Shell Mill Holders. Scan these QR Codes Featured Video. Current Promotion
|
|
|
- Elmer Quinn
- 7 years ago
- Views:
Transcription
1 Shell Mill Holers Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers Current Promotion Scan these QR Coes Feature Vieo 73
2 Shell Mill Holers Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers Shell Mill an Face Mill Holer Features Our Shell Mill Holers are available from stock in a wie variety of tapers an sizes, incluing CAT, BT, HSK an R8. Both metric an inch sizes are available, accommoating face mills with bore iameters ranging from 1/2" (12mm) to 2" (50mm). Taper groun to AT3 or better to ensure 80% taper contact h6 precision groun pilot for concentric an repeatable mounting of shell mill Surface groun to maintain.0002 perpenicularity to centerline ensuring flat engagement of shell mill Shell Mill Holer Nickel Chrome Molybenum Alloy boy Keys inclue as stanar for quick set up Heat-treate an coate carbon steel nut prevents wear an increases clamping pressure Coolant-Thru Applications For Stanar Shell Mill Face Mill Holer For Coolant-Through Shell Mill With coolant bolt (coolant hole through center): coolant applie from the nut face straight through, not through boy of the shell mill. A. With coolant slotte bolt (grooves along the bolt): coolant applie through boy of the shell mill. B. Moifie Shell Mill holer to supply coolant through the sies. Please contact us for more information. 74
3 Shell Mill Holers CAT Shell Mill Holers Accommoates face mills with bore iameters ranging from 1/2 (12mm) to 2 (50mm) Pilot iameter size for precision fit with cutter Removable/replaceable rive keys as stanar Fine threa locking screw inclue AT3 or better taper Available in high-spee balanceable versions Please note that the maximum RPM liste in our catalog may vary epening on the toolholer shank, weight, balanceability an the G rating. CAT40 - Inch Part Number Key Size Threa C / /4 1/4-28 C / /16 3/8-24 C / /16 3/8-24 C /8 1/2-20 C /8 1/2-20 C / /2 5/8-18 C / /2 5/8-18 C / /8 3/4-16 C / /8 3/4-16 TIR: < run out at pilot Spee: up to 30,000 rpm Set-up: quick an easy Coolant-thru: thru-pilot (optional) Milling Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers CAT50 - Inch Part Number Key Size Threa C / /16 3/8-24 C / /16 3/8-24 C / /16 3/8-24 C / /16 3/8-24 C /8 1/2-20 C /8 1/2-20 C /8 1/2-20 C /8 1/2-20 C / /2 5/8-18 C / /2 5/8-18 C / /2 5/8-18 C / /2 5/8-18 C / /8 3/4-1 C / /8 3/4-16 C / /8 3/4-16 C / /8 3/4-16 C / C / C / Note: All shell mill holers are coolant-thru. screws are not coolant-thru but can be moifie to facilitate coolant capabilities: see cutter manufacturer for moification requirement. 75
4 Shell Mill Holers Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers CAT Shell Mill Holers CAT40 - Metric Part Number Key Size CAT50 - Metric Threa C mm 50mm 40mm 19mm 10mm M10 C mm 50mm 48mm 21mm 12mm M12 C mm 50mm 58mm 24mm 14mm M16 C mm 60mm 67mm 27mm 16mm M20 Part Number Key Size Threa C mm 60mm 40mm 19mm 10mm M10 C mm 60mm 48mm 21mm 12mm M12 C mm 60mm 58mm 24mm 14mm M16 C mm 60mm 67mm 27mm 16mm M20 CAT50 Face Mill Holers Part Number Key size C50F /4 C50F / Note: Face Mill Holers are supplie with four 5/8-11 mounting bolts. Pitch circle iameter is Note: All shell mill holers are coolant-thru. screws are not coolant-thru but can be moifie to facilitate coolant capabilities: see cutter manufacturer for moification requirement.
