TABLE OF CONTENTS 4. CONTRACTOR SHE MANAGEMENT PROGRAM R MANAGEMENT STATEMENT
|
|
|
- Clarissa Taylor
- 10 years ago
- Views:
Transcription
1 4. CONTRACTOR SHE MANAGEMENT PROGRAM R TABLE OF CONTENTS --MANAGEMENT STATEMENT ADMINISTRATIVE 1. SHE AND ACCIDENT PREVENTION 1-A Discipline 2. NEW HIRE ORIENTATION (Outline) 2-A New Hire Orientation 2-B New Hire Orientation Test 3. ACCIDENT INVESTIGATIONS 3-A Near Miss Procedure 3-B Accident / Incident Information 3-C Daily First Aid Record, Form S14 3-D Employee s Report of Occupational Injury / Illness, Form S E Equipment Incident / Accident Report, Form S32 3-F Return To Work Notice, Form S G Medical Authorization, Form S H Written Reprimand Record, Form H617 3-I Verbal Reprimand, Form H J Monthly Accident Experience Report (MAER), Form S43 3-K Monthly Subcontractor Accident Summary Report, Form S SHE ACTION PLANS / SHE TASK ASSIGNMENT 4-A SHE Task Assignment Roster 4-B SHE Task Assignment: Tri-Fold, Form S20 4-R Action Plans (SHE) 5. SHE MONITORING ACTIVITIES 5-A Weekly Self Assessment Program 5A-1 Weekly Safety Assessment Report 5A-2 Safety Inspection Summary 6. EMERGENCY SERVICES 7. EMERGENCY EVACUATION PLAN 8. SEVERE WEATHER PLAN 9. SECURITY 10. SUBCONTRACTORS 10-A Contractor Qualification Form
2 10-B Contractor Qualification Evaluation Process 10-R Subcontractors 11. HOUSEKEEPING 12. HAZARDOUS WASTE MANAGEMENT PLAN 13. COMPETENT PERSON DESIGNATION 13-A Competent Person Designation Form 13-R Competent Person Designation PERSONAL PROTECTIVE EQUIPMENT 14. FALL PROTECTION DEVICES 14- A Static Lines 14-B Fall Hazard Management (APS 6-3) 14-B1 Fall-Arresting Equipment Inspection Report, Form S31-2) 14-B2 Fall Hazard Management Requirements Guidelines 14-BR Fall Hazard Management 14-R Fall Protection Devices 15. RESPIRATORY PROTECTION PROGRAM 15-A Respirator Medical Evaluation Questionnaire, Form S15 15-B Respirator Supplemental Information Guide, Form S C Physician s Recommendation Concerning Respirator Use, Form S D Respirator Fit Testing Record, Form S22 Copy of SEC-15DR1.doc 15-E Emergency Respiratory Protection Monthly Inspection Report, Form S42 OPERATIONS 16. COMPRESSED GAS AND OXYGEN CYLINDERS 17. BARRICADE TAPE PROGRAM 18. PERMITS (SPECIFIC TO PROJECT) 18-A Hot Work 18-AA Hot Work Permit 18-B Cold Work 18-BB Cold Work Permit 19. CONFINED SPACES 19-A Terms and Definitions 19-B Confined Space Entry Permit, Form S HAZARDOUS ENERGY CONTROL PROCEDURE 20-A Hazardous Energy Control Survey, Form S B Lock Cutting / Removal Authorization Form, Form S
3 20-C Lock-Out / Tag-Out Log 21. GROUNDING CONDUCTOR 22. WORKING ON OR NEAR EXPOSED ENERGIZED ELECTRICAL CIRCUITS/EQUIPMENT 22-A Request for Shutdown (Electrically Hazardous Task) 22-B Electrically Hazardous Task Plan (Written Job Plan) 23. POWDER ACTUATED TOOLS 24. EXCAVATIONS AND TRENCHING 25. PORTABLE LADDERS - CONTROL & INSPECTION 25-A Ladder Inspection Guide, Form S SCAFFOLDING 27. STEEL ERECTION 27-A Reinforcing Steel (Rebar) 28. CONCRETE OPERATIONS 29. RIGGING 29-A Rigging Practice/Inspections (APS 9-23) 29A-1 Rigging Equipment Inspection Report, Form S B Site Specific Rigging Specification Standard Copy (APS 8-13B) 29B Attachments 29-C Engineered Lift Procedure Administrative Practice For Rigging (APS 8-13A) 29C-1 Rigging Personnel & Qualifications 29C-2 Lift Classifications 29C-3 Green Lift Checklist 30. SYSTEM AND EQUIPMENT TEST AREA CONTROL PROCEDURE 30-A Piping Pressure Testing 30A-1 Piping Pressure Testing (APS 9-16) 30A-1 Attachments 31. FIRE PREVENTION/PROTECTION 31-A Flammable and Combustible Liquids (APS 7-1) MAINTENANCE/CONSTRUCTION EQUIPMENT 32. MOBILE EQUIPMENT 32-A Inspection Report Crane, Form S B Inspection Report Tractors, Loaders, Excavators, Forklifts, Form S C Inspection Report Trucks, Form S25-0-3
