Helping Our Customers Achieve Superior Results. Top Drive

Size: px
Start display at page:

Download "Helping Our Customers Achieve Superior Results. Top Drive"

Transcription

1 Helping Our Customers Achieve Superior Results Top Drive

2 Intelligent Accessories Canrig s commitment to drilling efficiency has resulted in the development of a line of intelligent top drive accessories. Each blends innovation with excellence in engineering. Advanced Diagnostics System The Advanced Diagnostics System (ADS) monitors strategic points of the top drive unit and its associated control and power system, making intelligent assessments of malfunctions and reporting possible causes. The ADS communicates with the operator via a color monitor with a touch-sensitive screen to respond to messages. This operator interface terminal also allows inputting correction factors and shutdown of non-essential functions in case of equipment failure. Traveling Equipment Anti-Collision System Canrig has developed the Traveling Equipment Anti- Collision System (TAC) which sounds an alarm whenever contact between certain rig components is about to occur. If the alarm sounds and the problem is not corrected, the action in question is stopped utilizing an automatic shutdown device. Two different versions of the system are available, including TAC I for rigs without top drives and TAC II for rigs with top drives. Equipment Condition Monitoring System Equipment Condition Monitoring (ECM) of drilling rig equipment in real time is not only possible but proven to be effective. Using sophisticated sensors, purpose built software and web-based data collection, Canrig can deliver an even greater level of equipment reliability and performance. Enhanced Well Control (Optional) The Lower Well Control Valve (LWCV) actuator is a significant upgrade in reliability and functionality from any similar device. Designed as a replacement for existing actuators, it is field retrofittable to lower well control valves in use today. The dual rack and pinion open / close mechanism is not affected when operation is attempted while the pipe is rotating. The LWCV actuator is capable of functioning values in either direction against 2,500 psi differential pressure. TDSU-Grasshopper (Optional) The TDSU-Grasshopper enables fast and orderly rig-up of the cables and hoses that are required to run from the TDSU to the rig floor. This is accomplished through the use of a hydraulically powered telescoping post combined with a series of articulating cable trays.

3 Top Drive Rig-Up Efficiency Canrig s exclusive folding torque guide enables the safest and fastest rig-up and rig-down in the industry. Folds into a single, transportable skid Installed vertically after mast erection Single-point disconnect allows electrical and hydraulic services to stay with the unit during moves Bolting and flanges are eliminated Minimal rig interface Adjustable telescoping top section Variable-length lower sections Multi-block interface Compact design accommodates shorter masts Canrig is one of the world s leading suppliers of top drive drilling systems for the oil and gas industry. The company manufactures, markets and services a full range of critically engineered portable and fixed top drive systems for most land and offshore rigs. This includes top drives in every size and configuration to meet any drilling application whether marine, desert, jungle or Arctic environments. Canrig top drives are engineered and manufactured to API 8-C standards and carry the API monogram. They set the standard for safety, reliability Canrig top drives set the standard for safety, reliability and efficiency. Superbly engineered products and unparalleled service have moved the company to the forefront of the top drive drilling industry. Systems Configurations Land Portable Systems Exclusive folding torque guide for fastest, safest rig-up Independent VFD house can easily be connected to the rig power source Optional engine-generator system for mechanical or underpowered rigs Land configuration skid with Top Drive Support Unit (TDSU) house grasshopper cable tray and spare parts storage Complete system ships in two self-contained loads Integrated Systems Integrated or stand-alone VFD All electric and hydraulic controls can be fully integrated into rig s master control system Torque can be reacted through mast legs eliminating the need for torque guide Top drive can be permanently fixed into the mast eliminating the need for removal during transport Multiple console options Offshore Fixed torque guide sized with mast or wide flange track Highly adaptable to a variety of torque tracks Retract feature for pipe handling Design includes work platforms for easy, safe access to the top drive Corrosion-resistant coatings and sub assemblies Load capabilities to 750 tons ABS and ATEX certification

4 Footprint Dimensions TD Model A B C D 4017AC-122 (with 8-ft links) 18' 4" 46" 21.5" 39" 6027AC-939 (with 8-ft links) 16' 8" 49" 23.5" 40" 1235AC-500 (with 11-ft links) 20' 54" 26" 48" 8050AC-681 (with 11-ft links) 21' 2" 57" 29" 48" 1250AC-681 (with 11-ft links) 21' 2" 57" 29" 48" 1250AC-685 (with 11-ft links) 22' 4" 57" 29" 48" 1275AC-681 (with 11-ft links) 21' 2" 57" 29" 48" 1275AC-865 (with 11-ft links) 22' 4" 57" 29" 48" 1575AC-865 (with 11-ft links) 22' 4" 57" 30" 48" TOP VIEW Model Performance Load Rating Output Power (Continuous) tons tonnes HP kw AC Top drives 4017AC 6027AC 8050AC 1235AC Gear Ratio : : : :1 Maximum Continuous Torque 21,400 29,000 30,000 40,700 40,250 54,600 37,800 51,200 Maximum Speed RPM Connection Breakout Torque Weight lb kg 32,000 43,400 15,000 6,800 60,000 81,300 18,000 8,200 90, ,000 29,000 13,200 87, ,600 27,000 12,200 Load Rating Output Power (Continuous) tons tonnes HP kw AC Top drives AC 1275AC 1575AC ,500 1,120 Gear Ratio 6.808: : : : :1 Maximum Continuous Torque 51,400 69,700 65,300 88,600 51,400 69,700 65,300 88,600 75, ,700 Maximum Speed RPM Connection Breakout Torque Weight lb kg 29,000 13,200 32,000 15,500 30,000 13,600 32,000 14, , ,000 35,000 15,900 ISOMETRIC VIEW

