E.W.Equipment. General Tooling Catalogue DIN 2080 DIN AD/B JIS B 6399 (MAS 403 BT) AD/B DIN69893 (HSK)
|
|
|
- Raymond Herbert Owens
- 7 years ago
- Views:
Transcription
1 General Tooling Catalogue DIN 2080 DIN AD/B JIS B 6399 (MAS 403 BT) AD/B DIN69893 (HSK) 11 Worcester Road, Cheadle Hulme, Cheadle, Cheshire, SK8 5NW Tel: Fax: sales@ewequipment.co.uk web:
2
3 INDEX DIN 2080 TOOLHOLDERS DIN AD & AD/B TOOLHOLDERS JIS B 6339 (MAS 403 BT) TOOLHOLDERS DIN (HSK) TOOLHOLDERS SECTION 1 SECTION 2 SECTION 3 SECTION 4 ACCESSORIES SECTION 5 11 Worcester Road, Cheadle Hulme, Cheadle, Cheshire, SK8 5NW Tel: Fax: sales@ewequipment.co.uk web:
4 SECTION 1 DIN 2080 TOOLHOLDERS 1.01
5 DIN 2080 Collet Chucks for Collets DIN 6499 ER PART NUMBER SK CAPACITY A D ISO30-ER ER ISO30-ER ER ISO40-ER ER ISO40-ER ER ISO40-ER ER ISO50-ER ER ISO50-ER ER Accessories: See Section 5 ER-COLLETS ER-WRENCH 1.02
6 DIN 2080 End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER SK d D A ISO30-WE ISO30-WE ISO30-WE ISO30-WE ISO30-WE ISO30-WE ISO30-WE ISO30-WE ISO40-WE ISO40-WE ISO40-WE ISO40-WE ISO40-WE ISO40-WE ISO40-WE ISO40-WE ISO40-WE ISO40-WE ISO40-WE
7 DIN 2080 End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER SK d D A ISO50-WE ISO50-WE ISO50-WE ISO50-WE ISO50-WE ISO50-WE ISO50-WE ISO50-WE ISO50-WE ISO50-WE ISO50-WE
8 DIN 2080 Morse Taper Adaptors DIN 6383 PART NUMBER SK MT A D ISO30-MT ISO30-MT ISO30-MT ISO40-MT ISO40-MT ISO40-MT ISO40-MT ISO50-MT ISO50-MT ISO50-MT ISO50-MT ISO50-MT
9 DIN 2080 Combi Shell Mill Adaptors DIN 6358 PART NUMBER SK d A l1 D ISO30-FM ISO30-FM ISO30-FM ISO30-FM ISO40-FM ISO40-FM ISO40-FM ISO40-FM ISO40-FM ISO50-FM ISO50-FM ISO50-FM ISO50-FM ISO50-FM Accessories: See Section 5 Includes: Feather key, drive ring and draw-in bolt. WRENCH DIN
10 DIN 2080 Shell Mill Adaptors DIN 6357 for cutters with driving slot PART NUMBER SK d A l D ISO40-SM ISO40-SM ISO40-SM ISO40-SM ISO40-SM ISO50-SM ISO50-SM ISO50-SM ISO50-SM ISO50-SM Includes: Drive and cruciform screw Accessories: See Section 5 d = 40 & d = 60 have additional screw holes in compliance with DIN WRENCH DIN 6368
11 DIN 2080 Drill Chuck Adaptors DIN 238 PART NUMBER SK D A l ISO30-B B ISO30-B B ISO40-B B ISO40-B B ISO40-B B ISO50-B B ISO50-B B
12 DIN 2080 NC-Drill Chucks for left and right rotation PART NUMBER SK d CAPACITY A D ISO40-DC ISO40-DC ISO40-DC ISO50-DC ISO50-DC Includes: Hexagon wrench.
13 DIN 2080 Reduction Adaptors PART NUMBER SK SK1 A D ISO40-RA ISO40-RA ISO50-RA ISO50-RA
14 DIN 2080 Boring Bar Blanks for the production of special tools PART NUMBER SK D A ISO40-BB ISO50-BB
15 DIN 2080 Quick-Change Tapping Heads with length compensation PART NUMBER SK CAPACITY A D d C T ISO30-TH01-055TC 30 M3 - M ISO30-TH02-078TC 30 M5 - M ISO40-TH01-059TC 40 M3 - M ISO40-TH02-097TC 40 M5 - M ISO40-TH03-142TC 40 M14 - M ISO50-TH01-050TC 50 M3 - M ISO50-TH02-082TC 50 M5 - M ISO50-TH03-128TC 50 M14 - M Accessories: See Section 5 TAP ADAPTORS 1.12
16 SECTION 2 DIN AD & AD/B TOOLHOLDERS Pre-balanced G6, min -1 G2,5 Fine Balancing available at extra cost DIN69871 FORM AD/B 2.01
17 DIN AD & AD/B Collet Chucks for Collets DIN 6499 ER PART NUMBER SK FORM CAPACITY A D DV30-ER AD ER DV30-ER AD ER DV30-ER AD ER DV30-ER AD ER DV30-ER AD ER DV30-ER AD ER DV30-ER AD ER DV40-ER AD/B ER DV40-ER AD/B ER DV40-ER AD/B ER DV40-ER AD/B ER DV40-ER AD/B ER DV40-ER AD/B ER DV40-ER AD/B ER DV40-ER AD/B ER DV40-ER AD/B ER DV40-ER AD/B ER DV40-ER AD/B ER DV40-ER AD/B ER Accessories: See Section 5 ER-COLLETS ER-WRENCH 2.02
18 DIN AD & AD/B End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER SK FORM d A D DV30-WE AD DV30-WE AD DV30-WE AD DV30-WE AD DV30-WE AD DV30-WE AD DV30-WE AD DV30-WE AD DV40-WE AD/B DV40-WE AD/B DV40-WE AD/B DV40-WE AD/B DV40-WE AD/B DV40-WE AD/B DV40-WE AD/B DV40-WE AD/B DV40-WE AD/B DV40-WE AD/B DV40-WE AD/B DV40-WE AD/B
19 DIN AD/B End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER SK d A D DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE DV40-WE
20 DIN AD/B End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER SK d A D DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE
21 DIN AD/B End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER SK d A D DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE DV50-WE