4 32-D Inspection Report General Line Equipment, Welding Machines, Air Compressors, Manlifts, Etc., Form S25 32-E Monthly Safety Inspection Checklist for Construction Equipment, Form S F Annual Crane Inspection Report, Form S CRANE LIFT PROCEDURE 33-A Crane Work Near Overhead Electric & Hazardous Pipelines 34. SUSPENDED MAN CAGE / PLATFORM 34-A Suspended Man Cage / Platform (APS 8-16) 34A-1 Suspended Man Cage / Platform Checklist, Form S A-2 Employee Properly Positioned In Suspended Man Cage 34A-3 Suspended Personnel Man Cage Authorization OCCUPATIONAL HEALTH 35. CONTROL OF RADIATION HAZARDS 36. HAZARD COMMUNICATION PROGRAM 36-A Hazard Communication Program Letter To All Employees 36-B Orientation To Hazard Communication 36-C Hazard Communication Training Record 36-D Sample Form List For Hazardous Chemicals 36-E Hazard Communication Compliance Checklist 36-F Glossary of MSDS Terms and Definitions 36-G Hazard Diamond 36-H Appendices 37. BLOODBORNE PATHOGENS 38. LEAD EXPOSURE CONTROL PROGRAM 38-A Guidelines for Managing Lead-Based Paint on Construction Management Projects 38-B Notice to Contractors 38-C Employee Exposure Assessment for Lead, Form S46 38-D Air Monitoring Record, Form S ASBESTOS HANDLING PROCEDURES 39-A Non-Friable Asbestos Handling Procedures 40. INORGANIC ARSENIC EXPOSURE CONTROL PROGRAM 41. TECHNOLOGICALLY ENHANCED NATURALLY OCCURING RADIOACTIVE MATERIAL (TENORM) 42. BENZENE
5 43. HYDROGEN SULFIDE H 2 S 44. HEARING CONSERVATION 45. HEAT STRESS MANAGEMENT APPOINTMENTS 47. EMPLOYEE COMMITTEE CHARTER 46-A Matrix
Business & Legal Reports (BLR) Training. Workplace Safety Online Courses. Accident Investigations. Aerial Lift Safety
Business & Legal Reports (BLR) Training Workplace Safety Online Courses COURSE TITLE Accident Investigations Aerial Lift Safety Americans with Disabilities Act - What Supervisors Need to Know Arc Flash
WORK PLACE SAFETY TRAINING
Click web link and follow directions: WORK PLACE SAFETY TRAINING https://safety.army.mil/training/distanclearningonlinetrainning/tabid/1210/de fault.aspx List of training classes: ATRRS: The Supervisor
J.J. Keller Safety Materials
J.J. Keller Safety Materials Using safety talks will allow your employees to analyze Real Life Stories and share what they feel the individuals did right and wrong, and what should happen next. Safety
Proposal # UFS# GEN 13.13 LCRA Contractor Health and Safety Questionnaire Form
LCRA Contractor Health and Safety Questionnaire Form This information is required by LCRA for the purpose of questionnaire of (potential) contractor selection. By administering this questionnaire, LCRA
SUB-CONTRACTOR/VENDOR PRE-QUALIFICATION QUESTIONNAIRE
Page 1 of 7 SUB-CONTRACTOR/VENDOR PRE-QUALIFICATION QUESTIONNAIRE GENERAL INFORMATION 1. Company Name/Contractors License No.: Telephone: SIC(s): Street Address: Mailing Address: 2. Officers: Years With
DVD PROD# PROGRAM TITLE LANGUAGES 0006006 ACCIDENT INVESTIGATION DETER ROOT CAUSE
0006006 ACCIDENT INVESTIGATION DETER ROOT CAUSE 0006464 Accident Investigation: Examining the Details English/Spanish 0006271 AERIAL LIFT SAFETY ENGLISH/SPANISH 0006178 AIR EMISSIONS 0006390 AMMONIA SAFETY
Online Training Course Library
Online Training Course Library FEATURED COURSES As the leader in online safety training solutions, ClickSafety practices Safety every single day. Our entire library of 300+ courses (with over 55 in Spanish)
Safety Training Needs Assessment