5 4017AC Torque Curve 1235AC 4017AC Capable of fitting into masts as small as 300k lbs, this unit sets the standard for AC top drives installed in small drilling and workover rigs. 1235AC With its unique performance characteristic, this 1,000-HP unit is ideally suited for high-speed applications. 6027AC Torque Curve 1235AC HP 1200HP AC The only 600-HP top drive in the 250-ton market, this unit delivers 30,000 ft/lbs of continuous drilling torque. 1250AC The most powerful 500-ton top drive on the market. 8050AC 1275AC :1 6.8: AC A 500-ton unit ideally packaged for value and performance. 1275AC Developed for deep drilling applications, this unit is equipped with a 4" bore and 7,500 psi pressure rating. 1575AC AC A 750-ton unit optimized for value and performance. Benefits Integral swivel Hydraulic torque boost Industry exclusive floating quill for soft stabbing and thread-advanced compensation Polymer slide guide runners Counterbalance feature Wireline guide system Direct connection to rig s traveling block Disc brake Pressurized upper seal Remote control pipe handler orientation and lock Bidirectional link tilt function Load path integrity

6 General Information Sales Information Rigline 24/7 (866) Telephone +1 (281) Fax +1 (281) Postal Address Corporate Headquarters 8223 Willow Place Drive South Houston, TX USA 1504

HMIS Top Drive System

HMIS Top Drive System System Description HMIS Top Drive System 250TON HMIS 475HP DOCUMENT NAME: 880025 REV 2 SYSTEM DESCRIPTION COPYRIGHT AND DISCLAIMER Tesco Corporation ("TESCO") has made every effort to ensure that this

More information

Helping Our Customers Achieve Superior Results. Offshore Handling Equipment

Helping Our Customers Achieve Superior Results. Offshore Handling Equipment Helping Our Customers Achieve Superior Results Offshore Handling Equipment Offshore Handling Equipment Product Jack-Up Semi / Drillship Derrick Top Drive / Dolly Retract Drawworks Torque Wrench Drilling

More information

Pipe Cutting and Beveling Clamshells

Pipe Cutting and Beveling Clamshells Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international

More information

Drilling Rigs, Equipment & Parts

Drilling Rigs, Equipment & Parts Drilling Rigs, Equipment & Parts Rig Manufacturing, LLC Manufacturing Solutions Drilling Rig Packages We can offer NEW USA made drilling rig packages in traditional SCR-DC or VFD-AC. These rig packages

More information

Setting a Global Standard. www.dril-quip.com. SingleBore Subsea Completion System

Setting a Global Standard. www.dril-quip.com. SingleBore Subsea Completion System Setting a Global Standard www.dril-quip.com SingleBore Subsea Completion System Dril-quip s Vertical Tree Surface Tree Tubing or Drill Pipe Running String Offshore, Time is Money. Dril-quip s SingleBore

More information

AUTOMATIC HYDRAULIC DRILLING RIGS HH Series HH Series hydraulic hoist series The drilling industry is actively involved in developing new technologies to solve common problems, such as increasing safety

More information

ZF W325 Vertical offset, direct mount marine transmission.

ZF W325 Vertical offset, direct mount marine transmission. Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design

More information

ZF W320 Vertical offset, direct mount marine transmission.

ZF W320 Vertical offset, direct mount marine transmission. Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 425 570 2400 Continuous 357 479 2400 ** Must not be exceeded Description Robust design

More information

301.7D. Mini Hydraulic Excavator

301.7D. Mini Hydraulic Excavator 301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb

More information

Welcome at Aker Wirth

Welcome at Aker Wirth part of Aker Welcome at Aker Wirth NFLF Winter Conference 12.-14.03.2010 Drilling Facilities Upgrade 2009 Aker Solutions part of Aker Aker Wirth OILFIELD DRILLING EQUIPMENT New Technology / Drilling facilities

More information

OILFIELD & MARINE INC.

