B10 B11 B12 B18 B19 B20 B21

Size: px
Start display at page:

Download "B10 B11 B12 B18 B19 B20 B21"

Transcription

1 MEA MICRO CUCK MEA NEW AY CUCK MEA E CUCK MEA DOUE POWER CUCK NEW AY CUCK NEW i-power MIIN CUCK MEA ER RIP MEA SYNCRO Tapping older FACE MI AROR Type FMC ANE EAD AIR TURINE SPINDE I SPINDE i-jet ODER DYNA TEST

2 S P I N D E S Y S T E M DUA CONTACT DIN A (I-PUS) R Coolant-through hole Clamping Range : ø0.5 - ø6.05 Type T Micro diameter design is ideal for high speed applications in tight areas with small diameter cutting tools. DV No. 1 DV / DV SANK I-PUS tools can be used in machining centers with conventional spindles. Clamping Range 1 DV0-MEA3S- T - T -1T -MEAS- T - T -1T -MEA6S- T - T -1T min-1 28,000 22,000 28,000 22,000 28,000 22,000 Collet NC3S- NCS- NC6S- Nut MN3S MNS MN6S MEA NUT is included. Spare Parts Accessories MEA NUT MEA WRENC MICRO COET 2 MICRO COET PROTECTIVE CASE TAPER CEANER MEA MICRO CUCK MEA3S MEAS MEA6S MN3S MNS MN6S MR10 MR12 MR1 NC3S- NCS- NC6S- N3S NS N6S SC-NC3S SC-NCS SC-NC6S 1

3 DIN A/ (I-PUS) S P I N D E S Y S T E M DUA CONTACT R Coolant-through hole Clamping Range : ø0. - ø Ideal ultra precision holders for high speed machining with carbide drills, reamers and endmills. Wide range of lengths and a variety of collet series sizes covers all machining applications. 1 I-PUS tools can be used in machining centers with conventional spindles. DV No. For DV, refer to the following page. DV / DV SANK DV0-MEA 6N MEA 8N MEA10N MEA13N MEAN MEAN MEA NUT is included. Clamping Range ,000 1,000 9,000,000 1,000 9,000,000 10,000,000 10,000,000,000,000 10,000,000,000,000 10,000 Collet NC 6- NC 8- NC13- MN 6 MN NC10- MN10 NC- NC- Nut MN13 MN MN For NEW AY COET 3 For NEW AY COET for ENDMI 7 For MEA WRENC 3 For ADJUSTIN SCREW 3 2

4 S P I N D E S Y S T E M DUA CONTACT DIN A/ (I-PUS) R Coolant-through hole Clamping Range : ø0. - ø,000 1 DV / DV SANK I-PUS tools can be used in machining centers with conventional spindles. DV-MEA 6N MEA 8N MEA10N MEA13N MEAN MEAN MEA NUT is included. Clamping Range DV No ,000,000 1,000 9,000,000,000,000 11,000,000,000,000 12,000 18,000 18,000,000 12,000 17,000 17,000,000 13,000,000,000 13,000 Collet NC 6- NC 8- NC13- MN 6 MN NC10- MN10 NC- Nut MN13 MN NC- MN Spare Parts Accessories MEA NUT MEA WRENC NC COET 3 FOR ENDMI COET 7 9 SEAIN NUT MEA PERFECT SEA ADJUSTIN SCREW Rubber MEA NEW AY CUCK MEA 6N MEA 8N MEA10N MEA13N MEAN MEAN MN 6 MN 8 MN10 MN13 MN MN MR MR MR MR MR MR6 NC 6- NC 8- NC10- NC13- NC- NC- MPS 6- MPS 8- MPS10- MPS13- MPS- MPS- NA 6 NA 8 NA10 NA13 NA NA M 7 M 9 M11 M1 M18 M

5 DIN A/ (I-PUS) S P I N D E S Y S T E M DUA CONTACT R Coolant-through hole Clamping Range : ø3 - ø12 Exclusively designed with the advanced technology for high speed endmilling. The long gripping length of the collet provides a powerful gripping force. 1,000 I-PUS tools can be used in machining centers with conventional spindles. 1 DV0-MEA 6E MEA 8E MEA 10E MEA 13E DV-MEA 6E-1 - -MEA 8E-1 - -MEA 10E MEA 13E DV No.,000,000 29,000,000,000 29,000,000,000 29,000,000,000 29,000,000 1,000,000,000,000,000,000 18,000 18,000,000 Collet MEC 6- MEC 8- MEC 6- MEC 8- MEC10- MEC13- MEC10- MEC13- Nut MEN 6 MEN 8 MEN10 MEN13 MEN 6 MEN 8 MEN10 MEN DV / DV SANK 1. MEA E NUT is included. Spare Parts Accessories MEA E NUT MEA WRENC MEA E COET 11 SEAIN NUT MEA E PERFECT SEA ADJUSTIN SCREW Rubber 11 MEA E CUCK MEA 6E MEA 8E MEA10E MEA13E MEN 6 MEN 8 MEN10 MEN13 MR MR MR MR MEC 6- MEC 8- MEC10- MEC13- EPS 6- EPS 8- EPS10- EPS13- NA 6 NA 8 NA10 NA13 M 7 M 9 M11 M

6 S P I N D E S Y S T E M DUA CONTACT DIN A/ (I-PUS) R Coolant-through hole Clamping Range : ø - ø Type DS For coolant to cutting tool periphery Close to integral rigidity and precision of a solid toolholder. Flange contacting nut assures highest rigidity.,000 DV / DV SANK DV No. Min Clamping ength E DV No. Min Clamping ength E E COOANT COOANT 1 1 Fig.1 Fig.2 I-PUS tools can be used in machining centers with conventional spindles. Fig. 1 E DV0-MEADS- A -MEADS- -MEADS-A -MEADS- DV-MEADS- 70 -MEADS- -MEADS- -MEADS- -MEADS- 1. Wrench is ordered separately. 2. "" indicates the adjustment length with an Adjusting Screw ,000 22,000 18,000 12,000,000,000 18,000 12, For STRAIT COET 15 Accessories MEA WRENC ADJUSTIN SCREW W 1 MEA DOUE POWER CUCK DV0-MEADS -MEADS -MEADS -MEADS DV-MEADS -MEADS -MEADS -MEADS -MEADS MR MR MR62 MR70 MR6 MR MR70 MR MR99 MA-M MA-M MA-MS MA-M MA-M MA-M2 MA-M2 1 W MP MP M2P