5 Shell Mill Holers BT Shell Mill Holers Accommoates face mills with bore iameters ranging from 1/2 (12mm) to 2 (50mm) Pilot iameter size for precision fit with cutter Removable/replaceable rive keys as stanar Fine threa locking screw inclue AT3 or better taper Available in high-spee balanceable versions Please note that the maximum RPM liste in our catalog may vary epening on the toolholer shank, weight, balanceability an the G rating. BT30 - Inch Part Number Key Size Threa B / /4 1/4-28 B / /16 3/8-24 B /8 1/2-20 BT40 - Inch Part Number Key Size Threa B / /4 1/4-28 B / /16 3/8-24 B /8 1/2-20 B / /2 5/8-18 B / /8 3/4-16 TIR: < run out at pilot Spee: up to 30,000 rpm Set-up: quick an easy Coolant-thru: thru-pilot (optional) Milling Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers BT50 - Inch Part Number Key Size Threa B / /16 3/8-24 B /8 1/2-20 B /8 1/2-20 B /8 1/2-20 B / /2 5/8-18 B / /2 5/8-18 B / /2 5/8-18 B / /8 3/4-16 B / /8 3/4-16 B / /8 3/4-16 B / B / Note: All shell mill holers are coolant-thru. screws are not coolant-thru but can be moifie to facilitate coolant capabilities: see cutter manufacturer for moification requirement. 77
6 Shell Mill Holers Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers BT Shell Mill Holers BT40 - Metric Part Number Key size threa B mm 50mm 40mm 19mm 10mm M10 B mm 50mm 48mm 21mm 12mm M12 B mm 50mm 58mm 24mm 14mm M16 B mm 60mm 67mm 27mm 16mm M20 BT50 Face Mill Holers Part Number Key size B50F /4 B50F / Note: Face Mill Holers are supplie with four 5/8-11 mounting bolts. Pitch circle iameter is Note: All shell mill holers are coolant-thru. screws are not coolant-thru but can be moifie to facilitate coolant capabilities: see cutter manufacturer for moification requirement.
7 Shell Mill Holers HSK Shell Mill Holers Accommoates face mills with bore iameters ranging from 1/2 (12mm) to 2 (50mm) Pilot iameter size for precision fit with cutter Removable/replaceable rive keys as stanar Fine threa locking screw inclue AT3 or better taper Please note that the maximum RPM liste in our catalog may vary epening on the toolholer shank, weight, balanceability an the G rating. HSK40A/63A Part Number Key size threa HSK40A-SM / /16 3/8-24 HSK40A-SM /8 1/2-20 HSK63A-SM / /16 3/8-24 HSK63A-SM / /16 3/8-24 HSK63A-SM /8 1/2-20 HSK63A-SM /8 1/2-20 HSK63A-SM / /2 5/8-18 HSK63A-SM / /2 5/8-18 Coolant tube an coolant tube wrench are not inclue. See page 83 for more etails. TIR: < run out at pilot Spee: up to 30,000 rpm Set-up: quick an easy Coolant-thru: thru-pilot (optional) Milling Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers HSK100A Part Number Key size threa HSK100A-SM / /16 3/8-24 HSK100A-SM / /16 3/8-24 HSK100A-SM /8 1/2-20 HSK100A-SM /8 1/2-20 HSK100A-SM / /2 5/8-18 HSK100A-SM / /2 5/8-18 HSK100A-SM / /8 3/4-16 HSK100A-SM / /8 3/4-16 HSK100A-SM / HSK100A-SM / Coolant tube an coolant tube wrench are not inclue. See page 83 for more etails. HSK100A Face Mill Holers Part Number Key size HSK100A-FM /4 HSK100A-FM /4 HSK100A-FM / HSK100A-FM / Note: Face Mill Holers are supplie with four 5/8-11 mounting bolts. Pitch circle iameter is 4. Note: All shell mill holers are coolant-thru. screws are not coolant-thru but can be moifie to facilitate coolant capabilities: see cutter manufacturer for moification requirement. 79
8 Shell Mill Holers Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers NMTB Shell Mill Holers Accommoates face mills with bore iameters ranging from 1/2 (12mm) to 2 (50mm) Pilot iameter size for precision fit with cutter Removable/replaceable rive keys as stanar Fine threa locking screw inclue AT3 or better taper Please note that the maximum RPM liste in our catalog may vary epening on the toolholer shank, weight, balanceability an the G rating. NMTB30/40/50 Part Number Taper Key size threa N NMTB30 1/ /4 1/4-28 N NMTB30 3/ /16 3/8-24 N NMTB /8 1/2-20 N NMTB30 1-1/ /2 5/8-18 TIR: < run out at pilot Spee: up to 30,000 rpm Set-up: quick an easy Coolant-thru: thru-pilot (optional) Milling N NMTB40 1/ /4 1/4-28 N NMTB40 3/ /16 3/8-24 N NMTB /8 1/2-20 N NMTB40 1-1/ /2 5/8-18 N NMTB40 1-1/ /8 3/4-16 N NMTB50 3/ /16 3/8-24 N NMTB /8 1/2-20 N NMTB50 1-1/ /2 5/8-18 N NMTB50 1-1/ /8 3/4-16 N NMTB / NMTB shanks are suitable for use with Erickson QC spinles. NMTB Face Mill Holers Part Number Taper Key size N50F NMTB /4 N50F NMTB50 2-1/ NMTB shanks are suitable for use with Erickson QC spinles. Face Mill Holers are supplie with four 5/8-11 mounting bolts. Pitch circle iameter is Replacement Keys Note: All shell mill holers are coolant-thru. screws are not coolant-thru but can be moifie to facilitate coolant capabilities: see cutter manufacturer for moification requirement.