OILFIELD & MARINE INC. OILFIELD & MARINE INC. Automated Drilling Systems Driller s Cabins Driller s Chair Driller s Console Power Houses AC Generator Line-Up Control Systems SCR Drive Line-Up Top Drive Line-Up VFD Line-Up Third-Party

More information

ZF 25. Marine Propulsion Systems

ZF 25. Marine Propulsion Systems Marine Propulsion Systems Vertical offset, direct mount marine transmission. Description Reverse reduction marine transmission with hydraulically actuated multi-disc clutches. Suitable for high performance

More information

COMPACT. Drilling COMPACT

COMPACT. Drilling COMPACT COMPACT Our latest machine development still produced here in our own factory. This machine combines all our previous experience and knowledge in building drilling machines but at a reduced cost base.

More information

Aker Drilling Riser Brazil

Aker Drilling Riser Brazil part of Aker Brazil Presenter Marcelo Coraça Project Manager June/2010 2010 Aker Solutions Aker Solutions Rio das Ostras Aker Riser workshop Aker Subsea workshop Aker MH workshop General Offices Meeting

More information

RODADEACO. Diesel Engine Air Intake Shutoff Valves. Model RDS1 Swing Gate Valve. by AMOT. Overview. Typical Applications. Key Features and Benefits

RODADEACO. Diesel Engine Air Intake Shutoff Valves. Model RDS1 Swing Gate Valve. by AMOT. Overview. Typical Applications. Key Features and Benefits Diesel Engine Air Intake Shutoff Valves Model RDS1 Swing Gate Valve Overview If flammable gas or vapor is present in the atmosphere surrounding a diesel engine, it can be ingested into the engine and become

More information

SPACIOUS CABIN TEMPERATURE TELESCOPIC

SPACIOUS CABIN TEMPERATURE TELESCOPIC THE ISEKI DIFFERENCE When you choose Iseki, you re not simply buying a tractor, you re investing in 80 years of industry-leading engineering and manufacturing experience. Experience that continues to produce

More information

Electrical Rig Up. Gregg White Sales Director Office:713-676-2588 Cell:713-292-4580 G.White@Supreme-Electrical.com

Electrical Rig Up. Gregg White Sales Director Office:713-676-2588 Cell:713-292-4580 G.White@Supreme-Electrical.com Electrical Rig Up Drag Chain and Grasshopper Durable Panel Labeling For Sales Information, please contact: Gregg White Sales Director Office:713-676-2588 Cell:713-292-4580 G.White@Supreme-Electrical.com

More information

ZF 220 A 10 Down angle, direct mount marine transmission.

ZF 220 A 10 Down angle, direct mount marine transmission. Marine Propulsion Systems 10 Down angle, direct mount marine transmission. Maximum Input** Duty kw hp RPM Pleasure 419 562 4500 Light 394 528 4500 Medium 335 449 4500 Continuous 192 258 3200 ** Must not

More information

Measurement & Analytics. VIS Multiphase Flow Meter High gas content applications solved with no radioactive source - Measurement made easy

Measurement & Analytics. VIS Multiphase Flow Meter High gas content applications solved with no radioactive source - Measurement made easy Measurement & Analytics VIS Multiphase Flow Meter High gas content applications solved with no radioactive source - Measurement made easy ABB s VIS Multiphase Flow Meter Easy to operate, accurate and fieldproven

More information

Azimuth thrusters. propulsors

Azimuth thrusters. propulsors Azimuth s Rolls-Royce is a global leader in the supply of azimuth s. In an azimuth the propeller rotates 360 around the vertical axis so the unit provides propulsion, steering and positioning thrust for

More information

Series TMM Axial Piston Motor. Technical Information

Series TMM Axial Piston Motor. Technical Information Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer

More information

HPHT CAPPING STACKS AND NEW TECHNOLOGY FOR SUBSEA WELL CONTROL. December 3, 2014 Presenter: Mike Cargol

HPHT CAPPING STACKS AND NEW TECHNOLOGY FOR SUBSEA WELL CONTROL. December 3, 2014 Presenter: Mike Cargol HPHT CAPPING STACKS AND NEW TECHNOLOGY FOR SUBSEA WELL CONTROL December 3, 2014 Presenter: Mike Cargol Agenda Development Update HPHT Capping Stack Mudline Closure Device Divert and Flow System Well Kill

More information

ZF 301 A. Marine Propulsion Systems

ZF 301 A. Marine Propulsion Systems Marine Propulsion Systems 10 Down angle, direct mount marine transmission. Description Robust design also withstands continuous duty in workboat applications. Fully works tested, reliable and simple to

More information

Valve Remote Control Systems Centralized Hydraulics for marine vessels and offshore installations

Valve Remote Control Systems Centralized Hydraulics for marine vessels and offshore installations Valve Remote Control Systems Centralized Hydraulics for marine vessels and offshore installations PLEIGER MASCHINENBAU _Hydraulic Actuators STK _Power Packs _Solenoid Valve Cabinet and Process Control