7 DIN A/ Coolant-through hole Clamping Range : ø0. - ø reat variety in length in order to support high precision machining.,000 1 DV0-NS NS NS NS NS NS Clamping Range NEW AY NUT is included. 2. Max.,000 is valid for DV0 with = or mm DV No Collet NC 6- NC 8- NC10- NC13- NC- NC- Nut NN 6 NN 8 NN10 NN13 NN NN For DV, refer to the following page For NEW AY COET 3 For NEW AY COET for ENDMI 7 For WRENC 7 For ADJUSTIN SCREW 7 For TAP DRIVIN ACK STOP 8 DV / DV SANK 6

8 DIN A/ Coolant-through hole Clamping Range : ø0. - ø 1 DV / DV SANK DV-NS NS NS NS NS NS Clamping Range DV No Collet NC 6- NC 8- NC10- NC13- NC- NC- Nut NN 6 NN 8 NN10 NN13 NN NN NEW AY NUT is included. Spare Parts Accessories NEW AY NUT WRENC NC COET 3 FOR ENDMI COET 7 10 AY PERFECT SEA ADJUSTIN SCREW Rubber NEW AY CUCK NS 6 NS 8 NS10 NS13 NS NS NN 6 NN 8 NN10 NN13 NN NN NK 6 NK 8 NK10 NK13 NK NK NC 6- NC 8- NC10- NC13- NC- NC- PS 6- PS 8- PS10- PS13- PS- PS- NA 6 NA 8 NA10 NA13 NA NA M 7 M 9 M11 M1 M18 M For TAP DRIVIN ACK STOP 8 7

9 DIN A/ Coolant-through hole Clamping Range : ø - ø I's original design of slit structure supports heavy and finish end milling with high power and precision. Axial length adjusting screw (Optional) Min Clamping ength E DV No. Min. Clamping ength E C-Spanner DV / DV SANK DV0-MCS MCS MCS DV-MC- - -MC- - -MC MC FK5- FK58-62 FK68-75 FK58-62 FK58-62 FK- FK Wrench and Axial Adjusting Screw are ordered separately. 2. "" indicates the adjustment length with an Adjusting Screw. For STRAIT COET 15 Accessories C-SPANNER ADJUSTIN SCREW W 1 NEW i-power MIIN CUCK 1 W DV0-MCS -MCS -MCS DV-MC -MC -MC -MC FK5- FK58-62 FK68-75 FK58-62 FK58-62 FK- FK92- MA-M MA-M MA-MS MA-M MA-M MA-M2 MA-M MP1.5 MP1.5 MP1.5 MP1.5 MP1.5 M2P1.5 M2P

10 S P I N D E S Y S T E M DUA CONTACT DIN A/ (I-PUS) DV / DV SANK R MEA ER RIP DV0-MEAER MEAER MEAER MEAER DV-MEAER MEAER MEAER MEAER I-PUS tools can be used in machining centers with conventional spindles Mega ER Nut is included. Adjusting screw, collet and wrench must be ordered separately. 2. "" indicates the adjustment length with an adjusting screw. 3. alance screws are not included.. Mega ER rip is not able to use DIN699 Form-A collets and ESX collets. Spare Parts MEA ER NUT Coolant-through hole Clamping Range : ø1.9 - ø igh precision collet, nut and body that outperforms standard ER systems. Reliable and stable runout accuracy will also tremendously contribute to improving machining capability and cost reduction. Accessories MEA WRENC ER COET Caution DV No Nut,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000,000 18,000 18,000 18,000,000 17,000 17,000 17,000,000,000,000,000 Adjusting Screw (optional) To maintain the accuracy of the tool assembly, do not use collets and nuts manufactured by another company with the chuck body of I s Mega ER rip. Also, we cannot guarantee the accuracy statement for our collets if they are assembled on the chuck body of another manufacturer. SEAIN NUT MEA ER PERFECT SEA MERN MERN MERN MERN MERN MERN MERN MERN ADJUSTIN SCREW Rubber 1 MEA ER RIP MEA ER MEA ER MEA ER MEA ER MERN MERN MERN MERN MR MR MR MR ERC- ERC- ERC- ERC- MERPS- MERPS- MERPS- MERPS- NA10 NA13 NA NA M11 M1 M18 M21 3 9

11 DIN A/ (I-PUS) S P I N D E S Y S T E M DUA CONTACT R MEA SYNCRO Tapping older Coolant-through hole Tapping Range : M2 - M ody Tap older Tap DV No. 1 2 d 1 DV / DV SANK I-PUS tools can be used in machining centers with conventional spindles. Tap older Tapping Range d DV0-MT 6- -MT12- -MT- DV-MT 6- -MT12- -MT- MT 6-d MT12-d MT-d MT 6-d MT12-d MT-d M2 - M6 No.3 - U1/ M6 - M12 U1/ - U7/ P1/8 M12 - M U1/2 - U3/ P1/ - P3/8 M2 - M6 No.3 - U1/ M6 - M12 U1/ - U7/ P1/8 M12 - M U1/2 - U3/ P1/ - P3/ Tap older and wrench are ordered separately. 2. Coolant through flange is standard on all DV0 & odies. Rigid tapping function is required on the machine tool. For TAP ODER A 33-A 36 For MEA WRENC A Tapping Range for DIN & ISO Standard MT Size MT 6 MT12 MT DIN Standard ISO Standard DIN371 DIN376 DIN3 ISO529 ISO228 M3-M6 M5-M8 M10 M5-M8 M8-M12 M12-M18 1/8 1/-3/8 M3-M5 M6,M8,M12 M10-M 1/8 1/-3/8 For detail of TAP ODER A -A 36 10

