WATERWELL DRILLING RIGS & ACCESSORIES
|
|
- Edgar Foster
- 7 years ago
- Views:
Transcription
1 WATERWELL DRILLING RIGS & ACCESSORIES
2 ATERWELL DRILLING RIGS & ACCESSORIES Drillmec make profit by the experience coming out from the acquisition of five well know rig manufacturers since the beginning of last century, namely: Drillmec presence in the field Comprehensive drilling program Drilling is continuously developing new design in conventional and hydraulic rigs, creating a new frontier for water research drilling. Drillmec S.p.A. is present in more than fifty countries in all the continents with its products. Drillmec S.p.A. presence in the oil industry offers to the customer the up to date solution in the field. Drillmec S.p.A. product line is not limited to drilling; Drillmec S.p.A. can supply everything is needed to drilling contractors, giving a comprehensive drilling program wich portfolio includes: Drawworks and associated products Mud pumps and expendables Power swivels Mast & substructure Rotary & Hammer drilling equipment Rod & casing Structural elements Accessories Every component is designed by Drillmec s experienced engineers to meet the customer needs. The geographic distribution of our equipments grant us a test in every environmental condition from artic through desert to humid tropical environment. After many years of the hardest test imaginable, the real utilization, Drillmec S.p.A. can rely on unparalleled efficiency and safety for the final user. Every components is designed by Drillmec s experienced engineers to meet the drilling industry demand.
3 Rig systems Service and repair center Customer care service Commissioning Training: Drilling Academy On site repair service Customize solutions Rig systems are as imporrtant as the rig itself in the field. Drillmec S.p.A. furnishes complete mud systems, with fully personalized layouts, at request in the exclusive fast moving configuration, and capacity adequate for all the necessity of the field. Drillmec S.p.A. manufactures a wide range of duplex & triplex mud pumps up to 1600 HP, and all the manifold system to connect the mud pumps and the drilling rig. Drillmec S.p.A. can supply Air systems and air vessels, generator packs, yard equipment, camp hospital, warehouses and workshops, on a turn key approach. In the Drillmec facility there is a big workshop dedicated to the reconditioning and repair of customer rigs, mud pumps and accessories. Well experienced technicians work to replace consumables and renew equipment after many years of work. Drillmec provides a wide variety of services from overhauling equipment to upgrading of existing equipment for new customer specification. Drillmec can provide comprehensive engineering services directly on site. When a customer buy a rig, a mud pump or a full package from Drillmec S.p.A. he buy also its 360 degree customer care service. Drillmec S.p.A. rigs are fully tested in one of our test yards before shipment, but our technicians follow the rig to assist client personnel in the first days or weeks on site of the equipment. It is possible, following customer s requests, furnish highly qualified personnel also to drill one or more complete wells with the purchased rig. The training of the personnel, is a key point for reach the high performances Drillmec S.p.A. rig are famous for. Drillmec S.p.A. staff organizes real full immersion training courses, aimed to teach to operators how to work with the various equipment, and to the engineers all the technical features to enable them to make repairs by themselves. We have several ready-to-go technical teams that can reach in the fastest way field with the right spare parts to solve any problem in the minimum time possible. Drillmec S.p.A. has also spare parts warehouse in many countries in the world, with local well trained technicians that can intervene much faster than our engineers from Italy. Drillmec S.p.A. is committed to provide solutions to meet the need for economical and ecological performance of its customer. Drillmec S.p.A. is able to reach this result by means of an A-Z program beginning with the accurate analysis of the customer needs, the individuation of the solutions he needs to begin the design: the customer can work along with our engineers at the definition of the project to get exactly the product he need with all the specific features for his job in a manner that is both reliable and cost effective. In the frozing Siberian plains or in the baking Sahara Desert, for any request Drillmec S.p.A. has a solution or is willing to find one. Our R&D department utilize the latest available software to analyze data, guaranteeing accurate results and providing clients with the necessary calculations and certifications according to API requirements. Since its inception, Drillmec has been dedicated to putting forward innovative proposal that add real value to projects by reducing the cost of drilling operations in the gas & oil field. Figures 1 - Mud pump during refurbishing 2 - Supply chain integration 3 - Training of the personnel "A good partner for customer satisfaction"
4 HSE Human resources are driving force behind Drillmec S.p.A. development. This is why Drillmec is paying a special attention to the comprehensive design and manufacturing of its product under the most extreme conditions. By applying Drillmec HSE plan we aim at zero lost time from accident to ensure zero lost opportunities for our clients and ourselves. Safety management continuously investigate the new technology to reduce the risk for the manpower. Professional in-house safety advisor supervise all the manufacturing process to avoid in jurles and human mistakes. Standardised procedures and support, our global safety through grater preventive intelligence. This means commitment to: Comprehensive training Permit to work system Safety audits Follow up and feed back systems Safety meeting Safety training Looking out at the health ou our people is not limited to the medical assistance but include training to hygiene measures and reduction of high risk areas. Since prevention is better than cure, we design equipment and methods that help protect people and environment from health risk before accident happens. Quality Certifications Drillmec consistently aim to meet customer requirements. Through a Total Quality Management program Drillmec plan to continuously improve the quality of its own service. Drillmec facility is licensed by the American Petroleum Institute and has quality program in compliance with API Q1 and ISO Drillmec is authorized to use the official API monogram on derrick, masts, substructures, and drilling equipment in accordance with: API 4F API 8A API 8C API Spec7 API 7K Drilling and well servicing structures Drilling and production hoisting equipment Drilling and production hoisting equipment Rotary drilling equipment Specification for drilling equipment The Quality Dept. is a key point of Drillmec S.p.A. success in the world of high technology manufacturer. There are technicians trained to control every single piece that will be assembled on our products, they brand it with the code of the piece and the code of the machine on which that piece will be applied. Only with the Quality Dept. approval the piece is employed and installed. All the major welding in the structures are tested with not destructive methods such as magnetic particles and penetrants liquid. Drillmec S.p.A. seek for customer satisfaction pass through reaching the highest quality standards. This give reliability to our products, reliability that become save of time for the end user and so save of money. ISO 9001 Certified Registration No. 0076
5
6 Hydraulic Drilling Rig Box type mast nominal hoisting capacity metric ton (lbs) nominal power range HP (kw) useful DP length ft (mm) casing nominal weight (kg/m) nominal G 6 G 15 G 25 G 30 G 45 6 (13227) 15 (33069) 21 (46297) 28 (61729) 45 (99208) (74-140) ( ) ( ) ( ) 10 (3048) 20 (6096) 20 (6096) 20 (6096) 20 (6096) Nominal 80% nominal hoisting capacity Open face type mast nominal hoisting capacity metric ton (lbs) nominal power range HP (kw) useful DP length ft (mm) casing nominal weight (kg/m) nominal G 38 G (83775) 50 (110231) 25 (7620) Range Nominal 80% nominal hoisting capacity Telescopic type mast nominal hoisting capacity metric ton (lbs) nominal power range HP (kw) useful DP length ft (mm) casing nominal weight (kg/m) nominal G 55 G 60 G 75 G (121254) 60 (132277) 75 (165346) 100 (220462) Range 3 Range 3 Range 3 Range Nominal 80% nominal hoisting capacity Figures 4 - G G G G
7 Mechanical Drilling Rig Stand up type mast nominal hoisting capacity metric ton (lbs) nominal engine power HP (kw) mast clear height m (ft) DM 20 DM (44092) 33 (72752) 350 (261) 364 (272) 12 (39) 15 (49) Tilted type mast nominal hoisting capacity ton (lbs) nominal engine power HP (kw) mast clear height m (ft) MR 3500 MR 4000 MR 5000 MR 6000 MR 7000 MR 7500 MR ( ) 85 (187392) 113 (249122) 136 (299828) 160 (352739) 180 (396832) 200 (440924) 508 (379) 540 (403) 540 (403) 540 (403) 800 (1080) 800 (1080) 800 (1080) (62) 35 (115) 35 (115) 35 (115) 36 (118) 36 (118) 36 (118) Figures 8 - MR MR-5000/MR MR
8
9 Duplex pumps for water well drilling DUPLEX MUD PUMPS 6DC3C 8D1S 6DS 10D2C 8DS liner size (In) min max / / /2 stroke in max pressure psi bar max delivery GPM. l/min rated input HP kw approx. mass lbs kg max SPM Based on 100% volumetric and 90% mechanical efficiency Triplex pumps for drilling-cementing-fracturing TRIPLEX MUD PUMPS 7TS600 9T800 9T T T1600 liner size (In) min max /2 stroke in max pressure psi bar max delivery GPM. l/min rated input HP kw approx. mass lbs kg max SPM SPECIAL TRIPLEX MUD PUMPS liner size (In) min max stroke In max pressure psi bar max delivery GPM l/min rated input HP kw approx. mass lbs kg max SPM 8T300M 8T600M 4 7 1/ / Based on 100% volumetric and 90% mechanical efficiency Figures 11-12T Duplex Pump 13-7TS
10 Drillmec can supply any kind of drilling accessories Rotary drilling equipment - Bits - Drill string components Rods and casing - Mud testing kit - Mud testing apparatus - Chemicals (polymers, bentonite, foam...) Stabilizer and rollerbit Hammer drilling equipment - Down the hole hammers - DTM bits - Hammer drilling accessories Accessories 1 Bit 2 Drill pipes 3 Hole opener 4 Stabilizers 5 Drill pipes
11 Integrated Services Drillmec can supply the full chain of water village supply. Including: Drilling water wells Water distribution pipe line Water treatment (potabilisation) Agricultural distribution Optionals 1 - Outriggers with mechanical locking 2 - Reverse circulation kit 3 - Reverse circulation kit 4 - Side shifted top drive (20 ) to clear the hole axis 5 - Hydraulic power tong. 1 - Opening: Centrifugal pump 7 - Drillmec mud pump mod. 8DS 8 - Crown block and travelling 9 - block with triple hook 9 - Soilmec mud pump mod. 8DS 10 - Crown block and travelling block with triple hook Mast extension 12/13 - Air compressor 14 - Control board
12 Drillmec continuously improves its products, therefore technical specifications are nominal and subject to change commercial network SOILMEC S.p.A. - Beijing Repr. Office SOILMEC JAPAN CO. LTD. SOILMEC MISR. S.A.E. CO. SOILMEC (H.K.) LIMITED SOILMEC EMIRATES L.L.C. SOILMEC FAR EAST PTE. LTD. SOILMEC GULF FZCO SOILMEC LTD. SOILMEC BRANHAM INC. 04/ N-Cils-Il Digitale certified quality system Drillmec quality management system is certified by API (American Petroleum Institute) and DNV (Det Norske Veritas) and GOST-R (Russian approval) for special products a company 12, via 1 Maggio Gariga di Podenzano PIACENZA (Italy) Tel Fax / web site: info@drillmec.com
AUTOMATIC HYDRAULIC DRILLING RIGS HH Series HH Series hydraulic hoist series The drilling industry is actively involved in developing new technologies to solve common problems, such as increasing safety
INTRODUCTION. Top Oilfield 3.43. Top Oilfield
Oil & Gas Directory Middle East - 2014 217 C o r p o r a t e P r o f i l e 3.43 INTRODUCTION Established in 1995 couples industry proven expertise in the maintenance, repair and refurbishment of land or
Drilling Rigs, Equipment & Parts
Drilling Rigs, Equipment & Parts Rig Manufacturing, LLC Manufacturing Solutions Drilling Rig Packages We can offer NEW USA made drilling rig packages in traditional SCR-DC or VFD-AC. These rig packages
Helping Our Customers Achieve Superior Results. Top Drive
Helping Our Customers Achieve Superior Results Top Drive Intelligent Accessories Canrig s commitment to drilling efficiency has resulted in the development of a line of intelligent top drive accessories.
Jobson THE RIGHT CONTACT
THE RIGHT CONTACT Jobson Italia srl was set up in 1990. The following services are rendered 365 days a year, 24 hours a day: Stocking and trading of spare parts: Main Engines, auxiliary engines, pumps,
Drilling fleet. Capabilities. Agriculture. Water. Environment.
Drilling fleet Capabilities Agriculture. Water. Environment. Drilling fleet Overview The Gilbert & Sutherland drilling fleet includes an EDECO Model 10s mounted on a one-tonne, four-wheel drive multi-function
Drilling, Workover & Well Servicing Rigs
Drilling, Workover & Well Servicing Rigs 1 Stewart & Stevenson Drilling, Workover & Well Servicing Equipment for the Oilfield Stewart & Stevenson s Crown model drilling, workover and well servicing equipment
Measurement While Drilling (MWD) Tools
Measurement While Drilling (MWD) Tools 2 www.micon-drilling.de Phone +49.5144.49360 Company profile The MICON-Drilling GmbH is a worldwide operating service company, specialized in sales and rental of
PVE Piling and Drilling Rigs Powerful, Versatile and Efficient. PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines
PVE Piling and Drilling Rigs Powerful, Versatile and Efficient PVE Piling and Drilling Rigs B.V. Worldwide supply of specialized foundation machines Member of the PVE Piling and Drilling Rigs PVE Piling
How To Maintain A 50 Ton Tankers
On behalf of our client Pacifico Forages S.A. France, we offer for immediate sale the following Drilling Rig and Associated Equipment. The Equipment may be purchased as a whole or in individual packages
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
Pipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
Worldwide network in over 40 countries.
Worldwide network in over 40 countries. April 2012 56 rue de Neuilly 93136 Noisy le Sec Cedex - France Tel : +33 (0)1 49 42 72 95 Fax : +33 (0)1 48 44 00 02 E-mail : contact@ptc.fayat.com PTC s vibrodrivers
Topics of the Presentation
Drill Rig Safety Topics of the Presentation Personnel safety and monitoring PPE Health (Drugs and Alcohol) Drill Rig operation Safe set up procedures Safe operation of machine Safety related accidents
3516 Industrial Engine
CAT ENGINE SPECIFICATIONS V-16, 4-Stroke-Cycle Diesel Bore...170.0 mm (6.69 in) Stroke...190.0 mm (7.48 in) Displacement... 69.06 L (4,214.3 in 3 ) Aspiration...Turbocharged / Aftercooled Compression Ratio...13.0:1
Welcome at Aker Wirth
part of Aker Welcome at Aker Wirth NFLF Winter Conference 12.-14.03.2010 Drilling Facilities Upgrade 2009 Aker Solutions part of Aker Aker Wirth OILFIELD DRILLING EQUIPMENT New Technology / Drilling facilities
HYDRA-GRENE - A Powerful Partner for the Industry
HYDRA-GRENE - A Powerful Partner for the Industry Quality products and recognized brands As a Danfoss Sales & Service Partner, Hydra has in-house specialists. We offer PLUS +1 programming and flexible
TBA 100 A Performance Study of the New Generation 100-ton Advanced Technology Rig. Maximilian Trombitas, Product Manager Bauer Deep Drilling GmbH
TBA 100 A Performance Study of the New Generation 100-ton Advanced Technology Rig Maximilian Trombitas, Product Manager Bauer Deep Drilling GmbH Outline Field study Lessons learned Rig design changes Mechanization
Founded in 1993, TUBOSER is considered one of the most active oilfield inspection companies in Tunisia, Libya and Mauritania.
OHSAS 18001 ISO 29001 About us We are a third party oilfield inspection company, a top provider of Oilfield Inspection Services in North Africa. Headquartered in Sfax Tunisia, the company's Inspection
HMIS Top Drive System
System Description HMIS Top Drive System 250TON HMIS 475HP DOCUMENT NAME: 880025 REV 2 SYSTEM DESCRIPTION COPYRIGHT AND DISCLAIMER Tesco Corporation ("TESCO") has made every effort to ensure that this
Oil / Air Cooling Units for mechanical engineering and mobile hydraulics
Oil / Air Cooling Units for mechanical engineering and mobile hydraulics ViFlow Finland Oy Kauppakartanontie 7 A 1 00930 Helsinki, Finland tel. +358 40 178 0920 fax +358 9 4789 2800 viflow@viflow.fi www.viflow.fi
A U T O M O T I V E L I F T S
Q U A L I T Y Y O U E X P E C T AT A P R I C E Y O U W O U L D N T T H E S TA N D A R D I N I N F O R M AT I O N, E Q U I P M E N T A N D D I A G N O S T I C S S Y S T E M S h t t p : / / d i a g n o s
Service Brochure. Spare parts / Service Capabilities Engineering / Test Facility
Service Brochure Spare parts / Service Capabilities Engineering / Test Facility Proven Leadership Perth-based Blakers Pumps Engineers became part of global industrial products company ITT Corporation in
Pump Division MNR MND. Absorber Recirculation Pumps. Bulletin PS-10-32 (E)
MNR MND Absorber Recirculation Pumps Bulletin PS-10-32 (E) Pump Supplier To The World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the
PROJECT MANAGEMENT SERVICES
PROJECT MANAGEMENT SERVICES OUR MISSION The Rig Masters mission is to use our experience, knowledge and expertise to become the FIRST CHOICE provider of the following services to the Oil & Gas industry:
American Petroleum Institute Purchasing Guidelines Purchase API Spec 7K online at www.api.org/publications
Purchase API Spec online at www.api.org/publications 7.9.3 Forgings and Castings All repair welding shall be performed in accordance with the manufacturer s written welding specifications. WPSs shall be
3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow
1/6 RE 18309-3/06.10 Replaces: RE 18309-3/04.10 3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow A-VRFC3C-VEI-VS 0M.43.20.80 - Y - Z Description The flow control
301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
Atlas Copco Surface drill rigs. SmartROC T35/ T40. Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 )
Atlas Copco Surface drill rigs SmartROC T35/ T40 Hole diameter: SmartROC T35: 64 115 mm (2 1 /2 4 1 /2 ) SmartROC T40: 76 127 mm (3 5 ) When smart means easy and efficient Main benefits Combines low fuel
GEOTHERMAL DRILLING ABSTRACT
Presented at Short Course V on Conceptual Modelling of Geothermal Systems, organized by UNU-GTP and LaGeo, in Santa Tecla, El Salvador, February 24 - March 2, 2013. GEOTHERMAL TRAINING PROGRAMME LaGeo
Big Rig Spray Systems. Waterproofing Air/Vapor Barrier Commercial Roofing Floor / Protective Coatings
Big Rig Spray Systems Waterproofing Air/Vapor Barrier Commercial Roofing Floor / Protective Coatings Spray equipment packages for your applications We specialize in equipment to spray, dispense, measure,
Fluid Control AS Vision
Fluid Control AS Vision By being fully committed to deliver exceptionally high standards throughout our business, we meet our main objective of being our customer s first choice. Fluid Control AS Business
COMPARISON OF DRILLING TECHNOLOGIES BETWEEN TOP DRIVE AND ROTARY TABLE IN GEOTHERMAL FIELDS: A CASE STUDY OF OLKARIA GEOTHERMAL FIELDS.
Proceedings 5 th African Rift geothermal Conference Arusha, Tanzania, 29-31 October 2014 COMPARISON OF DRILLING TECHNOLOGIES BETWEEN TOP DRIVE AND ROTARY TABLE IN GEOTHERMAL FIELDS: A CASE STUDY OF OLKARIA
The Blocks and Drilling Line
rotary drilling series Unit I, Lesson 5 The Blocks and Drilling Line Third Edition, Revised By L. D. Davis Published by PETROLEUM EXTENSION SERVICE The University of Texas at Austin Division of Continuing
SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.
SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION
Grassroots Drilling. A History and Look Ahead. David Wennerstrom. ICOTA Roundtable October 2005 Canadian Chapter
Grassroots Drilling A History and Look Ahead David Wennerstrom ICOTA Roundtable October 2005 Canadian Chapter In the past 10 years CTD rigs have come to dominate much of the shallow gas drilling market
Rotary Vertical Drilling System (RVDS)
1 Rotary Vertical Drilling System (RVDS) 2 www.micon-drilling.de phone +49.5144.4936.0 Contents Company Profile... 03 MICON Rotary Vertical Drilling System (RVDS)... 04/05 RVDS 7.3/4...06/07 RVDS 10...08/09
Air Eliminators and Combination Air Eliminators Strainers
Description Air Eliminators and Combination Air Eliminator Strainers are designed to provide separation, elimination and prevention of air in piping systems for a variety of installations and conditions.
Your Service Partner Avonmouth and Bristol Service Centres
Your Service Partner Avonmouth and Bristol Service Centres The Sulzer Advantage Avonmouth Service Centre Bristol Service Centre Capabilities Manual machining CNC machining Pump services Thermal spray
Sample Career Ladder/Lattice for Energy (Petroleum Sector)
Click on a job title to see examples of descriptive information about the job. Click on a link between job titles to see the critical development experiences needed to move to that job on the pathway.
Specification for Rotary Drill Stem Elements
Addendum 1 March 2007 Effective Date: September 1, 2007 Specification for Rotary Drill Stem Elements ANSI/API SPECIFICATION 7-1 FIRST EDITION, MARCH 2006 EFFECTIVE DATE: SEPTEMBER 2006 ISO 10424-1:2004
Newland Machine Tool Group Inc.
Newland Machine Tool Group Inc. HEAVY MACHINE TOOLS OVERVIEW Horizontal Boring Mills KB Series T-type HBM with 130 or 165 mm extendable spindle (W-axis), column movable in the spindle direction (Z-axis),
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow
2-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow RE 18309-64/04.10 1/6 Replaces: RE 00171/02.07 A-VRFC2C-VEI-VS-LS 0M.28.03.80 - Y - Z Description
ROTARY DRILLING COMPANY
DHR-200 (Depth Range 4000 m) DHR-200 (Depth Range 4000 m) TF 25 (Romanian) - 1 1/4" drilling line - 602 BAYLOL EDDY Current Brake KANIZSA-00 (DKG) - mast 42 m (17') max. hook load with 10 lines = 200 tons
Variable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
FRIULFORGIA Srl COMPANY PRESENTATION. We shape your world
FRIULFORGIA Srl We shape your world COMPANY PRESENTATION E-mail: info@friulforgia.it - Web: www.friulforgia.it 1 FRIULFORGIA Foundation and facts Friulforgiaisa privatelyheldcompany, whichstarteditsactivitiesin
12000m Extra-deep Well Drilling Rig
12000m Extra-deep Well Drilling Rig Science & Technology Management Department 2013 广 元 巴 中 成 都 南 京 Diagram of Yuanba gas A 6673m A 1000-2000m U 140 CHINA NATIONAL PETROLEUM CORPORATION 12000m Drilling
Oildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)
Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where
drawworks WWL started manufacturing drawworks over 40 years ago under the BDW brand. draw on our experience BDW Model 2000-MX or MXE
Our experience benefits our customers WWL started manufacturing drawworks over 40 years ago under the BDW brand. Within the Oil & Gas drilling industry, the BDW brand is known as the Cadillac of drawworks.
How To Make A Mine Guard Fosil Process
UOP Amine Guard TM FS Technology for Acid Gas Removal 2009 UOP LLC. All rights reserved. UOP 5241B-01 Agenda Overview of the Amine Guard FS process UCARSOL TM Solvent characteristics Amine Guard FS flow
Series TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
Bearing Solutions and Services for Drilling Rigs
Bearing Solutions and Services for Drilling Rigs T h e C o m p a n y The Schaeffler Group your development partner With the wide array of premium-quality products from our FAG and INA brands, Schaeffler
[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
Maersk Resilient. Maximised drilling efficiency and uptime. Optimised for concurrent activities
Maersk Resilient Maximised drilling efficiency and uptime Optimised for concurrent activities Maersk Resilient TYPE MSC CJ50-X100 MC, 350 ft jack-up drilling rig BUILT Keppel FELS, 2008 CLASS American
NAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
STOUCO Drilling Equipment
STOUCO Drilling Equipment Auxiliary Pipe Handling System Type :Stouco.APHS.H.50.C.6 SWL : 5 T travel speed : 0 30 m/min (0-98 ft/min) travel mode : AFT to FWD / FWD to AFT travel distance : ~17 mtr Lift
SERVICE CONTRACT EXECUTION REVAMP & REBUILD
:: :: :: :: SALES SERVICE CONTRACT EXECUTION REVAMP & REBUILD The Pradman Profile Established in 1969 Total Manpower 108+ Focus Industries Steel, Structural Steel Infrastructure Transmission Tower Manufacturing,
BAUER Manufacturing Inc.
BAUER Manufacturing Inc. Conroe, Texas Supplying Equipment and Services to Industry 2/2013 BAUER Manufacturing Inc. BAUER Manufacturing Inc. (BMC) is located in the City of Conroe, Texas, approximately
Rotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO
Rotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO The sum of technology TriAB Air ends The BALMA screw compressors are fitted with the unique TriAB air ends that are designed and
Positive Displacement Motors (PDM)
Positive Displacement Motors (PDM) 2 www.micon-drilling.de phone +49.5144.493671 MICON Downhole-Tools GmbH Breite Horst 19 29336 Nienhagen Germany Tel. +49.5144.493671 Fax +49.5144.493677 service@micon-drilling.de
The Legacy Continues.
The Legacy Continues. The Legacy Continues. The brand of Lee C. Moore, A Woolslayer Company is firmly rooted in the legacy of innovation. Equipment manufactured by Lee C. Moore is on the job for virtually
Cummins. Remanufacturing. Genuine Performance. Every Time.
