Course Schedule. Jul Oct Confined Spaces. Crane. Issue Work Permits. Confined Space
|
|
|
- Ginger Stafford
- 9 years ago
- Views:
Transcription
1 72-80 Belgravia St, Belmont, Perth, Schedule Jul Oct 2016 Confined Spaces Issue Work Permits Confined Space 1 Day $200 Working Safely at Heights & Confined Space Entry Package 2 Days $ Jul 22 Jul 10, 16, 30 Jul Jul , 13, Sep 04, 10, 24 Sep Sep Gas Test Atmosphere 5 hours $ Jul Sep Crane Gantry Crane (Overhead Crane) Mobile Slewing Crane over 100t (C0) Mobile Slewing Crane up to 100t (C1) Mobile Slewing Crane up to 60t (C6) 1 Day $350 5 Days $ Days $ Days $ Jul Sep Non Slewing Crane (CN) Vehicle Loading Crane (CV) 5 Days $1065 Rio Tinto CV 5 Days $775 4 Days $775
2 18-22 Jul Sep Sep Jul Sep Sep Dogging & Rigging Basic Rigging Intermediate Rigging Dogging and Rigging Training Packages 4 Days $875 Basic Rigging Jul Sep Dogging and Rigging Training Packages Dogging & Adv. 20 Days $3140 Dogging & Basic (Dogging Dates) 10 Days $1566 Dogging Training 5 Day's $865 Intermediate & Adv. Rigging Package 6 Days $ Sep 27 Sep - 02 Oct Dogging and Rigging Training Packages Identify Requirements for Safe Tilt-Up Work Dogging Training Intermediate Rigging 4 Days $865 5 hours $250 Dogging & Adv. 20 Days $3140
3 Jul Sep Dogging Training Dogging & Basic (Dogging Dates) 10 Days $ Days $865 4 Days $ Gas Transmission and Distribution Poly Welding Poly Welding (Butt Welding) Polywelding (Elect rofusion Welding) Butt Welding Electrofusion Welding 19 Jul 18 Jul 19 Jul 18 Jul Sep 13 Sep Hazardous Areas Hazardous Areas (EEHA) Training 2 Days $949 Hazardous Areas (EEHA) Installation, Maintenance and Detailed Inspection Training 5 Days $2495 Hazardous Areas (EEHA) Awareness Training 1 Day $ , Sep Jul Jul 03, Sep Health & Safety
4 CPR Training First Aid Training BSB41415 Certificate IV Work Health and Safety (WHS) Low Voltage Rescue Training (LVR Training) 1 Day $59 1 Day $129 Intensive 5 Days Classroom, 12 Months to Complete $1665 LVR and CPR 1 Day $ Jul 08 Jul Jul 13 Jul Sep 02, 30 Sep 07 Sep Low Voltage Rescue Training (LVR Training) Restricted Asbestos Licence Manual Handling LVR and CPR 1/2 Day $199 1/2 Day $350 4 Hours $120 06, 12, 13, 19, 20, 27 Jul Jul Sep 20 Jul Sep Heights & Safe Access IRATA Rope Access Level 1 IRATA Rope Access Level 2 Level 1 Level 2 Level 3 Level , Jul 01-06, Sep Sep 27 Sep - 01 Oct Jul Jul 04-09, Jul 01-06, Sep Sep 27 Sep - 01 Oct IRATA Rope Access Level 2 IRATA Rope Access Level 3 Level 2 Level 3 Level 1 Level 2
5 04-09 Jul Jul 04-09, Jul 01-06, Sep Sep 27 Sep - 01 Oct Jul IRATA Rope Access Level 3 Work at Heights Level 3 Working Safely at Heights & Confined Space Entry Package 2 Days $ Jul 05, 07, 12, 14, 19, 21, 26, 28 Jul 02, 04, 09, 11, 16, 18, 23, 25, 30 01, 06, 08, 13, 15, 20, 22, 27, 29 Sep 09, 23 Jul 06, 20 03, 17 Sep Jul Sep Load Shifting Forklift Training 1 Day $295 2 Days $415-1 Day $320-2 Days $455 04, 18 Jul 01, 15, , 14-15, 21-22, Jul 04-05, 11-12, 18-19, , 23 Jul 06, 20 03, 17 Sep Jul Sep 01-02, 08-09, 15-16, 22-23, Sep Telescopic Materials Handler (Telehandler) Operations 1 Day $ Jul Sep 1 Day $ Jul Sep
6 Maintenance Basic Hydraulics (Hydraulics 1) 5 Days $1150 Mobile Plant Elevating Work Platform (EWP) 1 Day $320 2 Days $450-1 Day $340-2 Days $480 11, 25 Jul 08, 22 05, 19 Sep 05-06, 12-13, 19-20, Jul 02-03, 09-10, 16-17, 23-24, , 30 Jul 13, 27 10, 24 Sep Jul Sep 06-07, 13-14, 20-21, Sep Process Plant Operations Flange Integrity Level 1 1 Day $750 Road & Transport 20 Jul Sep Load Restraint 1 Day $250 Scaffolding 06 Jul 03, Sep Basic Scaffolding Intermediate Scaffolding Advanced Scaffolding
