6th Vector CONGRESS. November 28 and 29, 2012 Stuttgart
|
|
|
- Claud Turner
- 8 years ago
- Views:
Transcription
1 6th Vector CONGRESS November 28 and 29, 2012 Stuttgart
2 WEDNESDAY, November 28, 2012 Alte Reithalle 09:45-10:00 Welcome Management Vector Informatik 10:00-10:30 Keynote Intelligent electronics the key to CO 2 reduction Manfred Bek ZF Friedrichshafen AG 10:30-11:00 Keynote Calibration from yesterday to tomorrow Wolfgang Löwl Robert Bosch 11:00-11:30 ECU calibration Automated data evaluation Erhan Tepe Daimler AG 11:30-12:00 Rapid control prototyping at BMW functional development of vehicle dynamics E. Comulada Simpson BMW Group 13:30-14:00 Diagnostics Diagnostic processes at Ford Peter Geffers Ford-Werke 14:00-14:30 Automated diagnostic validation everything is there 14:30-15:00 Architecture & Design 15:00-15:30 Coffee break 15:30-16:00 Architecture & Design The use of PREEvision at the E/E development process of Porsche Model-based architecture development at Daimler Simon Müller Prof. Bortolazzi Dr. Zöller Markus Hemprich Vector Informatik Porsche AG Daimler AG 16:00-16:30 Product line engineering a key for reuse Jörg Mancke Continental Automotive 16:30-17:00 Strategy for the use of PREEvision to Support Functional Architecture within JLR 17:00-17:30 Safety Panel discussion: Dr. Rolf Zöller/Porsche, Simon Fürst/BMW, Dr. Dieter Lederer/Vector Karl Barker Moderator: Paul Hansen Jaguar Landrover Ltd. 19:00 Evening event at the MASH bar-restaurant (Bosch site, approx. 100 meters from the Hotel MARITIM)
3 WEDNESDAY, November 28, 2012 MARITIM Hall 11:00-11:30 Heavy-duty vehicles symposium 25 years of data network in Mercedes-Benz trucks upshot and prospects Wolfgang Appel Daimler AG 11:30-12:00 AUTOSAR goes off-road at Caterpillar Shawn Weck Caterpillar, Inc. 13:30-14:00 Heavy-duty vehicles symposium J1939: Opening up AUTOSAR to the heavy vehicle industry 14:00-14:30 Automatic test framework for the E/E system using hardware-in-the-loop (HIL) 14:30-15:00 ECU testing and process support with the Stoneridge standardized test framework 15:00-15:30 Coffee break 15:30-16:00 Heavy-duty vehicles symposium Paths towards the electrification of agricultural machines and to agricultural e-mobilit 16:00-16:30 Optimizing the testing of ISOBUS task controllers with simulation 16:30 Event continues in the Alte Reithalle Robert Niemczyk Peter Thorngren Alexander Gordon Peter Pickel Peter Fellmeth Volvo Group Trucks Technology Volvo Group Trcks Technology Stoneridge Electronics AB John Deere & Co. KG Vector Informatik
4 THURSDAY, November 29, 2012 Alte Reithalle 09:00-09:30 Keynote Challenges arising from the complexity of global EE architectures Philipp Peti Adam Opel AG 09:30-10:00 Keynote AUTOSAR in production use at Mercedes Frank Cornelius Daimler AG 10:00-10:30 Coffee break 10:30-11:00 ECU testing Model-based testing in parking and maneuvering systems 11:00-11:30 Through the testing process with high efficiency the Vector testing solution 11:30-12:00 Integration and testing of virtual AUTOSAR ECUs 13:30-14:00 ECU testing Virtual integration for early validation of AUTOSAR applications Stefan Kempe Siegfried Beeh Mark Schwager Dr. Thomas Ringler Robert Bosch Daimler AG 14:00-14:30 Approach for charging communication conformance testing in electric vehicles 14:30-15:00 Coffee break 15:00-15:30 New bus systems Introduction to Ethernet 15:30-16:00 Automotive IP/Ethernet: Next steps of predevelopment Frank Brosi Peter Schönenberg Jürgen Röder 16:00-16:30 CAN FD Thomas Lindenkreuz 16:30 Official end of the 6th Vector Congress FKFS Universität Stuttgart BMW Group Continental Automotive Robert Bosch
