Content. Product list

Transcription

1 Product list This list of products includes all parts necessary for common application together with the corresponding measures. For parts indispensable to a special use of MevaDec, please refer to our MEVA price list. Content Beam clamp H Beam support...29 Cross bracing clamp...26 Forked prop head...25 Forming face 3S...20 Girder H Height extension...28 Height extension for mobile scaffold...33 MD prop...21 MD safety clamp...25 MEP frame...26 MEP prop with SAS...23 ME prop...22 Meva storage box 120/ MevaTrenn release agent...30 MevaTrenn release agent FT Mobile scaffold...33 Piling rack...32 Pin 14/ Pin 14/ Railing clamp Retaining rail...27 Sprayer...31 Stainless steel jet FT Swivel type castor Tensioning device...28 Trestle for beam 40/ Tripod...25 Wax...30 Wedge clamp H

2 MevaFlex Forming face 3S triple laminated forming face, 21 mm thick, with resistant melamine resin coating on both sides. Good pore structure of the concrete due to absorbent forming face surface. Ref.-No. size surface weight / m² 5.5 kg / m² 8.0 kg / m² 10.5 kg / m² 13.0 kg / m² 21.0 kg / m² 26.0 kg / m² 31.0 kg Girder H20 robust all purpose girder for the most different tasks. High load bearing capacity with low dead weight and approved by the building authorities. adm. Q = 11 kn adm. M = 5 knm cm 12.3 kg cm 12.5 kg cm 14.5 kg cm 16.5 kg cm 19.5 kg cm 22.5 kg cm 24.5 kg cm 29.5 kg 20

3 MD-prop plate inner tube MD300/20 according to the European Draft Standard (class D) the permissible load bearing capacity of the prop is always 20 kn at all extensions in connection with formwork systems / kg / kg tube Ø 4.8 plate outer tube adjustment range MD 300/20: m (MD 400/20: m) Hub 11,5 tube Ø 6.0 plate inner tube MD 400/20 tube Ø 6.2 plate outer tube tube Ø 7.6 The numbers indicated in parenthesis are valid for the MD 400/20 21

4 MevaFlex ME-prop according to the European Draft Standard (class E) the permissible load bearing capacity of the prop is always 30 kn at all extensions in connection with formwork systems. plate inner tube ME 250/ / kg / kg plate outer tube tube Ø 4.8 adjustment range ME 250/30: m (ME 350/30: m) stroke 11.5 plate inner tube ME 350/30 tube Ø 6 plate outer tube tube Ø tube Ø 7.6 The numbers indicated in parenthesis are valid for the ME 350/30

5 MEP-prop with SAS plate inner tube tube Ø 6.2 according to the European Draft Standard (class E) the permissible load bearing capacity of the prop is always 30 kn at all extensions in connection with formwork systems. When used together with reinforcing frame MEP, the capacity increases to 40 kn per each MEP prop. The SAS quick lowering system ensures that the MEP prop is relieved of the laod with a single hammer blow; the SAS returns automatically to its starting position when removed MEP kg MEP kg plate outer tube adjustment range MEP m (MEP 450: m. lowering by 1 cm stroke 11.5 The numbers indicated in parenthesis are valid for the MEP

6 MevaFlex Pin 14/135 connects the plug connector to the MEP extension piece or to the aluminium profile of the MEP prop when extending the MEP shoring system as well as serves to fasten the forked prop head kg Pin 14/90 connects the forked prop head to the props (MD and ME), to the inner tubes of the MEP props and to the MEP spindle. For tubes of Ø mm kg Beam clamp H20 galvanized, to position intermediate props beneath formwork girders H20. Is attached to props (ME,MD) with the pin 14/90, or 14/135 (MEP) kg 24

