV0 ECHS0 SL04 Interchangeable Hubs Conduit hubs are available for Type R, 2 and 4 / 4X applications. -0A Type R es are provided with a conduit hub provision and a removable hub plate on their top rainshed. Hubs Conduit Size (inches) Used On Type R Cover ECHA000 /4 ECHA07 ECHA A GD Only /4 ECHA Cover ECHS000 /4 ECHS07 ECHS /4 ECHS 0A /2 ECHS 2 ECHS0 2 /2 ECHS2 2 /2 ECHV2 ECHV0 0 A /2 ECHV 4 ECHV0 Type 4/4X /4 SSH07 SSH /4 SSH 0A /2 SSH 2 SSH0 Note: thru 0A Type R es have removable hub plates on rainshed. 0A and larger Type R es have no provisions for mounting hubs. Drill or punch hole in the field to accommodate hub size desired. Compression Lug Mounting & Neutral Barrier Kit All Heavy Duty es are field convertible for crimp type lugs. When compression lugs are required for -A switches, a neutral barrier kit is required for -Phase, W or -Phase, 4W applications. When compression lugs are required on 0-A switches, lug mounting kits are required. Compression Lug Mounting and Neutral Barrier Kits Kit Description HCL62 Neutral Barrier Kit & HCL62 Neutral Barrier Kit 0 HCL6 0 & & HCL6678 HCL6678 Pole, Compression Lug Mounting Kit Pole, Compression Lug Mounting Kit Pole, Compression Lug Mounting Kit Lugs & A es are suitable for use with or 7 C wire. A are suitable for use with 7 C rated wire. Multiple Padlock Accessory A tamper-proof device to provide for multiple padlocking to meet OSHA or plant requirements. Accepts up to 6 /4 padlocks. Catalog number SL04. Standard Carton-2. Wire Ranges (Line, Load and Standard Neutral) Lug Wire Range GD #4-8 AWG (Cu/Al) HD #4-2 AWG (Cu/Al) #4-2 AWG (Cu/Al) #4-/0 AWG (Cu/Al) 0 #6 AWG-0 Kcmil (Cu/Al) 0 () /0 AWG-7 Kcmil (Cu/Al) or (2) /0 AWG-2 Kcmil (Cu/Al) 0 (2) /0 AWG-7 Kcmil (Cu/Al) or (4) /0 AWG-2 Kcmil (Cu/Al) 800 () /0 AWG-7 Kcmil (Cu/Al) Line Load (4) /0 AWG-7 Kcmil (Cu/Al) neutral (4) /0 AWG-7 Kcmil (Cu/Al) Line Load (4) /0 AWG-7 Kcmil (Cu/Al) neutral Hubs suitable for R es. Also suitable for Type 2 applications. Neutral Barrier kits are required on -A switches only and only with -Phase / W or -Phase / 4W loads. Compression Lugs mounting kits are required on 0- A switches only. Provides mounting for a single line or load lug. Provides mounting for (2) compression lugs per phase on line or load. Line lugs are CSA approved to accept #4-6 CU/Al cable. All 0A Heavy Duty es have a wire range & wire bending space for () #6-0 Kcmil (Cu/Al). All but A GD are also CSA approved for #2 Cu/Al conductors. Siemens Canada Limited Power Product -2