5 THURSDAY, November 29, 2012 MARITIM Hall 10:00-10:30 Coffee break 10:30-11:00 AUTOSAR & Safety Use of AUTOSAR in the ECUs of various OEMs a platform approach 11:00-11:30 Practical experience in the realisation of ISO :30-12:00 Functional safety From risk analysis to the AUTOSAR-compatible software architecture 13:30-14:00 AUTOSAR & Safety Basic software meets ISO the next step Gerald Müller Dr. Christof Ebert Dr. Günther Heling Stefan Esch Peiker Vector Consulting Services Audi AG 14:00-14:30 The next generation of AUTOSAR basic software Jochen Rein 14:30-15:00 Coffee break (event continues in the Alte Reithalle afterwards)
6 INFORMATIONEN Dates: November 28 and 29, 2012 Location: Hotel MARITIM Main event: Alte Reithalle (ground floor) Parallel presentations: MARITIM Hall Seidenstraße 34, D Stuttgart Parking: Fee parking is available at the Hotel MARITIM and in the neighboring Liederhalle parking structure. Conference language: German and English, with simultaneous translation Lodging: Rooms are available at the Hotel MARITIM at a special event rate of 155 EUR/night (Discount code: Vector, Tel ). You will find other hotel recommendations at: Participation fee: No fee is charged. Advance registration is required. We can provide you with a receipt upon request. Your contact person at Vector: Falko Thieß Phone: Fax: event@vector.com Registration deadline: November 15, 2012 Registration form and information:
Automatic Validation of Diagnostic Services
Development ProcessES Diagnostics Automatic Validation of Diagnostic Services For the first time, a fully automated test case generator has been introduced in diagnostics validation at General Motors Europe
Model Based E/E Architecture Development at Daimler
Model Based E/E Architecture Development at Daimler...and a Look at the Broader Picture Markus Hemprich Gabriel Schwefer E/E Architecture & Standardisation (RD/EEP) Vector Congress Stuttgart, 28.11.2012
DEDICATED TO SOLUTIONS
DEDICATED TO SOLUTIONS TRAINING & LEARNING SOLUTIONS "Our individual and customer specific training solutions guarantee optimal learning results". For 30 years we have supported our customers in the training
Presented by: Jens Svensson, Volvo 3P. Volvo Group
Presented by: Jens Svensson, Volvo 3P Welcome to is one of the world's leading suppliers of transport solutions for commercial use. We also provide complete solutions for financing and service. Volvo Trucks
Herstellerinitiative Software (OEM Initiative Software)
Herstellerinitiative Software (OEM Initiative Software) Dr. Michael Daginnus Volkswagen AG Wolfsburg Dr. Dieter Marx Porsche AG Weissach Dr. Ralf Belschner Daimler AG Sindelfingen Kai Barbehön BMW AG München
Better Test Quality by Automation
Technical Article Better Test Quality by Automation Automated HIL test system ensures ISOBUS functionality of agricultural machines The ISOBUS communication protocol has now essentially made it possible
SOFTWARE DEVELOPMENT. Innovative. in Automotive
Innovative SOFTWARE DEVELOPMENT SOFTWARE FOR PILOTED DRIVING AGILE IN AUTOMOTIVE CONTINUOUS VERIFICATION OPEN SOURCE PLATFORMS ADAS INTEGRATION PLATFORM in Automotive ADVISORY BOARD Prof. Dr Dr h.c. Manfred
Configuration management in AUTOSAR
Configuration management in AUTOSAR The need for efficient process tools for Automotive System Engineering V0.01 2008-11-02 Introduction AUTOSAR will influence the ECU SW Architecture and also the way
User-friendly Configuration of AUTOSAR ECUs with Specialized Software Tools
User-friendly Configuration of AUTOSAR ECUs with Specialized Software Tools The simple CAN ECU is a thing of the past. Now, a typical ECU utilizes many functions of the AUTOSAR basic software to perform
19 AND 20 JUNE 2007 STUTTGART
11TH AUTOMOTIVE TECHNOLOGY CONFERENCE 19 AND 20 JUNE 2007 STUTTGART Virtual Vehicle Creation 2007 International Congress _ Design _ Chassis _ Safety: Crash and Driver Assistance Systems _ Electrics/Electronics
Heavy-Duty Diesel Diagnostics
3 rd International Conference Heavy-Duty Diesel Diagnostics The only dedicated industry meeting of Diagnostics for Trucks, Buses and NRMM 9 October 2014 in Nuremberg, Germany Pre-event 8 October 2014:
Safety compliance. Energy management. System architecture advisory services. Diagnostics. Network topologies. Physical and functional partitioning
Energy management Network topologies Physical and functional partitioning Safety compliance Diagnostics System architecture advisory services www.continental-corporation.com Why system architecture? 2
Standardized software components will help in mastering the. software should be developed for FlexRay were presented at
Embedded Software for FlexRay Systems Special aspects and benefits of implementing modularized software Standardized software components will help in mastering the growing complexity of the interplay of
J1939: Opening Up AUTOSAR to the Heavy Vehicle Industry
6th Vector Congress Stuttgart 28-29 November, 2012 J1939: Opening Up AUTOSAR to the Heavy Vehicle Industry Bob Niemczyk, Volvo Group Brands 2 Vertical or Horizontal Organization? Volvo Europe: New FH Truck
Security in Vehicle Networks
Security in Vehicle Networks Armin Happel, Christof Ebert Stuttgart, 17. March 2015 V1.1 2015-04-28 Introduction Vector Consulting Services supports clients worldwide in improving their product development
Development of AUTOSAR Software Components within Model-Based Design
2008-01-0383 Development of AUTOSAR Software Components within Model-Based Design Copyright 2008 The MathWorks, Inc. Guido Sandmann Automotive Marketing Manager, EMEA The MathWorks Richard Thompson Senior
09:40 The electric car market and the automotive industry strategies
PROGRAM Day 1 Tuesday April 8 08:25 Registration and morning coffee with exhibition visit 08:55 Moderator Fredrik Sidahl, CEO, FKG opening presentation 09:00 KEYNOTE Embedded software development at BMW
congress-program Information & Registration: www.automobil-produktion.de/alp
congress-program CONGRESS AUTOMOTIVE LEAN PRODUCTION NOVEMBER 22 nd /23 rd 2011, BMW WELT MUNICH Automotive Lean Production Awards ceremony Key Note Speakers: Dr. Herbert Diess, Member of the Board of
idas Data Application and Documentation
idas Data Application and Documentation intelligent Data Application System Rainer Röhrle ZF Friedrichshafen AG TEN_1001_2_en Application Process (commercial vehicles) Offline calibration (pre calibration)
UR:BAN Networked Transportation System. Good Practice Case of Industry-led R&D Project with Good Prospects of Post-project Exploitation
UR:BAN Networked Transportation System Good Practice Case of Industry-led R&D Project with Good Prospects of Post-project Exploitation Programme Mobility and Transportation Technologies "Mobility and Transport
Interaction of Mechanical Engineering, Electronics and Software the Way Towards Full Vehicle. Program
3. GRAZER SYMPOSIUM Interaction of Mechanical Engineering, Electronics and Software the Way Towards Full Vehicle Program The Topics: Electronics as a driver for integrated development Interaction of simulation
smart grids forum Intelligent power grids: How to build in Safety and Security Conference March 21 22, 2013 in Munich, Germany
smart grids forum Intelligent power grids: How to build in Safety and Security Conference March 21 22, 2013 in Munich, Germany TÜV SÜD AG Embedded Systems TÜV SÜD Akademie GmbH About the Conference To
13 th Powertrain Manufacturing Conference
Program 13 th Powertrain Manufacturing Conference Powertrain Production 2020 Global Networks New Processes Resource Efficiency November 17 18, 2015 darmstadtium Darmstadt Germany TU DARMSTADT Fotos: www.starragheckert.com
Virtual Integration and Consistent Testing of Advanced Driver Assistance Functions
Stuttgart, Testing Expo 2012 Virtual Integration and Consistent Testing of Advanced Driver Assistance Functions 2012-06-12 Jürgen Schüling Agenda Introduction and Motivation State of the Art Hardware in
3 rd GERMAN-AFRICAN INFRASTRUCTURE FORUM NOVEMBER 3 rd 4 th, 2015
3 rd GERMAN-AFRICAN INFRASTRUCTURE FORUM NOVEMBER 3 rd 4 th, 2015 In cooperation with Program Hotel Vier Jahreszeiten Kempinski Maximilianstraße 17 80539 Munich, Germany www.gaif.de Organised by Afrika-Verein