22 DIN AD/B End Mill Holders DIN 6359 with coolant channel for Weldon Type End Mills DIN 1835-B PART NUMBER SK d A D DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC DV40-WE CC
23 DIN AD/B End Mill Holders DIN 6359 with coolant channel for Weldon Type End Mills DIN 1835-B PART NUMBER SK d A D DV50-WE CC DV50-WE CC DV50-WE CC DV50-WE CC DV50-WE CC DV50-WE CC DV50-WE CC DV50-WE CC DV50-WE CC DV50-WE CC DV50-WE CC
24 DIN AD/B Whistle Notch Holders DIN 6359 for End Mills DIN 1835-E PART NUMBER SK d A D DV40-WN DV40-WN DV40-WN DV40-WN DV40-WN DV40-WN DV40-WN DV40-WN DV40-WN DV40-WN DV40-WN DV50-WN DV50-WN DV50-WN DV50-WN DV50-WN DV50-WN DV50-WN DV50-WN DV50-WN DV50-WN DV50-WN
25 DIN AD & AD/B Morse Taper Adaptors DIN 6383 PART NUMBER SK FORM MK A D DV30-MT AD DV30-MT AD DV30-MT AD DV40-MT AD/B DV40-MT AD/B DV40-MT AD DV40-MT AD/B DV40-MT AD DV40-MT AD/B DV40-MT AD DV50-MT AD/B DV50-MT AD/B DV50-MT AD DV50-MT AD/B DV50-MT AD DV50-MT AD/B DV50-MT AD DV50-MT AD/B DV50-MT AD
26 DIN AD Combi Shell Mill Adaptors DIN 6358 PART NUMBER SK d A l1 D DV30-FM DV30-FM DV30-FM DV30-FM DV40-FM DV40-FM DV40-FM DV40-FM DV40-FM DV40-FM DV40-FM DV40-FM DV40-FM DV40-FM Includes: Feather key, drive ring and draw-in bolt. Accessories: See Section WRENCH DIN 6368
27 DIN AD Combi Shell Mill Adaptors DIN 6358 PART NUMBER SK d A l1 D DV50-FM DV50-FM DV50-FM DV50-FM DV50-FM DV50-FM DV50-FM DV50-FM DV50-FM DV50-FM Accessories: See Section 5 Includes: Feather key, drive ring and draw-in bolt. WRENCH DIN
28 DIN AD & AD/B Shell Mill Adaptors DIN 6357 PART NUMBER SK FORM d A l1 D DV30-SM AD DV30-SM AD DV30-SM AD DV30-SM AD DV40-SM AD/B DV40-SM AD/B DV40-SM AD/B DV40-SM AD/B DV40-SM AD/B DV50-SM AD/B DV50-SM AD/B DV50-SM AD/B DV50-SM AD/B DV50-SM AD/B Includes: Drive and cruciform screw Accessories: See Section 5 d = 40 & d = 60 have additional screw holes in compliance with DIN WRENCH DIN 6368
29 DIN A Reduction Adaptors PART NUMBER SK SK1 A D DV40-RA DV40-DA DV50-RA DV50-RA Includes: Built in screw for shortened taper tools & additional screw for DIN 2080 tools. 2.14
30 DIN A Boring Bar Blanks for the production of special tools PART NUMBER SK D A DV40-BB DV50-BB
31 DIN A Drill Chuck Adaptors DIN 238 PART NUMBER SK D A l DV30-B B DV30-B B DV40-B B DV40-B B DV40-B B DV50-B B DV50-B B
32 DIN A & AD/B NC-Drill Chucks for left and right rotation PART NUMBER SK FORM d CAPACITY A D DV30-DC08-070A 30 A DV30-DC13-111A 30 A DV40-DC08-070A 40 A DV40-DC13-090A 40 A DV40-DC16-090A 40 A DV40-DC08-070B 40 AD/B DV40-DC13-090B 40 AD/B DV40-DC16-090B 40 AD/B DV50-DC13-106A 50 A DV50-DC16-106A 50 A DV50-DC13-106B 50 AD/B DV50-DC16-106B 50 AD/B Includes: Hexagon wrench.
33 DIN A Quick-Change Tapping Heads with length compensation PART NUMBER SK CAPACITY A D d C T DV30-TH01-065TC 30 M3 - M DV30-TH02-103TC 30 M5 - M DV40-TH01-059TC 40 M3 - M DV40-TH02-097TC 40 M5 - M DV40-TH03-134TC 40 M14 - M DV50-TH01-050TC 50 M3 - M DV50-TH02-082TC 50 M5 - M DV50-TH03-134TC 50 M14 - M Accessories: See Section 5 TAP ADAPTORS 2.18
34 DIN A Quick-Change Tapping Heads without length compensation (Rigid) PART NUMBER SK CAPACITY A D d DV30-TH01-058RG 30 M3 - M DV30-TH02-093RG 30 M5 - M DV40-TH01-062RG 40 M3 - M DV40-TH02-095RG 40 M5 - M DV40-TH03-117RG 40 M14 - M DV50-TH01-060RG 50 M3 - M DV50-TH02-085RG 50 M5 - M DV50-TH03-117RG 50 M14 - M Accessories: See Section TAP ADAPTORS
35 DIN AD/B Hydraulic Chucks PART NUMBER SK d A D DV40-HD DV40-HD DV40-HD DV40-HD DV40-HD DV40-HD DV40-HD DV40-HD DV40-HD Accessories: See Section 5 REDUCING SLEEVES 2.20
36 DIN AD/B Hydraulic Chucks PART NUMBER SK d A D DV50-HD DV50-HD DV50-HD DV50-HD DV50-HD DV50-HD DV50-HD DV50-HD DV50-HD DV50-HD Accessories: See Section REDUCING SLEEVES
37 SECTION 3 JIS B 6339 (MAS 403 BT) TOOLHOLDERS Pre-balanced G6, min -1 G2,5 Fine Balancing available at extra cost JIS B 6399 (MAS 403 BT)FORM AD/B 3.01
38 JIS B 6399 (MAS 403 BT) AD & AD/B Collet Chucks for Collets DIN 6499 ER PART NUMBER SK FORM CAPACITY A D BT30-ER AD ER BT30-ER AD ER BT30-ER AD ER BT30-ER AD ER BT30-ER AD ER BT40-ER AD/B ER BT40-ER AD/B ER BT40-ER AD/B ER BT40-ER AD/B ER BT40-ER AD/B ER BT40-ER AD/B ER BT40-ER AD/B ER BT50-ER AD ER BT50-ER AD ER Accessories: See Section ER-COLLETS ER-WRENCH