9 Shell Mill Holers R8 Shell Mill Holers Accommoates face mills with bore iameters ranging from 1/2 (12mm) to 2 (50mm) Pilot iameter size for precision fit with cutter Removable/replaceable rive keys as stanar Fine threa locking screw inclue AT3 or better taper Please note that the maximum RPM liste in our catalog may vary epening on the toolholer shank, weight, balanceability an the G rating. R8 Part Number Taper Key size threa R8 1/ /4 1/ R8 3/ /16 3/ R /8 1/ R8 1-1/ /2 5/ R8 1-1/ /8 3/4-16 TIR: < run out at pilot Spee: up to 30,000 rpm Set-up: quick an easy Coolant-thru: thru-pilot (optional) Milling Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers Note: All shell mill holers are coolant-thru. screws are not coolant-thru but can be moifie to facilitate coolant capabilities: see cutter manufacturer for moification requirement. 81
10 Shell Mill Holers Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers Shell Mill Holers High-Spee Balanceable Shell Mill Holers Balanceable Shell Mill Holers are available in CAT an BT taper styles. Part numbers are ientical to stanar Shell Mill Holers part numbers except that there is a B at the en. (Ex: C B) 30 an 40 taper toolholers are prebalance to G2.5 or better at 24,000 RPM 50 taper toolholers are prebalance to G2.5 or better at 15,000 RPM ynex-nikken uses a Patente Balancing Metho which allows greater compensation necessary for extremely high rpm applications. HSBalance toolholers come with a printout of actual balance conition HSBalance toolholers nee to be use with balance-qualifie pull stus A balancing machine is require to balance or re-balance toolholers CAT40 HSBalance Shell Mill Holer BT40 HSBalance Shell Mill Holer 3-ock Shell Mill Holers for ual Contact Spinle 3-ock Shell Mill Holers are available from stock an feature Nikken unique Triple Contact System. Please refer to page 239 in our technical section to learn more about Nikken s revolutionary 3-ock System an tooling line. For a complete list of part numbers an pricing, please contact our office at (800) Note: All shell mill holers are coolant-thru. screws are not coolant-thru but can be moifie to facilitate coolant capabilities: see cutter manufacturer for moification requirement.
11 Shell Mill Holers Accessories Part Number escription to use with holer size 1/2-KEYSET two 1/4 rotating pins 1/2 3/4-KEYSET two 5/16 keys with screws 3/4 1-KEYSET two 3/8 keys with screws 1 1-1/4-KEYSET two 1/2 keys with screws 1-1/4 1-1/2-KEYSET two 5/8 keys with screws 1-1/2 2-KEYSET two 3/4 keys with screws 2 2-1/2-KEYSET two 1 keys with screws 2-1/2 22-KEYSET two 10mm keys with screws 22mm 27-KEYSET two 12mm keys with screws 27mm 32-KEYSET two 14mm keys with screws 32mm 40-KEYSET two 16mm keys with screws 40mm Shell Mill Holers ER/TG/A Collet Chucks En Mill Holers Part Number to use with holer size A5/8-11 Face Mill Mounting Bolt A1/4-28 1/2 A3/8-24 3/4 A1/ A5/ /4 A3/ /2 A A10mm-P mm A12mm-P mm A16mm-P2 32.0mm A20mm-P mm Coolant Tube Wrench for HSK holers Part Number escription HSK63-WRENCH Wrench for HSK63 Coolant Tube HSK40-WRENCH Wrench for HSK40 Coolant Tube HSK100-WRENCH Wrench for HSK100 Coolant Tube Coolant tube wrenches are neee to remove or install coolant tubes in HSK toolholers Coolant Tube for HSK holers Part Number HSK63-TUBE HSK40-TUBE HSK100-TUBE escription Coolant tube for HSK63 holers Coolant tube for HSK40 holers Coolant tube for HSK100 holers 83
Milling Chuck Features
Milling Chuck Features Since its first introduction into the industry in 1963, Nikken has sold over 2,000,000 worldwide and never stopped improving its original design. Featuring multi-roller bearings
About Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
Driven Toolholders for SAUTER Turrets
Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets
L mm. 12 100 M12x1 163.120.11 14 100 M12x1 163.140.11 16 100 M12x1 163.160.11 TECHNICAL DETAILS: - Super strength steel. L mm
aw blaes lot an mortise boring bits 163 12 100 M12x1 163.120.11 14 100 M12x1 163.140.11 16 100 M12x1 163.160.11 TECHNCA ETA: - uper strength steel. - 2 HW precision groun cutting eges [Z2]. HW Z2 RH APPCATON:
KOMET. Adaptors Perfecting the Connection. With our comprehension programme of tool adaptors we have the right answer for every requirement.