12 S P I N D E S Y S T E M DUA CONTACT DIN A (I-PUS) 1 1 W DV No. 2 Fig. 1 1 DV / DV SANK DV No. Fig. 2 W 2 1 I-PUS tools can be used in machining centers with conventional spindles. Fig. Cutter Dia W DV0-FMC- - -FMC FMC FMC- - DV-FMC FMC FMC , 63, Clamp olt (Cap Screw) is included. 2. y utilizing a clamping bolt with a hole through, coolant is supplied through the bolt M 8 M10 M12 M M10 M12 M

13 DIN (I-PUS) S P I N D E S Y S T E M DUA CONTACT ANE EAD 1 ø97 2 K øe A NS type SPINDE ANE : It is the outstanding rigidity and accuracy of the NEW AY CUCK, used for holding the cutting tool, that produces high precision with less runout. Available in various sizes to meet specific production requirements. S=65 5 Pin Compression Fixed ength A Fig. 1 1 ø97 M 2 K Q P Min. access bore øf øe S=65 5 Pin Compression Fixed ength A M Q P Min. access bore øf R18 DV / DV SANK Fig. 2 1 ø1 ø97 2 K øe S=110 Q P Min. access bore øf Fig. 3 M 6 Collar Compression 3 Pin Compression Fixed ength A R21 I-PUS tools can be used in machining centers with conventional spindles. The rotation of the cutting tool is in reverse direction of the machine spindle.(speed Ratio 1:1) DV0-A/NS A/NS A/NS A/NSS-175S DV-A/NS A/NS A/NS A/NS -2 Fig. øe K 1 2 M P Q øf The shortest Fixed ength A: 0 taper = 8mm, taper = 6mm Other lengths are available upon request. 2. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to Clamping nut and wrench are included. Collet must be ordered separately.. New aby Collet for endmill model NC - EAA cannot be used Exclusive STOP OCK is required NC 6 Max. For NEW AY COET 3 For STOP OCK NC10 NC13 NC 6,000 6,000 3, NC 6 6, NC10 6, NC13 6, NC 3, Collet 6,000 12

14 S P I N D E S Y S T E M DUA CONTACT DIN (I-PUS) ANE EAD Spindle head is equipped with a short taper for quick changing of various adapters. A UID-UP type SPINDE ANE : [STANDARD TYPE] DV / DV SANK Designed for greater rigidity by having the face of the spindle bore in line with the center of the machine spindle. Also helps to minimize interference problems with ATC and storage problems within the magazine. S= ø1 ø38.1 age ine for A Adapters Collar Compression 10 2 Draw ar R21 3 Pin Compression Fixed ength A 97 3,000 Exclusive STOP OCK for ANE EAD is required. I-PUS tools can be used in machining centers with conventional spindles. The cutter rotates in the same direction of the machine spindle. DV-A/A The standard Fixed ength A is 6mm. Other lengths are available upon request. 2. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to 3. For STOP OCK [I RIIDITY TYPE] Provided with a steel housing and reinforced locating pin assembly for applications where increased rigidity is required to perform various types of heavier machining ø1 ø38.1 age ine for A Adapters 5 5 S= Collar Compression 3 Pin Compression Fixed ength A Draw ar R 21 3,000 Exclusive STOP OCK for ANE EAD is required. I-PUS tools can be used in machining centers with conventional spindles. The cutter rotates in the same direction of the machine spindle. 13 DV-A/A-2S.3 1. The standard Fixed ength A is 6mm. Other lengths are available upon request. 2. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to 3. S= type is available upon request. For STOP OCK

15 DIN (I-PUS) S P I N D E S Y S T E M DUA CONTACT UID-UP TYPE A ADAPTER SERIES øf= Minimum bore size that an A adapter can fit into, excluding the cutting tool. Min. Access ore øf øc NEW AY CUCK A-NS10 -NS13 -NS -NS Collet and wrench must be ordered separately. 7 5 øc 6 øf For NEW AY COET 3 DV / DV SANK For WRENC A 15 NEW I-POWER MIIN CUCK øc A-MCS Wrench(FK5-) is included. øc øf For STRAIT COET 15 F1 F2 Compression Tension (forward) F3 Tension (reverse) øc Tap Collet d AUTO TAPPER TYPE (Automatic depth control) A-AT12E -ATE For Tap Collets, please contact d M - M12 M8 - M agent. øc F1 F2 F FACE MI AROR A-FMA.- A-FM22 - -FM Cutter face protrudes by 7.5mm from the 1mm diameter housing with the following combinations; A-FMA.- + mm thick cutter, A-FM mm thick cutter A-FM27- + mm thick cutter MORSE TAPER ADAPTER MT. No. øc A-MT1 -MT MT.No. 1 2 øc 2 øf

16 S P I N D E S Y S T E M DUA CONTACT DIN (I-PUS) ANE EAD Improved versatility is achieved from the mm capacity Milling Chuck by using parallel reduction collets and other accessories. A MC type SPINDE ANE : [STANDARD TYPE] Designed for greater rigidity by having the face of the spindle bore in line with the center of the machine spindle. Also helps to minimize interference problems with ATC and storage problems within magazine. 2 5 ø ø ø1 5 5 DV / DV SANK 97 6 Collar Compression 3 Pin Compression Fixed ength A 3,000 R 21 Exclusive STOP OCK for ANE EAD is required. I-PUS tools can be used in machining centers with conventional spindles. The cutter rotates in the same direction of the machine spindle. [I RIIDITY TYPE] Provided with a steel housing and reinforced ocating Pin assembly for applications where increased rigidity is required to perform various types of heavier machining. DV-A/MC The standard Fixed ength A is 6mm. Other lengths are available upon request. 2. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to Wrench (FK-) is included. 2 5 ø ø ø1 For STOP OCK For STRAIT COET S= Min.Access ore ø175 S= Min.Access ore ø Collar Compression 3 Pin Compression Fixed ength A 3,000 R 21 Exclusive STOP OCK for ANE EAD is required. I-PUS tools can be used in machining centers with conventional spindles. The cutter rotates in the same direction of the machine spindle. DV-A/MC-2S The standard Fixed ength A is 6mm. Other lengths are available upon request. 2. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to Wrench (FK-) is included. For STRAIT COET 15 S= type is available upon request. For STOP OCK 15