39 JIS B 6399 (MAS 403 BT) AD & AD/B End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER SK FORM d A D BT30-WE AD BT30-WE AD BT30-WE AD BT30-WE AD BT30-WE AD BT30-WE AD BT30-WE AD BT30-WE AD BT40-WE AD/B BT40-WE AD/B BT40-WE AD/B BT40-WE AD/B BT40-WE AD/B BT40-WE AD/B BT40-WE AD/B BT40-WE AD/B BT40-WE AD/B BT40-WE AD/B
40 JIS B 6399 (MAS 403 BT) AD & AD/B End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER SK FORM d A D BT40-WE AD BT40-WE AD/B BT40-WE AD/B BT40-WE AD/B BT40-WE AD/B BT40-WE AD BT40-WE AD/B BT40-WE AD/B BT40-WE AD BT40-WE AD/B BT40-WE AD BT40-WE AD/B BT40-WE AD/B
41 JIS B 6399 (MAS 403 BT) AD End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER SK d A D BT50-WE BT50-WE BT50-WE BT50-WE BT50-WE BT50-WE BT50-WE BT50-WE BT50-WE BT50-WE BT50-WE
42 JIS B 6399 (MAS 403 BT) AD & AD/B End Mill Holders DIN 6359 with coolant channel for Weldon Type End Mills DIN 1835-B PART NUMBER SK FORM d A D BT40-WE CC 40 AD/B BT40-WE CC 40 AD/B BT40-WE CC 40 AD/B BT40-WE CC 40 AD/B BT40-WE CC 40 AD/B BT40-WE CC 40 AD/B BT40-WE CC 40 AD/B BT40-WE CC 40 AD/B BT40-WE CC 40 AD/B BT40-WE CC 40 AD/B BT40-WE CC 40 AD/B BT50-WE CC 50 AD BT50-WE CC 50 AD BT50-WE CC 50 AD BT50-WE CC 50 AD BT50-WE CC 50 AD BT50-WE CC 50 AD BT50-WE CC 50 AD BT50-WE CC 50 AD BT50-WE CC 50 AD BT50-WE CC 50 AD BT50-WE CC 50 AD
43 JIS B 6399 (MAS 403 BT) AD & AD/B Whistle Notch Holders DIN 6359 for End Mills DIN 1835-E PART NUMBER SK FORM d A D BT40-WN AD/B BT40-WN AD/B BT40-WN AD/B BT40-WN AD/B BT40-WN AD/B BT40-WN AD/B BT40-WN AD/B BT40-WN AD/B BT40-WN AD/B BT40-WN AD/B BT40-WN AD/B BT50-WN AD BT50-WN AD BT50-WN AD BT50-WN AD BT50-WN AD BT50-WN AD BT50-WN AD BT50-WN AD BT50-WN AD BT50-WN AD BT50-WN AD
44 JIS B 6399 (MAS 403 BT) AD Combi Shell Mill Adaptors DIN 6358 PART NUMBER SK d A l1 D BT30-FM BT30-FM BT30-FM BT40-FM BT40-FM BT40-FM BT40-FM BT40-FM BT40-FM BT40-FM BT40-FM BT40-FM BT40-FM BT50-FM BT50-FM BT50-FM BT50-FM BT50-FM Includes: Feather key, drive ring and draw-in bolt. Accessories: See Section WRENCH DIN 6368
45 JIS B 6399 (MAS 403 BT) AD & AD/B Shell Mill Adaptors DIN 6357 PART NUMBER SK FORM d A l1 D BT30-SM AD BT30-SM AD BT30-SM AD BT30-SM AD BT40-SM AD/B BT40-SM AD/B BT40-SM AD/B BT40-SM AD/B BT40-SM AD/B BT50-SM AD BT50-SM AD BT50-SM AD BT50-SM AD BT50-SM AD Accessories: See Section 5 Includes: Drive and cruciform screw d = 40 & d = 60 have additional screw holes in compliance with DIN 2079 WRENCH DIN
46 JIS B 6399 (MAS 403 BT) AD & AD/B Morse Taper Adaptors DIN 6383 PART NUMBER SK FORM MK A D BT30-MT AD BT30-MT AD BT30-MT AD BT40-MT AD/B BT40-MT AD/B BT40-MT AD/B BT40-MT AD/B BT50-MT AD BT50-MT AD BT50-MT AD BT50-MT AD BT50-MT AD
47 JIS B 6399 (MAS 403 BT) AD Reduction Adaptors PART NUMBER SK SK1 A D BT40-RA BT40-DA BT50-RA BT50-RA Includes: Built in screw for shortened taper tools & additional screw for DIN 2080 tools. 3.11
48 JIS B 6399 (MAS 403 BT) AD Boring Bar Blanks for the production of special tools PART NUMBER SK D A BT40-BB BT50-BB
49 JIS B 6399 (MAS 403 BT) AD Drill Chuck Adaptors DIN 238 PART NUMBER SK D A l BT30-B B BT30-B B BT40-B B BT40-B B BT40-B B BT50-B B BT50-B B
50 JIS B 6399 (MAS 403 BT) AD & AD/B NC-Drill Chucks for left and right rotation PART NUMBER SK FORM d CAPACITY A D BT30-DC08-074A 30 AD BT30-DC13-096A 30 AD BT40-DC08-078A 40 AD BT40-DC13-098A 40 AD BT40-DC16-098A 40 AD BT40-DC13-098B 40 AD/B BT40-DC16-098B 40 AD/B BT50-DC13-110A 50 AD BT50-DC16-110A 50 AD Includes: Hexagon wrench.
51 JIS B 6399 (MAS 403 BT) AD Quick-Change Tapping Heads with length compensation PART NUMBER SK CAPACITY A D d C T BT30-TH01-062TC 30 M3 - M BT30-TH02-095TC 30 M5 - M BT40-TH01-065TC 40 M3 - M BT40-TH02-093TC 40 M5 - M BT40-TH03-126TC 40 M14 - M BT50-TH01-080TC 50 M3 - M BT50-TH02-100TC 50 M5 - M BT50-TH03-142TC 50 M14 - M Accessories: See Section 5 TAP ADAPTORS 3.15
52 JIS B 6399 (MAS 403 BT) AD Quick-Change Tapping Heads without length compensation (Rigid) PART NUMBER SK CAPACITY A D d BT30-TH01-066RG 30 M3 - M BT30-TH02-080RG 30 M5 - M BT40-TH01-065RG 40 M3 - M BT40-TH02-093RG 40 M5 - M BT40-TH03-126RG 40 M14 - M BT50-TH01-080RG 50 M3 - M BT50-TH02-100RG 50 M5 - M BT50-TH03-142RG 50 M14 - M Accessories: See Section TAP ADAPTORS