KOMET Adaptors Perfecting the Connection With our comprehension programme of tool s we have the right answer for every requirement. Adaptors with connections specified by manufacturers available on request.
UNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013
STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME
TOOL CLAMPING SYSTEMS
TOOL CLAMPING SYSTEMS 2015/2016 We work for customers who have a weakness for our strengths. Companies intent on making a difference are obliged to develop constantly as well as deploy their strengths
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
Static and Driven Tools LB and LT Series
Static and Driven Tools LB and LT Series EWS Overview EWS Tool Technologies headquartered in Uhingen (Göppingen district) and with subsidiaries in the USA, South Korea and France belongs to the world wide
Phone (800) 821-8010 Fax (330) 920-0972 e-mail sales@pdq-marlin.com
1 Table of ontents asic Information dvantages of Quick hange Tooling...2 dvantages of PDQ Quick hange...3 PDQ Shank & Series information...5 Master Holders Morse Taper Holders...6 Milling Machine Holders...7
Mandrel system MIS. www.microcentric.de
Mandrel system MIS MicroCentric GmbH Berblingerstr. 16 71254 itzingen / Germany Tel.: +49 (0) 7156 17819-0 Fax: +49 (0) 7156 17819-20 E-Mail: info@microcentric.de www.microcentric.de Products in this catalog:
YUASA MILLING MACHINE ACCESSORIES & TOOLS
97 HORIZONTAL / VERTICAL 5C COLLET INDEX 550 series 2 YEAR WARRANTY Spindle is manufactured with a taper seat in body frame. Rapid opening and closing is performed with a level collet closer with a leverage
413 NOVA SYSTEM PAN AMERICAN TOOL CORPORATION 5990 NW 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX
413 NOVA SYSTEM 5990 NW 31st Avenue Ft. Lauderdale, Florida 33309-2208 PHONE (954)735-8665 TOLL FREE 1-800-423-2764 FAX (954)735-8668 2013 Pan American Tool Corporation 2013 TERMS AND CONDITIONS TERMS:
Overview. Milling Machine Fundamentals. Safety. Shop Etiquette. Vehicle Projects Machine Shop
Overview Milling Machine Fundamentals Wayne Staats, UW-Madison FSAE Safety Shop Etiquette Before Machining Indicating Calculating Feeds and Speeds Machining Maintenance Safety Respect the machines Common
indexable Center Drill
Our innovative tooling design upgrades productivity and competitive capability while reducing production requirements in a range of industries. The tooling system is designed to benefit users of machining
L I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
iglidur PRT Slewing Ring Bearing
igliur igliur Slewing Ring Bearing Stanar range Completely maintenance-free Easy installation, intercangeable sliing pas ig wear resistance For ig loa capacity, ig stiffness Available as stainless steel
Alfra Rotabest 100 Metal Core Drilling Machine. Operation Manual
Alfra Rotabest 100 Metal Core Drilling Machine Operation Manual 06/2005 1. Technical Data Prod. No.: 18630 Name : Rotabest 100 Input: Load rpm: 1800 Watt 110/175/245/385 rpm Tool Holder : MT 3 Coolant
Chapter 6 Machining Center Carbide Insert Fundamentals
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. N10G20G99G40 N20G96S800M3 N30G50S4000 N40T0100M8 N50G00X3.35Z1.25T0101 N60G01X3.25F.002 N70G04X0.5
Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable.
1 von 9 Precision made in Europe. As per DIN 8606. The heart of a system, versatile and expandable. Main switch with auto-start protection and emergency off. Precision lathe chuck as per DIN 6386 (Ø 100mm).
Router. A. Identify the major parts of the router. B. Complete a written test on safety and operating procedures of the router with 100% accuracy.