7 5 Days $765 5 Days $785 5 Days $ Jul Sep Jul Jul Sep Sep Workplace Training TAE Certificate IV in Training and Assessment (TAE) 5 Days Classroom, 12 Months to Complete $1665 Provider Number 32531
For information only Not all programs are provided by HSAS TRAINING PROGRAM DURATION STATUS SOURCE TARGET OUTCOME ASBESTOS
ASBESTOS Remove Non-Friable Asbestos (CPCCDE3014A) Mandatory nationally accredited training for NSW asbestos licensing purposes, with WorkCover approval Non-friable asbestos workers & wallet size card
VET Quality Framework audit report
VET Quality Framework audit report Continuing registration as a national VET regulator (NVR) registered training organisation (RTO) Legal name of organisation Sharp Mining Industry Training Pty Ltd Date/s
TRAINING CENTER. ISO 9001 : 2008 Certified. Technical Courses. Soft Skills Courses. IADC - Approved HSE Courses. Business Management Courses
TRAINING CENTER ISO 9001 : 2008 Certified IADC - Approved HSE Courses Technical Courses Business Management Courses Soft Skills Courses ACCREDITATION S About Us.. SG Training is the first privately owned
Release 1. UEG20114 Certificate II in Gas Supply Industry Operations
Release 1 UEG20114 Certificate II in Gas Supply Industry Operations UEG20114 Certificate II in Gas Supply Industry Operations Modification History Description Scope This qualification provides competencies
PNG RTO NTC.191. SCOPE OF REGISTRATION
PNG RTO NTC.191. SCOPE OF REGISTRATION Construction General and Civil CPCCOHS1001A Work Safely in the Construction Industry (White Card) CPC10111 Certificate I in Construction RII30909 Certificate III
PORT HEDLAND PORT AUTHORITY
PORT HEDLAND PORT AUTHORITY Working at Heights Procedure PR-OHS021 Document Users : All Contractors All Port Users Port Hedland Port Authority Position Responsible For Keeping Document Current : Safety
Pre-Qualification Questionnaire Checklist
Pre-Qualification Questionnaire Checklist Thank you for your interest in becoming an Approved Contractor with Christchurch Airport. To ensure efficient processing of your application please utilise the
CAPABILITY STATEMENT MCLEOD TRAINING ORGANISATION PTY LTD
CAPABILITY STATEMENT MCLEOD TRAINING ORGANISATION PTY LTD Executive Summary UNIQUE COMPETITIVE ADVANTAGE OF An industry preferred provider of consultancies, training and assessment in technical and leadership
J.J. Keller Safety Materials
J.J. Keller Safety Materials Using safety talks will allow your employees to analyze Real Life Stories and share what they feel the individuals did right and wrong, and what should happen next. Safety
APPLICATION FOR A HIGH RISK WORK LICENCE Work Health and Safety Act 2011
APPLICATION FOR A HIGH RISK WORK LICENCE Work Health and Safety Act 2011 PURPOSE This form is to be used to apply for a high risk work licence under the Work Health and Safety Act 2011 (the Act). You can
Business & Legal Reports (BLR) Training. Workplace Safety Online Courses. Accident Investigations. Aerial Lift Safety
Business & Legal Reports (BLR) Training Workplace Safety Online Courses COURSE TITLE Accident Investigations Aerial Lift Safety Americans with Disabilities Act - What Supervisors Need to Know Arc Flash
SECTION 2 HAZARDOUS WORK. CLASSIC STANDARD 2.04 Working at Heights
SECTION 2 HAZARDOUS WORK CLASSIC STANDARD 2.04 Working at Heights 1 Purpose The purpose of this standard is to document Rio Tinto Aluminium Mining & Refining Weipa s requirements to minimise, and where