53 JIS B 6399 (MAS 403 BT) AD Hydraulic Chucks PART NUMBER SK d A D BT40-HD BT40-HD BT40-HD BT40-HD BT40-HD BT40-HD BT40-HD BT40-HD BT40-HD Accessories: See Section 5 REDUCING SLEEVES 3.17
54 JIS B 6399 (MAS 403 BT) AD Hydraulic Chucks PART NUMBER SK d A D BT50-HD BT50-HD BT50-HD BT50-HD BT50-HD BT50-HD BT50-HD BT50-HD BT50-HD BT50-HD Accessories: See Section REDUCING SLEEVES
55 SECTION 4 HSK-A A DIN FORM A TOOLHOLDERS Pre-balanced G6, min -1 G2,5 Fine Balancing available at extra cost 4.01
56 HSK-A DIN 6381 FORM A Collet Chucks for Collets DIN 6499 ER PART NUMBER HSK A D HSKA-032-ER HSK-A HSKA-032-ER HSK-A HSKA-040-ER HSK-A HSKA-040-ER HSK-A HSKA-040-ER HSK-A HSKA-050-ER HSK-A HSKA-050-ER HSK-A HSKA-050-ER HSK-A HSKA-063-ER HSK-A HSKA-063-ER HSK-A HSKA-063-ER HSK-A HSKA-063-ER HSK-A HSKA-063-ER HSK-A HSKA-063-ER HSK-A HSKA-063-ER HSK-A Accessories: See Section ER-COLLETS ER-WRENCH
57 HSK-A DIN 6381 FORM A Collet Chucks for Collets DIN 6499 ER PART NUMBER HSK A D HSKA-080-ER HSK-A HSKA-080-ER HSK-A HSKA-100-ER HSK-A HSKA-100-ER HSK-A HSKA-100-ER HSK-A Accessories: See Section 5 ER-COLLETS ER-WRENCH 4.03
58 HSK-A DIN 6381 FORM A End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER HSK d A D HSKA-032-WE HSK-A HSKA-032-WE HSK-A HSKA-032-WE HSK-A HSKA-032-WE HSK-A HSKA-040-WE HSK-A HSKA-040-WE HSK-A HSKA-040-WE HSK-A HSKA-040-WE HSK-A HSKA-040-WE HSK-A HSKA-050-WE HSK-A HSKA-050-WE HSK-A HSKA-050-WE HSK-A HSKA-050-WE HSK-A HSKA-050-WE HSK-A HSKA-050-WE HSK-A HSKA-050-WE HSK-A HSKA-050-WE HSK-A
59 HSK-A DIN 6381 FORM A End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER HSK d A D HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A HSKA-063-WE HSK-A
60 HSK-A DIN 6381 FORM A End Mill Holders DIN 6359 for Weldon Type End Mills DIN 1835-B PART NUMBER HSK d A D HSKA-080-WE HSK-A HSKA-080-WE HSK-A HSKA-080-WE HSK-A HSKA-080-WE HSK-A HSKA-080-WE HSK-A HSKA-080-WE HSK-A HSKA-080-WE HSK-A HSKA-080-WE HSK-A HSKA-080-WE HSK-A HSKA-080-WE HSK-A HSKA-100-WE HSK-A HSKA-100-WE HSK-A HSKA-100-WE HSK-A HSKA-100-WE HSK-A HSKA-100-WE HSK-A HSKA-100-WE HSK-A HSKA-100-WE HSK-A HSKA-100-WE HSK-A HSKA-100-WE HSK-A HSKA-100-WE HSK-A HSKA-100-WE HSK-A
61 HSK-A DIN 6381 FORM A End Mill Holders DIN 6359 with coolant channel for Weldon Type End Mills DIN 1835-B PART NUMBER HSK d A D HSKA-032-WE CC HSK-A HSKA-032-WE CC HSK-A HSKA-032-WE CC HSK-A HSKA-032-WE CC HSK-A HSKA-040-WE CC HSK-A HSKA-040-WE CC HSK-A HSKA-040-WE CC HSK-A HSKA-040-WE CC HSK-A HSKA-040-WE CC HSK-A HSKA-050-WE CC HSK-A HSKA-050-WE CC HSK-A HSKA-050-WE CC HSK-A HSKA-050-WE CC HSK-A HSKA-050-WE CC HSK-A HSKA-050-WE CC HSK-A HSKA-050-WE CC HSK-A HSKA-050-WE CC HSK-A
62 HSK-A DIN 6381 FORM A End Mill Holders DIN 6359 with coolant channel for Weldon Type End Mills DIN 1835-B PART NUMBER HSK d A D HSKA-063-WE CC HSK-A HSKA-063-WE CC HSK-A HSKA-063-WE CC HSK-A HSKA-063-WE CC HSK-A HSKA-063-WE CC HSK-A HSKA-063-WE CC HSK-A HSKA-063-WE CC HSK-A HSKA-063-WE CC HSK-A HSKA-063-WE CC HSK-A HSKA-063-WE CC HSK-A HSKA-080-WE CC HSK-A HSKA-080-WE CC HSK-A HSKA-080-WE CC HSK-A HSKA-080-WE CC HSK-A HSKA-080-WE CC HSK-A HSKA-080-WE CC HSK-A HSKA-080-WE CC HSK-A HSKA-080-WE CC HSK-A HSKA-080-WE CC HSK-A HSKA-080-WE CC HSK-A
63 HSK-A DIN 6381 FORM A Combi Shell Mill Adaptors DIN 6358 PART NUMBER HSK d A l1 D HSKA-032-FM HSK-A HSKA-032-FM HSK-A HSKA-032-FM HSK-A HSKA-040-FM HSK-A HSKA-040-FM HSK-A HSKA-040-FM HSK-A HSKA-050-FM HSK-A HSKA-050-FM HSK-A HSKA-050-FM HSK-A HSKA-050-FM HSK-A Accessories: See Section 5 WRENCH DIN
64 HSK-A DIN 6381 FORM A Combi Shell Mill Adaptors DIN 6358 PART NUMBER HSK d A l1 D HSKA-063-FM HSK-A HSKA-063-FM HSK-A HSKA-063-FM HSK-A HSKA-063-FM HSK-A HSKA-063-FM HSK-A HSKA-063-FM HSK-A HSKA-063-FM HSK-A HSKA-063-FM HSK-A HSKA-063-FM HSK-A HSKA-080-FM HSK-A HSKA-080-FM HSK-A HSKA-080-FM HSK-A HSKA-080-FM HSK-A HSKA-080-FM HSK-A Accessories: See Section WRENCH DIN 6368
65 HSK-A DIN 6381 FORM A Combi Shell Mill Adaptors DIN 6358 PART NUMBER HSK d A l1 D HSKA-100-FM HSK-A HSKA-100-FM HSK-A HSKA-100-FM HSK-A HSKA-100-FM HSK-A HSKA-100-FM HSK-A Accessories: See Section 5 WRENCH DIN