17 DIN (I-PUS) S P I N D E S Y S T E M DUA CONTACT igh rigidity bearings and substantial spindle design. Max. power transmission Kw. (at 1,0 ) A FACE MI type SPINDE ANE : (ø) ø10 Clamp olt S=110 ø1 ø () 76.5 (117) 5 9. Min. bore for access ø6 DV / DV SANK 57 6 Collar Compression 3 Pin Compression Fixed ength A R21 Simple indexing of the cutter direction. (Accuracy 5 ) 1,0 I-PUS tools can be used in machining centers with conventional spindles. The rotation of the cutting tool is in reverse direction of the machine spindle. Exclusive STOP OCK for ANE EAD is required. DV-A-FMA.S-1S Figures in ( ) indicate dimensions when mm diameter and mm high face mill cutter is mounted. 1. The standard Fixed ength A is 6mm. Other lengths are available upon request. 2. Coolant cannot be supplied through the ocating Pin. 3. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to 3. For STOP OCK 19.2 Cutter head adjustable through 3 to any angle Following the release of the Adjusting olts (8 positions), the cutter direction can be easily adjusted. Indexing through Cutter head is quickly indexable to increments. (The Support Pin should be removed.) Adjusting olt Support Pin CAUTION : Indexing should not take place within the machine.

18 S P I N D E S Y S T E M DUA CONTACT DIN (I-PUS) ANE EAD Suitable for all cutting angles. In addition to the cutter head being adjustable a full 3, the spindle also becomes easily and precisely adjustable from 0 to by 1 increments. AU UNIVERSA type SPINDE ANE : 0 to 1 ø97(#0) ø1(#) 2 F DV / DV SANK S M 6 Collar Compression(# Only) 5(#0), 3(#) Pin Compression Fixed ength A øe C1 C2 I-PUS tools can be used in machining centers with conventional spindles. The rotation of the cutting tool is in reverse direction of the machine spindle. øe C1 C2 1 2 M F S DV0-AU/NS13-2 DV-AU/NS The standard fixed length A: 0 taper=8mm, taper=6mm. Other lengths are available upon request. 2. The angles of positioning pin to drive key groove and direction of cutting edge are adjustable from 0 to Clamping nut and wrench are included. Collet must be ordered separately. Exclusive STOP OCK is required. Collet Max NC13 6, NC,000.8 For NEW AY COET 3 For STOP OCK EASIY ADJUSTAE SPINDE ANE FROM 0 to. PRECISE ANE ADJUSTMENT Unique setting mechanism enables the spindle angle to be precisely set at 1 increments. EXCUSIVE CAMPIN OTS AND NUTS Specially selected materials and special design for clamping the head guarantee rigidity for even end milling applications. Application example Adjustable AU Universal Series expands Angle ead capabilities to accomplish various angular machining applications. Drilling or end milling on an angled surface Corner rounding Profiling Machining draft angle of a mold 17

19 DIN (I-PUS) S P I N D E S Y S T E M DUA CONTACT AIR TURINE SPINDE igh-speed Micro-Machining can be done on a normal machining center, eliminating the need of an expensive high-speed machine. Practical spindle speed ( ) Clamping Range T.I.R at nose Air pressure Air flow CENTER TROU Type,000 -,000 0,000 -,000 ø0.5 - ø.05mm (MEAS) ess than 1 m ess than 0.6MPa 0/min [ANR](0.5MPa) For compressed air through the machine spindle. For automatic tool change Machine Spindle Rotation=0,000 Relation between Spindle speed and air pressure (Reference),000,000,000 70,000 73,000 66,000,000 58,000,000 7,000,000 0,000 3,000 38,000, Air pressure (MPa) Revolution( ) Air DV No. K 22 1 Max.ø ø12 MEAS DV / DV SANK I-PUS tools can be used in machining centers with conventional spindles. Operating spindle speed( ) DV0-RX7C-S-1,000 -,000 -RX5C-S-1 0,000 -,000 DV-RX7C-S-15,000 -,000 -RX5C-S-15 0,000 -, Nut and wrench are included. Collet must be ordered separately. 2. XF1(Air Unit) must be ordered separately. A 65 For MICRO COET 2 Tool diameter ø1.0 or smaller ø1.5 or smaller ø1.0 or smaller ø1.5 or smaller CAUTION K Compressed air to drive the AIR TURINE SPINDE must be clean. Therefore, coolant should not be supplied through the spindle on the machine that the AIR TURINE SPINDE is used. SIDE TROU Type DV No. K1 22 Max.ø ø12 Drive key =0-3 MEAS S For automatic tool change Air Pin stroke : 6 I-PUS tools can be used in machining centers with conventional spindles. K2 Exclusive STOP OCK is required. DV0-RX7-S--65 -RX5-S--65 DV-RX7-S RX5-S-170- Operating spindle speed( ),000 -,000 0,000 -,000,000 -,000 0,000 -, Nut and wrench are included. Collet must be ordered separately. 2. XF1(Air Unit) must be ordered separately. A 65 Tool diameter ø1.0 or smaller ø1.5 or smaller ø1.0 or smaller ø1.5 or smaller K K S For MICRO COET 2 for AIR TURINE SPINDE Preparing the Stop lock The AIR TURINE SPINDE utilizing a ocating Pin requires the Stop lock, which is mounted to the machine spindle. Please contact a agent for details. ocating Pin 18