22 General and Heavy Duty VBII Safety Replacement Parts Selection SAFETY VBII Safety Replacement Parts Handle / Handle Guard Line Base Load Base General Duty Heavy Duty Fusible 2- and -Pole -0A General Duty & -A Heavy Duty HD 2V HFB2 HBB2 HH62 GD HFB62 HBB62 GH22 HD 2V HFB22 HBB22 HH62 0V HFB62 HBB62 HH62 0V HFB62 HBB62 HH62 HFB6 HBB6 GH22 HH62 0 HFB64 HBB64 GH24 HH64 0 HFB6 HBB66 HH6678 HH HFB66 HBB66 HH6678 HH HFB67A HBB67A HH6678 HFB68 HBB68 HH68 HBB62 Non-Fusible -Pole -0A General Duty & -A Heavy Duty HD HNB62 HH62 GD HNB62 GH22 HD HNB62 HH62 HNB62 GH22 HH62 0 HNB64 GH24 HH64 0 HNB6 HH6678 HH HNB66 HH6678 HH HNB67A HH6678 HNB678 HH68 HNB62 Mechanism Assembly Line & Load Lugs Fusible 2- and -Pole -0A General Duty & -A Heavy Duty HD 2V HM62 HL62 GD HM62 HL62 HD 2V HM62 HL62 0V HM62 HL62 0V HM62 HL62 HM62 HL6 0 HM64 HL64 0 HM6 HL HM66 HL HM67A HL67A HM678 HM62 HFB66 Non-Fusible -Pole -0A General Duty & -A Heavy Duty HD HM62 HL62 GD HM62 HL62 HD HM62 HL62 HM62 HL6 0 HM64 HL64 0 HM6 HL HM66 HL HM67A HL67A HM678 HFB62 HH62 Three lugs included in kit. Includes lugs. Lugs not included. One lug per kit. One per switch required unless otherwise noted. One required per pole. For type 4/4X stainless steel switches add S to end of catalogue number. For replacement door for heavy duty switches add DOOR to end of switch catalogue number. Lugs included with line and load bases. -22 Siemens Canada Limited Power Product

23 General and Heavy Duty Safety es Safety Dimensions & Shipping Weights Dimensions GFC22N GFC222N GFC22N GFC224N GFC2N GFC22N GFC2N GFC24N HFC22J HFC22N HFC22NR HFC22S HFC222J HFC222N HFC222NR HFC222S HFC22J HFC22N HFC22NR Height - Inches (mm) Width - Inches (mm) Depth - Inches (mm) Box A 7.79 (2) 4.26 (62) 2.9 (8) (7) 7.97 (2) 4.26 (62) 2.9 (8) (7) 4.27 (6) 4.26 (62) 4.9 (66) 4.27 (26) 6.22 (42) 6.26 (4) 6.26 (4) 6.22 (4) 2.96 (8) 2.9 (8) 2.9 (8) With Door B 8. (7).4 (92) 2. (88).07 (789) 8.9 (8).4 (92) 2. (88).07 (789) 7. (4).4 (92) 7. (4) 9. (49) 7.46 (444) 9. (49) 2.6 (88) 2. (88) With Rain Shed C.77 () 7.77 (4) 2.46 (96) Box D. () 6.64 (69) 9.84 (24) 4.62 (9) 7.9 (8) 6.64 (69) 9.64 (24) 4.62 (7) 6.64 (69) 6.64 (69) 6.64 (69) 6.64 (69) 9.7(2) 9. (22) 9.6 (2) 9.7 (2) 9.6 (24) 9.64 (24) 9.64 (24) With Handle E.94 () 8.70 (22).70 (297) 6.68 (424) 7.69 (9) 8.70 (22).70 (297) 6.68 (424) 9.02 (229) 9.0 (229) 9.0 (229) 9.0(229).47 (29). (29). (29).47 (29) 2.02 () 2.0 ().97 (4) Box F.00 (76).0 (28).0 (28) 6.6 (62).00 (76).0 (28).0 (28) 6.6 (62).2 ().0 (28).0 (28).2 (). ().0 (28).0 (28). ().4 (6).0 (28).0 (28) With Handle G.88 (49) 8.6 (29) 8.6 (29).92 (277).88 (49) 8.6 (29) 8.6 (29).92 (277).46 (266).7 (8).7 (8).46 (266).46 (266).7 (8).7 (8).46 (266).46 (266).7 (8).7 (8) Knockout Diagram S S6 S S2 S2 S6 S S2 S6 S8 S6 S7 S S Shipping Weight (lbs.) SAFETY Knocks not provided on Type 4 / 4X and 2 or on 800 & A switches. Siemens Canada Limited Power Product -2

