Course Description List

Transcription

1 Course Description List Arc Flash This course is used to raise awareness about the specific electrical hazards of an arc flash. This course will also introduce a new CSA Standard on workplace electrical safety, and introduce some of the safe work practices related to arc flash hazards. Aerial Lifts This course discusses safe work practices and procedures when working with or around aerial lifts. Air Jacks and Shoring This Air Jacks and Shoring course is designed to give you the procedures and hazards of Air Jacks and Shoring and how to keep yourself safe when working in or near this type of operation. Chainsaw Training The objective of this training is to develop competent chainsaw operators, who will understand the hazards associated with chainsaw operations, maintenance, refueling and safety precautions. Chemical Biological Hazards and Harmful Substances A modular set of courses to help you with chemical biological hazards and harmful substances training. City Of Calgary Environmental Policy The purpose of this course is to inform your company of your environmental responsibilities as a contractor for The City of Calgary. This course includes environmental responsibilities information for contractors working with The City of Calgary, The City of Calgary's Environmental Policy and Contractor environmental acknowledgement form. Commercial Carrier Program This program discusses the conduct of drivers and passengers who are to uphold the regulations by operating vehicles in a safe professional manner. This

2 course also includes the requirements that apply to all types of cargo and establishes basic principles for compliance with standard. Confined Space Program This course is designed to teach your staff on your company s confined space program. This course can be customized to fit you company s specific Defensive Driver Course This course is designed to teach your staff on your company s Defensive Driving Program. This course can be customized to fit you company s specific Drug and Alcohol A modular set of courses to help you with drug and alcohol training. Electrical Safety This course is designed to teach employees on the company Electrical Safety program. It can be customized to fit your needs based on your requirements. Emergency Preparedness This course is designed to teach your employee on the company Emergency Preparedness program. The course can be customized to fit the company s specific needs; you can also make the course site specific. Ergonomics (course provided by AMTA (Alberta Motor Transportation Association)) The objective of this course is to teach students the scope of ergonomics, defining musculoskeletal injuries (MSI), and basic principles and guidelines relevant to multiple industries. This course focuses on key factors of risk for MSI s and how to reduce them. Cost: $ 40 + GST Members / $ 50 + GST Non members per student, per course. Does not include the source files. Excavating Program This course is designed to teach your staff about the company excavation program. This course can be customized to fit your company s specific

3 Excavating Utilities This course examines the hazards associated with excavating utilities and procedures to eliminate or minimize these hazards. Step by step instructions for the set up procedure, operational procedure, probing, utility protection and site securement are also reviewed. Fall Protection Awareness This course is designed to teach your staff on your company s fall protection equipment. This course can be customized to fit you company s specific Fall Protection Program This course is designed to teach your management and staff on your company s Fall Protection Program requirements. This course can be customized to fit you company s specific Fatigue Management Program This course is designed to teach your staff on your company s Fatigue Management Program requirements. This course can be customized to fit you company s specific Fire and Explosion Preparedness This course is designed to teach your staff on your company s Fire and Explosion Fire and Explosion Program This course discusses safe prevention and planning for fires, explosions, and combustible materials. Appropriate planning and procedures are also reviewed to ensure compliance with local regulatory requirements. Fire Extinguisher Course This course is designed to teach your staff on Fire extinguisher Awareness. This course can be customized to fit you company s specific First Aid Program

4 This course is designed to teach your management and supervisors on your company s first aid requirements. This course can be customized to fit you company s specific Forklift training This course is designed to teach your staff on your company s Forklift Training General Safety Requirements This course is designed to teach your staff on your company s general safety Ground Disturbance (Course Provided by E-compliance) Our Online Ground Disturbance Course is designed for those individuals who are planning, supervising or otherwise participating in trenching and/or excavating operations. Participants will gain the tools and knowledge to safely complete the work and avoid a potential pipeline hit. Cost is $89.95 per student. Does not include source files. Hazard Assessment Program This course is designed to teach staff about the company hazard assessment program and guidelines. Hearing Conservation Program This course is designed to teach your staff about your company s hearing conservation program. This course can be customized to include an current PPE used by your company. The course is customizable to fit your exact Hoisting, Rigging and Signaling This hoisting, rigging and signaling course is designed to teach staff on your company rigging and signaling program. This course can be customized to fit your company specific Hydrogen Sulfide H2S Program This course is designed to teach your staff on your company s H2S program

