PRODUCT BROCHURE. NCT KFT BUDAPEST, FOGARASI ÚT 7. TAXREGISTER: , TRADEREGISTER:

Transcription

1 Subejct: NCT KFT BUDAPEST, FOGARASI ÚT 7. TAXREGISTER: , TRADEREGISTER: , EU. TAXREGISTER: HU , TEL , FAX TOPPER-NCT TNL-100AL, -120AL and -130A type CNC lathes page 1 NCT Nr.: Made: Parity: Warranty:: All datas are subject to change! EX Works, on-site installation, set-up It is defined in the item #110 of the Quotation. Payment: As per agreement! Payment currency: HUF or EURO Rate of exchange: HUF/EUR Financing: self-financing, instalment payment, leasing etc Remarks for Quotation: TOPPER-NCT TNL-100AL, -120AL -130A type CNC Lathes Features CONSTRUCTION: - Slanted bed, high-speed CNC Lathe - Assembled rolling guideway inx and Z directions - Ground, double nut ball screws - Oil lubricated slide system and ball screws - Headstock with sustained grease lubrication - Torque limiting coupling on Z axis - Fully enclosed guard, CE conformity CONTROL AND ELECTRONICS: - NCT 201 control for lathe with 19" monitor - Built-in control panel - Handwheel built in the operator's panel - Digital AC synchronous servo system - AC asynchronous main drive - Braking with recuperation to the mains - Control box cooled by heat exchanger - Menu and documentation in English SPECIFICATIONS: Working area: - Max. swing over bed / cross slide (mm): 420 / Distance between centres (mm): Recommended chuck diameter (mm): 200 (TNL-100AL), 250 (TNL A) - Distance between the spindle centre-line and the door surface (mm): 500 Saddles: - X / Z axis stroke (mm): 170 / X / Z axis rapid travel (m/ min): 24 / 30 - X / Z axis ball screw size (mm): 32 P10 / 32 P12 - X / Z axis servo motor power (kw): 2.1 / 3.4 Tailstock: - Operation / travel / diameter of the quill (mm): hydraulic / 100 / 75 - Quill inner taper: MT5 - Positioning / moving / travel of the tailstock (mm): manual / manual / 500 Coolant system: - Tank capacity (litre): 140

2 Cont., page 2 - Power / pressure of the pump (kw / bar): 0.18 / 0.8* Installation: - Floor space (+ motor + chip conveyor) height (mm): 2500 ( ) Net machine weight (kg): Electric supply: VAC STANDARD ACCESSORIES: - Foot lever to operate power-actuated chuch or collet chuck - Hydraulic tailstock with a live centre set - Hydraulic pump with oil cooler, chuck clamping and tailstock actuating system - Complete coolant system, chip deflector - Chain type chip conveyor and chip trolley - Levelling bolts and pads - Machine and alarm light - Water gun actuated by coolant pump TNL-100AL CNC type lathe basic price and individual technical parameters: MAIN SPINDLE: - Spindle nose: A2-6 - Max. speed (RPM): Inner diameter / max. bar capacity (mm): 62 / 51 - Continuous / Max. torque (Nm):... /... - Main motor continuous / max. power (kw): 20 / TNL-120AL type CNC lathe basic price and individual technical parameters: MAIN SPINDLE: - Spindle nose: A2-8 - Recommended chuck diameter (mm): Max. speed (RPM): Inner diameter / Max. bar capacity (mm): 76 / 64 - Continuous / max. torque (Nm):... /... - Main motor continuous / max. power (kw): 20 / TNL-130A type CNC lathe basic price and individual technical parameters: MAIN SPINDLE: - Spindle nose: A2-8 - Recommended chuck diameter (mm): Max. speed (RPM): Inner diameter / Max. bar capacity (mm): 86 / 75 - Continuous / max. torque (Nm):... /... - Main motor continuous / max. power (kw): 20 / MACHINE STANDARD AND OPTIONAL ACCESSORIES Motorspindle (52mm) extra charge (TNL-100ALMs type) Extra charge of the basic price of the TNL-100AL type - Spindle driven by: Motorspindle - Recomended chuck diameter (mm): 8" / Spindle nose: A2-6 - Spindle inner diameter/ Bar capacity (mm): 62 / 52 - Main motor rated / max. power (kw): 22 / 35 - Max. spindle speed for chuck / collet chuck (RPM): 4900 / Headstock cooled by: Digital oil cooler - Measuring system: direct, Heidenhain angle encoder (in case of C axis, enhanced accuracy is included in basic price)