24 SAFETY General and Heavy Duty Safety es Safety Dimensions & Shipping Weights HFC22S HFC224J HFC224N HFC224NR HFC224S HFC2N HFC2NR HFC226N HFC226NR HFC227N HFC227NR HFC228N HFC228NR HFC26 HFC26J HFC26R HFC26S HFC266 HFC266J HFC266R HFC266S HFC2J HFC2N HFC2NR HFC2S HFC22J HFC22N HFC22NR HFC22S HFC2J HFC2N HFC2NR HFC2S HFC24J HFC24N HFC24NR HFC24S HFCJ HFCN HFCNR HFCS HFC26J HFC26N HFC26NR HFC26S HFC27J HFC27N HFC27NR HFC27S HFC28N HFC28NR HFC6 HFC6J, JW HFC6N HFC6NR HFC6R HFC6S, SW HFC62 Height - Inches (mm) Width - Inches (mm) Depth - Inches (mm) Box A 2.96 (8) (76) (7) (7) (76) 6.00 (422) 6.07 (424) 6.00 (422) 6.07 (429) (69) (69) (69) (69) 6.00 (422) 6.4 (426) 6.07 (424) 6.4 (426) 6.00 (422) 6.4 (426) 6.07 (424) 6.4 (426) 4.27 (6) 4.26 (62) 4.9 (66) 4.27 (6) 6.27 (4) 6.26 (4) 6.26 (4) 6.27 (4) 2.96 (8) 2.96 (8) 2.9 (8) 2.96 (8) (76) (7) (7) 2.96 (8) 6.4 (426) 6.00 (422) 6.07 (424) 6.4 (426) 6.4 (426) 6.00 (422) 6.07 (424) 6.4 (426) (69) (69) (69) (69) (69) (69) 4.26 (2) 4.27 (4) 4.26 (62) 4.9 (66) 4.9 (66) 4.27 (4) 6.26 (4) With Door B 2.6 (8).07 (789).07 (789).07 (789) 6.7 (8) 6.7 (8) 67.6 (706) 67.6 (706) 6.7 (8) 6.7 (8) 6.7 (8) 6.7 (8) 6.7 (8) 6.7 (8) 7. (4).4 (92) 7. (4) 9. (490) 7.46 (44) 9. (4) 2.6 (88) 2. (88) 2.6 (88).07 (789).07 (789).07 (789) 6.7 (8) 6.7 (8) 6.7 (8) 6.7 (8) 6.7 (8) 6.67 (8) 67.6 (706) 67.6 (706) 67.6 (706) 67.6 (706).4 (4) 7. (4).4 (4) 7. (4) 7.46 (44) With Rain Shed C.42 (798) 7.9 (4) 7.9 (4) (72) (72) 7.9 (4) 7.9 (4).77 () 7.77 (4) 2.46 (96).42 (798) 7.9 (4) 7.9 (4) (72) (72).77 ().77 () Box D 9.6 (24) 4.62 (7) 4.62 (7) 4.6 (7) 4.62 (7) 24.6 (626) 24.6 (626) 24.6 (626) 24.6 (626) 8. (97) 8. (97) 8. (97) 8. (97) 24.6 (626) (6) 24.6 (626) (6) 24.6 (626) (6) 24.6 (626) (6) 6.6 (69) 6.64 (69) 6.64 (69) 6.6 (69) 9.7 (2) 9. (22) 9.6 (2) 9.7 (2) 9.6 (24) 6.64 (69) 6.64 (69) 9.6 (24) 4.62 (7) 4.62 (7) 4.6 (7) 4.62 (7) (6) 24.6 (626) 24.6 (626) (6) (6) (626) (626) (6) 8. (97) 8. (97) 8. (97) 8. (97) 8. (97) 8. (97) 6.64 (69) 6.6 (24) 6.64 (69) 6.64 (69) 6.64 (69) 6.6 (24) 9. (22) With Handle E 2.02 () 6.9 (4) 6.98 (4) 6.99 (42) 6.9 (4) 26.2 (666) (678) 26.2 (666) (678) 9.96 () 9.96 () 9.96 () 9.96 () 26.2 (666) (672) (678) (672) 26.2 (666) (672) (678) (672) 