22 24 June, 2009 SpOrt Stuttgart Germany. Welcome. Stuttgart

Transcription

1 22 24 June, 2009 SpOrt Stuttgart Welcome to Stuttgart Organizer: in cooperation with:

2 Table of Contents Georg Simon Ohm University of Applied Sciences Nuremberg, September, 2009 KEYNOTES Josef Nassauer Bayern Innovativ GmbH, Jeff Offutt George Mason University, USA Do samma daham Introduction Program Greetings 4 Data & Facts 6 Location/Travel/Accomodation 7 Socializing 9 Program Committee 10 Keynote Speakers 12 Tutorial Speakers 17 Program 20 Vipul Kocher PureTesting, India Exhibition Exhibition Map 24 Petra Wanzki - Fotolia.com Peter Liggesmeyer University of Kaiserslautern / Fraunhofer IESE, REGISTER NOW! info@conquest-conference.org Exhibitiors 2 Partner Country Partners Main Sponsor Organizer INDIA Important Numbers: Police 110 Ambulance 112 Fire Department 112 Contact: Constanze Zemlin Mobile: +49 (0) Phone.: info@spice-days.com 3

3 Introduction Introduction Greeting from Hans-Jürgen Kugler Conference Chair In my research and my consulting work I often hear Do really I have to ensure my developers work according to SPICE?, Who pays for all the extra effort?, What do I gain?, I do not want to limit the innovative ability of my developers!, or simply What is SPICE? If you are looking for answers to these or similar questions from those who have experienced the effects of transforming development organisations and supply relationships in accordance with SPICE, the International SPICE Days 2009 are the place to be. The International SPICE Days are the premier event for exchanging experience, learning about what lies ahead, and last but not least networking in a professional but relaxed atmosphere. SPICE, or better ISO 104, has shown its value through application in many different domains, from automotive to telecommunication. The rapid development of software and software-determined systems is characterised by increasing specialisation in new application domains bringing new requirements, demanding industrialisation to master complexity and achieve efficiency, and expanding globalisation of the software ecosystem both in development cooperation and product and service deployment. Can SPICE keep up the pace and help businesses and users to turn some of the inherent risks of the software revolution into chances of success? Your contribution is invited to allow the International SPICE Days 2009 to answer this question. Come and join us in Stuttgart. Sincerely, Hans-Jürgen Kugler Greeting from Dr. Reha Tözün Stuttgart Region Economic Development Corporation Stuttgart Region Economic Development Corporation We, Stuttgart Region Economic Development Corporation, are the central contact for investors and companies in the City of Stuttgart and the five neighbouring counties. As a public agency, we raise awareness of the qualities that our region has to offer e.g. as an excellent business location for high-technology sectors and support companies setting up here. I would like to express our pleasure to host this year s SPICE Days and its international participants in Stuttgart. The SPICE Days as an international platform drive the essential life-longlearning and qualification efforts for software specialists from different sectors. It is a valuable contribution to our efforts to stimulate dialogue within and across sectoral networks. Stuttgart region is renown for automotive industry, and this is not only because it is here that the first motor vehicle was patented by Gottlieb Daimler. Today, Stuttgart has an outstanding automotive cluster, where intensive R&D activities are carried out by OEMs, suppliers and through a dense fabric of academic and research institutions. What is less known about Stuttgart is its burgeoning software cluster, which has been on a steady growth path. Combining their skills in software technologies with the specialized know-how available in diverse sectors in the region, software enterprises of Stuttgart deliver outstanding results. I and my colleagues are by all means ready to assist you in finding answers to all your questions about Stuttgart region as a business location and the services we offer at this year s Spice Days. Sincerely, Dr. Reha Tözün 4

4 Data & Facts Location/Travel/Accomodation SPICE Days in Stuttgart Location How to get there Baden-Württemberg is the birthplace of the car and the automotive industry. The automotive industry is traditionally a fairly focused grouping of manufacturers and suppliers. The advent of electronics and software in and around the car is changing the industry significantly. In times of change it is important to keep a community spirit of all those involved for the benefit of the whole industry. This is the motto of the International SPICE Days strengthen the community to foster progress. Stuttgart as the capital of Baden-Württemberg is historically the right place to be for this. The Royal Württemberg Automobile Club was founded here, the oldest still functioning automotive community association. The decisive meeting to engage with ISO 104 in the form of Automotive SPICE also took place in Stuttgart. Today the automotive industry can claim to have initiated the most widespread use of ISO 104 derived process assessments of any software intensive industry. With a conference location in Stuttgart, it is only natural that the International SPICE Days should focus on the lessons learned from this industry-wide adoption and what the plans for the future are. Moving from improvement of single organisations to attempting to improve a whole value creation network is an undertaking many other industries may be able to draw benefit from. Sport, Bildungs- und Dienstleistungszentrum GbR Fritz-Walter-Weg Stuttgart. Registration and Information Desk Sport, Bildungs- und Dienstleistungszentrum GbR Next to the entrance. Monday, June 22 09:00 18:30 Tuesday, June 23 08:00 18:30 Wednesday, June 24 09:00 17:00 Wardrobe Wardrobe is located next to the registration desk and will be available during the opening hours of the registration (see above). Wireless Access Wireless Internet connectivity will be provided. You must supply your own wireless laptop or computer to use this service. For further information, please visit the registration desk. BY CAR From Heilbronn A81, EXIT Stuttgart-Zuffenhausen - B10 in direction Esslingen/Ulm - B14 in direction Waiblingen, EXIT Bad Cannstatt/Untertürkheim From München/Ulm A8, EXIT Wendlingen - B10 in direction Esslingen/Ulm - B14 in direction Waiblingen, EXIT Bad Cannstatt/Untertürkheim From Karlsruhe/Pforzheim and Bodensee/Sindelfingen A8, EXIT Stuttgart-Vaihingen. Follow the signs to Stuttgart centre. - B14 in direction Waiblingen, EXIT Bad Cannstatt/Untertürkheim After Leaving B14 at the gateway Bad Cannstatt/ Untertürkheim Benzstraße, drive toward the Mercedes-Benz Arena - pass the parking garage located to your left. After about 300 meters, turn left into Martin-Schrenk-Weg. At the right you can see SpOrt Stuttgart. Parking will available for Spice Days participants directly at the SpOrt Entrance (Fritz-Walther-Weg). BY TRAIN Arrival by commuter railway system (S-Bahn) From main station Stuttgart take railway S1 in direction Plochingen. Leave the railway at station Mercedes- Benz Arena. From there you have to walk only a few minutes to SpOrt Stuttgart. BY BUS Take Bus line 1 in direction Mercedes-Benz Welt. The bus leaves at Bad Cannstatt station. Get off at the station called Fritz-Walter-Weg. From there you have to walk only a few minutes. BY AIRPLAINE Take the bus line A or the railway from airport Stuttgart to the main station. Then take railway S1 in direction Plochingen. Leave the railway at station NeckarPark/ Mercedes-Benz Arena. From there you have to walk only a few minutes to SpOrt Stuttgart

