Diamond discs. Ordering guide. Diamond discs For cutting, contouring and separating

Transcription

1 Diamond discs. Ordering guide. Diamond discs For cutting, contouring and separating

2 Innovative diamond discs Extended field of application in the dental laboratory due to an optimized coating procedure and an innovative design. Disc with honeycomb design permitting a clear view of the workpiece during separating the separation and contouring of ceramics. Advantages: optimal visibility and flexibility very large chip spaces smooth grinding without transitions efficient material reduction spiral reinforced to guarantee greater stability when working on ceramics and plaster extremely large and stable version for deflasking pressed ceramic objects */400* * for plaster XC Diamond disc with resin bond for separating and trimming pressed and hard ceramics and metal alloys. Advantages: reduced heat generation excellent stability and long service life K Diamond discs for use in the turbine for separating zirconium casting sprues, with water cooling ZR /080/100

3 Partially coated diamond discs Plaster rough contouring separating teeth in stone models separating sprues *coarse diamond grit special construction to avoid "jumping" 0,25 mm =0,25mm separating and contouring of ceramics and acrylics 911HK =0,20mm rpm 911HK =0,20mm 6911HK * =0,22mm rpm 6911HK * =0,22mm hyperflexible coated on the upper side separating and contouring on one side only D =0,25mm 0,25 mm 2-grit coating separating and initial grinding without instrument change fine grit on the outer surface coarse grit on the inner surface 911HV =0,10mm rpm 911HV =0,10mm hyperflexible coated on the lower side separating and contouring on one side only =0,15/0,25 mm 0,15/0,25 mm extra-fine diamond grit extra-fine separating 911HEF =0,10mm rpm 911HEF =0,10mm 911HH =0,10mm rpm 911HH =0,10mm flexibel diamond interspersed rim *coarse diamond grit =0,17mm rpm =0,17mm 0,15 mm 911H =0,15mm rpm 911H =0,15mm rpm 911H =0,15mm coarse diamond grit rough separating 0,17 mm * =0,17mm reduced flexibility coated on both sides separating and contouring separating and grinding on both sides =0,30mm rigid coated on both sides 6911H =0,20mm rpm separating and grinding on both sides 6911H =0,20mm flanged for excellent stability *coarse diamond grit straight separating 0,60 mm =0,60mm 0,15 mm 911HF =0,15mm 6911HF * =0,20mm Plaster Metal = optimal speed

4 Completely coated diamond discs fine diamond grit flexible open-meshed disc coated on both sides 0,18 mm =0,18mm reduced flexibility coated on both sides *coarse diamond grit separating and rough contouring 918B =0,30mm rpm 918B =0,30mm 918B =0,30mm 6918B * =0,30mm 0,18 mm ultra-fine separating and contouring without transitions /140 =0,18mm rpm =0,18mm rpm =0,18mm extremely flexible open meshed disc coated on both sides coarse diamond grit smooth separating and contouring without transitions =0,22mm rpm =0,22mm German patent DE European patent pending EP ,22 mm reduced flexibility coated on the upper side separating and rough contouring separating and contouring =0,20mm rpm =0,20mm 911HP =0,15mm 0,15 mm reduced flexibility coated on the lower side separating and rough contouring reduced flexibility coated on the lower side =0,20mm rpm =0,20mm =0,20mm 919P =0,20mm Perforated diamond discs reduced flexibility coated on both sides rough grinding and separating contouring open-meshed disc spiral reinforced coated on both sides coarse diamond grit *for Plaster only Plaster ultra-fine separating and contouring without transitions 918PB =0,30mm rpm 918PB =0,30mm =0,22mm rpm extremely flexible coated on both sides ultra-fine diamond grit * =0,32mm 0,22 mm * =0,32mm spiral reinforced diamond disc with flange to ensure great stability extra-coarse diamond grit fine separating and contouring (clockwise rotation only) Investment compounds/plaster cutting muffles for deflasking ceramic objects also suited for cutting plaster =0,10mm flexible coated on both sides rough separating and contouring (clockwise rotation only) 924XC =1,10 mm 1,10 mm Plaster Metal 0,25 mm =0,25mm = optimal speed

5 Serrated diamond discs flexible coated on both sides extra-fine diamond grit Diamond wheel rounded edge separating and contouring grinding of ceramics =0,20mm rpm =0,20mm = 3,50mm coated on both sides fine diamond grit Plaster for cutting the individual teeth in stone models max. cutting depth 11.5 mm (clockwise rotation only) 1,50 mm Diamond disc with resin bond K = 1,50mm Metal for separating and trimming pressed and cast ceramics and metal alloys =0,30mm coated on both sides Miniflex diamond discs Plaster for cutting segments on models made of plaster or acrylics can be used in both clockwise and anticlockwise rotation Miniflex coated on both sides fine separating =0,15mm rpm =0,15mm rpm =0,15mm rpm 0,33 mm 987P P = 0,33 mm = 0,33 mm Miniflex coated on both sides separating separating zirconium casting sprues, with water cooling Other diamond discs/wheels ZR ZR ZR = = = rpm rpm rpm DSB-abrasive (sintered) coarse diamond grit Metal grinding of cast model frames Miniflex coated on both sides fine separating =0,50mm rpm DSB-abrasive (sintered) *coarse diamond grit 945B =0,15 mm rpm Metal grinding of cast model frames 0,40 mm =0,40mm * =0,40mm Plaster Metal = optimal speed

6 Komet Dental Gebr. Brasseler GmbH & Co. KG Trophagener Weg emgo Postfach emgo Germany Verkauf Deutschland: Telefon +49 (0) Telefax +49 (0) Komet Austria Handelsagentur GmbH Innsbrucker Bundesstraße Salzburg Austria Telefon +43 (0) Telefax +43 (0) Export: Telefon +49 (0) Telefax +49 (0) Some of the products and designations mentioned in the text are trademarked, patented or copyrighted. The absence of a special reference or the sign should not be interpreted as the absence of legal protection. This publication is copyrighted. All rights, also with regard to translation, reprint and reproduction (also in the form of extracts) are reserved. No part of this publication may be reproduced or processed using electronic systems in any form or by any means (photocopying, microfilm or other methods) without the written permission of the editor. Colours and products subject to alterations. Printing errors excepted. As at November E V20/$ Die im Text genannten Produkte und Be zeich nun gen sind zum Teil patent- und ur heberrechtlich geschützt. Aus dem Fehlen eines besonderen Hinweises bzw. des Zeichens darf nicht ge schlossen werden, dass kein Schutz besteht. Dieses Werk ist urheberrechtlich geschützt. Alle Re chte, auch die der Übersetzung, des Nach drucks und der Vervielfältigung auch von Teilen daraus, sind vorbehalten. Kein Teil des Werkes darf ohne schriftliche Genehmigung des Heraus gebers in irgendeiner Form (Foto kopie, Mikrofilm oder ein anderes Verfahren), reproduziert oder unter Verwendung elektronischer Systeme verarbeitet werden. Produkt- und Farbänderungen sowie Druck fehler vorbehalten. 11/ V2