Safety Needs Assessment Form Instructions: Please review each question and either check YES or NO. If a question is checked YES you will be required to complete the training topic before initial assignment
PITTSBURG TANK AND TOWER CO., INC.
PITTSBURG TANK AND TOWER CO., INC. HEALTH, SAFETY & ENVIROMENTAL PROGRAM INDEX 1.SAFETY POLICY & MANAGEMENT RESPONSIBILITIES - Safety Policy - Administrative Duties * Top Management * Safety Director *
Gibson Door & Millwork, Inc.
Gibson Door & Millwork, Inc. Gold Award This is to certify that Gibson Door & Millwork, Inc. has successfully completed the ConstructSecure independent Construction Safety Assessment Program (CSAP).Gibson
SAFETY TRAINING CLASSES & SERVICES LIST
SAFETY TRAINING CLASSES & SERVICES LIST CUSTOM CLASS ROOM TRAINING AVAILABLE, BACKED WITH ON-SITE SUPPORT SAFETY, TRAINING COURSES OFFERED BY OUR CERTIFIED ELITE RISK CONTROL TEAM: EM 385-1-1 (Military)
ENVIRONMENT, HEALTH & SAFETY
ORACLE ENVIRONMENT, HEALTH AND SAFETY: CONTRACTOR SAFETY PROGRAM Oracle has a comprehensive and structured approach to sourcing third-party companies and contractors ( contractors ) to perform a variety
Course Description List
Course Description List Arc Flash This course is used to raise awareness about the specific electrical hazards of an arc flash. This course will also introduce a new CSA Standard on workplace electrical
OCCUPATIONAL SAFETY AND HEALTH RECORDS
Occupational Safety Records Occupational Safety OCCUPATIONAL SAFETY AND HEALTH RECORDS Numbers listed below refer to the applicable part from the WorkSafeBC Occupational Health and Safety Regulation and/or
OSHA SAFETY TRAINING TABLE for more information see www.osha.gov
OSHA SAFETY TRAINING TABLE for more information see www.osha.gov CATEGORY DESCRIPTION WHO RECEIVES HOW OFTEN AWAIR Requires employers to set up a written accident & injury reduction program based on clearly
Model Safety Program
Model Safety Program DATE: SUBJECT: Contractor Safety Verification Program REGULATORY STANDARD: OSHA 29 CFR RESPONSIBILITY: The, is solely responsible for all facets of this program and has full authority
Injury Prevention for the Construction Industry
Injury Prevention for the Workers in the construction industry encounter a variety of hazards, some of which can lead to serious injuries and fatalities. This fact sheet: Increases awareness of the primary
WELDING & CUTTING. Course Description:
WELDING & CUTTING This course attempts to discuss the two most common types of welding and cutting (gas and arc), the danger that are involved in working with them and the safety measure that can be undertaken
Employee Safety and Health Training Plan
Employee Safety and Health Training Plan Environmental Health, Safety, and Risk Management Department Box 6113, SFA Station Nacogdoches, Texas 75962-6113 Revised: January 2011 Purpose and Scope This plan
SITE CONTRACTOR PROCEDURES
SITE CONTRACTOR PROCEDURES Asset Collection Type B Assets are considered High risk ; the site activities must be in accordance with Graysonline contractor procedures and are to be collected by appointment
APPENDIX A AURA SAFETY AND HEALTH QUESTIONNAIRE FOR BIDDERS
APPENDIX A AURA SAFETY AND HEALTH QUESTIONNAIRE FOR BIDDERS Evaluation Criteria for Bidder Selection All bidders are required to complete the AURA Safety and Health Questionnaire for Bidders that will
Enviro Safety Products Resource Center. OSHA Checklist for General Industry
Enviro Safety Products Resource Center OSHA Checklist for General Industry The Occupational Safety and Health Administration (OSHA) require many standards to be met by businesses and industries. OSHA sets
Occupational Safety and Health Division Training Course Catalog