5 Location/Travel/Accomodation Social Event Hotels SOCIAL EVENT Twilight Dinner Cruise Participants of the International SPICE Days 2009 are invited to take advantage of the following special rates for accommodation. For information and booking, please contact: Windrose Fernreisen GmbH Constanze Zemlin Phone: Fax: Hilton Garden Inn Stuttgart Neckarpark**** Ideally located in walking distance to the conference venue (approx. 900 m / 6 min) Mercedesstraße 7 D Stuttgart Single Room 149,00 per night Double Room 166,00 per night Breakfast included GHOTEL hotel & living Stuttgart*** Located 2,2 km from the conference venue Wildunger Straße D Stuttgart Single Room 89,00 per night Double Room 89,00 per night Breakfast included MERCURE Hotel Bad Cannstadt*** Located 3, km from the conference venue Teinacher Strasse 20 D Stuttgart Single Room 90,00 per night Double Room 110,00 per night Breakfast included Stuttgart - this year s conference venue is a magnificent location on the banks of the River Neckar and at the heart of one of s main winegrowing region. It s already a tradition that we discover the Spice Days region from the river side of life and so we will proceed this year. On a 4 hours boat trip on the Neckar River we will pass the Stuttgart city region as well as the beautiful green surroundings. While having a chat on board with your colleagues, typical food and regional wines will be served. After sitting all day long on the conference rooms you will surely be happy to shake hands and feet on the dance floor. Come on - join us for the Social Event 2009! Meeting point: 23 June - 18:30 at reception Bus shuttles will bring you to Stuttgart Wilhelma boat landing place. Busses will return to SpOrt Stuttgart at approx. 23:00. Stuttgart Tourist Information i-punkt Königstraße 1a Stuttgart Phone.: +49 (711) Fax: +49 (711) Opening hours Mon.- Fri.: 09:00 20:00 Sat.: 09:00 18:00 Sun. & holidays: 11:00 18:

6 Program Committee Program Committee The SPICE Days Program Committee, which is made up of experts from economy and science, supports the conference actively with the distribution of the Call for Papers to make the conference known in their community and among their partners. They review the contributions and help to select a high-quality program. Conference Chairs: Program Committee: Pierre Metz SynSpace AG Sergiy Ryapolov SOFT-RATING Ukraine Hans-Jürgen Kugler Lero The Irish Software Engineering Research Centre, Ireland Klaus Dehmel Delphi Deutschland GmbH Ludger Meyer Siemens AG Clenio F. Salviano Centro de Tecnologia da Informação Renato Archer (CTI), Brasil Jörg Zimmer Daimler AG Lars Dittmann Volkswagen AG Jan Morenzin VDA Jean-Martin Simon Qualium France Vice Chairs: Gebhard Loew Mathematische Dienste Loew Markus Müller Kugler Maag Cie GmbH Sasabe Susumu JUSE Japan Peter Bölter intacs e.v. Albert Kreitmeyr Audi AG Thomas Peisl Hochschule München Garcia Suz SEI USA Bernd Hindel Method Park Software AG Richard Messnarz ISCN GmbH Austria Kevin Ryan Lero The Irish Software Engineering Research Centre Bhaskar Vanamali Kugler Maag Cie GmbH

7 Keynote Speakers Keynote Speakers Keynotes on 23 June 2009 Dr.-Ing. Alfons Weißbrich (Volkswagen AG), Chairman of both the quality management committee of VDA and the advisory board of the VDA QMC Dr.-Ing. Alfons Weißbrich of Volkswagen AG will give the opening keynote of the International SPICE Days on 23 June 2009 in Stuttgart. After starting his career at Volkswagen AG in 1982 Dr. Weißbrich held different executive positions in the automotive industry at Volkswagen AG and Webasto AG for more than 20 years. In 1990 Dr. Weißbrich joined Webasto AG where he started as the head of roof systems development. He became Director of Group Research and Development and Customer General Manager in 199. Back to Volkwagen AG in 2002 he was first assigned Director of Quality Assurance Purchasing within Group Quality Assurance and from 200 to 2008 Director of Group Quality Management. Since 2007 he is the chairman of both the quality management committee of VDA and the advisory board of the VDA QMC (i.e. Verband der Automobilindutrie, Automotive Industry Association). Prof. Dave Thomas (Bedarra Research Labs), Founder/ Chairman The second keynote will be given by Prof. Dave Thomas will give a glimpse of the Future of Embedded Software Development. He will pose the question if and how the SPICE community prepares itself for this. Be prepared to be challenged. Breadth of Business Experience... Dave Thomas has a wide spectrum of experience in the software industry as an engineer, consultant, architect, executive and investor. He is the Founder and Chairman of Bedarra Research Labs a company specializing in emerging software technologies and applications. Bedarra provides virtual CTO and CEO, as well as directors, advisors and business mentors to support new initiatives. He is also the Managing Director of Object Mentor a company specializing in the training and deployment of Agile and Object-Oriented Software Development methodologies. Proven Track-Record of Success... Dave has repeatedly demonstrated how to deliver quality software on time and on budget. He is best known as the founder and past CEO of Object Technology International Inc. (formerly OTI, now IBM OTI Labs) where he led the commercial introduction of object and component technology. The company is often cited as the ideal model of a software technology company and was a pioneer in Agile Product Development with a process called Just-In-Time Software. Throughout his career, he has worked with major global corporations as well as startups on business and technical strategy, development organization and process, as well as competitive analysis and strategy. Visionary Thinker... Dave has a unique ability to translate research breakthroughs into competitive products. He was the principal visionary and architect for IBM VisualAge Smalltalk and Java tools and virtual machines including the popular open-source, multi-language Eclipse.org IDE. OTI pioneered the use of virtual machines in embedded systems with Tektronix shipping the first commercial products in He was instrumental in establishing IBM s Pervasive Computing efforts. Industry-Recognized Expert... He is a popular, humorous, albeit opinionated keynote speaker with a unique breadth of business experience and technical depth. He is widely published in software engineering literature. Dave remains active in various roles within the technical community including ECOOP, AOSD, JAOO, Agile Development Conference, OOPSLA Onward, ENASE and Dynamic Language Symposium. He is an adjunct research professor at Carleton University and the University of Queensland as well as a founding director of the Agile Alliance, an ACM Distinguished Engineer, President of AITO and an advisor for IEEE Software. He also writes an expert column in the Journal of Object Technology. Inspiring experience using Automotive SPICE will be shared with you in our two Special Keynotes at noon given by SZE Chen Tat of Continental Automotive, Singapore, and Jerzy Kowalczuk of Delphi Electronics & Safety, USA. Hear first hand accounts of grappling with higher level of SPICE and of meeting the challenges of global business