3 Cont., page Motorspindle (75mm) extra charge (TNL 130AMs type) Extra charge of the basic price of the TNL-100AL type - Spindle driven by: Motorspindle - Recomended chuck diameter (mm): Spindle nose: A2-8 - Spindle inner diameter/ Bar capacity (mm): 90 / 75 - Main motor rated / max. power (kw): 35 / 53 - Max. spindle speed for chuck / collet chuck (RPM): 4300 / Headstock cooled by: Digital oil cooler - Measuring system: direct, Heidenhain angle encoder (in case of C axis, enhanced accuracy is included in basic price) Increased spindle torque resulting from modification of the ratio of spindle to motor (TNL-100A -130A type) al version: Increased spindle torque, gearbox at motor side (TNL, JCL and MCB type) Turret with "JAPANESE" / 12 tools (TNL-100AL, -120AL & -130A type): - Positions of tools: 12 - Max turning diameter (mm): Hydraulically operated - Tool changing time (sec/180 ): 1.9 ACCESSORIES: - 2 pcs of external tool holder: for prismatic blade (25x25) - 6 pcs of tool clamp insert pair (for prismatic blade 25x25) - 4 pcs of holder for drills and boring tool (with bore diameter of 32 mm) - 5 pcs of reducing sleeves for clamping boring tools: with bore diameter of 25, 20, 16, 12, 10 mm - 3 pcs of drill clamping sleeves: MT1, MT2, MT3 (for Morse taper drills) Turret with VDI-40/2/12 tooling (TNL-100AL, -120AL and -130A type) - Hole circle diameter (mm): 340 / Tooling type / number of hole circles / tool positions: VDI40 / 2 / 12 - Max. turning diameter (mm):... - Overtravel of the turret working position on the spindle axis: min. 20 mm - Hydraulically operated - Tool changing time (sec/180 ): 1.9 Standard accessories: cover pocket lengthening radial tool overhang Toolholder is not an accessory! TBMA-200 driven VDI40/1/12 turret & servo C axis (TNL-100ALDT,-130ADT ) TECHNOLOGICAL DATA: - Positioning spindle and holding it in position - Axial and radial drilling, tapping and milling - C- axis interpolation (interpolation in cylindrical and polar coordinates) - Rigid tapping - Finding tool in two directions, always in the shortest way - Revolving the turret with contimuous speed - Constant coolant pressure of 3 bar and cooling through the tool - Extended tool length making "pocket" at the back side cover - The turning diameter can be enlarged using two hole circle (star-like) turret disk! There is no extra charge, however the number of live tool posts will decrease to 6. SPECIFICATION: - Max. turning diameter using outer / inner cutting tool (mm): 180 / Number of live tool posts: 12 - Type of tooling / number of hole circles / toolposts: VDI40 / 1/ 12

4 Cont., page 4 - Max. speed of live tools (RPM): Continuous / max. power of the driving motor (kw): 4 / Type of coupling driving the tools: TOEM Overtravel of the turret working position on the spindle axis: min. 20 mm - Spindle positioning resolution / accuracy: / +/ Manufacturer and type of the turret: BARUFFALDI TBMA Tool changing speed (sec/180 ): Hole circle diameter (mm): 340 ATTENTION! The basic price includes 6 pcs of lock caps. The hydraulic spindle brake and tool holder are not accessories! HEIMATEC (a German manufacturer) tool holders can be ordered separately! Extra charge for turret disc VDI40/2/12 with two hole circles, for TBMA-200 type turret (TNL-100ALDT -130ADT type): Extra supply package for one spindle, live tooling TBMA type turret Increased live tool tourqe fortbma-200 turret Extra charge of TBMA-160 driven VDI30/1/12 turret (TNL-100AL type) Its features are the same as those of TBMA-200 VDI40 type, extra charge for it (degree of price reduction) has been defined compared to this. Differences: -Max. turning diameter (mm):.../... - Manufacturer and type: BARUFFALDI TBMA Tool changing speed (sec/180 ): Type of tooling / number of hole circles / tool posts: VDI30 / 1 / 12 - Hole circle diameter (mm): Number of posts for live tools: 12 - Max. speed of live tools (RPM): Continuous / max. power of driving motor (kw): 2.2 / Extra charge for turret disc VDI30/2/12 with two hole circles, for TBMA-160 type (TNL-85ADT -100ADT type) Increased Extra charge for turret disc VDI30/1/16 (for TNL-100AL - 130A type): Hydraulic spindle brake (for TNL and LT type) Enhanced C axis positioning accuracy with direct measuring system (TNL, TA and TB type) Power-actuated, d=200mm / 8" /A2-6, 3-jaw chuck (TON-FOU) Increased chuck size, 10" 3-jaws chuck (TNL-100A and -AL type):

5 34 Cont., page Power-actuated, d=250mm / 10"/ 75 /A2-8, 3-jaw chuck (TON-FOU) Increased chuck size, 12" 3 -jaws chuck (TNL-130A and -130AL type) Power-actuated collet chuck (A2-6/173E): Power-actuated collet chuck (A2-6/185E): Power-actuated collet chuck (A2-8/185E) Power-operated collet chuck (A2-8/193E): Part catcher and conveyor (for TNL type) Tool measuring probe (TNL,TA and TB type): Foot lever to operate the tailstock Extra charge for program-controlled coolant pressure increased from 3 bar to 6 bar, for VDI tooling: Extra charge for program-controlled cooling water pressure increased up to 20 bar, for TBMA turrets Preparation of BF type barfeeder for connection: Pneumatic bar feeder, 1.2 m (BF-1200 type): Pneumatic bar feeder, 1.5 m (BF-1500 type): Servo-actuated bar feeder, 1.2 m (BS-65 type): Servo-actuated bar feeder, 1.5 m (BS-65L type):

6 51 Cont., page Bar guide for BF and BS-1500 type barfeeder with bar diameter capacity of 51 mm (SUPPORTER) Bar guide for BF-1500 type barfeeder with bar diameter capacity of 64 mm (SUPPORTER) Bar guide for BF-1500 type barfeeder with bar diameter capacity of 74 mm (SUPPORTER) al version: Fitting bar guides, bar feeders and row material feeders by special requirements Extra charge for Scraper type chip conveyor (TNL A, TGL type): HEIMATEC VDI40/180 /KH/TOEM200/ER32 tool holder for drilling and milling (ON.: ) HEIMATEC VDI40/90 /KH/TOEM200/AX-R/ER32 tool holder for drilling and milling (ON.: ) Wrench set for HEIMATEC/180 /ER32 collet (ON.: ) Wrench set for HEIMATEC ER32 collet (ON.: ) : HEIMATEC static and live tool holders from NCT: : HEIMATEC special axial and radial live tool holders : : Special control devices for CNC lathes: N-2430E Cast-bodied oil skimmer with strip Extra charge for water gun for lathes (push-button) Automatic opening and closing the door (TNL) Working space light outside the splashguard (lathe):

7 CONTROLS STANDARD AND OPTIONAL ACCESSORES Cont., page NCT 201 CNC lathe control: Price-cutting item / NCT 201/15" type control: Extra charge for swing-asidecontrol panel for NCT201/15" or -19" control HW EXT external handwheel: mynct software for NCT 201 lathe control Spindle and axes acceleration-deceleration on bell shaped curve (NCT 201 type): SMART chuck management function, for CNC lathe: al version: Machine supervision and energy management for CNC milling machines (ESIS-SW201-OP06): colour signal lamp for machine tools: Indication of machine status via SMS message: Turning off the machine from technological program: Free contact switchable from program using four M codes External unit with buttons of cycle start-stop and two buttons of free application, for milling machine: al version: Enhanced and sustained accuracy using HEIDENHAIN linear scale for CNC lathes: SERVICES

8 101 Cont., page Training in the use of and handing over the machine tool, in case of selling new machines (2xT+MP+HO): Transportation and commissioning (Inland PHO+I+C): CE Declaration of conformity for CNC lathes: General Terms of Delivery for the Offer: Warranty (new and rebuilt (CNC machine tool / inland / ):