Occupational Safety and Health Division Training Course Catalog Improving the safety & health culture through education, training and outreach N.C. Department of Labor Occupational Safety and Health Division
Occupational Health and Safety Management Framework Abu Dhabi An Overview of Requirements
Occupational Health and Safety Management Framework Abu Dhabi An Overview of Requirements John Ewing Chartered Health and Safety Professional Agenda OSHAD an Introduction AD EHSMS RF Brief overview of
Training Needs Assessments Chart. Index of Training Requirements Job Description: or Employee:
1910.1200 Hazard Communication HAZCOM 1910.147 The Control of Hazardous Energy, Lock-out/Tag-Out 1910.212 Machines, General Requirements 1910.305 Electrical, Wiring Methods, Components & Equip. 1910.132
Occupational Health and Safety Officer
Occupational Health and Safety Officer APPLY TODAY participants at NO COST as a commitment to skills development in Northern BC. To determine your eligibility call Rob Bryce at 250-960-5982. ABOUT UNBC
ENVIRONMENTAL, HEALTH & SAFETY TRAINING PROGRAM DESCRIPTION TABLE OF CONTENTS PURPOSE...2 SCOPE...2 RESPONSIBILITIES...2 PRECAUTIONS / LIMITATIONS...
REVISION 2 PAGE 1 OF 11 Section TABLE OF CONTENTS Page PURPOSE...2 SCOPE...2 RESPONSIBILITIES...2 PRECAUTIONS / LIMITATIONS...3 PREREQUISITES / INITIAL CONDITIONS...3 PROCEDURE...3 Eligibility Requirements...3
Tennessee Gas Association
Environmental, Health, and Safety These courses promote sound work practices and are designed to satisfy many of the environmental, health, and safety regulations for initial and refresher employee training.
OSHA Training Guidelines (An Unofficial Summary)
OSHA Training Guidelines (An Unofficial Summary) Many standards promulgated by the Occupational Safety and Health Administration (OSHA) explicitly require the employer to train employees in the safety
OSHA Compliance Checklist ASC
OSHA Compliance Checklist ASC Date Inspectors Facility OSHA is the agency responsible for establishing and enforcing standards that will make the workplace safe and healthful for the employees. The way
Independent Contractor Policy
Independent Contractor Policy This Policy has been implemented to prevent accidents and personal injuries. It is not intended to be entirely inclusive. It is the responsibility of the Independent Contractor
Sample New Employee Safety Checklist
Sample New Employee Safety Checklist Supervisors must review the appropriate items from this list with each new employee. The Washington State Industrial Health and Safety Act (WAC 296-24-040) requires
BCIT. CNST 1100 Construction Safety Officer Training. Lesson Plan
BCIT CNST 1100 Construction Safety Officer Training Lesson Plan BCIT Two Week Outline- CNST 1100 (Please note there may be adjustments made to this outline) Monday- Day #1 Week #1 0730 Paperwork Introductions
OCCUPATIONAL SAFETY & HEALTH ADMINISTRATION OSHA COURSE DESCRIPTIONS
OCCUPATIONAL SAFETY & HEALTH ADMINISTRATION OSHA COURSE DESCRIPTIONS WWW.osha.gov/dte/edcenters/course_description.html Course Descriptions OSHA #500 - Trainer Course in OSHA Standards for Construction
Table of Contents Introduction How to Use This Manual How to Do a Facility Audit
Table of Contents Introduction How to Use This Manual How to Do a Facility Audit OSHA Plant Safety Audit Checklist: Self-Inspection Types of Hazards Addressing the Hazards in Your Work Area Safety and
Contractor Safety Management
1.0 Introduction Memorial University will ensure that a diligent contractor management process is established. This procedure establishes requirements for contract administration and oversight of contractor