8 Keynote Speakers Keynote Speakers Keynotes on 23 June 2009 Chen Tat Sze (Continental Automotive Singapore Pte Ltd.), Head of Quality & Process SZE Chen Tat is Head of Quality & Process at Continental Automotive Singapore Pte Ltd. Together with his team, he has moved Continental Automotive Singapore from a Level 2 to Level 4 CMMI & SPICE organization. SZE Chen Tat holds a Masters in Business Administration as well as a Bachelor of Engineering (Hons). Continental Automotive Singapore Pte Ltd has been doing process improvement successfully for many years. This Presentation aims to share the experiences of the organization in their improvement journey to CMMI Level 4 and SPICE Level 4. It will also discuss the how SPICE is implemented in combination with other models and how SPICE supports industrialisation and globalisation for the organization. Jerzy Kowalczuk (Delphi Electronics & Safety), Manager of Systems/Software Process Improvement and Quality Assurance Jerzy Kowalczuk is a manager of Systems/Software Process Improvement and Quality Assurance at Delphi Electronics & Safety in Kokomo, Indiana (USA). Jerzy has over 30 years of combined experience in engineering and research within the automotive industry. He has participated and led the development of many Embedded Automotive Systems & SW projects. His experience includes both technical and managerial roles for automotive Safety, Control and Security, and Entertainment & Communication with major emphasis on Powertrain. Recently, Jerzy has worked closely with engineering and management staff at global sites to rollout the Common SPiCE Compliant Process and helped to build the Functional Safety capability. He has worked for both General Motors and Delphi Automotives and has held numerous leading roles in both Europe and the Americas. Approaching the monumental task of improving and modifying a company s processes is in most cases time consuming and overwhelming. This presentation discusses the complexity of that venture and provides a realistic road map to overall process improvement. The goal of the presentation is to address the aspects of process improvement, with focus on compliance to the industry standards, that each global company faces during this challenging time of restructuring and adaptation to the current market environment. The focus is on the high level aspects of the SPiCE process and how SPiCE aids in cohesiveness and exceeding customer expectations while meeting global business objectives. This presentation showcases the experience of a global corporation, but provides meaningful insight to smaller companies and highlights the benefits of this process. Keynotes on 24 June 2009 The second day will open with a focus on functional safety. Christoph Jung will explore the implications for products. Are there differences? Come and find out! Prof. Mike Hinchey will conclude with another look ahead into the future. He will tie product and process view, new development and wide scale integration together, since in his view the future belongs to Evolving Critical Systems. Dipl.-Ing. Christoph Jung (BMW AG) Born in 1962, Christoph Jung studied mechanical engineering at the TU Munich and started his career at MAN Nutzfahrzeuge AG within different international research projects (PROMETHEUS, MOTIV, ). This was followed by responsibilities as project manager for the serial development of the Stadtlastwagen 2000 and driver assistance systems Active Cruise Control ACC and Lane Departure Warning and further predevelopment projects. Christoph Jung joined BMW AG in 2000 and was responsible for definition, introduction and operation of the functional safety process as Manager of the Functional Safety Central Team from 2001 to In 2004 he became chairman of the VDA Standardisation Committee NA AK16: tion of ISO 26262: Road vehicles Functional safety Part 1-9. Functional Safety and was appointed as convenor of ISO TC22 SC3 WG16: Functional Safety since 200. ISO TC22 SC3 WG16 is responsible for the preparation and finalisation