Router I. Competencies Given a properly adjusted router, instruction and demonstration of use, each student will be able to: A. Identify the major parts of the router. B. Complete a written test on safety
MaraMeter. Indicating Snap Gages
- 9-2 MaraMeter. Indicating Snap Gages Overview MaraMeter. The Indicating Snap Gage is ideal for highly accurate and reliable results on cylindrical work pieces with a narrow tolerance. MaraMeter 840 F
CAD 302.02.10.1 SK 30 1 10 (ER 16) 100 32 302.02.16.1 SK 30 2 16 (ER 25) 100 42 302.02.20.1 SK 30 2 20 (ER 32) 100 50
Spannfutter für Spannzangen DIN 6499 (ISO 15488) System ER Collet chucks for collets DIN 6499 (ISO 15488) ER-system Mandrins à pinces pour pinces DIN 6499 (ISO 15488) système ER Verwendung: Zur Aufnahme
Resharpening Companion
Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace
Simple machines. Law of Simple Machines. Resistance Force x resistance distance = effort force x effort distance
Simple machines A simple machine is a evice that requires only the force of a human to perform work. One of the properties of a simple machine is that it can be use to increase the force that can be applie
Working Drawing and Assemblies. Chapter 10
Working Drawing and Assemblies Chapter 10 Objectives 1.Define working drawings. 2. Describe how working drawings are used in industry. 3. List the major components of a complete set of working drawings.
SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC
Summit Machine Tool Manufacturing L.L.C. SmartCut EVS Series CNC Mills Combination of CNC technology and manual capability SC EVS-350B CNC SC EVS-550B CNC Summit Machine Tool Manufacturing L.L.C. SmartCut
Lathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
Milling & Machining Centers
Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
BLS 100 Orifice Plate DIN 19206
E91 2006 1Orifice Plate, Orifice Flange, Meterrun, Restriction Orifice Application Flow rate measurement of aggressive an nonaggressive meia particularly for large pipelines. Construction Orifice plate
NEW INTERCHANGEABLE REAMING HEAD SYSTEM FAST
August 2007 / NEW029.1 / PAGE 1 OF 7 NEW INTERCHANGEABLE REAMING HEA YTEM FAT ACCURATE GOO FINIH Ingersoll is introducing the QwikReam, a new high speed reaming system. The QwikReam consists of an interchangeable
GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING
GM 300 CHECK- AND MEASURING INSTRUMENTS FOR OPTIMAL TOOL CLAMPING AND lubrication Check- and Measuring instruments for optimal tool clamping and lubrication Pre-requisite for perfect machining results
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw
Home"" """"> ar.cn.de.en.es.fr.id.it.ph.po.ru.sw Milling of Grooves, Elongated Slots and Break-throughs - Course: Techniques for machining of material. Trainees' handbook of lessons (Institut fr Berufliche
4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580
PRECISION LIVE TOOLING & MACHINE TOOL ACCESSORIES MADE IN THE USA 4200 Malsbary Road Cincinnati, OH 45242 Phone (513) 984-5544 Fax (513) 984-5580 Patent Pending Live Tooling Planet Products Corporation
Fixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
Lead Screws with Plastic Nuts. Resin Lead Screws. Combination of Shaft nominal dia. & Lead
Screws with Plastic Nuts SUS3SUS33 MRH MRH eatures he Shaft is manufacture from SUS3 or SUS33, which gives excellent corrosion resistance. Wie range of combination of Shaft ia. an are available. MRH incorporates
Milling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a
Milling machine A milling machine is a machine tool used for the complex shaping of metal and other solid materials. Its basic form is that of a rotating cutter or endmill which rotates about the spindle
DRILLING MACHINES GENERAL INFORMATION
Chapter 4 DRILLING MACHINES GENERAL INFORMATION PURPOSE This chapter contains basic information pertaining to drilling machines. A drilling machine comes in many shapes and sizes, from small hand-held
22 PROPELLERS FOR VOLVO PENTA IPS
22 PROPELLERS FOR VOLVO PENTA IPS Propellers for Volvo Penta IPS Faster, further, cleaner and quieter When Volvo Penta launched the revolutionary IPS (Inboard Performance System) we set a completely new
CETAC Z-Drive Assembly
CETAC Z-Drive Assembly Replacement Guide Manual Part Number 610144 Rev 1, 2012 CETAC Technologies, Printed in USA Overview This guide describes the necessary steps to replace the Z-drive assembly on your
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES
COLLEGE OF ENGINEERING AND APPLIED SCIENCE MACHINE SHOP TOOLS AND PRACTICES I. OBJECTIVE To provide an overview and basic knowledge of the University of Wyoming, College of Engineering, equipment, tools,
Operating Instructions
Operating Instructions Sauter Tooling for more information, please consult www., and for the complete standard tooling programme, please visit www.sauter-tools.com Sauter: The world turns with us! Table
ALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine. Operation Manual
ALFRA Rotabest Piccolo 32/50 Weldon Metal Core Drilling Machine Operation Manual 06/2005 1 1. Technical Data Prod. No.: 18550 Name : Rotabest Piccolo 32/50 Weldon Input: Load rpm: 1050 Watt 400 rpm Tool
CHAPTER E. DOC (Depth of cut) t max Bore Ø.031
Step #1: stablish bore diamter Step #2: Find Depth of Cut (DOC) requirements Step #3: Follow column and row to find correct tool type Step #4: Look up tool type to find available widths CHAPTR DOC (Depth
Advantages and application of PCD and CBn tools
PCD and CBN tools Advantages and application of PCD and CBn tools Powerful and economical Tools with PCD and CBN cutting edges are the ideal solution for difficult-to machine, highly abrasive materials.