5 IRP16 Compliant Orientation This Orientation meets the requirements of the Industry Recommended Practice 16-Basic Safety (IRP-16) which has become the standard in the oil and gas industry. Job Safety Analysis Training (JSA) A job safety analysis (JSA) is defined as procedures which help integrate accepted safety and health principles and practices into a particular task or job operation. In our JSA course, each basic step of a job is identified as well as potential hazards and recommendations for the safest way to do the job. Job Safety Analysis Training (Manufacturing) This course is designed to teach your staff on your company s JSA or Safe Work Procedure requirements. This course can be customized to fit you company s specific Ladder Safety Program This course is designed to teach your staff on your company s ladder safety program requirements. This course can be customized to fit you company s specific Leadership for Safety Excellence This course is designed to teach your staff on your company s Leadership for Safety Excellence program. This course can be customized to fit you company s specific Base Costs $ Cost includes source files (template) of course. Lifting and Handling Loads This course is designed to teach your staff about manually lifting and handling loads. The course can be customized to fit you exact Managing Hazardous Energy This course is designed to teach your staff on your company s managing hazardous energy requirements. This course can be customized to fit you company s specific

6 Moving Loads Over Head This course is designed to teach your staff about the principals and guidelines of moving loads overhead. This course can be customized to fit the company s exact New Hire Orientation This course is used to orientate new employees to your company. The course is able to be designed to fit your exact Office Orientation This course is designed to orientate office staff to your company. The course is able to be designed to fit your exact Oil & Gas Drilling Operation Safety This course is designed to teach your staff on your company s Oil & Gas safety Program requirements. This course can be customized to fit you company s specific Pipe Stressing and Tapping In this course the procedures for Pipe Stressing and Tapping are reviewed. Hazards associated with pipe stressing and tapping are discussed as well as how to control those hazards. PPE Program This course is designed to teach your staff on the company s PPE program. The course can be customized to fit your exact needs and PPE used at your company. Principles of Health and Safety This course provides owners, managers and supervisors with information on the requirements when developing a Health and Safety. This course includes recommendations on Policies, Practices, Procedures, Hazard Assessments, Training, Maintenance, Inspection, Investigations and Record Keeping as required by Alberta Occupational Health and Safety. Resource Road Safety (For Peace River Area)

7 This course is designed to teach your staff on Resource Road Safety Safe Work Practices/Procedures Course This course is designed to teach your staff on your company s safe work practices and procedure requirements. This course can be customized to fit you company s specific We have approximately 50 safe work practices built into the course. Set Manhole and Pipe Installation Communications between workers when setting manholes and pipes is a crucial practice during this procedure. This training program will examine the safe procedures for setting and pipe installation. Spill Response This is a basic Spill Response Course. The course can be customized to include any current spill response equipment currently in the company inventory. Sub-Contractor Orientation A jobsite manager must ensure any new worker is well orientated. Work sites are filled with potential hazards and keeping the project safety depends on keeping everyone informed and aware. New workers or subcontractors don t automatically know what to do on a new jobsite and this is where the Sub-Contractor Orientation Course can assist. Even if they are skilled and well trained, they cannot know the particular hazards and problems of a new worksite. Transportation of Dangerous Goods (TDG) This course covers Transportation of Dangerous Goods (TDG) products, i.e. goods sent/received via mail and courier services, and the preparation of hazardous waste chemicals for disposal. This course focuses primarily on the ground transportation and TDG Clear Language Regulations. Trenching, Open Cut This Trenching course is design to give you the basics of what Trenching Open Cut is and how to keep yourself safe when working in or near this type of operation.

8 Welding Program This course is designed to teach your staff on your company s welding program Working Alone Program This course is designed to teach your staff on your company s Working Alone Workplace Violence Program This course is designed to teach your staff on the Workplace Violence Program. It can be customized to fit your exact Workplace Health and Safety Committee In this course, you will be shown the responsibilities and procedures for Workplace Safety and Health Committees and how to create standardized reporting and communication within the workplace WHMIS This is a generic WHMIS course. The course can be customized to include all your current MSDS s, where you can train your staff on the exact chemicals they work with.