20 S P I N D E S Y S T E M DUA CONTACT DIN (I-PUS) I SPINDE T Type igher spindle speeds are available without excessive load on the machine spindle.,000 DV No. K D DV / DV SANK S COOANT ø18 Fixed ength I-PUS tools can be used in machining centers with conventional spindles. DV0-T DV-T T K1 S Collet The standard Fixed ength is 6mm pce. of maximum size collet (T5,6=NC10-10AA,T=NC-AA), clamping nut and wrench are included. 3. (angle of locating pin to drive key groove) is adjustable to any degree from 0 to 3.. Special Air Purge oil mist lubrication style is available upon request for machining graphite, ceramic, tungsten and other composite materials. 5. Please do not use with neat oil coolant. Using with neat oil coolant carries a risk of fire NC10 NC10 NC Exclusive STOP OCK is required. Speed Ratio Max.,000, For NEW AY COET 3 For STOP OCK 27 For OCATIN PINS 27 For WRENC A 15 TX Type Special design for die & mold. ong nose design for minimized interference. ong tool life with grease nipple. DV No. K1 5.5 D 0.01 S ø ø ø 1 2 2,000 Speed Ratio : 5.67 COOANT Fixed ength Exclusive STOP OCK is required. I-PUS tools can be used in machining centers with conventional spindles. K1 S Collet DV-TX NC The standard Fixed ength is 6mm. 2. Clamping nut and wrench are included. 3. Collet must be ordered separately.. Please do not use with neat oil coolant. Using with neat oil coolant carries a risk of fire. For NEW AY COET 3 For STOP OCK 27 For OCATIN PINS 27 For WRENC A 15 19

21 DIN i-jet ODER NEW AY CUCK Type Suitable for small diameter drills, gun drills and end mills due to high precision New aby Chuck. DV No. 1 øc2 øc1 S Fixed ength aby Perfect Seal (optional) DV / DV SANK DV0-ONS13N- ONSN- -ONSN- DV-ONS13N- ONSN- -ONSN- øc1 øc2 S The standard Fixed ength is 6mm. 2. Wrench, Collet and Adjusting Screw are optional items. 3. Max. coolant pressure is 2MPa.. Clamping Nut is sold separately. Please order AY PERFECT SEA(PS) for your application. Please do not use with neat oil coolant. Using with neat oil coolant carries a risk of fire Collet NC13 NC NC NC13 NC NC MERIT SET Merit Set includes 2 pcs. each of Merit Plates, Merit Rings, O-Rings and ocking Pads. Exclusive STOP OCK is required. Max. Merit Set 2 pcs. of Merit Ring and 2 pcs. of Merit Plate 10,000 8,000 8,000 8,000 MES-0 MES- MES- Merit Ring (2 pcs.) Merit Plate (2 pcs.) For STOP OCK 27 For OCATIN PINS 27 Accessories WRENC NC COET 3 FOR ENDMI COET 7 AY PERFECT SEA 10 NK13 NK NK NC13- NC- NC- PS13- PS- PS- ADJUSTIN SCREW NA13 NA NA Rubber M1 M18 M21

22 DIN i-jet ODER SIDE OCK Type Suitable for popular straight shanks with flat. DV No. øc2 øc1 S DV / DV SANK øc1 øc2 S DV0-OSN-1 -OSN-1 -OSN- -OSN- DV-OSN-1 -OSN-1 -OSN- -OSN- -OS0N- For STOP OCK For OCATIN PINS OSN The standard Fixed ength is 6mm. 2. Max. coolant pressure is 2MPa. Please do not use with neat oil coolant. Using with neat oil coolant carries a risk of fire MERIT SET Merit Set includes 2 pcs. each of Merit Plates, Merit Rings, O-Rings and ocking Pads. Fixed ength Exclusive STOP OCK is required. Max. Merit Set 2 pcs. of Merit Ring and 2 pcs. of Merit Plate. 8,000 6,000 8,000 6,000,000 MES- MES-65 MES- MES-65 MES Merit Ring (2 pcs.) Merit Plate (2 pcs.) REDUCTION COET OS- - OS OS Precision test bar of the highest quality. Periodic inspection of machine tools to control production stability. Shorter models are ideal for measuring ATC repeatability. I-PUS tools can be used in machining centers with conventional spindles. Effective test length A A DV0--0SD SD DV--0SD SD

Milling Chuck Features

Milling Chuck Features Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings

More information

About Us HAAS Tooling for CNC Turning Centers

About Us HAAS Tooling for CNC Turning Centers About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.

More information

Driven Toolholders for SAUTER Turrets

Driven Toolholders for SAUTER Turrets Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets

More information

YUASA MILLING MACHINE ACCESSORIES & TOOLS

YUASA MILLING MACHINE ACCESSORIES & TOOLS 97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage

More information

Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö

Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors

More information

Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö

Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due

More information

L I V E T O O L F O R O K U M A

L I V E T O O L F O R O K U M A L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,

More information

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013 STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME

More information

MEASURING TOOLS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOOL MASTER ACCU CENTER. ALIGNMENT TOOL for ATC arm DYNA FORCE

MEASURING TOOLS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOOL MASTER ACCU CENTER. ALIGNMENT TOOL for ATC arm DYNA FORCE MEASURING TOOS POINT MASTER PRO PMP POINT MASTER PMC POINT CENTER BASE MASTER SERIES TOO MASTER ACCU CENTER AIGNMENT TOO for ATC arm DYNA FORCE TOO PRESETTER type TPS EVE MASTER 3 3 4 5 5 6 7 8 9 MEASURING

More information

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing

More information

Static and Driven Tools LB and LT Series

Static and Driven Tools LB and LT Series Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide

More information

TOOL CLAMPING SYSTEMS

TOOL CLAMPING SYSTEMS TOOL CLAMPING SYSTEMS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths

More information

Phone (800) 821-8010 Fax (330) 920-0972 e-mail sales@pdq-marlin.com

Phone (800) 821-8010 Fax (330) 920-0972 e-mail sales@pdq-marlin.com 1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine Holders...7

More information

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.

Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. 1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).