Risk Management Department Safety & Worker s Compensation Training Classes
Risk Management Department Safety & Worker s Compensation Training Classes The following safety and worker s compensation training is available from Risk Management and is scheduled by contacting the Risk
810. Health and Safety Policy
Adopted: May 14, 2012 Model Policy 810 Revised: June 22, 2015 Orig. 2012. 810. Health and Safety Policy I. PURPOSE The Windom School District strives to provide a safe, healthy work and educational environment
AN OWNER S GUIDE FOR A CONTRACTOR HEALTH AND SAFETY MANAGEMENT PROGRAM
AN OWNER S GUIDE FOR A CONTRACTOR HEALTH AND SAFETY MANAGEMENT PROGRAM Febuary 1997 TABLE OF CONTENTS FOREWORD... 1 1.0 INTRODUCTION... 1 1.1 THE OBJECTIVE... 1 1.2 THE BENEFITS OF A CONTRACTOR HEALTH
Accident, Injury & Illness Program Training
CITY OF PHILADELPHIA RISK MANAGEMENT DIVISION Safety Directive #A-8 Revision #1 Title: Accident, Injury & Illness Program Training Purpose Training is one of the most important elements of any safety &
TEMPORARY EMPLOYEES SAFETY PROCEDURES
TEMPORARY EMPLOYEES SAFETY PROCEDURES Temporary Agencies will ensure that any temporary employee sent to work at Modern will have received and understand the General Safety Rules. GENERAL SAFETY RULES
WORKING IN CONFINED SPACES GUIDELINES
WORKING IN CONFINED SPACES GUIDELINES Contents 1 Introduction... 2 2 Scope... 2 3 Definitions... 2 4 Responsibilities... 3 4.1 Permit Authoriser... 3 4.2 Permit Receiver... 3 4.3 Responsible UOW Officer...
CONSTRUCTION SAFETY POLICY
California Institute of Technology CONSTRUCTION SAFETY POLICY Caltech Environment, Health, and Safety Office 1200 E. California Blvd., M/C 25-6 Pasadena, CA 91125 Phone: 626.395.6727 Fax: 626.577.6028
H-0123 Contractor Safety Program
H-0123 Contractor Safety Program SUBJECT: Contractor Safety H-0123 REVISION NO: 4 REFERENCES: 29 CFR190 29CFR1926 CP-04-201 Contract Labor CP-04-215 Contract Services CP-28-111 Badging P&P 40-19 CP-04-107
EMPLOYEE SAFETY TRAINING PROCEDURE
UNIVERSITY OF ALASKA FAIRBANKS SAFETY SYSTEM POLICY AND PROCEDURE DOCUMENT NUMBER: 301 ISSUE DATE: SEPTEMBER 1996 REVISION DATE: APRIL 2003 SUBJECT: Employee Safety Training Procedure EMPLOYEE SAFETY TRAINING
No: HSE- 100 Title: Contractor HSE Management Revised: 04-02-2014. Table of Contents
Table of Contents A. INTRODUCTION B. INDIVIDUAL RESPONSIBLITIES C. CONTRACTOR RESPONSIBLITIES 1. Environmental, Health and Safety Commitment 2. General Health, Safety and Welfare 2.1 Contractor Personnel
cdp CLASSROOM & CBT PRESENTATION MENU Classroom Presentations Individual CBT Training Client Presentations Extras & Tools Screen Resolution 1024 X 768
Disclaimer: These courses should be reviewed to assure that the information conforms to recommended procedures, as well as to any federal, state or local laws regarding any facility s operation. The producer
Get your OSHA and EHS training from an authorized OSHA Education Center. 2016 OSHA & EHS Courses
Get your OSHA and EHS training from an authorized OSHA Education Center. 2016 OSHA & EHS Courses Table of Contents OSHA 500 - Trainer Course in OSHA Standards for Construction...2 OSHA 501 - Trainer Course
Chapter 16: Sub-Contractor Management Plan
: Chapter Content CHAPTER CONTENT... 16.1 16.1 SUB-CONTRACTOR MANAGEMENT PLAN... 16.2 16.2 SUB-CONTRACTOR INFORMATION... 16.4 Chapter 1 Page 16.1 Chapter Content 16.1 Wapiti Gravel Suppliers is committed
CHAPTER 7 - OFFICE OF OCCUPATIONAL SAFETY AND HEALTH SUBCHAPTER 7A - GENERAL RULES AND OPERATIONAL PROCEDURES
CHAPTER 7 - OFFICE OF OCCUPATIONAL SAFETY AND HEALTH SUBCHAPTER 7A - GENERAL RULES AND OPERATIONAL PROCEDURES SECTION.0600 - SAFETY AND HEALTH PROGRAMS AND COMMITTEES 13 NCAC 07A.0601 PURPOSE AND SCOPE