Wood Drilling.
Wood Drilling www.irwin.com A Century of Quality and Innovation In 1885, the IRWIN Auger Bit Company was formed. Over 125 years later, IRWIN is still the leading manufacturer of wood drilling bits and
Manual HSK clamping technology
Manual HSK clamping technology Simplicity, precision and speed as well as flexibility, safety and cost-effectiveness these are the demands placed on systems in modern production technology. The MAPAL HSK
High-Purity Fluoropolymer Fittings
High-Purity Fluoropolymer Fittings Hyper Fitting/Series LQ1, Work Procedure Instructions Insertion Tool The parts case is shipped together with the fitting jig. Refer to page 4 for How to Order. R type
Structural Holding System
Structural Holding System Users Manual November 2013 by Vehicle Service Group. All rights reserved. CO8812.1 502071 Rev. - 11/21/2013 CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies
CORE COMPETENCY REQUIREMENTS NIMS CERTIFIED CNC SET UP PROGRAMMER MILLING AND TURNING
CORE COMPETENCY REQUIREMENTS NIMS CERTIFIED CNC SET UP PROGRAMMER MILLING AND TURNING APPRENTICE CORE COMPETENCIES 1. Identify and Demonstrate Usage of Machine Safety and Personal Protective Equipment
QUICK-CHANGE tool system for multi-tasking and turning lathes
System solution from SISSTOOLS Tool system for upper turning-/milling spindles System solution from SISSTOOLS Increase productivity by reducing nonproductive time Very quick tool changing time SISS TOOLS
Fasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
your reliable partner EAS -Compact Backlash-free Torque Limiting Clutches K.490.V14.EN
ES -Compact Backlash-free Torque Limiting Clutches K.490.V4.EN www..com We safeguar the movements of this worl Specialists for power transmission for more than a century mayr power transmission is one
VDI Tool Holders. for Hardinge Machines. In USA, call: 800-843-8801 In Canada, call: 800-468-5946 Other, call: 607-734-2281 Fax: 607-734-8819
VI ool Holders for Hardinge Machines QUES 6/42, 8/51 and 10/65 CNC athes EIE 8/51 CNC athes HARINGE-EMAG V3/V5 Vertical CNC athes QUES WINURN 65 CNC urning Centers In USA, call: 800-843-8801 In Canada,
www.cornholesupplies.com
www.cornholesupplies.com How To Build Regulation Cornhole Boards Home of the Original Cornhole Bags and Boards Supply List: 1-4' X 8' Piece of Plywood (pre sanded) 4-2" X 4" X 8' Studs (2 by 4s make sure
Milling Milling milling cutter milling machines 1
Milling Milling is a basic machining process by which a surface is generated progressively by the removal of chips from a workpiece as it is fed to a rotating cutter in a direction perpendicular to the
B10 B11 B12 B18 B19 B20 B21
MEA MICRO CUCK MEA NEW AY CUCK MEA E CUCK MEA DOUE POWER CUCK NEW AY CUCK NEW i-power MIIN CUCK MEA ER RIP MEA SYNCRO Tapping older FACE MI AROR Type FMC ANE EAD AIR TURINE SPINDE I SPINDE i-jet ODER DYNA
Lathe Series Training Manual. Live Tool for Haas Lathe (including DS)
Haas Factory Outlet A Division of Productivity Inc Lathe Series Training Manual Live Tool for Haas Lathe (including DS) Created 020112-Rev 121012, Rev2-091014 This Manual is the Property of Productivity
The Speed of Live and the Accuracy of Fixed
The Speed of Live and the Accuracy of Fixed SG10A CYLINDER HEAD SEAT & GUIDE MACHINE Light Weight Work Head The SG10A has a light weight work head for fast and accurate centering for the minimum concentricity.