Contractor Environment, Health and Safety Management Plan
EHSMS10 Contractor and Supplier EHS Management Contractor Environment, Health and Safety Management Plan Purpose Guidelines Record Keeping This template provides an example to Santos Contractors of the
Procedure. Working at Heights. 1. Purpose. 2. Scope. 3. Definitions. 4. Planning. 4.1. QUT risk check. 4.2. Work at Height permit
Procedure Working at Heights 1. Purpose The purpose of this procedure is to establish compliance requirements and specify precautions to be taken during the conduct of work at height within QUT to prevent
SAFE WORK PROCEDURE SWP 015 WORKING AT HEIGHT SEPTEMBER 2013 DOC. NO. D13/248399
Operation Brief Description of Activity Limitations MORELAND CITY COUNCIL Operations Centre 7-9 Walter Street Hadfield Vic 3046 Tel: 8311 4300 Working at height Approved by the Walter Street OHS committee
Application to renew an interstate Licence to Perform High Risk Work
Workplace Health and Safety Queensland FORM 97 Application to renew an interstate Licence to Perform High Risk Work V1.7.14 This form is only to be completed for high risk work licences that were issued
Table of Contents Introduction How to Use This Manual How to Do a Facility Audit
Table of Contents Introduction How to Use This Manual How to Do a Facility Audit OSHA Plant Safety Audit Checklist: Self-Inspection Types of Hazards Addressing the Hazards in Your Work Area Safety and
Good Practice Guide. The Selection of Access Methods to Install and Dismantle Safety Netting
Good Practice Guide The Selection of Access Methods to Install and Dismantle Safety Netting FASET is the trade association for the safety net rigging and temporary safety systems industry. This document
What the OHS Act says about the training responsibilities of constructors, employers, and supervisors
REQUIRED Pull-out chart TRAINING Construction Health and Safety in Ontario The Occupational Health and Safety Act (OHS Act) requires constructors and employers to provide worker training. Specific requirements
WORK HEALTH AND SAFETY PUBLIC COURSES 2015 COURSE DATES AND FEES
PO Box 1774, Oxenford, Queensland 4210 Telephone: (07) 5573 6199 Fax: (07) 5580 6366 Email: [email protected] WORK HEALTH AND SAFETY PUBLIC COURSES 2015 COURSE DATES AND FEES WHSA (5 days):
WHS Contractor Management Procedure
Procedure Approved: 09/07/2013 Next Review: 09/07/2015 1. Overview The District council of Mount Remarkable Council is committed to engaging quality Contractors who have a sound understanding and commitment
Training Needs Assessments Chart. Index of Training Requirements Job Description: or Employee:
1910.1200 Hazard Communication HAZCOM 1910.147 The Control of Hazardous Energy, Lock-out/Tag-Out 1910.212 Machines, General Requirements 1910.305 Electrical, Wiring Methods, Components & Equip. 1910.132
Aviva Insurance Limited
One Park Place, Hatch Street, Dublin 2 Registration number: 9002 is accredited by the Irish National Board (INAB) to undertake inspection as detailed in the Schedule bearing the above registration number,
COMPETENCY TRAINING STUDENT HANDBOOK
Competency Training Pty Ltd ABN 32 113 051 139 433 Boundary Street Spring Hill QLD 4000 Ph 1300 872 585 Fax +61 (0)7 3217 8077 www.competencytraining.com.au COMPETENCY TRAINING STUDENT HANDBOOK File :
Owner s Manual Gantry Cranes
Owner s Manual Gantry Cranes Fixed Height Gantry Crane MODEL NUMBER: SERIAL NUMBER: CAPACITY IN TONS: Telescoping Gantry Crane Bushman AvonTec 262-790-4200, 800338-7810, Fax 262-790-4200 www.bushmanavontec.com
