The teach-in lathe. New generation SE

Transcription

1 The teach-in lathe New generation SE

2 New generation SE Description Friendly user lathes with high chip removal capacity The SE Series combines the working capacity of a conventional lathe with the advantages of a CNC one. The SE are easy to use lathes that make possible the production of short series of pieces, prototyping or training centers, thanks to the Siemens or Fagor controls that allow the programming in both conversational and ISO languages. The CNC lathes of the SE Series are accurate and robust machines, satisfying the most demanding working conditions, beside the SE is characterized by its chip removal capacity as consequence of the electronic variable speed drive and the high torque provided by the three-speed gear box.

3 Standard accessories >SIEMENS 88D Advanced >Trajectory graphics >Profile editor >Electronic hand wheel for the X axis and Z axis >Electronic variable speed drive with 3 ranges >Manual quick change tool post with tool holders >Manual tailstock >Coolant equipment >Automatic lubrication of the slide ways >Main spindle reducing bush and dead centres >Chip collecting tray >Work light >Tower lamp >Enclosure as per EC standards >Leveling plates >Instruction manual >CE compliant IN PINACHO WE BELIEVE THAT SUCCESS CAN BE ACHIEVED THROUGH DELIVERING HIGH QUALITY PRODUCTS. OUR GOAL IS TO OBTAIN THE EXCELLENCE OF OUR MACHINES IN ORDER TO SATISFY THE MOST DEMANDING CUSTOMERS

4 Diversity of controls SIEMENS 88D Advanced >7.5 color display >Simple and intuitive operator interface >Wide range of technology cycles >High performance and precision >USB plug and play port >RS232C port >Ethernet RJ45 >Optional software Manual Machine Plus

5 FAGOR 837 TC FAGOR 855i/FL-TC > 7.5 LCD color display > ISO & conversational language programming > Interactive editor in machining canned cycles > Teach-in editing > Tool Inspection > USB plug and play port > DNC for PC communication. RS232 > Flash memory 128MB

6 Pinacho uses the best raw materials > All castings are grey pearlitic cast iron GG2/25 all made in Pinacho s foundry > Beds are induction hardened and slide ways ground; the hardness is 4-45 HB/ 43 HRC > Gears made of F155 steel > Bearings SKF, FAG and TIMKEN > Hardened and ground steel spindles > The complete package of control, X & Z servo-motors and drivers is original from the control brand: Fagor or Siemens

7 Optional accessories > Controls Fagor 837 TC y 855i/FL-TC > Larger spindle bore options up to 155 mm > 4, 8 or 12 positions automatic turret > Self-centering and independent 3 or 4 jaws chuck > Hydraulic chuck and tailstock > Rear chuck > Steady rest and follow rest > Hydraulic steady > Automatic or semi-automatic bar feeder > 6 Bar coolant pump > Portable hand wheel > Casting pedestals > Chip conveyor > Part catcher > Renishaw tool setter Larger spindle bore up to 155 mm Hydraulic chuck Chip conveyor Automatic 8 station turret Note: The availability of some of the listed accessories depends on the installed control model

8 Torque & power characteristic curves, SE SE-2 > Ø42 POWER (kw) 4, ,5 3 2,5 2 1,5 1, RPM TORQUE (Nm) POWER (kw) 6 5, SE-25 > Ø RPM TORQUE (Nm) POWER (kw) 6 5,5 5 SE-25 > Ø RPM TORQUE (Nm) R1: Power/Potencia S1 (kw) R2: Power/Potencia S1 (kw) R3: Power/Potencia S1 (kw) Torque/Par S1 (Nm)

9 Torque & power characteristic curves, SE RPM POWER (kw) 8 7,5 7 SE-325 > Ø8 TORQUE (Nm) RPM POWER (kw) 8 7, SE-325 > Ø RPM POWER (kw) 8 7 7,5 SE-325 > Ø155 TORQUE (Nm) R1: Power/Potencia S1 (kw) R2: Power/Potencia S1 (kw) R3: Power/Potencia S1 (kw) Torque/Par S1 (Nm)

10 Tool interference diagram, SE > SE 2 QCTP & 4 station turret A A

11 Tool interference diagram, SE > SE 25 QCTP & 4 station turret A A

12 Tool interference diagram, SE > SE 325 QCTP & 4 station turret A A

13 MODEL SE 2 SE 25 SE 325 SPECIFICATIONS MM INCH MM INCH MM INCH Control Siemens 88D Advanced / Fagor 837 TC / Fagor 855i/FL-TCv Center distance 75/1 3 /4 1/15 4 /6 1/15/2/3 4 /6 /8 /12 Center height Swing over bed Swing over carriage ¾ Swing over cross slide 245 9¼ 31 12¼ Cross slide travel 185 7¼ 235 9¼ 3 11¾ Bed width Headstock Main spindle bore 42 1 ½ ¼ Main spindle nose (ASA/CAM-LOCK) A2-5/D1-5 A2-6/D1-6 A2-8/D1-8 A2-8/D1-8 A2-8/D1-8 A2-11/-- Main spindle morse taper (MT) Speed range (rpm) Range I Range II Range III Working feed Z, X (mm/min) Z - axis ball screw ø & pitch (mm) 4/1 4/1 4/1 Specifications subject to change without notice. Not responsible for typographical error. Machines are shown with optional equipment

14 MODEL SE 2 SE 25 SE 325 SPECIFICATIONS MM INCH MM INCH MM INCH X - axis ball screw ø & pitch (mm) 2/5 2/5 2/5 Maxium tool Dim. 2X2 ¾ X ¾ 25X25 1 x1 25X25 1 x1 Tail stock barrel ø 58 2 ¼ 68 2½ 95 3 ¾ Tail stock barrel travel ¾ 22 8 ½ Tail stock morse taper (MT) Position Accuracy (mm) Repeatability (mm) Fixed Steady capacity 1-125/11-2 ½-5/5½ /14-3 ½-5½/5½ /18-4 ½-7 ¼/7 ¼-15½ Follow rest capacity 1-8 ½-7¼ 1-1 ½-4T 1-14 ½-5½ Main Motor Power (kw) 4 Coolant pump power (kw).37 Coolant tank capacity (l) 42/ / /111/151/21 Length (mm) 225/25 28/33 28/3325/392/483 Overall dimensions Width (mm) 1115 Height (mm) / /214 Weight (kg) 15/13 162/ /22/26/32 Verification standard DIN 865 DIN 865 DIN 865 Specifications subject to change without notice. Not responsible for typographical error. Machines are shown with optional equipment

15 SE 2 A B C D MAXIMUM WORKPIECE WEIGHT A (mm) B (mm) C (mm) D (mm) WEIGHT Kg MAXIMUM WEIGHT BW CHUCK AND TAILSTOCK MAXIMUM WEIGHT ON CHUCK SE 2 X SE 2 X SE 2 X SE 2 X

16 SE 25 A B C D MAXIMUM WORKPIECE WEIGHT A (mm) B (mm) C (mm) D (mm) WEIGHT Kg MAXIMUM WEIGHT BW CHUCK AND TAILSTOCK MAXIMUM WEIGHT ON CHUCK SE 25 X SE 25 X SE 25 X 1 45 SE 25 X

17 SE 325 A B C D MAXIMUM WORKPIECE WEIGHT A (mm) B (mm) C (mm) D (mm) WEIGHT Kg SE 325 X SE 325 X SE 325 X SE 325 X MAXIMUM WEIGHT BW CHUCK AND TAILSTOCK SE 325 X SE 325 X SE 325 X SE 325 X MAXIMUM WEIGHT ON CHUCK 36

18 METALÚRGICA TORRENT, S.A. - PINACHO Partida De La Sierra s/n, 2231 Castejón Del Puente (Huesca) SPAIN / Fax : / europe@pinacholathescnc.com / info@pinacholathescnc.com