66 HSK-A DIN 6381 FORM A Shell Mill Adaptors DIN 6357 for cutters with driving slot PART NUMBER HSK d A l1 D HSKA-050-SM HSK-A HSKA-050-SM HSK-A HSKA-050-SM HSK-A HSKA-050-SM HSK-A HSKA-063-SM HSK-A HSKA-063-SM HSK-A HSKA-063-SM HSK-A HSKA-063-SM HSK-A HSKA-063-SM HSK-A HSKA-063-SM HSK-A HSKA-063-SM HSK-A HSKA-063-SM HSK-A HSKA-063-SM HSK-A HSKA-063-SM HSK-A HSKA-080-SM HSK-A HSKA-080-SM HSK-A HSKA-080-SM HSK-A HSKA-080-SM HSK-A
67 HSK-A DIN 6381 FORM A Shell Mill Adaptors DIN 6357 for cutters with driving slot PART NUMBER HSK d A l1 D HSKA-100-SM HSK-A HSKA-100-SM HSK-A HSKA-100-SM HSK-A HSKA-100-SM HSK-A HSKA-100-SM HSK-A
68 HSK-A DIN 6381 FORM A Morse Taper Adaptors DIN 6383 PART NUMBER HSK MK A D HSKA-050-MT HSK-A HSKA-050-MT HSK-A HSKA-050-MT HSK-A HSKA-063-MT HSK-A HSKA-063-MT HSK-A HSKA-063-MT HSK-A HSKA-063-MT HSK-A HSKA-080-MT HSK-A HSKA-080-MT HSK-A HSKA-080-MT HSK-A HSKA-080-MT HSK-A HSKA-100-MT HSK-A HSKA-100-MT HSK-A HSKA-100-MT HSK-A HSKA-100-MT HSK-A HSKA-100-MT HSK-A
69 HSK-A DIN 6381 FORM A Quick-Change Tapping Heads with length compensation PART NUMBER HSK CAPACITY A D d C T HSKA-050-TH01-072TC HSK-A 50 M3 - M HSKA-050-TH02-110TC HSK-A 50 M5 - M HSKA-063-TH01-072TC HSK-A 63 M3 - M HSKA-063-TH02-110TC HSK-A 63 M5 - M HSKA-100-TH01-080TC HSK-A 100 M3 - M HSKA-100-TH02-110TC HSK-A 100 M5 - M Accessories: See Section 5 TAP ADAPTORS 4.15
70 HSK-A DIN 6381 FORM A Quick-Change Tapping Heads without length compensation (Rigid) PART NUMBER HSK CAPACITY A D d HSKA-050-TH01-065RG HSK-A 50 M3 - M HSKA-050-TH02-100RG HSK-A 50 M5 - M HSKA-063-TH01-065RG HSK-A 63 M3 - M HSKA-063-TH02-100RG HSK-A 63 M5 - M HSKA-100-TH01-073RG HSK-A 100 M3 - M HSKA-100-TH02-090RG HSK-A 100 M5 - M Accessories: See Section TAP ADAPTORS
71 HSK-A DIN 6381 FORM A Hydraulic Chucks PART NUMBER HSK d A D HSKA-040-HD HSK-A HSKA-040-HD HSK-A HSKA-040-HD HSK-A HSKA-040-HD HSK-A HSKA-050-HD HSK-A HSKA-050-HD HSK-A HSKA-050-HD HSK-A HSKA-050-HD HSK-A HSKA-050-HD HSK-A HSKA-050-HD HSK-A HSKA-050-HD HSK-A HSKA-050-HD HSK-A Accessories: See Section 5 REDUCING SLEEVES 4.17
72 HSK-A DIN 6381 FORM A Hydraulic Chucks PART NUMBER HSK d A D HSKA-063-HD HSK-A HSKA-063-HD HSK-A HSKA-063-HD HSK-A HSKA-063-HD HSK-A HSKA-063-HD HSK-A HSKA-063-HD HSK-A HSKA-063-HD HSK-A HSKA-063-HD HSK-A HSKA-063-HD HSK-A HSKA-063-HD HSK-A Accessories: See Section REDUCING SLEEVES
73 HSK-A DIN 6381 FORM A Hydraulic Chucks PART NUMBER HSK d A D HSKA-080-HD HSK-A HSKA-080-HD HSK-A HSKA-080-HD HSK-A HSKA-080-HD HSK-A HSKA-080-HD HSK-A HSKA-080-HD HSK-A HSKA-080-HD HSK-A HSKA-080-HD HSK-A HSKA-080-HD HSK-A HSKA-080-HD HSK-A Accessories: See Section 5 REDUCING SLEEVES 4.19
74 HSK-A DIN 6381 FORM A Hydraulic Chucks PART NUMBER HSK d A D HSKA-100-HD HSK-A HSKA-100-HD HSK-A HSKA-100-HD HSK-A HSKA-100-HD HSK-A HSKA-100-HD HSK-A HSKA-100-HD HSK-A HSKA-100-HD HSK-A HSKA-100-HD HSK-A HSKA-100-HD HSK-A HSKA-100-HD HSK-A Accessories: See Section REDUCING SLEEVES
75 HSK-A DIN 6381 FORM A Boring Bar Blanks for the production of special tools PART NUMBER HSK D A HSKA-032-BB HSK-A HSKA-040-BB HSK-A HSKA-050-BB HSK-A HSKA-063-BB HSK-A HSKA-080-BB HSK-A HSKA-100-BB HSK-A
76 HSK-A DIN 6381 FORM A NC-Drill Chucks for left and right rotation PART NUMBER HSK CENTRE COOLANT d CAPACITY A D HSKA-050-DC HSK-A 50 NO HSKA-050-DC HSK-A 50 NO HSKA-063-DC HSK-A 63 NO HSKA-063-DC HSK-A 63 NO HSKA-063-DC13-104CC HSK-A 63 YES HSKA-063-DC16-104CC HSK-A 63 YES HSKA-080-DC HSK-A 80 NO HSKA-080-DC HSK-A 80 NO HSKA-080-DC13-109CC HSK-A 80 YES HSKA-080-DC16-109CC HSK-A 80 YES HSKA-100-DC HSK-A 100 NO HSKA-100-DC HSK-A 100 NO HSKA-100-DC13-111CC HSK-A 100 YES HSKA-100-DC16-111CC HSK-A 100 YES Includes: Hexagon wrench.
77 HSK-A DIN 6381 Delivery Unit for Coolant PART NUMBER HSK D d L HSK-032-CT HSK 32 M10x HSK-040-CT HSK 40 M12x HSK-050-CT HSK 50 M16x HSK-063-CT HSK 63 M18x HSK-080-CT HSK 80 M20x HSK-100-CT HSK 100 M24x HSK-A DIN 6381 Socket Wrench for Connection PART NUMBER HSK D L HSK-032-SW HSK HSK-040-SW HSK HSK-050-SW HSK HSK-063-SW HSK HSK-080-SW HSK HSK-100-SW HSK
78 SECTION 5 ACCESSORIES 5.01
79 ACCESSORIES Collet Chuck with Straight Shank PART NUMBER d CAPACITY L L1 D SS16-ER ER SS20-ER ER SS32-ER ER Accessories: See this Section ER-COLLETS ER-WRENCH 5.02
80 ACCESSORIES ER Spring Collets DIN 6499-B (430 E) PART NUMBER D L RANGE d STEPS ER ER ER ER ER ER ER