More information

UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS

UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars

More information

TRIMMING UNIT/DIAMOND MACHINE TST.13

TRIMMING UNIT/DIAMOND MACHINE TST.13 TRIMMING UNIT/DIAMOND MACHINE TST.13 REFERENCE BOOK rel. 02.15 TRIMMING UNIT/DIAMOND MACHINE TST.13 REL. 02.15 ENGLISH LANGUAGE 1 MACHINE DESCRIPTION TST.13 was designed and built for processing methacrylate.

More information

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400

More information

KOMET. Adaptors Perfecting the Connection. With our comprehension programme of tool adaptors we have the right answer for every requirement.

KOMET. Adaptors Perfecting the Connection. With our comprehension programme of tool adaptors we have the right answer for every requirement. KOMET Adaptors Perfecting the Connection With our comprehension programme of tool s we have the right answer for every requirement. Adaptors with connections specified by manufacturers available on request.

More information

VDI Tool Holders. for Hardinge Machines. In USA, call: 800-843-8801 In Canada, call: 800-468-5946 Other, call: 607-734-2281 Fax: 607-734-8819

VDI Tool Holders. for Hardinge Machines. In USA, call: 800-843-8801 In Canada, call: 800-468-5946 Other, call: 607-734-2281 Fax: 607-734-8819 VI ool Holders for Hardinge Machines QUES 6/42, 8/51 and 10/65 CNC athes EIE 8/51 CNC athes HARINGE-EMAG V3/V5 Vertical CNC athes QUES WINURN 65 CNC urning Centers In USA, call: 800-843-8801 In Canada,

More information

Advantages and application of PCD and CBn tools

Advantages and application of PCD and CBn tools PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.

More information

Mandrel system MIS. www.microcentric.de

Mandrel system MIS. www.microcentric.de Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

CAD 302.02.10.1 SK 30 1 10 (ER 16) 100 32 302.02.16.1 SK 30 2 16 (ER 25) 100 42 302.02.20.1 SK 30 2 20 (ER 32) 100 50

CAD 302.02.10.1 SK 30 1 10 (ER 16) 100 32 302.02.16.1 SK 30 2 16 (ER 25) 100 42 302.02.20.1 SK 30 2 20 (ER 32) 100 50 Spannfutter für Spannzangen DIN 6499 (ISO 15488) System ER Collet chucks for collets DIN 6499 (ISO 15488) ER-system Mandrins à pinces pour pinces DIN 6499 (ISO 15488) système ER Verwendung: Zur Aufnahme

More information

Milling and Machining Center Basics

Milling and Machining Center Basics Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier

More information

Chapter 6 Machining Center Carbide Insert Fundamentals

Chapter 6 Machining Center Carbide Insert Fundamentals This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5

More information

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy

More information

Ultra Live Center RN. Clamping tools for clamping on machine tools. NEIDLEIN revolving ultra live centers type RN ensure: Type RN with morse taper

Ultra Live Center RN. Clamping tools for clamping on machine tools. NEIDLEIN revolving ultra live centers type RN ensure: Type RN with morse taper Ultra Live Center RN Type RN with morse taper NEIDLEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the application of bearing and the stable

More information

8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles

8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles 8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles A. Schubert 1, O. Harpaz 2, B. Books 2, U. Eckert 1, R. Wertheim 1 1 Fraunhofer IWU, Reichenhainer Str. 88,

More information

GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING

GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING AND lubrication Check- and Measuring instruments for optimal tool clamping and lubrication Pre-requisite for perfect machining results

More information

SAMSUNG Machine Tools PL60 CNC TURNING CENTER

SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG Machine Tools PL60 CNC TURNING CENTER SAMSUNG'S Advanced Engineering and Machine Design Cast iron structure for superior dampening characteristics and thermal displacement Rigid 45 degree slant

More information

Machine Screws, Dowel Pins and Hardware

Machine Screws, Dowel Pins and Hardware Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-

More information

Manual HSK clamping technology

Manual HSK clamping technology Manual HSK clamping technology Simplicity, precision and speed as well as flexibility, safety and cost-effectiveness these are the demands placed on systems in modern production technology. The MAPAL HSK

More information

BSME Series SEXC Series

BSME Series SEXC Series TOOLING NEWS E-124 P M K N S H CBN Small Hole Boring Bar Systems BSME Series SEXC Series BSME SEXC Series with brazed CBN cutting edge Minimum bore diameter = 2,5mm Series with indexable CBN insert Minimum

More information

UBM-W SERIES CNC HORIZONTAL BORING & MILLING MACHINE. http://www.uchine.com.tw. CNC Double Column Machining Center UDM series

UBM-W SERIES CNC HORIZONTAL BORING & MILLING MACHINE. http://www.uchine.com.tw. CNC Double Column Machining Center UDM series CNC Double Column Machining Center UDM series CNC Horizontal Heavy Duty Milling Machine UMM series CNC Horizontal Machining Center UHM series Conventional Horizontal Boring & Milling Machine UBM series

More information

Milling & Machining Centers

Milling & Machining Centers Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will

More information

Operating Instructions

Operating Instructions Operating Instructions Sauter Tooling for more information, please consult www., and for the complete standard tooling programme, please visit www.sauter-tools.com Sauter: The world turns with us! Table

More information

Resharpening Companion

Resharpening Companion Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace

More information

Contents. VDI system. BMT system. 1. Driven Coupling Type DIN 1809 DIN 5480 DIN 5482 HAAS SPUR MT TOEM (BARUFFALDI) 1809 5480 MORI SEIKI

Contents. VDI system. BMT system. 1. Driven Coupling Type DIN 1809 DIN 5480 DIN 5482 HAAS SPUR MT TOEM (BARUFFALDI) 1809 5480 MORI SEIKI ISO 9001:2008 Contents 1. Driven Coupling Type VDI system DIN 1809 DIN 5480 DIN 5482 SPUR MT TOEM (BARUFFALDI) HAAS BMT system 1809 5480 MORI SEIKI 2. Turret Type Radial Turret Axial Turret 3. Driven Tool

More information

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT

POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric

More information

Product Guide SaraDrill

Product Guide SaraDrill Product Guide SaraDrill SARADRILL / A QUICK GUIDE Drilling from solid - a proven technology to drill large diameter holes on low horse power machines. Drilling from 49mm to 270mm diameter holes from solid

More information

TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS

TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS www.danly.com TRUSTED SOLUTIONS AND INNOVATION CATALOG DIE SETS Quality & performance Quick delivery Precision Components www.danly.com CATALOG DIE SETS Service We Deliver and Quality You Can Depend On

More information

RAPID DIAL TEST INDICATORS

RAPID DIAL TEST INDICATORS RAPID DIAL TEST INDICATORS The Verdict Rapid presents the dial face inclined to the workpiece surface ensuring good visual accessibility obviating parallax error. Rapids incorporate a rear swivel spigot

More information

SC-32 CNC LATHE OPERATION MANUAL

SC-32 CNC LATHE OPERATION MANUAL SC-32 OPERATION MANUAL NCT Ipari Elektronikai Kft. 1 / 29 Dátum: 2013.09.27. CONTENTS 1. ACCURACY RECORD... 2 2. SAFETY PRECAUTIONS... 2 2.1. Safety Rules... 2 2.2. Warning label attaching positions...

More information

Machining Center Equipped with Unparalleled Rigidity and Agility NHX6300

Machining Center Equipped with Unparalleled Rigidity and Agility NHX6300 Press Release Mori Seiki Co., Ltd. Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1830 FAX: +81(0)52-587-1833 January 24, 2013 Machining Center Equipped with Unparalleled

More information

HOBBING MACHINE TYPE ZFWZ 8000x40

HOBBING MACHINE TYPE ZFWZ 8000x40 Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth

More information

kymanual or Automatic - it s your Choice

kymanual or Automatic - it s your Choice . kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.

More information

MaraMeter. Indicating Snap Gages

MaraMeter. Indicating Snap Gages - 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F

More information

Overview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop

Overview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common

More information

Providing Answers For All Your Machine Tool Needs

Providing Answers For All Your Machine Tool Needs Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION

More information

Machine devices, jig devices

Machine devices, jig devices Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class

More information

413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX

413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX 413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:

More information

Self-aligning ball bearings

Self-aligning ball bearings Self-aligning ball bearings Designs... 470 Basic design... 470 Sealed bearings... 470 Bearings with an extended inner ring... 472 Bearings on sleeves... 473 Self-aligning ball bearing kits... 474 Appropriate

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

Introduction to JIGS AND FIXTURES

Introduction to JIGS AND FIXTURES Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production

More information

Profile rail guides LLR

Profile rail guides LLR Profile rail guides LLR Content The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as the hallmark of quality bearings throughout

More information

Machining Spindles for belt drive and direct driven 25060310 Catalog 25060310 Index Spindle specification 4-6 TSA - External taper style 7 TSI - Internal taper style 8 TSP - Cylindric pilot with face clamping

More information

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors

Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical

More information

PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING

PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING SECO PROVEN SOLUTIONS WILL IMPROVE YOUR PROCESS When you partner with Seco, our team of metalworking experts evaluate

More information

HORIZONTAL INSTALLATION

HORIZONTAL INSTALLATION THERMO/SOLAR Žiar s.r.o. MANUAL FOR INSTALLATION PV SUPPORTING FRAMES HORIZONTAL INSTALLATION Technical alternation reserved A1410 1 12/2014 CONTENT ORD.NO. PAGE Mounting information 3 Mounting, flat roof

More information

TL-Series Sub-Spindle Operator s Addendum

TL-Series Sub-Spindle Operator s Addendum 3 4 5 11 9 TL-Series Sub-Spindle Operator s Addendum 2 1 12 10 6 7 8 20HP VECTOR DUAL DRIVE LIVE TOOLING SUB SPINDLE 2008 Haas Automation, Inc. 96-0037 rev L 9/08 1 1. Introduction Specific M codes are

More information

Up to Speed. When considering a modern CNC. Spindle speeders allow micromachining on lower-rpm machines

Up to Speed. When considering a modern CNC. Spindle speeders allow micromachining on lower-rpm machines Up to Speed Spindle speeders allow micromachining on lower-rpm machines By Gerard Vacio, BIG Kaiser Precision Tooling Inc. As cutting tool manufacturers increase the recommended operating conditions for

More information

3000, 4000, 4100, 7500, 7700

3000, 4000, 4100, 7500, 7700 3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the

More information

The Speed of Live and the Accuracy of Fixed

The Speed of Live and the Accuracy of Fixed The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.

More information

FAG Hydraulic nuts. Technical Product Information

FAG Hydraulic nuts. Technical Product Information FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables

More information

So You Want to Think Lean? Jürgen Hilbinger and Martin Schreiber

So You Want to Think Lean? Jürgen Hilbinger and Martin Schreiber So You Want to Think Lean? Jürgen Hilbinger and Martin Schreiber INA reprint November 2000 So You Want to Think Lean? New High-Precision Bearing Unit for Cost-Effective Ball Screw Supports in the Small

More information

ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW

ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the

More information

Weeke CNC Machining Center, Model BP-150 Optimat

Weeke CNC Machining Center, Model BP-150 Optimat Weeke CNC Machining Center, Model BP-150 Optimat Weeke's BP-150 is a truly industrial machine designed primarily for point-topoint boring and machining of flat components without special workpiece fixtures.

More information

PRS X-axis E-chain installation: For tools with a 12 Z-Axis

PRS X-axis E-chain installation: For tools with a 12 Z-Axis PRS X-axis Energy Chain (Echain) Installation Page -1- PRS X-axis E-chain installation: For tools with a 12 Z-Axis This kit is compatible with PRS Shopbots that have an X-axis cutting area of 96 to 144.

