For Further information contact MGF Structural Support Systems

Transcription

1 NEW FOR 20

2 For Further information contact Structural Support Systems is a new division within MGF focussed on building refurbishment, facade retention and basement structures. MGF can supply a comprehensive range of specialist support equipment suitable for any type of propping, needling, shoring, or vertical support requirement. Our equipment is available for hire or sale and is supported by a highly experienced Temporary Works Design Team who can provide full detailed design calculations and construction drawings. The new division is backed up by MGF s national network of Hire Centres, Regional Engineers and haulage fleets to ensure safe, reliable and cost effective support solutions for our customers. Head Office: MGF Ltd, Grant House, Lockett Road, AshtonInMakerfield, Wigan, WN4 DE T: E: info@mgf.ltd.uk

3 MGF Shore 100 Soldier MGF s Shore 100 Soldier is a modular Heavy Duty galvanised steel section that can be easily assembled into beams or columns for propping and shoring applications. The system is ideal for building refurbishment projects requiring temporary support whilst permanent openings or structures are installed. The system comes with a comprehensive range of accessories including jacks, swivels, couplers and push pull adaptors. With MGF s Shore 100 Soldiers, it is possible to build three dimensional structural frames for temporary facaderetaining systems or heavy duty frames / dead shores. For this purpose a Multiway connector and special braces have been developed. The Multiway connector is a special node point in the frame structure onto which up to eight soldiers can be connected. A special push/pull bracket has been developed to enable intermediate bracing with soldiers to be used at any arbitrary point on the soldier. Special details have been developed for use in facaderetention applications for connecting the frame to the facade. Heavy leg loads of up to 500kN can be supported by the Multiway connector by doubling up the vertical soldier. A special wedge jack component is available if the shoring has to be struck under load. These jacks have a height adjustment range of up to 100mm. Head Office: MGF Ltd, Grant House, Lockett Road, AshtonInMakerfield, Wigan, WN4 DE T: E: info@mgf.ltd.uk

4 MGF Shore 100 Soldier MGF PushPull Props are available in 1.1m to 10.0m lengths and have many uses in building refurbishment, from backpropping through to complete facade retention. They are an ideal solution for high load vertical, horizontal and raking prop applications and can support vertical loads of up to 320kN. No of Ref No Range M16 x 35 HT Weight (Kg) Head Office: MGF Ltd, Grant House, Lockett Road, AshtonInMakerfield, Wigan, WN4 DE T: E: info@mgf.ltd.uk

5 MGF Shore 100 Soldier Weight/m Area (Gross) Area (Average) E Ixx Iyy rx ry Axial Comp. (Facade) Axial Comp. (Shore) Axial Tension Axial Tension (Reinf. joint) End Reaction Centre Reac. BM. (Hog) Max BM. (Sag) Max BM. (at joint) BM. (Reinf. joint) Tie Load ( Washer) Shear max 20. kg/m cm² cm² N/mm² 157 cm cm cm 4.55 cm 300 kn 100 kn 100 kn 0 kn 115 kn 115 kn 3 knm 3 knm 10 knm 15 kn 115 kn 100 kn Head Office: MGF Ltd, Grant House, Lockett Road, AshtonInMakerfield, Wigan, WN4 DE T: E: info@mgf.ltd.uk

6 For Further information contact MGF Structural Support Solutions can provide in addition to Shore 100 Systems, a variety of alternative systems. These include lightweight aluminium struts and ledger frames (upto 140kN capacity) and Heavy Duty steel hydraulic or mechanical prop systems capable of supporting up to 2500 kn per leg. MGF can also supply rigid modular props capable of supporting loads in excess of 7500 kn per leg. A wide variety of towers and prop centres can be supplied, minimising the need for fabricated structures and props can be used in single or multiple leg support configurations. are ideal for projects requiring: Vertical Props Back Propping Facade Retention Heavy Slab Propping Bridge Propping Access Platforms Frames / Support Grillages Raking Props Flying Shores Towers / Tables Heavy Duty Falsework An extensive range of ancillary equipment is available, including rocking heads used for raking shores, needle beams, grillage beams and sleepers used as base pads. MGF can also supply precast concrete kentledge blocks on request. Head Office: MGF Ltd, Grant House, Lockett Road, AshtonInMakerfield, Wigan, WN4 DE T: E: info@mgf.ltd.uk

7 For Further information contact Bespoke Structural Steel & Hybrid Solutions MGF has a large inhouse structural steelwork manufacturing capability which provides the flexibility to deliver bespoke solutions. This unique ability to deliver the entire package of design, manufacture and supply ensures the most practical, efficient and cost effective solution for your project, giving you a competitive edge in today s marketplace. Combining bespoke and modular components can often provide the optimum solution. You can choose to buy or hire or a combination of both, and we can agree a buyback option during tender stage. MGF is committed to working in partnership with clients, consultants, main contractors and specialist subcontractors to ensure a highly successful outcome for your project. At MGF, we can also offer a preassembled service (up to 2m long components can be delivered), to ensure a quick installation turnaround. Head Office: MGF Ltd, Grant House, Lockett Road, AshtonInMakerfield, Wigan, WN4 DE T: E: info@mgf.ltd.uk

8 For Further information contact North East Thistle Road Littleburn Ind Est Langley Moor County Durham DH7 HJ T: F: Yorkshire Allerton Bywater Business Park Newton Lane Allerton Bywater Castleford WF10 2AL T: F: London City Ray Lamb Way Manor Road Erith Kent DA 2LB T: F: North West Wallwork Road Astley Manchester M29 7JT T: F: Midlands Redbrook Lane Brereton Rugeley Staffordshire WS15 1QU T: F: Head Office Grant House Lockett Road Ashton in Makerfield Wigan WN4 DE T: F: South West Severn Road Chittening Avonmouth Bristol BS11 0YL T: F: London North Units 21 & 22 Airfield Ind Est Cheddington Lane Long Marston Tring Hertfordshire HP23 4QR T: F: NEW DIVISION 20