9 Keynote Speakers Tutorial Speakers Keynotes on 24 June 2009 Tutorial Speaker I Tutorial Speaker II Prof. Mike Hinchey (Lero the Irish Software Engineering Research Centre), Co-Director Mike Hinchey is Co-Director of Lero the Irish Software Engineering Research Centre and Professor of Software Engineering at the University of Limerick. Prior to joining Lero, Dr. Hinchey was Director of the NASA Software Engineering Laboratory and continues to serve as a NASA expert. Hinchey holds a B.Sc. in Computer Systems from University of Limerick, an M.Sc. in Computation from University of Oxford and a PhD in Computer Science from University of Cambridge. The author/editor of several books on various aspects of Software Engineering, at various times Hinchey previously held positions as Professor in Australia, UK, Sweden and USA. He is currently Chair of the IFIP Technical Assembly and Chair of IFIP Technical Committee 1 (Foundations of Computer Science) as well as Editor-in-Chief of Innovations in Systems and Software Engineering: a NASA Journal (Springer). Foto: Jochen K - Fotolia.com Peter Bölter, intacs e.v. & SQS AG SPICE Crash Course SPICE (= Software Process Improvement determination) is used in the market as a synonym for ISO104, the international standard for Software Process Improvement. In simple words the tutorial contains these topics: What should be part of an assessment How to perform an assessment Examples of Assessment Models (ISO104-, automotivespice ) SPICE was developed to allow comparison of assessment results and to support tailoring of assessment content to different scopes, i.e. different sizes of companies or different focus like supplier assessment or project assessment etc. This tutorial gives an overview of SPICE for managers or software and system developers. It is accepted as a fresh up for assessors who have not passed the exam or to fulfil the assessor certification criteria for trained assessors (training older than 1 year, training provider not accredited etc.). This tutorial is not a full training for assessor qualification! Dr. Pierre Metz, SynSpace GmbH, Process specific Interpretations for the Generic Practices of Capability Levels 2 and 3 For both process practictioners and assessors it is necessary to interpret the Generic Practices of Capability Level 2 and 3 specifically for each process. However, there has been a lot of controversy, open and recurring questions on how to understand these indicators in practice. The aim of this tutorial is to offer comprehensive process-specific interpetations and guidance for Capability Level 2 and 3 that have been collected in the domains automotive, aerospace, medical devices. All Generic Practice interpretations are presented twofold, i.e. from the two different perspectives Practical hints for process implementers and Rating guidance & pitfalls for assessors allowing both types of audiences to benefit from the tutorial. The tutorial takes an interactive approach, i.e. it motivates active discussions and contributions on industry examples and even rating best practices from the participants thereby eliciting fruitful information for everybody

10 Tutorial Speakers Tutorial Speakers Tutorial Speaker III Tutorial Speaker IV Tutorial Speaker V Tutorial Speakers VI Fred Kaminski (l), Collossus Consulting, & Alexander Auerbach (r), netcmm GmbH, Demonstration of real traceability The tutorial presents a real-life example from the automotive domain on how to establish traceability in the development processes. The processes ENG2 to ENG10 are covered. Foundation of the demonstrated solution is the method of component-based modelling. This tool-supported approach incorporates modern software engineering techniques like code-generation, componentorientation and modelling. It will be shown that these techniques allow establishing full traceability over the whole lifetime of a software system without overhead. Besides the core topic traceability the following topics are also covered: Change management and impact analysis Functional testing and functional safety Off-shore testing Reliability of software documentation Chen Tat Sze, Continental Automotive Singapore Pte Ltd., Singapore Building a High Maturity Organisation Understand the past, Control and improve the present and Predict the future. - To be able to do so quantitatively, is the basis for factual management and systematic process improvement. This workshop aims to share with participants the implementation experiences of Continental Automotive Singapore Pte Ltd in high maturity practices of SPICE. It will also share concepts and strategies for building effective process performance models to achieve quantitativeprocess objectives and ultimately to support the business goals. Dr. Janos Ivanyos, Memolux Ltd, Hungary Implementing ISO/IEC 104 for IT Management and Internal Financial Control Processes Major governance scandals, independently from the recent global financial and economic crisis, call the attention that not only the basic business operations need to be assessed, audited or certified to the conformance with specific standards like ISO/IEC 104, but also all corporate governance related processes. The Satyam case shows that even those big IT companies, which are committed to quality and process improvement issues, can fail to avoid financial crimes of executive management. ISO/IEC 104 assessors and consultants have the responsibility to call the attention of their clients (both internally and externally) that their knowledge and experiences gained from their software related core business domains are reusable for improving governance capabilities. This tutorial will cover issues of how the mostly referred COBIT and COSO frameworks can be applied as conformant process reference models and how the ISO/IEC 104 capability measurement methodology supports management to evaluate effectiveness of IT and financial control systems. Interest Group Automotive Eclipse (currently members from Bosch, Eclipse Foundation, Itemis, KUGLER MAAG CIE, and other members of the Eclipse Community) Towards an Automotive Tool Platform Based on Eclipse Automotive SPICE assessment findings often reflect critically on practices deployed to handle requirements, to scale testing, and dealing with traceability up- and downstream. The complexity of the processes would be reduced by an integrated tool platform dedicated to automotive needs. Eclipse has become a de-facto standard for tool environments in other industries. Eclipse is not just a tool suite, but the basis of an ecosystem. The workshop will present Eclipse, the Interest Group Automotive Eclipse, its objectives and status and invite participants to join the initiative: rationale and goals of the Interest Group, introduction to Eclipse, Eclipse in systems engineering (this includes, several contributions on development and testing), ecosystems - new directions in supply network organisation, status and roadmap for an automotive Eclipse What challenges would derive from a wide-spread adoption of Eclipse, especially for the development processes. Would Eclipse and Automotive SPICE be synergetic or hinder each other? What needs to be done to ensure a positive outcome?