Working at a height of two metres or more while carrying out general work activities or construction works
1. Working at Heights 2. Scope / Description of Job Working at a height of two metres or more while carrying out general work activities or construction works 3. Critical Safety Issues A fall from any
BCIT. CNST 1100 Construction Safety Officer Training. Lesson Plan
BCIT CNST 1100 Construction Safety Officer Training Lesson Plan BCIT Two Week Outline- CNST 1100 (Please note there may be adjustments made to this outline) Monday- Day #1 Week #1 0730 Paperwork Introductions
MANAGING THE RISK OF PLANT GUIDELINES
WHS UNIT MANAGING THE RISK OF PLANT GUIDELINES Contents 1 Introduction... 3 2 Scope... 3 3 Definitions... 3 4 Responsibilities... 4 4.1 Workers... 4 4.2 Supervisors... 4 4.3 Executive Deans, Directors,
DVD PROD# PROGRAM TITLE LANGUAGES 0006006 ACCIDENT INVESTIGATION DETER ROOT CAUSE
0006006 ACCIDENT INVESTIGATION DETER ROOT CAUSE 0006464 Accident Investigation: Examining the Details English/Spanish 0006271 AERIAL LIFT SAFETY ENGLISH/SPANISH 0006178 AIR EMISSIONS 0006390 AMMONIA SAFETY
TABLE OF CONTENTS 4. CONTRACTOR SHE MANAGEMENT PROGRAM R1400.00 --MANAGEMENT STATEMENT
4. CONTRACTOR SHE MANAGEMENT PROGRAM R1400.00 TABLE OF CONTENTS --MANAGEMENT STATEMENT ADMINISTRATIVE 1. SHE AND ACCIDENT PREVENTION 1-A Discipline 2. NEW HIRE ORIENTATION (Outline) 2-A New Hire Orientation
WHS CONTRACTOR MANAGEMENT PROCEDURE
MANAGEMENT PROCEDURE 1. OVERVIEW The Flinders Ranges Council as part of its commitment under its WHS Contractor Management Policy, recognises its obligation to: Ensure, so far as is reasonably practicable,
WORK AT HEIGHT UNIT 4
WORK AT HEIGHT UNIT 4 WHAT IS WORKING AT HEIGHT? The Working At Height Regulations 2005 define working at height as:- Any work above or below ground level where a fall would result in personal injury.
ELECTRICAL SAFETY & ARC FLASH Handbook
Electricity Forum Handbooks Electrical Safety and Arc Flash Handbook Series ELECTRICAL SAFETY & ARC FLASH Handbook Volume 10 Reprinted by permission of the publisher, Hurst Communications, from the Electrical
Construction Trades Safety Training and Practices. Presented By: James B. Asbury, MS, MBA, CSP, CIH
Construction Trades Safety Training and Practices Presented By: James B. Asbury, MS, MBA, CSP, CIH Agenda Parkersburg-Marietta Contractors and Trades Education and Development Fund Educational and Development
HEALTH SAFETY & ENVIRONMENTAL WORKSITE AUDIT
Environmental & Occupational Health and Safety Unit HEALTH SAFETY & ENVIRONMENTAL WORKSITE AUDIT This health and safety audit report is advisory only. This information is not intended to be relied upon
Model Safety Program
Model Safety Program DATE: SUBJECT: Contractor Safety Verification Program REGULATORY STANDARD: OSHA 29 CFR RESPONSIBILITY: The, is solely responsible for all facets of this program and has full authority
Construction Laborers Education, Apprenticeship & Training Fund of Minnesota & North Dakota 2015 Schedule
Construction Laborers Education, Apprenticeship & Training Fund of Minnesota & North Dakota 2015 Schedule TRAINING LIUNA C R S TE R EN Fu nd Tr a i n L A B OR E 2350 Main Street Lino Lakes, MN 55038 n
Work Health and Safety. Seven Steps for Small Business
Work Health and Safety Seven Steps for Small Business Work health and safety (WHS) is a key management responsibility for every small business. South Australia s WHS laws took effect on 1 January 2013.