Cummins Remanufacturing. Genuine Performance. Every Time. Genuine Cummins ReCon Engines And Parts. Cummins engines have a reputation for being virtually indestructible, delivering exceptional value over
Cubility - Facilities and offices
MudCube by Cubility Cubility - Facilities and offices Head office and sales offices Cubility s head office is located in Sandnes, Norway A major part of the oil and gas activity in the North Sea is operated
Standard Hydraulic Piping Flushing Procedure
Page 1 of 6 1.0 Scope This procedure covers the minimum technical requirements for cleaning and flushing of Hydraulic and Piping, and related accessories. 2.0 Introduction In hydraulic fluid power systems,
creating progress for the future
CREATING PROGRESS OFFSHORE creating progress for the future CREATING PROGRESS SCANAOFFSHORE Scana Offshore group of companies will be present at the OTD in Stavanger, October 23-24 2013. The companies
RAMMER HITS FIRST CONTENT COMPACT RANGE 108... 4-7 211... 4-7 315... 4-7 522... 4-7
HAMMERS 1 CONTENT COMPACT RANGE 108... 4-7 211... 4-7 315... 4-7 522... 4-7 RAMMER HITS FIRST The world s best-known and most-respected brand of hydraulic hammers offers a comprehensive range of powerful,
INDIAN STANDARDS FOR NATURAL GAS PIPELINE SYSTEM
INDIAN STANDARDS FOR NATURAL GAS PIPELINE SYSTEM 1. IS 15663(Part 1):2006 This code covers requirements and recommendations for the design, materials, construction and testing of pipelines made of steel
Procurement s Role in Plant Reliability and Safety. Reduce Instrumentation Costs Without Sacrificing Reliability and Safety
Procurement s Role in Plant Reliability and Safety Reduce Instrumentation Costs Without Sacrificing Reliability and Safety TCO Gauges as Alarms MRO Spend ERP New Way Forward Contact Form Distributor Locator
Boom and fly capacities for this machine are listed by the following sections:
Lifting Capacities Telescopic Hydraulic Truck Crane HTC 8650 50 ton (45.36 metric ton) and fly capacities for this machine are listed by the following sections: Fully Extended Outriggers Working Range
Fire Protection Pumps
Experience In Motion Fire Protection Pumps Pump Supplier to the World Flowserve is the driving force in the global industrial pump marketplace. No other pump company in the world has the depth or breadth
NFLB høstkonferansen 2011
part of Aker NFLB høstkonferansen 2011 High Pressure Manifolds & Well Control Arild Grasdal / Knut Bakke Victoria Hotel Stavanger 17. September 2011. 2011 Aker Solutions part of Aker STEP Offshore - Mud
OIL & MARINE PRODUCT RANGE. Dock & onshore Floating roof tank drain Mooring Rig supply
OIL & MARINE PRODUCT RANGE Dock & onshore Floating roof tank drain Mooring Rig supply ALFAGOMMA GROUP A SUCCESS STORY Alfagomma Group, founded in 1956, is a result of a continuous and successful growth:
HYDROSTATIC TEST PUMPS
HYDROSTATIC TEST PUMPS MANUAL HYDROSTATIC TEST PUMPS Ideal for testing residential water lines. Also for pressure testing small pressure tanks, sprinkler, boiler and solar systems. Lightweight and easy
Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations
VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................
COMMITMENT TO EXCELLENCE
PERFORMANCE DRIVEN OPERATIONS IN TEXAS AND OKLAHOMA COMMITMENT TO EXCELLENCE Basin Drilling, LP 1121 ESE Loop 323 Suite 218 Tyler, Texas 75701 (903) 561-8211 (903) 561-5844 fax www.basindrilling.com About
DEUTZ SERVICE Life Time Support
DEUTZ SERVICE Life Time Support DEUTZ SERVICE: LIFE TIME SUPPORT 4 DEUTZ Spare Parts 6 DEUTZ Maintenance 8 DEUTZ Xchange 10 DEUTZ Service Network 12 DEUTZ Emission Management 14 DEUTZ Engine Plus 16 DEUTZ
PACE RIGS. Customized Drilling Solutions
PACE RIGS Customized Drilling Solutions Nabors is committed to shortening the drilling cycle by improving drilling efficiency and safety. We are also committed to providing customized drilling solutions
How to Choose the Right Air Compressor
How to Choose the Right Air Compressor Air compressors have been around for well over 100 years and have as many uses as there are tools that use air. One reason for their popularity is because air as
Manufacturing Industry Improves Overall Control and Forecasting with New Business Management Solution
Microsoft Dynamics Customer Solution Case Study Manufacturing Industry Improves Overall Control and Forecasting with New Business Management Solution Overview Country or Region: India Industry: Manufacturing
2010 APPLICATION REFERENCE GUIDE
2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE
Pr oduct Overview Product Overview SMC Pneumatics BV
Product Overview Terms of Delivery General delivery and payment conditions Applicable to all offers and contract concerning deliveries and/or services to be executed by SMC Pneumatics BV are the ORGALIME
Excellent textile care, water and energy savings in one.