More information

ZF 85 IV. Marine Propulsion Systems

ZF 85 IV. Marine Propulsion Systems Marine Propulsion Systems 12 V-drive, direct mount marine transmission. Maximum Input** Duty kw hp RPM Pleasure 389 522 3500 Light 365 489 3500 Medium 311 416 3500 Continuous 232 311 3200 ** Must not be

More information

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure 2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts

More information

Tyco PremiAir Pneumatic Actuators

Tyco PremiAir Pneumatic Actuators A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either

More information

Blue Logic Auto Release STAVANGER 2015

Blue Logic Auto Release STAVANGER 2015 Blue Logic Auto Release STAVANGER 2015 ENTREPRENEUR BACKGROUND Eirik Kloster Jacobsen Bryne Mekanikk, Hitec-Subsea, Ifokus, Oceaneering, Statoil, Blue Logic. Lars Gunnar Hodnefjell Laerdal, UDS, Hitec-subsea,

More information

HEAVY-DUTY, REDEFINED. REDEFINED.

HEAVY-DUTY, REDEFINED. REDEFINED. HEAVY-DUTY, REDEFINED. TO GET YOUR TOUGHEST JOBS DONE, you need an engine that works even harder than you do. That s why Caterpillar offers the CT13 engine for our vocational trucks. It delivers every

More information

ZF 286 A 7 Down angle, direct mount marine transmission.

ZF 286 A 7 Down angle, direct mount marine transmission. Marine Propulsion Systems 7 Down angle, direct mount marine transmission. Maximum Input** Duty kw hp RPM Pleasure 566 758 3300 Light 509 682 3300 Medium 380 509 3300 Continuous 345 463 3300 ** Must not

More information

JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220

JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 JCB TELESCOPIC WHEELED LOADERS TM180 AND TM220 Incredible versatility is achieved through compact dimensions and the additional lift height provided by a telescopic boom The manoeuvrability of articulated

More information

10 Wireline operations

10 Wireline operations 10 WIRELINE OPERATIONS... 1 10.1 GENERAL... 1 10.2 WELL BARRIER SCHEMATICS... 1 10.3 WELL BARRIER ACCEPTANCE CRITERIA... 1 10.3.1 Well control equipment configuration... 1 10.3.2 Deployment of toolstrings...

More information

THE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS. New Model Presentation - VR85

THE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS. New Model Presentation - VR85 THE ONLY CRANE WITH 10 HYDRAULIC EXTENSIONS New Model Presentation In this presentation, we will outline the innovations and technical advances integrated into the new 90 tonne metre crane of the Amco

More information

COMMITMENT TO EXCELLENCE

COMMITMENT TO EXCELLENCE PERFORMANCE DRIVEN OPERATIONS IN TEXAS AND OKLAHOMA COMMITMENT TO EXCELLENCE Basin Drilling, LP 1121 ESE Loop 323 Suite 218 Tyler, Texas 75701 (903) 561-8211 (903) 561-5844 fax www.basindrilling.com About

More information

RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features:

RT100 ROUGH TERRAIN CRANE DATASHEET - IMPERIAL. Features: ROUGH TERRAIN CRANE DATASHEET - IMPERIAL Features: Rated capacity: 100 ton @ 10 ft working radius Maximum boom length: 174 ft Maximum tip height: 183 ft Maximum hook height: 174.5 ft CONTENTS Key............................................................................................

More information

NAGEL ECO 180 FLEXIBLE HONING SYSTEM

NAGEL ECO 180 FLEXIBLE HONING SYSTEM NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS

More information

Turbocharger system components, servicing

Turbocharger system components, servicing 21-1 Turbocharger system components, servicing Engine codes: AAZ, 1Z, AHU Observe rules of cleanliness Page 21-10 Turbocharger hoses and lines, connecting Page 21-11 WARNING! Do not re-use any fasteners

More information

Automatic Fire Fighting Monitors

Automatic Fire Fighting Monitors Automatic Fire Fighting Monitors Fire Protection Solutions Automatic Fire Fighting Monitors Foreword Automatic monitors are devices used to deliver large amounts of water or water/foam solution to remote

More information

ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW

ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW ŠKODA MACHINE TOOL HORIZONTAL MILLING AND BORING MACHINES ŠKODA HCW KODA HCW TRADITION AND EXPERIENCE The ŠKODA machine tools of different types and design have been present in the world market since the

More information

Drilling fleet. Capabilities. Agriculture. Water. Environment.

Drilling fleet. Capabilities. Agriculture. Water. Environment. Drilling fleet Capabilities Agriculture. Water. Environment. Drilling fleet Overview The Gilbert & Sutherland drilling fleet includes an EDECO Model 10s mounted on a one-tonne, four-wheel drive multi-function

More information

Drilling, Workover & Well Servicing Rigs

Drilling, Workover & Well Servicing Rigs Drilling, Workover & Well Servicing Rigs 1 Stewart & Stevenson Drilling, Workover & Well Servicing Equipment for the Oilfield Stewart & Stevenson s Crown model drilling, workover and well servicing equipment

More information

Welding Reels HANNAY REELS. For use for: Arc Welding Gas Welding Cutting Operations H-9422-W Rev. 5. The reel leader.