81 ACCESSORIES ER Spring Collet Sets DIN 6499-B (430 E) in Wooden Tray PART NUMBER COLLETS IN SET RANGE d ER8 - SET ER11 - SET ER16 - SET ER20 - SET ER25 - SET ER32 - SET ER40 - SET
82 ACCESSORIES Clamping nuts ER DIN 6499 Balanced PART NUMBER ER D THREAD M NUT-ER16-BAL M22X1.5 NUT-ER25-BAL M32X1.5 NUT-ER32-BAL M40X1.5 NUT-ER40-BAL M50X1.5 ACCESSORIES Clamping nuts ER DIN 6499 Ball Bearing Version PART NUMBER ER D THREAD M NUT-ER16-BB 16 30MM Hex Type - 27MM X Flats M22X1.5 NUT-ER25-BB M32X1.5 NUT-ER32-BB M40X NUT-ER40-BB M50X1.5
83 ACCESSORIES Clamping nuts ER DIN 6499 for Sealing Discs PART NUMBER ER D THREAD M NUT-ER16-SD 16 28MM Hex Type - 25MM X Flats M22X1.5 NUT-ER25-SD M32X1.5 NUT-ER32-SD M40X1.5 NUT-ER40-SD M50X1.5 ACCESSORIES Sealing Discs for ER SD Nuts PART NUMBER ER d STEPS SD-ER SD-ER SD-ER SD-ER
84 ACCESSORIES Pull Studs (Converter Type) DIN with Internal Screw Thread PART NUMBER SIZE D M I L h P/STUD-DIN2080-M16 M16 25 M P/STUD-DIN2080-M24 M M ACCESSORIES Pull Studs DIN A + B PART NUMBER FORM SIZE D M I L h P/STUD-DV30A A M12 13 M P/STUD-DV40A A M16 19 M P/STUD-DV50A A M24 28 M P/STUD-DV40B B M16 19 M P/STUD-DV50B B M24 28 M DIN69872 Form B Inc. O-ring 5.07
85 ACCESSORIES Pull Studs (Solid) MAS BT PART NUMBER SIZE D M I L h P/STUD-BT30-MAS 1 M12-45º 11 M P/STUD-BT30-MAS 2 M12-60º 11 M P/STUD-BT30-MAS 3 M12-90º 11 M P/STUD-BT40-MAS 1 M16-45º 15 M P/STUD-BT40-MAS 2 M16-60º 15 M P/STUD-BT40-MAS 3 M16-90º 15 M P/STUD-BT50-MAS 1 M24-45º 23 M P/STUD-BT50-MAS 2 M24-60º 23 M P/STUD-BT50-MAS 3 M24-90º 23 M Pull Studs (With Through Hole & O-Ring) MAS BT PART NUMBER SIZE D M I L h P/STUD-BT40-MAS 1 H M12-45º 15 M P/STUD-BT40-MAS 2 H M12-60º 15 M P/STUD-BT40-MAS 3 H M12-90º 15 M P/STUD-BT50-MAS 1 H M24-45º 23 M P/STUD-BT50-MAS 2 H M24-60º 23 M P/STUD-BT50-MAS 3 H M24-90º 23 M Other types of Pull Stud are available - Please contact us for details. 5.08
86 ACCESSORIES Tap Adaptors with Slipping Clutch ACCESSORIES Tap Adaptors without Clutch (Solid) PART NUMBER D d I1 TAC01-M3 (3.5X2.7) TAC01-M3.5 (4X3) TAC01-M4 (4.5X3.4) TAC01-M5-M6 (6X4.9) TAC01-M8 (8X6.2) TAC01-M10 (7X5.5) TAC01-M10 (10X8) TAC01-M12 (9X7) TAC01-M14 (11X9) PART NUMBER D d I1 TAS01-M3 (3.5X2.7) TAS01-M3.5 (4X3) TAS01-M4 (4.5X3.4) TAS01-M5-M6 (6X4.9) TAS01-M8 (8X6.2) TAS01-M10 (7X5.5) TAS01-M10 (10X8) TAS01-M12 (9X7) TAS01-M14 (11X9) TAC02-M5-M6 (6X4.9) TAC02-M8 (8X6.2) TAC02-M10 (7X5.5) TAC02-M10 (10X8) TAC02-M12 (9X7) TAC02-M14 (11X9) TAC02-M16 (12X9) TAC02-M18 (14X11) TAC02-M20 (16X12) TAC02-M22 (18X14.5) TAS02-M5-M6 (6X4.9) TAS02-M8 (8X6.2) TAS02-M10 (7X5.5) TAS02-M10 (10X8) TAS02-M12 (9X7) TAS02-M14 (11X9) TAS02-M16 (12X9) TAS02-M18 (14X11) TAS02-M20 (16X12) TAS02-M22 (18X14.5) TAC03-M14 (11X9) TAC03-M16 (12X9) TAC03-M18 (14X11) TAC03-M20 (16X12) TAC03-M22-M24 (18X14.5) TAC03-M27 (20X16) TAC03-M30 (22X18) TAC03-M33 (25X20) TAC03-M36 (28X22) TAS03-M14 (11X9) TAS03-M16 (12X9) TAS03-M18 (14X11) TAS03-M20 (16X12) TAS03-M22-M24 (18X14.5) TAS03-M27 (20X16) TAS03-M30 (22X18) TAS03-M33 (25X20) TAS03-M36 (28X22)
87 ACCESSORIES Wrench DIN 6368 PART NUMBER D WRENCH-FMA-16 16/M8 WRENCH-FMA-22 22/M10 WRENCH-FMA-27 27/M12 WRENCH-FMA-32 32/M16 WRENCH-FMA-40 40/M20 ACCESSORIES Clutch drive rings DIN 6366 PART NUMBER d D a b h CDR-FMA CDR-FMA CDR-FMA CDR-FMA CDR-FMA
88 ACCESSORIES Draw-in bolt DIN 6367 PART NUMBER SIZE M D K L DIB-FMA M DIB-FMA M DIB-FMA M DIB-FMA M DIB-FMA M DIB-FMA M DIB-FMA M ACCESSORIES Wrench ER PART NUMBER SIZE D WRENCH-ER16 (28MM) 1-10 (ER16) 25MM A/F For Hex Type Nut WRENCH-ER (ER16) 32 WRENCH-ER16 (30MM) 1-10 (ER16) 27MM A/F For Hex Type Nut WRENCH-ER (ER25) 42 WRENCH-ER (ER32) 50 WRENCH-ER (ER32)
89 ACCESSORIES Reducing sleeves for Hydraulic Chucks PART NUMBER D d HRS HRS HRS HRS HRS HRS HRS HRS
Driven Toolholders for SAUTER Turrets
Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets
KOMET. Adaptors Perfecting the Connection. With our comprehension programme of tool adaptors we have the right answer for every requirement.
KOMET Adaptors Perfecting the Connection With our comprehension programme of tool s we have the right answer for every requirement. Adaptors with connections specified by manufacturers available on request.
TOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
CAD 302.02.10.1 SK 30 1 10 (ER 16) 100 32 302.02.16.1 SK 30 2 16 (ER 25) 100 42 302.02.20.1 SK 30 2 20 (ER 32) 100 50
Spannfutter für Spannzangen DIN 6499 (ISO 15488) System ER Collet chucks for collets DIN 6499 (ISO 15488) ER-system Mandrins à pinces pour pinces DIN 6499 (ISO 15488) système ER Verwendung: Zur Aufnahme
Static and Driven Tools LB and LT Series
Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
About Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
Milling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
L I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
Static Toolholders for CNC Turning Machines
Static Toolholders for CNC Turning Machines Table of Contents Type Page Combi Toolholder Boring Bar Holder Turning Tool Holder Combi Outer Turning Toolholder Combi Turning Toolholder for facing QUICK TURN
ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
Number Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
Phone (800) 821-8010 Fax (330) 920-0972 e-mail sales@pdq-marlin.com
1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine Holders...7
GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING
GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING AND lubrication Check- and Measuring instruments for optimal tool clamping and lubrication Pre-requisite for perfect machining results
Ultra Live Center RN. Clamping tools for clamping on machine tools. NEIDLEIN revolving ultra live centers type RN ensure: Type RN with morse taper
Ultra Live Center RN Type RN with morse taper NEIDLEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the application of bearing and the stable
RAPID DIAL TEST INDICATORS
RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot
DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
1.8 CRANKSHAFT OIL SEALS
SERIES 60 SERVICE MANUAL 1.8 CRANKSHAFT OIL SEALS An oil seal is fitted between each end of the crankshaft and the bores of the flywheel housing and gear case cover to retain the lubricating oil in the
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
Alfra Rotabest 100 Metal Core Drilling Machine. Operation Manual
Alfra Rotabest 100 Metal Core Drilling Machine Operation Manual 06/2005 1. Technical Data Prod. No.: 18630 Name : Rotabest 100 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant
Fixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
Electric chain hoists LIFTKET
Electric chain hoists LIFTKET 1 Spare part list AA AB Description of spare part Page Lifting gear section 01: hoist body 4 Version 1-1.3 5 Version 2-4.2 6 Version 5-7.2 7 Version 8.1-9.1 8 Version 1AK-5.1AK
DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
Providing Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
YUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
B10 B11 B12 B18 B19 B20 B21
MEA MICRO CUCK MEA NEW AY CUCK MEA E CUCK MEA DOUE POWER CUCK NEW AY CUCK NEW i-power MIIN CUCK MEA ER RIP MEA SYNCRO Tapping older FACE MI AROR Type FMC ANE EAD AIR TURINE SPINDE I SPINDE i-jet ODER DYNA
413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
indexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
The Boxford range of 3-axis CNC Machining Centres are
The Boxford range of 3-axis CNC Machining Centres are requirements. Featuring a high-end machine controller, utilising the latest motion control technology, they can satisfy all your 2½ and 3D milling
Contents. VDI system. BMT system. 1. Driven Coupling Type DIN 1809 DIN 5480 DIN 5482 HAAS SPUR MT TOEM (BARUFFALDI) 1809 5480 MORI SEIKI
ISO 9001:2008 Contents 1. Driven Coupling Type VDI system DIN 1809 DIN 5480 DIN 5482 SPUR MT TOEM (BARUFFALDI) HAAS BMT system 1809 5480 MORI SEIKI 2. Turret Type Radial Turret Axial Turret 3. Driven Tool
4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580
PRECISION LIVE TOOLING & MACHINE TOOL ACCESSORIES MADE IN THE USA 4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580 Patent Pending Live Tooling Planet Products Corporation
Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
How to select toolholding
ow to select tool holding ow to select toolholding eneral Turning ow to select toolholding 1 Select a coupling size - Turn to the ordering page and select the right coupling size. CParting and rooving
Number Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
Manual HSK clamping technology
Manual HSK clamping technology Simplicity, precision and speed as well as flexibility, safety and cost-effectiveness these are the demands placed on systems in modern production technology. The MAPAL HSK
HYDRO-FIX hydraulic clamping system. For boring bars and driven tools
HYDRO-FIX hydraulic clamping system For boring bars and driven tools Improve your productivity HYDRO-FIX hydraulic clamping system has successfully been used for over 15 years. HYDRO-FIX is excellent for
LK Wallbox UNI Push. Assembly. Only intended for LK PE-X Universal Pipe X.
LK Wallbox UNI Push Only intended for LK PE-X Universal Pipe X. LK Wallbox UNI Push 16 Single Article no. 188 06 38 LK Wallbox UNI Push 20 Single Article no. 188 06 39 LK Distance template LK Wallbox UNI
Milling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a
Milling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a rotating cutter or endmill which rotates about the spindle
turning instead of measuring
PARAT -way-indexing-quickchange turret-toolpost turning instead of measuring Indexing accuracy 0,005 mm (0,0002 ) Internal and external operations in one setting Quick-clamping System with 0 Positions
MULTI PURPOSE MACHINE OPERATION MANUAL CHIZHOU HOUSEHOLD MACHINE-TOOL WORKS THE PEOPLE S REPUBLIC OF CHINA
HQ400 HQ400/1 MULTI PURPOSE MACHINE OPERATION MANUAL CHIZHOU HOUSEHOLD MACHINE-TOOL WORKS THE PEOPLE S REPUBLIC OF CHINA CONTENTS 1 OUTSIDE DRAWING 3 2 TECHNICAL SPECIFICATIONS 3 3 APPLICATION 4 4 CONSTRUCTION
Parts#MB003-003 Reverse Gear MAMBA (Monoblock for Cable operated) For 5 speed Trans., '87 to '06 Big Twin models (except '06 Dyna)
Installation Instructions Reverse Gear MAMBA (Monoblock for Cable operated) Read and become familiar with these installation instructions before start. Two Piece for H-D 5 Speed Trans., Cable operated
FAG Hydraulic nuts. Technical Product Information
FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables
Boxed sets. 6 point impact socket sets 108-111. Impact accessory sets 112. Impact adaptor sets/bi-hexagon sets 113. 12 point socket sets 113
9 Boxed sets 6 point impact socket sets 108-111 Impact accessory sets 112 Impact adaptor sets/bi-hexagon sets 113 12 point socket sets 113 Impact magnetic socket sets 114-115 Male hexagon driver sets 116-117
Tools Spares Guide. The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts.
Tools Spares Guide Tools Spares Guide The POP Tools Spares Guide is a users and buyers manual which assists in the identification of required spare parts. Throughout the guide you will find:- Exploded
Quick change SDS converter for regular percussion power tools
Quick change SDS converter for regular percussion power tools This converter adapts regular percussion impact machines to receive SDS shank tools. Quick change of SDS shank tools through the axial sliding
3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
White Industries Rear Hub Instructions
White Industries Rear Hub Instructions Tool required: 2mm allen/hex wrench, 19mm socket, 20mm socket, and mallet. 1. Loosen the set screws located in the adjusting collar by using a 2mm allen wrench inserted
Lathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
HIGH-PERFORMANCE REAMING. HORN-System DR. License. Modular Tooling System Ø 11.9-140.6 mm. In the UNITED STATES call us toll free 1-888 - 818 HORN
HIGH-PERFORMANCE REAMING R HORN-System DR License Modular Tooling System Ø 11.9-140.6 mm R1 R HIGH-PERFORMANCE REAMING INSERT type DR straight fluted Cutting edge Ø Ds 11.900-140.600 mm for through hole
Mandrel system MIS. www.microcentric.de
Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:
ACCESSORIES FOR TURNING
ACCESSORIES FOR TURNING Accessories for turning D140 D180 D210 D240 D250 D280 D320 D330 D360 D420 D460 D560 Plane clamping disk Ø 170 mm 344 0295 Plane clamping disk Ø 200 mm 344 0352 Plane clamping disk
MARK-3 DIS Digital Ignition Solution
Overview: MARK-3 DIS Digital Ignition Solution WATERAX offers a conversion kit Digital Ignition Solution (DIS) for users that want to convert a MARK-3 from breaker points and mechanical cut-out switch
Weeke CNC Machining Center, Model BP-150 Optimat
Weeke CNC Machining Center, Model BP-150 Optimat Weeke's BP-150 is a truly industrial machine designed primarily for point-topoint boring and machining of flat components without special workpiece fixtures.
DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
Operating Instructions
Operating Instructions Sauter Tooling for more information, please consult www., and for the complete standard tooling programme, please visit www.sauter-tools.com Sauter: The world turns with us! Table
How To Program A Drill And Drill
CATALOGUE Tapping Machine Rapid Drill Set-Up Robotorn PNEUMATIC-ELECTRONIC-HYDRAULIC TAPPING MACHINES Comercial De Maquinaria Alzira S.L. Via A. Volta, 35 23845 Costa Masnaga (LC) T. 031.856372 F. 031.856372
Chapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
Fasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
These Installation Instructions are valid for antennas in the following version:
Installation Instructions 4 ft CompactLine Antennas (with E-Mount 250 km/h) SB, SBX NMT 560-05(e) These Installation Instructions are valid for antennas in the following version: Reflector Ø 1.2 m (4 ft)
3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
Electro-hydraulic pressure switches type DG
Electro-hydraulic pressure switches type DG Pressure p max = 700 bar See also: For electronic pressure switches type DG 5 E see D 5440 E Analogous pressure transducer type DT 1 see D 5440 T Analogous pressure
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,
Slide the new steering column shaft through the steering column from the driver compartment.
Slide the new steering column shaft through the steering column from the driver compartment. Push the column shaft through the steering column until the machined end is out past the column lower bushing.
Round Housing with Side Ports
Power Steering Steering Control Unit (SCU) Parts and Repair Information 5 Series Steering Control Units 001 Square Housing with Side Ports Round Housing with Side Ports T E L RP Round Housing with End
PARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS
PARTS BOOK hohner /5S Stitcher Head 007/hohner/5S/0/KS Vol. UB70606-0 Hohner /5 Revision Control List Page / Correction (a: Parts No. c: Description d: S/N e: Remarks f: Other g: Registration h: Illustration
Reaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
Mueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
OPTICAL MEASURING MACHINES
OPTICAL MEASURIN MACHINES SYLVAC SCAN Dedicated to the fast and contactless measuring of cylindrical parts, our new SCAN machines are based on the principle of the scanner. This technique allows to reproduce
Micro Cart User's Guide
Micro Cart User's Guide To take full advantage of the ergonomic features of your new Sun Mountain Micro Cart, please read the following information. SUN MOUNTAIN 1 Your Micro Cart has several innovative
Plumbing. www.armeg.co.uk. The convenient, compact and clever solutions to your wrench and hand tool needs
INNOVATIVE DRILLING & TOOL SOLUTIONS www.armeg.co.uk Plumbing The convenient, compact and clever solutions to your wrench and hand tool needs Complete Heating Installation with PHI Wrench Set Easy Tap
Quick Reference Catalog
Gearboxes Turrets Y-Axis Rotary Tools Tool Discs B-Axis Quick Reference Catalog WWW.BARUFFALDI.IT TB Servo Turret SERVO MOTOR TURRETS TB-type turrets rotate thanks to a BRUSHLESS SERVO MOTOR controlled
Ceta Form Tool Containers & Assortments
Ceta Form Tool Containers & Assortments Smart service solutions A50IM-79 79 Piece Industrial Maintenance Kit 2 C-Plus Phillips screwdrivers, PH1x80; PH2x100 mm F14 15 Upgrade Kits upgrade the basic kit
Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.
Micrio WS1 Replacement Wind Speed Sensor and WC1 Replacement Wind Compass Sensor for Raymarine ST50 and ST60 Wind Instruments. Rev 4.1 The Micrio WS1 Wind Speed Sensor and WC1 Compass Sensor are direct
Installation Instructions for Wamilton s Steering Cable Modification. Remove the cables from the white retaining clip
Installation Instructions for Wamilton s Steering Cable Modification The steering cable on the 08 and later superjets is too short and limits the throw of the nozzle. By changing to an older style steering
Hive Top Ventilation Shims
Hive Top Ventilation Shims When preparing your bee hives for the winter, it is very important to provide for ventilation at the top of the hive. Through out the winter, the bees are expelling a lot of
HORIZONTAL INSTALLATION
THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof
MEASURING TOOLS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOOL MASTER ACCU CENTER. ALIGNMENT TOOL for ATC arm DYNA FORCE
MEASURING TOOS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOO MASTER ACCU CENTER AIGNMENT TOO for ATC arm DYNA FORCE TOO PRESETTER type TPS EVE MASTER 3 3 4 5 5 6 7 8 9 MEASURING
Hose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
Post Mount Light Installation*
Post Mount Light Installation* *For the general installation of most Post Mount Spotlights, many vehicles may need slight modifications to these instructions. You will need the following tools: High torque
CAM-03, Camshaft Assembly Oil Seal Replacement
CAM-03, Camshaft Assembly Oil Seal Replacement Tools Jack stands Floor Jack Metric Socket set Metric Wrench set Porsche Timing Belt Tension tool (P9201) Flywheel Lock (P9206) Balance Shaft Pin Spanner
Wood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
Resharpening Companion
Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace
is decisive if contour turning is involved.
Toolholder selection The clamping system of the insert in the toolholder should be selected first. Toolholders have been ed to provide optimum performance in different applications and usually over a broad
Industrial Cutting Tool Organization CNC Storage & Transport
Industrial Cutting Tool Organization CNC Storage & Transport Since 1926, a commitment to you, our customer. Nearly a century ago, Gene Huot (pronounced Hewitt ) invented and marketed the famous Drill Index,
FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
Spare part list. For information only, will not be exchanged when altered! Date. piece Brush holder 220V/240V assy 7
cid_etlx V. 0. GIESE For information only, will not be exchanged when altered! Date 9.0.00 4:43 Cnt-no Item-no QuantityUnit Name Specification Proc.restr. 4 348 piece Stator 0-40V 34 piece Rotor 0/40V
BSME Series SEXC Series
TOOLING NEWS E-124 P M K N S H CBN Small Hole Boring Bar Systems BSME Series SEXC Series BSME SEXC Series with brazed CBN cutting edge Minimum bore diameter = 2,5mm Series with indexable CBN insert Minimum
Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks)
Installation Manual SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Welcome to the world of TracRac! We re delighted that you have chosen TracRac, the ultimate sliding truck rack system.
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP
ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem
StarChip 400. StarChip 400. More productive, more cost-effective - the Inclined Bed Lathe StarChip. CNC Inclined Bed Lathe. www.knuth.
CNC Inclined Bed Lathe More productive, more cost-effective - the Inclined Bed Lathe StarChip Center width 550 mm Turning diameter over bed (max) 360 mm Speed range 50-6000 min -1 8-station tool turret
TRANS-05, Torque Tube Removal, Rebuilding, and Installation
TRANS-05, Torque Tube Removal, Rebuilding, and Installation Tools Metric Wrench Set Metric Socket Set Jack Stands (6 minimum) Floor Jack 8mm Cheesehead socket (also referred to as 12 point internal socket
SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC
Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut