ROTARY DRILLING COMPANY

Size: px

Start display at page:

Download "ROTARY DRILLING COMPANY"

Kory Fowler
7 years ago
Views:

1 DHR-200 (Depth Range 4000 m) DHR-200 (Depth Range 4000 m) TF 25 (Romanian) - 1 1/4" drilling line BAYLOL EDDY Current Brake KANIZSA-00 (DKG) - mast 42 m (17') max. hook load with 10 lines = 200 tons ( lb) Rig floor height from ground: 4,9 m (16') clear height:,6 m (11,8') casing load capacity: 00 tons (66175 lb) setback capacity: 240 tons ( lb) 2xCat 512 and 1x12VFES 17/27 engines mechanical compound for distributio to mud pumps and drawworks 1x P-100 triplex (Ganz) and 1x CA-700 (Ganz-Marep) pumps driven from compound MRS 27 1/2", driven by drawworks through catworks MC-200 (Romanian) 5 sheaves 200 tons ( lb) capacity CH-200 (Romanian) 200 tons ( lb) capacity 1x20 /4"-000 PSI Cameron "U" single ram 1x1 5/8"-5000 PSI Cameron "U" double ram 1x1 5/8"-5000 PSI Hydril "GK" annular 1x11" PSI Hydril "GK" annular, as required 1x4 1/16" choke - 2 1/16" kill line manifold 5000 PSI with two adjustable manual choke with control. Drilling spools and adapters according to requirements 4 mud tanks: 120 m (756 bbls) complete with LP mixing system, mud agitators 2x Linear Swaco shale shakers, 1x CT-00 desander, 1x10x4" cones mud cleaner (SWACO), 1x SWACO degasser, centrifuges (SWACO) as required 5" OD 19,5 lbs/ft - grade E/G NC-50 1/2" OD 1, lbs/ft - grade E/G NC-8, as required 0x8" OD x 2 1/16" ID spiral 6 5/8" REG 0x6 1/2" OD x 2 1/16" ID spiral NC-50 0x4 /4" OD 2 1/4" ID spiral NC-8 24x5" HWDP NC-50 24x 1/2" HWDP NC-8, as required 1x driller office, 1x tool pusher office, 2x crew cabins Instrumentation - Indication and registration of main drilling paramteres. Emergency generator, compressor station, diesel fuel tank, casing stabbing board, fork lift, gas flare, dog house, pipe rack, kelly spinner, power slip, ezy torque, spinning wrench, as required.

2xCat 512 and 1x12VFES 17/27 engines mechanical compound for distributio to mud pumps and drawworks 1x P-100 triplex (Ganz) and 1x CA-700 (Ganz-Marep) pumps driven from compound MRS 27 1/2", driven

2 IDECO-SBS DIR-5506 IDECO-SBS DIR 5506 mobile drilling and workover rig (Depth range 1800 m) Rig self propelled mechanical-hydraulic, drive-in type, a modification of the original IDECO DIR 5525 Rambler Rig. Equipped with hydraulic telescopic 10 ft mast, double drum drawworks, transmission, engine, and rotary drive unitized on a carrier. H 7 ED IDECO 1" drilling line, hydromatic brake: Model: 122, Fawick Airflex Clutch Catworks: Foster-Model 27 breakout and make - up cat heads KM GH Kwik-lift, hydraulically raised, telescoped mast: 1,5 m (10') max. hook load with 8 lines = 92,8 tons ( lb) Rig floor height from ground,80 m (12,7') clear height:,20 m (11,8') casing load capacity: 92,8 tons ( lb) setback capacity: 95 tons (20945 lb) 1x Cat 406 DITA 80 HP mechanical compound to drawworks 1xPZ-8 (Gardner Denver) triplex pump (stand by) ed by D 98 CAT. LR-175, 17 1/2" rotary table driven by drawworks IDECO shorty UTB sheaves, 110 tons ( lb) capacity IDECO TL-120, 120 tons ( lb) capacity 1x11"-5000 PSI Cameron "U" double ram 1x11"-5000 PSI Hydril "GK"annular One complete set of Cameron 4 1/16"x5000 PSI WP choke and kill manifold mud tanks: 90 m (567 bbls) complete with LP mixing system, mud agitators 2x Ganz double deck as required 1/2" 1, lbs/ft grade F/G NC-8 2 7/8" 10,4 lbs/ft grade E/G NC-1 2 /8" 6,65 lbs/ft grade E/G NC-26 24x4 /4" OD x 2 1/4" ID NC-8 24x 1/2" OD x 1 1/2" ID NC-26 Instrumentation-indication and registration of main workover parameters, compressor station, diesel fuel tank, gas flare, pipe racks, power slip, spinning wrench etc. Sandline dia: 5/8", drum capacity: 4,800 m (15749')

H 7 ED IDECO 1" drilling line, hydromatic brake: Model: 122, Fawick Airflex Clutch Catworks: Foster-Model 27 breakout and make - up cat heads KM 10-212 GH Kwik-lift, hydraulically raised, telescoped

3 IDECO-SBS DIR-806 IDECO-SBS DIR-806 mobile drilling and heavy workover rig A self propelled machanical-hydraulic, drive-in rambler rig, complete in all respect for drilling operations, with drawworks, mast, rig engines and ritary drive unitized on a self propelled, tyre mounted carrier. IDECO H-1000, 1 1/8" drilling line, auxiliary brake: Parmac 22 DP spinning cat head: Forster 27B IDECO-SBS KM AGH, telescoped - mast 4 m (112'). max hook load with 10 lines = 160 tons, (527 lb) set back capacity: 95 tons (20945 lb) Rig floor height from ground,80 m (12,7') clear height:,6 m (11') casing load capacity: 200 tons ( lb) setback capacity: 95 tons (20945 lb) 2x Cat 406 B DITA 480 HP each mechanical compound to drawworks [compound: Allison converter CLBT 5861] 2x PZ-8 (Gardner Denver) triplex pumps (stand by), D-98 ed IDECO ,5" rotary table driven by drawworks IDECO shorty UTB / 5 sheaves, 160 tons (527 lb) capacity IDECO TL tons ( lb) capacity 1x1 5/8"-5000 PSI Cameron "U" double ram 1x1 5/8"-5000 PSI Cameron "A" double ram 1x11" PSI Cameron "U" double ram 1x11" PSI Hydril "GK" annular BOP control system: One complete set of Koomey hydraulic BOP accumulator. One complete set of Cameron 4 1/16"x5000 PSI WP choke and kill manifold 4 mud tanks: 120 m (75 bbls) complete with LP mixing system, mud agitators 1x Baroid double deck and 1x ultra Cagle shale shakers, 1x CT2-00 desander, 1x10x4" cones mud cleaner (SWACO), 1x SWACO degasser, centrifuges (SWACO) as required 5" OD 19,5 lbs/ft grade E/G NC-50 1/2" OD 1, lbs/ft grade E/G NC-8, 0x8" OD x 2 1/16" ID spiral 6 5/8" REG 0x6 1/2"x 2 1/16" ID spiral NC-50 0x4 /4" OD 2 1/4" ID spiral NC-8 24x5" HWDP NC-50 Instrumentation-indication and registration of main workover parameters, compressor station, diesel fuel tank, gas flare, pipe rack, power slip, spinning wrench, hydraulic cathead, sand line dia 5/8", drum capacity 4800 m.

IDECO H-1000, 1 1/8" drilling line, auxiliary brake: Parmac 22 DP spinning cat head: Forster 27B IDECO-SBS KM 112 58 AGH, telescoped - mast 4 m (112').

4 IDECO-SBS DIR-79 IDECO-SBS DIR-79 A self propelled machanical-hydraulic, drive-in rambler rig, complete in all respect for drilling operations, with drawworks, mast, rig propelled, tyre mounted carrier. H 5 ED IDECO 1" drilling line, Brake: PARKERSBURG 15" B KM GHA hydraulically raised telescoped up mast: 27 m (88,5') Rig floor height from ground: m (10') Clear height: 2,5 m (8'), Casing load capacity: 10 tons ( lb) setback capacity: 95 tons (20945 lb) 1 DEUTZ F12L 714, 265 HP mechanical compound to drawworks. PAH-275 (Gardner Denver) triplex pump (Stand by) ed by CAT-408 IDECO LR-175, 17 1/2" rotary table driven by drawworks. IDECO UTB , 4 sheaves, 100 tons ( lb) capacity IDECO TL 120, 120 tons ( lb) capacity 1x7 1/16"-000 PSI Hydril "GK" annular BOP One complete set of Cameron 4 1/16"x5000 PSI WP choke and kill manifold active tanks: 90 m (567 bbls) complete with LP mixing system, mud agitators 2x Ganz double deck as required 2 7/8" 10,4 lbs/ft Grade E/G NC-1 2 /8" 6,65 lbs/ft Grade E/G NC-26 24x4 /4" OD x 2 1/4" ID NC-8 24X 1/2" OD x 1 1/2" ID NC-26 Instrumentation - indication and registration of main drilling parametres, compressor station, diesel fuel tank, gas flare, pipe racks, power slips, spinning wrench, as required. Sandline dia: 5/8", capacity 500 m (1148,5') service platform: 650 mm (2') mm (10')

H 5 ED IDECO 1" drilling line, Brake: PARKERSBURG 15" B KM 90-180 GHA hydraulically raised telescoped up mast: 27 m (88,5') Rig floor height from ground: m (10') Clear height: 2,5 m (8'), Casing load

5 IDECO-SBS DIR-110 IDECO-SBS DIR-110 A self propelled machanical-hydraulic, drive-in rambler rig, complete in all respect for drilling and workover operations, with drawworks, mast, rig engine and rotary drive unitized on a self propelled, tyre mounted carrier. IDECO-SBS Hydrair H5 CK drilling line 1" Brake Parkersburg 15" IDECO-SBS KM GH telescoped up. Height: 27,4 m (90') Rig floor height from ground: m (10') Clear height: 2,5 m (8'), Casing load capacity: 10 tons ( lb), setback capacity: 95 tons (20945 lb) 1x Cat. D-06-B-DITA, 10 HP mechanical compound to drawworks Compound: Allison CLT-754 transmission PAH-275 (Gardner-Denver) triplex pump (Stand by), ed by CAT 408 IDECO LR-175, 17 1/2" rotary table driven by drawworks IDECO UTB , 2 sheaves, 75 tons (16544 lb) capacity IDECO TL 120, 120 tons ( lb) capacity 1x7 1/16"-000 PSI Hydril "GK" annular BOP One complete set of Cameron 4 1/16"x5000 PSI WP choke and kill manifold active tanks: x2=96 m (605 bbls) 86 m (542 bbs) water tank capacity 2x Ganz double deck as required 2 7/8" 10,4 lbs/ft Grade E/G NC-1 2 /8" 6,65 lbs/ft Grade E/G NC-26 24x4 /4" OD x 2 1/4" ID NC-8 24X 1/2" OD x 1 1/2" ID NC-26 Instrumentation - indication and registration of main drilling paramteres, Compressor station, diesel fuel tank, gas flare, pipe rack, power slips, spinning wrench, as required. Sandline dia 5/8", capacity: 500 m (1148,5') service platform: 650 mm (2') mm (10')

Height: 27,4 m (90') Rig floor height from ground: m (10') Clear height: 2,5 m (8'), Casing load capacity: 10 tons (286596 lb), setback capacity: 95 tons (20945 lb) 1x Cat.

6 IRI/IDECO ED RIG IRI/IDECO ED RIG MODEL: IRI/IDECO type ED-1200, two (2) DC motors type GE 752AR / 1000 HP each, Continuous : 1200 HP, Drum grooved for 1 1/4 drilling line, Electric Brake: Baylor Model 502 Model: IRI/IDECO HMF , Height: 142 (4. m), Base width: 21 (6.4 m) Static hook load capacity with 10 lines: 650,000 lbs (295 T) IRI/IDECO type swing-up, height: 0 (9 m) Rotary table load capacity: 650,000 lbs (295 T) Set Back load capacity: 50,000 lbs (159 T) Total load capacity (set back + rotary) 1,000,000 lbs (454 T) Four (4) Diesel Engines: Caterpillar 512, Four (4) AC Generators: KATO 1200 KVA / 600 V / 50 Hz SCR System: ROSS HILL Three () SCR Two (2) IDECO T Each Pump ed by: two (2) DC motors type GE 752AR / 1000 HP each Maximum Working pressure: 5,000 PSI (50 at) IRI/IDECO LR275 driven from drawworks Opening 27 1/2, Load rating 1,400,000 lbs (517 T) Travelling Block + Hook: IRI/IDECO type UTB Rated capacity: 790,000 lbs (60 T) Crown Block: IRI/IDECO Load Capacity: 820,000 lbs (72 T) IRI/IDECO type TL-00, Load capacity: 600,000 lbs (275 T) Working pressure: 5,000 PSI (50 at) Annular Preventer: Cameron type D 1 5/8, 5,000 PSI (50 at) Ram Preventers: One (1) Single Ram 1 5/8 Cameron type U, 10,000 PSI (700 at) One (1) Double Ram 1 5/8 Cameron type U, 10,000 PSI (700 at) Choke manifold: Cameron 10,000 PSI (700 at) BOP Accumulator: Koomey type 80 model MQ SB Active Tanks: Three () total capacity: 1125 bbls. (180 m ) Reserve Tanks: One (1) total capacity: 75 bbls. (60 m ) Trip Tank: One (1) total capacity: 40 bbls. (6.5 m ) Linear Motion Shale Shakers: Three () SWACO type ALS Desander: SWACO type 2-12 Mud Cleaner: SWACO Vacuum Degasser: SWACO M/D TOTCO Instrumentation, Automatic Driller (Satelite), Set of Fishing Tools, Make Up Cathead (Foster 7-AH), Break Out Cathead (Foster 24-AH)

4 m) Static hook load capacity with 10 lines: 650,000 lbs (295 T) IRI/IDECO type swing-up, height: 0 (9 m) Rotary table load capacity: 650,000 lbs (295 T) Set Back load capacity: 50,000 lbs (159 T)

COMMITMENT TO EXCELLENCE

PERFORMANCE DRIVEN OPERATIONS IN TEXAS AND OKLAHOMA COMMITMENT TO EXCELLENCE Basin Drilling, LP 1121 ESE Loop 323 Suite 218 Tyler, Texas 75701 (903) 561-8211 (903) 561-5844 fax www.basindrilling.com About