Validating Diagnostics in Early Development Stages
Validating Diagnostics in Early Development Stages Explanations by means of an Example of an automatic exterior lighting control Dipl.-Ing. Valentin Adam, Daimler AG Dipl.-Ing. Matthias Kohlweyer, Daimler
New Technologies for Emerging Markets
ATZ CONFERENCE MANAGEMENT 2008 26 NOVEMBER 2008 FRANKFURT/M. GERMANY New Technologies for Emerging Markets Strategies for European Automotive Companies to Meet Customers' Needs _ Entering markets in new
MODEL-BASED DEVELOPMENT OF AUTOMOTIVE EMBEDDED SOFTWARE IN COMPLIANCE WITH ISO 26262: CHALLENGES & EFFECTIVE SOLUTIONS 8 JUNE - 9 JUNE 2015
MODEL-BASED DEVELOPMENT OF AUTOMOTIVE EMBEDDED SOFTWARE IN COMPLIANCE WITH ISO 26262: CHALLENGES & EFFECTIVE SOLUTIONS 8 JUNE - 9 JUNE 2015 Highlights Developing safety-critical software in compliance
An event organized by. Congress-program
Congress-program 7 th Congress automotive lean production November 6 th /7 th 2012 at BMW Leipzig Plant/ Congress Center Leipzig Automotive Lean Production Awards ceremony Key Note Speakers: Frank-Peter
THE NUMERICAL SIMULATION CONFERENCE
EXHIBITION & SPONSORSHIP PROGRAM THE NUMERICAL SIMULATION CONFERENCE ANSYS CONFERENCE & 33 rd CADFEM USERS MEETING 2015 CONVERGENCE EXHIBITION & SPONSORSHIP PROGRAM THE NUMERICAL SIMULATION CONFERENCE
The SAE J1939 Communications Network
The SAE J939 Communications Network An overview of the J939 family of standards and how they are used An SAE White Paper Since its publication more than a decade ago, SAE J939 has become widely accepted
Convenient Charging of Electric Vehicles
Technical Article Convenient Charging of Electric Vehicles Smart Charging with MICROSAR IP enables flexible charging processes and easy payment Compared to conventionally powered vehicles, electric vehicles
Introduction of ZF-Hungary Ltd. T-Eger ZF Hungária Kft.
Introduction of ZF-Hungary Ltd. T-Eger ZF Hungária Kft. 1 2014 T-Eger, ZF Hungária Kft. Company History, ZF Group Milestones 1915 Foundation of Zahnradfabrik GmbH in Friedrichshafen by the Luftschiffbau
Model-based Development of Hybrid-specific ECU Software for a Hybrid Vehicle with Compressed-Natural-Gas Engine
Model-based Development of Hybrid-specific ECU Software for a Hybrid Vehicle with Compressed-Natural-Gas Engine Dipl.-Ing. Tobias Mauk IVK, Universität Stuttgart Pfaffenwaldring 12, 70569 Stuttgart Telephone:
Safe-E. Safe-E Introduction. Coordination: Andreas ECKEL TTTech Computertechnik AG andreas.eckel@tttech.com
Introduction Coordination: Andreas ECKEL TTTech Computertechnik AG andreas.eckel@tttech.com The Eurostars Project within the ITEA-2 Safe Project Eurostars : what is it and why?: Eurostars is an Eureka
8 th EFAConference: We Create the Smart Factory The European Business Conference for Assembly and Handling Technology October 30-31, 2015 Frankfurt,
8 th EFAConference: We Create the Smart Factory The European Business Conference for Assembly and Handling Technology October 30-31, 2015 Frankfurt, Germany Why should you attend? The EFAConference which
Simple and error-free startup of the communication cluster. as well as high system stability over long service life are
Network Management for FlexRay New network topologies tested in practice Simple and error-free startup of the communication cluster as well as high system stability over long service life are required
Beschleunigen Sie die Entwicklung Ihrer Embedded Software mit Dienstleistungen von Vector
Beschleunigen Sie die Entwicklung Ihrer Embedded Software mit Dienstleistungen von Vector Vector Embedded Software 2013 V1.3.0 2013-04-04 Your Presenters Today Michael Buck Manager Product Services / Technical
Service Oriented Architecture for Agricultural Vehicles
Service Oriented Architecture for Agricultural Vehicles Leipzig, 30.9.2010 8. Workshop Automotive Software Engineering Dr. G. Kormann, M. Hoeh, H.J. Nissen THE END of Embedded Software? www.electronics-ktn.com/