BP OIL -- TOLEDO REFINERY
BP OIL -- TOLEDO REFINERY Document Type: Effective Date: August 8, 2014 Owner: J.D. Parker Refinery Wide Barricading of Hazardous Activities Authorized By: D. C. Durnwald (signature on file) No.: SAF 116
OHSAS 18001 Documentation SaskPower Contractor Health and Safety Management Program. Table of Contents
Contractor Health and Safety Management Program Contractor Information package Table of Contents Section I Contractor Health and Safety Management Program Policy... I-3 Contractor Health and Safety Management
Loss Control TIPS Technical Information Paper Series
Loss Control TIPS Technical Information Paper Series Innovative Safety and Health Solutions SM The Safety Audit: A Management Tool A major soft drink bottler, concerned about ergonomics and lifting hazards,
Construction Safety. OSHA Compliance. General Safety. DOT Compliance. Human Resources
The United Safety Council is pleased to provide this members only benefit to grant members access to online safety videos covering all OSHA Compliance and General Safety Topics. The different topics are
Process Safety Management of Highly Hazardous & Explosive Chemicals. Safe Work Practices
Process Safety Management of Highly Hazardous & Explosive Chemicals Safe Work Practices Safe Work Practices 1910.119(f)(1) The employer shall develop and implement safe work practices to provide for the
Confined Space Procedures
Confined Space Procedures Table of Contents Purpose... 2 Primary Objectives... 2 Operational Objectives... 2 Legislation... 2 Definitions... 2 Responsibilities... 4 1. Vice-President (Administration) 2.
J. J. KELLER S 5-MINUTE WORKPLACE SAFETY TALKS
Acrylonitrile Air Contaminants How Much Is Too Much? Air Contaminants Standard Alcohol- and Drug-Free Workplace Anhydrous Ammonia Refrigeration Units Asbestos Automated External Defibrillators (AEDs) Behavior-Based
Safety and Health Office WORKPLACE SAFETY CHECKLIST
Location: Date: Inspected by: Safety and Health Office WORKPLACE SAFETY CHECKLIST WORK ENVIRONMENT Ventilation Removal of fumes and dust Temperature and humidity control Noise levels Vibration Lighting
HSE Requirements for Contractors
PROJECT DEFINITION AND CONTACTS Project Title: Kodak is obligated to identify any known and potential Health, Safety, and Environmental (HSE) hazards to individuals who might be affected by them. This
Classification: SAFETY PROGRAM. Accountabilities
Program #SAF-CON-P-01 Page: 1 of 21 Authorization Cover Letter Responsible Person: Manager of Safety Training Code: Target Audience: Ontario Operations Key words: Contractor, Training, Contract, Accountabilities
What the OHS Act says about the training responsibilities of constructors, employers, and supervisors
REQUIRED Pull-out chart TRAINING Construction Health and Safety in Ontario The Occupational Health and Safety Act (OHS Act) requires constructors and employers to provide worker training. Specific requirements
Contractor Environment, Health and Safety Management Plan
EHSMS10 Contractor and Supplier EHS Management Contractor Environment, Health and Safety Management Plan Purpose Guidelines Record Keeping This template provides an example to Santos Contractors of the
1.0 GENERAL REQUIREMENTS
MS21-STD1-RD1-EPCOR HSE Requirements Page 1 of 20 EPCOR HSE REQUIREMENTS RELATED DOCUMENT Last Reviewed: 2014 Aug. 28 Version: 01 MS21-STD1-RD1 CONTENTS 1.0 GENERAL REQUIREMENTS... 1 2.0 EPCOR HEALTH,
INTRODUCTION... 3. 1.0 Purpose... 4. 2.0 Policy... 4. Exception for Short-Term Workplace Visits... 4. Relevant Legislation and Regulations...