PICAC TRAINING SCHEDULE
Plumbing Industry Climate Action Centre 6/306 Albert Street Brunswick VIC 3056 T (03) 9356 8902 F (03) 9356 8929 [email protected] PICAC TRAINING SCHEDULE JANUARY JUNE 2014 2014 22138VIC Certificate
CONTRACTOR INDUCTION HANDBOOK
CONTRACTOR INDUCTION HANDBOOK POLICY The health and safety of all school employees and contractor employees is a vital concern at the school. Contract personnel will be treated in a manner consistent with
Course Description List
Course Description List Arc Flash This course is used to raise awareness about the specific electrical hazards of an arc flash. This course will also introduce a new CSA Standard on workplace electrical
WORK PLACE SAFETY TRAINING
Click web link and follow directions: WORK PLACE SAFETY TRAINING https://safety.army.mil/training/distanclearningonlinetrainning/tabid/1210/de fault.aspx List of training classes: ATRRS: The Supervisor
GUIDE TO TOWER CRANES 1
1 This Guide provides information on siting, erecting and using tower cranes and selferecting tower cranes in the workplace and supports the General guide for cranes. This Guide forms part of a series
WHS CONTRACTOR MANAGEMENT PROCEDURE
WHS CONTRACTOR MANAGEMENT PROCEDURE Version No: Issued 3.0 18/11/2013 15/11/2018 1. Overview The District Council of Peterborough as part of its commitment under its WHS Contractor Management policy, recognises
Hazard Identification, Risk Assessment and Control (HIRAC) for Work at Height Risk, Health and Safety
Hazard Identification, Assessment and Control (HIRAC) for Work at Height, Health and Safety A. Introduction Hazard identification and safety risk assessments should be conducted prior to carrying out any
Health and Safety Training (Statutory)
HEALTH AND SAFETY MATRIX 1.1 Abrasive Wheels Training Asbestos Training Banksman Training Chainsaw Training Chemical Agents Training Confined Spaces Training C1 Management Grade Confined Spaces Training
Drilling Rig Hazard Recognition Training for Supervisors and Employees
Drilling Rig Hazard Recognition Training for Supervisors and Employees This 3-day packed course takes on every aspect of drilling and related hazards. However, it does not follow any other course layout.
REGISTRATION OF INTEREST FOR EMPLOYMENT
REGISTRATION OF INTEREST FOR EMPLOYMENT Thank you for your registration of interest for employment with Global Resource Support! For your registration to be considered, please complete the entire document
SERVICES CATALOGUE 1
1 SERVICES CATALOGUE Table of Contents About the NSCSA... 1 Certificate of Recognition (COR) certification... 2 Training Overview... 4 Course Descriptions Management Training COR Certification Courses...
STUDENT INFORMATION GUIDE
STUDENT INFORMATION GUIDE About the Diploma of Occupational Health and Safety Qualification What motivates you to go to work every day? Is it making sure everyone arrives at work and returns safely to
ISSC 34 Guide for Height Safety within the NSW Electricity Supply Industry
Guide for Height Safety within the NSW Electricity Supply Industry June 2009 Revised June 2013 PREFACE The Industry Safety Steering Committee was re-constituted by the NSW Minister for Energy in mid 2002
Managing the risk of falls at workplaces code of practice
Managing the risk of falls at workplaces code of practice July 2015 NSW note: This code is based on a national model code of practice developed by Safe Work Australia under the harmonisation of national
PITTSBURG TANK AND TOWER CO., INC.
PITTSBURG TANK AND TOWER CO., INC. HEALTH, SAFETY & ENVIROMENTAL PROGRAM INDEX 1.SAFETY POLICY & MANAGEMENT RESPONSIBILITIES - Safety Policy - Administrative Duties * Top Management * Safety Director *
Chicago Crane Operators Examination Study Guide
Chicago Crane Operators Examination Study Guide Cranes and hoisting equipment with a rated capacity of 2,000 pounds or more require a licensed operator for use in the City of Chicago. This study guide
WHS LEGISLATIVE COMPLIANCE GUIDELINES
WHS LEGISLATIVE COMPLIANCE GUIDELINES CONTENTS 1 Introduction... 2 2 Scope... 2 3 Responsibilities... 2 3.1 Manager WHS Unit... 2 3.2 Management of Faculties, Divisions and Research Institutes... 2 4 Maintaining
MANAGING THE RISK OF FALLS AT WORKPLACES
MANAGING THE RISK OF FALLS AT WORKPLACES Code of Practice DECEMBER 2011 Safe Work Australia is an Australian Government statutory agency established in 2009. Safe Work Australia consists of representatives
Occupational Health and Safety Act 2000
New South Wales Occupational Health and Safety Amendment (National Code of Practice and National Standard for Licensing) Regulation 2009 under the Occupational Health and Safety Act 2000 Her Excellency
AUSTRALIAN AIRCONDITIONING SERVICES SAFETY MANAGEMENT PLAN
AUSTRALIAN AIRCONDITIONING SERVICES SAFETY MANAGEMENT PLAN ISSUE NOVEMBER 2010 AU07899 TABLE OF CONTENTS 1. DOCUMENT CONTROL 3 2. PLAN AND SAFETY OBJECTIVES AND TARGETS 4 3. OCCUPATIONAL SAFETY AND HEALTH
TLILIC3003A Licence to operate a bridge and gantry crane
TLILIC3003A Licence to operate a bridge and gantry crane Release: 1 TLILIC3003A Licence to operate a bridge and gantry crane Modification History Not Applicable Unit Descriptor Unit Descriptor This unit
MATERIAL HANDLING PROGRAM (Section 10)
MATERIAL HANDLING PROGRAM (Section 10) OVERVIEW (WMI Facility) (1) Only certified personnel will operate powered industrial lifts. (2) Training will be provided to those who require to be certified or
TECHNICAL INFORMATION
Page: 1/6 This checklist recognizes the major accident hazards found by experience of previous HAZID studies. It is not intended to be totally exhaustive and feedback from users should be incorporated
FALL PROTECTION WORK PLAN
FALL PROTECTION WORK PLAN INSTRUCTIONS A written fall protection work plan must be implemented by each employer on a job site where a fall hazard of 10 feet or greater exists, in accordance with OSHA Standards.