Efficient and Faster PLC Software Development Process for Automotive industry. Demetrio Cortese IVECO Embedded Software Design
Efficient and Faster PLC Software Development Process for Automotive industry Demetrio Cortese IVECO Embedded Software Design 13-06-2013 Automotive OEM Mandatory Requirement Delivery the new vehicle in
Advanced Electronic Platform Technologies Supporting Development of Complicated Vehicle Control Software
133 Hitachi Review Vol. 63 (2014), No. 2 Advanced Electronic Platform Technologies Supporting Development of Complicated Vehicle Control Software Yoshinobu Fukano, Dr. Sci. Kosei Goto Masahiro Matsubara
Sponsoring & Exhibitors. VIRTUELLES FAHRZEUG May 18-20, 2015 - Graz, Austria. Interdisciplinary Development of the Vehicle 2020+ Information for
Interdisciplinary Development of the Vehicle 2020+ Processes, Methods, Tools for Automated, Energy Efficient and Cooperative Vehicles Information for Sponsoring & Exhibitors www.gsvf.at CONTACT: Julia
Multi-domain Model-driven Development Developing Electrical Propulsion System at Volvo Cars
Multi-domain Model-driven Development Developing Electrical Propulsion System at Volvo Cars Jonn Lantz Technical Specialist, Electric Propulsion Systems @ Volvo Car Group Jonn.Lantz@volvocars.com 1 Partners
ISO11783 a Standardized Tractor Implement Interface
ISO a ized Tractor Implement Interface Peter Fellmeth, Vector Informatik GmbH The upcoming ISO standard will be the preferred tractor Implement interface in the agricultural industry. Therefore the ISO
In networking ECUs in heavy-duty vehicles, it is the J1939 protocol that. plays a key role. J1939 networks are based on the CAN bus (high-speed
Networking Heavy-Duty Vehicles Based on SAE J1939 From Parameter Group to plug-and-play Application In networking ECUs in heavy-duty vehicles, it is the J1939 protocol that plays a key role. J1939 networks
Consulting. Planning. Managing.
Consulting. Planning. Managing. Your wishes meet our solutions Consulting Corporate success attaining goals through competence Dürr is a world leader in the construction and supply of plant and machinery.
CO 2. emissions performance of car manufacturers in 2010
emissions performance of car manufacturers in 2010 Executive summary Executive summary Data collected by the European Environment Agency (EEA) on emissions from passenger cars reveal that the majority
AURIX Preferred Design House. Hitex Development Tools GmbH Hitex (UK) Ltd.
AURIX Preferred Design House Hitex Development Tools GmbH Hitex (UK) Ltd. Company Profile Founded in 1976 38 years of experience in microcontroller technology Part of the Infineon Group since 2003 Leading
Dr.-Ing. Rainer Rasche dspace GmbH Rathenaustrasse 26 33102 Paderborn automotive testing expo June 22, 2010
Combining Two Worlds: Precise Real-Time- Based and Convenient PC-Based Testing Dr.-Ing. Rainer Rasche dspace GmbH Rathenaustrasse 26 33102 Paderborn nd automotive testing expo June 22, 2010 Agenda Testautomation
COURSE PROGRAM. Isolato 47 - Politecnico di Bari. in Bari, Italy. September 21-24, 2015. Grande Albergo delle Nazioni.
COURSE PROGRAM Isolato 47 - Politecnico di Bari in Bari, Italy September 21-24, 2015 Grande Albergo delle Nazioni in Bari, Italy BARI AUTOMOTIVE SUMMER SCHOOL Centro Studi Componenti per Veicoli SpA (BOSCH
TÜ V Rheinland Industrie Service
TÜ V Rheinland Industrie Service Business Area: Automation / Functional Safety Contact Minsung Lee +82-2-860-9969 mailto : minsung.lee@kor.tuv.com Sales Account Manager for Functional Safety Fax +82-2-860-9862
3 rd National Conference
Call for Papers 3 rd National Conference with exhibition October 8 th and 9 th 2007 BG Academy Dresden with simultaneous translation from German into English 318733 www.vdi.de/hs2007 Preface At work and
BENEFITS FEATURES. Specifically designed for the Repair of Mack Trucks or Volvo Trucks with Mack or Volvo Engines. Simple, Easy to Use.