7 MD-safety claw to fasten the tripod to the aluminium section of the MEP props. max. 3 cm kg T headed screw M16 Tripod galvanized, auxiliary to stabilize props of Ø mm; can be fixed to the aluminium profile of the MEP props by means of the MD safety claw kg Forked prop head galvanized, is used instead of a drop head to support primary beams when these are placed against a wall. The forked prop head 20 is also used with formwork girders H20, the forked prop head 16 with MD beams or formwork girders H kg kg 25

8 MevaFlex Frames MEP Bracing frames made of aluminium to build shoring towers or table forms; with integrated quick connection facility cm 17.8 kg cm 12.6 kg cm 8.8 kg cm 7.2 kg cm 6.4 kg Cross-bracing clamp galvanized, for the cross bracing of push pull props by means of boards, when the forming height exceeds 3.0 m. Suitable for all props with Ø mm kg 26

9 Trestle for beams 40/30 can be applied to form binding beams or stop ends of free slab edges. all drill holes Ø 6 mm kg Retaining rail serves to attach the trestle for beams and must be mounted, together with the tensioning device, below the cross girder (up to a width of cm and a height of 75 cm) kg 27

10 MevaFlex Tensioning device to economize on trestles for beams. For a smoothly adjustable and safe connection between the trestle for beams 40/30 and the retaining rail kg Height extension to extend the trestles for beams 30/40. Depending on the height of the binding beam the height extension has to be slipped into the trestle for beams 40/30 and attached with the intgreated hammer head screw kg 28

11 Beam support serves as support for a H20 girder, when extending the trestle for beams 30/40 from 40 to 75 cm kg Wedge clamp H20 to attach trestle for beams 30/40 to the H20 beam up to a height of 60 cm kg 29

12 MevaFlex MevaTrenn the release agent for all common forming methods and materials in a 30 litre can. You obtain a clean concrete surface withour stains and impurities. It protects the wooden parts from decay and inflexibility and the metal parts from corrosion; water hazard class: ONE, bio degradable and suitable for water tanks; consumption: 1 litre is sufficient for 50 to 90 m² (without illustration) kg Wax facilitates the cleaning of the formwork; it is applied to the formwork parts that are not in contact with the concrete; we recommend to spray the wax all around the panels while they are piled up; it is sufficient to apply the wax after every 5th of 6th use; consumption: 50 to 100 m². The forming face is still to be treated with MevaTrenn, as wax residues eventually lead to impairments for the subcontractors, (without illustration) kg Lubricant MevaTrenn FT 8 for all common formwork systems, especially recommended for formwork with plastic forming faces. The release agent for all common forming methods and materials in a 30 litre can. You obtain a clean concrete surface without stains and impurities. water hazard class: ONE, bio degradable and suitable for water tanks; consumption: 1 litre is sufficient for 50 to 90 m² (without illustration) kg 30

13 Stainless steel jet FT 8 jet made of long lasting stainless steel. For a fine spraying of MevaTrenn FT 8 especially to plastic forming faces. Suitable to the sprayer with ref. no (without illustration) kg Sprayer 5 litres, for an even and economical application of MevaTrenn and wax (without illustration) kg 31

14 MevaFlex Storage box 120/100 may be piled up; for pins, fork heads, etc; with 2 removable partitions and a hinged front part; height: 60 cm /100 cm kg Piling rack for the storage and transport of props and timber girders. Stapelgestell kg Swivel-type castor 100 the insertion of 4 swivel type castors 100 makes the piling rack mobile. Stapelgestell kg 32

15 Mobile scaffold 100 (alu) Alu-Fahrgerüst max. height = 1.00 m, permits working up to 3.00 m height. Width of planking: 0.60 m kg Height extension for mobile scaffold extends the mobile scaffold up to 1.00 m; permits then working up to 4.00 m height (without illustration) kg Railing clamp 100 can be clamped to slab ends and table forms as guard railing; clamping width: 40 cm kg 33

16 MevaFlex Notes 34

17 Seitenschutzadapter

18 MEVA Schalungs-Systeme GmbH Industriestrasse 5 D Haiterbach Tel. +49 (74 56) Fax +49 (74 56) Internet