Welding Reels HANNAY REELS. For use for: Arc Welding Gas Welding Cutting Operations H-9422-W Rev. 5. The reel leader. Welding Reels HANNAY REELS For use for: The reel leader. Arc Welding Gas Welding Cutting Operations H-9422-W Rev. 5 Series SWCR/WCR Arc Welding Reels: Power or Manual Rewind To handle cable to 400 amps.

More information

Miller Engineered Solutions Customized Fall Protection Solutions. NEW! Now featuring Rigid Rail Systems

Miller Engineered Solutions Customized Fall Protection Solutions. NEW! Now featuring Rigid Rail Systems Miller Engineered Solutions Customized Fall Protection Solutions NEW! Now featuring Rigid Rail Systems Custom systems for fall protection needs Vast network of trained and certified installer partners

More information

RIVET BUSTERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.

RIVET BUSTERS. 9949 Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A. S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1038 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill and attach an in-line oiler to the air tool. Use air

More information

2013 Jetters. Ph: 800.771.1881 Fax: 877.526.3246. sales@sharkpw.com www.sharkpw.com. Effective January 1, 2013

2013 Jetters. Ph: 800.771.1881 Fax: 877.526.3246. sales@sharkpw.com www.sharkpw.com. Effective January 1, 2013 2013 Jetters BROCHURE Effective January 1, 2013 Ph: 800.771.1881 Fax: 877.526.3246 sales@sharkpw.com www.sharkpw.com 2013 shark Jetters Brochure PH: 800.771.1881 FAX: 877-526-3246 JETTERS drain cleaners

More information

Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled

Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled Machine bolt shut-off nozzle type BHP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Bolt shut-off with integrated 2-way actuator pneumatically

More information

Brochure. Electric generators to power the world

Brochure. Electric generators to power the world Brochure Electric generators to power the world We provide motors and generators, services and expertise to save energy and improve customers processes over the total life cycle of our products, and beyond.

More information

Industrial Electric Monitors. Industrial

Industrial Electric Monitors. Industrial Industrial Electric Monitors Corrosion resistant monitors with maximum travel for optimal coverage in industrial, mining and marine environments. Severe-Duty Monitor 750 GPM (2900 LPM) The Severe-Duty,

More information

Oildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)

Oildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where

More information

KNC Model 3666 Automatic Pressure Calibration System

KNC Model 3666 Automatic Pressure Calibration System KNC Model 3666 Automatic Pressure Calibration System Product Description The Model 3666 Automatic Pressure Calibration (APC) System by King Nutronics Corporation is a portable secondary standards laboratory

More information

Parker Subsea Drilling. BOP Umbilicals, Hotlines and Stack Hoses

Parker Subsea Drilling. BOP Umbilicals, Hotlines and Stack Hoses Parker Subsea Drilling BOP Umbilicals, Hotlines and Stack Hoses One Source for all Hydraulic BOP Connections From topside connections, to plumbing the stack, Parker offers premier hose solutions for every

More information

Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing

Volkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed Gearshift cable/lever installing Gearshift housing repairing Gearshift lever repairing lever/relay lever, installing Gearshift mechanism

More information

Minimum Breaking Force of Wire Rope (for Winches) 6 x 19 Classification / Bright (Uncoated), IWRC

Minimum Breaking Force of Wire Rope (for Winches) 6 x 19 Classification / Bright (Uncoated), IWRC Minimum Breaking Force of Wire Rope (for Winches) 6 x 19 Classification / Bright (Uncoated), IWRC Wire rope Selection Rope Size (in) Approximate Weight (lb / ft) Minimum Breaking Force Extra Improved Plow

More information

Hydraulic Control Solutions

Hydraulic Control Solutions Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district

More information

The Legacy Continues.

The Legacy Continues. The Legacy Continues. The Legacy Continues. The brand of Lee C. Moore, A Woolslayer Company is firmly rooted in the legacy of innovation. Equipment manufactured by Lee C. Moore is on the job for virtually

More information

Providing Answers For All Your Machine Tool Needs

Providing Answers For All Your Machine Tool Needs Providing Answers For All Your Machine Tool Needs STANDARD FEATURES FANUC MXP-200FA CONTROL Spindle Features Body Structure POWERFUL 20 HP H / L SHIFTING SPINDLE MOTOR HARDENED & GROUND BOXWAY CONSTRUCTION

More information

2010 APPLICATION REFERENCE GUIDE

2010 APPLICATION REFERENCE GUIDE 2010 APPLICATION REFERENCE GUIDE INDEX QUALITY POLICY 2 ERGO ASSIST STANDARD 4-13 CUSTOM 14-18 END EFFECTORS 19-24 LIFT ASSIST 25-41 FIXTURED TOOLS 42-53 FIXTURES 54-63 ASSEMBLY TABLES 64-72 CARTS/ DUNNAGE