1 Specifically designed for the Repair of Mack Trucks or Volvo Trucks with Mack or Volvo Engines FEATURES BENEFITS Simple, Easy to Use. Displays vehicle temperatures, battery state of charge, gauges, switches
Automotive Software Development Challenges Virtualisation and Embedded Security
Automotive Software Development Challenges Virtualisation and Embedded Security 1 Public ETAS-PGA/PRM-E October 2014 ETAS GmbH 2014. All rights reserved, also regarding any disposal, exploitation, Automotive
ANSYS SCADE Model-Based Development Solutions for AUTOMOTIVE. Critical Systems & Software Development Solutions
ANSYS SCADE Model-Based Development Solutions for AUTOMOTIVE Critical Systems & Software Development Solutions Embedded Systems and Software Challenges in Automotive Production-Proven International and
DEDICATED TO SOLUTIONS. Automotive System and Software Development
DEDICATED TO SOLUTIONS Automotive System and Software Development ... PERFORMANCE ADVANTAGE BY KNOW-HOW AND INNOVATION ESG Partnership System Competence Progress For five decades, ESG has been one of the
9 th European Pressure Equipment Conference. Symposium, June 8 9, 2011, Fürstenfeldbruck (near Munich), Germany
International Conferences 9 th European Pressure Equipment Conference Symposium, June 8 9, 2011, Fürstenfeldbruck (near Munich), Germany TÜV SÜD Industrie Service GmbH TÜV SÜD Akademie GmbH The conference
UFI FILTERS INNOVATION IN THE SERVICE OF TECHNOLOGY
INNOVATION IN THE SERVICE OF TECHNOLOGY WORLDWIDE PRESENCE THE MANUFACTURERS CHOICE COMMERCIAL AND FRONT OFFICES PRODUCTION PLANTS SOME OF OUR ORIGINAL EQUIPMENTS AROUND THE WORLD FIAT CHRYSLER GROUP:
Multi-Agent Systems. Expert Forum Agents within the context of Industry 4.0. Industry 4.0 Machine Learning. Energy and Smart Grids.
Multi-Agent Systems Event Expert Forum Agents within the context of Industry 4.0 Industry 4.0 Machine Learning Material Handling Energy and Smart Grids Energy Management Production Control Operations Scheduling
Product Information Services for Embedded Software
Product Information Services for Embedded Software Table of Contents 1 Technical Consulting/Engineering Services... 3 1.1 Overview of Advantages... 3 1.2 Application Areas... 3 2 Product- Services - Proficient
Challenge of Ethernet Use in the Automobile
Challenge of Ethernet Use in the Automobile Flexible interfaces and software tools simplify ECU development Already this year, Ethernet will be used as a system network in the first production vehicles.
How To Develop A Car
Functional Safety, Automotive SPICE and Agile Methodology Automotive SPIN Italia 8 th Automotive Software Workshop 17. February 2011 Markus Müller KUGLER MAAG CIE GmbH Leibnizstr. 11, 70806 Kornwestheim
Corporate Finance in the Automotive Arena. - Navigating the next decade. of auto industry transformation -
Corporate Finance in the Automotive Arena - Navigating the next decade of auto industry transformation - Jens Diehlmann Partner at IBM Global Business Services; Global Leader Captive Finance Agenda 1 Who
automotive.elektrobit.com Driver assistance software EB Assist solutions
automotive.elektrobit.com Driver assistance software EB Assist solutions From driver assistance systems to automated driving Automated driving leads to more comfortable driving and makes the road safer
AUTOSAR Configuration Process - How to handle 1000s of parameters
AUTOSAR Configuration Process - How to handle 1000s of parameters Webinar 2013-04-19 V2.0 2013-04-18 Agenda >Introduction AUTOSAR ECU Configuration Description ECU Configuration Workflow Multi-User Workflow
Chip simulation of automotive ECUs
Chip simulation of automotive ECUs Jakob Mauss, QTronic GmbH Matthias Simons, Daimler AG 9. Symposium Steuerungssysteme für automobile Antriebe Berlin-Tempelhof, 20.-21.09.2012 Outline of the talk Chip
Car2x From Research to Product Development
Car2x From Research to Product Development How automotive OEMs and suppliers are successfully completing production Car2x projects Car2x systems present entirely new challenges for managers in product
Integration of Time Management in the Digital Factory
Integration of Time Management in the Digital Factory Ulf Eberhardt a,, Stefan Rulhoff b,1 and Dr. Josip Stjepandic c a Project Engineer, Daimler Trucks, Mannheim, Germany b Consultant, PROSTEP AG, Darmstadt