11 Program Program Monday, June 22, Day 1 9:00 Tutorial/Workshop Registration Tutorial I Tutorial II Tutorial III 9:30 I SPICE Crash Course Peter Bölter intacs, SQS, 11:00 Coffee Break 11:30 I ISPICE Crash Course Peter Bölter intacs, SQS, 13:00 Lunch Break 14:30 IV Building a High Maturity Organisation Chen Tat Sze Continental Automotive, Singapore 1:30 Coffee Break 16:00-17:30 IV Building a High Maturity Organisation Chen Tat Sze Continental Automotive, Singapore II Process specific Interpretations for the Generic Practices of Capability Levels 2 and 3 Pierre Metz SynSpace, II Process specific Interpretations for the Generic Practices of Capability Levels 2 and 3 Pierre Metz SynSpace, 12:00 14:00 public examinations V Implementing ISO/IEC 104 for IT Management and Internal Financial Control Processes Janos Ivanyos Memolux, Hungary V Implementing ISO/IEC 104 for IT Management and Internal Financial Control Processes Janos Ivanyos Memolux, Hungary III Demonstration of real traceability (SPICE Process Group ENG 2 10) Fred Kaminski Collossus Consulting, Alexander Auerbach netccm, III Demonstration of real traceability (SPICE Process Group ENG 2 10) Fred Kaminski Collossus Consulting, Alexander Auerbach netccm, VI Towards an Automotive Tool Platform Based on Eclipse Various Speakers VI Towards an Automotive Tool Platform Based on Eclipse Various Speakers Tuesday, June 23, Day 2 8:00 Conference Registration 9:00 Opening Keynote Spicy Cars - Is AutoSPICE important for automotive industry? Dr. Ing. Alfons Weißbrich, Volkswagen AG, 10:00 Coffee Break Session 1 Industrialisation Session 2 Specialisation Session 3 Globalisation 10:30 A1 Software Process Improvement activities in VDA Jan Morenzin VDA-QMC, 11:10 A2 Knowledge Services for the SPICE Community Richard Messnarz EuroSPI, ISCN, Ireland 11:0 A3 News from SPICE and intacs Peter Bölter intacs, SQS, B1 Enterprise SPICE Ernest Wallmüller Qualität & Informatik, Switzerland B2 VDA: Mapping CMMI -> Automotive SPICE Albrecht Wlokka Bosch, B3 COMPETISOFT: Using ISO/IEC 104 and ISO/IEC to process improvement in small companies Francisco J. Pino University of Cauca, Colombia 12:30 Lunch Break 14:00 Level 4 Implementation Experiences and Lessons Learnt Chen Tat Sze, Continental Automotive Singapore Pte Ltd, Singapore Comeback for more SPICE Jerzy Kowalczuk, Delphi Electronics & Safety, USA C1 From SPICE to Organizational Maturity - A Continuous Development Process Lothar Hermann Brose, C2 Cost Benefit Analysis of the Quality Measurement System of EB tresos Susanne Hartkopf EB Automotive, C3 Profitable engineering in tough times - SPICE increases efficiency Thomas Wunderlich Vector Consulting Services,

12 Program Program Tuesday, June 23, Day 2 Session 1 Industrialisation Session 2 Specialisation Session 3 Globalisation 1:00 A4 The Future of SPICE SPICE User Group B4 Product Quality for SPICE Assessors Joachim von Linde SynSpace, Switzerland 1:40 Coffee Break 16:1 Paneldiscussion - Future of SPICE and its Community Support 17:1 Future of Embedded Software Development Prof. Dave Thomas, Bedarra Research Labs, Canada 18:00 Break 18:30 Social Event (ends approx. 23:00) Wednesday, June 24, Day 3 9:00 Keynote The Implications of Functional Safety for Product and Process Dipl. Ing. Christoph Jung, BMW AG, 9:4 Moderated discussion after keynote C4 Automotive SPICE supports putting passenger cars into operation Christian Knüvener MB-technology, 10:00 Coffee Break Session 4 Industrialisation Session Specialisation Session 6 Process meets Product 10:30 A HIS Overview Jörg Zimmer, Jürgen Etzkorn, Albert Kreitmeyr, Dr. Thomas Kutritz HIS WG Assessment, B Integrated test strategies: Requirements from BMW assessor s point of view Bernhard Bielmeier BMW, C Optimization if Assessments for Automotive SPICE and Functional Safety Erwin Petry KUGLER MAAG CIE, Wednesday, June 24, Day 3 11:10 A6 BMW experiences with process assessments, process definitions and process benefits Jürgen Etzkorn BMW AG, 11:0 A7 Automotive SPICE - experiences from practice Frank Cornelius Daimler AG, B6 Problems with implementing the problem resolution management process (SUP.9) using Automotive SPICE Thomas Kömmerling MB-technology, B7 A process reference model applied in maritime and energy industry Hartmut Gierszal DNV IT Global Services, C6 Challenges in implementing ISO and Automotive SPICE in parallel Stefan Kriso Bosch, C7 A reference model for SPICE in Healthcare Matthias Hölzer-Klüpfel Method Park, 12:30 Lunch Break Session 4 Industrialisation Session Specialisation Session 6 Embedded Eclipse 14:00 A8 Joint Assessment - win/win for OEM and Supplier Albert Kreitmeyr Audi, 14:30 A9 Assessment of a modelbased development Dietmar Kant Volkswagen, 1:00 Keynote Evolving Critical Systems Prof. Mike Hinchey, Lero, Ireland 1:4 Closing - Transfer industry Experience B8 Process Improvement Through Frequent Retrospectives Andreas Schliep B9 SInnovation Process Design: A Change Management and Innovation Dimension Perspective Jürgen Schmied, Veronika Reger University of Applied Sciences München, Anywhere.24, C8 Open-DO and OSEE: agile methods for producing high-integrity software Nicolas Setton AdaCore, France C9 Open Collaboration in Engineering Processes: How are Sales and Purchasing affected? Janet Campbell Eclipse Foundation, USA