Multi-Housing Laundry Excellent textile care, water and energy savings in one. Carl Necking Campus Manager, Malmö Studenthus, Malmö Offer your tenants easy and reliable washing with the best possible results
ANNEX 4 - IG Rate Comparison TECHNICAL COMPARISON OF CONTRACT TERMS T&T BISSO
ANNEX 4 - IG Rate Comparison TECHNICAL COMPARISON OF CONTRACT TERMS - Version 7 June 2010 (1) Category 1 - vessel adrift TOWHIRE SCOPIC rates with 20% uplift, out-of-pocket expenses at cost plus 15% (2)
Machining Center Equipped with Unparalleled Rigidity and Agility NHX6300
Press Release Mori Seiki Co., Ltd. Head Office: 2-35-16 Meieki, Nakamura-ku, Nagoya City 450-0002, Japan TEL: +81(0)52-587-1830 FAX: +81(0)52-587-1833 January 24, 2013 Machining Center Equipped with Unparalleled
Foam Wiping Technology
Foam Wiping Technology Foam Wiper Darts The foam wiper dart is designed to wipe drillpipe or tubing string clean of cement, fluids, or debris and can be used to separate fluids. The dart has a high parting
Accessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
Maersk Drilling Rig Fleet
Maersk Drilling Maersk Drilling supports global oil and gas production by providing high-efficiency drilling services to oil companies around the world. We command an extensive and technologically advanced
Scana Offshore Technology
Scana Offshore Technology 1 Presentasjon NFLB Vinterkonferansen 2009 Januar 2009 Scana Industry Group Structure 2 Steel Area Marine Area Oil & Gas Area Scana Steel Björneborg AB Scana Volda AS Scana Offshore
Annex A (normative) Supplementary Requirements
Annex A (normative) Supplementary Requirements A.1 SR1 Low-temperature Testing This SR shall apply when specified by the purchaser. In all cases, the purchaser and the manufacturer shall agree upon the
DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing
HEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES
HEAVY DUTY SEVERING AND BEVELLING MACHINE TNO FAB-SERIES PROTEM USA LLC 29340 Industrial Way, # 402 Evergreen, CO 80439 USA Phone: +1 303 955 4862 Fax: +1 303 955 5904 contact@protemusa.com www.protemusa.com
A World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction
Texas Tax for the Oilfield Services Industry
Texas Tax for the Oilfield Services Industry 2012 This teaching manual provides information on general tax issues and is not intended to provide advice on any legal issue or set of facts. This manual and
Graf s Company Profile YOUR IDEAL PARTNER FOR CNG STATIONS
Graf s Company Profile YOUR IDEAL PARTNER FOR CNG STATIONS Graf SpA designs and offers solutions for service stations Compressed Natural Gas (CNG) complete, compact solutions that offer modern and efficient.
PRACTICAL PUMP TECHNOLOGY:
PRACTICAL PUMP TECHNOLOGY: Selection, Applications, Operation, Troubleshooting, and Maintenance INTRODUCTION This seminar will provide a comprehensive understanding of the various types of reciprocating,
3304B. Marine Auxiliary Engine SPECIFICATIONS STANDARD EQUIPMENT ACCESSORY EQUIPMENT PERFORMANCE DATA. 56 bkw (75 bhp) 100 mhp @ 1200 rpm
Marine Auxiliary Engine SPECIFICATIONS 3304B 56 bkw (75 bhp) 100 mhp @ 1200 rpm Shown with Accessory Equipment I-4, 4-Stroke-Cycle-Diesel Emissions...IMO compliant Displacement... 7.0 L (425 cu. in.) Bore...
GE Oil & Gas. Air Cooled Heat Exchangers. Robust and reliable for all loads and applications
GE Oil & Gas Air Cooled Heat Exchangers Robust and reliable for all loads and applications What it is Air cooled heat exchangers are commonly used in industrial applications where a reliable source of
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
Safe management of industrial steam and hot water boilers A guide for owners, managers and supervisors of boilers, boiler houses and boiler plant
Safe management of industrial steam and hot water boilers A guide for owners, managers and supervisors of boilers, boiler houses and boiler plant Health and Safety Safe management of industrial steam and