More information

Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw

Home > ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche

More information

CNC Vertical Machining Center V-Mill CNC Large box-way and linear guide way machines

CNC Vertical Machining Center V-Mill CNC Large box-way and linear guide way machines CNC Vertical Machining Center Large box-way and linear guide way machines Technical Datasheet CNC Vertical Machining Center Large box-way and linear guide way machines Spindle gear drive (50-taper) for

More information

Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center

Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale

More information

4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580

4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580 PRECISION LIVE TOOLING & MACHINE TOOL ACCESSORIES MADE IN THE USA 4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580 Patent Pending Live Tooling Planet Products Corporation

More information

TUBE-AUGER Tube End Prep Machine Kit For ¾ 3 Tube ID (EP443010)

TUBE-AUGER Tube End Prep Machine Kit For ¾ 3 Tube ID (EP443010) TM-33 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque controls

More information

zeus Marking Technology

zeus Marking Technology zeus Marking Technology Marking Tools Marking Rolls Engraving Technology Die Premium-Marke von Hommel+Keller zeus MARKING TECHNOLOGY zeus is a premium brand that stands for highest quality, precision,

More information

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices 04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust

More information

Alfra Rotabest 100 Metal Core Drilling Machine. Operation Manual

Alfra Rotabest 100 Metal Core Drilling Machine. Operation Manual Alfra Rotabest 100 Metal Core Drilling Machine Operation Manual 06/2005 1. Technical Data Prod. No.: 18630 Name : Rotabest 100 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant

More information

The Bonelle Tool and Cutter Grinder

The Bonelle Tool and Cutter Grinder The Bonelle Tool and Cutter Grinder The grinder was constructed about 1987 and exhibited at the 89th Model Engineering exhibition where it was awarded a bronze medal (see ME Vol164 No 3868 page 273). Subsequently

More information

Lathe Milling Attachment

Lathe Milling Attachment Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,

More information

Technical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54

Technical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54 Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This

More information

TA-A BED TYPE MILLING CENTRE

TA-A BED TYPE MILLING CENTRE TA-A BED TYPE MILLING CENTRE TA-A BED TYPE MILLING CENTRE MILLING CENTRE HIGH CAPACITY IN A COMPACT MACHINE High stock removal capacity TA-A BED TYPE MILLING CENTRE 2 TA-A The TA-A milling centre is a

More information

Number Wheeler P/N Description Set Rex P/N Notes

Number Wheeler P/N Description Set Rex P/N Notes 1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056

More information

HIGH SPEED SPINDLE MOTORS

HIGH SPEED SPINDLE MOTORS DATA SHEET HM / HT and ES Ranges HIGH SPEED SPINDLE MOTORS Manual and Automatic Tool Change Compact, high speed, asynchronous motors with power ratings from 0.65 to 18 designed to provide long term reliability

More information

BRAKE DRUM AND ROTOR SERVICE INFORMATION

BRAKE DRUM AND ROTOR SERVICE INFORMATION SERVICE INFORMATION To achieve maximum drum life and optimum performance, proper brake maintenance and brake balance are essential. Consult your truck or trailer manufacturer s maintenance manual for proper

More information

Rebuild Instructions for 70001 and 70010 Transmission

Rebuild Instructions for 70001 and 70010 Transmission Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before

More information

Model Marine Engine Requires No Castings

Model Marine Engine Requires No Castings Model Marine Engine Requires No Castings EXHAUST PORTS No. 29 No. 31 CROSSHEAD-GUIDE BRACKET No. 29 (STEAM PORT) CYLINDER BLOCK R CYLINDER COVERS No.31 CYLINDER SUPPORT No.29 (STEAM PORT) VALVE LINER VENT,

More information

Flexible High Tech Solutions for Industry

Flexible High Tech Solutions for Industry Flexible High Tech Solutions f Industry Those who look a little harder discover a lot me Machine Tools EN Customized Efficiency Machine Tools EAGLE 1/2T K //45/8/15 EAGLE 15/2T K //45/8/15 EAGLE /2T K

More information

Atling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests

Atling proudly presents the next generation self centering steady rests ATLING. Ockelbo Sweden. AX Steady Rests Atling proudly presents the next generation self centering steady rests ATLING Ockelbo Sweden AX Steady Rests 1 The New AX Steady Rest The Atling AX series is the result of several years of development

More information

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE

NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY

More information

Trouble shooting guide

Trouble shooting guide guide DPR/PSR Leak Insuffi ciently tightened, shallow bite Tighten the nut according to correct number of turns, direct assembly only for maintanance/repair, use of recommended pre-assembly machines Mark

More information

ACCESSORIES FOR TURNING

ACCESSORIES FOR TURNING ACCESSORIES FOR TURNING Accessories for turning D140 D180 D210 D240 D250 D280 D320 D330 D360 D420 D460 D560 Plane clamping disk Ø 170 mm 344 0295 Plane clamping disk Ø 200 mm 344 0352 Plane clamping disk

More information

Roller Chain Coupling

Roller Chain Coupling Roller Chain Coupling Features 1. Simple structure A roller chain coupling consists of one duplex roller chain and two sprockets for a simplex chain. Handling is very simple as both the shafts (driving

More information

cost-effective automation

cost-effective automation cost-effective automation compact units for drilling tapping milling www.esystems.com AIR HYDRAULIC DRILLING UNIT BE(F) AND BE(FP) AIR HYDRAULIC DRILLING UNIT BE(F) The basic design of the BE(F) consists

More information

indexable Center Drill

indexable Center Drill Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining

More information

Drive shaft, servicing

Drive shaft, servicing Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,

More information

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining

[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining [ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation

More information

Milling Milling milling cutter milling machines 1

Milling Milling milling cutter milling machines 1 Milling Milling is a basic machining process by which a surface is generated progressively by the removal of chips from a workpiece as it is fed to a rotating cutter in a direction perpendicular to the

More information

Cerobear Spindle Bearings for Machine Tool Applications

Cerobear Spindle Bearings for Machine Tool Applications Cerobear Spindle Bearings for Machine Tool Applications Cerobear Spindle Bearings About CEROBEAR Committed to the abbreviation CEramic in ROlling BEARings, CEROBEAR GmbH is the renowned world leader in

More information