9.02 (229) 9.0 (229) 9.0 (229) 9.02 (229).47 (29). (29). (29).47 (29) 2.02 () 2.0 ().97 (4) 2.02 () 6.9 (4) 6.98 (4) 6.99 (42) 6.9 (4) (672) 26.2 (666) (678) (672) (672) 26.2 (666) (678) (672) 9.96 () 9.96 (). (22) 9.96 () 9.96 (). (22) 9.0 (229) 9.02 (229) 9.0 (229) 9.0 (229) 9.0 (229) 9.02 (229). () Box F.4 (6) 6.6 (68) 6.6 (62) 6.6 (62) 6.6 (68) 9.2 (24) 9.2 (24) 9.2 (24) 9.2 (24) 9.24 (2) 9.24 (2) 9.24 (2) 9.24 (2) 9.2 (24) 9.9 (2) 9.2 (24) 9.9 (2) 9.2 (24) 9.9 (2) 9.2 (24) 9.9 (2).2 ().0 (28).0 (28).2 (). ().0 (28).0 (28). ().4 (6).0 (28).0 (28).4 (6) 6.6 (68) 6.6 (62) 6.6 (62) 6.6 (68) 9.9 (2) 9.2 (24) 9.2 (24) 9.9 (2) 9.9 (2) 9.2 (24) 9.2 (24) 9.9 (2) 9.24 (2) 9.24 (2) 9.24 (2) 9.24 (2) 9.24 (2) 9.24 (2).0 (28).2 ().0 (28).0 (28).0 (28).2 ().0 (28) With Handle G.46 (266) 2.8 (269) 2. () 2. () 2.8 (269) 4.64 (72) 4.64 (72).46 (266).7 (8).7 (8).46 (266).46 (266).7 (8).7 (8).46 (266).46 (266).7 (8).7 (8).46 (266) 2.8 (269) 2. () 2. () 2.8 (269) 4.64 (72) 4.64 (72) 4.64 (72) 4.64 (72).7 (8).46 (266).7 (8).7 (8).7 (8).46 (266).7 (8) Knockout Diagram S2 S S4 S S4 S S4 S S4 S S6 S8 S6 S7 S S S2 S S4 S4 S S4 S S6 S6 S8 S8 S6 Dimensions Shipping Weight (lbs.) Knocks not provided on Type 4/4X and 2 or on 800 & A switches. -24 Siemens Canada Limited Power Product

25 General and Heavy Duty Safety es Safety Dimensions & Shipping Weights Dimensions HFC62J, JW HFC62N HFC62NR HFC62R HFC62S, SW HFC6 HFC6J, JW HFC6N HFC6NR HFC6R HFC6S, SW HFC64 HFC64J, JW HFC64N HFC64NR HFC64R HFC64S, SW HFC6 HFC6J, JW HFC6N HFC6NR HFC6R HFC6S, SW Height - Inches (mm) Width - Inches (mm) Depth - Inches (mm) Box A 6.27 (4) 6.26 (4) 6.26 (4) 6.26 (4) 6.27 (4) 2.9 (8) 2.96 (8) 2.9 (8) 2.9 (8) 2.9 (8) 2.96 (8) (7) (76) (7) (7) (7) (76) 6.00 (422) 6.4 (426) 6.00 (422) 6.07 (424) 6.07 (424) 6.4 (426) With Door B 9. (490) 7.46 (444) 9. (490) 2. (88) 2.6 (88) 2. (88) 2.6 (88).07 (789).07 (789).07 (789).07 (789) 6.7 (47) 6.7 (47) 6.7 (47) 6.7 (47) With Rain Shed C 7.77 (47) 7.77 (47) 2.46 (96) 2.46 (96).42 (798).42 (798) 7.9 (4) 7.9 (4) Box D 9.7 (2) 9. (22) 9.6 (2) 9.6 (2) 9.7 (2) 9.64 (24) 9.6 (24) 9.64 (24) 9.64 (24) 9.64 (24) 9.6 (24) 4.62 (7) 4.62 (7) 4.62 (7) 4.6 (7) 4.6 (7) 4.62 (7) 24.6 (626) (6) 24.6 (626) 24.6 (626) 24.6 (626) (6) With Handle E.47 (29). (29). (29). (29).47 (29) 2.0 () 2.02 () 2.0 ().97 (4).97 (4) 2.02 () 6.98 (4) 6.9 (4) 6.98 (4) 6.99 (4) 6.99 (4) 6.9 (4) 26.2 (666) (672) 26.2 (666) (678) (678) (672) Box F. ().0 (28).0 (28).0 (28). ().0 (28).4 (6).0 (28).0 (28).0 (28).4 (6) 6.6 (62) 6.6 (68) 6.6 (62) 6.6 (62) 6.6 (62) 6.6 (68) 9.2 (24) 9.9 (2) 9.2 (24) 9.2 (24) 9.2 (24) 9.9 (2) With Handle G.46 (266).7 (8).7 (8).7 (8).46 (266).7 (8).46 (266).7 (8).7 (8).7 (8).46 (266) 2. () 2.8 () 2. () 2. () 2. () 2.8 () 4.64 (72) 4.64 (72) Knockout Diagram S6 S7 S7 S S S S S2 S2 S S S4 S4 S S Shipping Weight (lbs.) SAFETY HFC66 HFC66J, JW HFC66N HFC66NR HFC66R HFC66S 6.00 (422) 6.4 (426) 6.00 (422) 6.07 (424) 6.07 (424) 6.4 (426) 6.7 (47) 6.7 (47) 6.7 (47) 6.7 (47) 7.9 (4) 7.9 (4) (626) (6) 24.6 (626) 24.6 (626) 24.6 (626) (6) 26.2 (666) (672) 26.2 (666) (678) (678) (672) 9.2 (24) 9.9 (2) 9.2 (24) 9.2 (24) 9.2 (24) 9.9 (2) 4.64 (72) 4.64 (72) S4 S4 S S HFC67 HFC67J HFC67N HFC67NR HFC67R HFC67S HFC68, J, S HFC68N HFC68NR HFC68R HNFC26 HNFC26J HNFC26R HNFC26S HNFC266 HNFC266J HNFC266R HNFC266S HNFC6 HNFC6J, JW HNFC6R HNFC6S, SW HNFC62 HNFC62J, JW HNFC62R HNFC62S, SW HNFC6 HNFC6J, JW HNFC6R HNFC6S, SW HNFC64 HNFC64J, JW HNFC64R HNFC64S, SW (69) (69) (69) (69) (69) (69) (69) (69) (69) (69) (8) 44.4 (2) (9) 44.4 (2) (8) 44.4 (2) (9) 44.4 (2). (282).2 (282). (282).2 (282) 6.26 (4) 6.27 (4) 6.26 (4) 6.27 (4) 2.9 (8) 2.9 (8) 2.9 (8) 2.96 (8) (7) (76) (7) (76) 67.6 (706) 67.6 (706) 67.6 (706) 67.6 (706) 67.6 (706) 67.6 (706) 44.7 (2) 44.7 (2) 44.7 (2) 44.7 (2) 44.7 (2) 44.7 (2) 2. () 4.4 (9) 4.4 (9) 7.46 (444) 7.46 (444) 7.46 (444) 2. (88) 2.6 (88) 2.6 (88).07 (789).07 (789).07 (789) (72) (72) (72) (72) 4.9 (48) 4.9 (48) 2.6 (2) 7.77 (4) 2.46 (96).42(798) 8. (97) 8. (97) 8. (97) 8. (97) 8. (97) 8. (97) 8. (97) 8. (97) 8. (97) 8. (97) 24.6 (626) (6) (626) (6) 24.6 (626) (6) (626) (6) 6.64 (69) 6.6 (69) 6.64 (69) 6.6 (69) 9. (22) 9.7 (22) 9.6 (2) 9.7 (2) 9.64 (24) 9.6 (24) 9.64 (24) 9.6(24) 4.62(7) 4.62(7) 4.6(7) 4.62(7) 9.96 () 9.96 () 9.96 (). (22). (22) 9.96 () 9.96 () 9.96 (). (22). (22) 26.2 (666) (672) (678) (672) 26.2 (666) (672) (678) (672) 9.0 (229) 9.02 (229) 9.0 (229) 9.02 (229). (29).47 (29). (29).47 (29) 2.0 () 2.02 ().97 (4) 2.02 () 6.98 (4) 6.9 (4) 6.99 (4) 6.9 (4) 9.24 (24) 9.24 (24) 9.24 (24) 9.24 (24) 9.24 (24) 9.24 (24) 9.24 (24) 9.24 (24) 9.24 (24) 9.24 (24) 9.2 (24) 9.9 (2) 9.2 (24) 9.9 (2) 9.2 (24) 9.9 (2) 9.2 (24) 9.9 (2).0 (28).6 (4).0 (28).6 (4).0 (28). ().0 (28). ().0 (28).4 (6).0 (28).4 (6) 6.6 (62) 6.6 (68) 6.6 (62) 6.6 (68) 4.64 (72) 4.64 (72) 4.64 (72) 4.64 (72).7 (8).46 (266).7 (8).46 (266).7 (8).46 (266).7 (8).46 (266).7 (8).46 (266).7 (8).46 (266) 2. () 2.8 () 2. () 2.8 () S4 S S4 S S7 S9 S6 S7 S S S2 S Knocks not provided on Type 4 / 4X and 2 or on 800 & A switches. Siemens Canada Limited Power Product -