13 Exhibition Map Exhibitors Lecture Room Lecture Room ACTANO GmbH At the booth: Ralf-Peter Frick (registered SPICE Principal Assessor) DNV IT Global Services GmbH At the booth: Florian M. Muth (photo), Business Unit Manager Mike Pauli, Business Unit Manager Entrance/Registration/Wardrobe 1 isqi GmbH 2 intacs e.v. 3 I.S.C.N. Ltd / Memolux 4 Dpunkt/Projekt Magazin DNV IT Global Service GmbH 6 ACTANO GmbH Buffet 7 8 Bistro Tables 9 10 Buffet Kugler Maag CIE GmbH 8 netccm GmbH 9 Collossus Consulting 10 SQS AG 11 Method Park Software AG 12 SynSpace GmbH Rest Rooms ground floor 0. Auditorium 0.6 Rest Rooms first floor 0.8 Lecture Room 13 VDA-QMC 14 Wirtschaftsförderung 1 Region Stuttgart 16 Vector Consulting Services GmbH 1. Our product innovations / fair highlights are: Listen to the break-out session (10 min.): Automotive SPICE compliant supplier monitoring in the automotive branch a practical report at our booth (daily am and pm) and take part in our sweepstake for a half-day workshop risk management tailored to your individual requirements. 2. My company does: ACTANO is a provider of full solutions for the sustainable optimization of the product development process. We provide support to implement, optimize and certify quality standards such as SPICE, Automotive SPICE, CMMI, Six Sigma, ISO900x, QS9000, QFD, IEC 62061, IEC 6108, AEC-Q, JEDEC, and more. 3. Who am I? What do I do? Our expert Ralf-Peter Frick (registered SPICE Principal Assessor) will share his holisitic and long-lasting experience within process and project management with our visitors at the booth. 4. Three reasons to visit our booth: A) Profit from our expertise in: risk management supplier management project & process management B) Win a half-day workshop about risk management C) Listen to the breakout session and discuss with our experts 1. Our product innovations / fair highlights are: Integrated Quality and Process Management multi model approach, DNV OnBoard, Safety Management Center SMC, Instant Maturity 2. My company does: DNV IT Global Services Enhancing Trust and Confidence in IT DNV IT Global Services (DNV ITGS) helps organisations improving the efficiency of their IT-related processes and systems, assuring the safety and integrity of business critical operations, and maximising returns on IT investment in support of business goals. Being part of the autonomous DNV foundation with over 8000 employees in 100 countries, we offer you independence and sustainability. 3. Who am I? What do I do? What am I looking forward to? Florian M. Muth, Business Unit Manager Mike Pauli, Business Unit Manager We are looking forward to meet you as an expert in the field of quality and safety. 4. Three reasons to visit our booth: DNV s experience: 1. integrating quality approaches like ISO TS 16949, Automotive SPICE, CMMI DEV, CMMI ACQ, Six- Sigma, Lean, Total Quality 2. Safety Management projects based on IEC 6108 and ISO CD peforming process improvement with OEMs and global tier-1 suppliers, but also with small suppliers

14 Exhibitors Exhibitors I.S.C.N. Ltd At the booth: Dr. Richard Messnarz, Executive Director Memolux At the booth: Dr. Janos Ivanoys, Director Collossus Consulting At the booth: Fred Kaminski, managing director netccm GmbH At the booth: Alexander Auerbach, Co-founder and managing director 1. Our product innovations / fair highlights are: New assessment portal including learning organisation functionality. Beside team assessment functions the new release of Capability Adviser supports online multimedia lectures and tutoring. New assessment models: Integrated Automotive / Safety SPICE COSO/COBIT based Finance SPICE 2. My / our company is / does: ISCN (Dr Richard Messnarz, Automotive SPICE assessments and training (partner of VDA-QMC) Assessment portals Consulting Memolux (Dr Janos Ivanyos, COSO/COBIT based ISO 104 Finance SPICE 3. Who am I? Dr Richard Messnarz: Principal ISO 104 Automotive SPICE assessor General chair EuroSPI2 ( Vice president of ECQA ( Editor/author of books (publishers: Springer, Wiley, IEEE, D-Punkt in SPI) Dr Janos Ivanoys: Director of Memolux intacs work group leader for COSO/COBIT based Finance SPICE Coordinator of EU projects concerning Finance SPICE 4. Three reasons to visit our booth: involvement in task forces exchanging practical SPICE implementation know-how ( new methods winning a bottle of high quality whiskey 1. Our product innovations / fair highlights are: Collossus Consulting is progressively focussing on software quality aspects in the automotive field. 2. My company does: The company is highly engaged in software quality assurance on the project level, which includes the implementation, the improvement and the definition of development processes according to Automotive SPICE. Apart from this Collossus Consulting employees are very experienced in accompanying and leading customer assessments. 3. Who am I? What do I do? Fred Kaminski What do I do: Focussing on implmentation and improvement of automotive software quality What am I looking forward to:...find some new project which could profit from my experience in practice! 4. Three reasons to visit our booth: a) Have a nice contact to a well growing company b) Find out the difference between us and other process consultant c) Benefit from discussions with us about the future of quality assurance in the automotive field 1. Our product innovations / fair highlights are: netccm shows for the first time its new netccm Studio Professional 2.1. This solution allows tracing requirements in arbitrary software development processes without overhead. Information is automatically gathered from developers and used for automation and documentation. This simplifies achieving SPICE levels in the ENG process group. 2. My company does: netccm is a spin-off of the Humboldt-Universität zu Berlin. Our focus is developing tools for componentbased modelling. This method allows ensuring consistency and predictability in professional software development processes with the support of our tools. 3. Who am I? What do I do? I am co-founder and managing director with a focus on research and development. I am looking forward to present and discuss our approach. I also hope to provide solutions for common issues in development processes of SPICE Days visitors. 4. Three reasons to visit our booth: We present our solutions in detail and can directly answer all technical questions. Additionally we prepared a special offer for interested decision makers