European Annual EduNet Conference 2010. 09 10 June 2010, Hogeschool West-Vlaanderen, Belgium
European Annual EduNet Conference 2010 09 10 June 2010,, Belgium Tuesday, 8 June 2010 Arrival in Kortrijk 7:00 pm Welcome and dinner at Parkhotel Kortrijk Stationsplein 2, 8500 Kortrijk, Belgium www.parkhotel.be
openmdm an Open Source Platform for Measured Data Management Dr. Dietmar Rapf, Michael Schwarzbach
openmdm an Open Source Platform for Measured Data Management Dr. Dietmar Rapf, Michael Schwarzbach openmdm an Open Source Platform for Measured Data Management Seite 2 IT and PLM consulting business since
Software Production. Industrialized integration and validation of TargetLink models for series production
PAGE 24 EB AUTOMOTIVE Industrialized integration and validation of TargetLink models for series production Continuous Software Production The complexity of software systems in vehicles is increasing at
Benchmarking Experiences and Guidelines for Improvement
Benchmarking Experiences and Guidelines for Improvement Christof Ebert, Vector Consulting Services V1.1 2016-04-19 Welcome Vector Consulting Services supports clients worldwide in improving their product
Best Practice Guideline Software Release
Best Practice Guideline Software Platform Automotive Electronics, Infrastructure & Software Impressum Best Practice Guideline Software Published by: ZVEI German Electrical and Electronic Manufacturers
Safe Automotive software architecture (SAFE)
Safe Automotive software architecture (SAFE) 01-03-2012, ARTEMIS Technology Conference 2012 Stefan Voget Continental Automotive Content Motivation Project Organization Work Packages Approach for Interoperability
Vehicular On-board Security: EVITA Project
C2C-CC Security Workshop 5 November 2009 VW, MobileLifeCampus Wolfsburg Hervé Seudié Corporate Sector Research and Advance Engineering Robert Bosch GmbH Outline 1. Project Scope and Objectives 2. Security
UNIVERSAL TECHNICAL INSTITUTE
2008 BMO Capital Markets 8th Annual Back to School Education Conference UNIVERSAL TECHNICAL INSTITUTE 1 September 10, 2008 Safe Harbor This presentation may include predictions, estimates or other information
Smart Testing of Smart Charging
Smart Testing of Smart Charging Consistent test case coverage for electric mobility With the increasing diversity of electric vehicles and charging station systems, interoperability between components
Program 16th International Conference Advances in Automotive Electronics
Program 16th International Conference Advances in Automotive Electronics Forum am Schlosspark, Ludwigsburg/Germany June 19 and 20, 2012 New challenges for E/E: electro-mobility the vehicle electric system
Anti-freeze / Coolants
s Features and benef its of Lescot s For petrol and diesel engines OEM SPECIFICATIONS RANGE ORGANIC ACID TECHNOLOGY Protection against freezing Protection against overheating Superior heat transfer efficiency
Wiederverwendung von Testfällen bei der modellbasierten SW-Entwicklung
Wiederverwendung von Testfällen bei der modellbasierten SW-Entwicklung DGLR Workshop "Verifikation in der modellbasierten Software-Entwicklung" Garching, 04 October 2011 Dipl.-Ing. Peter Hermle, Key Account
BRAZILIAN AUTOMOTIVE INDUSTRY AT A GLANCE
BRAZILIAN AUTOMOTIVE INDUSTRY AT A GLANCE BRAZILIAN AUTOMOTIVE INDUSTRY GENERAL MARKET INFORMATION Brazil has become the 7th largest vehicle producer and the 4th largest vehicle consumer market in the
KEN LEE GROUP MARKETING & COMMUNICATIONS DIRECTOR
KEN LEE GROUP MARKETING & COMMUNICATIONS DIRECTOR 20 years of automotive marketing experience Pioneered Inchcape Advantage INCHCAPE ADVANTAGE our competitive advantage What do customers look for? Vehicle
Renowned speakers will present their insights on the following topics:
2 nd INTERNATIONAL VDI CONFERENCE 2015 AUTOMOTIVE HMI & CONNECTIVITY Renowned speakers will present their insights on the following topics: HMI Design and Development User Requirements and UX First New
With LOGIKA you realize higher targets with greater security, speed and efficiency
If you want to build a ship, don t drum up the men to gather wood, divide the work and give orders. Instead, teach them to yearn for the vast and endless sea. Antoine de Saint-Exupéry 1900-1944 With LOGIKA
ASCET in ECU Development Tool Chains
ASCET in ECU Development Tool Chains 1 From Function to Software Development Rapid Prototyping Modeling & Simulation Meas. & Calibr. INCA-EIP Meas. & Calibr. INCA Realtime Operation ES910 Virtual, & Rapid
Statement of Steve Douglas Senior Director of Environmental Affairs,
Before the United States Copyright Office Public Hearings on Section 1201(a) Rulemaking Statement of Steve Douglas Senior Director of Environmental Affairs, Alliance of Automobile Manufacturers May 19,
One common language for domain experts and test engineers
One common language for domain experts and test engineers Cost-effective creation and reuse of test sequences with Vector s Test Automation Editor V0.01 2011-04-13 Agenda > Overview Introduction to the
8 th International VPM Days Hannover 2015
Program 2015 Thursday September 17 th, 2015 12.00 13.00 Registration and Snacks 13.00 13.30 Welcome & opening remarks Dr. Bernd Eisele (VPM) & Marina Lerch (hannoverimpuls) Key Note Lecture: 13.30 14.00
Automotive Software Engineering
Automotive Software Engineering List of Chapters: 1. Introduction and Overview 1.1 The Driver Vehicle Environment System 1.1.1 Design and Method of Operation of Vehicle Electronic 1.1.2 Electronic of the
From Signal Routing to complete AUTOSAR compliant CAN design with PREEvision (II)
From Signal Routing to complete AUTOSAR compliant CAN design with PREEvision (II) RELEASED V0.01 2014-12-02 Agenda PREEvision AUTOSAR Webinar Part I AUTOSAR System and Software Design with PREEvision The
GRPE Informal Working Group on Heavy Duty Hybrids
Informal document No. GRPE-66-23 (66th GRPE, 03-07 June 2013, agenda item 4(a)) GRPE Informal Working Group on Heavy Duty Hybrids Report to GRPE 66 Geneva, 06 June 2013 1 Contents Summary of 13th meeting
Automotive CAE Integration.
WHITEPAPER Automotive CAE Integration.. 2010 AUDI AG BMW AG Daimler AG Dr. Ing. h. c. F. Porsche AG Volkswagen AG PROSTEP AG Automotive CAE Integration Addendum to Automotive CAE Integration: Requirements
Do AUTOSAR and functional safety rule each other out?
Software development Do AUTOSAR and functional safety rule each other out? While simplicity is a factor in safety-critical applications, AUTOSAR has over 6,000 configuration parameters and well over 100,000
I SO wish it were that easy! The challenge of ISOBUS Implementation
Precision Farming Challenges in the 21 st Century I SO wish it were that easy! The challenge of ISOBUS Implementation Peter Nelson Engineering Director RDS Technology Ltd. What is ISOBUS? ISOBUS is a standard
REGISTER NOW! 15 th - 17 th July 2015 Kongresshotel Potsdam am Templiner See REGISTER NOW! Fifth VDA Automotive SYS Conference
REGISTER NOW! REGISTER NOW! Fifth VDA Automotive SYS Conference Quality, Safety and Security for Automotive Software-based Systems 15 th - 17 th July 2015 Kongresshotel Potsdam am Templiner See Head of
geff generation all of us efficiency doing things right, being effective
geff generation all of us efficiency doing things right, being effective We provide energy efficiency-focused consulting and project management services for building technologies, production processes,
Hardware-independent Software Development
Hardware-independent Software Development with Stefan Bunzel, Khosrau Heidary(Continental); Simon Fürst, Andre Lajtkep (BMW Group); JürgenMössinger, Jürgen Cordes(Bosch); StefanSchmerler, ChristianKühn,
Wireless M2M Communication and AMR Now in the second edition completely updated and revised
Wireless M2M Communication and AMR Now in the second edition completely updated and revised What are the latest developments in AMR on the European market? In 2004 came the real breakthrough for solutions
Timing Analysis for Verification of Network Architectures. Timing Analysis
for Verification of Network Architectures In order to evaluate EE architectures regarding their timing and resource requirements, the knowledge of the required attributes and properties plays an important
Cybersecurity And The Automotive Industry
Cybersecurity And The Automotive Industry Dr Andrew Brown, Jr PE, FESD, FSAE, NAE Vice President & Chief Technologist Delphi 2014 Global Symposium on Connected Vehicles & Infrastructure April 21-23, 2014