More information

TDS -11SA. Top Drive Drilling System 800 HP/500 TON 700 HP/500 TON. Technical Bulletin. Rev. A 1

TDS -11SA. Top Drive Drilling System 800 HP/500 TON 700 HP/500 TON. Technical Bulletin. Rev. A 1 TDS -11SA Top Drive Drilling System 800 HP/500 TON or 700 HP/500 TON Technical Bulletin April 1998 Rev. A 1 2 TDS-11SA Top Drive Drilling System April, 1998 Technical Bulletin This document contains information,

More information

PACE RIGS. Customized Drilling Solutions

PACE RIGS. Customized Drilling Solutions PACE RIGS Customized Drilling Solutions Nabors is committed to shortening the drilling cycle by improving drilling efficiency and safety. We are also committed to providing customized drilling solutions

More information

Operating, Installation, and Maintenance Instructions

Operating, Installation, and Maintenance Instructions ELKHART BRASS MFG. CO., INC. 1302 WEST BEARDSLEY AVENUE P.O. BOX 1127 ELKHART IN 46515 (574) 295-8330 FAX (574) 293-9914 Operating, Installation, and Maintenance Instructions RAM Personal Portable Monitor

More information

Cooling system components, removing and installing

Cooling system components, removing and installing Page 1 of 34 19-1 Cooling system components, removing and installing WARNING! The cooling system is pressurized when the engine is warm. When opening the expansion tank, wear gloves and other appropriate

More information

POWER AND MOTION CONTROL FOR SUBSEA APPLICATIONS

POWER AND MOTION CONTROL FOR SUBSEA APPLICATIONS POWER AND MOTION CONTROL FOR SUBSEA APPLICATIONS - HYDRAULICS - PNEUMATICS - ELECTROMECHANICS - SLIDING BEARINGS WWW.SERVI.NO LEADING SUPPLIER OF POWER AND MOTION CONTROL WITH A CENTURY OF EXPERIENCE -

More information

Texas Oil Tools Subsea Well Intervention Equipment

Texas Oil Tools Subsea Well Intervention Equipment Texas Oil Tools Subsea Well Intervention Equipment Leading specialty manufacturers and suppliers of pressure control equipment At NOV, we ve come a long way in establishing ourselves as one of the leading

More information

DOEN THRUSTMASTER WATER JETS. 100 Series. 100kW to 900kW. History. Innovation. Power. thrustmaster.net

DOEN THRUSTMASTER WATER JETS. 100 Series. 100kW to 900kW. History. Innovation. Power. thrustmaster.net THRUSTMASTER 100 Series 100kW to 900kW History. Innovation. Power. thrustmaster.net THRUSTMASTER FEATURES PERFORMANCE DURABILITY POWER FLEXIBILITY CONTROL Integral Reduction Box Providing perfect impeller

More information

2003 ACCORD - Automatic Transmission Removal

2003 ACCORD - Automatic Transmission Removal 2003 ACCORD - Automatic Transmission Removal Special Tools Required Engine support hanger, A and Reds AAR-T-12566 Engine hanger balancer bar VSB02C000019 Front subframe adapter VSB02C000016 These special

More information

Subsea Drilling Systems

Subsea Drilling Systems Subsea Drilling Systems 2 Reliable, cost-effective solutions for offshore drilling... FMC Technologies Subsea Drilling Systems lead the industry with reliable and cost-effective drilling solutions which

More information

Tiguan Haldex All-Wheel Drive

Tiguan Haldex All-Wheel Drive Service Training Self Study Program 861803 Tiguan Haldex All-Wheel Drive Volkswagen of America, Inc. Volkswagen Academy Printed in U.S.A. Printed 3/2008 Course Number 861803 2008 Volkswagen of America,

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

4500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty

4500 SERIES. 97% Customer Satisfaction Rating 98% Customer Loyalty Rating. #1 Selling Tractor in the World 5-year Powertrain Warranty 4500 SERIES #1 Selling Tractor in the World 5-year Powertrain Warranty 97% Customer Satisfaction Rating 98% Customer Loyalty Rating DEMING PRIZE 2003 JAPAN QUALITY MEDAL 2007 ECONOMY - 4500 Series The

More information

Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling

Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling Pump Specifications 250 Series Submersible Sump / Effluent Pump 2 Solids handling 250_P1 R10/7/2015 Copyright 2015 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.