Managing the Risks of Falls at Workplaces
Managing the Risks of Falls at Workplaces Code of Practice December 2012 CP122 Workplace Standards Department of Justice This code of practice has been approved by the Tasmanian Minister for Workplace
COURSE INFORMATION SHEET
Course ID: HGT - WRKHT COURSE OVERVIEW WORKING AT HEIGHTS Working at Heights is an approved Ontario Ministry of Labour (MOL) program (Approved Training Program ID # WAH56789). This program was designed
Safety Training Needs Assessment
Safety Needs Assessment Form Instructions: Please review each question and either check YES or NO. If a question is checked YES you will be required to complete the training topic before initial assignment
Benchmark OHS Consulting Pty Ltd Self Assessment WHS Audit Tool
Benchmark OHS Consulting Pty Ltd Self Assessment WHS Audit Tool This WHS Auditing System Tool is to be used as a self-assessment of YOUR COMPANY compliance with AS 4801 and the Work Health and Safety Act
Document ref: MG(M)201 Version no: 01 Page no: 1 / 12. Contractor rules
Page no: 1 / 12 Contractor rules Table of Contents Purpose... 2 Scope... 2 1. Responsibilities... 2 2. Planning Stage... 3 3. Site induction, emergency procedures and documentation... 3 4. Risk Assessment
Cristal Mining East. Mine Safety Management Plan
Doc No: AP_ME_4.4.04007 Revision: 3 Series: Management Plan Location: Mining East Cristal Mining East Mine Safety Management Plan Next Review: Nov-2015 Owner: J. Sulicich Revision Date: Nov-2014 Approver:
Audit report VET Quality Framework
Audit report VET Quality Framework Continuing registration as a national VET regulator (NVR) registered training organisation ORGANISATION DETAILS Organisation s legal name Australian Skills Group Pty
THANKYOU FOR YOUR INTEREST IN TRAINWEST. www.trainwest.com.au
THANKYOU FOR YOUR INTEREST IN TRAINWEST Trainwest is proudly a Western Australian owned and run company with the prime objective of providing nationally recognised training programs with exceptional professionalism
Australian Institute of Management Education and Training
RTO Trading Name RTO ID Qualification / Nationally Recognised Skill Set Title/Skill Sets Asset Training 60083 HLT32812Certificate III in Health Support Services BSBFLM303C Contribute to effective workplace
Safe Work Method Statement
Safe Work Method Statement Prepared By: Paul Sefton-Rowston Document Owner(s) Paul Sefton-Rowston Organisation Role Director Version Control Version Date Author Reviewer Change Description 0.1 05/09/12
Safety. Vopak Fundamentals on Safety
Safety Vopak Fundamentals on Safety Introduction Every person working at a Vopak location should be able to go home at the end of the working day without having suffered or caused harm in any way. Eliminating
Please provide details of your claims within the last 5 years Date Incident details Amount paid Amount reserved
Combined Liability Insurance Client name: Operating address: Company reg. number: Business description: Year business established: Current Insurer: Current Broker: Renewal date: Premium: Please provide