15 Exhibitors Exhibitors Method Park Software AG At the booth: Ronald Zehmeister, Account Manager Vector Consulting Services At the booth: Thomas Wunderlich, Senior Consultant (photo) Dr. Rolf Ebert, Senior Consultant KUGLER MAAG CIE At the booth: Hans-Jürgen Kugler, Principal and Chief Scientist Bertram Janositz, Manager Sales (photo) International Software Quality Institute (isqi GmbH) At the booth: Malte Ullmann, Department Head of Certifications 1. Our product innovations / fair highlights are: Integrated Process and Product Lifecycle Management with Stages. Stages enables PLM systems and project management systems to incorporate tailor-made processes. 2. My company does: Method Park develops software in the field of safetycritical systems in medical engineering applications, for the automation and automotive industry. We are your proven partner for consulting, coaching, training, engineering services and products when it comes to software development processes. The software product, Stages offers you support in achieving the practical implementation of your development processes. With Stages the fulfillment of given quality standards and process models is assured. Stages facilitates distributed, global collaboration beyond company boundaries. 3. Who am I? What do I do? What am I looking forward to? I am Ronald Zehmeister / Account Manager Method Park Software AG. I am looking forward to meet interesting people in the SPICE 4. Three reasons to visit our booth: Be more efficient without sacrificing quality. Provide processes for people. See how processes drive your Project Management and Product Lifecycle Management. 1. Our product innovations / fair highlights are: Our competences include ISO 104-SPICE, Automotive- SPICE, CMMI, Six Sigma, Functional safety (IEC 6108, ISO 26262, etc.), security and efficiency improvement. Our innovative Vector Efficiency Check is readily available to highlight your own specific improvement potentials. 2. Our company does: Vector Consulting Services is the preferred supplier for improving technical product development. We support our customers with powerful consulting solutions that cover the entire product life-cycle and its related processes and tools. Objective-driven consulting together with a pragmatic implementation have made us the esteemed partner of our clients in a variety of industry segments. 3. Who are we? What are we looking forward to? As senior consultants with broad industry experience we are happy to address your challenges. 4. Three reasons to visit our booth: Objective-driven solutions tailored to your specific needs such as SPICE for Systems, Software and Hardware, CMMI for Development an Acquisition and fast-pace efficiency improvement. Professional consulting, innovative approaches and excellent quality. Consultants with broad industrial exposure and experiences. 1. Our product innovations / fair highlights are: We are your first port of call for System, Software, and Service performance improvement - worldwide. 2. Our company does: Setting the standard in process improvement - for the measurable benefit of your company, its customers, and the industry. We are Co-founder of intacs, Member of VDA-QMC AK13, Partner of SEI, Sponsor of SEI- Europe. 3. Who are we? What are we looking forward to? Bertram Janositz, Manager Sales, keen to listen to your problems and guide you to an adequate solution. Prof. Hans-Jürgen Kugler, Principal and Co-Founder, eager to share with you on how to turn problems and risks into chances and successes. 4. Three reasons to visit our booth: Asking about how to implement lean, predictable,and sustainable improvements. Getting to talk to someone who can provide advice and real support. Learning about do s and don ts when taking the next steps back home. The International Software Quality Institute (isqi GmbH), develops internationally accepted certification standards for advanced vocational training in the area of software quality. In order to optimize and safeguard the skills and abilities of software professionals, isqi certifies IT personnel in more than 40 countries. The advantages of personnel certification are primarily the secure, comparable qualification of professionals across national boundaries and language barriers. The isqi certification program includes standards such as: ISTQB Certified Tester, Foundation Level ISTQB Certified Tester, Advanced Level isqi Certified Professional for Project Management isaqb Certified Professional for Software Architecture IREB Certified Professional for Requirements Engineering intacs certified ISO/IEC 104 Provisional Assessor intacs certified ISO/IEC 104 Competent Assessor TTCN-3 Certificate Certified Innovation Manager intccm Certified Professional for Configuration Management QAMP Quality Assurance Management Professional intcsm International Certified Professional for IT-Security Management ISSECO International Certified Professional for Secure Software Engineering T.I.S.P. TeleTrusT Information Security Professional V-Modell XT

16 Exhibitors Exhibitors SynSpace GmbH At the booth: Michael Christian Landwehr, Senior Account Manager VDA QMC At the booth: Dr. Jan Morenzin, Projektleitung Automotive SPICE, Chi-Man Tran Agosense GmbH Axivion GmbH SynSpace is an international consulting company specialised in the improvement of processes for the development of software, hardware and systems. Today, SynSpace is familiar with the highest development standards in the sectors Automotive, Financial Services and Medical. Within these sectors, SynSpace belongs to the leading companies in Europe. In collaboration with our customers, SynSpace accomplishes an increase of the capability of the organisation taking into consideration constraints of cost, milestones, risks and specific safety requirements. Our guarantee of success is founded in 17 years of experience in successful method development and optimisation projects with the quality models ISO IEC 104 (SPiCE), ISO IEC 6108 (Safety) and CMMI. The Quality Management Center (QMC) has existed for the benefit of German automotive OEM s and their suppliers since August Under the leadership of Mr Heinz-Günter Plegniere, the QMC operates within the section of the German Automotive Industry Association (VDA) run by Dr Thomas Schlick. The roles and responsibilities undertaken by the QMC are varied and the questions surrounding quality management in the automotive industry occupy us on daily basis. The spectrum ranges from developing systems and methods to shaping the future of quality management systems in the automotive industry. These developments, as well as the direction of QMC, are steered by the top-level committee regarding quality matters in the German automotive industry: the QM Commission, chaired by Dr Weissbrich from Volkswagen AG. The QM Commission is formed by VDA members and consists of the Quality Management Directors of all the automotive OEM s, an equal number of suppliers, and the VDA, represented by one of its Executive Directors. agosense is an independent software vendor offering a service oriented platform for development process integration. This enables process-controlled exchange of company- and/or development data between different disciplines and applications also beyond company boundaries - within the product lifecycle management space.typical customers are companies developing and distributing software-based products or products with a high degree of embedded software and that are driven by collaboration and networking with different business partners i.e. customers, suppliers, development partners, etc. Usually these companies operate their development activities in an heterogeneous application landscape and try to optimize their development processes. The solution contains amongst others: A scalable integration platform based on modern and industry proven technology An open architecture using industry standards for optimal investment protection Highest flexibility and fast adoption for modeling process based integrations Robust Functionality for agile realization of integration requirements A high degree of data security and optimized performance. Axivion develops and markets a solution that enables software development teams to sustain the maintainability and changeability of their software applications. The main cause for problems during the evolution and maintenance of software is software erosion. Software erosion is the constant decay of the internal structure of a software system which occurs in all phases of software development and maintenance. The holistic solution of Axivion stops software erosion. Region Economic Development Corporation (WRS) At the booth: Dr. Reha Tözün,CARS-IT Initiative, Projektmanager / Project Manager The Stuttgart Region Economic Development Corporation (WRS) is the central contact for investors and companies in the City of Stuttgart and the five neighbouring counties. WRS aims to raise awareness on locational qualities of Stuttgart and supports sectoral networks in the region with numerous projects and offerings