March 2006 INTRODUCTION... 3 1.0 Purpose... 4 2.0 Policy... 4 Exception for Short-Term Workplace Visits... 4 Relevant Legislation and Regulations... 5 Definitions... 5 Contractor Safety Coordination Overview...
Conducting a Job Hazard Assessment. Environmental, Health and Safety 275-3241
Conducting a Job Hazard Assessment Environmental, Health and Safety 275-3241 EH&S Programs: Fire Safety Blood Borne Pathogens Hazard Communication Personal Protective Equipment Emergency Preparedness General
A. a security guard B. a competent scaffold erector C. your boss D. the ship repair manager
01 If a worker is injured at work, he should. A. make sure it does not affect his work B. continue working until he is not able to C. go home to rest immediately without informing his employer or supervisor
WHS Contractor Management Procedure
Procedure Approved: 09/07/2013 Next Review: 09/07/2015 1. Overview The District council of Mount Remarkable Council is committed to engaging quality Contractors who have a sound understanding and commitment
TECHNICAL INFORMATION
Page: 1/6 This checklist recognizes the major accident hazards found by experience of previous HAZID studies. It is not intended to be totally exhaustive and feedback from users should be incorporated
OSHA Training Institute Education Centers Course Descriptions
U.S. DEPARTMENT OF LABOR Occupational Safety and Health Administration (OSHA) OSHA Training Institute Education Centers Course Descriptions www.oshamidatlantic.org 800-875-4770 U. S. D E P A R T M E N
Injury and Illness Prevention Plan (IIPP) University of Nebraska-Lincoln
Environmental Health and Safety Injury and Illness Prevention Plan (IIPP) University of Nebraska-Lincoln Revised March 2011 UNL Environmental Health and Safety 3630 East Campus Loop Lincoln, Nebraska 68583-0824
Section 2 Hazard Assessment and Risk Control Table of Contents
Section 2 Hazard Assessment and Risk Control Table of Contents 2.1 INTRODUCTION... 2 Class A Hazard... 3 Class B Hazard... 3 Class C Hazard... 3 Class D Hazard... 3 2.2 HAZARD ASSESSMENT... 4 2.2.1 Hazard
Construction Trades Safety Training and Practices. Presented By: James B. Asbury, MS, MBA, CSP, CIH
Construction Trades Safety Training and Practices Presented By: James B. Asbury, MS, MBA, CSP, CIH Agenda Parkersburg-Marietta Contractors and Trades Education and Development Fund Educational and Development
WHS Induction Series. 36 Toolbox Talks. Contents
36 Toolbox Talks 3-5 minute toolbox talks for induction or refresher safety training. Having regular training programs that educate your workers about workplace issues has never been easier than now with
A Workplace Accident and Injury Reduction (AWAIR) Program for Small Construction Employers
A Workplace Accident and Injury Reduction (AWAIR) Program for Small Construction Employers May 2012 Minnesota Department of Labor and Industry Occupational Safety and Health Division This material can
A Workplace Accident and Injury Reduction (AWAIR) Program for Small Construction Employers
A Workplace Accident and Injury Reduction (AWAIR) Program for Small Construction Employers June 2000 Minnesota Department of Labor and Industry Occupational Safety and Health Division This material can
ENVIRONMENT MANAGEMENT PLAN
HEALTH SAFETY AND ENVIRONMENT MANAGEMENT PLAN HEALTH SAFETY AND ENVIRONMENT MANAGEMENT PLAN DOCUMENT No.: PL01 DATE 19/02/2012 DOCUMENT TYPE : Plan TOTAL PAGES : 48 APPROVED: Craig Dunlop AMENDMENT DATE