More information

Maersk Resilient. Maximised drilling efficiency and uptime. Optimised for concurrent activities

Maersk Resilient. Maximised drilling efficiency and uptime. Optimised for concurrent activities Maersk Resilient Maximised drilling efficiency and uptime Optimised for concurrent activities Maersk Resilient TYPE MSC CJ50-X100 MC, 350 ft jack-up drilling rig BUILT Keppel FELS, 2008 CLASS American

More information

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg

S KID S TEER L OADER SK818-5 SK818-5 SK 818-5. NET POWER SAE J1349 34,7 kw. OPERATING WEIGHT 2.910 kg. OPERATING CAPACITY 870 kg SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation

More information

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry.

SPEEDROC D30. Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEEDROC D0 Surface Drill Rig for marble, granite, sandstone and limestone in the dimension stone industry. SPEED UP YOUR PROFITS SPEEDROC D0 IS A VERSATILE AND FLEXIBLE DRILL RIG, TAILORMADE FOR THE DIMENSION

More information

STOUCO Drilling Equipment

STOUCO Drilling Equipment STOUCO Drilling Equipment Auxiliary Pipe Handling System Type :Stouco.APHS.H.50.C.6 SWL : 5 T travel speed : 0 30 m/min (0-98 ft/min) travel mode : AFT to FWD / FWD to AFT travel distance : ~17 mtr Lift

More information

Newland Machine Tool Group Inc.

Newland Machine Tool Group Inc. Newland Machine Tool Group Inc. HEAVY MACHINE TOOLS OVERVIEW Horizontal Boring Mills KB Series T-type HBM with 130 or 165 mm extendable spindle (W-axis), column movable in the spindle direction (Z-axis),

More information

creating progress for the future

creating progress for the future CREATING PROGRESS OFFSHORE creating progress for the future CREATING PROGRESS SCANAOFFSHORE Scana Offshore group of companies will be present at the OTD in Stavanger, October 23-24 2013. The companies

More information

SISTO-16TWA/HWA/DLU. Type Series Booklet

SISTO-16TWA/HWA/DLU. Type Series Booklet Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents

More information

Product Specification instalert Rapid Messenger Variable Message Sign

Product Specification instalert Rapid Messenger Variable Message Sign instalert 2 units to cover any application instalert 18 (ia18): 18 x 28 full matrix instalert 24: (ia24): 24 x 60 full matrix Size, Weight without battery ia18: 30 x 20 x 2.74, 29 lbs ia24: Folds to fits

More information

CRANES WINCHES WINDLASSES CAPSTANS

CRANES WINCHES WINDLASSES CAPSTANS CRANES WINCHES WINDLASSES CAPSTANS COMMERCIAL MARINE OFFSHORE OIL GOVERNMENT CUSTOM APPLICATIONS Custom Manufacturing. Absolute Quality. Appleton Marine has continued to supply custom marine deck machinery

More information

ST1000 Series Air Starters

ST1000 Series Air Starters ST1 Series Air Starters Distributed by: Ingersoll Rand Industrial Technologies provides products, services, and solutions that enhance our customers energy efficiency, productivity, and operations. Our

More information

SELECTION, APPLICATION & MAINTENANCE

SELECTION, APPLICATION & MAINTENANCE DIESEL PROTECTION SYSTEMS TPZ Engine Air Intake Shut Down Valves (Combined Automatic Overspeed and Air Pressure Operated Shut Down Bendix Types) SELECTION, APPLICATION & MAINTENANCE Valve Numbers TPZ-101

More information

High Capacity Helical Piles Limited Access Projects

High Capacity Helical Piles Limited Access Projects High Capacity Helical Piles Limited Access Projects Tel 403 228-1767 Canada, USA, Russia Brendan ODonoghue 519 830-6113 Presentation Summary 1. Helical piles Background on large diameter shafts and helices

More information

Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled

Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator

More information

RANGE OF HYDRAULIC BOLT TENSIONERS

RANGE OF HYDRAULIC BOLT TENSIONERS RANGE OF HYDRAULIC BOLT TENSIONERS TensionMax The Next Generation of Bolt Tensioners has Arrived Hydratight, one of the world s leading bolt tensioning and joint integrity companies, introduces TensionMax.

More information

Total Subsea Solutions

Total Subsea Solutions Total Subsea Solutions Total Subsea Solutions Developing new energy reserves, managing, and improving producing fields means an unprecedented number of technical challenges. In partnership with our customers,

More information

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing

More information

AESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN

AESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN manufactures two self-erecting silos called the WM-Series. The WM-50 has a 50-ton silo and the WM-80 has an 80-ton. The WM Series comes complete

More information

160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ)

160 ATJ 180 ATJ. 16,25 m (160 ATJ) 17,65 m (180 ATJ) 9,10 m (160 ATJ) 10,60 m (180 ATJ) 160 ATJ 180 ATJ 160 ATJ 180 ATJ MANITOU, the world leader in materials handling, has the ability to accompany you on all types of terrain. The 160 and 180ATJ models have been developed to respond to all

More information

V52-850 kw The turbine that goes anywhere

V52-850 kw The turbine that goes anywhere V2-8 kw The turbine that goes anywhere Versatile, efficient, dependable and popular The highly efficient operation and flexible configuration of the V2 make this turbine an excellent choice for all kinds

More information

Roll Handling By Jeff Damour CONVERTER ACCESSORY CORPORATION Wind Gap, PA USA

Roll Handling By Jeff Damour CONVERTER ACCESSORY CORPORATION Wind Gap, PA USA Roll Handling By Jeff Damour CONVERTER ACCESSORY CORPORATION Wind Gap, PA USA Introduction This presentation is a basic tutorial in the mechanics of roll handling. We will discuss: 1) What is roll handling?