17 Exhibitors Exhibitors Research Institute of Automotive Engineering and Vehicle Engines Stuttgart (FKFS) Institute of Software Technology at University of Stuttgart SQS AG INTACS e.v. The Research Institute of Automotive Engineering and Vehicle Engines Stuttgart (FKFS) is a public-law foundation and was founded in It is one of the best-known German research institutes and partner of the international automotive and supplier industry. Highly qualified and motivated staff provides research and development projects in the fields of propulsion, automotive engineering and automotive mechatronics. Numerous highly specialized test benches and facilities and self-developed measurement, testing and simulation procedures are used to solve complex and challenging research tasks. Long-time experience in the development and application of development tools are an additional component of our services. Total confidentiality while working on projects is, of course, guaranteed. An agreement of cooperation agreement between the FKFS and the Institut für Verbrennungsmotoren und Kraftfahrwesen IVK defines the general conditions of the cooperation with the University of Stuttgart. ISTE/ps conducts research in the field of data race detection by static analysis, and develops analysis tools to identify statements in the source code of a concurrent program (multi-threaded or interrupt-driven) that can cause data races at run time. Data races are situations in which one thread manipulates memory that is used by another thread in parallel. That other thread can thus see an inconsistent global state in memory and consequently serious errors can result. Static analysis is able to identify all positions in the source code where these errors might occur, and thus provides strong protection against them. The SQS Group, (SQS) is the largest independent provider of software testing and quality management services in the world. This position and its expertise stem from more than 27 years of successful consultancy operation. The company s main competitive advantage is its strong methodology, based on decades of project experience. Over this period of time, the company has also developed extensive specialist knowledge in many vertical markets. With more than,000 successfully completed projects under its belt, SQS has a strong customer base, including half of the DAX 30 companies, 30 percent of the STOXX-0 companies and 36 FTSE- 100-companies. Among the clients, there are names like Barclays, BP, Credit Suisse, Daimler, Deutsche Bank, Deutsche Post, Dresdner Bank, Eurobet, Eurogate, MessageLabs, Phoenics, T-Mobile, T-Systems, or Zurich Group. INTACS is a membership organization focussed on setting up qualification standards for SPICE based process assessors. This includes the qualification syllabus, Exam questionnaires and representation of process assessors on the ISO level as well as defining the processes, procedures and quality criteria for operating the scheme. INTACS is a not-for-profit organization. The executive board is led by its president Peter Bölter, Ludger Meyer (Siemens), Klaus Dehmel (Delphi), Gerd Grest (Draeger Medical) and Prof. Dehua Ju (ASTI China). The INTACS qualification scheme is fully compliant to ISO 104 (formerly known as SPICE). The accreditation and certification rules follow strictly the requirements of ISO These standards are widely used in many business sectors all over the world. Currently one of the main fields of intacs application is the automotive industry. The scheme is implemented by accredited professional training organizations and services are carried out in more than 20 countries all over the world. Training applicants can ask for independent certification by accredited certification bodies. We have established general partnerships with VDA-QMC (Association of Car Manufacturers, Quality Management Centre) and isqi (International Software Quality Institute). Development, maintenance and roll out of the qualification scheme is managed by the advisory board. Working Parties are organized to prepare the needed content. All work is provided on voluntary basis

18 Deadline achieved, Quality Improved. Customer Satisfied Stages web-based management solution for optimizing of product development processes :00:49 More efficient, standard-compliant processes Method Park Software AG Wetterkreuz 19 a 9108 Erlangen Higher product quality Tel Processes for People info@methodpark.com 3 of top automotive suppliers worldwide rely on our solution. Anz Spice Days.indd 1 More informaton:

19 Years

20 ISCN International Software Consulting Network i Since 1 years ISCN moderates European task forces and networks for process improvement and systems engineering. Since 1 years the knowledge of the task forces is collected, analysed and archived in teamworking and knowledge management portals which created a unique European knowledge base for the industry. Your company can also benefit from collaboration with ISCN and from the access to this vast pool of knowledge. By connecting experts, task forces and knowledge we have established a comprehensive service portfolio based on European and international standards. We can offer: Object Driven Improvement Automotive SPICE Competent Assessor Course 08/2008 You set the targets. We ensure you meet them. Vector Consulting Services is the preferred partner for improving technical product development. We support our customers with powerful consulting solutions that cover the entire product life-cycle and its related processes and tools. > Efficiency Improvement > CMMI and SPICE Get connected to task forces of leading companies and have access to a pool of certifications and courses > Functional Safety > Engineering Methodology > Project and Product Management intacstm- accredited trainings (we are an Automotive SPICE training partner of VDA-QMC) Assessement portals for ISO 104, Automotive SPICE, Safety SPICE and COSO-Finance SPICE Pool of competent and principal assessors and assessement teams coached by Dr Richard Messnarz (assessor since 1991) Consulting and development experiences in fields such as quality management, test management, system & software requirements analysis and functional design and re-use and platform concepts Coordinator of the EuroSPI2-Initiative (European System and Software Process Improvement and Innovation - Moderator of the SOQRATES-Initiative where 23 leading German companies share knowledge Moderator of the S2QI-Intiative where 10 leading Austrian companies are involved Coordinator and technology director of the European Certificates Association ( Accredited trainings: > Organizational Change Management Objective-driven consulting together with a pragmatic implementation have made us the esteemed partner of our clients. Certified Innovation Manager Certified EU Project Manager Certified Internal Financial Control Assessor (COSO SPICE) Certified IT-Security Manager Certified SPI-Manager (starting September 2009) etc. Interes ted? Conta ct us cons ulting@ More information: iscn.co I.S.C.N. Ges.m.b.H. Schieszstattgasse 4/24, A-8010 Graz, Austria Vector Consulting Services Your Partner for Achieving Engineering Excellence PCO_Company_Profile_Spice_Days_2009_180x180mm.indd 1 EuroSPI Conference 09/2008 Assessment and Consulting: Dr. Richard Messnarz Capability Adviser: Dipl.-Ing. Damjan Ekert :0:49 m I.S.C.N. LTD Bray, Ireland rmess@iscn.com dekert@iscn.com aclarke@iscn.ie EuroSPI2: Adrienne Clarke, BA German-speaking courses: Sonja Koinig, BA skoinig@iscn.at