CONTRACTOR SAFETY POLICY
CONTRACTOR SAFETY POLICY Revised September 2012 TABLE OF CONTENTS COMPLIANCE ACKNOWLEDGMENT COMPLIANCE GENERAL SAFETY REQUIREMENTS/HOUSEKEEPING INSURANCE COVERAGE SIGN IN AND OUT INCIDENT REPORTING CHEMICAL
Sample Loss Control Program
Sample Loss Control Program November 15, 2006 Re: Accident Prevention Program The following is important tool that can be used to assist you in the development of a company specific Accident Prevention
OSHA Construction, General Industry and HAZWOPER Catalog
OSHA Construction, General Industry and HAZWOPER Catalog OSHA Construction Industry 900-01 OSHA 10 Hour Construction Industry Outreach Training OSHA 10 Hour Construction Outreach Training Course. The 10-hour
KUMC. Medical Surveillance Program
KUMC Medical Surveillance Program INTRODUCTION Employees at KUMC could potentially be exposed to safety hazards such as chemical, biological, and physical hazards. These hazards are most likely to occur
[HEALTH AND SAFETY PROGRAM] The Corporation of the Town of Huntsville Version Control By: Human Resources Department V.01.11
![[HEALTH AND SAFETY PROGRAM] The Corporation of the Town of Huntsville Version Control By: Human Resources Department V.01.11](/thumbs/26/8504203.jpg "[HEALTH AND SAFETY PROGRAM] The Corporation of the Town of Huntsville Version Control By: Human Resources Department V.01.11")
2011 The Corporation of the Town of Huntsville Version Control By: Human Resources Department V.01.11 [HEALTH AND SAFETY PROGRAM] The following health and safety loss control program together with previously
CONSTRUCTION SAFETY & HEALTH MANAGEMENT SYSTEM
CONSTRUCTION SAFETY & HEALTH MANAGEMENT SYSTEM (ACCIDENT PREVENTION PROGRAM) Written Sample Resources SP #1 (Revised 03/11) INTRODUCTION This document is a tool to give assistance in developing a written
Getting the occupational safety basics organised
Getting the occupational safety basics organised 10 important measures Introduction Occupational health and safety are the foundation of wellbeing at work. The employer is responsible for providing safe
This program is listed as a mandatory inspection item on the MnOSHA Investigation Checklist, Item 7D.
Standard: Summary: Coverage: Workplace Accident and Injury Reduction Program RESOLUTION NO# 0809-88 Minnesota Statutes 182.653, A Workplace Accident and Injury Reduction Program Minnesota Rules 5205.1500,
Skanska Sweden s General Conduct and Safety Rules. Content
1 (8) Note In case of issues regarding interpretation of this document, the Swedish original document prevails. Content Our work environment 2 Risks at work 2 Safe behaviour 3 Information and qualifications
CONFINED SPACE ENTRY (PROJECT STANDARDS AND SPECIFICATIONS) KLM Technology Group
Page : 1 of 34 Project Engineering Standard www.klmtechgroup.com KLM Technology #03-12 Block Aronia, Jalan Sri Perkasa 2 Taman Tampoi Utama 81200 Johor Bahru Malaysia TABLE OF CONTENTS Purpose 2 Scope
GLO BAL SOLUTIONS TM. Online Training Course Catalog
GLO BAL SOLUTIONS TM Online Training Course Catalog Looking for a specific course? Quick Search in Adobe Reader Right click your mouse and choose the search option. Enter the word, phrase or course you
4. How often should vehicles being used at worksites be inspected?
Notes for Scoring: The correct answer is highlighted in yellow. The source for the answer is listed in red. 1. Ground Fault Circuit Interrupters (GFCI) are required by the National Electrical Code: a.