More information

Ingersoll-Rand LIFTSTAR. Manriding Winches. Classification and compliance with safety requirements

Ingersoll-Rand LIFTSTAR. Manriding Winches. Classification and compliance with safety requirements Classification and compliance with safety requirements Meet the toughest personnel lifting requirements in the offshore industry The LIFTSTAR RLP Manriding winches are designed to the toughest type approval

More information

N-PUMP SERIES FOR MAXIMUM RELIABILITY AND EFFICIENCY IN WASTEWATER HANDLING. Flygt

N-PUMP SERIES FOR MAXIMUM RELIABILITY AND EFFICIENCY IN WASTEWATER HANDLING. Flygt N-PUMP SERIES FOR MAXIMUM RELIABILITY AND EFFICIENCY IN WASTEWATER HANDLING Flygt The Concept N-Pump series. Bringing NEW levels of efficiency to wastewater handling applications Reduced pumping efficiency,

More information

1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater.

1 Air-to-Air AfterCooling. 2 Engine Only. Capacity will vary with radiator size and use. of cab heater. Diesel Truck Engine 3126B 175-330 hp 420-860 @ 1440 rpm Peak CATERPILLAR ENGINE SPECIFICATIONS 6-Cylinder, 4-Stroke-Cycle Diesel Bore in (mm)... 4.33 (110) Stroke in (mm)... 5.0 (127) Displacement cu in

More information

Industrial Monitors. Weight lbs. (Kg) Style. 55* (24.9 kg) 14"** (356 mm) * Less nozzle ** Less handle. Weight lbs. (kg) Style. 21 3 / 16"** (538 mm)

Industrial Monitors. Weight lbs. (Kg) Style. 55* (24.9 kg) 14** (356 mm) * Less nozzle ** Less handle. Weight lbs. (kg) Style. 21 3 / 16** (538 mm) Industrial Monitors Omega XP Monitor The Omega XP brass monitor offers maximum travel for optimal coverage in industrial and marine environments. AKRON BRASS COMPANY PH. 800.228.1161 (330.264.5678) FAX

More information

ATM SECURITY ATM CASSETTE GUARD KEY FEATURES. High security Rapid installation Simple operation Time locks & delays Proven track record

ATM SECURITY ATM CASSETTE GUARD KEY FEATURES. High security Rapid installation Simple operation Time locks & delays Proven track record ATM SECURITY ATM CASSETTE GUARD KEY FEATURES High security Rapid installation Simple operation Time locks & delays Proven track record ATM SECURITY ATM CASSETTE GUARD n High resistance to physical attacks

More information

A descriptive definition of valve actuators

A descriptive definition of valve actuators A descriptive definition of valve actuators Abstract A valve actuator is any device that utilizes a source of power to operate a valve. This source of power can be a human being working a manual gearbox

More information

Positive Displacement Motors (PDM)

Positive Displacement Motors (PDM) Positive Displacement Motors (PDM) 2 www.micon-drilling.de phone +49.5144.493671 MICON Downhole-Tools GmbH Breite Horst 19 29336 Nienhagen Germany Tel. +49.5144.493671 Fax +49.5144.493677 service@micon-drilling.de

More information

IR-Zimmerman Lifting Equipment Product Overview

IR-Zimmerman Lifting Equipment Product Overview IR-Zimmerman Lifting Equipment Product Overview Handling Devices Torque Reaction Products Irax Spring Balancers Quantum Electric Chain Hoists End Effectors The real workhorse of material handling equipment

More information

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1

SKID STEER LOADER CK20-1 / CK30-1 20-1 30-1 CK20-1 / CK30-1 OPERATING WEIGHT CK20-1: 3.750 kg - CK30-1: 4.290 kg OPERATING CAPACITY CK20-1: 930 kg - CK30-1: 1.130 kg ENGINE POWER CK20-1: 52,1 kw / 69,9 HP @ 2.500 rpm CK30-1: 63,9 kw / 85,7 HP @

More information

Material-Handling Vehicles Innovative Drivetrain Solutions

Material-Handling Vehicles Innovative Drivetrain Solutions Material-Handling Vehicles Innovative Drivetrain Solutions Axles Driveshafts Transmissions and Controls Complete Systems Hybrid Solutions Construction Agriculture Mining Forestry Material Handling Drivetrain

More information