Introduction to JIGS AND FIXTURES
Introduction to JIGS AND FIXTURES Introduction The successful running of any mass production depends upon the interchangeability to facilitate easy assembly and reduction of unit cost. Mass production
Machine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
Universal Adjustable Fuel Pressure Regulator
Universal Adjustable Fuel Pressure Regulator Installation Instructions for: Part Numbers 25-302 U.S. Patent # 6,298,828! Due WARNING: to the fact that this installation deals with your fuel system this
Providing Answers For All Your Machine Tool Needs
Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION
Super G3 FAX Board-AE1 PARTS CATALOG SEPTEMBER 12, 2009 REV. 0. CANON Super G3 FAX Board-AE1 REV. 0 PRINTED IN U.S.A.
Super G FAX Boar-AE1 PARTS CATAOG SEPTEMBER 12, 2009 REV. 0 COPYRIGHT 2009 CANON INC. CANON Super G FAX Boar-AE1 REV. 0 PRINTED IN U.S.A. PREFACE This Parts Catalog contains listings of parts use Diagrams
AZEK Rail Install Guide
TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with CableRail by Feeney... 1 Installing CableRail by Feeney for AZEK Rail... 7 Installing AZEK Rail Stairs with CableRail
SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
These features have made Lo Torc valves the choice of high pressure plug value users, worldwide:
LO TORC Plug Valve The high value, dependable performance, and low maintenance requirements of Halliburton Lo Torc valves can help reduce overall operating costs and help cut downtime. These features have
HOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
Technical Information
tapping Technical Information Troubleshooting Guide 115 TAP DOES NOT START Program depth: Tap drill size: Tap sharpness: Compression stroke may use up the entire program depth. Check for tap drill size.
RadianceRail Installation Guide
RadianceRail Installation Guide Installing RadianceRail with CableRail by Feeney... 2 Installing CableRail by Feeney for RadianceRail... 7 Installing RadianceRail Stairs with CableRail by Feeney... 10
Cabinet Locks. Benefits:
Cabinet Locks Medeco high security cabinet locks are specifically designed for drawer or cabinet door applications where a conventional utility cam lock may not be suitable. Cabinet locks utilize heavy-duty
BSME Series SEXC Series
TOOLING NEWS E-124 P M K N S H CBN Small Hole Boring Bar Systems BSME Series SEXC Series BSME SEXC Series with brazed CBN cutting edge Minimum bore diameter = 2,5mm Series with indexable CBN insert Minimum
TUBE-AUGER Tube End Prep Machine Kit For ¾ 3 Tube ID (EP443010)
TM-33 Elliott offers a complete line of precision tube tools, including: tube expanders Boiler Expanders Heat Exchanger Expanders Condenser Expanders Refinery Expanders tube rolling motors & torque controls
Mueller B-101 and A-3 Drilling and Tapping Machines
TM TM Mueller and Drilling and Tapping Machines A guide to selecting Mueller Equipment Mueller TM TM and Drilling and Tapping Machines When it comes to line stopping and drilling and tapping technology
MACHINING OPERATIONS AND MACHINE TOOLS
MACHINING OPERATIONS AND MACHINE TOOLS 1. Turning and Related Operations 2. Drilling and Related Operations 3. Milling 4. Machining & Turning Centers 5. Other Machining Operations 6. Shape, Tolerance and
FACTORY INSTALLED OPTIONS:
Myford MG 12 M MG 12 ME Manually operated cylindrical grinding machine - capacity 5in x 12in - providing hand operated table traverse, hand operated wheelhead travel, table swivels 7 degrees either way,
Signature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center
Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale
MULTI PURPOSE MACHINE OPERATION MANUAL CHIZHOU HOUSEHOLD MACHINE-TOOL WORKS THE PEOPLE S REPUBLIC OF CHINA
HQ400 HQ400/1 MULTI PURPOSE MACHINE OPERATION MANUAL CHIZHOU HOUSEHOLD MACHINE-TOOL WORKS THE PEOPLE S REPUBLIC OF CHINA CONTENTS 1 OUTSIDE DRAWING 3 2 TECHNICAL SPECIFICATIONS 3 3 APPLICATION 4 4 CONSTRUCTION
IMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
Weeke CNC Machining Center, Model BP-150 Optimat
Weeke CNC Machining Center, Model BP-150 Optimat Weeke's BP-150 is a truly industrial machine designed primarily for point-topoint boring and machining of flat components without special workpiece fixtures.
Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced Mills
1 of 6 9/9/2014 3:59 PM I. Catalog Information Credit- Degree applicable Effective Quarter: Fall 2014 MCNC 75B Computer-Aided Numerical Control (CNC) Programming and Operation; Lathe Introduction, Advanced
CALIBRATION FOR LAL20X & LAL24X
CALIBRATION AND FAULT FINDING FOR LAL20X & LAL24X DUMPY LEVELS MEASURING EXPERTS SINCE 1869 How The LAL20X & LAL24X Works The Automatic level is called Automatic because it requires only a simple basic
PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING
PROVEN SOLUTIONS FLIUD END MACHINING FLUID END MACHINING PROVEN SOLUTIONS & TOOLING SECO PROVEN SOLUTIONS WILL IMPROVE YOUR PROCESS When you partner with Seco, our team of metalworking experts evaluate
Step-by-step instructions:
Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
4BT A/C Bracket Directions
4BT A/C Bracket Directions This kit will be broken into smaller kits for ease of installation and recognition of hardware. Tools needed for install; 3/8 Ratchet 1/2 wrench 1/2 socket 9/16 wrench 9/16 socket
FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER
Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware
Industrial Cutting Tool Organization CNC Storage & Transport
Industrial Cutting Tool Organization CNC Storage & Transport Since 1926, a commitment to you, our customer. Nearly a century ago, Gene Huot (pronounced Hewitt ) invented and marketed the famous Drill Index,
Milling and Machining Center Basics
Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will
CHROME FRONT BRAKE MASTER CYLINDER KIT
-J075 REV. 009-0-0 CHROME FRONT BRAKE MASTER CYLINDER KIT GENERAL Kit Number 5-99D, 5-99D Models These Chrome Master Cylinder Kits are designed to replace the original equipment front brake master cylinder
GEH6290. Mechanism Circuit Breaker. Handle Operating Mechanism Cat. No. Type NEMA 1, 3R, 12, 13 NEMA 4/4X Cat. No. Cat. No. Series Instruction
GEH6290 g Cable Operator Mechanisms for E150, SE150, SF250, and SG600 Spectra RMS Circuit Breakers Type SCH1/1X, SCH2/2X Flange-Mounted Handle Assemblies, Cable Series SC3L SC10L and Type SC0M1A, SCOM1EF,
Chapter 9 MILLING-GRINDING-DRILLING AND SLOTTING ATTACHMENT (VERSA-M I L)
Chapter 9 MILLING-GRINDING-DRILLING AND SLOTTING ATTACHMENT (VERSA-M I L) GENERAL DESCRIPTION The milling-grinding-drilling and slotting attachment is commonly referred to as a Versa- Mil. It is a compact,
OPTICAL MEASURING MACHINES
OPTICAL MEASURIN MACHINES SYLVAC SCAN Dedicated to the fast and contactless measuring of cylindrical parts, our new SCAN machines are based on the principle of the scanner. This technique allows to reproduce
ME 1355 CAD/CAM LABORATORY CNC MILLING PROGRAM. Study of G Codes and M Codes to Write Manual Part Programming for Fanuc Control Systems
ME 1355 CAD/CAM LABORATORY CNC MILLING PROGRAM Ex.No.1 Study of G Codes and M Codes to Write Manual Part Programming for Fanuc Control Systems PREPARATORY FUNCTION ( G CODES ) The preparatory functions
TA-A BED TYPE MILLING CENTRE
TA-A BED TYPE MILLING CENTRE TA-A BED TYPE MILLING CENTRE MILLING CENTRE HIGH CAPACITY IN A COMPACT MACHINE High stock removal capacity TA-A BED TYPE MILLING CENTRE 2 TA-A The TA-A milling centre is a
HIGH-PERFORMANCE REAMING. HORN-System DR. License. Modular Tooling System Ø 11.9-140.6 mm. In the UNITED STATES call us toll free 1-888 - 818 HORN
HIGH-PERFORMANCE REAMING R HORN-System DR License Modular Tooling System Ø 11.9-140.6 mm R1 R HIGH-PERFORMANCE REAMING INSERT type DR straight fluted Cutting edge Ø Ds 11.900-140.600 mm for through hole
CNC Milling: Welcome to CNC MASTERS, Inc.
1 of 10 4/10/2008 9:48 PM Home About CNC Masters Products Master Software Prices / Order Now Contact Us Testimonials Sitemap CNC Milling: Welcome to CNC MASTERS, Inc. Catalogue & Ordering Form: Your premier